From e5f45b011e4a86d62fb3d9d9a634ec30a3027649 Mon Sep 17 00:00:00 2001 From: "Fabio M. De Francesco" Date: Thu, 14 Apr 2022 12:32:17 +0200 Subject: [PATCH] staging: Remove the drivers for the Unisys s-Par The Unisys sub-tree of drivers/staging contains three drivers for the "Unisys Secure Partition" (s-Par(R)): visorhba, visorinput, visornic. They have no maintainers, in fact the only one that is listed in MAINTAINERS has an unreacheable email address. During 2021 and 2022 several patches have been submitted to these drivers but nobody at Unisys cared of reviewing the changes. Probably, also the "sparmaintainer" internal list of unisys.com is not anymore read by interested Unisys' engineers. Therefore, remove the drivers/staging/unisys directory and delete the relevant entries in the MAINTAINERS, Kconfig, Makefile files, then remove also the drivers/visorbus directory which is not anymore needed (it contained the driver for the virtualized bus for the Unisys s-Par firmware). Cc: David Kershner Cc: Cc: Ken Cox Suggested-by: Greg Kroah-Hartman Signed-off-by: Fabio M. De Francesco Link: https://lore.kernel.org/r/20220414103217.32058-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 8 - drivers/Kconfig | 2 - drivers/Makefile | 1 - drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - .../ABI/sysfs-platform-visorchipset | 89 - .../staging/unisys/Documentation/overview.txt | 337 --- drivers/staging/unisys/Kconfig | 16 - drivers/staging/unisys/MAINTAINERS | 5 - drivers/staging/unisys/Makefile | 7 - drivers/staging/unisys/TODO | 16 - drivers/staging/unisys/include/iochannel.h | 571 ----- drivers/staging/unisys/visorhba/Kconfig | 15 - drivers/staging/unisys/visorhba/Makefile | 10 - .../staging/unisys/visorhba/visorhba_main.c | 1142 --------- drivers/staging/unisys/visorinput/Kconfig | 16 - drivers/staging/unisys/visorinput/Makefile | 7 - .../staging/unisys/visorinput/visorinput.c | 788 ------ drivers/staging/unisys/visornic/Kconfig | 16 - drivers/staging/unisys/visornic/Makefile | 10 - .../staging/unisys/visornic/visornic_main.c | 2131 ----------------- drivers/visorbus/Kconfig | 15 - drivers/visorbus/Makefile | 10 - drivers/visorbus/controlvmchannel.h | 650 ----- drivers/visorbus/vbuschannel.h | 95 - drivers/visorbus/visorbus_main.c | 1234 ---------- drivers/visorbus/visorbus_private.h | 48 - drivers/visorbus/visorchannel.c | 434 ---- drivers/visorbus/visorchipset.c | 1691 ------------- 29 files changed, 9367 deletions(-) delete mode 100644 drivers/staging/unisys/Documentation/ABI/sysfs-platform-visorchipset delete mode 100644 drivers/staging/unisys/Documentation/overview.txt delete mode 100644 drivers/staging/unisys/Kconfig delete mode 100644 drivers/staging/unisys/MAINTAINERS delete mode 100644 drivers/staging/unisys/Makefile delete mode 100644 drivers/staging/unisys/TODO delete mode 100644 drivers/staging/unisys/include/iochannel.h delete mode 100644 drivers/staging/unisys/visorhba/Kconfig delete mode 100644 drivers/staging/unisys/visorhba/Makefile delete mode 100644 drivers/staging/unisys/visorhba/visorhba_main.c delete mode 100644 drivers/staging/unisys/visorinput/Kconfig delete mode 100644 drivers/staging/unisys/visorinput/Makefile delete mode 100644 drivers/staging/unisys/visorinput/visorinput.c delete mode 100644 drivers/staging/unisys/visornic/Kconfig delete mode 100644 drivers/staging/unisys/visornic/Makefile delete mode 100644 drivers/staging/unisys/visornic/visornic_main.c delete mode 100644 drivers/visorbus/Kconfig delete mode 100644 drivers/visorbus/Makefile delete mode 100644 drivers/visorbus/controlvmchannel.h delete mode 100644 drivers/visorbus/vbuschannel.h delete mode 100644 drivers/visorbus/visorbus_main.c delete mode 100644 drivers/visorbus/visorbus_private.h delete mode 100644 drivers/visorbus/visorchannel.c delete mode 100644 drivers/visorbus/visorchipset.c diff --git a/MAINTAINERS b/MAINTAINERS index 3ed62dcd144e..a62da6d0f943 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20183,14 +20183,6 @@ F: drivers/cdrom/cdrom.c F: include/linux/cdrom.h F: include/uapi/linux/cdrom.h -UNISYS S-PAR DRIVERS -M: David Kershner -L: sparmaintainer@unisys.com (Unisys internal) -S: Supported -F: drivers/staging/unisys/ -F: drivers/visorbus/ -F: include/linux/visorbus.h - UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER R: Alim Akhtar R: Avri Altman diff --git a/drivers/Kconfig b/drivers/Kconfig index 8d6cd5d08722..0cbbe2c58648 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -225,8 +225,6 @@ source "drivers/mux/Kconfig" source "drivers/opp/Kconfig" -source "drivers/visorbus/Kconfig" - source "drivers/siox/Kconfig" source "drivers/slimbus/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 020780b6b4d2..e40942c0b445 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -181,7 +181,6 @@ obj-$(CONFIG_FPGA) += fpga/ obj-$(CONFIG_FSI) += fsi/ obj-$(CONFIG_TEE) += tee/ obj-$(CONFIG_MULTIPLEXER) += mux/ -obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/ obj-$(CONFIG_SIOX) += siox/ obj-$(CONFIG_GNSS) += gnss/ obj-$(CONFIG_INTERCONNECT) += interconnect/ diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index fc274737053d..a4d9f39dde90 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -64,8 +64,6 @@ source "drivers/staging/gdm724x/Kconfig" source "drivers/staging/fwserial/Kconfig" -source "drivers/staging/unisys/Kconfig" - source "drivers/staging/clocking-wizard/Kconfig" source "drivers/staging/fbtft/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 65e317922e3f..a17a2aeaceba 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_MFD_NVEC) += nvec/ obj-$(CONFIG_STAGING_BOARD) += board/ obj-$(CONFIG_LTE_GDM724X) += gdm724x/ obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/ -obj-$(CONFIG_UNISYSSPAR) += unisys/ obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/ obj-$(CONFIG_FB_TFT) += fbtft/ obj-$(CONFIG_MOST) += most/ diff --git a/drivers/staging/unisys/Documentation/ABI/sysfs-platform-visorchipset b/drivers/staging/unisys/Documentation/ABI/sysfs-platform-visorchipset deleted file mode 100644 index c2359de17eaf..000000000000 --- a/drivers/staging/unisys/Documentation/ABI/sysfs-platform-visorchipset +++ /dev/null @@ -1,89 +0,0 @@ -This file describes sysfs entries beneath /devices/platform/visorchipset. - -What: install/error -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: used to send the ID of a string that should be displayed on - s-Par's automatic installation progress screen when an error - is encountered during installation. This field has no effect - if not in installation mode. -Users: sparmaintainer@unisys.com - -What: install/remainingsteps -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: used to set the value of the progress bar on the s-Par automatic - installation progress screen. This field has no effect if not in - installation mode. -Users: sparmaintainer@unisys.com - -What: install/textid -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: used to send the ID of a string that should be displayed on - s-Par's automatic installation progress screen. Setting this - field when not in installation mode (boottotool was set on - the previous guest boot) has no effect. -Users: sparmaintainer@unisys.com - -What: install/boottotool -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: The boottotool flag controls s-Par behavior on the next boot of - this guest. Setting the flag will cause the guest to boot from - the utility and installation image, which will use the value in - the toolaction field to determine what operation is being - requested. -Users: sparmaintainer@unisys.com - -What: install/toolaction -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: This field is used to tell s-Par which type of recovery tool - action to perform on the next guest boot-up. The meaning of the - value is dependent on the type of installation software used to - commission the guest. -Users: sparmaintainer@unisys.com - -What: parahotplug/deviceenabled -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: This entry is used by a Unisys support script installed on the - guest, and triggered by a udev event. The support script is - responsible for enabling and disabling SR-IOV devices when the - PF device is being recovered in another guest. - - Some SR-IOV devices have problems when the PF is reset without - first disabling all VFs attached to that PF. s-Par handles this - situation by sending a message to guests using these VFs, and - the script will disable the device. When the PF is recovered, - another message is sent to the guests to re-enable the VFs. - - The parahotplug/deviceenabled interface is used to acknowledge - the recovery message. -Users: sparmaintainer@unisys.com - -What: parahotplug/devicedisabled -Date: 7/18/2014 -KernelVersion: TBD -Contact: sparmaintainer@unisys.com -Description: This entry is used by a Unisys support script installed on the - guest, and triggered by a udev event. The support script is - responsible for enabling and disabling SR-IOV devices when the - PF device is being recovered in another guest. - - Some SR-IOV devices have problems when the PF is reset without - first disabling all VFs attached to that PF. s-Par handles this - situation by sending a message to guests using these VFs, and - the script will disable the device. When the PF is recovered, - another message is sent to the guests to re-enable the VFs. - - The parahotplug/devicedisaabled interface is used to acknowledge - the initial recovery message. -Users: sparmaintainer@unisys.com diff --git a/drivers/staging/unisys/Documentation/overview.txt b/drivers/staging/unisys/Documentation/overview.txt deleted file mode 100644 index cf29f884cbe0..000000000000 --- a/drivers/staging/unisys/Documentation/overview.txt +++ /dev/null @@ -1,337 +0,0 @@ -1. Overview ------------ - -This document describes the driver set for Unisys Secure Partitioning -(s-Par(R)). - -s-Par is firmware that provides hardware partitioning capabilities for -splitting large-scale Intel x86 servers into multiple isolated -partitions. s-Par provides a set of para-virtualized device drivers to -allow guest partitions on the same server to share devices that would -normally be unsharable, specifically: - -* visornic - network interface -* visorhba - scsi disk adapter -* visorinput - keyboard and mouse - -These drivers conform to the standard Linux bus/device model described -within Documentation/driver-api/driver-model/, and utilize a driver named -visorbus to present the virtual busses involved. Drivers in the 'visor*' -driver set are commonly referred to as "guest drivers" or "client drivers". -All drivers except visorbus expose a device of a specific usable class to the -Linux guest environment (e.g., block, network, or input), and are collectively -referred to as "function drivers". - -The back-end for each device is owned and managed by a small, -single-purpose service partition in the s-Par firmware, which communicates -with each guest partition sharing that device through an area of shared memory -called a "channel". In s-Par nomenclature, the back-end is often referred to -as the "service partition", "IO partition" (for virtual network and scsi disk -devices), or "console partition" (for virtual keyboard and mouse devices). - -Each virtual device requires exactly 1 dedicated channel, which the guest -driver and back-end use to communicate. The hypervisor need not intervene -(other than normal interrupt handling) in the interactions that occur across -this channel. - -NOT covered in this document: - -* s-Par also supports sharing physical PCI adapters via SR-IOV, but - because this requires no specific support in the guest partitions, it will - not be discussed in this document. Shared SR-IOV devices should be used - wherever possible for highest performance. - -* Because the s-Par back-end provides a standard EFI framebuffer to each - guest, the already-existing efifb Linux driver is used to provide guest - video access. Thus, the only s-Par-unique support that is necessary to - provide a guest graphics console are for keyboard and mouse (via visorinput). - - -2. Driver Descriptions ----------------------- - -2.1. visorbus -------------- - -2.1.1. Overview ---------------- - -The visorbus driver handles the virtual busses on which all of the virtual -devices reside. It provides a registration function named -visorbus_register_visor_driver() that is called by each of the function -drivers at initialization time, which the function driver uses to tell -visorbus about the device classes (via specifying a list of device type -GUIDs) it wants to handle. For use by function drivers, visorbus provides -implementation for struct visor_driver and struct visor_device, as well -as utility functions for communicating with the back-end. - -visorbus is associated with ACPI id "PNP0A07" in modules.alias, so if built -as a module it will typically be loaded automatically via standard udev or -systemd (God help us) configurations. - -visorbus can similarly force auto-loading of function drivers for virtual -devices it discovers, as it includes a MODALIAS environment variable of this -form in the hotplug uevent environment when each virtual device is -discovered: - - visorbus: - -visorbus notifies each function driver when a device of its registered class -arrives and departs, by calling the function driver's probe() and remove() -methods. - -The actual struct device objects that correspond to each virtual bus and -each virtual device are created and owned by visorbus. These device objects -are created in response to messages from the s-Par back-end received on a -special control channel called the "controlvm channel" (each guest partition -has access to exactly 1 controlvm channel), and have a lifetime that is -independent of the function drivers that control them. - -2.1.2. "struct visor device" Function Driver Interfaces -------------------------------------------------------- - -The interface between visorbus and its function drivers is defined in -visorbus.h, and described below. - -When a visor function driver loads, it calls visorbus_register_visor_driver() -to register itself with visorbus. The significant information passed in this -exchange is as follows: - -* the GUID(s) of the channel type(s) that are handled by this driver, as - well as a "friendly name" identifying each (this will be published under - /sys/devices/visorbus/dev) - -* the addresses of callback functions to be called whenever a virtual - device/channel with the appropriate channel-type GUID(s) appears or - disappears - -* the address of a "channel_interrupt" function, which will be automatically - called at specific intervals to enable the driver to poll the device - channel for activity - -The following functions implemented within each function driver will be -called automatically by the visorbus driver at appropriate times: - -* The probe() function notifies about the creation of each new virtual - device/channel instance. - -* The remove() function notifies about the destruction of a virtual - device/channel instance. - -* The channel_interrupt() function is called at frequent intervals to - give the function driver an opportunity to poll the virtual device channel - for requests. Information is passed to this function to enable the - function driver to use the visorchannel_signalinsert() and - visorchannel_signalremove() functions to respond to and initiate activity - over the channel. (Note that since it is the visorbus driver that - determines when this is called, it is very easy to switch to - interrupt-driven mechanisms when available for particular virtual device - types.) - -* The pause() function is called should it ever be necessary to direct the - function driver to temporarily stop accessing the device channel. An - example of when this is needed is when the service partition implementing - the back-end of the virtual device needs to be recovered. After a - successful return of pause(), the function driver must not access the - device channel until a subsequent resume() occurs. - -* The resume() function is the "book-end" to pause(), and is described above. - -2.1.3. sysfs Advertised Information ------------------------------------ - -Because visorbus is a standard Linux bus driver in the model described in -Documentation/driver-api/driver-model/, the hierarchy of s-Par virtual devices is -published in the sysfs tree beneath /bus/visorbus/, e.g., -/sys/bus/visorbus/devices/ might look like: - - vbus1:dev1 -> ../../../devices/visorbus1/vbus1:dev1 - vbus1:dev2 -> ../../../devices/visorbus1/vbus1:dev2 - vbus1:dev3 -> ../../../devices/visorbus1/vbus1:dev3 - vbus2:dev0 -> ../../../devices/visorbus2/vbus2:dev0 - vbus2:dev1 -> ../../../devices/visorbus2/vbus2:dev1 - vbus2:dev2 -> ../../../devices/visorbus2/vbus2:dev2 - visorbus1 -> ../../../devices/visorbus1 - visorbus2 -> ../../../devices/visorbus2 - -visor_device notes: - -* Each visorbus entry denotes the existence of a struct visor_device - denoting virtual bus #. A unique s-Par channel exists for each such - virtual bus. - -* Virtual bus numbers uniquely identify s-Par back-end service partitions. - In this example, bus 1 corresponds to the s-Par console partition - (controls keyboard, video, and mouse), whereas bus 2 corresponds to the - s-Par IO partition (controls network and disk). - -* Each vbus:dev entry denotes the existence of a struct visor_device - denoting virtual device # outboard of virtual bus #. A unique s-Par - channel exists for each such virtual device. - -* If a function driver has loaded and claimed a particular device, the - bus/visorbus/devices/vbus:dev/driver symlink will indicate that - function driver. - -Every active visorbus device will have a sysfs subtree under: - - /sys/devices/visorbus/vbus:dev/ - -The following files exist under /sys/devices/visorbus/vbus:dev: - - subsystem link to sysfs tree that describes the - visorbus bus type; e.g.: - ../../../bus/visorbus - - driver link to sysfs tree that describes the - function driver controlling this device; - e.g.: - ../../../bus/visorbus/drivers/visorhba - Note that this "driver" link will not exist - if the appropriate function driver has not - been loaded yet. - - channel properties of the device channel (all in - ascii text format) - - clientpartition handle identifying the guest (client) side - of this channel, e.g. 0x10000000. - - nbytes total size of this channel in bytes - - physaddr the guest physical address for the base of - the channel - - typeguid a GUID identifying the channel type, in - xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx notation - - typename a "friendly name" for this channel type, e.g., - "keyboard". Note that this name is provided by - a particular function driver, so "typename" - will return an empty string until AFTER the - appropriate function driver controlling this - channel type is loaded - - zoneguid a GUID identifying the channel zone, in - xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx notation - - -2.2. visorhba -------------- - -The visorhba driver registers with visorbus as the function driver to -handle virtual scsi disk devices, specified using the -VISOR_VHBA_CHANNEL_GUID type in the visorbus_register_visor_driver() -call. visorhba uses scsi_add_host() to expose a Linux block device -(e.g., /sys/block/) in the guest environment for each s-Par virtual device. - -visorhba provides access to a shared SCSI host bus adapter and one or more -disk devices, by proxying SCSI commands between the guest and the service -partition that owns the shared SCSI adapter, using a channel between the -guest and the service partition. The disks that appear on the shared bus -are defined by the s-Par configuration and enforced by the service partition, -while the guest driver handles sending commands and handling responses. Each -disk is shared as a whole to a guest. Sharing the bus adapter in this way -provides resiliency; should the device encounter an error, only the service -partition is rebooted, and the device is reinitialized. This allows -guests to continue running and to recover from the error. - -When compiled as a module, visorhba can be autoloaded by visorbus in -standard udev/systemd environments, as it includes the modules.alias -definition: - - "visorbus:"+VISOR_VHBA_CHANNEL_GUID_STR - -i.e.: - - alias visorbus:414815ed-c58c-11da-95a9-00e08161165f visorhba - - -2.3. visornic -------------- - -The visornic driver registers with visorbus as the function driver to -handle virtual network devices, specified using the -VISOR_VNIC_CHANNEL_GUID type in the visorbus_register_visor_driver() -call. visornic uses register_netdev() to expose a Linux device of class net -(e.g., /sys/class/net/) in the guest environment for each s-Par virtual -device. - -visornic provides a paravirtualized network interface to a -guest by proxying buffer information between the guest and the service -partition that owns the shared network interface, using a channel -between the guest and the service partition. The connectivity of this -interface with the shared interface and possibly other guest -partitions is defined by the s-Par configuration and enforced by the -service partition; the guest driver handles communication and link -status. - -When compiled as a module, visornic can be autoloaded by visorbus in -standard udev/systemd environments, as it includes the modules.alias -definition: - - "visorbus:"+VISOR_VNIC_CHANNEL_GUID_STR - -i.e.: - - alias visorbus:8cd5994d-c58e-11da-95a9-00e08161165f visornic - - -2.4. visorinput ---------------- - -The visorinput driver registers with visorbus as the function driver to -handle human input devices, specified using the -VISOR_KEYBOARD_CHANNEL_GUID and VISOR_MOUSE_CHANNEL_GUID -types in the visorbus_register_visor_driver() call. visorinput uses -input_register_device() to expose devices of class input -(e.g., /sys/class/input/) for virtual keyboard and virtual mouse devices. -A s-Par virtual keyboard device maps 1-to-1 with a Linux input device -named "visor Keyboard", while a s-Par virtual mouse device has 2 Linux input -devices created for it: 1 named "visor Wheel", and 1 named "visor Mouse". - -By registering as input class devices, modern versions of X will -automatically find and properly use s-Par virtual keyboard and mouse devices. -As the s-Par back-end reports keyboard and mouse activity via events on the -virtual device channel, the visorinput driver delivers the activity to the -Linux environment by calling input_report_key() and input_report_abs(). - -You can interact with the guest console using the usyscon Partition Desktop -(a.k.a., "pd") application, provided as part of s-Par. After installing the -usyscon Partition Desktop into a Linux environment via the -usyscon_partitiondesktop-*.rpm, or into a Windows environment via -PartitionDesktop.msi, you will be able to launch a console for your guest -Linux environment by clicking the console icon in the s-Par web UI. - -When compiled as a module, visorinput can be autoloaded by visorbus in -standard udev/systemd environments, as it includes the modules.alias -definition: - - "visorbus:"+VISOR_MOUSE_CHANNEL_GUID_STR - "visorbus:"+VISOR_KEYBOARD_CHANNEL_GUID_STR - -i.e.: - - alias visorbus:c73416d0-b0b8-44af-b304-9d2ae99f1b3d visorinput - alias visorbus:addf07d4-94a9-46e2-81c3-61abcdbdbd87 visorinput - - -3. Minimum Required Driver Set ------------------------------- - -visorbus is required for every Linux guest running under s-Par. - -visorhba is typically required for a Linux guest running under s-Par, as it -is required if your guest boot disk is a virtual device provided by the s-Par -back-end, which is the default configuration. However, for advanced -configurations where the Linux guest boots via an SR-IOV-provided HBA or -SAN disk for example, visorhba is not technically required. - -visornic is typically required for a Linux guest running under s-Par, as it -is required if your guest network interface is a virtual device provided by -the s-Par back-end, which is the default configuration. However, for -configurations where the Linux guest is provided with an SR-IOV NIC -for example, visornic is not technically required. - -visorinput is only required for a Linux guest running under s-Par if you -require graphics-mode access to your guest console. diff --git a/drivers/staging/unisys/Kconfig b/drivers/staging/unisys/Kconfig deleted file mode 100644 index 43fe1ce538e1..000000000000 --- a/drivers/staging/unisys/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Unisys SPAR driver configuration -# -menuconfig UNISYSSPAR - bool "Unisys SPAR driver support" - help - Support for the Unisys SPAR drivers - -if UNISYSSPAR - -source "drivers/staging/unisys/visornic/Kconfig" -source "drivers/staging/unisys/visorinput/Kconfig" -source "drivers/staging/unisys/visorhba/Kconfig" - -endif # UNISYSSPAR diff --git a/drivers/staging/unisys/MAINTAINERS b/drivers/staging/unisys/MAINTAINERS deleted file mode 100644 index aaddc619c329..000000000000 --- a/drivers/staging/unisys/MAINTAINERS +++ /dev/null @@ -1,5 +0,0 @@ -Unisys s-Par drivers -M: David Kershner -S: Maintained -F: drivers/staging/unisys/Documentation/overview.txt -F: drivers/staging/unisys/ diff --git a/drivers/staging/unisys/Makefile b/drivers/staging/unisys/Makefile deleted file mode 100644 index c0f76cc196a6..000000000000 --- a/drivers/staging/unisys/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Unisys SPAR drivers -# -obj-$(CONFIG_UNISYS_VISORNIC) += visornic/ -obj-$(CONFIG_UNISYS_VISORINPUT) += visorinput/ -obj-$(CONFIG_UNISYS_VISORHBA) += visorhba/ diff --git a/drivers/staging/unisys/TODO b/drivers/staging/unisys/TODO deleted file mode 100644 index d863f266bf76..000000000000 --- a/drivers/staging/unisys/TODO +++ /dev/null @@ -1,16 +0,0 @@ -TODO: - - enhance visornic to use channel_interrupt() hook instead of a - kernel thread - - enhance visorhba to use channel_interrupt() hook instead of a - kernel thread - - teach visorbus to handle virtual interrupts triggered by s-Par - back-end, and call function driver's channel_interrupt() function - when they occur - - enhance debugfs interfaces (e.g., per device, etc.) - - upgrade/remove deprecated workqueue operations - - move individual drivers into proper driver subsystems - -Patches to: - Greg Kroah-Hartman - Ken Cox - Unisys s-Par maintainer mailing list diff --git a/drivers/staging/unisys/include/iochannel.h b/drivers/staging/unisys/include/iochannel.h deleted file mode 100644 index 9ef812c0bc42..000000000000 --- a/drivers/staging/unisys/include/iochannel.h +++ /dev/null @@ -1,571 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010 - 2016 UNISYS CORPORATION - * All rights reserved. - */ - -#ifndef __IOCHANNEL_H__ -#define __IOCHANNEL_H__ - -/* - * Everything needed for IOPart-GuestPart communication is define in - * this file. Note: Everything is OS-independent because this file is - * used by Windows, Linux and possible EFI drivers. - * - * Communication flow between the IOPart and GuestPart uses the channel headers - * channel state. The following states are currently being used: - * UNINIT(All Zeroes), CHANNEL_ATTACHING, CHANNEL_ATTACHED, CHANNEL_OPENED - * - * Additional states will be used later. No locking is needed to switch between - * states due to the following rules: - * - * 1. IOPart is only the only partition allowed to change from UNIT - * 2. IOPart is only the only partition allowed to change from - * CHANNEL_ATTACHING - * 3. GuestPart is only the only partition allowed to change from - * CHANNEL_ATTACHED - * - * The state changes are the following: IOPart sees the channel is in UNINIT, - * UNINIT -> CHANNEL_ATTACHING (performed only by IOPart) - * CHANNEL_ATTACHING -> CHANNEL_ATTACHED (performed only by IOPart) - * CHANNEL_ATTACHED -> CHANNEL_OPENED (performed only by GuestPart) - */ - -#include -#include -#include - -/* - * Must increment these whenever you insert or delete fields within this channel - * struct. Also increment whenever you change the meaning of fields within this - * channel struct so as to break pre-existing software. Note that you can - * usually add fields to the END of the channel struct without needing to - * increment this. - */ -#define VISOR_VHBA_CHANNEL_VERSIONID 2 -#define VISOR_VNIC_CHANNEL_VERSIONID 2 - -/* - * Everything necessary to handle SCSI & NIC traffic between Guest Partition and - * IO Partition is defined below. - */ - -/* - * Define the two queues per data channel between iopart and ioguestparts. - * IOCHAN_TO_IOPART -- used by guest to 'insert' signals to iopart. - * IOCHAN_FROM_IOPART -- used by guest to 'remove' signals from IO part. - */ -#define IOCHAN_TO_IOPART 0 -#define IOCHAN_FROM_IOPART 1 - -/* Size of cdb - i.e., SCSI cmnd */ -#define MAX_CMND_SIZE 16 - -/* Unisys-specific DMA direction values */ -enum uis_dma_data_direction { - UIS_DMA_BIDIRECTIONAL = 0, - UIS_DMA_TO_DEVICE = 1, - UIS_DMA_FROM_DEVICE = 2, - UIS_DMA_NONE = 3 -}; - -#define MAX_SENSE_SIZE 64 -#define MAX_PHYS_INFO 64 - -/* - * enum net_types - Various types of network packets that can be sent in cmdrsp. - * @NET_RCV_POST: Submit buffer to hold receiving incoming packet. - * @NET_RCV: visornic -> uisnic. Incoming packet received. - * @NET_XMIT: uisnic -> visornic. For outgoing packet. - * @NET_XMIT_DONE: visornic -> uisnic. Outgoing packet xmitted. - * @NET_RCV_ENBDIS: uisnic -> visornic. Enable/Disable packet reception. - * @NET_RCV_ENBDIS_ACK: visornic -> uisnic. Acknowledge enable/disable packet. - * @NET_RCV_PROMISC: uisnic -> visornic. Enable/Disable promiscuous mode. - * @NET_CONNECT_STATUS: visornic -> uisnic. Indicate the loss or restoration of - * a network connection. - * @NET_MACADDR: uisnic -> visornic. Indicates the client has requested - * to update it's MAC address. - * @NET_MACADDR_ACK: MAC address acknowledge. - */ -enum net_types { - NET_RCV_POST = 0, - NET_RCV, - NET_XMIT, - NET_XMIT_DONE, - NET_RCV_ENBDIS, - NET_RCV_ENBDIS_ACK, - /* Reception */ - NET_RCV_PROMISC, - NET_CONNECT_STATUS, - NET_MACADDR, - NET_MACADDR_ACK, -}; - -/* Minimum eth data size */ -#define ETH_MIN_DATA_SIZE 46 -#define ETH_MIN_PACKET_SIZE (ETH_HLEN + ETH_MIN_DATA_SIZE) - -/* Maximum data size */ -#define VISOR_ETH_MAX_MTU 16384 - -#ifndef MAX_MACADDR_LEN -/* Number of bytes in MAC address */ -#define MAX_MACADDR_LEN 6 -#endif - -/* Various types of scsi task mgmt commands. */ -enum task_mgmt_types { - TASK_MGMT_ABORT_TASK = 1, - TASK_MGMT_BUS_RESET, - TASK_MGMT_LUN_RESET, - TASK_MGMT_TARGET_RESET, -}; - -/* Various types of vdisk mgmt commands. */ -enum vdisk_mgmt_types { - VDISK_MGMT_ACQUIRE = 1, - VDISK_MGMT_RELEASE, -}; - -struct phys_info { - u64 pi_pfn; - u16 pi_off; - u16 pi_len; -} __packed; - -#define MIN_NUMSIGNALS 64 - -/* Structs with pragma pack. */ - -struct guest_phys_info { - u64 address; - u64 length; -} __packed; - -/* - * struct uisscsi_dest - * @channel: Bus number. - * @id: Target number. - * @lun: Logical unit number. - */ -struct uisscsi_dest { - u32 channel; - u32 id; - u32 lun; -} __packed; - -struct vhba_wwnn { - u32 wwnn1; - u32 wwnn2; -} __packed; - -/* - * struct vhba_config_max - * @max_channel: Maximum channel for devices attached to this bus. - * @max_id: Maximum SCSI ID for devices attached to bus. - * @max_lun: Maximum SCSI LUN for devices attached to bus. - * @cmd_per_lun: Maximum number of outstanding commands per LUN. - * @max_io_size: Maximum io size for devices attached to this bus. Max io size - * is often determined by the resource of the hba. - * e.g Max scatter gather list length * page size / sector size. - * - * WARNING: Values stored in this structure must contain maximum counts (not - * maximum values). - * - * 20 bytes - */ -struct vhba_config_max { - u32 max_channel; - u32 max_id; - u32 max_lun; - u32 cmd_per_lun; - u32 max_io_size; -} __packed; - -/* - * struct uiscmdrsp_scsi - * - * @handle: The handle to the cmd that was received. Send it back as - * is in the rsp packet. - * @cmnd: The cdb for the command. - * @bufflen: Length of data to be transferred out or in. - * @guest_phys_entries: Number of entries in scatter-gather list. - * @struct gpi_list: Physical address information for each fragment. - * @data_dir: Direction of the data, if any. - * @struct vdest: Identifies the virtual hba, id, channel, lun to which - * cmd was sent. - * @linuxstat: Original Linux status used by Linux vdisk. - * @scsistat: The scsi status. - * @addlstat: Non-scsi status. - * @sensebuf: Sense info in case cmd failed. sensebuf holds the - * sense_data struct. See sense_data struct for more - * details. - * @*vdisk: Pointer to the vdisk to clean up when IO completes. - * @no_disk_result: Used to return no disk inquiry result when - * no_disk_result is set to 1 - * scsi.scsistat is SAM_STAT_GOOD - * scsi.addlstat is 0 - * scsi.linuxstat is SAM_STAT_GOOD - * That is, there is NO error. - */ -struct uiscmdrsp_scsi { - u64 handle; - u8 cmnd[MAX_CMND_SIZE]; - u32 bufflen; - u16 guest_phys_entries; - struct guest_phys_info gpi_list[MAX_PHYS_INFO]; - u32 data_dir; - struct uisscsi_dest vdest; - /* Needed to queue the rsp back to cmd originator. */ - int linuxstat; - u8 scsistat; - u8 addlstat; -#define ADDL_SEL_TIMEOUT 4 - /* The following fields are need to determine the result of command. */ - u8 sensebuf[MAX_SENSE_SIZE]; - void *vdisk; - int no_disk_result; -} __packed; - -/* - * Defines to support sending correct inquiry result when no disk is - * configured. - * - * From SCSI SPC2 - - * - * If the target is not capable of supporting a device on this logical unit, the - * device server shall set this field to 7Fh (PERIPHERAL QUALIFIER set to 011b - * and PERIPHERAL DEVICE TYPE set to 1Fh). - * - * The device server is capable of supporting the specified peripheral device - * type on this logical unit. However, the physical device is not currently - * connected to this logical unit. - */ - -/* - * Peripheral qualifier of 0x3 - * Peripheral type of 0x1f - * Specifies no device but target present - */ -#define DEV_NOT_CAPABLE 0x7f -/* - * Peripheral qualifier of 0x1 - * Peripheral type of 0 - disk - * Specifies device capable, but not present - */ -#define DEV_DISK_CAPABLE_NOT_PRESENT 0x20 -/* HiSup = 1; shows support for report luns must be returned for lun 0. */ -#define DEV_HISUPPORT 0x10 - -/* - * Peripheral qualifier of 0x3 - * Peripheral type of 0x1f - * Specifies no device but target present - */ -#define DEV_NOT_CAPABLE 0x7f -/* - * Peripheral qualifier of 0x1 - * Peripheral type of 0 - disk - * Specifies device capable, but not present - */ -#define DEV_DISK_CAPABLE_NOT_PRESENT 0x20 -/* HiSup = 1; shows support for report luns must be returned for lun 0. */ -#define DEV_HISUPPORT 0x10 - -/* - * NOTE: Linux code assumes inquiry contains 36 bytes. Without checking length - * in buf[4] some Linux code accesses bytes beyond 5 to retrieve vendor, product - * and revision. Yikes! So let us always send back 36 bytes, the minimum for - * inquiry result. - */ -#define NO_DISK_INQUIRY_RESULT_LEN 36 -/* 5 bytes minimum for inquiry result */ -#define MIN_INQUIRY_RESULT_LEN 5 - -/* SCSI device version for no disk inquiry result */ -/* indicates SCSI SPC2 (SPC3 is 5) */ -#define SCSI_SPC2_VER 4 - -/* Struct and Defines to support sense information. */ - -/* - * The following struct is returned in sensebuf field in uiscmdrsp_scsi. It is - * initialized in exactly the manner that is recommended in Windows (hence the - * odd values). - * When set, these fields will have the following values: - * ErrorCode = 0x70 indicates current error - * Valid = 1 indicates sense info is valid - * SenseKey contains sense key as defined by SCSI specs. - * AdditionalSenseCode contains sense key as defined by SCSI specs. - * AdditionalSenseCodeQualifier contains qualifier to sense code as defined by - * scsi docs. - * AdditionalSenseLength contains will be sizeof(sense_data)-8=10. - */ -struct sense_data { - u8 errorcode:7; - u8 valid:1; - u8 segment_number; - u8 sense_key:4; - u8 reserved:1; - u8 incorrect_length:1; - u8 end_of_media:1; - u8 file_mark:1; - u8 information[4]; - u8 additional_sense_length; - u8 command_specific_information[4]; - u8 additional_sense_code; - u8 additional_sense_code_qualifier; - u8 fru_code; - u8 sense_key_specific[3]; -} __packed; - -/* - * struct net_pkt_xmt - * @len: Full length of data in the packet. - * @num_frags: Number of fragments in frags containing data. - * @struct phys_info frags: Physical page information. - * @ethhdr: The ethernet header. - * @struct lincsum: These are needed for csum at uisnic end. - * @valid: 1 = struct is valid - else ignore. - * @hrawoffv: 1 = hwrafoff is valid. - * @nhrawoffv: 1 = nhwrafoff is valid. - * @protocol: Specifies packet protocol. - * @csum: Value used to set skb->csum at IOPart. - * @hrawoff: Value used to set skb->h.raw at IOPart. hrawoff points to - * the start of the TRANSPORT LAYER HEADER. - * @nhrawoff: Value used to set skb->nh.raw at IOPart. nhrawoff points to - * the start of the NETWORK LAYER HEADER. - * - * NOTE: - * The full packet is described in frags but the ethernet header is separately - * kept in ethhdr so that uisnic doesn't have "MAP" the guest memory to get to - * the header. uisnic needs ethhdr to determine how to route the packet. - */ -struct net_pkt_xmt { - int len; - int num_frags; - struct phys_info frags[MAX_PHYS_INFO]; - char ethhdr[ETH_HLEN]; - struct { - u8 valid; - u8 hrawoffv; - u8 nhrawoffv; - __be16 protocol; - __wsum csum; - u32 hrawoff; - u32 nhrawoff; - } lincsum; -} __packed; - -struct net_pkt_xmtdone { - /* Result of NET_XMIT */ - u32 xmt_done_result; -} __packed; - -/* - * RCVPOST_BUF_SIZE must be at most page_size(4096) - cache_line_size (64) The - * reason is because dev_skb_alloc which is used to generate RCV_POST skbs in - * visornic requires that there is "overhead" in the buffer, and pads 16 bytes. - * Use 1 full cache line size for "overhead" so that transfers are optimized. - * IOVM requires that a buffer be represented by 1 phys_info structure - * which can only cover page_size. - */ -#define RCVPOST_BUF_SIZE 4032 -#define MAX_NET_RCV_CHAIN \ - ((VISOR_ETH_MAX_MTU + ETH_HLEN + RCVPOST_BUF_SIZE - 1) \ - / RCVPOST_BUF_SIZE) - -/* rcv buf size must be large enough to include ethernet data len + ethernet - * header len - we are choosing 2K because it is guaranteed to be describable. - */ -struct net_pkt_rcvpost { - /* Physical page information for the single fragment 2K rcv buf */ - struct phys_info frag; - /* - * Ensures that receive posts are returned to the adapter which we sent - * them from originally. - */ - u64 unique_num; - -} __packed; - -/* - * struct net_pkt_rcv - * @rcv_done_len: Length of the received data. - * @numrcvbufs: Contains the incoming data. Guest side MUST chain these - * together. - * @*rcvbuf: List of chained rcvbufa. Each entry is a receive buffer - * provided by NET_RCV_POST. NOTE: First rcvbuf in the - * chain will also be provided in net.buf. - * @unique_num: - * @rcvs_dropped_delta: - * - * The number of rcvbuf that can be chained is based on max mtu and size of each - * rcvbuf. - */ -struct net_pkt_rcv { - u32 rcv_done_len; - u8 numrcvbufs; - void *rcvbuf[MAX_NET_RCV_CHAIN]; - u64 unique_num; - u32 rcvs_dropped_delta; -} __packed; - -struct net_pkt_enbdis { - void *context; - /* 1 = enable, 0 = disable */ - u16 enable; -} __packed; - -struct net_pkt_macaddr { - void *context; - /* 6 bytes */ - u8 macaddr[MAX_MACADDR_LEN]; -} __packed; - -/* - * struct uiscmdrsp_net - cmd rsp packet used for VNIC network traffic. - * @enum type: - * @*buf: - * @union: - * @struct xmt: Used for NET_XMIT. - * @struct xmtdone: Used for NET_XMIT_DONE. - * @struct rcvpost: Used for NET_RCV_POST. - * @struct rcv: Used for NET_RCV. - * @struct enbdis: Used for NET_RCV_ENBDIS, NET_RCV_ENBDIS_ACK, - * NET_RCV_PROMSIC, and NET_CONNECT_STATUS. - * @struct macaddr: - */ -struct uiscmdrsp_net { - enum net_types type; - void *buf; - union { - struct net_pkt_xmt xmt; - struct net_pkt_xmtdone xmtdone; - struct net_pkt_rcvpost rcvpost; - struct net_pkt_rcv rcv; - struct net_pkt_enbdis enbdis; - struct net_pkt_macaddr macaddr; - }; -} __packed; - -/* - * struct uiscmdrsp_scsitaskmgmt - * @enum tasktype: The type of task. - * @struct vdest: The vdisk for which this task mgmt is generated. - * @handle: This is a handle that the guest has saved off for its - * own use. The handle value is preserved by iopart and - * returned as in task mgmt rsp. - * @notify_handle: For Linux guests, this is a pointer to wait_queue_head - * that a thread is waiting on to see if the taskmgmt - * command has completed. When the rsp is received by - * guest, the thread receiving the response uses this to - * notify the thread waiting for taskmgmt command - * completion. It's value is preserved by iopart and - * returned as in the task mgmt rsp. - * @notifyresult_handle: This is a handle to the location in the guest where - * the result of the taskmgmt command (result field) is - * saved to when the response is handled. It's value is - * preserved by iopart and returned as is in the task mgmt - * rsp. - * @result: Result of taskmgmt command - set by IOPart. - */ -struct uiscmdrsp_scsitaskmgmt { - enum task_mgmt_types tasktype; - struct uisscsi_dest vdest; - u64 handle; - u64 notify_handle; - u64 notifyresult_handle; - char result; - -#define TASK_MGMT_FAILED 0 -} __packed; - -/* - * struct uiscmdrsp_disknotify - Used by uissd to send disk add/remove - * notifications to Guest. - * @add: 0-remove, 1-add. - * @*v_hba: Channel info to route msg. - * @channel: SCSI Path of Disk to added or removed. - * @id: SCSI Path of Disk to added or removed. - * @lun: SCSI Path of Disk to added or removed. - * - * Note that the vHba pointer is not used by the Client/Guest side. - */ -struct uiscmdrsp_disknotify { - u8 add; - void *v_hba; - u32 channel, id, lun; -} __packed; - -/* Keeping cmd and rsp info in one structure for now cmd rsp packet for SCSI */ -struct uiscmdrsp { - char cmdtype; - /* Describes what type of information is in the struct */ -#define CMD_SCSI_TYPE 1 -#define CMD_NET_TYPE 2 -#define CMD_SCSITASKMGMT_TYPE 3 -#define CMD_NOTIFYGUEST_TYPE 4 - union { - struct uiscmdrsp_scsi scsi; - struct uiscmdrsp_net net; - struct uiscmdrsp_scsitaskmgmt scsitaskmgmt; - struct uiscmdrsp_disknotify disknotify; - }; - /* Send the response when the cmd is done (scsi and scsittaskmgmt). */ - void *private_data; - /* General Purpose Queue Link */ - struct uiscmdrsp *next; - /* Pointer to the nextactive commands */ - struct uiscmdrsp *activeQ_next; - /* Pointer to the prevactive commands */ - struct uiscmdrsp *activeQ_prev; -} __packed; - -/* total = 28 bytes */ -struct iochannel_vhba { - /* 8 bytes */ - struct vhba_wwnn wwnn; - /* 20 bytes */ - struct vhba_config_max max; -} __packed; - -struct iochannel_vnic { - /* 6 bytes */ - u8 macaddr[6]; - /* 4 bytes */ - u32 num_rcv_bufs; - /* 4 bytes */ - u32 mtu; - /* 16 bytes */ - guid_t zone_guid; -} __packed; - -/* - * This is just the header of the IO channel. It is assumed that directly after - * this header there is a large region of memory which contains the command and - * response queues as specified in cmd_q and rsp_q SIGNAL_QUEUE_HEADERS. - */ -struct visor_io_channel { - struct channel_header channel_header; - struct signal_queue_header cmd_q; - struct signal_queue_header rsp_q; - union { - struct iochannel_vhba vhba; - struct iochannel_vnic vnic; - } __packed; - -#define MAX_CLIENTSTRING_LEN 1024 - /* client_string is NULL termimated so holds max-1 bytes */ - u8 client_string[MAX_CLIENTSTRING_LEN]; -} __packed; - -/* INLINE functions for initializing and accessing I/O data channels. */ -#define SIZEOF_CMDRSP (64 * DIV_ROUND_UP(sizeof(struct uiscmdrsp), 64)) - -/* Use 4K page sizes when passing page info between Guest and IOPartition. */ -#define PI_PAGE_SIZE 0x1000 -#define PI_PAGE_MASK 0x0FFF - -/* __IOCHANNEL_H__ */ -#endif diff --git a/drivers/staging/unisys/visorhba/Kconfig b/drivers/staging/unisys/visorhba/Kconfig deleted file mode 100644 index ed59ac11c322..000000000000 --- a/drivers/staging/unisys/visorhba/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Unisys visorhba configuration -# - -config UNISYS_VISORHBA - tristate "Unisys visorhba driver" - depends on UNISYSSPAR && UNISYS_VISORBUS && SCSI - help - The Unisys visorhba driver provides support for s-Par HBA - devices exposed on the s-Par visorbus. When a message is sent - to visorbus to create a HBA device, the probe function of - visorhba is called to create the scsi device. - If you say Y here, you will enable the Unisys visorhba driver. - diff --git a/drivers/staging/unisys/visorhba/Makefile b/drivers/staging/unisys/visorhba/Makefile deleted file mode 100644 index b613a7dcdae9..000000000000 --- a/drivers/staging/unisys/visorhba/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Unisys channel -# - -obj-$(CONFIG_UNISYS_VISORHBA) += visorhba.o - -visorhba-y := visorhba_main.o - -ccflags-y += -I $(srctree)/$(src)/../include diff --git a/drivers/staging/unisys/visorhba/visorhba_main.c b/drivers/staging/unisys/visorhba/visorhba_main.c deleted file mode 100644 index 48aa18f8b984..000000000000 --- a/drivers/staging/unisys/visorhba/visorhba_main.c +++ /dev/null @@ -1,1142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2012 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "iochannel.h" - -/* The Send and Receive Buffers of the IO Queue may both be full */ - -#define IOS_ERROR_THRESHOLD 1000 -#define MAX_PENDING_REQUESTS (MIN_NUMSIGNALS * 2) -#define VISORHBA_ERROR_COUNT 30 - -static struct dentry *visorhba_debugfs_dir; - -/* GUIDS for HBA channel type supported by this driver */ -static struct visor_channeltype_descriptor visorhba_channel_types[] = { - /* Note that the only channel type we expect to be reported by the - * bus driver is the VISOR_VHBA channel. - */ - { VISOR_VHBA_CHANNEL_GUID, "sparvhba", sizeof(struct channel_header), - VISOR_VHBA_CHANNEL_VERSIONID }, - {} -}; - -MODULE_DEVICE_TABLE(visorbus, visorhba_channel_types); -MODULE_ALIAS("visorbus:" VISOR_VHBA_CHANNEL_GUID_STR); - -struct visordisk_info { - struct scsi_device *sdev; - u32 valid; - atomic_t ios_threshold; - atomic_t error_count; - struct visordisk_info *next; -}; - -struct scsipending { - struct uiscmdrsp cmdrsp; - /* The Data being tracked */ - void *sent; - /* Type of pointer that is being stored */ - char cmdtype; -}; - -/* Each scsi_host has a host_data area that contains this struct. */ -struct visorhba_devdata { - struct Scsi_Host *scsihost; - struct visor_device *dev; - struct list_head dev_info_list; - /* Tracks the requests that have been forwarded to - * the IOVM and haven't returned yet - */ - struct scsipending pending[MAX_PENDING_REQUESTS]; - /* Start search for next pending free slot here */ - unsigned int nextinsert; - /* lock to protect data in devdata */ - spinlock_t privlock; - bool serverdown; - bool serverchangingstate; - unsigned long long acquire_failed_cnt; - unsigned long long interrupts_rcvd; - unsigned long long interrupts_notme; - unsigned long long interrupts_disabled; - u64 __iomem *flags_addr; - struct visordisk_info head; - unsigned int max_buff_len; - int devnum; - struct uiscmdrsp *cmdrsp; - /* - * allows us to pass int handles back-and-forth between us and - * iovm, instead of raw pointers - */ - struct xarray xa; - struct dentry *debugfs_dir; - struct dentry *debugfs_info; -}; - -struct visorhba_devices_open { - struct visorhba_devdata *devdata; -}; - -/* - * add_scsipending_entry - Save off io command that is pending in - * Service Partition - * @devdata: Pointer to devdata - * @cmdtype: Specifies the type of command pending - * @new: The command to be saved - * - * Saves off the io command that is being handled by the Service - * Partition so that it can be handled when it completes. If new is - * NULL it is assumed the entry refers only to the cmdrsp. - * - * Return: Insert_location where entry was added on success, - * -EBUSY if it can't - */ -static int add_scsipending_entry(struct visorhba_devdata *devdata, - char cmdtype, void *new) -{ - unsigned long flags; - struct scsipending *entry; - int insert_location; - - spin_lock_irqsave(&devdata->privlock, flags); - insert_location = devdata->nextinsert; - while (devdata->pending[insert_location].sent) { - insert_location = (insert_location + 1) % MAX_PENDING_REQUESTS; - if (insert_location == (int)devdata->nextinsert) { - spin_unlock_irqrestore(&devdata->privlock, flags); - return -EBUSY; - } - } - - entry = &devdata->pending[insert_location]; - memset(&entry->cmdrsp, 0, sizeof(entry->cmdrsp)); - entry->cmdtype = cmdtype; - if (new) - entry->sent = new; - /* wants to send cmdrsp */ - else - entry->sent = &entry->cmdrsp; - devdata->nextinsert = (insert_location + 1) % MAX_PENDING_REQUESTS; - spin_unlock_irqrestore(&devdata->privlock, flags); - - return insert_location; -} - -/* - * del_scsipending_ent - Removes an entry from the pending array - * @devdata: Device holding the pending array - * @del: Entry to remove - * - * Removes the entry pointed at by del and returns it. - * - * Return: The scsipending entry pointed to on success, NULL on failure - */ -static void *del_scsipending_ent(struct visorhba_devdata *devdata, int del) -{ - unsigned long flags; - void *sent; - - if (del >= MAX_PENDING_REQUESTS) - return NULL; - - spin_lock_irqsave(&devdata->privlock, flags); - sent = devdata->pending[del].sent; - devdata->pending[del].cmdtype = 0; - devdata->pending[del].sent = NULL; - spin_unlock_irqrestore(&devdata->privlock, flags); - - return sent; -} - -/* - * get_scsipending_cmdrsp - Return the cmdrsp stored in a pending entry - * @ddata: Device holding the pending array - * @ent: Entry that stores the cmdrsp - * - * Each scsipending entry has a cmdrsp in it. The cmdrsp is only valid - * if the "sent" field is not NULL. - * - * Return: A pointer to the cmdrsp, NULL on failure - */ -static struct uiscmdrsp *get_scsipending_cmdrsp(struct visorhba_devdata *ddata, - int ent) -{ - if (ddata->pending[ent].sent) - return &ddata->pending[ent].cmdrsp; - - return NULL; -} - -/* - * setup_scsitaskmgmt_handles - Stash the necessary handles so that the - * completion processing logic for a taskmgmt - * cmd will be able to find who to wake up - * and where to stash the result - * @xa: The data object maintaining the pointer<-->int mappings - * @cmdrsp: Response from the IOVM - * @event: The event handle to associate with an id - * @result: The location to place the result of the event handle into - */ -static int setup_scsitaskmgmt_handles(struct xarray *xa, struct uiscmdrsp *cmdrsp, - wait_queue_head_t *event, int *result) -{ - int ret; - u32 id; - - /* specify the event that has to be triggered when this cmd is complete */ - ret = xa_alloc_irq(xa, &id, event, xa_limit_32b, GFP_KERNEL); - if (ret) - return ret; - cmdrsp->scsitaskmgmt.notify_handle = id; - ret = xa_alloc_irq(xa, &id, result, xa_limit_32b, GFP_KERNEL); - if (ret) { - xa_erase_irq(xa, cmdrsp->scsitaskmgmt.notify_handle); - return ret; - } - cmdrsp->scsitaskmgmt.notifyresult_handle = id; - - return 0; -} - -/* - * cleanup_scsitaskmgmt_handles - Forget handles created by - * setup_scsitaskmgmt_handles() - * @xa: The data object maintaining the pointer<-->int mappings - * @cmdrsp: Response from the IOVM - */ -static void cleanup_scsitaskmgmt_handles(struct xarray *xa, - struct uiscmdrsp *cmdrsp) -{ - xa_erase_irq(xa, cmdrsp->scsitaskmgmt.notify_handle); - xa_erase_irq(xa, cmdrsp->scsitaskmgmt.notifyresult_handle); -} - -/* - * forward_taskmgmt_command - Send taskmegmt command to the Service - * Partition - * @tasktype: Type of taskmgmt command - * @scsidev: Scsidev that issued command - * - * Create a cmdrsp packet and send it to the Service Partition - * that will service this request. - * - * Return: Int representing whether command was queued successfully or not - */ -static int forward_taskmgmt_command(enum task_mgmt_types tasktype, - struct scsi_device *scsidev) -{ - struct uiscmdrsp *cmdrsp; - struct visorhba_devdata *devdata = - (struct visorhba_devdata *)scsidev->host->hostdata; - int notifyresult = 0xffff; - wait_queue_head_t notifyevent; - int scsicmd_id; - int ret; - - if (devdata->serverdown || devdata->serverchangingstate) - return FAILED; - - scsicmd_id = add_scsipending_entry(devdata, CMD_SCSITASKMGMT_TYPE, - NULL); - if (scsicmd_id < 0) - return FAILED; - - cmdrsp = get_scsipending_cmdrsp(devdata, scsicmd_id); - - init_waitqueue_head(¬ifyevent); - - /* issue TASK_MGMT_ABORT_TASK */ - cmdrsp->cmdtype = CMD_SCSITASKMGMT_TYPE; - - ret = setup_scsitaskmgmt_handles(&devdata->xa, cmdrsp, - ¬ifyevent, ¬ifyresult); - if (ret) { - dev_dbg(&scsidev->sdev_gendev, - "visorhba: setup_scsitaskmgmt_handles returned %d\n", ret); - return FAILED; - } - - /* save destination */ - cmdrsp->scsitaskmgmt.tasktype = tasktype; - cmdrsp->scsitaskmgmt.vdest.channel = scsidev->channel; - cmdrsp->scsitaskmgmt.vdest.id = scsidev->id; - cmdrsp->scsitaskmgmt.vdest.lun = scsidev->lun; - cmdrsp->scsitaskmgmt.handle = scsicmd_id; - - dev_dbg(&scsidev->sdev_gendev, - "visorhba: initiating type=%d taskmgmt command\n", tasktype); - if (visorchannel_signalinsert(devdata->dev->visorchannel, - IOCHAN_TO_IOPART, - cmdrsp)) - goto err_del_scsipending_ent; - - /* It can take the Service Partition up to 35 seconds to complete - * an IO in some cases, so wait 45 seconds and error out - */ - if (!wait_event_timeout(notifyevent, notifyresult != 0xffff, - msecs_to_jiffies(45000))) - goto err_del_scsipending_ent; - - dev_dbg(&scsidev->sdev_gendev, - "visorhba: taskmgmt type=%d success; result=0x%x\n", - tasktype, notifyresult); - cleanup_scsitaskmgmt_handles(&devdata->xa, cmdrsp); - return SUCCESS; - -err_del_scsipending_ent: - dev_dbg(&scsidev->sdev_gendev, - "visorhba: taskmgmt type=%d not executed\n", tasktype); - del_scsipending_ent(devdata, scsicmd_id); - cleanup_scsitaskmgmt_handles(&devdata->xa, cmdrsp); - return FAILED; -} - -/* - * visorhba_abort_handler - Send TASK_MGMT_ABORT_TASK - * @scsicmd: The scsicmd that needs aborted - * - * Return: SUCCESS if inserted, FAILED otherwise - */ -static int visorhba_abort_handler(struct scsi_cmnd *scsicmd) -{ - /* issue TASK_MGMT_ABORT_TASK */ - struct scsi_device *scsidev; - struct visordisk_info *vdisk; - int rtn; - - scsidev = scsicmd->device; - vdisk = scsidev->hostdata; - if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT) - atomic_inc(&vdisk->error_count); - else - atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD); - rtn = forward_taskmgmt_command(TASK_MGMT_ABORT_TASK, scsidev); - if (rtn == SUCCESS) { - scsicmd->result = DID_ABORT << 16; - scsi_done(scsicmd); - } - return rtn; -} - -/* - * visorhba_device_reset_handler - Send TASK_MGMT_LUN_RESET - * @scsicmd: The scsicmd that needs aborted - * - * Return: SUCCESS if inserted, FAILED otherwise - */ -static int visorhba_device_reset_handler(struct scsi_cmnd *scsicmd) -{ - /* issue TASK_MGMT_LUN_RESET */ - struct scsi_device *scsidev; - struct visordisk_info *vdisk; - int rtn; - - scsidev = scsicmd->device; - vdisk = scsidev->hostdata; - if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT) - atomic_inc(&vdisk->error_count); - else - atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD); - rtn = forward_taskmgmt_command(TASK_MGMT_LUN_RESET, scsidev); - if (rtn == SUCCESS) { - scsicmd->result = DID_RESET << 16; - scsi_done(scsicmd); - } - return rtn; -} - -/* - * visorhba_bus_reset_handler - Send TASK_MGMT_TARGET_RESET for each - * target on the bus - * @scsicmd: The scsicmd that needs aborted - * - * Return: SUCCESS if inserted, FAILED otherwise - */ -static int visorhba_bus_reset_handler(struct scsi_cmnd *scsicmd) -{ - struct scsi_device *scsidev; - struct visordisk_info *vdisk; - int rtn; - - scsidev = scsicmd->device; - shost_for_each_device(scsidev, scsidev->host) { - vdisk = scsidev->hostdata; - if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT) - atomic_inc(&vdisk->error_count); - else - atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD); - } - rtn = forward_taskmgmt_command(TASK_MGMT_BUS_RESET, scsidev); - if (rtn == SUCCESS) { - scsicmd->result = DID_RESET << 16; - scsi_done(scsicmd); - } - return rtn; -} - -/* - * visorhba_host_reset_handler - Not supported - * @scsicmd: The scsicmd that needs to be aborted - * - * Return: Not supported, return SUCCESS - */ -static int visorhba_host_reset_handler(struct scsi_cmnd *scsicmd) -{ - /* issue TASK_MGMT_TARGET_RESET for each target on each bus for host */ - return SUCCESS; -} - -/* - * visorhba_get_info - Get information about SCSI device - * @shp: Scsi host that is requesting information - * - * Return: String with visorhba information - */ -static const char *visorhba_get_info(struct Scsi_Host *shp) -{ - /* Return version string */ - return "visorhba"; -} - -/* - * dma_data_dir_linux_to_spar - convert dma_data_direction value to - * Unisys-specific equivalent - * @d: dma direction value to convert - * - * Returns the Unisys-specific dma direction value corresponding to @d - */ -static u32 dma_data_dir_linux_to_spar(enum dma_data_direction d) -{ - switch (d) { - case DMA_BIDIRECTIONAL: - return UIS_DMA_BIDIRECTIONAL; - case DMA_TO_DEVICE: - return UIS_DMA_TO_DEVICE; - case DMA_FROM_DEVICE: - return UIS_DMA_FROM_DEVICE; - case DMA_NONE: - return UIS_DMA_NONE; - default: - return UIS_DMA_NONE; - } -} - -/* - * visorhba_queue_command_lck - Queues command to the Service Partition - * @scsicmd: Command to be queued - * @vsiorhba_cmnd_done: Done command to call when scsicmd is returned - * - * Queues to scsicmd to the ServicePartition after converting it to a - * uiscmdrsp structure. - * - * Return: 0 if successfully queued to the Service Partition, otherwise - * error code - */ -static int visorhba_queue_command_lck(struct scsi_cmnd *scsicmd) -{ - void (*visorhba_cmnd_done)(struct scsi_cmnd *) = scsi_done; - struct uiscmdrsp *cmdrsp; - struct scsi_device *scsidev = scsicmd->device; - int insert_location; - unsigned char *cdb = scsicmd->cmnd; - struct Scsi_Host *scsihost = scsidev->host; - unsigned int i; - struct visorhba_devdata *devdata = - (struct visorhba_devdata *)scsihost->hostdata; - struct scatterlist *sg = NULL; - struct scatterlist *sglist = NULL; - - if (devdata->serverdown || devdata->serverchangingstate) - return SCSI_MLQUEUE_DEVICE_BUSY; - - insert_location = add_scsipending_entry(devdata, CMD_SCSI_TYPE, - (void *)scsicmd); - if (insert_location < 0) - return SCSI_MLQUEUE_DEVICE_BUSY; - - cmdrsp = get_scsipending_cmdrsp(devdata, insert_location); - cmdrsp->cmdtype = CMD_SCSI_TYPE; - /* save the pending insertion location. Deletion from pending - * will return the scsicmd pointer for completion - */ - cmdrsp->scsi.handle = insert_location; - - WARN_ON_ONCE(visorhba_cmnd_done != scsi_done); - /* save destination */ - cmdrsp->scsi.vdest.channel = scsidev->channel; - cmdrsp->scsi.vdest.id = scsidev->id; - cmdrsp->scsi.vdest.lun = scsidev->lun; - /* save datadir */ - cmdrsp->scsi.data_dir = - dma_data_dir_linux_to_spar(scsicmd->sc_data_direction); - memcpy(cmdrsp->scsi.cmnd, cdb, MAX_CMND_SIZE); - cmdrsp->scsi.bufflen = scsi_bufflen(scsicmd); - - /* keep track of the max buffer length so far. */ - if (cmdrsp->scsi.bufflen > devdata->max_buff_len) - devdata->max_buff_len = cmdrsp->scsi.bufflen; - - if (scsi_sg_count(scsicmd) > MAX_PHYS_INFO) - goto err_del_scsipending_ent; - - /* convert buffer to phys information */ - /* buffer is scatterlist - copy it out */ - sglist = scsi_sglist(scsicmd); - - for_each_sg(sglist, sg, scsi_sg_count(scsicmd), i) { - cmdrsp->scsi.gpi_list[i].address = sg_phys(sg); - cmdrsp->scsi.gpi_list[i].length = sg->length; - } - cmdrsp->scsi.guest_phys_entries = scsi_sg_count(scsicmd); - - if (visorchannel_signalinsert(devdata->dev->visorchannel, - IOCHAN_TO_IOPART, - cmdrsp)) - /* queue must be full and we aren't going to wait */ - goto err_del_scsipending_ent; - - return 0; - -err_del_scsipending_ent: - del_scsipending_ent(devdata, insert_location); - return SCSI_MLQUEUE_DEVICE_BUSY; -} - -#ifdef DEF_SCSI_QCMD -static DEF_SCSI_QCMD(visorhba_queue_command) -#else -#define visorhba_queue_command visorhba_queue_command_lck -#endif - -/* - * visorhba_slave_alloc - Called when new disk is discovered - * @scsidev: New disk - * - * Create a new visordisk_info structure and add it to our - * list of vdisks. - * - * Return: 0 on success, -ENOMEM on failure. - */ -static int visorhba_slave_alloc(struct scsi_device *scsidev) -{ - /* this is called by the midlayer before scan for new devices -- - * LLD can alloc any struct & do init if needed. - */ - struct visordisk_info *vdisk; - struct visorhba_devdata *devdata; - struct Scsi_Host *scsihost = (struct Scsi_Host *)scsidev->host; - - /* already allocated return success */ - if (scsidev->hostdata) - return 0; - - /* even though we errored, treat as success */ - devdata = (struct visorhba_devdata *)scsihost->hostdata; - if (!devdata) - return 0; - - vdisk = kzalloc(sizeof(*vdisk), GFP_ATOMIC); - if (!vdisk) - return -ENOMEM; - - vdisk->sdev = scsidev; - scsidev->hostdata = vdisk; - return 0; -} - -/* - * visorhba_slave_destroy - Disk is going away, clean up resources. - * @scsidev: Scsi device to destroy - */ -static void visorhba_slave_destroy(struct scsi_device *scsidev) -{ - /* midlevel calls this after device has been quiesced and - * before it is to be deleted. - */ - struct visordisk_info *vdisk; - - vdisk = scsidev->hostdata; - scsidev->hostdata = NULL; - kfree(vdisk); -} - -static struct scsi_host_template visorhba_driver_template = { - .name = "Unisys Visor HBA", - .info = visorhba_get_info, - .queuecommand = visorhba_queue_command, - .eh_abort_handler = visorhba_abort_handler, - .eh_device_reset_handler = visorhba_device_reset_handler, - .eh_bus_reset_handler = visorhba_bus_reset_handler, - .eh_host_reset_handler = visorhba_host_reset_handler, -#define visorhba_MAX_CMNDS 128 - .can_queue = visorhba_MAX_CMNDS, - .sg_tablesize = 64, - .this_id = -1, - .slave_alloc = visorhba_slave_alloc, - .slave_destroy = visorhba_slave_destroy, -}; - -/* - * info_debugfs_show - Debugfs interface to dump visorhba states - * @seq: The sequence file to write information to - * @v: Unused, but needed for use with seq file single_open invocation - * - * Presents a file in the debugfs tree named: /visorhba/vbus:dev/info. - * - * Return: SUCCESS - */ -static int info_debugfs_show(struct seq_file *seq, void *v) -{ - struct visorhba_devdata *devdata = seq->private; - - seq_printf(seq, "max_buff_len = %u\n", devdata->max_buff_len); - seq_printf(seq, "interrupts_rcvd = %llu\n", devdata->interrupts_rcvd); - seq_printf(seq, "interrupts_disabled = %llu\n", - devdata->interrupts_disabled); - seq_printf(seq, "interrupts_notme = %llu\n", - devdata->interrupts_notme); - seq_printf(seq, "flags_addr = %p\n", devdata->flags_addr); - if (devdata->flags_addr) { - u64 phys_flags_addr = - virt_to_phys((__force void *)devdata->flags_addr); - seq_printf(seq, "phys_flags_addr = 0x%016llx\n", - phys_flags_addr); - seq_printf(seq, "FeatureFlags = %llu\n", - (u64)readq(devdata->flags_addr)); - } - seq_printf(seq, "acquire_failed_cnt = %llu\n", - devdata->acquire_failed_cnt); - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(info_debugfs); - -/* - * complete_taskmgmt_command - Complete task management - * @idrtable: The data object maintaining the pointer<-->int mappings - * @cmdrsp: Response from the IOVM - * @result: The result of the task management command - * - * Service Partition returned the result of the task management - * command. Wake up anyone waiting for it. - */ -static void complete_taskmgmt_command(struct xarray *xa, - struct uiscmdrsp *cmdrsp, int result) -{ - wait_queue_head_t *wq = - xa_load(xa, cmdrsp->scsitaskmgmt.notify_handle); - int *scsi_result_ptr = - xa_load(xa, cmdrsp->scsitaskmgmt.notifyresult_handle); - if (unlikely(!(wq && scsi_result_ptr))) { - pr_err("visorhba: no completion context; cmd will time out\n"); - return; - } - - /* copy the result of the taskmgmt and - * wake up the error handler that is waiting for this - */ - pr_debug("visorhba: notifying initiator with result=0x%x\n", result); - *scsi_result_ptr = result; - wake_up_all(wq); -} - -/* - * visorhba_serverdown_complete - Called when we are done cleaning up - * from serverdown - * @devdata: Visorhba instance on which to complete serverdown - * - * Called when we are done cleanning up from serverdown, stop processing - * queue, fail pending IOs. - */ -static void visorhba_serverdown_complete(struct visorhba_devdata *devdata) -{ - int i; - struct scsipending *pendingdel = NULL; - struct scsi_cmnd *scsicmd = NULL; - struct uiscmdrsp *cmdrsp; - unsigned long flags; - - /* Stop using the IOVM response queue (queue should be drained - * by the end) - */ - visorbus_disable_channel_interrupts(devdata->dev); - - /* Fail commands that weren't completed */ - spin_lock_irqsave(&devdata->privlock, flags); - for (i = 0; i < MAX_PENDING_REQUESTS; i++) { - pendingdel = &devdata->pending[i]; - switch (pendingdel->cmdtype) { - case CMD_SCSI_TYPE: - scsicmd = pendingdel->sent; - scsicmd->result = DID_RESET << 16; - scsi_done(scsicmd); - break; - case CMD_SCSITASKMGMT_TYPE: - cmdrsp = pendingdel->sent; - complete_taskmgmt_command(&devdata->xa, cmdrsp, - TASK_MGMT_FAILED); - break; - default: - break; - } - pendingdel->cmdtype = 0; - pendingdel->sent = NULL; - } - spin_unlock_irqrestore(&devdata->privlock, flags); - - devdata->serverdown = true; - devdata->serverchangingstate = false; -} - -/* - * visorhba_serverdown - Got notified that the IOVM is down - * @devdata: Visorhba that is being serviced by downed IOVM - * - * Something happened to the IOVM, return immediately and - * schedule cleanup work. - * - * Return: 0 on success, -EINVAL on failure - */ -static int visorhba_serverdown(struct visorhba_devdata *devdata) -{ - if (!devdata->serverdown && !devdata->serverchangingstate) { - devdata->serverchangingstate = true; - visorhba_serverdown_complete(devdata); - } else if (devdata->serverchangingstate) { - return -EINVAL; - } - return 0; -} - -/* - * do_scsi_linuxstat - Scsi command returned linuxstat - * @cmdrsp: Response from IOVM - * @scsicmd: Command issued - * - * Don't log errors for disk-not-present inquiries. - */ -static void do_scsi_linuxstat(struct uiscmdrsp *cmdrsp, - struct scsi_cmnd *scsicmd) -{ - struct visordisk_info *vdisk; - struct scsi_device *scsidev; - - scsidev = scsicmd->device; - memcpy(scsicmd->sense_buffer, cmdrsp->scsi.sensebuf, MAX_SENSE_SIZE); - - /* Do not log errors for disk-not-present inquiries */ - if (cmdrsp->scsi.cmnd[0] == INQUIRY && - (host_byte(cmdrsp->scsi.linuxstat) == DID_NO_CONNECT) && - cmdrsp->scsi.addlstat == ADDL_SEL_TIMEOUT) - return; - /* Okay see what our error_count is here.... */ - vdisk = scsidev->hostdata; - if (atomic_read(&vdisk->error_count) < VISORHBA_ERROR_COUNT) { - atomic_inc(&vdisk->error_count); - atomic_set(&vdisk->ios_threshold, IOS_ERROR_THRESHOLD); - } -} - -static int set_no_disk_inquiry_result(unsigned char *buf, size_t len, - bool is_lun0) -{ - if (len < NO_DISK_INQUIRY_RESULT_LEN) - return -EINVAL; - memset(buf, 0, NO_DISK_INQUIRY_RESULT_LEN); - buf[2] = SCSI_SPC2_VER; - if (is_lun0) { - buf[0] = DEV_DISK_CAPABLE_NOT_PRESENT; - buf[3] = DEV_HISUPPORT; - } else { - buf[0] = DEV_NOT_CAPABLE; - } - buf[4] = NO_DISK_INQUIRY_RESULT_LEN - 5; - strncpy(buf + 8, "DELLPSEUDO DEVICE .", NO_DISK_INQUIRY_RESULT_LEN - 8); - return 0; -} - -/* - * do_scsi_nolinuxstat - Scsi command didn't have linuxstat - * @cmdrsp: Response from IOVM - * @scsicmd: Command issued - * - * Handle response when no linuxstat was returned. - */ -static void do_scsi_nolinuxstat(struct uiscmdrsp *cmdrsp, - struct scsi_cmnd *scsicmd) -{ - struct scsi_device *scsidev; - unsigned char *buf; - struct scatterlist *sg; - unsigned int i; - char *this_page; - char *this_page_orig; - int bufind = 0; - struct visordisk_info *vdisk; - - scsidev = scsicmd->device; - if (cmdrsp->scsi.cmnd[0] == INQUIRY && - cmdrsp->scsi.bufflen >= MIN_INQUIRY_RESULT_LEN) { - if (cmdrsp->scsi.no_disk_result == 0) - return; - - buf = kzalloc(36, GFP_KERNEL); - if (!buf) - return; - - /* Linux scsi code wants a device at Lun 0 - * to issue report luns, but we don't want - * a disk there so we'll present a processor - * there. - */ - set_no_disk_inquiry_result(buf, (size_t)cmdrsp->scsi.bufflen, - scsidev->lun == 0); - - if (scsi_sg_count(scsicmd) == 0) { - memcpy(scsi_sglist(scsicmd), buf, - cmdrsp->scsi.bufflen); - kfree(buf); - return; - } - - scsi_for_each_sg(scsicmd, sg, scsi_sg_count(scsicmd), i) { - this_page_orig = kmap_atomic(sg_page(sg)); - this_page = (void *)((unsigned long)this_page_orig | - sg->offset); - memcpy(this_page, buf + bufind, sg->length); - kunmap_atomic(this_page_orig); - } - kfree(buf); - } else { - vdisk = scsidev->hostdata; - if (atomic_read(&vdisk->ios_threshold) > 0) { - atomic_dec(&vdisk->ios_threshold); - if (atomic_read(&vdisk->ios_threshold) == 0) - atomic_set(&vdisk->error_count, 0); - } - } -} - -/* - * complete_scsi_command - Complete a scsi command - * @uiscmdrsp: Response from Service Partition - * @scsicmd: The scsi command - * - * Response was returned by the Service Partition. Finish it and send - * completion to the scsi midlayer. - */ -static void complete_scsi_command(struct uiscmdrsp *cmdrsp, - struct scsi_cmnd *scsicmd) -{ - /* take what we need out of cmdrsp and complete the scsicmd */ - scsicmd->result = cmdrsp->scsi.linuxstat; - if (cmdrsp->scsi.linuxstat) - do_scsi_linuxstat(cmdrsp, scsicmd); - else - do_scsi_nolinuxstat(cmdrsp, scsicmd); - - scsi_done(scsicmd); -} - -/* - * drain_queue - Pull responses out of iochannel - * @cmdrsp: Response from the IOSP - * @devdata: Device that owns this iochannel - * - * Pulls responses out of the iochannel and process the responses. - */ -static void drain_queue(struct uiscmdrsp *cmdrsp, - struct visorhba_devdata *devdata) -{ - struct scsi_cmnd *scsicmd; - - while (1) { - /* queue empty */ - if (visorchannel_signalremove(devdata->dev->visorchannel, - IOCHAN_FROM_IOPART, - cmdrsp)) - break; - if (cmdrsp->cmdtype == CMD_SCSI_TYPE) { - /* scsicmd location is returned by the - * deletion - */ - scsicmd = del_scsipending_ent(devdata, - cmdrsp->scsi.handle); - if (!scsicmd) - break; - /* complete the orig cmd */ - complete_scsi_command(cmdrsp, scsicmd); - } else if (cmdrsp->cmdtype == CMD_SCSITASKMGMT_TYPE) { - if (!del_scsipending_ent(devdata, - cmdrsp->scsitaskmgmt.handle)) - break; - complete_taskmgmt_command(&devdata->xa, cmdrsp, - cmdrsp->scsitaskmgmt.result); - } else if (cmdrsp->cmdtype == CMD_NOTIFYGUEST_TYPE) - dev_err_once(&devdata->dev->device, - "ignoring unsupported NOTIFYGUEST\n"); - /* cmdrsp is now available for re-use */ - } -} - -/* - * This is used only when this driver is active as an hba driver in the - * client guest partition. It is called periodically so we can obtain - * and process the command respond from the IO Service Partition periodically. - */ -static void visorhba_channel_interrupt(struct visor_device *dev) -{ - struct visorhba_devdata *devdata = dev_get_drvdata(&dev->device); - - if (!devdata) - return; - - drain_queue(devdata->cmdrsp, devdata); -} - -/* - * visorhba_pause - Function to handle visorbus pause messages - * @dev: Device that is pausing - * @complete_func: Function to call when finished - * - * Something has happened to the IO Service Partition that is - * handling this device. Quiet this device and reset commands - * so that the Service Partition can be corrected. - * - * Return: SUCCESS - */ -static int visorhba_pause(struct visor_device *dev, - visorbus_state_complete_func complete_func) -{ - struct visorhba_devdata *devdata = dev_get_drvdata(&dev->device); - - visorhba_serverdown(devdata); - complete_func(dev, 0); - return 0; -} - -/* - * visorhba_resume - Function called when the IO Service Partition is back - * @dev: Device that is pausing - * @complete_func: Function to call when finished - * - * Yay! The IO Service Partition is back, the channel has been wiped - * so lets re-establish connection and start processing responses. - * - * Return: 0 on success, -EINVAL on failure - */ -static int visorhba_resume(struct visor_device *dev, - visorbus_state_complete_func complete_func) -{ - struct visorhba_devdata *devdata; - - devdata = dev_get_drvdata(&dev->device); - if (!devdata) - return -EINVAL; - - if (devdata->serverdown && !devdata->serverchangingstate) - devdata->serverchangingstate = true; - - visorbus_enable_channel_interrupts(dev); - devdata->serverdown = false; - devdata->serverchangingstate = false; - - return 0; -} - -/* - * visorhba_probe - Device has been discovered; do acquire - * @dev: visor_device that was discovered - * - * A new HBA was discovered; do the initial connections of it. - * - * Return: 0 on success, otherwise error code - */ -static int visorhba_probe(struct visor_device *dev) -{ - struct Scsi_Host *scsihost; - struct vhba_config_max max; - struct visorhba_devdata *devdata = NULL; - int err, channel_offset; - u64 features; - - scsihost = scsi_host_alloc(&visorhba_driver_template, - sizeof(*devdata)); - if (!scsihost) - return -ENODEV; - - channel_offset = offsetof(struct visor_io_channel, vhba.max); - err = visorbus_read_channel(dev, channel_offset, &max, - sizeof(struct vhba_config_max)); - if (err < 0) - goto err_scsi_host_put; - - scsihost->max_id = (unsigned int)max.max_id; - scsihost->max_lun = (unsigned int)max.max_lun; - scsihost->cmd_per_lun = (unsigned int)max.cmd_per_lun; - scsihost->max_sectors = - (unsigned short)(max.max_io_size >> 9); - scsihost->sg_tablesize = - (unsigned short)(max.max_io_size / PAGE_SIZE); - if (scsihost->sg_tablesize > MAX_PHYS_INFO) - scsihost->sg_tablesize = MAX_PHYS_INFO; - err = scsi_add_host(scsihost, &dev->device); - if (err < 0) - goto err_scsi_host_put; - - devdata = (struct visorhba_devdata *)scsihost->hostdata; - devdata->dev = dev; - dev_set_drvdata(&dev->device, devdata); - - devdata->debugfs_dir = debugfs_create_dir(dev_name(&dev->device), - visorhba_debugfs_dir); - if (!devdata->debugfs_dir) { - err = -ENOMEM; - goto err_scsi_remove_host; - } - devdata->debugfs_info = - debugfs_create_file("info", 0440, - devdata->debugfs_dir, devdata, - &info_debugfs_fops); - if (!devdata->debugfs_info) { - err = -ENOMEM; - goto err_debugfs_dir; - } - - spin_lock_init(&devdata->privlock); - devdata->serverdown = false; - devdata->serverchangingstate = false; - devdata->scsihost = scsihost; - - channel_offset = offsetof(struct visor_io_channel, - channel_header.features); - err = visorbus_read_channel(dev, channel_offset, &features, 8); - if (err) - goto err_debugfs_info; - features |= VISOR_CHANNEL_IS_POLLING; - err = visorbus_write_channel(dev, channel_offset, &features, 8); - if (err) - goto err_debugfs_info; - - xa_init(&devdata->xa); - - devdata->cmdrsp = kmalloc(sizeof(*devdata->cmdrsp), GFP_ATOMIC); - visorbus_enable_channel_interrupts(dev); - - scsi_scan_host(scsihost); - - return 0; - -err_debugfs_info: - debugfs_remove(devdata->debugfs_info); - -err_debugfs_dir: - debugfs_remove_recursive(devdata->debugfs_dir); - -err_scsi_remove_host: - scsi_remove_host(scsihost); - -err_scsi_host_put: - scsi_host_put(scsihost); - return err; -} - -/* - * visorhba_remove - Remove a visorhba device - * @dev: Device to remove - * - * Removes the visorhba device. - */ -static void visorhba_remove(struct visor_device *dev) -{ - struct visorhba_devdata *devdata = dev_get_drvdata(&dev->device); - struct Scsi_Host *scsihost = NULL; - - if (!devdata) - return; - - scsihost = devdata->scsihost; - kfree(devdata->cmdrsp); - visorbus_disable_channel_interrupts(dev); - scsi_remove_host(scsihost); - scsi_host_put(scsihost); - - dev_set_drvdata(&dev->device, NULL); - debugfs_remove(devdata->debugfs_info); - debugfs_remove_recursive(devdata->debugfs_dir); -} - -/* This is used to tell the visorbus driver which types of visor devices - * we support, and what functions to call when a visor device that we support - * is attached or removed. - */ -static struct visor_driver visorhba_driver = { - .name = "visorhba", - .owner = THIS_MODULE, - .channel_types = visorhba_channel_types, - .probe = visorhba_probe, - .remove = visorhba_remove, - .pause = visorhba_pause, - .resume = visorhba_resume, - .channel_interrupt = visorhba_channel_interrupt, -}; - -/* - * visorhba_init - Driver init routine - * - * Initialize the visorhba driver and register it with visorbus - * to handle s-Par virtual host bus adapter. - * - * Return: 0 on success, error code otherwise - */ -static int visorhba_init(void) -{ - int rc; - - visorhba_debugfs_dir = debugfs_create_dir("visorhba", NULL); - if (!visorhba_debugfs_dir) - return -ENOMEM; - - rc = visorbus_register_visor_driver(&visorhba_driver); - if (rc) - goto cleanup_debugfs; - - return 0; - -cleanup_debugfs: - debugfs_remove_recursive(visorhba_debugfs_dir); - - return rc; -} - -/* - * visorhba_exit - Driver exit routine - * - * Unregister driver from the bus and free up memory. - */ -static void visorhba_exit(void) -{ - visorbus_unregister_visor_driver(&visorhba_driver); - debugfs_remove_recursive(visorhba_debugfs_dir); -} - -module_init(visorhba_init); -module_exit(visorhba_exit); - -MODULE_AUTHOR("Unisys"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("s-Par HBA driver for virtual SCSI host busses"); diff --git a/drivers/staging/unisys/visorinput/Kconfig b/drivers/staging/unisys/visorinput/Kconfig deleted file mode 100644 index 5f036393aee9..000000000000 --- a/drivers/staging/unisys/visorinput/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Unisys visorinput configuration -# - -config UNISYS_VISORINPUT - tristate "Unisys visorinput driver" - depends on UNISYSSPAR && UNISYS_VISORBUS && INPUT - help - The Unisys s-Par visorinput driver provides a virtualized system - console (keyboard and mouse) that is accessible through the - s-Par firmware's user interface. s-Par provides video using the EFI - GOP protocol, so If this driver is not present, the Linux guest should - still boot with visible output in the partition desktop, but keyboard - and mouse interaction will not be available. - diff --git a/drivers/staging/unisys/visorinput/Makefile b/drivers/staging/unisys/visorinput/Makefile deleted file mode 100644 index 68ced7c8a65f..000000000000 --- a/drivers/staging/unisys/visorinput/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Unisys visorinput -# - -obj-$(CONFIG_UNISYS_VISORINPUT) += visorinput.o - diff --git a/drivers/staging/unisys/visorinput/visorinput.c b/drivers/staging/unisys/visorinput/visorinput.c deleted file mode 100644 index dffa71ac3cc5..000000000000 --- a/drivers/staging/unisys/visorinput/visorinput.c +++ /dev/null @@ -1,788 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2011 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -/* - * This driver lives in a generic guest Linux partition, and registers to - * receive keyboard and mouse channels from the visorbus driver. It reads - * inputs from such channels, and delivers it to the Linux OS in the - * standard way the Linux expects for input drivers. - */ - -#include -#include -#include -#include -#include -#include - -/* These defines identify mouse and keyboard activity which is specified by the - * firmware to the host using the cmsimpleinput protocol. @ingroup coretypes - */ -/* only motion; arg1=x, arg2=y */ -#define INPUTACTION_XY_MOTION 1 - -/* arg1: 1=left,2=center,3=right */ -#define INPUTACTION_MOUSE_BUTTON_DOWN 2 -#define INPUTACTION_MOUSE_BUTTON_UP 3 -#define INPUTACTION_MOUSE_BUTTON_CLICK 4 -#define INPUTACTION_MOUSE_BUTTON_DCLICK 5 - -/* arg1: wheel rotation away from/toward user */ -#define INPUTACTION_WHEEL_ROTATE_AWAY 6 -#define INPUTACTION_WHEEL_ROTATE_TOWARD 7 - -/* arg1: scancode, as follows: If arg1 <= 0xff, it's a 1-byte scancode and arg1 - * is that scancode. If arg1 > 0xff, it's a 2-byte scanecode, with the 1st - * byte in the low 8 bits, and the 2nd byte in the high 8 bits. - * E.g., the right ALT key would appear as x'38e0'. - */ -#define INPUTACTION_KEY_DOWN 64 -#define INPUTACTION_KEY_UP 65 -#define INPUTACTION_KEY_DOWN_UP 67 - -/* arg1: scancode (in same format as inputaction_keyDown); MUST refer to one of - * the locking keys, like capslock, numlock, or scrolllock. - * arg2: 1 iff locking key should be in the LOCKED position (e.g., light is ON) - */ -#define INPUTACTION_SET_LOCKING_KEY_STATE 66 - -/* Keyboard channel {c73416d0-b0b8-44af-b304-9d2ae99f1b3d} */ -#define VISOR_KEYBOARD_CHANNEL_GUID \ - GUID_INIT(0xc73416d0, 0xb0b8, 0x44af, \ - 0xb3, 0x4, 0x9d, 0x2a, 0xe9, 0x9f, 0x1b, 0x3d) -#define VISOR_KEYBOARD_CHANNEL_GUID_STR "c73416d0-b0b8-44af-b304-9d2ae99f1b3d" - -/* Mouse channel {addf07d4-94a9-46e2-81c3-61abcdbdbd87} */ -#define VISOR_MOUSE_CHANNEL_GUID \ - GUID_INIT(0xaddf07d4, 0x94a9, 0x46e2, \ - 0x81, 0xc3, 0x61, 0xab, 0xcd, 0xbd, 0xbd, 0x87) -#define VISOR_MOUSE_CHANNEL_GUID_STR "addf07d4-94a9-46e2-81c3-61abcdbdbd87" - -#define PIXELS_ACROSS_DEFAULT 1024 -#define PIXELS_DOWN_DEFAULT 768 -#define KEYCODE_TABLE_BYTES 256 - -struct visor_inputactivity { - u16 action; - u16 arg1; - u16 arg2; - u16 arg3; -} __packed; - -struct visor_inputreport { - u64 seq_no; - struct visor_inputactivity activity; -} __packed; - -/* header of keyboard/mouse channels */ -struct visor_input_channel_data { - u32 n_input_reports; - union { - struct { - u16 x_res; - u16 y_res; - } mouse; - struct { - u32 flags; - } keyboard; - }; -} __packed; - -enum visorinput_dev_type { - visorinput_keyboard, - visorinput_mouse, -}; - -/* - * This is the private data that we store for each device. A pointer to this - * struct is maintained via dev_get_drvdata() / dev_set_drvdata() for each - * struct device. - */ -struct visorinput_devdata { - struct visor_device *dev; - /* lock for dev */ - struct mutex lock_visor_dev; - struct input_dev *visorinput_dev; - bool paused; - bool interrupts_enabled; - /* size of following array */ - unsigned int keycode_table_bytes; - /* for keyboard devices: visorkbd_keycode[] + visorkbd_ext_keycode[] */ - unsigned char keycode_table[]; -}; - -static const guid_t visor_keyboard_channel_guid = VISOR_KEYBOARD_CHANNEL_GUID; -static const guid_t visor_mouse_channel_guid = VISOR_MOUSE_CHANNEL_GUID; - -/* - * Borrowed from drivers/input/keyboard/atakbd.c - * This maps 1-byte scancodes to keycodes. - */ -static const unsigned char visorkbd_keycode[KEYCODE_TABLE_BYTES] = { - /* American layout */ - [0] = KEY_GRAVE, - [1] = KEY_ESC, - [2] = KEY_1, - [3] = KEY_2, - [4] = KEY_3, - [5] = KEY_4, - [6] = KEY_5, - [7] = KEY_6, - [8] = KEY_7, - [9] = KEY_8, - [10] = KEY_9, - [11] = KEY_0, - [12] = KEY_MINUS, - [13] = KEY_EQUAL, - [14] = KEY_BACKSPACE, - [15] = KEY_TAB, - [16] = KEY_Q, - [17] = KEY_W, - [18] = KEY_E, - [19] = KEY_R, - [20] = KEY_T, - [21] = KEY_Y, - [22] = KEY_U, - [23] = KEY_I, - [24] = KEY_O, - [25] = KEY_P, - [26] = KEY_LEFTBRACE, - [27] = KEY_RIGHTBRACE, - [28] = KEY_ENTER, - [29] = KEY_LEFTCTRL, - [30] = KEY_A, - [31] = KEY_S, - [32] = KEY_D, - [33] = KEY_F, - [34] = KEY_G, - [35] = KEY_H, - [36] = KEY_J, - [37] = KEY_K, - [38] = KEY_L, - [39] = KEY_SEMICOLON, - [40] = KEY_APOSTROPHE, - [41] = KEY_GRAVE, - [42] = KEY_LEFTSHIFT, - [43] = KEY_BACKSLASH, - [44] = KEY_Z, - [45] = KEY_X, - [46] = KEY_C, - [47] = KEY_V, - [48] = KEY_B, - [49] = KEY_N, - [50] = KEY_M, - [51] = KEY_COMMA, - [52] = KEY_DOT, - [53] = KEY_SLASH, - [54] = KEY_RIGHTSHIFT, - [55] = KEY_KPASTERISK, - [56] = KEY_LEFTALT, - [57] = KEY_SPACE, - [58] = KEY_CAPSLOCK, - [59] = KEY_F1, - [60] = KEY_F2, - [61] = KEY_F3, - [62] = KEY_F4, - [63] = KEY_F5, - [64] = KEY_F6, - [65] = KEY_F7, - [66] = KEY_F8, - [67] = KEY_F9, - [68] = KEY_F10, - [69] = KEY_NUMLOCK, - [70] = KEY_SCROLLLOCK, - [71] = KEY_KP7, - [72] = KEY_KP8, - [73] = KEY_KP9, - [74] = KEY_KPMINUS, - [75] = KEY_KP4, - [76] = KEY_KP5, - [77] = KEY_KP6, - [78] = KEY_KPPLUS, - [79] = KEY_KP1, - [80] = KEY_KP2, - [81] = KEY_KP3, - [82] = KEY_KP0, - [83] = KEY_KPDOT, - /* enables UK backslash+pipe key and FR lessthan+greaterthan key */ - [86] = KEY_102ND, - [87] = KEY_F11, - [88] = KEY_F12, - [90] = KEY_KPLEFTPAREN, - [91] = KEY_KPRIGHTPAREN, - [92] = KEY_KPASTERISK, - [93] = KEY_KPASTERISK, - [94] = KEY_KPPLUS, - [95] = KEY_HELP, - [96] = KEY_KPENTER, - [97] = KEY_RIGHTCTRL, - [98] = KEY_KPSLASH, - [99] = KEY_KPLEFTPAREN, - [100] = KEY_KPRIGHTPAREN, - [101] = KEY_KPSLASH, - [102] = KEY_HOME, - [103] = KEY_UP, - [104] = KEY_PAGEUP, - [105] = KEY_LEFT, - [106] = KEY_RIGHT, - [107] = KEY_END, - [108] = KEY_DOWN, - [109] = KEY_PAGEDOWN, - [110] = KEY_INSERT, - [111] = KEY_DELETE, - [112] = KEY_MACRO, - [113] = KEY_MUTE -}; - -/* - * This maps the in extended scancodes of the form "0xE0 " into - * keycodes. - */ -static const unsigned char visorkbd_ext_keycode[KEYCODE_TABLE_BYTES] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x00 */ - 0, 0, 0, 0, 0, 0, 0, 0, /* 0x10 */ - 0, 0, 0, 0, KEY_KPENTER, KEY_RIGHTCTRL, 0, 0, /* 0x18 */ - 0, 0, 0, 0, 0, 0, 0, 0, /* 0x20 */ - KEY_RIGHTALT, 0, 0, 0, 0, 0, 0, 0, /* 0x28 */ - 0, 0, 0, 0, 0, 0, 0, 0, /* 0x30 */ - KEY_RIGHTALT /* AltGr */, 0, 0, 0, 0, 0, 0, 0, /* 0x38 */ - 0, 0, 0, 0, 0, 0, 0, KEY_HOME, /* 0x40 */ - KEY_UP, KEY_PAGEUP, 0, KEY_LEFT, 0, KEY_RIGHT, 0, KEY_END, /* 0x48 */ - KEY_DOWN, KEY_PAGEDOWN, KEY_INSERT, KEY_DELETE, 0, 0, 0, 0, /* 0x50 */ - 0, 0, 0, 0, 0, 0, 0, 0, /* 0x58 */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x60 */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x70 */ -}; - -static int visorinput_open(struct input_dev *visorinput_dev) -{ - struct visorinput_devdata *devdata = input_get_drvdata(visorinput_dev); - - if (!devdata) { - dev_err(&visorinput_dev->dev, - "%s input_get_drvdata(%p) returned NULL\n", - __func__, visorinput_dev); - return -EINVAL; - } - dev_dbg(&visorinput_dev->dev, "%s opened\n", __func__); - - /* - * If we're not paused, really enable interrupts. Regardless of whether - * we are paused, set a flag indicating interrupts should be enabled so - * when we resume, interrupts will really be enabled. - */ - mutex_lock(&devdata->lock_visor_dev); - devdata->interrupts_enabled = true; - if (devdata->paused) - goto out_unlock; - visorbus_enable_channel_interrupts(devdata->dev); - -out_unlock: - mutex_unlock(&devdata->lock_visor_dev); - return 0; -} - -static void visorinput_close(struct input_dev *visorinput_dev) -{ - struct visorinput_devdata *devdata = input_get_drvdata(visorinput_dev); - - if (!devdata) { - dev_err(&visorinput_dev->dev, - "%s input_get_drvdata(%p) returned NULL\n", - __func__, visorinput_dev); - return; - } - dev_dbg(&visorinput_dev->dev, "%s closed\n", __func__); - - /* - * If we're not paused, really disable interrupts. Regardless of - * whether we are paused, set a flag indicating interrupts should be - * disabled so when we resume we will not re-enable them. - */ - mutex_lock(&devdata->lock_visor_dev); - devdata->interrupts_enabled = false; - if (devdata->paused) - goto out_unlock; - visorbus_disable_channel_interrupts(devdata->dev); - -out_unlock: - mutex_unlock(&devdata->lock_visor_dev); -} - -/* - * setup_client_keyboard() initializes and returns a Linux input node that we - * can use to deliver keyboard inputs to Linux. We of course do this when we - * see keyboard inputs coming in on a keyboard channel. - */ -static struct input_dev *setup_client_keyboard(void *devdata, - unsigned char *keycode_table) - -{ - int i; - struct input_dev *visorinput_dev = input_allocate_device(); - - if (!visorinput_dev) - return NULL; - - visorinput_dev->name = "visor Keyboard"; - visorinput_dev->phys = "visorkbd:input0"; - visorinput_dev->id.bustype = BUS_VIRTUAL; - visorinput_dev->id.vendor = 0x0001; - visorinput_dev->id.product = 0x0001; - visorinput_dev->id.version = 0x0100; - - visorinput_dev->evbit[0] = BIT_MASK(EV_KEY) | - BIT_MASK(EV_REP) | - BIT_MASK(EV_LED); - visorinput_dev->ledbit[0] = BIT_MASK(LED_CAPSL) | - BIT_MASK(LED_SCROLLL) | - BIT_MASK(LED_NUML); - visorinput_dev->keycode = keycode_table; - /* sizeof(unsigned char) */ - visorinput_dev->keycodesize = 1; - visorinput_dev->keycodemax = KEYCODE_TABLE_BYTES; - - for (i = 1; i < visorinput_dev->keycodemax; i++) - set_bit(keycode_table[i], visorinput_dev->keybit); - for (i = 1; i < visorinput_dev->keycodemax; i++) - set_bit(keycode_table[i + KEYCODE_TABLE_BYTES], - visorinput_dev->keybit); - - visorinput_dev->open = visorinput_open; - visorinput_dev->close = visorinput_close; - /* pre input_register! */ - input_set_drvdata(visorinput_dev, devdata); - - return visorinput_dev; -} - -static struct input_dev *setup_client_mouse(void *devdata, unsigned int xres, - unsigned int yres) -{ - struct input_dev *visorinput_dev = input_allocate_device(); - - if (!visorinput_dev) - return NULL; - - visorinput_dev->name = "visor Mouse"; - visorinput_dev->phys = "visormou:input0"; - visorinput_dev->id.bustype = BUS_VIRTUAL; - visorinput_dev->id.vendor = 0x0001; - visorinput_dev->id.product = 0x0002; - visorinput_dev->id.version = 0x0100; - - visorinput_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - set_bit(BTN_LEFT, visorinput_dev->keybit); - set_bit(BTN_RIGHT, visorinput_dev->keybit); - set_bit(BTN_MIDDLE, visorinput_dev->keybit); - - if (xres == 0) - xres = PIXELS_ACROSS_DEFAULT; - if (yres == 0) - yres = PIXELS_DOWN_DEFAULT; - input_set_abs_params(visorinput_dev, ABS_X, 0, xres, 0, 0); - input_set_abs_params(visorinput_dev, ABS_Y, 0, yres, 0, 0); - - visorinput_dev->open = visorinput_open; - visorinput_dev->close = visorinput_close; - /* pre input_register! */ - input_set_drvdata(visorinput_dev, devdata); - input_set_capability(visorinput_dev, EV_REL, REL_WHEEL); - - return visorinput_dev; -} - -static struct visorinput_devdata *devdata_create(struct visor_device *dev, - enum visorinput_dev_type dtype) -{ - struct visorinput_devdata *devdata = NULL; - unsigned int extra_bytes = 0; - unsigned int size, xres, yres, err; - struct visor_input_channel_data data; - - if (dtype == visorinput_keyboard) - /* allocate room for devdata->keycode_table, filled in below */ - extra_bytes = KEYCODE_TABLE_BYTES * 2; - devdata = kzalloc(struct_size(devdata, keycode_table, extra_bytes), - GFP_KERNEL); - if (!devdata) - return NULL; - mutex_init(&devdata->lock_visor_dev); - mutex_lock(&devdata->lock_visor_dev); - devdata->dev = dev; - - /* - * visorinput_open() can be called as soon as input_register_device() - * happens, and that will enable channel interrupts. Setting paused - * prevents us from getting into visorinput_channel_interrupt() prior - * to the device structure being totally initialized. - */ - devdata->paused = true; - - /* - * This is an input device in a client guest partition, so we need to - * create whatever input nodes are necessary to deliver our inputs to - * the guest OS. - */ - switch (dtype) { - case visorinput_keyboard: - devdata->keycode_table_bytes = extra_bytes; - memcpy(devdata->keycode_table, visorkbd_keycode, - KEYCODE_TABLE_BYTES); - memcpy(devdata->keycode_table + KEYCODE_TABLE_BYTES, - visorkbd_ext_keycode, KEYCODE_TABLE_BYTES); - devdata->visorinput_dev = setup_client_keyboard - (devdata, devdata->keycode_table); - if (!devdata->visorinput_dev) - goto cleanups_register; - break; - case visorinput_mouse: - size = sizeof(struct visor_input_channel_data); - err = visorbus_read_channel(dev, sizeof(struct channel_header), - &data, size); - if (err) - goto cleanups_register; - xres = data.mouse.x_res; - yres = data.mouse.y_res; - devdata->visorinput_dev = setup_client_mouse(devdata, xres, - yres); - if (!devdata->visorinput_dev) - goto cleanups_register; - break; - default: - /* No other input devices supported */ - break; - } - - dev_set_drvdata(&dev->device, devdata); - mutex_unlock(&devdata->lock_visor_dev); - - /* - * Device struct is completely set up now, with the exception of - * visorinput_dev being registered. We need to unlock before we - * register the device, because this can cause an on-stack call of - * visorinput_open(), which would deadlock if we had the lock. - */ - if (input_register_device(devdata->visorinput_dev)) { - input_free_device(devdata->visorinput_dev); - goto err_kfree_devdata; - } - - mutex_lock(&devdata->lock_visor_dev); - /* - * Establish calls to visorinput_channel_interrupt() if that is the - * desired state that we've kept track of in interrupts_enabled while - * the device was being created. - */ - devdata->paused = false; - if (devdata->interrupts_enabled) - visorbus_enable_channel_interrupts(dev); - mutex_unlock(&devdata->lock_visor_dev); - - return devdata; - -cleanups_register: - mutex_unlock(&devdata->lock_visor_dev); -err_kfree_devdata: - kfree(devdata); - return NULL; -} - -static int visorinput_probe(struct visor_device *dev) -{ - const guid_t *guid; - enum visorinput_dev_type dtype; - - guid = visorchannel_get_guid(dev->visorchannel); - if (guid_equal(guid, &visor_mouse_channel_guid)) - dtype = visorinput_mouse; - else if (guid_equal(guid, &visor_keyboard_channel_guid)) - dtype = visorinput_keyboard; - else - return -ENODEV; - visorbus_disable_channel_interrupts(dev); - if (!devdata_create(dev, dtype)) - return -ENOMEM; - return 0; -} - -static void unregister_client_input(struct input_dev *visorinput_dev) -{ - if (visorinput_dev) - input_unregister_device(visorinput_dev); -} - -static void visorinput_remove(struct visor_device *dev) -{ - struct visorinput_devdata *devdata = dev_get_drvdata(&dev->device); - - if (!devdata) - return; - - mutex_lock(&devdata->lock_visor_dev); - visorbus_disable_channel_interrupts(dev); - - /* - * due to above, at this time no thread of execution will be in - * visorinput_channel_interrupt() - */ - - dev_set_drvdata(&dev->device, NULL); - mutex_unlock(&devdata->lock_visor_dev); - - unregister_client_input(devdata->visorinput_dev); - kfree(devdata); -} - -/* - * Make it so the current locking state of the locking key indicated by - * is as indicated by (1=locked, 0=unlocked). - */ -static void handle_locking_key(struct input_dev *visorinput_dev, int keycode, - int desired_state) -{ - int led; - - switch (keycode) { - case KEY_CAPSLOCK: - led = LED_CAPSL; - break; - case KEY_SCROLLLOCK: - led = LED_SCROLLL; - break; - case KEY_NUMLOCK: - led = LED_NUML; - break; - default: - return; - } - if (test_bit(led, visorinput_dev->led) != desired_state) { - input_report_key(visorinput_dev, keycode, 1); - input_sync(visorinput_dev); - input_report_key(visorinput_dev, keycode, 0); - input_sync(visorinput_dev); - __change_bit(led, visorinput_dev->led); - } -} - -/* - * is either a 1-byte scancode, or an extended 16-bit scancode with - * 0xE0 in the low byte and the extended scancode value in the next higher byte. - */ -static int scancode_to_keycode(int scancode) -{ - if (scancode > 0xff) - return visorkbd_ext_keycode[(scancode >> 8) & 0xff]; - - return visorkbd_keycode[scancode]; -} - -static int calc_button(int x) -{ - switch (x) { - case 1: - return BTN_LEFT; - case 2: - return BTN_MIDDLE; - case 3: - return BTN_RIGHT; - default: - return -EINVAL; - } -} - -/* - * This is used only when this driver is active as an input driver in the - * client guest partition. It is called periodically so we can obtain inputs - * from the channel, and deliver them to the guest OS. - */ -static void visorinput_channel_interrupt(struct visor_device *dev) -{ - struct visor_inputreport r; - int scancode, keycode; - struct input_dev *visorinput_dev; - int xmotion, ymotion, button; - int i; - struct visorinput_devdata *devdata = dev_get_drvdata(&dev->device); - - if (!devdata) - return; - - visorinput_dev = devdata->visorinput_dev; - - while (!visorchannel_signalremove(dev->visorchannel, 0, &r)) { - scancode = r.activity.arg1; - keycode = scancode_to_keycode(scancode); - switch (r.activity.action) { - case INPUTACTION_KEY_DOWN: - input_report_key(visorinput_dev, keycode, 1); - input_sync(visorinput_dev); - break; - case INPUTACTION_KEY_UP: - input_report_key(visorinput_dev, keycode, 0); - input_sync(visorinput_dev); - break; - case INPUTACTION_KEY_DOWN_UP: - input_report_key(visorinput_dev, keycode, 1); - input_sync(visorinput_dev); - input_report_key(visorinput_dev, keycode, 0); - input_sync(visorinput_dev); - break; - case INPUTACTION_SET_LOCKING_KEY_STATE: - handle_locking_key(visorinput_dev, keycode, - r.activity.arg2); - break; - case INPUTACTION_XY_MOTION: - xmotion = r.activity.arg1; - ymotion = r.activity.arg2; - input_report_abs(visorinput_dev, ABS_X, xmotion); - input_report_abs(visorinput_dev, ABS_Y, ymotion); - input_sync(visorinput_dev); - break; - case INPUTACTION_MOUSE_BUTTON_DOWN: - button = calc_button(r.activity.arg1); - if (button < 0) - break; - input_report_key(visorinput_dev, button, 1); - input_sync(visorinput_dev); - break; - case INPUTACTION_MOUSE_BUTTON_UP: - button = calc_button(r.activity.arg1); - if (button < 0) - break; - input_report_key(visorinput_dev, button, 0); - input_sync(visorinput_dev); - break; - case INPUTACTION_MOUSE_BUTTON_CLICK: - button = calc_button(r.activity.arg1); - if (button < 0) - break; - input_report_key(visorinput_dev, button, 1); - input_sync(visorinput_dev); - input_report_key(visorinput_dev, button, 0); - input_sync(visorinput_dev); - break; - case INPUTACTION_MOUSE_BUTTON_DCLICK: - button = calc_button(r.activity.arg1); - if (button < 0) - break; - for (i = 0; i < 2; i++) { - input_report_key(visorinput_dev, button, 1); - input_sync(visorinput_dev); - input_report_key(visorinput_dev, button, 0); - input_sync(visorinput_dev); - } - break; - case INPUTACTION_WHEEL_ROTATE_AWAY: - input_report_rel(visorinput_dev, REL_WHEEL, 1); - input_sync(visorinput_dev); - break; - case INPUTACTION_WHEEL_ROTATE_TOWARD: - input_report_rel(visorinput_dev, REL_WHEEL, -1); - input_sync(visorinput_dev); - break; - default: - /* Unsupported input action */ - break; - } - } -} - -static int visorinput_pause(struct visor_device *dev, - visorbus_state_complete_func complete_func) -{ - int rc; - struct visorinput_devdata *devdata = dev_get_drvdata(&dev->device); - - if (!devdata) { - rc = -ENODEV; - goto out; - } - - mutex_lock(&devdata->lock_visor_dev); - if (devdata->paused) { - rc = -EBUSY; - goto out_locked; - } - if (devdata->interrupts_enabled) - visorbus_disable_channel_interrupts(dev); - - /* - * due to above, at this time no thread of execution will be in - * visorinput_channel_interrupt() - */ - devdata->paused = true; - complete_func(dev, 0); - rc = 0; -out_locked: - mutex_unlock(&devdata->lock_visor_dev); -out: - return rc; -} - -static int visorinput_resume(struct visor_device *dev, - visorbus_state_complete_func complete_func) -{ - int rc; - struct visorinput_devdata *devdata = dev_get_drvdata(&dev->device); - - if (!devdata) { - rc = -ENODEV; - goto out; - } - mutex_lock(&devdata->lock_visor_dev); - if (!devdata->paused) { - rc = -EBUSY; - goto out_locked; - } - devdata->paused = false; - complete_func(dev, 0); - - /* - * Re-establish calls to visorinput_channel_interrupt() if that is the - * desired state that we've kept track of in interrupts_enabled while - * the device was paused. - */ - if (devdata->interrupts_enabled) - visorbus_enable_channel_interrupts(dev); - - rc = 0; -out_locked: - mutex_unlock(&devdata->lock_visor_dev); -out: - return rc; -} - -/* GUIDS for all channel types supported by this driver. */ -static struct visor_channeltype_descriptor visorinput_channel_types[] = { - { VISOR_KEYBOARD_CHANNEL_GUID, "keyboard", - sizeof(struct channel_header), 0 }, - { VISOR_MOUSE_CHANNEL_GUID, "mouse", sizeof(struct channel_header), 0 }, - {} -}; - -static struct visor_driver visorinput_driver = { - .name = "visorinput", - .owner = THIS_MODULE, - .channel_types = visorinput_channel_types, - .probe = visorinput_probe, - .remove = visorinput_remove, - .channel_interrupt = visorinput_channel_interrupt, - .pause = visorinput_pause, - .resume = visorinput_resume, -}; - -module_driver(visorinput_driver, visorbus_register_visor_driver, - visorbus_unregister_visor_driver); - -MODULE_DEVICE_TABLE(visorbus, visorinput_channel_types); - -MODULE_AUTHOR("Unisys"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("s-Par human input driver for virtual keyboard/mouse"); - -MODULE_ALIAS("visorbus:" VISOR_MOUSE_CHANNEL_GUID_STR); -MODULE_ALIAS("visorbus:" VISOR_KEYBOARD_CHANNEL_GUID_STR); diff --git a/drivers/staging/unisys/visornic/Kconfig b/drivers/staging/unisys/visornic/Kconfig deleted file mode 100644 index 3f8f5570821b..000000000000 --- a/drivers/staging/unisys/visornic/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Unisys visornic configuration -# - -config UNISYS_VISORNIC - tristate "Unisys visornic driver" - depends on UNISYSSPAR && UNISYS_VISORBUS && NET - help - The Unisys Visornic driver provides support for s-Par network - devices exposed on the s-Par visorbus. When a message is sent - to visorbus to create a network device, the probe function of - visornic is called to create the netdev device. Networking on - s-Par switches will not work if this driver is not selected. - If you say Y here, you will enable the Unisys visornic driver. - diff --git a/drivers/staging/unisys/visornic/Makefile b/drivers/staging/unisys/visornic/Makefile deleted file mode 100644 index f2984880c340..000000000000 --- a/drivers/staging/unisys/visornic/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Unisys channel -# - -obj-$(CONFIG_UNISYS_VISORNIC) += visornic.o - -visornic-y := visornic_main.o - -ccflags-y += -I $(srctree)/$(src)/../include diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c deleted file mode 100644 index bb7ec492503e..000000000000 --- a/drivers/staging/unisys/visornic/visornic_main.c +++ /dev/null @@ -1,2131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2012 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -/* This driver lives in a spar partition, and registers to ethernet io - * channels from the visorbus driver. It creates netdev devices and - * forwards transmit to the IO channel and accepts rcvs from the IO - * Partition via the IO channel. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "iochannel.h" - -#define VISORNIC_INFINITE_RSP_WAIT 0 - -/* MAX_BUF = 64 lines x 32 MAXVNIC x 80 characters - * = 163840 bytes - */ -#define MAX_BUF 163840 -#define NAPI_WEIGHT 64 - -/* GUIDS for director channel type supported by this driver. */ -/* {8cd5994d-c58e-11da-95a9-00e08161165f} */ -#define VISOR_VNIC_CHANNEL_GUID \ - GUID_INIT(0x8cd5994d, 0xc58e, 0x11da, \ - 0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f) -#define VISOR_VNIC_CHANNEL_GUID_STR \ - "8cd5994d-c58e-11da-95a9-00e08161165f" - -static struct visor_channeltype_descriptor visornic_channel_types[] = { - /* Note that the only channel type we expect to be reported by the - * bus driver is the VISOR_VNIC channel. - */ - { VISOR_VNIC_CHANNEL_GUID, "ultravnic", sizeof(struct channel_header), - VISOR_VNIC_CHANNEL_VERSIONID }, - {} -}; -MODULE_DEVICE_TABLE(visorbus, visornic_channel_types); -/* FIXME XXX: This next line of code must be fixed and removed before - * acceptance into the 'normal' part of the kernel. It is only here as a place - * holder to get module autoloading functionality working for visorbus. Code - * must be added to scripts/mode/file2alias.c, etc., to get this working - * properly. - */ -MODULE_ALIAS("visorbus:" VISOR_VNIC_CHANNEL_GUID_STR); - -struct chanstat { - unsigned long got_rcv; - unsigned long got_enbdisack; - unsigned long got_xmit_done; - unsigned long xmit_fail; - unsigned long sent_enbdis; - unsigned long sent_promisc; - unsigned long sent_post; - unsigned long sent_post_failed; - unsigned long sent_xmit; - unsigned long reject_count; - unsigned long extra_rcvbufs_sent; -}; - -/* struct visornic_devdata - * @enabled: 0 disabled 1 enabled to receive. - * @enab_dis_acked: NET_RCV_ENABLE/DISABLE acked by IOPART. - * @struct *dev: - * @struct *netdev: - * @struct net_stats: - * @interrupt_rcvd: - * @rsp_queue: - * @struct **rcvbuf: - * @incarnation_id: incarnation_id lets IOPART know about - * re-birth. - * @old_flags: flags as they were prior to - * set_multicast_list. - * @usage: count of users. - * @num_rcv_bufs: number of rcv buffers the vnic will post. - * @num_rcv_bufs_could_not_alloc: - * @num_rcvbuf_in_iovm: - * @alloc_failed_in_if_needed_cnt: - * @alloc_failed_in_repost_rtn_cnt: - * @max_outstanding_net_xmits: absolute max number of outstanding xmits - * - should never hit this. - * @upper_threshold_net_xmits: high water mark for calling - * netif_stop_queue(). - * @lower_threshold_net_xmits: high water mark for calling - * netif_wake_queue(). - * @struct xmitbufhead: xmitbufhead - head of the xmit buffer list - * sent to the IOPART end. - * @server_down_complete_func: - * @struct timeout_reset: - * @struct *cmdrsp_rcv: cmdrsp_rcv is used for posting/unposting rcv - * buffers. - * @struct *xmit_cmdrsp: xmit_cmdrsp - issues NET_XMIT - only one - * active xmit at a time. - * @server_down: IOPART is down. - * @server_change_state: Processing SERVER_CHANGESTATE msg. - * @going_away: device is being torn down. - * @interrupts_rcvd: - * @interrupts_notme: - * @interrupts_disabled: - * @busy_cnt: - * @priv_lock: spinlock to access devdata structures. - * @flow_control_upper_hits: - * @flow_control_lower_hits: - * @n_rcv0: # rcvs of 0 buffers. - * @n_rcv1: # rcvs of 1 buffers. - * @n_rcv2: # rcvs of 2 buffers. - * @n_rcvx: # rcvs of >2 buffers. - * @found_repost_rcvbuf_cnt: # repost_rcvbuf_cnt. - * @repost_found_skb_cnt: # of found the skb. - * @n_repost_deficit: # of lost rcv buffers. - * @bad_rcv_buf: # of unknown rcv skb not freed. - * @n_rcv_packets_not_accepted: # bogs rcv packets. - * @queuefullmsg_logged: - * @struct chstat: - * @struct napi: - * @struct cmdrsp: - */ -struct visornic_devdata { - unsigned short enabled; - unsigned short enab_dis_acked; - - struct visor_device *dev; - struct net_device *netdev; - struct net_device_stats net_stats; - atomic_t interrupt_rcvd; - wait_queue_head_t rsp_queue; - struct sk_buff **rcvbuf; - u64 incarnation_id; - unsigned short old_flags; - atomic_t usage; - - int num_rcv_bufs; - int num_rcv_bufs_could_not_alloc; - atomic_t num_rcvbuf_in_iovm; - unsigned long alloc_failed_in_if_needed_cnt; - unsigned long alloc_failed_in_repost_rtn_cnt; - - unsigned long max_outstanding_net_xmits; - unsigned long upper_threshold_net_xmits; - unsigned long lower_threshold_net_xmits; - struct sk_buff_head xmitbufhead; - - visorbus_state_complete_func server_down_complete_func; - struct work_struct timeout_reset; - struct uiscmdrsp *cmdrsp_rcv; - struct uiscmdrsp *xmit_cmdrsp; - bool server_down; - bool server_change_state; - bool going_away; - u64 interrupts_rcvd; - u64 interrupts_notme; - u64 interrupts_disabled; - u64 busy_cnt; - /* spinlock to access devdata structures. */ - spinlock_t priv_lock; - - /* flow control counter */ - u64 flow_control_upper_hits; - u64 flow_control_lower_hits; - - /* debug counters */ - unsigned long n_rcv0; - unsigned long n_rcv1; - unsigned long n_rcv2; - unsigned long n_rcvx; - unsigned long found_repost_rcvbuf_cnt; - unsigned long repost_found_skb_cnt; - unsigned long n_repost_deficit; - unsigned long bad_rcv_buf; - unsigned long n_rcv_packets_not_accepted; - - int queuefullmsg_logged; - struct chanstat chstat; - struct napi_struct napi; - struct uiscmdrsp cmdrsp[SIZEOF_CMDRSP]; -}; - -/* Returns next non-zero index on success or 0 on failure (i.e. out of room). */ -static u16 add_physinfo_entries(u64 inp_pfn, u16 inp_off, u16 inp_len, - u16 index, u16 max_pi_arr_entries, - struct phys_info pi_arr[]) -{ - u16 i, len, firstlen; - - firstlen = PI_PAGE_SIZE - inp_off; - if (inp_len <= firstlen) { - /* The input entry spans only one page - add as is. */ - if (index >= max_pi_arr_entries) - return 0; - pi_arr[index].pi_pfn = inp_pfn; - pi_arr[index].pi_off = (u16)inp_off; - pi_arr[index].pi_len = (u16)inp_len; - return index + 1; - } - - /* This entry spans multiple pages. */ - for (len = inp_len, i = 0; len; - len -= pi_arr[index + i].pi_len, i++) { - if (index + i >= max_pi_arr_entries) - return 0; - pi_arr[index + i].pi_pfn = inp_pfn + i; - if (i == 0) { - pi_arr[index].pi_off = inp_off; - pi_arr[index].pi_len = firstlen; - } else { - pi_arr[index + i].pi_off = 0; - pi_arr[index + i].pi_len = min_t(u16, len, - PI_PAGE_SIZE); - } - } - return index + i; -} - -/* visor_copy_fragsinfo_from_skb - copy fragment list in the SKB to a phys_info - * array that the IOPART understands - * @skb: Skbuff that we are pulling the frags from. - * @firstfraglen: Length of first fragment in skb. - * @frags_max: Max len of frags array. - * @frags: Frags array filled in on output. - * - * Return: Positive integer indicating number of entries filled in frags on - * success, negative integer on error. - */ -static int visor_copy_fragsinfo_from_skb(struct sk_buff *skb, - unsigned int firstfraglen, - unsigned int frags_max, - struct phys_info frags[]) -{ - unsigned int count = 0, frag, size, offset = 0, numfrags; - unsigned int total_count; - - numfrags = skb_shinfo(skb)->nr_frags; - - /* Compute the number of fragments this skb has, and if its more than - * frag array can hold, linearize the skb - */ - total_count = numfrags + (firstfraglen / PI_PAGE_SIZE); - if (firstfraglen % PI_PAGE_SIZE) - total_count++; - - if (total_count > frags_max) { - if (skb_linearize(skb)) - return -EINVAL; - numfrags = skb_shinfo(skb)->nr_frags; - firstfraglen = 0; - } - - while (firstfraglen) { - if (count == frags_max) - return -EINVAL; - - frags[count].pi_pfn = - page_to_pfn(virt_to_page(skb->data + offset)); - frags[count].pi_off = - (unsigned long)(skb->data + offset) & PI_PAGE_MASK; - size = min_t(unsigned int, firstfraglen, - PI_PAGE_SIZE - frags[count].pi_off); - - /* can take smallest of firstfraglen (what's left) OR - * bytes left in the page - */ - frags[count].pi_len = size; - firstfraglen -= size; - offset += size; - count++; - } - if (numfrags) { - if ((count + numfrags) > frags_max) - return -EINVAL; - - for (frag = 0; frag < numfrags; frag++) { - count = add_physinfo_entries(page_to_pfn( - skb_frag_page(&skb_shinfo(skb)->frags[frag])), - skb_frag_off(&skb_shinfo(skb)->frags[frag]), - skb_frag_size(&skb_shinfo(skb)->frags[frag]), - count, frags_max, frags); - /* add_physinfo_entries only returns - * zero if the frags array is out of room - * That should never happen because we - * fail above, if count+numfrags > frags_max. - */ - if (!count) - return -EINVAL; - } - } - if (skb_shinfo(skb)->frag_list) { - struct sk_buff *skbinlist; - int c; - - for (skbinlist = skb_shinfo(skb)->frag_list; skbinlist; - skbinlist = skbinlist->next) { - c = visor_copy_fragsinfo_from_skb(skbinlist, - skbinlist->len - - skbinlist->data_len, - frags_max - count, - &frags[count]); - if (c < 0) - return c; - count += c; - } - } - return count; -} - -static ssize_t enable_ints_write(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - /* Don't want to break ABI here by having a debugfs - * file that no longer exists or is writable, so - * lets just make this a vestigual function - */ - return count; -} - -static const struct file_operations debugfs_enable_ints_fops = { - .write = enable_ints_write, -}; - -/* visornic_serverdown_complete - pause device following IOPART going down - * @devdata: Device managed by IOPART. - * - * The IO partition has gone down, and we need to do some cleanup for when it - * comes back. Treat the IO partition as the link being down. - */ -static void visornic_serverdown_complete(struct visornic_devdata *devdata) -{ - struct net_device *netdev = devdata->netdev; - - /* Stop polling for interrupts */ - visorbus_disable_channel_interrupts(devdata->dev); - - rtnl_lock(); - dev_close(netdev); - rtnl_unlock(); - - atomic_set(&devdata->num_rcvbuf_in_iovm, 0); - devdata->chstat.sent_xmit = 0; - devdata->chstat.got_xmit_done = 0; - - if (devdata->server_down_complete_func) - (*devdata->server_down_complete_func)(devdata->dev, 0); - - devdata->server_down = true; - devdata->server_change_state = false; - devdata->server_down_complete_func = NULL; -} - -/* visornic_serverdown - Command has notified us that IOPART is down - * @devdata: Device managed by IOPART. - * @complete_func: Function to call when finished. - * - * Schedule the work needed to handle the server down request. Make sure we - * haven't already handled the server change state event. - * - * Return: 0 if we scheduled the work, negative integer on error. - */ -static int visornic_serverdown(struct visornic_devdata *devdata, - visorbus_state_complete_func complete_func) -{ - unsigned long flags; - int err; - - spin_lock_irqsave(&devdata->priv_lock, flags); - if (devdata->server_change_state) { - dev_dbg(&devdata->dev->device, "%s changing state\n", - __func__); - err = -EINVAL; - goto err_unlock; - } - if (devdata->server_down) { - dev_dbg(&devdata->dev->device, "%s already down\n", - __func__); - err = -EINVAL; - goto err_unlock; - } - if (devdata->going_away) { - dev_dbg(&devdata->dev->device, - "%s aborting because device removal pending\n", - __func__); - err = -ENODEV; - goto err_unlock; - } - devdata->server_change_state = true; - devdata->server_down_complete_func = complete_func; - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - visornic_serverdown_complete(devdata); - return 0; - -err_unlock: - spin_unlock_irqrestore(&devdata->priv_lock, flags); - return err; -} - -/* alloc_rcv_buf - alloc rcv buffer to be given to the IO Partition - * @netdev: Network adapter the rcv bufs are attached too. - * - * Create an sk_buff (rcv_buf) that will be passed to the IO Partition - * so that it can write rcv data into our memory space. - * - * Return: Pointer to sk_buff. - */ -static struct sk_buff *alloc_rcv_buf(struct net_device *netdev) -{ - struct sk_buff *skb; - - /* NOTE: the first fragment in each rcv buffer is pointed to by - * rcvskb->data. For now all rcv buffers will be RCVPOST_BUF_SIZE - * in length, so the first frag is large enough to hold 1514. - */ - skb = alloc_skb(RCVPOST_BUF_SIZE, GFP_ATOMIC); - if (!skb) - return NULL; - skb->dev = netdev; - /* current value of mtu doesn't come into play here; large - * packets will just end up using multiple rcv buffers all of - * same size. - */ - skb->len = RCVPOST_BUF_SIZE; - /* alloc_skb already zeroes it out for clarification. */ - skb->data_len = 0; - return skb; -} - -/* post_skb - post a skb to the IO Partition - * @cmdrsp: Cmdrsp packet to be send to the IO Partition. - * @devdata: visornic_devdata to post the skb to. - * @skb: Skb to give to the IO partition. - * - * Return: 0 on success, negative integer on error. - */ -static int post_skb(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata, - struct sk_buff *skb) -{ - int err; - - cmdrsp->net.buf = skb; - cmdrsp->net.rcvpost.frag.pi_pfn = page_to_pfn(virt_to_page(skb->data)); - cmdrsp->net.rcvpost.frag.pi_off = - (unsigned long)skb->data & PI_PAGE_MASK; - cmdrsp->net.rcvpost.frag.pi_len = skb->len; - cmdrsp->net.rcvpost.unique_num = devdata->incarnation_id; - - if ((cmdrsp->net.rcvpost.frag.pi_off + skb->len) > PI_PAGE_SIZE) - return -EINVAL; - - cmdrsp->net.type = NET_RCV_POST; - cmdrsp->cmdtype = CMD_NET_TYPE; - err = visorchannel_signalinsert(devdata->dev->visorchannel, - IOCHAN_TO_IOPART, - cmdrsp); - if (err) { - devdata->chstat.sent_post_failed++; - return err; - } - - atomic_inc(&devdata->num_rcvbuf_in_iovm); - devdata->chstat.sent_post++; - return 0; -} - -/* send_enbdis - Send NET_RCV_ENBDIS to IO Partition - * @netdev: Netdevice we are enabling/disabling, used as context return value. - * @state: Enable = 1/disable = 0. - * @devdata: Visornic device we are enabling/disabling. - * - * Send the enable/disable message to the IO Partition. - * - * Return: 0 on success, negative integer on error. - */ -static int send_enbdis(struct net_device *netdev, int state, - struct visornic_devdata *devdata) -{ - int err; - - devdata->cmdrsp_rcv->net.enbdis.enable = state; - devdata->cmdrsp_rcv->net.enbdis.context = netdev; - devdata->cmdrsp_rcv->net.type = NET_RCV_ENBDIS; - devdata->cmdrsp_rcv->cmdtype = CMD_NET_TYPE; - err = visorchannel_signalinsert(devdata->dev->visorchannel, - IOCHAN_TO_IOPART, - devdata->cmdrsp_rcv); - if (err) - return err; - devdata->chstat.sent_enbdis++; - return 0; -} - -/* visornic_disable_with_timeout - disable network adapter - * @netdev: netdevice to disable. - * @timeout: Timeout to wait for disable. - * - * Disable the network adapter and inform the IO Partition that we are disabled. - * Reclaim memory from rcv bufs. - * - * Return: 0 on success, negative integer on failure of IO Partition responding. - */ -static int visornic_disable_with_timeout(struct net_device *netdev, - const int timeout) -{ - struct visornic_devdata *devdata = netdev_priv(netdev); - int i; - unsigned long flags; - int wait = 0; - int err; - - /* send a msg telling the other end we are stopping incoming pkts */ - spin_lock_irqsave(&devdata->priv_lock, flags); - devdata->enabled = 0; - /* must wait for ack */ - devdata->enab_dis_acked = 0; - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - /* send disable and wait for ack -- don't hold lock when sending - * disable because if the queue is full, insert might sleep. - * If an error occurs, don't wait for the timeout. - */ - err = send_enbdis(netdev, 0, devdata); - if (err) - return err; - - /* wait for ack to arrive before we try to free rcv buffers - * NOTE: the other end automatically unposts the rcv buffers - * when it gets a disable. - */ - spin_lock_irqsave(&devdata->priv_lock, flags); - while ((timeout == VISORNIC_INFINITE_RSP_WAIT) || - (wait < timeout)) { - if (devdata->enab_dis_acked) - break; - if (devdata->server_down || devdata->server_change_state) { - dev_dbg(&netdev->dev, "%s server went away\n", - __func__); - break; - } - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - wait += schedule_timeout(msecs_to_jiffies(10)); - spin_lock_irqsave(&devdata->priv_lock, flags); - } - - /* Wait for usage to go to 1 (no other users) before freeing - * rcv buffers - */ - if (atomic_read(&devdata->usage) > 1) { - while (1) { - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - schedule_timeout(msecs_to_jiffies(10)); - spin_lock_irqsave(&devdata->priv_lock, flags); - if (atomic_read(&devdata->usage)) - break; - } - } - /* we've set enabled to 0, so we can give up the lock. */ - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - /* stop the transmit queue so nothing more can be transmitted */ - netif_stop_queue(netdev); - - napi_disable(&devdata->napi); - - skb_queue_purge(&devdata->xmitbufhead); - - /* Free rcv buffers - other end has automatically unposed them on - * disable - */ - for (i = 0; i < devdata->num_rcv_bufs; i++) { - if (devdata->rcvbuf[i]) { - kfree_skb(devdata->rcvbuf[i]); - devdata->rcvbuf[i] = NULL; - } - } - - return 0; -} - -/* init_rcv_bufs - initialize receive buffs and send them to the IO Partition - * @netdev: struct netdevice. - * @devdata: visornic_devdata. - * - * Allocate rcv buffers and post them to the IO Partition. - * - * Return: 0 on success, negative integer on failure. - */ -static int init_rcv_bufs(struct net_device *netdev, - struct visornic_devdata *devdata) -{ - int i, j, count, err; - - /* allocate fixed number of receive buffers to post to uisnic - * post receive buffers after we've allocated a required amount - */ - for (i = 0; i < devdata->num_rcv_bufs; i++) { - devdata->rcvbuf[i] = alloc_rcv_buf(netdev); - /* if we failed to allocate one let us stop */ - if (!devdata->rcvbuf[i]) - break; - } - /* couldn't even allocate one -- bail out */ - if (i == 0) - return -ENOMEM; - count = i; - - /* Ensure we can alloc 2/3rd of the requested number of buffers. - * 2/3 is an arbitrary choice; used also in ndis init.c - */ - if (count < ((2 * devdata->num_rcv_bufs) / 3)) { - /* free receive buffers we did alloc and then bail out */ - for (i = 0; i < count; i++) { - kfree_skb(devdata->rcvbuf[i]); - devdata->rcvbuf[i] = NULL; - } - return -ENOMEM; - } - - /* post receive buffers to receive incoming input - without holding - * lock - we've not enabled nor started the queue so there shouldn't - * be any rcv or xmit activity - */ - for (i = 0; i < count; i++) { - err = post_skb(devdata->cmdrsp_rcv, devdata, - devdata->rcvbuf[i]); - if (!err) - continue; - - /* Error handling - - * If we posted at least one skb, we should return success, - * but need to free the resources that we have not successfully - * posted. - */ - for (j = i; j < count; j++) { - kfree_skb(devdata->rcvbuf[j]); - devdata->rcvbuf[j] = NULL; - } - if (i == 0) - return err; - break; - } - - return 0; -} - -/* visornic_enable_with_timeout - send enable to IO Partition - * @netdev: struct net_device. - * @timeout: Time to wait for the ACK from the enable. - * - * Sends enable to IOVM and inits, and posts receive buffers to IOVM. Timeout is - * defined in msecs (timeout of 0 specifies infinite wait). - * - * Return: 0 on success, negative integer on failure. - */ -static int visornic_enable_with_timeout(struct net_device *netdev, - const int timeout) -{ - int err = 0; - struct visornic_devdata *devdata = netdev_priv(netdev); - unsigned long flags; - int wait = 0; - - napi_enable(&devdata->napi); - - /* NOTE: the other end automatically unposts the rcv buffers when it - * gets a disable. - */ - err = init_rcv_bufs(netdev, devdata); - if (err < 0) { - dev_err(&netdev->dev, - "%s failed to init rcv bufs\n", __func__); - return err; - } - - spin_lock_irqsave(&devdata->priv_lock, flags); - devdata->enabled = 1; - devdata->enab_dis_acked = 0; - - /* now we're ready, let's send an ENB to uisnic but until we get - * an ACK back from uisnic, we'll drop the packets - */ - devdata->n_rcv_packets_not_accepted = 0; - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - /* send enable and wait for ack -- don't hold lock when sending enable - * because if the queue is full, insert might sleep. If an error - * occurs error out. - */ - err = send_enbdis(netdev, 1, devdata); - if (err) - return err; - - spin_lock_irqsave(&devdata->priv_lock, flags); - while ((timeout == VISORNIC_INFINITE_RSP_WAIT) || - (wait < timeout)) { - if (devdata->enab_dis_acked) - break; - if (devdata->server_down || devdata->server_change_state) { - dev_dbg(&netdev->dev, "%s server went away\n", - __func__); - break; - } - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - wait += schedule_timeout(msecs_to_jiffies(10)); - spin_lock_irqsave(&devdata->priv_lock, flags); - } - - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - if (!devdata->enab_dis_acked) { - dev_err(&netdev->dev, "%s missing ACK\n", __func__); - return -EIO; - } - - netif_start_queue(netdev); - return 0; -} - -/* visornic_timeout_reset - handle xmit timeout resets - * @work: Work item that scheduled the work. - * - * Transmit timeouts are typically handled by resetting the device for our - * virtual NIC; we will send a disable and enable to the IOVM. If it doesn't - * respond, we will trigger a serverdown. - */ -static void visornic_timeout_reset(struct work_struct *work) -{ - struct visornic_devdata *devdata; - struct net_device *netdev; - int response = 0; - - devdata = container_of(work, struct visornic_devdata, timeout_reset); - netdev = devdata->netdev; - - rtnl_lock(); - if (!netif_running(netdev)) { - rtnl_unlock(); - return; - } - - response = visornic_disable_with_timeout(netdev, - VISORNIC_INFINITE_RSP_WAIT); - if (response) - goto call_serverdown; - - response = visornic_enable_with_timeout(netdev, - VISORNIC_INFINITE_RSP_WAIT); - if (response) - goto call_serverdown; - - rtnl_unlock(); - - return; - -call_serverdown: - visornic_serverdown(devdata, NULL); - rtnl_unlock(); -} - -/* visornic_open - enable the visornic device and mark the queue started - * @netdev: netdevice to start. - * - * Enable the device and start the transmit queue. - * - * Return: 0 on success. - */ -static int visornic_open(struct net_device *netdev) -{ - visornic_enable_with_timeout(netdev, VISORNIC_INFINITE_RSP_WAIT); - return 0; -} - -/* visornic_close - disables the visornic device and stops the queues - * @netdev: netdevice to stop. - * - * Disable the device and stop the transmit queue. - * - * Return 0 on success. - */ -static int visornic_close(struct net_device *netdev) -{ - visornic_disable_with_timeout(netdev, VISORNIC_INFINITE_RSP_WAIT); - return 0; -} - -/* devdata_xmits_outstanding - compute outstanding xmits - * @devdata: visornic_devdata for device - * - * Return: Long integer representing the number of outstanding xmits. - */ -static unsigned long devdata_xmits_outstanding(struct visornic_devdata *devdata) -{ - if (devdata->chstat.sent_xmit >= devdata->chstat.got_xmit_done) - return devdata->chstat.sent_xmit - - devdata->chstat.got_xmit_done; - return (ULONG_MAX - devdata->chstat.got_xmit_done - + devdata->chstat.sent_xmit + 1); -} - -/* vnic_hit_high_watermark - * @devdata: Indicates visornic device we are checking. - * @high_watermark: Max num of unacked xmits we will tolerate before we will - * start throttling. - * - * Return: True iff the number of unacked xmits sent to the IO Partition is >= - * high_watermark. False otherwise. - */ -static bool vnic_hit_high_watermark(struct visornic_devdata *devdata, - ulong high_watermark) -{ - return (devdata_xmits_outstanding(devdata) >= high_watermark); -} - -/* vnic_hit_low_watermark - * @devdata: Indicates visornic device we are checking. - * @low_watermark: We will wait until the num of unacked xmits drops to this - * value or lower before we start transmitting again. - * - * Return: True iff the number of unacked xmits sent to the IO Partition is <= - * low_watermark. - */ -static bool vnic_hit_low_watermark(struct visornic_devdata *devdata, - ulong low_watermark) -{ - return (devdata_xmits_outstanding(devdata) <= low_watermark); -} - -/* visornic_xmit - send a packet to the IO Partition - * @skb: Packet to be sent. - * @netdev: Net device the packet is being sent from. - * - * Convert the skb to a cmdrsp so the IO Partition can understand it, and send - * the XMIT command to the IO Partition for processing. This function is - * protected from concurrent calls by a spinlock xmit_lock in the net_device - * struct. As soon as the function returns, it can be called again. - * - * Return: NETDEV_TX_OK. - */ -static netdev_tx_t visornic_xmit(struct sk_buff *skb, struct net_device *netdev) -{ - struct visornic_devdata *devdata; - int len, firstfraglen, padlen; - struct uiscmdrsp *cmdrsp = NULL; - unsigned long flags; - int err; - - devdata = netdev_priv(netdev); - spin_lock_irqsave(&devdata->priv_lock, flags); - - if (netif_queue_stopped(netdev) || devdata->server_down || - devdata->server_change_state) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - devdata->busy_cnt++; - dev_dbg(&netdev->dev, - "%s busy - queue stopped\n", __func__); - kfree_skb(skb); - return NETDEV_TX_OK; - } - - /* sk_buff struct is used to host network data throughout all the - * linux network subsystems - */ - len = skb->len; - - /* skb->len is the FULL length of data (including fragmentary portion) - * skb->data_len is the length of the fragment portion in frags - * skb->len - skb->data_len is size of the 1st fragment in skb->data - * calculate the length of the first fragment that skb->data is - * pointing to - */ - firstfraglen = skb->len - skb->data_len; - if (firstfraglen < ETH_HLEN) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - devdata->busy_cnt++; - dev_err(&netdev->dev, - "%s busy - first frag too small (%d)\n", - __func__, firstfraglen); - kfree_skb(skb); - return NETDEV_TX_OK; - } - - if (len < ETH_MIN_PACKET_SIZE && - ((skb_end_pointer(skb) - skb->data) >= ETH_MIN_PACKET_SIZE)) { - /* pad the packet out to minimum size */ - padlen = ETH_MIN_PACKET_SIZE - len; - skb_put_zero(skb, padlen); - len += padlen; - firstfraglen += padlen; - } - - cmdrsp = devdata->xmit_cmdrsp; - /* clear cmdrsp */ - memset(cmdrsp, 0, SIZEOF_CMDRSP); - cmdrsp->net.type = NET_XMIT; - cmdrsp->cmdtype = CMD_NET_TYPE; - - /* save the pointer to skb -- we'll need it for completion */ - cmdrsp->net.buf = skb; - - if (vnic_hit_high_watermark(devdata, - devdata->max_outstanding_net_xmits)) { - /* extra NET_XMITs queued over to IOVM - need to wait */ - devdata->chstat.reject_count++; - if (!devdata->queuefullmsg_logged && - ((devdata->chstat.reject_count & 0x3ff) == 1)) - devdata->queuefullmsg_logged = 1; - netif_stop_queue(netdev); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - devdata->busy_cnt++; - dev_dbg(&netdev->dev, - "%s busy - waiting for iovm to catch up\n", - __func__); - kfree_skb(skb); - return NETDEV_TX_OK; - } - if (devdata->queuefullmsg_logged) - devdata->queuefullmsg_logged = 0; - - if (skb->ip_summed == CHECKSUM_UNNECESSARY) { - cmdrsp->net.xmt.lincsum.valid = 1; - cmdrsp->net.xmt.lincsum.protocol = skb->protocol; - if (skb_transport_header(skb) > skb->data) { - cmdrsp->net.xmt.lincsum.hrawoff = - skb_transport_header(skb) - skb->data; - cmdrsp->net.xmt.lincsum.hrawoff = 1; - } - if (skb_network_header(skb) > skb->data) { - cmdrsp->net.xmt.lincsum.nhrawoff = - skb_network_header(skb) - skb->data; - cmdrsp->net.xmt.lincsum.nhrawoffv = 1; - } - cmdrsp->net.xmt.lincsum.csum = skb->csum; - } else { - cmdrsp->net.xmt.lincsum.valid = 0; - } - - /* save off the length of the entire data packet */ - cmdrsp->net.xmt.len = len; - - /* copy ethernet header from first frag into ocmdrsp - * - everything else will be pass in frags & DMA'ed - */ - memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HLEN); - - /* copy frags info - from skb->data we need to only provide access - * beyond eth header - */ - cmdrsp->net.xmt.num_frags = - visor_copy_fragsinfo_from_skb(skb, firstfraglen, - MAX_PHYS_INFO, - cmdrsp->net.xmt.frags); - if (cmdrsp->net.xmt.num_frags < 0) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - devdata->busy_cnt++; - dev_err(&netdev->dev, - "%s busy - copy frags failed\n", __func__); - kfree_skb(skb); - return NETDEV_TX_OK; - } - - err = visorchannel_signalinsert(devdata->dev->visorchannel, - IOCHAN_TO_IOPART, cmdrsp); - if (err) { - netif_stop_queue(netdev); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - devdata->busy_cnt++; - dev_dbg(&netdev->dev, - "%s busy - signalinsert failed\n", __func__); - kfree_skb(skb); - return NETDEV_TX_OK; - } - - /* Track the skbs that have been sent to the IOVM for XMIT */ - skb_queue_head(&devdata->xmitbufhead, skb); - - /* update xmt stats */ - devdata->net_stats.tx_packets++; - devdata->net_stats.tx_bytes += skb->len; - devdata->chstat.sent_xmit++; - - /* check if we have hit the high watermark for netif_stop_queue() */ - if (vnic_hit_high_watermark(devdata, - devdata->upper_threshold_net_xmits)) { - /* extra NET_XMITs queued over to IOVM - need to wait */ - /* stop queue - call netif_wake_queue() after lower threshold */ - netif_stop_queue(netdev); - dev_dbg(&netdev->dev, - "%s busy - invoking iovm flow control\n", - __func__); - devdata->flow_control_upper_hits++; - } - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - /* skb will be freed when we get back NET_XMIT_DONE */ - return NETDEV_TX_OK; -} - -/* visornic_get_stats - returns net_stats of the visornic device - * @netdev: netdevice. - * - * Return: Pointer to the net_device_stats struct for the device. - */ -static struct net_device_stats *visornic_get_stats(struct net_device *netdev) -{ - struct visornic_devdata *devdata = netdev_priv(netdev); - - return &devdata->net_stats; -} - -/* visornic_change_mtu - changes mtu of device - * @netdev: netdevice. - * @new_mtu: Value of new mtu. - * - * The device's MTU cannot be changed by system; it must be changed via a - * CONTROLVM message. All vnics and pnics in a switch have to have the same MTU - * for everything to work. Currently not supported. - * - * Return: -EINVAL. - */ -static int visornic_change_mtu(struct net_device *netdev, int new_mtu) -{ - return -EINVAL; -} - -/* visornic_set_multi - set visornic device flags - * @netdev: netdevice. - * - * The only flag we currently support is IFF_PROMISC. - */ -static void visornic_set_multi(struct net_device *netdev) -{ - struct uiscmdrsp *cmdrsp; - struct visornic_devdata *devdata = netdev_priv(netdev); - int err = 0; - - if (devdata->old_flags == netdev->flags) - return; - - if ((netdev->flags & IFF_PROMISC) == - (devdata->old_flags & IFF_PROMISC)) - goto out_save_flags; - - cmdrsp = kmalloc(SIZEOF_CMDRSP, GFP_ATOMIC); - if (!cmdrsp) - return; - cmdrsp->cmdtype = CMD_NET_TYPE; - cmdrsp->net.type = NET_RCV_PROMISC; - cmdrsp->net.enbdis.context = netdev; - cmdrsp->net.enbdis.enable = - netdev->flags & IFF_PROMISC; - err = visorchannel_signalinsert(devdata->dev->visorchannel, - IOCHAN_TO_IOPART, - cmdrsp); - kfree(cmdrsp); - if (err) - return; - -out_save_flags: - devdata->old_flags = netdev->flags; -} - -/* visornic_xmit_timeout - request to timeout the xmit - * @netdev: netdevice. - * - * Queue the work and return. Make sure we have not already been informed that - * the IO Partition is gone; if so, we will have already timed-out the xmits. - */ -static void visornic_xmit_timeout(struct net_device *netdev, unsigned int txqueue) -{ - struct visornic_devdata *devdata = netdev_priv(netdev); - unsigned long flags; - - spin_lock_irqsave(&devdata->priv_lock, flags); - if (devdata->going_away) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - dev_dbg(&devdata->dev->device, - "%s aborting because device removal pending\n", - __func__); - return; - } - - /* Ensure that a ServerDown message hasn't been received */ - if (!devdata->enabled || - (devdata->server_down && !devdata->server_change_state)) { - dev_dbg(&netdev->dev, "%s no processing\n", - __func__); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - return; - } - schedule_work(&devdata->timeout_reset); - spin_unlock_irqrestore(&devdata->priv_lock, flags); -} - -/* repost_return - repost rcv bufs that have come back - * @cmdrsp: IO channel command struct to post. - * @devdata: Visornic devdata for the device. - * @skb: Socket buffer. - * @netdev: netdevice. - * - * Repost rcv buffers that have been returned to us when we are finished - * with them. - * - * Return: 0 for success, negative integer on error. - */ -static int repost_return(struct uiscmdrsp *cmdrsp, - struct visornic_devdata *devdata, - struct sk_buff *skb, struct net_device *netdev) -{ - struct net_pkt_rcv copy; - int i = 0, cc, numreposted; - int found_skb = 0; - int status = 0; - - copy = cmdrsp->net.rcv; - switch (copy.numrcvbufs) { - case 0: - devdata->n_rcv0++; - break; - case 1: - devdata->n_rcv1++; - break; - case 2: - devdata->n_rcv2++; - break; - default: - devdata->n_rcvx++; - break; - } - for (cc = 0, numreposted = 0; cc < copy.numrcvbufs; cc++) { - for (i = 0; i < devdata->num_rcv_bufs; i++) { - if (devdata->rcvbuf[i] != copy.rcvbuf[cc]) - continue; - - if ((skb) && devdata->rcvbuf[i] == skb) { - devdata->found_repost_rcvbuf_cnt++; - found_skb = 1; - devdata->repost_found_skb_cnt++; - } - devdata->rcvbuf[i] = alloc_rcv_buf(netdev); - if (!devdata->rcvbuf[i]) { - devdata->num_rcv_bufs_could_not_alloc++; - devdata->alloc_failed_in_repost_rtn_cnt++; - status = -ENOMEM; - break; - } - status = post_skb(cmdrsp, devdata, devdata->rcvbuf[i]); - if (status) { - kfree_skb(devdata->rcvbuf[i]); - devdata->rcvbuf[i] = NULL; - break; - } - numreposted++; - break; - } - } - if (numreposted != copy.numrcvbufs) { - devdata->n_repost_deficit++; - status = -EINVAL; - } - if (skb) { - if (found_skb) { - kfree_skb(skb); - } else { - status = -EINVAL; - devdata->bad_rcv_buf++; - } - } - return status; -} - -/* visornic_rx - handle receive packets coming back from IO Partition - * @cmdrsp: Receive packet returned from IO Partition. - * - * Got a receive packet back from the IO Partition; handle it and send it up - * the stack. - - * Return: 1 iff an skb was received, otherwise 0. - */ -static int visornic_rx(struct uiscmdrsp *cmdrsp) -{ - struct visornic_devdata *devdata; - struct sk_buff *skb, *prev, *curr; - struct net_device *netdev; - int cc, currsize, off; - struct ethhdr *eth; - unsigned long flags; - - /* post new rcv buf to the other end using the cmdrsp we have at hand - * post it without holding lock - but we'll use the signal lock to - * synchronize the queue insert the cmdrsp that contains the net.rcv - * is the one we are using to repost, so copy the info we need from it. - */ - skb = cmdrsp->net.buf; - netdev = skb->dev; - - devdata = netdev_priv(netdev); - - spin_lock_irqsave(&devdata->priv_lock, flags); - atomic_dec(&devdata->num_rcvbuf_in_iovm); - - /* set length to how much was ACTUALLY received - - * NOTE: rcv_done_len includes actual length of data rcvd - * including ethhdr - */ - skb->len = cmdrsp->net.rcv.rcv_done_len; - - /* update rcv stats - call it with priv_lock held */ - devdata->net_stats.rx_packets++; - devdata->net_stats.rx_bytes += skb->len; - - /* test enabled while holding lock */ - if (!(devdata->enabled && devdata->enab_dis_acked)) { - /* don't process it unless we're in enable mode and until - * we've gotten an ACK saying the other end got our RCV enable - */ - spin_unlock_irqrestore(&devdata->priv_lock, flags); - repost_return(cmdrsp, devdata, skb, netdev); - return 0; - } - - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - /* when skb was allocated, skb->dev, skb->data, skb->len and - * skb->data_len were setup. AND, data has already put into the - * skb (both first frag and in frags pages) - * NOTE: firstfragslen is the amount of data in skb->data and that - * which is not in nr_frags or frag_list. This is now simply - * RCVPOST_BUF_SIZE. bump tail to show how much data is in - * firstfrag & set data_len to show rest see if we have to chain - * frag_list. - */ - /* do PRECAUTIONARY check */ - if (skb->len > RCVPOST_BUF_SIZE) { - if (cmdrsp->net.rcv.numrcvbufs < 2) { - if (repost_return(cmdrsp, devdata, skb, netdev) < 0) - dev_err(&devdata->netdev->dev, - "repost_return failed"); - return 0; - } - /* length rcvd is greater than firstfrag in this skb rcv buf */ - /* amount in skb->data */ - skb->tail += RCVPOST_BUF_SIZE; - /* amount that will be in frag_list */ - skb->data_len = skb->len - RCVPOST_BUF_SIZE; - } else { - /* data fits in this skb - no chaining - do - * PRECAUTIONARY check - */ - /* should be 1 */ - if (cmdrsp->net.rcv.numrcvbufs != 1) { - if (repost_return(cmdrsp, devdata, skb, netdev) < 0) - dev_err(&devdata->netdev->dev, - "repost_return failed"); - return 0; - } - skb->tail += skb->len; - /* nothing rcvd in frag_list */ - skb->data_len = 0; - } - off = skb_tail_pointer(skb) - skb->data; - - /* amount we bumped tail by in the head skb - * it is used to calculate the size of each chained skb below - * it is also used to index into bufline to continue the copy - * (for chansocktwopc) - * if necessary chain the rcv skbs together. - * NOTE: index 0 has the same as cmdrsp->net.rcv.skb; we need to - * chain the rest to that one. - * - do PRECAUTIONARY check - */ - if (cmdrsp->net.rcv.rcvbuf[0] != skb) { - if (repost_return(cmdrsp, devdata, skb, netdev) < 0) - dev_err(&devdata->netdev->dev, "repost_return failed"); - return 0; - } - - if (cmdrsp->net.rcv.numrcvbufs > 1) { - /* chain the various rcv buffers into the skb's frag_list. */ - /* Note: off was initialized above */ - for (cc = 1, prev = NULL; - cc < cmdrsp->net.rcv.numrcvbufs; cc++) { - curr = (struct sk_buff *)cmdrsp->net.rcv.rcvbuf[cc]; - curr->next = NULL; - /* start of list- set head */ - if (!prev) - skb_shinfo(skb)->frag_list = curr; - else - prev->next = curr; - prev = curr; - - /* should we set skb->len and skb->data_len for each - * buffer being chained??? can't hurt! - */ - currsize = min(skb->len - off, - (unsigned int)RCVPOST_BUF_SIZE); - curr->len = currsize; - curr->tail += currsize; - curr->data_len = 0; - off += currsize; - } - /* assert skb->len == off */ - if (skb->len != off) { - netdev_err(devdata->netdev, - "something wrong; skb->len:%d != off:%d\n", - skb->len, off); - } - } - - /* set up packet's protocol type using ethernet header - this - * sets up skb->pkt_type & it also PULLS out the eth header - */ - skb->protocol = eth_type_trans(skb, netdev); - eth = eth_hdr(skb); - skb->csum = 0; - skb->ip_summed = CHECKSUM_NONE; - - do { - /* accept all packets */ - if (netdev->flags & IFF_PROMISC) - break; - if (skb->pkt_type == PACKET_BROADCAST) { - /* accept all broadcast packets */ - if (netdev->flags & IFF_BROADCAST) - break; - } else if (skb->pkt_type == PACKET_MULTICAST) { - if ((netdev->flags & IFF_MULTICAST) && - (netdev_mc_count(netdev))) { - struct netdev_hw_addr *ha; - int found_mc = 0; - - /* only accept multicast packets that we can - * find in our multicast address list - */ - netdev_for_each_mc_addr(ha, netdev) { - if (ether_addr_equal(eth->h_dest, - ha->addr)) { - found_mc = 1; - break; - } - } - /* accept pkt, dest matches a multicast addr */ - if (found_mc) - break; - } - /* accept packet, h_dest must match vnic mac address */ - } else if (skb->pkt_type == PACKET_HOST) { - break; - } else if (skb->pkt_type == PACKET_OTHERHOST) { - /* something is not right */ - dev_err(&devdata->netdev->dev, - "**** FAILED to deliver rcv packet to OS; name:%s Dest:%pM VNIC:%pM\n", - netdev->name, eth->h_dest, netdev->dev_addr); - } - /* drop packet - don't forward it up to OS */ - devdata->n_rcv_packets_not_accepted++; - repost_return(cmdrsp, devdata, skb, netdev); - return 0; - } while (0); - - netif_receive_skb(skb); - /* netif_rx returns various values, but "in practice most drivers - * ignore the return value - */ - - skb = NULL; - /* whether the packet got dropped or handled, the skb is freed by - * kernel code, so we shouldn't free it. but we should repost a - * new rcv buffer. - */ - repost_return(cmdrsp, devdata, skb, netdev); - return 1; -} - -/* devdata_initialize - initialize devdata structure - * @devdata: visornic_devdata structure to initialize. - * @dev: visorbus_device it belongs to. - * - * Setup initial values for the visornic, based on channel and default values. - * - * Return: A pointer to the devdata structure. - */ -static struct visornic_devdata *devdata_initialize( - struct visornic_devdata *devdata, - struct visor_device *dev) -{ - devdata->dev = dev; - devdata->incarnation_id = get_jiffies_64(); - return devdata; -} - -/* devdata_release - free up references in devdata - * @devdata: Struct to clean up. - */ -static void devdata_release(struct visornic_devdata *devdata) -{ - kfree(devdata->rcvbuf); - kfree(devdata->cmdrsp_rcv); - kfree(devdata->xmit_cmdrsp); -} - -static const struct net_device_ops visornic_dev_ops = { - .ndo_open = visornic_open, - .ndo_stop = visornic_close, - .ndo_start_xmit = visornic_xmit, - .ndo_get_stats = visornic_get_stats, - .ndo_change_mtu = visornic_change_mtu, - .ndo_tx_timeout = visornic_xmit_timeout, - .ndo_set_rx_mode = visornic_set_multi, -}; - -/* DebugFS code */ -static ssize_t info_debugfs_read(struct file *file, char __user *buf, - size_t len, loff_t *offset) -{ - ssize_t bytes_read = 0; - int str_pos = 0; - struct visornic_devdata *devdata; - struct net_device *dev; - char *vbuf; - - if (len > MAX_BUF) - len = MAX_BUF; - vbuf = kzalloc(len, GFP_KERNEL); - if (!vbuf) - return -ENOMEM; - - /* for each vnic channel dump out channel specific data */ - rcu_read_lock(); - for_each_netdev_rcu(current->nsproxy->net_ns, dev) { - /* Only consider netdevs that are visornic, and are open */ - if (dev->netdev_ops != &visornic_dev_ops || - (!netif_queue_stopped(dev))) - continue; - - devdata = netdev_priv(dev); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - "netdev = %s (0x%p), MAC Addr %pM\n", - dev->name, - dev, - dev->dev_addr); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - "VisorNic Dev Info = 0x%p\n", devdata); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " num_rcv_bufs = %d\n", - devdata->num_rcv_bufs); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " max_outstanding_next_xmits = %lu\n", - devdata->max_outstanding_net_xmits); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " upper_threshold_net_xmits = %lu\n", - devdata->upper_threshold_net_xmits); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " lower_threshold_net_xmits = %lu\n", - devdata->lower_threshold_net_xmits); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " queuefullmsg_logged = %d\n", - devdata->queuefullmsg_logged); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.got_rcv = %lu\n", - devdata->chstat.got_rcv); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.got_enbdisack = %lu\n", - devdata->chstat.got_enbdisack); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.got_xmit_done = %lu\n", - devdata->chstat.got_xmit_done); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.xmit_fail = %lu\n", - devdata->chstat.xmit_fail); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.sent_enbdis = %lu\n", - devdata->chstat.sent_enbdis); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.sent_promisc = %lu\n", - devdata->chstat.sent_promisc); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.sent_post = %lu\n", - devdata->chstat.sent_post); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.sent_post_failed = %lu\n", - devdata->chstat.sent_post_failed); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.sent_xmit = %lu\n", - devdata->chstat.sent_xmit); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.reject_count = %lu\n", - devdata->chstat.reject_count); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " chstat.extra_rcvbufs_sent = %lu\n", - devdata->chstat.extra_rcvbufs_sent); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " n_rcv0 = %lu\n", devdata->n_rcv0); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " n_rcv1 = %lu\n", devdata->n_rcv1); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " n_rcv2 = %lu\n", devdata->n_rcv2); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " n_rcvx = %lu\n", devdata->n_rcvx); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " num_rcvbuf_in_iovm = %d\n", - atomic_read(&devdata->num_rcvbuf_in_iovm)); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " alloc_failed_in_if_needed_cnt = %lu\n", - devdata->alloc_failed_in_if_needed_cnt); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " alloc_failed_in_repost_rtn_cnt = %lu\n", - devdata->alloc_failed_in_repost_rtn_cnt); - /* str_pos += scnprintf(vbuf + str_pos, len - str_pos, - * " inner_loop_limit_reached_cnt = %lu\n", - * devdata->inner_loop_limit_reached_cnt); - */ - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " found_repost_rcvbuf_cnt = %lu\n", - devdata->found_repost_rcvbuf_cnt); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " repost_found_skb_cnt = %lu\n", - devdata->repost_found_skb_cnt); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " n_repost_deficit = %lu\n", - devdata->n_repost_deficit); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " bad_rcv_buf = %lu\n", - devdata->bad_rcv_buf); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " n_rcv_packets_not_accepted = %lu\n", - devdata->n_rcv_packets_not_accepted); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " interrupts_rcvd = %llu\n", - devdata->interrupts_rcvd); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " interrupts_notme = %llu\n", - devdata->interrupts_notme); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " interrupts_disabled = %llu\n", - devdata->interrupts_disabled); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " busy_cnt = %llu\n", - devdata->busy_cnt); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " flow_control_upper_hits = %llu\n", - devdata->flow_control_upper_hits); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " flow_control_lower_hits = %llu\n", - devdata->flow_control_lower_hits); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " netif_queue = %s\n", - netif_queue_stopped(devdata->netdev) ? - "stopped" : "running"); - str_pos += scnprintf(vbuf + str_pos, len - str_pos, - " xmits_outstanding = %lu\n", - devdata_xmits_outstanding(devdata)); - } - rcu_read_unlock(); - bytes_read = simple_read_from_buffer(buf, len, offset, vbuf, str_pos); - kfree(vbuf); - return bytes_read; -} - -static struct dentry *visornic_debugfs_dir; -static const struct file_operations debugfs_info_fops = { - .read = info_debugfs_read, -}; - -/* send_rcv_posts_if_needed - send receive buffers to the IO Partition. - * @devdata: Visornic device. - */ -static void send_rcv_posts_if_needed(struct visornic_devdata *devdata) -{ - int i; - struct net_device *netdev; - struct uiscmdrsp *cmdrsp = devdata->cmdrsp_rcv; - int cur_num_rcv_bufs_to_alloc, rcv_bufs_allocated; - int err; - - /* don't do this until vnic is marked ready */ - if (!(devdata->enabled && devdata->enab_dis_acked)) - return; - - netdev = devdata->netdev; - rcv_bufs_allocated = 0; - /* this code is trying to prevent getting stuck here forever, - * but still retry it if you can't allocate them all this time. - */ - cur_num_rcv_bufs_to_alloc = devdata->num_rcv_bufs_could_not_alloc; - while (cur_num_rcv_bufs_to_alloc > 0) { - cur_num_rcv_bufs_to_alloc--; - for (i = 0; i < devdata->num_rcv_bufs; i++) { - if (devdata->rcvbuf[i]) - continue; - devdata->rcvbuf[i] = alloc_rcv_buf(netdev); - if (!devdata->rcvbuf[i]) { - devdata->alloc_failed_in_if_needed_cnt++; - break; - } - rcv_bufs_allocated++; - err = post_skb(cmdrsp, devdata, devdata->rcvbuf[i]); - if (err) { - kfree_skb(devdata->rcvbuf[i]); - devdata->rcvbuf[i] = NULL; - break; - } - devdata->chstat.extra_rcvbufs_sent++; - } - } - devdata->num_rcv_bufs_could_not_alloc -= rcv_bufs_allocated; -} - -/* drain_resp_queue - drains and ignores all messages from the resp queue - * @cmdrsp: IO channel command response message. - * @devdata: Visornic device to drain. - */ -static void drain_resp_queue(struct uiscmdrsp *cmdrsp, - struct visornic_devdata *devdata) -{ - while (!visorchannel_signalremove(devdata->dev->visorchannel, - IOCHAN_FROM_IOPART, - cmdrsp)) - ; -} - -/* service_resp_queue - drain the response queue - * @cmdrsp: IO channel command response message. - * @devdata: Visornic device to drain. - * @rx_work_done: - * @budget: - * - * Drain the response queue of any responses from the IO Partition. Process the - * responses as we get them. - */ -static void service_resp_queue(struct uiscmdrsp *cmdrsp, - struct visornic_devdata *devdata, - int *rx_work_done, int budget) -{ - unsigned long flags; - struct net_device *netdev; - - while (*rx_work_done < budget) { - /* TODO: CLIENT ACQUIRE -- Don't really need this at the - * moment - */ - /* queue empty */ - if (visorchannel_signalremove(devdata->dev->visorchannel, - IOCHAN_FROM_IOPART, - cmdrsp)) - break; - - switch (cmdrsp->net.type) { - case NET_RCV: - devdata->chstat.got_rcv++; - /* process incoming packet */ - *rx_work_done += visornic_rx(cmdrsp); - break; - case NET_XMIT_DONE: - spin_lock_irqsave(&devdata->priv_lock, flags); - devdata->chstat.got_xmit_done++; - if (cmdrsp->net.xmtdone.xmt_done_result) - devdata->chstat.xmit_fail++; - /* only call queue wake if we stopped it */ - netdev = ((struct sk_buff *)cmdrsp->net.buf)->dev; - /* ASSERT netdev == vnicinfo->netdev; */ - if (netdev == devdata->netdev && - netif_queue_stopped(netdev)) { - /* check if we have crossed the lower watermark - * for netif_wake_queue() - */ - if (vnic_hit_low_watermark - (devdata, - devdata->lower_threshold_net_xmits)) { - /* enough NET_XMITs completed - * so can restart netif queue - */ - netif_wake_queue(netdev); - devdata->flow_control_lower_hits++; - } - } - skb_unlink(cmdrsp->net.buf, &devdata->xmitbufhead); - spin_unlock_irqrestore(&devdata->priv_lock, flags); - kfree_skb(cmdrsp->net.buf); - break; - case NET_RCV_ENBDIS_ACK: - devdata->chstat.got_enbdisack++; - netdev = (struct net_device *) - cmdrsp->net.enbdis.context; - spin_lock_irqsave(&devdata->priv_lock, flags); - devdata->enab_dis_acked = 1; - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - if (devdata->server_down && - devdata->server_change_state) { - /* Inform Linux that the link is up */ - devdata->server_down = false; - devdata->server_change_state = false; - netif_wake_queue(netdev); - netif_carrier_on(netdev); - } - break; - case NET_CONNECT_STATUS: - netdev = devdata->netdev; - if (cmdrsp->net.enbdis.enable == 1) { - spin_lock_irqsave(&devdata->priv_lock, flags); - devdata->enabled = cmdrsp->net.enbdis.enable; - spin_unlock_irqrestore(&devdata->priv_lock, - flags); - netif_wake_queue(netdev); - netif_carrier_on(netdev); - } else { - netif_stop_queue(netdev); - netif_carrier_off(netdev); - spin_lock_irqsave(&devdata->priv_lock, flags); - devdata->enabled = cmdrsp->net.enbdis.enable; - spin_unlock_irqrestore(&devdata->priv_lock, - flags); - } - break; - default: - break; - } - /* cmdrsp is now available for reuse */ - } -} - -static int visornic_poll(struct napi_struct *napi, int budget) -{ - struct visornic_devdata *devdata = container_of(napi, - struct visornic_devdata, - napi); - int rx_count = 0; - - send_rcv_posts_if_needed(devdata); - service_resp_queue(devdata->cmdrsp, devdata, &rx_count, budget); - - /* If there aren't any more packets to receive stop the poll */ - if (rx_count < budget) - napi_complete_done(napi, rx_count); - - return rx_count; -} - -/* visornic_channel_interrupt - checks the status of the response queue - * - * Main function of the vnic_incoming thread. Periodically check the response - * queue and drain it if needed. - */ -static void visornic_channel_interrupt(struct visor_device *dev) -{ - struct visornic_devdata *devdata = dev_get_drvdata(&dev->device); - - if (!devdata) - return; - - if (!visorchannel_signalempty(devdata->dev->visorchannel, - IOCHAN_FROM_IOPART)) - napi_schedule(&devdata->napi); - - atomic_set(&devdata->interrupt_rcvd, 0); -} - -/* visornic_probe - probe function for visornic devices - * @dev: The visor device discovered. - * - * Called when visorbus discovers a visornic device on its bus. It creates a new - * visornic ethernet adapter. - * - * Return: 0 on success, or negative integer on error. - */ -static int visornic_probe(struct visor_device *dev) -{ - struct visornic_devdata *devdata = NULL; - struct net_device *netdev = NULL; - int err; - int channel_offset = 0; - u8 addr[ETH_ALEN]; - u64 features; - - netdev = alloc_etherdev(sizeof(struct visornic_devdata)); - if (!netdev) { - dev_err(&dev->device, - "%s alloc_etherdev failed\n", __func__); - return -ENOMEM; - } - - netdev->netdev_ops = &visornic_dev_ops; - netdev->watchdog_timeo = 5 * HZ; - SET_NETDEV_DEV(netdev, &dev->device); - - /* Get MAC address from channel and read it into the device. */ - netdev->addr_len = ETH_ALEN; - channel_offset = offsetof(struct visor_io_channel, vnic.macaddr); - err = visorbus_read_channel(dev, channel_offset, addr, ETH_ALEN); - if (err < 0) { - dev_err(&dev->device, - "%s failed to get mac addr from chan (%d)\n", - __func__, err); - goto cleanup_netdev; - } - eth_hw_addr_set(netdev, addr); - - devdata = devdata_initialize(netdev_priv(netdev), dev); - if (!devdata) { - dev_err(&dev->device, - "%s devdata_initialize failed\n", __func__); - err = -ENOMEM; - goto cleanup_netdev; - } - /* don't trust messages laying around in the channel */ - drain_resp_queue(devdata->cmdrsp, devdata); - - devdata->netdev = netdev; - dev_set_drvdata(&dev->device, devdata); - init_waitqueue_head(&devdata->rsp_queue); - spin_lock_init(&devdata->priv_lock); - /* not yet */ - devdata->enabled = 0; - atomic_set(&devdata->usage, 1); - - /* Setup rcv bufs */ - channel_offset = offsetof(struct visor_io_channel, vnic.num_rcv_bufs); - err = visorbus_read_channel(dev, channel_offset, - &devdata->num_rcv_bufs, 4); - if (err) { - dev_err(&dev->device, - "%s failed to get #rcv bufs from chan (%d)\n", - __func__, err); - goto cleanup_netdev; - } - - devdata->rcvbuf = kcalloc(devdata->num_rcv_bufs, - sizeof(struct sk_buff *), GFP_KERNEL); - if (!devdata->rcvbuf) { - err = -ENOMEM; - goto cleanup_netdev; - } - - /* set the net_xmit outstanding threshold - * always leave two slots open but you should have 3 at a minimum - * note that max_outstanding_net_xmits must be > 0 - */ - devdata->max_outstanding_net_xmits = - max_t(unsigned long, 3, ((devdata->num_rcv_bufs / 3) - 2)); - devdata->upper_threshold_net_xmits = - max_t(unsigned long, - 2, (devdata->max_outstanding_net_xmits - 1)); - devdata->lower_threshold_net_xmits = - max_t(unsigned long, - 1, (devdata->max_outstanding_net_xmits / 2)); - - skb_queue_head_init(&devdata->xmitbufhead); - - /* create a cmdrsp we can use to post and unpost rcv buffers */ - devdata->cmdrsp_rcv = kmalloc(SIZEOF_CMDRSP, GFP_KERNEL); - if (!devdata->cmdrsp_rcv) { - err = -ENOMEM; - goto cleanup_rcvbuf; - } - devdata->xmit_cmdrsp = kmalloc(SIZEOF_CMDRSP, GFP_KERNEL); - if (!devdata->xmit_cmdrsp) { - err = -ENOMEM; - goto cleanup_cmdrsp_rcv; - } - INIT_WORK(&devdata->timeout_reset, visornic_timeout_reset); - devdata->server_down = false; - devdata->server_change_state = false; - - /*set the default mtu */ - channel_offset = offsetof(struct visor_io_channel, vnic.mtu); - err = visorbus_read_channel(dev, channel_offset, &netdev->mtu, 4); - if (err) { - dev_err(&dev->device, - "%s failed to get mtu from chan (%d)\n", - __func__, err); - goto cleanup_xmit_cmdrsp; - } - - /* TODO: Setup Interrupt information */ - /* Let's start our threads to get responses */ - netif_napi_add(netdev, &devdata->napi, visornic_poll, NAPI_WEIGHT); - - channel_offset = offsetof(struct visor_io_channel, - channel_header.features); - err = visorbus_read_channel(dev, channel_offset, &features, 8); - if (err) { - dev_err(&dev->device, - "%s failed to get features from chan (%d)\n", - __func__, err); - goto cleanup_napi_add; - } - - features |= VISOR_CHANNEL_IS_POLLING; - features |= VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING; - err = visorbus_write_channel(dev, channel_offset, &features, 8); - if (err) { - dev_err(&dev->device, - "%s failed to set features in chan (%d)\n", - __func__, err); - goto cleanup_napi_add; - } - - /* Note: Interrupts have to be enable before the while - * loop below because the napi routine is responsible for - * setting enab_dis_acked - */ - visorbus_enable_channel_interrupts(dev); - - err = register_netdev(netdev); - if (err) { - dev_err(&dev->device, - "%s register_netdev failed (%d)\n", __func__, err); - goto cleanup_napi_add; - } - - dev_info(&dev->device, "%s success netdev=%s\n", - __func__, netdev->name); - return 0; - -cleanup_napi_add: - visorbus_disable_channel_interrupts(dev); - netif_napi_del(&devdata->napi); - -cleanup_xmit_cmdrsp: - kfree(devdata->xmit_cmdrsp); - -cleanup_cmdrsp_rcv: - kfree(devdata->cmdrsp_rcv); - -cleanup_rcvbuf: - kfree(devdata->rcvbuf); - -cleanup_netdev: - free_netdev(netdev); - return err; -} - -/* host_side_disappeared - IO Partition is gone - * @devdata: Device object. - * - * IO partition servicing this device is gone; do cleanup. - */ -static void host_side_disappeared(struct visornic_devdata *devdata) -{ - unsigned long flags; - - spin_lock_irqsave(&devdata->priv_lock, flags); - /* indicate device destroyed */ - devdata->dev = NULL; - spin_unlock_irqrestore(&devdata->priv_lock, flags); -} - -/* visornic_remove - called when visornic dev goes away - * @dev: Visornic device that is being removed. - * - * Called when DEVICE_DESTROY gets called to remove device. - */ -static void visornic_remove(struct visor_device *dev) -{ - struct visornic_devdata *devdata = dev_get_drvdata(&dev->device); - struct net_device *netdev; - unsigned long flags; - - if (!devdata) { - dev_err(&dev->device, "%s no devdata\n", __func__); - return; - } - spin_lock_irqsave(&devdata->priv_lock, flags); - if (devdata->going_away) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - dev_err(&dev->device, "%s already being removed\n", __func__); - return; - } - devdata->going_away = true; - spin_unlock_irqrestore(&devdata->priv_lock, flags); - netdev = devdata->netdev; - if (!netdev) { - dev_err(&dev->device, "%s not net device\n", __func__); - return; - } - - /* going_away prevents new items being added to the workqueues */ - cancel_work_sync(&devdata->timeout_reset); - - /* this will call visornic_close() */ - unregister_netdev(netdev); - - visorbus_disable_channel_interrupts(devdata->dev); - netif_napi_del(&devdata->napi); - - dev_set_drvdata(&dev->device, NULL); - host_side_disappeared(devdata); - devdata_release(devdata); - free_netdev(netdev); -} - -/* visornic_pause - called when IO Part disappears - * @dev: Visornic device that is being serviced. - * @complete_func: Call when finished. - * - * Called when the IO Partition has gone down. Need to free up resources and - * wait for IO partition to come back. Mark link as down and don't attempt any - * DMA. When we have freed memory, call the complete_func so that Command knows - * we are done. If we don't call complete_func, the IO Partition will never - * come back. - * - * Return: 0 on success. - */ -static int visornic_pause(struct visor_device *dev, - visorbus_state_complete_func complete_func) -{ - struct visornic_devdata *devdata = dev_get_drvdata(&dev->device); - - visornic_serverdown(devdata, complete_func); - return 0; -} - -/* visornic_resume - called when IO Partition has recovered - * @dev: Visornic device that is being serviced. - * @compelte_func: Call when finished. - * - * Called when the IO partition has recovered. Re-establish connection to the IO - * Partition and set the link up. Okay to do DMA again. - * - * Returns 0 for success, negative integer on error. - */ -static int visornic_resume(struct visor_device *dev, - visorbus_state_complete_func complete_func) -{ - struct visornic_devdata *devdata; - struct net_device *netdev; - unsigned long flags; - - devdata = dev_get_drvdata(&dev->device); - if (!devdata) { - dev_err(&dev->device, "%s no devdata\n", __func__); - return -EINVAL; - } - - netdev = devdata->netdev; - - spin_lock_irqsave(&devdata->priv_lock, flags); - if (devdata->server_change_state) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - dev_err(&dev->device, "%s server already changing state\n", - __func__); - return -EINVAL; - } - if (!devdata->server_down) { - spin_unlock_irqrestore(&devdata->priv_lock, flags); - dev_err(&dev->device, "%s server not down\n", __func__); - complete_func(dev, 0); - return 0; - } - devdata->server_change_state = true; - spin_unlock_irqrestore(&devdata->priv_lock, flags); - - /* Must transition channel to ATTACHED state BEFORE - * we can start using the device again. - * TODO: State transitions - */ - visorbus_enable_channel_interrupts(dev); - - rtnl_lock(); - dev_open(netdev, NULL); - rtnl_unlock(); - - complete_func(dev, 0); - return 0; -} - -/* This is used to tell the visorbus driver which types of visor devices - * we support, and what functions to call when a visor device that we support - * is attached or removed. - */ -static struct visor_driver visornic_driver = { - .name = "visornic", - .owner = THIS_MODULE, - .channel_types = visornic_channel_types, - .probe = visornic_probe, - .remove = visornic_remove, - .pause = visornic_pause, - .resume = visornic_resume, - .channel_interrupt = visornic_channel_interrupt, -}; - -/* visornic_init - init function - * - * Init function for the visornic driver. Do initial driver setup and wait - * for devices. - * - * Return: 0 on success, negative integer on error. - */ -static int visornic_init(void) -{ - int err; - - visornic_debugfs_dir = debugfs_create_dir("visornic", NULL); - - debugfs_create_file("info", 0400, visornic_debugfs_dir, NULL, - &debugfs_info_fops); - debugfs_create_file("enable_ints", 0200, visornic_debugfs_dir, NULL, - &debugfs_enable_ints_fops); - - err = visorbus_register_visor_driver(&visornic_driver); - if (err) - debugfs_remove_recursive(visornic_debugfs_dir); - - return err; -} - -/* visornic_cleanup - driver exit routine - * - * Unregister driver from the bus and free up memory. - */ -static void visornic_cleanup(void) -{ - visorbus_unregister_visor_driver(&visornic_driver); - debugfs_remove_recursive(visornic_debugfs_dir); -} - -module_init(visornic_init); -module_exit(visornic_cleanup); - -MODULE_AUTHOR("Unisys"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("s-Par NIC driver for virtual network devices"); diff --git a/drivers/visorbus/Kconfig b/drivers/visorbus/Kconfig deleted file mode 100644 index fa947a79b5cd..000000000000 --- a/drivers/visorbus/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Unisys visorbus configuration -# - -config UNISYS_VISORBUS - tristate "Unisys visorbus driver" - depends on X86_64 && ACPI - help - The visorbus driver is a virtualized bus for the Unisys s-Par firmware. - Virtualized devices allow Linux guests on a system to share disks and - network cards that do not have SR-IOV support, and to be accessed using - the partition desktop application. The visorbus driver is required to - discover devices on an s-Par guest, and must be present for any other - s-Par guest driver to function correctly. diff --git a/drivers/visorbus/Makefile b/drivers/visorbus/Makefile deleted file mode 100644 index e8df59d1301f..000000000000 --- a/drivers/visorbus/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for Unisys visorbus -# - -obj-$(CONFIG_UNISYS_VISORBUS) += visorbus.o - -visorbus-y := visorbus_main.o -visorbus-y += visorchannel.o -visorbus-y += visorchipset.o diff --git a/drivers/visorbus/controlvmchannel.h b/drivers/visorbus/controlvmchannel.h deleted file mode 100644 index c87213554427..000000000000 --- a/drivers/visorbus/controlvmchannel.h +++ /dev/null @@ -1,650 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#ifndef __CONTROLVMCHANNEL_H__ -#define __CONTROLVMCHANNEL_H__ - -#include -#include - -/* {2B3C2D10-7EF5-4ad8-B966-3448B7386B3D} */ -#define VISOR_CONTROLVM_CHANNEL_GUID \ - GUID_INIT(0x2b3c2d10, 0x7ef5, 0x4ad8, \ - 0xb9, 0x66, 0x34, 0x48, 0xb7, 0x38, 0x6b, 0x3d) - -#define CONTROLVM_MESSAGE_MAX 64 - -/* - * Must increment this whenever you insert or delete fields within this channel - * struct. Also increment whenever you change the meaning of fields within this - * channel struct so as to break pre-existing software. Note that you can - * usually add fields to the END of the channel struct withOUT needing to - * increment this. - */ -#define VISOR_CONTROLVM_CHANNEL_VERSIONID 1 - -/* Defines for various channel queues */ -#define CONTROLVM_QUEUE_REQUEST 0 -#define CONTROLVM_QUEUE_RESPONSE 1 -#define CONTROLVM_QUEUE_EVENT 2 -#define CONTROLVM_QUEUE_ACK 3 - -/* Max num of messages stored during IOVM creation to be reused after crash */ -#define CONTROLVM_CRASHMSG_MAX 2 - -/* - * struct visor_segment_state - * @enabled: May enter other states. - * @active: Assigned to active partition. - * @alive: Configure message sent to service/server. - * @revoked: Similar to partition state ShuttingDown. - * @allocated: Memory (device/port number) has been selected by Command. - * @known: Has been introduced to the service/guest partition. - * @ready: Service/Guest partition has responded to introduction. - * @operating: Resource is configured and operating. - * @reserved: Natural alignment. - * - * Note: Don't use high bit unless we need to switch to ushort which is - * non-compliant. - */ -struct visor_segment_state { - u16 enabled:1; - u16 active:1; - u16 alive:1; - u16 revoked:1; - u16 allocated:1; - u16 known:1; - u16 ready:1; - u16 operating:1; - u16 reserved:8; -} __packed; - -static const struct visor_segment_state segment_state_running = { - 1, 1, 1, 0, 1, 1, 1, 1 -}; - -static const struct visor_segment_state segment_state_paused = { - 1, 1, 1, 0, 1, 1, 1, 0 -}; - -static const struct visor_segment_state segment_state_standby = { - 1, 1, 0, 0, 1, 1, 1, 0 -}; - -/* - * enum controlvm_id - * @CONTROLVM_INVALID: - * @CONTROLVM_BUS_CREATE: CP --> SP, GP. - * @CONTROLVM_BUS_DESTROY: CP --> SP, GP. - * @CONTROLVM_BUS_CONFIGURE: CP --> SP. - * @CONTROLVM_BUS_CHANGESTATE: CP --> SP, GP. - * @CONTROLVM_BUS_CHANGESTATE_EVENT: SP, GP --> CP. - * @CONTROLVM_DEVICE_CREATE: CP --> SP, GP. - * @CONTROLVM_DEVICE_DESTROY: CP --> SP, GP. - * @CONTROLVM_DEVICE_CONFIGURE: CP --> SP. - * @CONTROLVM_DEVICE_CHANGESTATE: CP --> SP, GP. - * @CONTROLVM_DEVICE_CHANGESTATE_EVENT: SP, GP --> CP. - * @CONTROLVM_DEVICE_RECONFIGURE: CP --> Boot. - * @CONTROLVM_CHIPSET_INIT: CP --> SP, GP. - * @CONTROLVM_CHIPSET_STOP: CP --> SP, GP. - * @CONTROLVM_CHIPSET_READY: CP --> SP. - * @CONTROLVM_CHIPSET_SELFTEST: CP --> SP. - * - * Ids for commands that may appear in either queue of a ControlVm channel. - * - * Commands that are initiated by the command partition (CP), by an IO or - * console service partition (SP), or by a guest partition (GP) are: - * - issued on the RequestQueue queue (q #0) in the ControlVm channel - * - responded to on the ResponseQueue queue (q #1) in the ControlVm channel - * - * Events that are initiated by an IO or console service partition (SP) or - * by a guest partition (GP) are: - * - issued on the EventQueue queue (q #2) in the ControlVm channel - * - responded to on the EventAckQueue queue (q #3) in the ControlVm channel - */ -enum controlvm_id { - CONTROLVM_INVALID = 0, - /* - * SWITCH commands required Parameter: SwitchNumber. - * BUS commands required Parameter: BusNumber - */ - CONTROLVM_BUS_CREATE = 0x101, - CONTROLVM_BUS_DESTROY = 0x102, - CONTROLVM_BUS_CONFIGURE = 0x104, - CONTROLVM_BUS_CHANGESTATE = 0x105, - CONTROLVM_BUS_CHANGESTATE_EVENT = 0x106, - /* DEVICE commands required Parameter: BusNumber, DeviceNumber */ - CONTROLVM_DEVICE_CREATE = 0x201, - CONTROLVM_DEVICE_DESTROY = 0x202, - CONTROLVM_DEVICE_CONFIGURE = 0x203, - CONTROLVM_DEVICE_CHANGESTATE = 0x204, - CONTROLVM_DEVICE_CHANGESTATE_EVENT = 0x205, - CONTROLVM_DEVICE_RECONFIGURE = 0x206, - /* CHIPSET commands */ - CONTROLVM_CHIPSET_INIT = 0x301, - CONTROLVM_CHIPSET_STOP = 0x302, - CONTROLVM_CHIPSET_READY = 0x304, - CONTROLVM_CHIPSET_SELFTEST = 0x305, -}; - -/* - * struct irq_info - * @reserved1: Natural alignment purposes - * @recv_irq_handle: Specifies interrupt handle. It is used to retrieve the - * corresponding interrupt pin from Monitor; and the interrupt - * pin is used to connect to the corresponding interrupt. - * Used by IOPart-GP only. - * @recv_irq_vector: Specifies interrupt vector. It, interrupt pin, and shared - * are used to connect to the corresponding interrupt. - * Used by IOPart-GP only. - * @recv_irq_shared: Specifies if the recvInterrupt is shared. It, interrupt - * pin and vector are used to connect to 0 = not shared; - * 1 = shared the corresponding interrupt. - * Used by IOPart-GP only. - * @reserved: Natural alignment purposes - */ -struct irq_info { - u64 reserved1; - u64 recv_irq_handle; - u32 recv_irq_vector; - u8 recv_irq_shared; - u8 reserved[3]; -} __packed; - -/* - * struct efi_visor_indication - * @boot_to_fw_ui: Stop in UEFI UI - * @clear_nvram: Clear NVRAM - * @clear_cmos: Clear CMOS - * @boot_to_tool: Run install tool - * @reserved: Natural alignment - */ -struct efi_visor_indication { - u64 boot_to_fw_ui:1; - u64 clear_nvram:1; - u64 clear_cmos:1; - u64 boot_to_tool:1; - /* Remaining bits are available */ - u64 reserved:60; -} __packed; - -enum visor_chipset_feature { - VISOR_CHIPSET_FEATURE_REPLY = 0x00000001, - VISOR_CHIPSET_FEATURE_PARA_HOTPLUG = 0x00000002, -}; - -/* - * struct controlvm_message_header - * @id: See CONTROLVM_ID. - * @message_size: Includes size of this struct + size of message. - * @segment_index: Index of segment containing Vm message/information. - * @completion_status: Error status code or result of message completion. - * @struct flags: - * @failed: =1 in a response to signify failure. - * @response_expected: =1 in all messages that expect a response. - * @server: =1 in all bus & device-related messages where the - * message receiver is to act as the bus or device - * server. - * @test_message: =1 for testing use only (Control and Command - * ignore this). - * @partial_completion: =1 if there are forthcoming responses/acks - * associated with this message. - * @preserve: =1 this is to let us know to preserve channel - * contents. - * @writer_in_diag: =1 the DiagWriter is active in the Diagnostic - * Partition. - * @reserve: Natural alignment. - * @reserved: Natural alignment. - * @message_handle: Identifies the particular message instance. - * @payload_vm_offset: Offset of payload area from start of this instance. - * @payload_max_bytes: Maximum bytes allocated in payload area of ControlVm - * segment. - * @payload_bytes: Actual number of bytes of payload area to copy between - * IO/Command. If non-zero, there is a payload to copy. - * - * This is the common structure that is at the beginning of every - * ControlVm message (both commands and responses) in any ControlVm - * queue. Commands are easily distinguished from responses by - * looking at the flags.response field. - */ -struct controlvm_message_header { - u32 id; - /* - * For requests, indicates the message type. For responses, indicates - * the type of message we are responding to. - */ - u32 message_size; - u32 segment_index; - u32 completion_status; - struct { - u32 failed:1; - u32 response_expected:1; - u32 server:1; - u32 test_message:1; - u32 partial_completion:1; - u32 preserve:1; - u32 writer_in_diag:1; - u32 reserve:25; - } __packed flags; - u32 reserved; - u64 message_handle; - u64 payload_vm_offset; - u32 payload_max_bytes; - u32 payload_bytes; -} __packed; - -/* - * struct controlvm_packet_device_create - For CONTROLVM_DEVICE_CREATE - * @bus_no: Bus # (0..n-1) from the msg receiver's end. - * @dev_no: Bus-relative (0..n-1) device number. - * @channel_addr: Guest physical address of the channel, which can be - * dereferenced by the receiver of this ControlVm command. - * @channel_bytes: Specifies size of the channel in bytes. - * @data_type_uuid: Specifies format of data in channel. - * @dev_inst_uuid: Instance guid for the device. - * @irq_info intr: Specifies interrupt information. - */ -struct controlvm_packet_device_create { - u32 bus_no; - u32 dev_no; - u64 channel_addr; - u64 channel_bytes; - guid_t data_type_guid; - guid_t dev_inst_guid; - struct irq_info intr; -} __packed; - -/* - * struct controlvm_packet_device_configure - For CONTROLVM_DEVICE_CONFIGURE - * @bus_no: Bus number (0..n-1) from the msg receiver's perspective. - * @dev_no: Bus-relative (0..n-1) device number. - */ -struct controlvm_packet_device_configure { - u32 bus_no; - u32 dev_no; -} __packed; - -/* Total 128 bytes */ -struct controlvm_message_device_create { - struct controlvm_message_header header; - struct controlvm_packet_device_create packet; -} __packed; - -/* Total 56 bytes */ -struct controlvm_message_device_configure { - struct controlvm_message_header header; - struct controlvm_packet_device_configure packet; -} __packed; - -/* - * struct controlvm_message_packet - This is the format for a message in any - * ControlVm queue. - * @struct create_bus: For CONTROLVM_BUS_CREATE. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @dev_count: Indicates the max number of devices on this bus. - * @channel_addr: Guest physical address of the channel, which can be - * dereferenced by the receiver of this ControlVM - * command. - * @channel_bytes: Size of the channel. - * @bus_data_type_uuid: Indicates format of data in bus channel. - * @bus_inst_uuid: Instance uuid for the bus. - * - * @struct destroy_bus: For CONTROLVM_BUS_DESTROY. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @reserved: Natural alignment purposes. - * - * @struct configure_bus: For CONTROLVM_BUS_CONFIGURE. - * @bus_no: Bus # (0..n-1) from the receiver's perspective. - * @reserved1: For alignment purposes. - * @guest_handle: This is used to convert guest physical address to - * physical address. - * @recv_bus_irq_handle: Specifies interrupt info. It is used by SP to - * register to receive interrupts from the CP. This - * interrupt is used for bus level notifications. - * The corresponding sendBusInterruptHandle is kept - * in CP. - * - * @struct create_device: For CONTROLVM_DEVICE_CREATE. - * - * @struct destroy_device: For CONTROLVM_DEVICE_DESTROY. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @dev_no: Bus-relative (0..n-1) device number. - * - * @struct configure_device: For CONTROLVM_DEVICE_CONFIGURE. - * - * @struct reconfigure_device: For CONTROLVM_DEVICE_RECONFIGURE. - * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. - * @dev_no: Bus-relative (0..n-1) device number. - * - * @struct bus_change_state: For CONTROLVM_BUS_CHANGESTATE. - * @bus_no: - * @struct state: - * @reserved: Natural alignment purposes. - * - * @struct device_change_state: For CONTROLVM_DEVICE_CHANGESTATE. - * @bus_no: - * @dev_no: - * @struct state: - * @struct flags: - * @phys_device: =1 if message is for a physical device. - * @reserved: Natural alignment. - * @reserved1: Natural alignment. - * @reserved: Natural alignment purposes. - * - * @struct device_change_state_event: For CONTROLVM_DEVICE_CHANGESTATE_EVENT. - * @bus_no: - * @dev_no: - * @struct state: - * @reserved: Natural alignment purposes. - * - * @struct init_chipset: For CONTROLVM_CHIPSET_INIT. - * @bus_count: Indicates the max number of busses. - * @switch_count: Indicates the max number of switches. - * @enum features: - * @platform_number: - * - * @struct chipset_selftest: For CONTROLVM_CHIPSET_SELFTEST. - * @options: Reserved. - * @test: Bit 0 set to run embedded selftest. - * - * @addr: A physical address of something, that can be dereferenced by the - * receiver of this ControlVm command. - * - * @handle: A handle of something (depends on command id). - */ -struct controlvm_message_packet { - union { - struct { - u32 bus_no; - u32 dev_count; - u64 channel_addr; - u64 channel_bytes; - guid_t bus_data_type_guid; - guid_t bus_inst_guid; - } __packed create_bus; - struct { - u32 bus_no; - u32 reserved; - } __packed destroy_bus; - struct { - u32 bus_no; - u32 reserved1; - u64 guest_handle; - u64 recv_bus_irq_handle; - } __packed configure_bus; - struct controlvm_packet_device_create create_device; - struct { - u32 bus_no; - u32 dev_no; - } __packed destroy_device; - struct controlvm_packet_device_configure configure_device; - struct { - u32 bus_no; - u32 dev_no; - } __packed reconfigure_device; - struct { - u32 bus_no; - struct visor_segment_state state; - u8 reserved[2]; - } __packed bus_change_state; - struct { - u32 bus_no; - u32 dev_no; - struct visor_segment_state state; - struct { - u32 phys_device:1; - u32 reserved:31; - u32 reserved1; - } __packed flags; - u8 reserved[2]; - } __packed device_change_state; - struct { - u32 bus_no; - u32 dev_no; - struct visor_segment_state state; - u8 reserved[6]; - } __packed device_change_state_event; - struct { - u32 bus_count; - u32 switch_count; - enum visor_chipset_feature features; - u32 platform_number; - } __packed init_chipset; - struct { - u32 options; - u32 test; - } __packed chipset_selftest; - u64 addr; - u64 handle; - }; -} __packed; - -/* All messages in any ControlVm queue have this layout. */ -struct controlvm_message { - struct controlvm_message_header hdr; - struct controlvm_message_packet cmd; -} __packed; - -/* - * struct visor_controlvm_channel - * @struct header: - * @gp_controlvm: Guest phys addr of this channel. - * @gp_partition_tables: Guest phys addr of partition tables. - * @gp_diag_guest: Guest phys addr of diagnostic channel. - * @gp_boot_romdisk: Guest phys addr of (read* only) Boot - * ROM disk. - * @gp_boot_ramdisk: Guest phys addr of writable Boot RAM - * disk. - * @gp_acpi_table: Guest phys addr of acpi table. - * @gp_control_channel: Guest phys addr of control channel. - * @gp_diag_romdisk: Guest phys addr of diagnostic ROM disk. - * @gp_nvram: Guest phys addr of NVRAM channel. - * @request_payload_offset: Offset to request payload area. - * @event_payload_offset: Offset to event payload area. - * @request_payload_bytes: Bytes available in request payload area. - * @event_payload_bytes: Bytes available in event payload area. - * @control_channel_bytes: - * @nvram_channel_bytes: Bytes in PartitionNvram segment. - * @message_bytes: sizeof(CONTROLVM_MESSAGE). - * @message_count: CONTROLVM_MESSAGE_MAX. - * @gp_smbios_table: Guest phys addr of SMBIOS tables. - * @gp_physical_smbios_table: Guest phys addr of SMBIOS table. - * @gp_reserved: VISOR_MAX_GUESTS_PER_SERVICE. - * @virtual_guest_firmware_image_base: Guest physical address of EFI firmware - * image base. - * @virtual_guest_firmware_entry_point: Guest physical address of EFI firmware - * entry point. - * @virtual_guest_firmware_image_size: Guest EFI firmware image size. - * @virtual_guest_firmware_boot_base: GPA = 1MB where EFI firmware image is - * copied to. - * @virtual_guest_image_base: - * @virtual_guest_image_size: - * @prototype_control_channel_offset: - * @virtual_guest_partition_handle: - * @restore_action: Restore Action field to restore the - * guest partition. - * @dump_action: For Windows guests it shows if the - * visordisk is in dump mode. - * @nvram_fail_count: - * @saved_crash_message_count: = CONTROLVM_CRASHMSG_MAX. - * @saved_crash_message_offset: Offset to request payload area needed - * for crash dump. - * @installation_error: Type of error encountered during - * installation. - * @installation_text_id: Id of string to display. - * @installation_remaining_steps: Number of remaining installation steps - * (for progress bars). - * @tool_action: VISOR_TOOL_ACTIONS Installation Action - * field. - * @reserved: Alignment. - * @struct efi_visor_ind: - * @sp_reserved: - * @reserved2: Force signals to begin on 128-byte - * cache line. - * @struct request_queue: Guest partition uses this queue to send - * requests to Control. - * @struct response_queue: Control uses this queue to respond to - * service or guest partition request. - * @struct event_queue: Control uses this queue to send events - * to guest partition. - * @struct event_ack_queue: Service or guest partition uses this - * queue to ack Control events. - * @struct request_msg: Request fixed-size message pool - - * does not include payload. - * @struct response_msg: Response fixed-size message pool - - * does not include payload. - * @struct event_msg: Event fixed-size message pool - - * does not include payload. - * @struct event_ack_msg: Ack fixed-size message pool - - * does not include payload. - * @struct saved_crash_msg: Message stored during IOVM creation to - * be reused after crash. - */ -struct visor_controlvm_channel { - struct channel_header header; - u64 gp_controlvm; - u64 gp_partition_tables; - u64 gp_diag_guest; - u64 gp_boot_romdisk; - u64 gp_boot_ramdisk; - u64 gp_acpi_table; - u64 gp_control_channel; - u64 gp_diag_romdisk; - u64 gp_nvram; - u64 request_payload_offset; - u64 event_payload_offset; - u32 request_payload_bytes; - u32 event_payload_bytes; - u32 control_channel_bytes; - u32 nvram_channel_bytes; - u32 message_bytes; - u32 message_count; - u64 gp_smbios_table; - u64 gp_physical_smbios_table; - char gp_reserved[2688]; - u64 virtual_guest_firmware_image_base; - u64 virtual_guest_firmware_entry_point; - u64 virtual_guest_firmware_image_size; - u64 virtual_guest_firmware_boot_base; - u64 virtual_guest_image_base; - u64 virtual_guest_image_size; - u64 prototype_control_channel_offset; - u64 virtual_guest_partition_handle; - u16 restore_action; - u16 dump_action; - u16 nvram_fail_count; - u16 saved_crash_message_count; - u32 saved_crash_message_offset; - u32 installation_error; - u32 installation_text_id; - u16 installation_remaining_steps; - u8 tool_action; - u8 reserved; - struct efi_visor_indication efi_visor_ind; - u32 sp_reserved; - u8 reserved2[28]; - struct signal_queue_header request_queue; - struct signal_queue_header response_queue; - struct signal_queue_header event_queue; - struct signal_queue_header event_ack_queue; - struct controlvm_message request_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message response_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message event_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message event_ack_msg[CONTROLVM_MESSAGE_MAX]; - struct controlvm_message saved_crash_msg[CONTROLVM_CRASHMSG_MAX]; -} __packed; - -/* - * struct visor_controlvm_parameters_header - * - * The following header will be located at the beginning of PayloadVmOffset for - * various ControlVm commands. The receiver of a ControlVm command with a - * PayloadVmOffset will dereference this address and then use connection_offset, - * initiator_offset, and target_offset to get the location of UTF-8 formatted - * strings that can be parsed to obtain command-specific information. The value - * of total_length should equal PayloadBytes. The format of the strings at - * PayloadVmOffset will take different forms depending on the message. - */ -struct visor_controlvm_parameters_header { - u32 total_length; - u32 header_length; - u32 connection_offset; - u32 connection_length; - u32 initiator_offset; - u32 initiator_length; - u32 target_offset; - u32 target_length; - u32 client_offset; - u32 client_length; - u32 name_offset; - u32 name_length; - guid_t id; - u32 revision; - /* Natural alignment */ - u32 reserved; -} __packed; - -/* General Errors------------------------------------------------------[0-99] */ -#define CONTROLVM_RESP_SUCCESS 0 -#define CONTROLVM_RESP_ALREADY_DONE 1 -#define CONTROLVM_RESP_IOREMAP_FAILED 2 -#define CONTROLVM_RESP_KMALLOC_FAILED 3 -#define CONTROLVM_RESP_ID_UNKNOWN 4 -#define CONTROLVM_RESP_ID_INVALID_FOR_CLIENT 5 -/* CONTROLVM_INIT_CHIPSET-------------------------------------------[100-199] */ -#define CONTROLVM_RESP_CLIENT_SWITCHCOUNT_NONZERO 100 -#define CONTROLVM_RESP_EXPECTED_CHIPSET_INIT 101 -/* Maximum Limit----------------------------------------------------[200-299] */ -/* BUS_CREATE */ -#define CONTROLVM_RESP_ERROR_MAX_BUSES 201 -/* DEVICE_CREATE */ -#define CONTROLVM_RESP_ERROR_MAX_DEVICES 202 -/* Payload and Parameter Related------------------------------------[400-499] */ -/* SWITCH_ATTACHEXTPORT, DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_PAYLOAD_INVALID 400 -/* Multiple */ -#define CONTROLVM_RESP_INITIATOR_PARAMETER_INVALID 401 -/* DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_TARGET_PARAMETER_INVALID 402 -/* DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_CLIENT_PARAMETER_INVALID 403 -/* Specified[Packet Structure] Value--------------------------------[500-599] */ -/* SWITCH_ATTACHINTPORT */ -/* BUS_CONFIGURE, DEVICE_CREATE, DEVICE_CONFIG, DEVICE_DESTROY */ -#define CONTROLVM_RESP_BUS_INVALID 500 -/* SWITCH_ATTACHINTPORT*/ -/* DEVICE_CREATE, DEVICE_CONFIGURE, DEVICE_DESTROY */ -#define CONTROLVM_RESP_DEVICE_INVALID 501 -/* DEVICE_CREATE, DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_CHANNEL_INVALID 502 -/* Partition Driver Callback Interface------------------------------[600-699] */ -/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */ -#define CONTROLVM_RESP_VIRTPCI_DRIVER_FAILURE 604 -/* Unable to invoke VIRTPCI callback. VIRTPCI Callback returned error. */ -/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */ -#define CONTROLVM_RESP_VIRTPCI_DRIVER_CALLBACK_ERROR 605 -/* Generic device callback returned error. */ -/* SWITCH_ATTACHEXTPORT, SWITCH_DETACHEXTPORT, DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_GENERIC_DRIVER_CALLBACK_ERROR 606 -/* Bus Related------------------------------------------------------[700-799] */ -/* BUS_DESTROY */ -#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED 700 -/* Channel Related--------------------------------------------------[800-899] */ -/* GET_CHANNELINFO, DEVICE_DESTROY */ -#define CONTROLVM_RESP_CHANNEL_TYPE_UNKNOWN 800 -/* DEVICE_CREATE */ -#define CONTROLVM_RESP_CHANNEL_SIZE_TOO_SMALL 801 -/* Chipset Shutdown Related---------------------------------------[1000-1099] */ -#define CONTROLVM_RESP_CHIPSET_SHUTDOWN_FAILED 1000 -#define CONTROLVM_RESP_CHIPSET_SHUTDOWN_ALREADY_ACTIVE 1001 -/* Chipset Stop Related-------------------------------------------[1100-1199] */ -#define CONTROLVM_RESP_CHIPSET_STOP_FAILED_BUS 1100 -#define CONTROLVM_RESP_CHIPSET_STOP_FAILED_SWITCH 1101 -/* Device Related-------------------------------------------------[1400-1499] */ -#define CONTROLVM_RESP_DEVICE_UDEV_TIMEOUT 1400 - -/* __CONTROLVMCHANNEL_H__ */ -#endif diff --git a/drivers/visorbus/vbuschannel.h b/drivers/visorbus/vbuschannel.h deleted file mode 100644 index 98711fb6d66e..000000000000 --- a/drivers/visorbus/vbuschannel.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#ifndef __VBUSCHANNEL_H__ -#define __VBUSCHANNEL_H__ - -/* - * The vbus channel is the channel area provided via the BUS_CREATE controlvm - * message for each virtual bus. This channel area is provided to both server - * and client ends of the bus. The channel header area is initialized by - * the server, and the remaining information is filled in by the client. - * We currently use this for the client to provide various information about - * the client devices and client drivers for the server end to see. - */ - -#include -#include - -/* {193b331b-c58f-11da-95a9-00e08161165f} */ -#define VISOR_VBUS_CHANNEL_GUID \ - GUID_INIT(0x193b331b, 0xc58f, 0x11da, \ - 0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f) - -/* - * Must increment this whenever you insert or delete fields within this channel - * struct. Also increment whenever you change the meaning of fields within this - * channel struct so as to break pre-existing software. Note that you can - * usually add fields to the END of the channel struct withOUT needing to - * increment this. - */ -#define VISOR_VBUS_CHANNEL_VERSIONID 1 - -/* - * struct visor_vbus_deviceinfo - * @devtype: Short string identifying the device type. - * @drvname: Driver .sys file name. - * @infostrs: Kernel vversion. - * @reserved: Pad size to 256 bytes. - * - * An array of this struct is present in the channel area for each vbus. It is - * filled in by the client side to provide info about the device and driver from - * the client's perspective. - */ -struct visor_vbus_deviceinfo { - u8 devtype[16]; - u8 drvname[16]; - u8 infostrs[96]; - u8 reserved[128]; -} __packed; - -/* - * struct visor_vbus_headerinfo - * @struct_bytes: Size of this struct in bytes. - * @device_info_struct_bytes: Size of VISOR_VBUS_DEVICEINFO. - * @dev_info_count: Num of items in DevInfo member. This is the - * allocated size. - * @chp_info_offset: Byte offset from beginning of this struct to the - * ChpInfo struct. - * @bus_info_offset: Byte offset from beginning of this struct to the - * BusInfo struct. - * @dev_info_offset: Byte offset from beginning of this struct to the - * DevInfo array. - * @reserved: Natural alignment. - */ -struct visor_vbus_headerinfo { - u32 struct_bytes; - u32 device_info_struct_bytes; - u32 dev_info_count; - u32 chp_info_offset; - u32 bus_info_offset; - u32 dev_info_offset; - u8 reserved[104]; -} __packed; - -/* - * struct visor_vbus_channel - * @channel_header: Initialized by server. - * @hdr_info: Initialized by server. - * @chp_info: Describes client chipset device and driver. - * @bus_info: Describes client bus device and driver. - * @dev_info: Describes client device and driver for each device on the - * bus. - */ -struct visor_vbus_channel { - struct channel_header channel_header; - struct visor_vbus_headerinfo hdr_info; - struct visor_vbus_deviceinfo chp_info; - struct visor_vbus_deviceinfo bus_info; - struct visor_vbus_deviceinfo dev_info[]; -} __packed; - -#endif diff --git a/drivers/visorbus/visorbus_main.c b/drivers/visorbus/visorbus_main.c deleted file mode 100644 index 152fd29f04f2..000000000000 --- a/drivers/visorbus/visorbus_main.c +++ /dev/null @@ -1,1234 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright � 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#include -#include -#include -#include -#include -#include - -#include "visorbus_private.h" - -static const guid_t visor_vbus_channel_guid = VISOR_VBUS_CHANNEL_GUID; - -/* Display string that is guaranteed to be no longer the 99 characters */ -#define LINESIZE 99 -#define POLLJIFFIES_NORMALCHANNEL 10 - -/* stores whether bus_registration was successful */ -static bool initialized; -static struct dentry *visorbus_debugfs_dir; - -/* - * DEVICE type attributes - * - * The modalias file will contain the guid of the device. - */ -static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct visor_device *vdev; - const guid_t *guid; - - vdev = to_visor_device(dev); - guid = visorchannel_get_guid(vdev->visorchannel); - return sprintf(buf, "visorbus:%pUl\n", guid); -} -static DEVICE_ATTR_RO(modalias); - -static struct attribute *visorbus_dev_attrs[] = { - &dev_attr_modalias.attr, - NULL, -}; - -ATTRIBUTE_GROUPS(visorbus_dev); - -/* filled in with info about parent chipset driver when we register with it */ -static struct visor_vbus_deviceinfo chipset_driverinfo; -/* filled in with info about this driver, wrt it servicing client busses */ -static struct visor_vbus_deviceinfo clientbus_driverinfo; - -/* list of visor_device structs, linked via .list_all */ -static LIST_HEAD(list_all_bus_instances); -/* list of visor_device structs, linked via .list_all */ -static LIST_HEAD(list_all_device_instances); - -/* - * Generic function useful for validating any type of channel when it is - * received by the client that will be accessing the channel. - * Note that is only needed for callers in the EFI environment, and - * is used to pass the EFI_DIAG_CAPTURE_PROTOCOL needed to log messages. - */ -int visor_check_channel(struct channel_header *ch, struct device *dev, - const guid_t *expected_guid, char *chname, - u64 expected_min_bytes, u32 expected_version, - u64 expected_signature) -{ - if (!guid_is_null(expected_guid)) { - /* caller wants us to verify type GUID */ - if (!guid_equal(&ch->chtype, expected_guid)) { - dev_err(dev, "Channel mismatch on channel=%s(%pUL) field=type expected=%pUL actual=%pUL\n", - chname, expected_guid, expected_guid, - &ch->chtype); - return 0; - } - } - /* verify channel size */ - if (expected_min_bytes > 0) { - if (ch->size < expected_min_bytes) { - dev_err(dev, "Channel mismatch on channel=%s(%pUL) field=size expected=0x%-8.8Lx actual=0x%-8.8Lx\n", - chname, expected_guid, - (unsigned long long)expected_min_bytes, - ch->size); - return 0; - } - } - /* verify channel version */ - if (expected_version > 0) { - if (ch->version_id != expected_version) { - dev_err(dev, "Channel mismatch on channel=%s(%pUL) field=version expected=0x%-8.8lx actual=0x%-8.8x\n", - chname, expected_guid, - (unsigned long)expected_version, - ch->version_id); - return 0; - } - } - /* verify channel signature */ - if (expected_signature > 0) { - if (ch->signature != expected_signature) { - dev_err(dev, "Channel mismatch on channel=%s(%pUL) field=signature expected=0x%-8.8Lx actual=0x%-8.8Lx\n", - chname, expected_guid, expected_signature, - ch->signature); - return 0; - } - } - return 1; -} - -static int visorbus_uevent(struct device *xdev, struct kobj_uevent_env *env) -{ - struct visor_device *dev; - const guid_t *guid; - - dev = to_visor_device(xdev); - guid = visorchannel_get_guid(dev->visorchannel); - return add_uevent_var(env, "MODALIAS=visorbus:%pUl", guid); -} - -/* - * visorbus_match() - called automatically upon adding a visor_device - * (device_add), or adding a visor_driver - * (visorbus_register_visor_driver) - * @xdev: struct device for the device being matched - * @xdrv: struct device_driver for driver to match device against - * - * Return: 1 iff the provided driver can control the specified device - */ -static int visorbus_match(struct device *xdev, struct device_driver *xdrv) -{ - const guid_t *channel_type; - int i; - struct visor_device *dev; - struct visor_driver *drv; - struct visorchannel *chan; - - dev = to_visor_device(xdev); - channel_type = visorchannel_get_guid(dev->visorchannel); - drv = to_visor_driver(xdrv); - chan = dev->visorchannel; - if (!drv->channel_types) - return 0; - for (i = 0; !guid_is_null(&drv->channel_types[i].guid); i++) - if (guid_equal(&drv->channel_types[i].guid, channel_type) && - visor_check_channel(visorchannel_get_header(chan), - xdev, - &drv->channel_types[i].guid, - (char *)drv->channel_types[i].name, - drv->channel_types[i].min_bytes, - drv->channel_types[i].version, - VISOR_CHANNEL_SIGNATURE)) - return i + 1; - return 0; -} - -/* - * This describes the TYPE of bus. - * (Don't confuse this with an INSTANCE of the bus.) - */ -static struct bus_type visorbus_type = { - .name = "visorbus", - .match = visorbus_match, - .uevent = visorbus_uevent, - .dev_groups = visorbus_dev_groups, -}; - -struct visor_busdev { - u32 bus_no; - u32 dev_no; -}; - -static int match_visorbus_dev_by_id(struct device *dev, const void *data) -{ - struct visor_device *vdev = to_visor_device(dev); - const struct visor_busdev *id = data; - - if (vdev->chipset_bus_no == id->bus_no && - vdev->chipset_dev_no == id->dev_no) - return 1; - return 0; -} - -struct visor_device *visorbus_get_device_by_id(u32 bus_no, u32 dev_no, - struct visor_device *from) -{ - struct device *dev; - struct device *dev_start = NULL; - struct visor_busdev id = { - .bus_no = bus_no, - .dev_no = dev_no - }; - - if (from) - dev_start = &from->device; - dev = bus_find_device(&visorbus_type, dev_start, (void *)&id, - match_visorbus_dev_by_id); - if (!dev) - return NULL; - return to_visor_device(dev); -} - -/* - * visorbus_release_busdevice() - called when device_unregister() is called for - * the bus device instance, after all other tasks - * involved with destroying the dev are complete - * @xdev: struct device for the bus being released - */ -static void visorbus_release_busdevice(struct device *xdev) -{ - struct visor_device *dev = dev_get_drvdata(xdev); - - debugfs_remove(dev->debugfs_bus_info); - debugfs_remove_recursive(dev->debugfs_dir); - visorchannel_destroy(dev->visorchannel); - kfree(dev); -} - -/* - * visorbus_release_device() - called when device_unregister() is called for - * each child device instance - * @xdev: struct device for the visor device being released - */ -static void visorbus_release_device(struct device *xdev) -{ - struct visor_device *dev = to_visor_device(xdev); - - visorchannel_destroy(dev->visorchannel); - kfree(dev); -} - -/* - * BUS specific channel attributes to appear under - * /sys/bus/visorbus/dev/channel - */ - -static ssize_t physaddr_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - - return sprintf(buf, "0x%llx\n", - visorchannel_get_physaddr(vdev->visorchannel)); -} -static DEVICE_ATTR_RO(physaddr); - -static ssize_t nbytes_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - - return sprintf(buf, "0x%lx\n", - visorchannel_get_nbytes(vdev->visorchannel)); -} -static DEVICE_ATTR_RO(nbytes); - -static ssize_t clientpartition_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - - return sprintf(buf, "0x%llx\n", - visorchannel_get_clientpartition(vdev->visorchannel)); -} -static DEVICE_ATTR_RO(clientpartition); - -static ssize_t typeguid_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - char typeid[LINESIZE]; - - return sprintf(buf, "%s\n", - visorchannel_id(vdev->visorchannel, typeid)); -} -static DEVICE_ATTR_RO(typeguid); - -static ssize_t zoneguid_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - char zoneid[LINESIZE]; - - return sprintf(buf, "%s\n", - visorchannel_zoneid(vdev->visorchannel, zoneid)); -} -static DEVICE_ATTR_RO(zoneguid); - -static ssize_t typename_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - int i = 0; - struct bus_type *xbus = dev->bus; - struct device_driver *xdrv = dev->driver; - struct visor_driver *drv = NULL; - - if (!xdrv) - return 0; - i = xbus->match(dev, xdrv); - if (!i) - return 0; - drv = to_visor_driver(xdrv); - return sprintf(buf, "%s\n", drv->channel_types[i - 1].name); -} -static DEVICE_ATTR_RO(typename); - -static struct attribute *channel_attrs[] = { - &dev_attr_physaddr.attr, - &dev_attr_nbytes.attr, - &dev_attr_clientpartition.attr, - &dev_attr_typeguid.attr, - &dev_attr_zoneguid.attr, - &dev_attr_typename.attr, - NULL -}; - -ATTRIBUTE_GROUPS(channel); - -/* - * BUS instance attributes - * - * define & implement display of bus attributes under - * /sys/bus/visorbus/devices/visorbus. - */ -static ssize_t partition_handle_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - u64 handle = visorchannel_get_clientpartition(vdev->visorchannel); - - return sprintf(buf, "0x%llx\n", handle); -} -static DEVICE_ATTR_RO(partition_handle); - -static ssize_t partition_guid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - - return sprintf(buf, "{%pUb}\n", &vdev->partition_guid); -} -static DEVICE_ATTR_RO(partition_guid); - -static ssize_t partition_name_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - - return sprintf(buf, "%s\n", vdev->name); -} -static DEVICE_ATTR_RO(partition_name); - -static ssize_t channel_addr_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - u64 addr = visorchannel_get_physaddr(vdev->visorchannel); - - return sprintf(buf, "0x%llx\n", addr); -} -static DEVICE_ATTR_RO(channel_addr); - -static ssize_t channel_bytes_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - u64 nbytes = visorchannel_get_nbytes(vdev->visorchannel); - - return sprintf(buf, "0x%llx\n", nbytes); -} -static DEVICE_ATTR_RO(channel_bytes); - -static ssize_t channel_id_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct visor_device *vdev = to_visor_device(dev); - int len = 0; - - visorchannel_id(vdev->visorchannel, buf); - len = strlen(buf); - buf[len++] = '\n'; - return len; -} -static DEVICE_ATTR_RO(channel_id); - -static struct attribute *visorbus_attrs[] = { - &dev_attr_partition_handle.attr, - &dev_attr_partition_guid.attr, - &dev_attr_partition_name.attr, - &dev_attr_channel_addr.attr, - &dev_attr_channel_bytes.attr, - &dev_attr_channel_id.attr, - NULL -}; - -ATTRIBUTE_GROUPS(visorbus); - -/* - * BUS debugfs entries - * - * define & implement display of debugfs attributes under - * /sys/kernel/debug/visorbus/visorbus. - */ - -/* - * vbuschannel_print_devinfo() - format a struct visor_vbus_deviceinfo - * and write it to a seq_file - * @devinfo: the struct visor_vbus_deviceinfo to format - * @seq: seq_file to write to - * @devix: the device index to be included in the output data, or -1 if no - * device index is to be included - * - * Reads @devInfo, and writes it in human-readable notation to @seq. - */ -static void vbuschannel_print_devinfo(struct visor_vbus_deviceinfo *devinfo, - struct seq_file *seq, int devix) -{ - /* uninitialized vbus device entry */ - if (!isprint(devinfo->devtype[0])) - return; - if (devix >= 0) - seq_printf(seq, "[%d]", devix); - else - /* vbus device entry is for bus or chipset */ - seq_puts(seq, " "); - /* - * Note: because the s-Par back-end is free to scribble in this area, - * we never assume '\0'-termination. - */ - seq_printf(seq, "%-*.*s ", (int)sizeof(devinfo->devtype), - (int)sizeof(devinfo->devtype), devinfo->devtype); - seq_printf(seq, "%-*.*s ", (int)sizeof(devinfo->drvname), - (int)sizeof(devinfo->drvname), devinfo->drvname); - seq_printf(seq, "%.*s\n", (int)sizeof(devinfo->infostrs), - devinfo->infostrs); -} - -static int bus_info_debugfs_show(struct seq_file *seq, void *v) -{ - int i = 0; - unsigned long off; - struct visor_vbus_deviceinfo dev_info; - struct visor_device *vdev = seq->private; - struct visorchannel *channel = vdev->visorchannel; - - if (!channel) - return 0; - - seq_printf(seq, - "Client device/driver info for %s partition (vbus #%u):\n", - ((vdev->name) ? (char *)(vdev->name) : ""), - vdev->chipset_bus_no); - if (visorchannel_read(channel, - offsetof(struct visor_vbus_channel, chp_info), - &dev_info, sizeof(dev_info)) >= 0) - vbuschannel_print_devinfo(&dev_info, seq, -1); - if (visorchannel_read(channel, - offsetof(struct visor_vbus_channel, bus_info), - &dev_info, sizeof(dev_info)) >= 0) - vbuschannel_print_devinfo(&dev_info, seq, -1); - - off = offsetof(struct visor_vbus_channel, dev_info); - while (off + sizeof(dev_info) <= visorchannel_get_nbytes(channel)) { - if (visorchannel_read(channel, off, &dev_info, - sizeof(dev_info)) >= 0) - vbuschannel_print_devinfo(&dev_info, seq, i); - off += sizeof(dev_info); - i++; - } - return 0; -} - -static int bus_info_debugfs_open(struct inode *inode, struct file *file) -{ - return single_open(file, bus_info_debugfs_show, inode->i_private); -} - -static const struct file_operations bus_info_debugfs_fops = { - .owner = THIS_MODULE, - .open = bus_info_debugfs_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static void dev_periodic_work(struct timer_list *t) -{ - struct visor_device *dev = from_timer(dev, t, timer); - struct visor_driver *drv = to_visor_driver(dev->device.driver); - - drv->channel_interrupt(dev); - mod_timer(&dev->timer, jiffies + POLLJIFFIES_NORMALCHANNEL); -} - -static int dev_start_periodic_work(struct visor_device *dev) -{ - if (dev->being_removed || dev->timer_active) - return -EINVAL; - - /* now up by at least 2 */ - get_device(&dev->device); - dev->timer.expires = jiffies + POLLJIFFIES_NORMALCHANNEL; - add_timer(&dev->timer); - dev->timer_active = true; - return 0; -} - -static void dev_stop_periodic_work(struct visor_device *dev) -{ - if (!dev->timer_active) - return; - - del_timer_sync(&dev->timer); - dev->timer_active = false; - put_device(&dev->device); -} - -/* - * visordriver_remove_device() - handle visor device going away - * @xdev: struct device for the visor device being removed - * - * This is called when device_unregister() is called for each child device - * instance, to notify the appropriate visorbus function driver that the device - * is going away, and to decrease the reference count of the device. - * - * Return: 0 iff successful - */ -static int visordriver_remove_device(struct device *xdev) -{ - struct visor_device *dev = to_visor_device(xdev); - struct visor_driver *drv = to_visor_driver(xdev->driver); - - mutex_lock(&dev->visordriver_callback_lock); - dev->being_removed = true; - drv->remove(dev); - mutex_unlock(&dev->visordriver_callback_lock); - dev_stop_periodic_work(dev); - put_device(&dev->device); - return 0; -} - -/* - * visorbus_unregister_visor_driver() - unregisters the provided driver - * @drv: the driver to unregister - * - * A visor function driver calls this function to unregister the driver, - * i.e., within its module_exit function. - */ -void visorbus_unregister_visor_driver(struct visor_driver *drv) -{ - driver_unregister(&drv->driver); -} -EXPORT_SYMBOL_GPL(visorbus_unregister_visor_driver); - -/* - * visorbus_read_channel() - reads from the designated channel into - * the provided buffer - * @dev: the device whose channel is read from - * @offset: the offset into the channel at which reading starts - * @dest: the destination buffer that is written into from the channel - * @nbytes: the number of bytes to read from the channel - * - * If receiving a message, use the visorchannel_signalremove() function instead. - * - * Return: integer indicating success (zero) or failure (non-zero) - */ -int visorbus_read_channel(struct visor_device *dev, unsigned long offset, - void *dest, unsigned long nbytes) -{ - return visorchannel_read(dev->visorchannel, offset, dest, nbytes); -} -EXPORT_SYMBOL_GPL(visorbus_read_channel); - -/* - * visorbus_write_channel() - writes the provided buffer into the designated - * channel - * @dev: the device whose channel is written to - * @offset: the offset into the channel at which writing starts - * @src: the source buffer that is written into the channel - * @nbytes: the number of bytes to write into the channel - * - * If sending a message, use the visorchannel_signalinsert() function instead. - * - * Return: integer indicating success (zero) or failure (non-zero) - */ -int visorbus_write_channel(struct visor_device *dev, unsigned long offset, - void *src, unsigned long nbytes) -{ - return visorchannel_write(dev->visorchannel, offset, src, nbytes); -} -EXPORT_SYMBOL_GPL(visorbus_write_channel); - -/* - * visorbus_enable_channel_interrupts() - enables interrupts on the - * designated device - * @dev: the device on which to enable interrupts - * - * Currently we don't yet have a real interrupt, so for now we just call the - * interrupt function periodically via a timer. - */ -int visorbus_enable_channel_interrupts(struct visor_device *dev) -{ - struct visor_driver *drv = to_visor_driver(dev->device.driver); - - if (!drv->channel_interrupt) { - dev_err(&dev->device, "%s no interrupt function!\n", __func__); - return -ENOENT; - } - - return dev_start_periodic_work(dev); -} -EXPORT_SYMBOL_GPL(visorbus_enable_channel_interrupts); - -/* - * visorbus_disable_channel_interrupts() - disables interrupts on the - * designated device - * @dev: the device on which to disable interrupts - */ -void visorbus_disable_channel_interrupts(struct visor_device *dev) -{ - dev_stop_periodic_work(dev); -} -EXPORT_SYMBOL_GPL(visorbus_disable_channel_interrupts); - -/* - * create_visor_device() - create visor device as a result of receiving the - * controlvm device_create message for a new device - * @dev: a freshly-zeroed struct visor_device, containing only filled-in values - * for chipset_bus_no and chipset_dev_no, that will be initialized - * - * This is how everything starts from the device end. - * This function is called when a channel first appears via a ControlVM - * message. In response, this function allocates a visor_device to correspond - * to the new channel, and attempts to connect it the appropriate * driver. If - * the appropriate driver is found, the visor_driver.probe() function for that - * driver will be called, and will be passed the new * visor_device that we - * just created. - * - * It's ok if the appropriate driver is not yet loaded, because in that case - * the new device struct will just stick around in the bus' list of devices. - * When the appropriate driver calls visorbus_register_visor_driver(), the - * visor_driver.probe() for the new driver will be called with the new device. - * - * Return: 0 if successful, otherwise the negative value returned by - * device_add() indicating the reason for failure - */ -int create_visor_device(struct visor_device *dev) -{ - int err; - u32 chipset_bus_no = dev->chipset_bus_no; - u32 chipset_dev_no = dev->chipset_dev_no; - - mutex_init(&dev->visordriver_callback_lock); - dev->device.bus = &visorbus_type; - dev->device.groups = channel_groups; - device_initialize(&dev->device); - dev->device.release = visorbus_release_device; - /* keep a reference just for us (now 2) */ - get_device(&dev->device); - timer_setup(&dev->timer, dev_periodic_work, 0); - /* - * bus_id must be a unique name with respect to this bus TYPE (NOT bus - * instance). That's why we need to include the bus number within the - * name. - */ - err = dev_set_name(&dev->device, "vbus%u:dev%u", - chipset_bus_no, chipset_dev_no); - if (err) - goto err_put; - /* - * device_add does this: - * bus_add_device(dev) - * ->device_attach(dev) - * ->for each driver drv registered on the bus that dev is on - * if (dev.drv) ** device already has a driver ** - * ** not sure we could ever get here... ** - * else - * if (bus.match(dev,drv)) [visorbus_match] - * dev.drv = drv - * if (!drv.probe(dev)) [visordriver_probe_device] - * dev.drv = NULL - * - * Note that device_add does NOT fail if no driver failed to claim the - * device. The device will be linked onto bus_type.klist_devices - * regardless (use bus_for_each_dev). - */ - err = device_add(&dev->device); - if (err < 0) - goto err_put; - list_add_tail(&dev->list_all, &list_all_device_instances); - dev->state.created = 1; - visorbus_response(dev, err, CONTROLVM_DEVICE_CREATE); - /* success: reference kept via unmatched get_device() */ - return 0; - -err_put: - put_device(&dev->device); - dev_err(&dev->device, "Creating visor device failed. %d\n", err); - return err; -} - -void remove_visor_device(struct visor_device *dev) -{ - list_del(&dev->list_all); - put_device(&dev->device); - if (dev->pending_msg_hdr) - visorbus_response(dev, 0, CONTROLVM_DEVICE_DESTROY); - device_unregister(&dev->device); -} - -static int get_vbus_header_info(struct visorchannel *chan, - struct device *dev, - struct visor_vbus_headerinfo *hdr_info) -{ - int err; - - if (!visor_check_channel(visorchannel_get_header(chan), - dev, - &visor_vbus_channel_guid, - "vbus", - sizeof(struct visor_vbus_channel), - VISOR_VBUS_CHANNEL_VERSIONID, - VISOR_CHANNEL_SIGNATURE)) - return -EINVAL; - - err = visorchannel_read(chan, sizeof(struct channel_header), hdr_info, - sizeof(*hdr_info)); - if (err < 0) - return err; - if (hdr_info->struct_bytes < sizeof(struct visor_vbus_headerinfo)) - return -EINVAL; - if (hdr_info->device_info_struct_bytes < - sizeof(struct visor_vbus_deviceinfo)) - return -EINVAL; - return 0; -} - -/* - * write_vbus_chp_info() - write the contents of to the struct - * visor_vbus_channel.chp_info - * @chan: indentifies the s-Par channel that will be updated - * @hdr_info: used to find appropriate channel offset to write data - * @info: contains the information to write - * - * Writes chipset info into the channel memory to be used for diagnostic - * purposes. - * - * Returns no value since this is debug information and not needed for - * device functionality. - */ -static void write_vbus_chp_info(struct visorchannel *chan, - struct visor_vbus_headerinfo *hdr_info, - struct visor_vbus_deviceinfo *info) -{ - int off; - - if (hdr_info->chp_info_offset == 0) - return; - - off = sizeof(struct channel_header) + hdr_info->chp_info_offset; - visorchannel_write(chan, off, info, sizeof(*info)); -} - -/* - * write_vbus_bus_info() - write the contents of to the struct - * visor_vbus_channel.bus_info - * @chan: indentifies the s-Par channel that will be updated - * @hdr_info: used to find appropriate channel offset to write data - * @info: contains the information to write - * - * Writes bus info into the channel memory to be used for diagnostic - * purposes. - * - * Returns no value since this is debug information and not needed for - * device functionality. - */ -static void write_vbus_bus_info(struct visorchannel *chan, - struct visor_vbus_headerinfo *hdr_info, - struct visor_vbus_deviceinfo *info) -{ - int off; - - if (hdr_info->bus_info_offset == 0) - return; - - off = sizeof(struct channel_header) + hdr_info->bus_info_offset; - visorchannel_write(chan, off, info, sizeof(*info)); -} - -/* - * write_vbus_dev_info() - write the contents of to the struct - * visor_vbus_channel.dev_info[] - * @chan: indentifies the s-Par channel that will be updated - * @hdr_info: used to find appropriate channel offset to write data - * @info: contains the information to write - * @devix: the relative device number (0..n-1) of the device on the bus - * - * Writes device info into the channel memory to be used for diagnostic - * purposes. - * - * Returns no value since this is debug information and not needed for - * device functionality. - */ -static void write_vbus_dev_info(struct visorchannel *chan, - struct visor_vbus_headerinfo *hdr_info, - struct visor_vbus_deviceinfo *info, - unsigned int devix) -{ - int off; - - if (hdr_info->dev_info_offset == 0) - return; - off = (sizeof(struct channel_header) + hdr_info->dev_info_offset) + - (hdr_info->device_info_struct_bytes * devix); - visorchannel_write(chan, off, info, sizeof(*info)); -} - -static void bus_device_info_init( - struct visor_vbus_deviceinfo *bus_device_info_ptr, - const char *dev_type, const char *drv_name) -{ - memset(bus_device_info_ptr, 0, sizeof(struct visor_vbus_deviceinfo)); - snprintf(bus_device_info_ptr->devtype, - sizeof(bus_device_info_ptr->devtype), - "%s", (dev_type) ? dev_type : "unknownType"); - snprintf(bus_device_info_ptr->drvname, - sizeof(bus_device_info_ptr->drvname), - "%s", (drv_name) ? drv_name : "unknownDriver"); - snprintf(bus_device_info_ptr->infostrs, - sizeof(bus_device_info_ptr->infostrs), "kernel ver. %s", - utsname()->release); -} - -/* - * publish_vbus_dev_info() - for a child device just created on a client bus, - * fill in information about the driver that is - * controlling this device into the appropriate slot - * within the vbus channel of the bus instance - * @visordev: struct visor_device for the desired device - */ -static void publish_vbus_dev_info(struct visor_device *visordev) -{ - int i; - struct visor_device *bdev; - struct visor_driver *visordrv; - u32 bus_no = visordev->chipset_bus_no; - u32 dev_no = visordev->chipset_dev_no; - struct visor_vbus_deviceinfo dev_info; - const char *chan_type_name = NULL; - struct visor_vbus_headerinfo *hdr_info; - - if (!visordev->device.driver) - return; - bdev = visorbus_get_device_by_id(bus_no, BUS_ROOT_DEVICE, NULL); - if (!bdev) - return; - hdr_info = (struct visor_vbus_headerinfo *)bdev->vbus_hdr_info; - if (!hdr_info) - return; - visordrv = to_visor_driver(visordev->device.driver); - - /* - * Within the list of device types (by GUID) that the driver - * says it supports, find out which one of those types matches - * the type of this device, so that we can include the device - * type name - */ - for (i = 0; visordrv->channel_types[i].name; i++) { - if (guid_equal(&visordrv->channel_types[i].guid, - &visordev->channel_type_guid)) { - chan_type_name = visordrv->channel_types[i].name; - break; - } - } - bus_device_info_init(&dev_info, chan_type_name, visordrv->name); - write_vbus_dev_info(bdev->visorchannel, hdr_info, &dev_info, dev_no); - write_vbus_chp_info(bdev->visorchannel, hdr_info, &chipset_driverinfo); - write_vbus_bus_info(bdev->visorchannel, hdr_info, - &clientbus_driverinfo); -} - -/* - * visordriver_probe_device() - handle new visor device coming online - * @xdev: struct device for the visor device being probed - * - * This is called automatically upon adding a visor_device (device_add), or - * adding a visor_driver (visorbus_register_visor_driver), but only after - * visorbus_match() has returned 1 to indicate a successful match between - * driver and device. - * - * If successful, a reference to the device will be held onto via get_device(). - * - * Return: 0 if successful, meaning the function driver's probe() function - * was successful with this device, otherwise a negative errno - * value indicating failure reason - */ -static int visordriver_probe_device(struct device *xdev) -{ - int err; - struct visor_driver *drv = to_visor_driver(xdev->driver); - struct visor_device *dev = to_visor_device(xdev); - - mutex_lock(&dev->visordriver_callback_lock); - dev->being_removed = false; - err = drv->probe(dev); - if (err) { - mutex_unlock(&dev->visordriver_callback_lock); - return err; - } - /* success: reference kept via unmatched get_device() */ - get_device(&dev->device); - publish_vbus_dev_info(dev); - mutex_unlock(&dev->visordriver_callback_lock); - return 0; -} - -/* - * visorbus_register_visor_driver() - registers the provided visor driver for - * handling one or more visor device - * types (channel_types) - * @drv: the driver to register - * - * A visor function driver calls this function to register the driver. The - * caller MUST fill in the following fields within the #drv structure: - * name, version, owner, channel_types, probe, remove - * - * Here's how the whole Linux bus / driver / device model works. - * - * At system start-up, the visorbus kernel module is loaded, which registers - * visorbus_type as a bus type, using bus_register(). - * - * All kernel modules that support particular device types on a - * visorbus bus are loaded. Each of these kernel modules calls - * visorbus_register_visor_driver() in their init functions, passing a - * visor_driver struct. visorbus_register_visor_driver() in turn calls - * register_driver(&visor_driver.driver). This .driver member is - * initialized with generic methods (like probe), whose sole responsibility - * is to act as a broker for the real methods, which are within the - * visor_driver struct. (This is the way the subclass behavior is - * implemented, since visor_driver is essentially a subclass of the - * generic driver.) Whenever a driver_register() happens, core bus code in - * the kernel does (see device_attach() in drivers/base/dd.c): - * - * for each dev associated with the bus (the bus that driver is on) that - * does not yet have a driver - * if bus.match(dev,newdriver) == yes_matched ** .match specified - * ** during bus_register(). - * newdriver.probe(dev) ** for visor drivers, this will call - * ** the generic driver.probe implemented in visorbus.c, - * ** which in turn calls the probe specified within the - * ** struct visor_driver (which was specified by the - * ** actual device driver as part of - * ** visorbus_register_visor_driver()). - * - * The above dance also happens when a new device appears. - * So the question is, how are devices created within the system? - * Basically, just call device_add(dev). See pci_bus_add_devices(). - * pci_scan_device() shows an example of how to build a device struct. It - * returns the newly-created struct to pci_scan_single_device(), who adds it - * to the list of devices at PCIBUS.devices. That list of devices is what - * is traversed by pci_bus_add_devices(). - * - * Return: integer indicating success (zero) or failure (non-zero) - */ -int visorbus_register_visor_driver(struct visor_driver *drv) -{ - /* can't register on a nonexistent bus */ - if (!initialized) - return -ENODEV; - if (!drv->probe) - return -EINVAL; - if (!drv->remove) - return -EINVAL; - if (!drv->pause) - return -EINVAL; - if (!drv->resume) - return -EINVAL; - - drv->driver.name = drv->name; - drv->driver.bus = &visorbus_type; - drv->driver.probe = visordriver_probe_device; - drv->driver.remove = visordriver_remove_device; - drv->driver.owner = drv->owner; - /* - * driver_register does this: - * bus_add_driver(drv) - * ->if (drv.bus) ** (bus_type) ** - * driver_attach(drv) - * for each dev with bus type of drv.bus - * if (!dev.drv) ** no driver assigned yet ** - * if (bus.match(dev,drv)) [visorbus_match] - * dev.drv = drv - * if (!drv.probe(dev)) [visordriver_probe_device] - * dev.drv = NULL - */ - return driver_register(&drv->driver); -} -EXPORT_SYMBOL_GPL(visorbus_register_visor_driver); - -/* - * visorbus_create_instance() - create a device instance for the visorbus itself - * @dev: struct visor_device indicating the bus instance - * - * Return: 0 for success, otherwise negative errno value indicating reason for - * failure - */ -int visorbus_create_instance(struct visor_device *dev) -{ - int id = dev->chipset_bus_no; - int err; - struct visor_vbus_headerinfo *hdr_info; - - hdr_info = kzalloc(sizeof(*hdr_info), GFP_KERNEL); - if (!hdr_info) - return -ENOMEM; - dev_set_name(&dev->device, "visorbus%d", id); - dev->device.bus = &visorbus_type; - dev->device.groups = visorbus_groups; - dev->device.release = visorbus_release_busdevice; - dev->debugfs_dir = debugfs_create_dir(dev_name(&dev->device), - visorbus_debugfs_dir); - dev->debugfs_bus_info = debugfs_create_file("client_bus_info", 0440, - dev->debugfs_dir, dev, - &bus_info_debugfs_fops); - dev_set_drvdata(&dev->device, dev); - err = get_vbus_header_info(dev->visorchannel, &dev->device, hdr_info); - if (err < 0) - goto err_debugfs_dir; - err = device_register(&dev->device); - if (err < 0) - goto err_debugfs_dir; - list_add_tail(&dev->list_all, &list_all_bus_instances); - dev->state.created = 1; - dev->vbus_hdr_info = (void *)hdr_info; - write_vbus_chp_info(dev->visorchannel, hdr_info, &chipset_driverinfo); - write_vbus_bus_info(dev->visorchannel, hdr_info, &clientbus_driverinfo); - visorbus_response(dev, err, CONTROLVM_BUS_CREATE); - return 0; - -err_debugfs_dir: - debugfs_remove_recursive(dev->debugfs_dir); - kfree(hdr_info); - dev_err(&dev->device, "%s failed: %d\n", __func__, err); - return err; -} - -/* - * visorbus_remove_instance() - remove a device instance for the visorbus itself - * @dev: struct visor_device indentifying the bus to remove - */ -void visorbus_remove_instance(struct visor_device *dev) -{ - /* - * Note that this will result in the release method for - * dev->dev being called, which will call - * visorbus_release_busdevice(). This has something to do with - * the put_device() done in device_unregister(), but I have never - * successfully been able to trace thru the code to see where/how - * release() gets called. But I know it does. - */ - kfree(dev->vbus_hdr_info); - list_del(&dev->list_all); - if (dev->pending_msg_hdr) - visorbus_response(dev, 0, CONTROLVM_BUS_DESTROY); - device_unregister(&dev->device); -} - -/* - * remove_all_visor_devices() - remove all child visorbus device instances - */ -static void remove_all_visor_devices(void) -{ - struct list_head *listentry, *listtmp; - - list_for_each_safe(listentry, listtmp, &list_all_device_instances) { - struct visor_device *dev; - - dev = list_entry(listentry, struct visor_device, list_all); - remove_visor_device(dev); - } -} - -/* - * pause_state_change_complete() - the callback function to be called by a - * visorbus function driver when a - * pending "pause device" operation has - * completed - * @dev: struct visor_device identifying the paused device - * @status: 0 iff the pause state change completed successfully, otherwise - * a negative errno value indicating the reason for failure - */ -static void pause_state_change_complete(struct visor_device *dev, int status) -{ - if (!dev->pausing) - return; - - dev->pausing = false; - visorbus_device_changestate_response(dev, status, - segment_state_standby); -} - -/* - * resume_state_change_complete() - the callback function to be called by a - * visorbus function driver when a - * pending "resume device" operation has - * completed - * @dev: struct visor_device identifying the resumed device - * @status: 0 iff the resume state change completed successfully, otherwise - * a negative errno value indicating the reason for failure - */ -static void resume_state_change_complete(struct visor_device *dev, int status) -{ - if (!dev->resuming) - return; - - dev->resuming = false; - /* - * Notify the chipset driver that the resume is complete, - * which will presumably want to send some sort of response to - * the initiator. - */ - visorbus_device_changestate_response(dev, status, - segment_state_running); -} - -/* - * visorchipset_initiate_device_pause_resume() - start a pause or resume - * operation for a visor device - * @dev: struct visor_device identifying the device being paused or resumed - * @is_pause: true to indicate pause operation, false to indicate resume - * - * Tell the subordinate function driver for a specific device to pause - * or resume that device. Success/failure result is returned asynchronously - * via a callback function; see pause_state_change_complete() and - * resume_state_change_complete(). - */ -static int visorchipset_initiate_device_pause_resume(struct visor_device *dev, - bool is_pause) -{ - int err; - struct visor_driver *drv; - - /* If no driver associated with the device nothing to pause/resume */ - if (!dev->device.driver) - return 0; - if (dev->pausing || dev->resuming) - return -EBUSY; - - drv = to_visor_driver(dev->device.driver); - if (is_pause) { - dev->pausing = true; - err = drv->pause(dev, pause_state_change_complete); - } else { - /* - * The vbus_dev_info structure in the channel was been cleared, - * make sure it is valid. - */ - publish_vbus_dev_info(dev); - dev->resuming = true; - err = drv->resume(dev, resume_state_change_complete); - } - return err; -} - -/* - * visorchipset_device_pause() - start a pause operation for a visor device - * @dev_info: struct visor_device identifying the device being paused - * - * Tell the subordinate function driver for a specific device to pause - * that device. Success/failure result is returned asynchronously - * via a callback function; see pause_state_change_complete(). - */ -int visorchipset_device_pause(struct visor_device *dev_info) -{ - int err; - - err = visorchipset_initiate_device_pause_resume(dev_info, true); - if (err < 0) { - dev_info->pausing = false; - return err; - } - return 0; -} - -/* - * visorchipset_device_resume() - start a resume operation for a visor device - * @dev_info: struct visor_device identifying the device being resumed - * - * Tell the subordinate function driver for a specific device to resume - * that device. Success/failure result is returned asynchronously - * via a callback function; see resume_state_change_complete(). - */ -int visorchipset_device_resume(struct visor_device *dev_info) -{ - int err; - - err = visorchipset_initiate_device_pause_resume(dev_info, false); - if (err < 0) { - dev_info->resuming = false; - return err; - } - return 0; -} - -int visorbus_init(void) -{ - int err; - - visorbus_debugfs_dir = debugfs_create_dir("visorbus", NULL); - bus_device_info_init(&clientbus_driverinfo, "clientbus", "visorbus"); - err = bus_register(&visorbus_type); - if (err < 0) - return err; - initialized = true; - bus_device_info_init(&chipset_driverinfo, "chipset", "visorchipset"); - return 0; -} - -void visorbus_exit(void) -{ - struct list_head *listentry, *listtmp; - - remove_all_visor_devices(); - list_for_each_safe(listentry, listtmp, &list_all_bus_instances) { - struct visor_device *dev; - - dev = list_entry(listentry, struct visor_device, list_all); - visorbus_remove_instance(dev); - } - bus_unregister(&visorbus_type); - initialized = false; - debugfs_remove_recursive(visorbus_debugfs_dir); -} diff --git a/drivers/visorbus/visorbus_private.h b/drivers/visorbus/visorbus_private.h deleted file mode 100644 index 6956de605827..000000000000 --- a/drivers/visorbus/visorbus_private.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#ifndef __VISORBUS_PRIVATE_H__ -#define __VISORBUS_PRIVATE_H__ - -#include -#include -#include - -#include "controlvmchannel.h" -#include "vbuschannel.h" - -struct visor_device *visorbus_get_device_by_id(u32 bus_no, u32 dev_no, - struct visor_device *from); -int visorbus_create_instance(struct visor_device *dev); -void visorbus_remove_instance(struct visor_device *bus_info); -int create_visor_device(struct visor_device *dev_info); -void remove_visor_device(struct visor_device *dev_info); -int visorchipset_device_pause(struct visor_device *dev_info); -int visorchipset_device_resume(struct visor_device *dev_info); -void visorbus_response(struct visor_device *p, int response, int controlvm_id); -void visorbus_device_changestate_response(struct visor_device *p, int response, - struct visor_segment_state state); -int visorbus_init(void); -void visorbus_exit(void); - -/* visorchannel access functions */ -struct visorchannel *visorchannel_create(u64 physaddr, gfp_t gfp, - const guid_t *guid, bool needs_lock); -void visorchannel_destroy(struct visorchannel *channel); -int visorchannel_read(struct visorchannel *channel, ulong offset, - void *dest, ulong nbytes); -int visorchannel_write(struct visorchannel *channel, ulong offset, - void *dest, ulong nbytes); -u64 visorchannel_get_physaddr(struct visorchannel *channel); -ulong visorchannel_get_nbytes(struct visorchannel *channel); -char *visorchannel_id(struct visorchannel *channel, char *s); -char *visorchannel_zoneid(struct visorchannel *channel, char *s); -u64 visorchannel_get_clientpartition(struct visorchannel *channel); -int visorchannel_set_clientpartition(struct visorchannel *channel, - u64 partition_handle); -char *visorchannel_guid_id(const guid_t *guid, char *s); -void *visorchannel_get_header(struct visorchannel *channel); -#endif diff --git a/drivers/visorbus/visorchannel.c b/drivers/visorbus/visorchannel.c deleted file mode 100644 index bd890e0f456b..000000000000 --- a/drivers/visorbus/visorchannel.c +++ /dev/null @@ -1,434 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -/* - * This provides s-Par channel communication primitives, which are - * independent of the mechanism used to access the channel data. - */ - -#include -#include -#include -#include - -#include "visorbus_private.h" -#include "controlvmchannel.h" - -#define VISOR_DRV_NAME "visorchannel" - -#define VISOR_CONSOLEVIDEO_CHANNEL_GUID \ - GUID_INIT(0x3cd6e705, 0xd6a2, 0x4aa5, \ - 0xad, 0x5c, 0x7b, 0x8, 0x88, 0x9d, 0xff, 0xe2) - -static const guid_t visor_video_guid = VISOR_CONSOLEVIDEO_CHANNEL_GUID; - -struct visorchannel { - u64 physaddr; - ulong nbytes; - void *mapped; - bool requested; - struct channel_header chan_hdr; - guid_t guid; - /* - * channel creator knows if more than one thread will be inserting or - * removing - */ - bool needs_lock; - /* protect head writes in chan_hdr */ - spinlock_t insert_lock; - /* protect tail writes in chan_hdr */ - spinlock_t remove_lock; - guid_t type; - guid_t inst; -}; - -void visorchannel_destroy(struct visorchannel *channel) -{ - if (!channel) - return; - - if (channel->mapped) { - memunmap(channel->mapped); - if (channel->requested) - release_mem_region(channel->physaddr, channel->nbytes); - } - kfree(channel); -} - -u64 visorchannel_get_physaddr(struct visorchannel *channel) -{ - return channel->physaddr; -} - -ulong visorchannel_get_nbytes(struct visorchannel *channel) -{ - return channel->nbytes; -} - -char *visorchannel_guid_id(const guid_t *guid, char *s) -{ - sprintf(s, "%pUL", guid); - return s; -} - -char *visorchannel_id(struct visorchannel *channel, char *s) -{ - return visorchannel_guid_id(&channel->guid, s); -} - -char *visorchannel_zoneid(struct visorchannel *channel, char *s) -{ - return visorchannel_guid_id(&channel->chan_hdr.zone_guid, s); -} - -u64 visorchannel_get_clientpartition(struct visorchannel *channel) -{ - return channel->chan_hdr.partition_handle; -} - -int visorchannel_set_clientpartition(struct visorchannel *channel, - u64 partition_handle) -{ - channel->chan_hdr.partition_handle = partition_handle; - return 0; -} - -/** - * visorchannel_get_guid() - queries the GUID of the designated channel - * @channel: the channel to query - * - * Return: the GUID of the provided channel - */ -const guid_t *visorchannel_get_guid(struct visorchannel *channel) -{ - return &channel->guid; -} -EXPORT_SYMBOL_GPL(visorchannel_get_guid); - -int visorchannel_read(struct visorchannel *channel, ulong offset, void *dest, - ulong nbytes) -{ - if (offset + nbytes > channel->nbytes) - return -EIO; - - memcpy(dest, channel->mapped + offset, nbytes); - return 0; -} - -int visorchannel_write(struct visorchannel *channel, ulong offset, void *dest, - ulong nbytes) -{ - size_t chdr_size = sizeof(struct channel_header); - size_t copy_size; - - if (offset + nbytes > channel->nbytes) - return -EIO; - - if (offset < chdr_size) { - copy_size = min(chdr_size - offset, nbytes); - memcpy(((char *)(&channel->chan_hdr)) + offset, - dest, copy_size); - } - memcpy(channel->mapped + offset, dest, nbytes); - return 0; -} - -void *visorchannel_get_header(struct visorchannel *channel) -{ - return &channel->chan_hdr; -} - -/* - * Return offset of a specific SIGNAL_QUEUE_HEADER from the beginning of a - * channel header - */ -static int sig_queue_offset(struct channel_header *chan_hdr, int q) -{ - return ((chan_hdr)->ch_space_offset + - ((q) * sizeof(struct signal_queue_header))); -} - -/* - * Return offset of a specific queue entry (data) from the beginning of a - * channel header - */ -static int sig_data_offset(struct channel_header *chan_hdr, int q, - struct signal_queue_header *sig_hdr, int slot) -{ - return (sig_queue_offset(chan_hdr, q) + sig_hdr->sig_base_offset + - (slot * sig_hdr->signal_size)); -} - -/* - * Write the contents of a specific field within a SIGNAL_QUEUE_HEADER back into - * host memory - */ -#define SIG_WRITE_FIELD(channel, queue, sig_hdr, FIELD) \ - visorchannel_write(channel, \ - sig_queue_offset(&channel->chan_hdr, queue) + \ - offsetof(struct signal_queue_header, FIELD), \ - &((sig_hdr)->FIELD), \ - sizeof((sig_hdr)->FIELD)) - -static int sig_read_header(struct visorchannel *channel, u32 queue, - struct signal_queue_header *sig_hdr) -{ - if (channel->chan_hdr.ch_space_offset < sizeof(struct channel_header)) - return -EINVAL; - - /* Read the appropriate SIGNAL_QUEUE_HEADER into local memory. */ - return visorchannel_read(channel, - sig_queue_offset(&channel->chan_hdr, queue), - sig_hdr, sizeof(struct signal_queue_header)); -} - -static int sig_read_data(struct visorchannel *channel, u32 queue, - struct signal_queue_header *sig_hdr, u32 slot, - void *data) -{ - int signal_data_offset = sig_data_offset(&channel->chan_hdr, queue, - sig_hdr, slot); - - return visorchannel_read(channel, signal_data_offset, - data, sig_hdr->signal_size); -} - -static int sig_write_data(struct visorchannel *channel, u32 queue, - struct signal_queue_header *sig_hdr, u32 slot, - void *data) -{ - int signal_data_offset = sig_data_offset(&channel->chan_hdr, queue, - sig_hdr, slot); - - return visorchannel_write(channel, signal_data_offset, - data, sig_hdr->signal_size); -} - -static int signalremove_inner(struct visorchannel *channel, u32 queue, - void *msg) -{ - struct signal_queue_header sig_hdr; - int error; - - error = sig_read_header(channel, queue, &sig_hdr); - if (error) - return error; - /* No signals to remove; have caller try again. */ - if (sig_hdr.head == sig_hdr.tail) - return -EAGAIN; - sig_hdr.tail = (sig_hdr.tail + 1) % sig_hdr.max_slots; - error = sig_read_data(channel, queue, &sig_hdr, sig_hdr.tail, msg); - if (error) - return error; - sig_hdr.num_received++; - /* - * For each data field in SIGNAL_QUEUE_HEADER that was modified, update - * host memory. Required for channel sync. - */ - mb(); - error = SIG_WRITE_FIELD(channel, queue, &sig_hdr, tail); - if (error) - return error; - error = SIG_WRITE_FIELD(channel, queue, &sig_hdr, num_received); - if (error) - return error; - return 0; -} - -/** - * visorchannel_signalremove() - removes a message from the designated - * channel/queue - * @channel: the channel the message will be removed from - * @queue: the queue the message will be removed from - * @msg: the message to remove - * - * Return: integer error code indicating the status of the removal - */ -int visorchannel_signalremove(struct visorchannel *channel, u32 queue, - void *msg) -{ - int rc; - unsigned long flags; - - if (channel->needs_lock) { - spin_lock_irqsave(&channel->remove_lock, flags); - rc = signalremove_inner(channel, queue, msg); - spin_unlock_irqrestore(&channel->remove_lock, flags); - } else { - rc = signalremove_inner(channel, queue, msg); - } - - return rc; -} -EXPORT_SYMBOL_GPL(visorchannel_signalremove); - -static bool queue_empty(struct visorchannel *channel, u32 queue) -{ - struct signal_queue_header sig_hdr; - - if (sig_read_header(channel, queue, &sig_hdr)) - return true; - return (sig_hdr.head == sig_hdr.tail); -} - -/** - * visorchannel_signalempty() - checks if the designated channel/queue contains - * any messages - * @channel: the channel to query - * @queue: the queue in the channel to query - * - * Return: boolean indicating whether any messages in the designated - * channel/queue are present - */ -bool visorchannel_signalempty(struct visorchannel *channel, u32 queue) -{ - bool rc; - unsigned long flags; - - if (!channel->needs_lock) - return queue_empty(channel, queue); - spin_lock_irqsave(&channel->remove_lock, flags); - rc = queue_empty(channel, queue); - spin_unlock_irqrestore(&channel->remove_lock, flags); - return rc; -} -EXPORT_SYMBOL_GPL(visorchannel_signalempty); - -static int signalinsert_inner(struct visorchannel *channel, u32 queue, - void *msg) -{ - struct signal_queue_header sig_hdr; - int err; - - err = sig_read_header(channel, queue, &sig_hdr); - if (err) - return err; - sig_hdr.head = (sig_hdr.head + 1) % sig_hdr.max_slots; - if (sig_hdr.head == sig_hdr.tail) { - sig_hdr.num_overflows++; - err = SIG_WRITE_FIELD(channel, queue, &sig_hdr, num_overflows); - if (err) - return err; - return -EIO; - } - err = sig_write_data(channel, queue, &sig_hdr, sig_hdr.head, msg); - if (err) - return err; - sig_hdr.num_sent++; - /* - * For each data field in SIGNAL_QUEUE_HEADER that was modified, update - * host memory. Required for channel sync. - */ - mb(); - err = SIG_WRITE_FIELD(channel, queue, &sig_hdr, head); - if (err) - return err; - err = SIG_WRITE_FIELD(channel, queue, &sig_hdr, num_sent); - if (err) - return err; - return 0; -} - -/* - * visorchannel_create() - creates the struct visorchannel abstraction for a - * data area in memory, but does NOT modify this data - * area - * @physaddr: physical address of start of channel - * @gfp: gfp_t to use when allocating memory for the data struct - * @guid: GUID that identifies channel type; - * @needs_lock: must specify true if you have multiple threads of execution - * that will be calling visorchannel methods of this - * visorchannel at the same time - * - * Return: pointer to visorchannel that was created if successful, - * otherwise NULL - */ -struct visorchannel *visorchannel_create(u64 physaddr, gfp_t gfp, - const guid_t *guid, bool needs_lock) -{ - struct visorchannel *channel; - int err; - size_t size = sizeof(struct channel_header); - - if (physaddr == 0) - return NULL; - - channel = kzalloc(sizeof(*channel), gfp); - if (!channel) - return NULL; - channel->needs_lock = needs_lock; - spin_lock_init(&channel->insert_lock); - spin_lock_init(&channel->remove_lock); - /* - * Video driver constains the efi framebuffer so it will get a conflict - * resource when requesting its full mem region. Since we are only - * using the efi framebuffer for video we can ignore this. Remember that - * we haven't requested it so we don't try to release later on. - */ - channel->requested = request_mem_region(physaddr, size, VISOR_DRV_NAME); - if (!channel->requested && !guid_equal(guid, &visor_video_guid)) - /* we only care about errors if this is not the video channel */ - goto err_destroy_channel; - channel->mapped = memremap(physaddr, size, MEMREMAP_WB); - if (!channel->mapped) { - release_mem_region(physaddr, size); - goto err_destroy_channel; - } - channel->physaddr = physaddr; - channel->nbytes = size; - err = visorchannel_read(channel, 0, &channel->chan_hdr, size); - if (err) - goto err_destroy_channel; - size = (ulong)channel->chan_hdr.size; - memunmap(channel->mapped); - if (channel->requested) - release_mem_region(channel->physaddr, channel->nbytes); - channel->mapped = NULL; - channel->requested = request_mem_region(channel->physaddr, size, - VISOR_DRV_NAME); - if (!channel->requested && !guid_equal(guid, &visor_video_guid)) - /* we only care about errors if this is not the video channel */ - goto err_destroy_channel; - channel->mapped = memremap(channel->physaddr, size, MEMREMAP_WB); - if (!channel->mapped) { - release_mem_region(channel->physaddr, size); - goto err_destroy_channel; - } - channel->nbytes = size; - guid_copy(&channel->guid, guid); - return channel; - -err_destroy_channel: - visorchannel_destroy(channel); - return NULL; -} - -/** - * visorchannel_signalinsert() - inserts a message into the designated - * channel/queue - * @channel: the channel the message will be added to - * @queue: the queue the message will be added to - * @msg: the message to insert - * - * Return: integer error code indicating the status of the insertion - */ -int visorchannel_signalinsert(struct visorchannel *channel, u32 queue, - void *msg) -{ - int rc; - unsigned long flags; - - if (channel->needs_lock) { - spin_lock_irqsave(&channel->insert_lock, flags); - rc = signalinsert_inner(channel, queue, msg); - spin_unlock_irqrestore(&channel->insert_lock, flags); - } else { - rc = signalinsert_inner(channel, queue, msg); - } - - return rc; -} -EXPORT_SYMBOL_GPL(visorchannel_signalinsert); diff --git a/drivers/visorbus/visorchipset.c b/drivers/visorbus/visorchipset.c deleted file mode 100644 index 5668cad86e37..000000000000 --- a/drivers/visorbus/visorchipset.c +++ /dev/null @@ -1,1691 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2010 - 2015 UNISYS CORPORATION - * All rights reserved. - */ - -#include -#include -#include - -#include "visorbus_private.h" - -/* {72120008-4AAB-11DC-8530-444553544200} */ -#define VISOR_SIOVM_GUID GUID_INIT(0x72120008, 0x4AAB, 0x11DC, 0x85, 0x30, \ - 0x44, 0x45, 0x53, 0x54, 0x42, 0x00) - -static const guid_t visor_vhba_channel_guid = VISOR_VHBA_CHANNEL_GUID; -static const guid_t visor_siovm_guid = VISOR_SIOVM_GUID; -static const guid_t visor_controlvm_channel_guid = VISOR_CONTROLVM_CHANNEL_GUID; - -#define POLLJIFFIES_CONTROLVM_FAST 1 -#define POLLJIFFIES_CONTROLVM_SLOW 100 - -#define MAX_CONTROLVM_PAYLOAD_BYTES (1024 * 128) - -#define UNISYS_VISOR_LEAF_ID 0x40000000 - -/* The s-Par leaf ID returns "UnisysSpar64" encoded across ebx, ecx, edx */ -#define UNISYS_VISOR_ID_EBX 0x73696e55 -#define UNISYS_VISOR_ID_ECX 0x70537379 -#define UNISYS_VISOR_ID_EDX 0x34367261 - -/* - * When the controlvm channel is idle for at least MIN_IDLE_SECONDS, we switch - * to slow polling mode. As soon as we get a controlvm message, we switch back - * to fast polling mode. - */ -#define MIN_IDLE_SECONDS 10 - -struct parser_context { - unsigned long allocbytes; - unsigned long param_bytes; - u8 *curr; - unsigned long bytes_remaining; - bool byte_stream; - struct visor_controlvm_parameters_header data; -}; - -/* VMCALL_CONTROLVM_ADDR: Used by all guests, not just IO. */ -#define VMCALL_CONTROLVM_ADDR 0x0501 - -enum vmcall_result { - VMCALL_RESULT_SUCCESS = 0, - VMCALL_RESULT_INVALID_PARAM = 1, - VMCALL_RESULT_DATA_UNAVAILABLE = 2, - VMCALL_RESULT_FAILURE_UNAVAILABLE = 3, - VMCALL_RESULT_DEVICE_ERROR = 4, - VMCALL_RESULT_DEVICE_NOT_READY = 5 -}; - -/* - * struct vmcall_io_controlvm_addr_params - Structure for IO VMCALLS. Has - * parameters to VMCALL_CONTROLVM_ADDR - * interface. - * @address: The Guest-relative physical address of the ControlVm channel. - * This VMCall fills this in with the appropriate address. - * Contents provided by this VMCALL (OUT). - * @channel_bytes: The size of the ControlVm channel in bytes This VMCall fills - * this in with the appropriate address. Contents provided by - * this VMCALL (OUT). - * @unused: Unused Bytes in the 64-Bit Aligned Struct. - */ -struct vmcall_io_controlvm_addr_params { - u64 address; - u32 channel_bytes; - u8 unused[4]; -} __packed; - -struct visorchipset_device { - struct acpi_device *acpi_device; - unsigned long poll_jiffies; - /* when we got our last controlvm message */ - unsigned long most_recent_message_jiffies; - struct delayed_work periodic_controlvm_work; - struct visorchannel *controlvm_channel; - unsigned long controlvm_payload_bytes_buffered; - /* - * The following variables are used to handle the scenario where we are - * unable to offload the payload from a controlvm message due to memory - * requirements. In this scenario, we simply stash the controlvm - * message, then attempt to process it again the next time - * controlvm_periodic_work() runs. - */ - struct controlvm_message controlvm_pending_msg; - bool controlvm_pending_msg_valid; - struct vmcall_io_controlvm_addr_params controlvm_params; -}; - -static struct visorchipset_device *chipset_dev; - -struct parahotplug_request { - struct list_head list; - int id; - unsigned long expiration; - struct controlvm_message msg; -}; - -/* prototypes for attributes */ -static ssize_t toolaction_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - u8 tool_action = 0; - int err; - - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - tool_action), - &tool_action, sizeof(u8)); - if (err) - return err; - return sprintf(buf, "%u\n", tool_action); -} - -static ssize_t toolaction_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - u8 tool_action; - int err; - - if (kstrtou8(buf, 10, &tool_action)) - return -EINVAL; - err = visorchannel_write(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - tool_action), - &tool_action, sizeof(u8)); - if (err) - return err; - return count; -} -static DEVICE_ATTR_RW(toolaction); - -static ssize_t boottotool_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct efi_visor_indication efi_visor_indication; - int err; - - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - efi_visor_ind), - &efi_visor_indication, - sizeof(struct efi_visor_indication)); - if (err) - return err; - return sprintf(buf, "%u\n", efi_visor_indication.boot_to_tool); -} - -static ssize_t boottotool_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - int val, err; - struct efi_visor_indication efi_visor_indication; - - if (kstrtoint(buf, 10, &val)) - return -EINVAL; - efi_visor_indication.boot_to_tool = val; - err = visorchannel_write(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - efi_visor_ind), - &(efi_visor_indication), - sizeof(struct efi_visor_indication)); - if (err) - return err; - return count; -} -static DEVICE_ATTR_RW(boottotool); - -static ssize_t error_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - u32 error = 0; - int err; - - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - installation_error), - &error, sizeof(u32)); - if (err) - return err; - return sprintf(buf, "%u\n", error); -} - -static ssize_t error_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - u32 error; - int err; - - if (kstrtou32(buf, 10, &error)) - return -EINVAL; - err = visorchannel_write(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - installation_error), - &error, sizeof(u32)); - if (err) - return err; - return count; -} -static DEVICE_ATTR_RW(error); - -static ssize_t textid_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - u32 text_id = 0; - int err; - - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - installation_text_id), - &text_id, sizeof(u32)); - if (err) - return err; - return sprintf(buf, "%u\n", text_id); -} - -static ssize_t textid_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - u32 text_id; - int err; - - if (kstrtou32(buf, 10, &text_id)) - return -EINVAL; - err = visorchannel_write(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - installation_text_id), - &text_id, sizeof(u32)); - if (err) - return err; - return count; -} -static DEVICE_ATTR_RW(textid); - -static ssize_t remaining_steps_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - u16 remaining_steps = 0; - int err; - - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - installation_remaining_steps), - &remaining_steps, sizeof(u16)); - if (err) - return err; - return sprintf(buf, "%hu\n", remaining_steps); -} - -static ssize_t remaining_steps_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - u16 remaining_steps; - int err; - - if (kstrtou16(buf, 10, &remaining_steps)) - return -EINVAL; - err = visorchannel_write(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - installation_remaining_steps), - &remaining_steps, sizeof(u16)); - if (err) - return err; - return count; -} -static DEVICE_ATTR_RW(remaining_steps); - -static void controlvm_init_response(struct controlvm_message *msg, - struct controlvm_message_header *msg_hdr, - int response) -{ - memset(msg, 0, sizeof(struct controlvm_message)); - memcpy(&msg->hdr, msg_hdr, sizeof(struct controlvm_message_header)); - msg->hdr.payload_bytes = 0; - msg->hdr.payload_vm_offset = 0; - msg->hdr.payload_max_bytes = 0; - if (response < 0) { - msg->hdr.flags.failed = 1; - msg->hdr.completion_status = (u32)(-response); - } -} - -static int controlvm_respond_chipset_init( - struct controlvm_message_header *msg_hdr, - int response, - enum visor_chipset_feature features) -{ - struct controlvm_message outmsg; - - controlvm_init_response(&outmsg, msg_hdr, response); - outmsg.cmd.init_chipset.features = features; - return visorchannel_signalinsert(chipset_dev->controlvm_channel, - CONTROLVM_QUEUE_REQUEST, &outmsg); -} - -static int chipset_init(struct controlvm_message *inmsg) -{ - static int chipset_inited; - enum visor_chipset_feature features = 0; - int rc = CONTROLVM_RESP_SUCCESS; - int res = 0; - - if (chipset_inited) { - rc = -CONTROLVM_RESP_ALREADY_DONE; - res = -EIO; - goto out_respond; - } - chipset_inited = 1; - /* - * Set features to indicate we support parahotplug (if Command also - * supports it). Set the "reply" bit so Command knows this is a - * features-aware driver. - */ - features = inmsg->cmd.init_chipset.features & - VISOR_CHIPSET_FEATURE_PARA_HOTPLUG; - features |= VISOR_CHIPSET_FEATURE_REPLY; - -out_respond: - if (inmsg->hdr.flags.response_expected) - res = controlvm_respond_chipset_init(&inmsg->hdr, rc, features); - - return res; -} - -static int controlvm_respond(struct controlvm_message_header *msg_hdr, - int response, struct visor_segment_state *state) -{ - struct controlvm_message outmsg; - - controlvm_init_response(&outmsg, msg_hdr, response); - if (outmsg.hdr.flags.test_message == 1) - return -EINVAL; - if (state) { - outmsg.cmd.device_change_state.state = *state; - outmsg.cmd.device_change_state.flags.phys_device = 1; - } - return visorchannel_signalinsert(chipset_dev->controlvm_channel, - CONTROLVM_QUEUE_REQUEST, &outmsg); -} - -enum crash_obj_type { - CRASH_DEV, - CRASH_BUS, -}; - -static int save_crash_message(struct controlvm_message *msg, - enum crash_obj_type cr_type) -{ - u32 local_crash_msg_offset; - u16 local_crash_msg_count; - int err; - - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - saved_crash_message_count), - &local_crash_msg_count, sizeof(u16)); - if (err) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to read message count\n"); - return err; - } - if (local_crash_msg_count != CONTROLVM_CRASHMSG_MAX) { - dev_err(&chipset_dev->acpi_device->dev, - "invalid number of messages\n"); - return -EIO; - } - err = visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - saved_crash_message_offset), - &local_crash_msg_offset, sizeof(u32)); - if (err) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to read offset\n"); - return err; - } - switch (cr_type) { - case CRASH_DEV: - local_crash_msg_offset += sizeof(struct controlvm_message); - err = visorchannel_write(chipset_dev->controlvm_channel, - local_crash_msg_offset, msg, - sizeof(struct controlvm_message)); - if (err) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to write dev msg\n"); - return err; - } - break; - case CRASH_BUS: - err = visorchannel_write(chipset_dev->controlvm_channel, - local_crash_msg_offset, msg, - sizeof(struct controlvm_message)); - if (err) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to write bus msg\n"); - return err; - } - break; - default: - dev_err(&chipset_dev->acpi_device->dev, - "Invalid crash_obj_type\n"); - break; - } - return 0; -} - -static int controlvm_responder(enum controlvm_id cmd_id, - struct controlvm_message_header *pending_msg_hdr, - int response) -{ - if (pending_msg_hdr->id != (u32)cmd_id) - return -EINVAL; - - return controlvm_respond(pending_msg_hdr, response, NULL); -} - -static int device_changestate_responder(enum controlvm_id cmd_id, - struct visor_device *p, int response, - struct visor_segment_state state) -{ - struct controlvm_message outmsg; - - if (p->pending_msg_hdr->id != cmd_id) - return -EINVAL; - - controlvm_init_response(&outmsg, p->pending_msg_hdr, response); - outmsg.cmd.device_change_state.bus_no = p->chipset_bus_no; - outmsg.cmd.device_change_state.dev_no = p->chipset_dev_no; - outmsg.cmd.device_change_state.state = state; - return visorchannel_signalinsert(chipset_dev->controlvm_channel, - CONTROLVM_QUEUE_REQUEST, &outmsg); -} - -static int visorbus_create(struct controlvm_message *inmsg) -{ - struct controlvm_message_packet *cmd = &inmsg->cmd; - struct controlvm_message_header *pmsg_hdr; - u32 bus_no = cmd->create_bus.bus_no; - struct visor_device *bus_info; - struct visorchannel *visorchannel; - int err; - - bus_info = visorbus_get_device_by_id(bus_no, BUS_ROOT_DEVICE, NULL); - if (bus_info && bus_info->state.created == 1) { - dev_err(&chipset_dev->acpi_device->dev, - "failed %s: already exists\n", __func__); - err = -EEXIST; - goto err_respond; - } - bus_info = kzalloc(sizeof(*bus_info), GFP_KERNEL); - if (!bus_info) { - err = -ENOMEM; - goto err_respond; - } - INIT_LIST_HEAD(&bus_info->list_all); - bus_info->chipset_bus_no = bus_no; - bus_info->chipset_dev_no = BUS_ROOT_DEVICE; - if (guid_equal(&cmd->create_bus.bus_inst_guid, &visor_siovm_guid)) { - err = save_crash_message(inmsg, CRASH_BUS); - if (err) - goto err_free_bus_info; - } - if (inmsg->hdr.flags.response_expected == 1) { - pmsg_hdr = kzalloc(sizeof(*pmsg_hdr), GFP_KERNEL); - if (!pmsg_hdr) { - err = -ENOMEM; - goto err_free_bus_info; - } - memcpy(pmsg_hdr, &inmsg->hdr, - sizeof(struct controlvm_message_header)); - bus_info->pending_msg_hdr = pmsg_hdr; - } - visorchannel = visorchannel_create(cmd->create_bus.channel_addr, - GFP_KERNEL, - &cmd->create_bus.bus_data_type_guid, - false); - if (!visorchannel) { - err = -ENOMEM; - goto err_free_pending_msg; - } - bus_info->visorchannel = visorchannel; - /* Response will be handled by visorbus_create_instance on success */ - err = visorbus_create_instance(bus_info); - if (err) - goto err_destroy_channel; - return 0; - -err_destroy_channel: - visorchannel_destroy(visorchannel); - -err_free_pending_msg: - kfree(bus_info->pending_msg_hdr); - -err_free_bus_info: - kfree(bus_info); - -err_respond: - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return err; -} - -static int visorbus_destroy(struct controlvm_message *inmsg) -{ - struct controlvm_message_header *pmsg_hdr; - u32 bus_no = inmsg->cmd.destroy_bus.bus_no; - struct visor_device *bus_info; - int err; - - bus_info = visorbus_get_device_by_id(bus_no, BUS_ROOT_DEVICE, NULL); - if (!bus_info) { - err = -ENODEV; - goto err_respond; - } - if (bus_info->state.created == 0) { - err = -ENOENT; - goto err_respond; - } - if (bus_info->pending_msg_hdr) { - /* only non-NULL if dev is still waiting on a response */ - err = -EEXIST; - goto err_respond; - } - if (inmsg->hdr.flags.response_expected == 1) { - pmsg_hdr = kzalloc(sizeof(*pmsg_hdr), GFP_KERNEL); - if (!pmsg_hdr) { - err = -ENOMEM; - goto err_respond; - } - memcpy(pmsg_hdr, &inmsg->hdr, - sizeof(struct controlvm_message_header)); - bus_info->pending_msg_hdr = pmsg_hdr; - } - /* Response will be handled by visorbus_remove_instance */ - visorbus_remove_instance(bus_info); - return 0; - -err_respond: - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return err; -} - -static const guid_t *parser_id_get(struct parser_context *ctx) -{ - return &ctx->data.id; -} - -static void *parser_string_get(u8 *pscan, int nscan) -{ - int value_length; - void *value; - - if (nscan == 0) - return NULL; - - value_length = strnlen(pscan, nscan); - value = kzalloc(value_length + 1, GFP_KERNEL); - if (!value) - return NULL; - if (value_length > 0) - memcpy(value, pscan, value_length); - return value; -} - -static void *parser_name_get(struct parser_context *ctx) -{ - struct visor_controlvm_parameters_header *phdr; - - phdr = &ctx->data; - if ((unsigned long)phdr->name_offset + - (unsigned long)phdr->name_length > ctx->param_bytes) - return NULL; - ctx->curr = (char *)&phdr + phdr->name_offset; - ctx->bytes_remaining = phdr->name_length; - return parser_string_get(ctx->curr, phdr->name_length); -} - -static int visorbus_configure(struct controlvm_message *inmsg, - struct parser_context *parser_ctx) -{ - struct controlvm_message_packet *cmd = &inmsg->cmd; - u32 bus_no; - struct visor_device *bus_info; - int err = 0; - - bus_no = cmd->configure_bus.bus_no; - bus_info = visorbus_get_device_by_id(bus_no, BUS_ROOT_DEVICE, NULL); - if (!bus_info) { - err = -EINVAL; - goto err_respond; - } - if (bus_info->state.created == 0) { - err = -EINVAL; - goto err_respond; - } - if (bus_info->pending_msg_hdr) { - err = -EIO; - goto err_respond; - } - err = visorchannel_set_clientpartition(bus_info->visorchannel, - cmd->configure_bus.guest_handle); - if (err) - goto err_respond; - if (parser_ctx) { - const guid_t *partition_guid = parser_id_get(parser_ctx); - - guid_copy(&bus_info->partition_guid, partition_guid); - bus_info->name = parser_name_get(parser_ctx); - } - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return 0; - -err_respond: - dev_err(&chipset_dev->acpi_device->dev, - "%s exited with err: %d\n", __func__, err); - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return err; -} - -static int visorbus_device_create(struct controlvm_message *inmsg) -{ - struct controlvm_message_packet *cmd = &inmsg->cmd; - struct controlvm_message_header *pmsg_hdr; - u32 bus_no = cmd->create_device.bus_no; - u32 dev_no = cmd->create_device.dev_no; - struct visor_device *dev_info; - struct visor_device *bus_info; - struct visorchannel *visorchannel; - int err; - - bus_info = visorbus_get_device_by_id(bus_no, BUS_ROOT_DEVICE, NULL); - if (!bus_info) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to get bus by id: %d\n", bus_no); - err = -ENODEV; - goto err_respond; - } - if (bus_info->state.created == 0) { - dev_err(&chipset_dev->acpi_device->dev, - "bus not created, id: %d\n", bus_no); - err = -EINVAL; - goto err_respond; - } - dev_info = visorbus_get_device_by_id(bus_no, dev_no, NULL); - if (dev_info && dev_info->state.created == 1) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to get bus by id: %d/%d\n", bus_no, dev_no); - err = -EEXIST; - goto err_respond; - } - - dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL); - if (!dev_info) { - err = -ENOMEM; - goto err_respond; - } - dev_info->chipset_bus_no = bus_no; - dev_info->chipset_dev_no = dev_no; - guid_copy(&dev_info->inst, &cmd->create_device.dev_inst_guid); - dev_info->device.parent = &bus_info->device; - visorchannel = visorchannel_create(cmd->create_device.channel_addr, - GFP_KERNEL, - &cmd->create_device.data_type_guid, - true); - if (!visorchannel) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to create visorchannel: %d/%d\n", - bus_no, dev_no); - err = -ENOMEM; - goto err_free_dev_info; - } - dev_info->visorchannel = visorchannel; - guid_copy(&dev_info->channel_type_guid, - &cmd->create_device.data_type_guid); - if (guid_equal(&cmd->create_device.data_type_guid, - &visor_vhba_channel_guid)) { - err = save_crash_message(inmsg, CRASH_DEV); - if (err) - goto err_destroy_visorchannel; - } - if (inmsg->hdr.flags.response_expected == 1) { - pmsg_hdr = kzalloc(sizeof(*pmsg_hdr), GFP_KERNEL); - if (!pmsg_hdr) { - err = -ENOMEM; - goto err_destroy_visorchannel; - } - memcpy(pmsg_hdr, &inmsg->hdr, - sizeof(struct controlvm_message_header)); - dev_info->pending_msg_hdr = pmsg_hdr; - } - /* create_visor_device will send response */ - err = create_visor_device(dev_info); - if (err) - goto err_destroy_visorchannel; - - return 0; - -err_destroy_visorchannel: - visorchannel_destroy(visorchannel); - -err_free_dev_info: - kfree(dev_info); - -err_respond: - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return err; -} - -static int visorbus_device_changestate(struct controlvm_message *inmsg) -{ - struct controlvm_message_packet *cmd = &inmsg->cmd; - struct controlvm_message_header *pmsg_hdr; - u32 bus_no = cmd->device_change_state.bus_no; - u32 dev_no = cmd->device_change_state.dev_no; - struct visor_segment_state state = cmd->device_change_state.state; - struct visor_device *dev_info; - int err = 0; - - dev_info = visorbus_get_device_by_id(bus_no, dev_no, NULL); - if (!dev_info) { - err = -ENODEV; - goto err_respond; - } - if (dev_info->state.created == 0) { - err = -EINVAL; - goto err_respond; - } - if (dev_info->pending_msg_hdr) { - /* only non-NULL if dev is still waiting on a response */ - err = -EIO; - goto err_respond; - } - - if (inmsg->hdr.flags.response_expected == 1) { - pmsg_hdr = kzalloc(sizeof(*pmsg_hdr), GFP_KERNEL); - if (!pmsg_hdr) { - err = -ENOMEM; - goto err_respond; - } - memcpy(pmsg_hdr, &inmsg->hdr, - sizeof(struct controlvm_message_header)); - dev_info->pending_msg_hdr = pmsg_hdr; - } - if (state.alive == segment_state_running.alive && - state.operating == segment_state_running.operating) - /* Response will be sent from visorchipset_device_resume */ - err = visorchipset_device_resume(dev_info); - /* ServerNotReady / ServerLost / SegmentStateStandby */ - else if (state.alive == segment_state_standby.alive && - state.operating == segment_state_standby.operating) - /* - * technically this is standby case where server is lost. - * Response will be sent from visorchipset_device_pause. - */ - err = visorchipset_device_pause(dev_info); - if (err) - goto err_respond; - return 0; - -err_respond: - dev_err(&chipset_dev->acpi_device->dev, "failed: %d\n", err); - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return err; -} - -static int visorbus_device_destroy(struct controlvm_message *inmsg) -{ - struct controlvm_message_packet *cmd = &inmsg->cmd; - struct controlvm_message_header *pmsg_hdr; - u32 bus_no = cmd->destroy_device.bus_no; - u32 dev_no = cmd->destroy_device.dev_no; - struct visor_device *dev_info; - int err; - - dev_info = visorbus_get_device_by_id(bus_no, dev_no, NULL); - if (!dev_info) { - err = -ENODEV; - goto err_respond; - } - if (dev_info->state.created == 0) { - err = -EINVAL; - goto err_respond; - } - if (dev_info->pending_msg_hdr) { - /* only non-NULL if dev is still waiting on a response */ - err = -EIO; - goto err_respond; - } - if (inmsg->hdr.flags.response_expected == 1) { - pmsg_hdr = kzalloc(sizeof(*pmsg_hdr), GFP_KERNEL); - if (!pmsg_hdr) { - err = -ENOMEM; - goto err_respond; - } - - memcpy(pmsg_hdr, &inmsg->hdr, - sizeof(struct controlvm_message_header)); - dev_info->pending_msg_hdr = pmsg_hdr; - } - kfree(dev_info->name); - remove_visor_device(dev_info); - return 0; - -err_respond: - if (inmsg->hdr.flags.response_expected == 1) - controlvm_responder(inmsg->hdr.id, &inmsg->hdr, err); - return err; -} - -/* - * The general parahotplug flow works as follows. The visorchipset receives - * a DEVICE_CHANGESTATE message from Command specifying a physical device - * to enable or disable. The CONTROLVM message handler calls - * parahotplug_process_message, which then adds the message to a global list - * and kicks off a udev event which causes a user level script to enable or - * disable the specified device. The udev script then writes to - * /sys/devices/platform/visorchipset/parahotplug, which causes the - * parahotplug store functions to get called, at which point the - * appropriate CONTROLVM message is retrieved from the list and responded to. - */ - -#define PARAHOTPLUG_TIMEOUT_MS 2000 - -/* - * parahotplug_next_id() - generate unique int to match an outstanding - * CONTROLVM message with a udev script /sys - * response - * - * Return: a unique integer value - */ -static int parahotplug_next_id(void) -{ - static atomic_t id = ATOMIC_INIT(0); - - return atomic_inc_return(&id); -} - -/* - * parahotplug_next_expiration() - returns the time (in jiffies) when a - * CONTROLVM message on the list should expire - * -- PARAHOTPLUG_TIMEOUT_MS in the future - * - * Return: expected expiration time (in jiffies) - */ -static unsigned long parahotplug_next_expiration(void) -{ - return jiffies + msecs_to_jiffies(PARAHOTPLUG_TIMEOUT_MS); -} - -/* - * parahotplug_request_create() - create a parahotplug_request, which is - * basically a wrapper for a CONTROLVM_MESSAGE - * that we can stick on a list - * @msg: the message to insert in the request - * - * Return: the request containing the provided message - */ -static struct parahotplug_request *parahotplug_request_create( - struct controlvm_message *msg) -{ - struct parahotplug_request *req; - - req = kmalloc(sizeof(*req), GFP_KERNEL); - if (!req) - return NULL; - req->id = parahotplug_next_id(); - req->expiration = parahotplug_next_expiration(); - req->msg = *msg; - return req; -} - -/* - * parahotplug_request_destroy() - free a parahotplug_request - * @req: the request to deallocate - */ -static void parahotplug_request_destroy(struct parahotplug_request *req) -{ - kfree(req); -} - -static LIST_HEAD(parahotplug_request_list); -/* lock for above */ -static DEFINE_SPINLOCK(parahotplug_request_list_lock); - -/* - * parahotplug_request_complete() - mark request as complete - * @id: the id of the request - * @active: indicates whether the request is assigned to active partition - * - * Called from the /sys handler, which means the user script has - * finished the enable/disable. Find the matching identifier, and - * respond to the CONTROLVM message with success. - * - * Return: 0 on success or -EINVAL on failure - */ -static int parahotplug_request_complete(int id, u16 active) -{ - struct list_head *pos; - struct list_head *tmp; - struct parahotplug_request *req; - - spin_lock(¶hotplug_request_list_lock); - /* Look for a request matching "id". */ - list_for_each_safe(pos, tmp, ¶hotplug_request_list) { - req = list_entry(pos, struct parahotplug_request, list); - if (req->id == id) { - /* - * Found a match. Remove it from the list and - * respond. - */ - list_del(pos); - spin_unlock(¶hotplug_request_list_lock); - req->msg.cmd.device_change_state.state.active = active; - if (req->msg.hdr.flags.response_expected) - controlvm_respond( - &req->msg.hdr, CONTROLVM_RESP_SUCCESS, - &req->msg.cmd.device_change_state.state); - parahotplug_request_destroy(req); - return 0; - } - } - spin_unlock(¶hotplug_request_list_lock); - return -EINVAL; -} - -/* - * devicedisabled_store() - disables the hotplug device - * @dev: sysfs interface variable not utilized in this function - * @attr: sysfs interface variable not utilized in this function - * @buf: buffer containing the device id - * @count: the size of the buffer - * - * The parahotplug/devicedisabled interface gets called by our support script - * when an SR-IOV device has been shut down. The ID is passed to the script - * and then passed back when the device has been removed. - * - * Return: the size of the buffer for success or negative for error - */ -static ssize_t devicedisabled_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - unsigned int id; - int err; - - if (kstrtouint(buf, 10, &id)) - return -EINVAL; - err = parahotplug_request_complete(id, 0); - if (err < 0) - return err; - return count; -} -static DEVICE_ATTR_WO(devicedisabled); - -/* - * deviceenabled_store() - enables the hotplug device - * @dev: sysfs interface variable not utilized in this function - * @attr: sysfs interface variable not utilized in this function - * @buf: buffer containing the device id - * @count: the size of the buffer - * - * The parahotplug/deviceenabled interface gets called by our support script - * when an SR-IOV device has been recovered. The ID is passed to the script - * and then passed back when the device has been brought back up. - * - * Return: the size of the buffer for success or negative for error - */ -static ssize_t deviceenabled_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - unsigned int id; - - if (kstrtouint(buf, 10, &id)) - return -EINVAL; - parahotplug_request_complete(id, 1); - return count; -} -static DEVICE_ATTR_WO(deviceenabled); - -static struct attribute *visorchipset_install_attrs[] = { - &dev_attr_toolaction.attr, - &dev_attr_boottotool.attr, - &dev_attr_error.attr, - &dev_attr_textid.attr, - &dev_attr_remaining_steps.attr, - NULL -}; - -static const struct attribute_group visorchipset_install_group = { - .name = "install", - .attrs = visorchipset_install_attrs -}; - -static struct attribute *visorchipset_parahotplug_attrs[] = { - &dev_attr_devicedisabled.attr, - &dev_attr_deviceenabled.attr, - NULL -}; - -static const struct attribute_group visorchipset_parahotplug_group = { - .name = "parahotplug", - .attrs = visorchipset_parahotplug_attrs -}; - -static const struct attribute_group *visorchipset_dev_groups[] = { - &visorchipset_install_group, - &visorchipset_parahotplug_group, - NULL -}; - -/* - * parahotplug_request_kickoff() - initiate parahotplug request - * @req: the request to initiate - * - * Cause uevent to run the user level script to do the disable/enable specified - * in the parahotplug_request. - */ -static int parahotplug_request_kickoff(struct parahotplug_request *req) -{ - struct controlvm_message_packet *cmd = &req->msg.cmd; - char env_cmd[40], env_id[40], env_state[40], env_bus[40], env_dev[40], - env_func[40]; - char *envp[] = { env_cmd, env_id, env_state, env_bus, env_dev, - env_func, NULL - }; - - sprintf(env_cmd, "VISOR_PARAHOTPLUG=1"); - sprintf(env_id, "VISOR_PARAHOTPLUG_ID=%d", req->id); - sprintf(env_state, "VISOR_PARAHOTPLUG_STATE=%d", - cmd->device_change_state.state.active); - sprintf(env_bus, "VISOR_PARAHOTPLUG_BUS=%d", - cmd->device_change_state.bus_no); - sprintf(env_dev, "VISOR_PARAHOTPLUG_DEVICE=%d", - cmd->device_change_state.dev_no >> 3); - sprintf(env_func, "VISOR_PARAHOTPLUG_FUNCTION=%d", - cmd->device_change_state.dev_no & 0x7); - return kobject_uevent_env(&chipset_dev->acpi_device->dev.kobj, - KOBJ_CHANGE, envp); -} - -/* - * parahotplug_process_message() - enables or disables a PCI device by kicking - * off a udev script - * @inmsg: the message indicating whether to enable or disable - */ -static int parahotplug_process_message(struct controlvm_message *inmsg) -{ - struct parahotplug_request *req; - int err; - - req = parahotplug_request_create(inmsg); - if (!req) - return -ENOMEM; - /* - * For enable messages, just respond with success right away, we don't - * need to wait to see if the enable was successful. - */ - if (inmsg->cmd.device_change_state.state.active) { - err = parahotplug_request_kickoff(req); - if (err) - goto err_respond; - controlvm_respond(&inmsg->hdr, CONTROLVM_RESP_SUCCESS, - &inmsg->cmd.device_change_state.state); - parahotplug_request_destroy(req); - return 0; - } - /* - * For disable messages, add the request to the request list before - * kicking off the udev script. It won't get responded to until the - * script has indicated it's done. - */ - spin_lock(¶hotplug_request_list_lock); - list_add_tail(&req->list, ¶hotplug_request_list); - spin_unlock(¶hotplug_request_list_lock); - err = parahotplug_request_kickoff(req); - if (err) - goto err_respond; - return 0; - -err_respond: - controlvm_respond(&inmsg->hdr, err, - &inmsg->cmd.device_change_state.state); - return err; -} - -/* - * chipset_ready_uevent() - sends chipset_ready action - * - * Send ACTION=online for DEVPATH=/sys/devices/platform/visorchipset. - * - * Return: 0 on success, negative on failure - */ -static int chipset_ready_uevent(struct controlvm_message_header *msg_hdr) -{ - int res; - - res = kobject_uevent(&chipset_dev->acpi_device->dev.kobj, KOBJ_ONLINE); - if (msg_hdr->flags.response_expected) - controlvm_respond(msg_hdr, res, NULL); - return res; -} - -/* - * chipset_selftest_uevent() - sends chipset_selftest action - * - * Send ACTION=online for DEVPATH=/sys/devices/platform/visorchipset. - * - * Return: 0 on success, negative on failure - */ -static int chipset_selftest_uevent(struct controlvm_message_header *msg_hdr) -{ - char env_selftest[20]; - char *envp[] = { env_selftest, NULL }; - int res; - - sprintf(env_selftest, "SPARSP_SELFTEST=%d", 1); - res = kobject_uevent_env(&chipset_dev->acpi_device->dev.kobj, - KOBJ_CHANGE, envp); - if (msg_hdr->flags.response_expected) - controlvm_respond(msg_hdr, res, NULL); - return res; -} - -/* - * chipset_notready_uevent() - sends chipset_notready action - * - * Send ACTION=offline for DEVPATH=/sys/devices/platform/visorchipset. - * - * Return: 0 on success, negative on failure - */ -static int chipset_notready_uevent(struct controlvm_message_header *msg_hdr) -{ - int res = kobject_uevent(&chipset_dev->acpi_device->dev.kobj, - KOBJ_OFFLINE); - - if (msg_hdr->flags.response_expected) - controlvm_respond(msg_hdr, res, NULL); - return res; -} - -static int unisys_vmcall(unsigned long tuple, unsigned long param) -{ - int result = 0; - unsigned int cpuid_eax, cpuid_ebx, cpuid_ecx, cpuid_edx; - unsigned long reg_ebx; - unsigned long reg_ecx; - - reg_ebx = param & 0xFFFFFFFF; - reg_ecx = param >> 32; - cpuid(0x00000001, &cpuid_eax, &cpuid_ebx, &cpuid_ecx, &cpuid_edx); - if (!(cpuid_ecx & 0x80000000)) - return -EPERM; - __asm__ __volatile__(".byte 0x00f, 0x001, 0x0c1" : "=a"(result) : - "a"(tuple), "b"(reg_ebx), "c"(reg_ecx)); - if (result) - goto error; - return 0; - -/* Need to convert from VMCALL error codes to Linux */ -error: - switch (result) { - case VMCALL_RESULT_INVALID_PARAM: - return -EINVAL; - case VMCALL_RESULT_DATA_UNAVAILABLE: - return -ENODEV; - default: - return -EFAULT; - } -} - -static int controlvm_channel_create(struct visorchipset_device *dev) -{ - struct visorchannel *chan; - u64 addr; - int err; - - err = unisys_vmcall(VMCALL_CONTROLVM_ADDR, - virt_to_phys(&dev->controlvm_params)); - if (err) - return err; - addr = dev->controlvm_params.address; - chan = visorchannel_create(addr, GFP_KERNEL, - &visor_controlvm_channel_guid, true); - if (!chan) - return -ENOMEM; - dev->controlvm_channel = chan; - return 0; -} - -static void setup_crash_devices_work_queue(struct work_struct *work) -{ - struct controlvm_message local_crash_bus_msg; - struct controlvm_message local_crash_dev_msg; - struct controlvm_message msg = { - .hdr.id = CONTROLVM_CHIPSET_INIT, - .cmd.init_chipset = { - .bus_count = 23, - .switch_count = 0, - }, - }; - u32 local_crash_msg_offset; - u16 local_crash_msg_count; - - /* send init chipset msg */ - chipset_init(&msg); - /* get saved message count */ - if (visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - saved_crash_message_count), - &local_crash_msg_count, sizeof(u16)) < 0) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to read channel\n"); - return; - } - if (local_crash_msg_count != CONTROLVM_CRASHMSG_MAX) { - dev_err(&chipset_dev->acpi_device->dev, "invalid count\n"); - return; - } - /* get saved crash message offset */ - if (visorchannel_read(chipset_dev->controlvm_channel, - offsetof(struct visor_controlvm_channel, - saved_crash_message_offset), - &local_crash_msg_offset, sizeof(u32)) < 0) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to read channel\n"); - return; - } - /* read create device message for storage bus offset */ - if (visorchannel_read(chipset_dev->controlvm_channel, - local_crash_msg_offset, - &local_crash_bus_msg, - sizeof(struct controlvm_message)) < 0) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to read channel\n"); - return; - } - /* read create device message for storage device */ - if (visorchannel_read(chipset_dev->controlvm_channel, - local_crash_msg_offset + - sizeof(struct controlvm_message), - &local_crash_dev_msg, - sizeof(struct controlvm_message)) < 0) { - dev_err(&chipset_dev->acpi_device->dev, - "failed to read channel\n"); - return; - } - /* reuse IOVM create bus message */ - if (!local_crash_bus_msg.cmd.create_bus.channel_addr) { - dev_err(&chipset_dev->acpi_device->dev, - "no valid create_bus message\n"); - return; - } - visorbus_create(&local_crash_bus_msg); - /* reuse create device message for storage device */ - if (!local_crash_dev_msg.cmd.create_device.channel_addr) { - dev_err(&chipset_dev->acpi_device->dev, - "no valid create_device message\n"); - return; - } - visorbus_device_create(&local_crash_dev_msg); -} - -void visorbus_response(struct visor_device *bus_info, int response, - int controlvm_id) -{ - if (!bus_info->pending_msg_hdr) - return; - - controlvm_responder(controlvm_id, bus_info->pending_msg_hdr, response); - kfree(bus_info->pending_msg_hdr); - bus_info->pending_msg_hdr = NULL; -} - -void visorbus_device_changestate_response(struct visor_device *dev_info, - int response, - struct visor_segment_state state) -{ - if (!dev_info->pending_msg_hdr) - return; - - device_changestate_responder(CONTROLVM_DEVICE_CHANGESTATE, dev_info, - response, state); - kfree(dev_info->pending_msg_hdr); - dev_info->pending_msg_hdr = NULL; -} - -static void parser_done(struct parser_context *ctx) -{ - chipset_dev->controlvm_payload_bytes_buffered -= ctx->param_bytes; - kfree(ctx); -} - -static struct parser_context *parser_init_stream(u64 addr, u32 bytes, - bool *retry) -{ - unsigned long allocbytes; - struct parser_context *ctx; - void *mapping; - - *retry = false; - /* alloc an extra byte to ensure payload is \0 terminated */ - allocbytes = (unsigned long)bytes + 1 + (sizeof(struct parser_context) - - sizeof(struct visor_controlvm_parameters_header)); - if ((chipset_dev->controlvm_payload_bytes_buffered + bytes) > - MAX_CONTROLVM_PAYLOAD_BYTES) { - *retry = true; - return NULL; - } - ctx = kzalloc(allocbytes, GFP_KERNEL); - if (!ctx) { - *retry = true; - return NULL; - } - ctx->allocbytes = allocbytes; - ctx->param_bytes = bytes; - mapping = memremap(addr, bytes, MEMREMAP_WB); - if (!mapping) - goto err_finish_ctx; - memcpy(&ctx->data, mapping, bytes); - memunmap(mapping); - ctx->byte_stream = true; - chipset_dev->controlvm_payload_bytes_buffered += ctx->param_bytes; - return ctx; - -err_finish_ctx: - kfree(ctx); - return NULL; -} - -/* - * handle_command() - process a controlvm message - * @inmsg: the message to process - * @channel_addr: address of the controlvm channel - * - * Return: - * 0 - Successfully processed the message - * -EAGAIN - ControlVM message was not processed and should be retried - * reading the next controlvm message; a scenario where this can - * occur is when we need to throttle the allocation of memory in - * which to copy out controlvm payload data. - * < 0 - error: ControlVM message was processed but an error occurred. - */ -static int handle_command(struct controlvm_message inmsg, u64 channel_addr) -{ - struct controlvm_message_packet *cmd = &inmsg.cmd; - u64 parm_addr; - u32 parm_bytes; - struct parser_context *parser_ctx = NULL; - struct controlvm_message ackmsg; - int err = 0; - - /* create parsing context if necessary */ - parm_addr = channel_addr + inmsg.hdr.payload_vm_offset; - parm_bytes = inmsg.hdr.payload_bytes; - /* - * Parameter and channel addresses within test messages actually lie - * within our OS-controlled memory. We need to know that, because it - * makes a difference in how we compute the virtual address. - */ - if (parm_bytes) { - bool retry; - - parser_ctx = parser_init_stream(parm_addr, parm_bytes, &retry); - if (!parser_ctx && retry) - return -EAGAIN; - } - controlvm_init_response(&ackmsg, &inmsg.hdr, CONTROLVM_RESP_SUCCESS); - err = visorchannel_signalinsert(chipset_dev->controlvm_channel, - CONTROLVM_QUEUE_ACK, &ackmsg); - if (err) - return err; - switch (inmsg.hdr.id) { - case CONTROLVM_CHIPSET_INIT: - err = chipset_init(&inmsg); - break; - case CONTROLVM_BUS_CREATE: - err = visorbus_create(&inmsg); - break; - case CONTROLVM_BUS_DESTROY: - err = visorbus_destroy(&inmsg); - break; - case CONTROLVM_BUS_CONFIGURE: - err = visorbus_configure(&inmsg, parser_ctx); - break; - case CONTROLVM_DEVICE_CREATE: - err = visorbus_device_create(&inmsg); - break; - case CONTROLVM_DEVICE_CHANGESTATE: - if (cmd->device_change_state.flags.phys_device) { - err = parahotplug_process_message(&inmsg); - } else { - /* - * save the hdr and cmd structures for later use when - * sending back the response to Command - */ - err = visorbus_device_changestate(&inmsg); - break; - } - break; - case CONTROLVM_DEVICE_DESTROY: - err = visorbus_device_destroy(&inmsg); - break; - case CONTROLVM_DEVICE_CONFIGURE: - /* no op just send a respond that we passed */ - if (inmsg.hdr.flags.response_expected) - controlvm_respond(&inmsg.hdr, CONTROLVM_RESP_SUCCESS, - NULL); - break; - case CONTROLVM_CHIPSET_READY: - err = chipset_ready_uevent(&inmsg.hdr); - break; - case CONTROLVM_CHIPSET_SELFTEST: - err = chipset_selftest_uevent(&inmsg.hdr); - break; - case CONTROLVM_CHIPSET_STOP: - err = chipset_notready_uevent(&inmsg.hdr); - break; - default: - err = -ENOMSG; - if (inmsg.hdr.flags.response_expected) - controlvm_respond(&inmsg.hdr, - -CONTROLVM_RESP_ID_UNKNOWN, NULL); - break; - } - if (parser_ctx) { - parser_done(parser_ctx); - parser_ctx = NULL; - } - return err; -} - -/* - * read_controlvm_event() - retreives the next message from the - * CONTROLVM_QUEUE_EVENT queue in the controlvm - * channel - * @msg: pointer to the retrieved message - * - * Return: 0 if valid message was retrieved or -error - */ -static int read_controlvm_event(struct controlvm_message *msg) -{ - int err = visorchannel_signalremove(chipset_dev->controlvm_channel, - CONTROLVM_QUEUE_EVENT, msg); - - if (err) - return err; - /* got a message */ - if (msg->hdr.flags.test_message == 1) - return -EINVAL; - return 0; -} - -/* - * parahotplug_process_list() - remove any request from the list that's been on - * there too long and respond with an error - */ -static void parahotplug_process_list(void) -{ - struct list_head *pos; - struct list_head *tmp; - - spin_lock(¶hotplug_request_list_lock); - list_for_each_safe(pos, tmp, ¶hotplug_request_list) { - struct parahotplug_request *req = - list_entry(pos, struct parahotplug_request, list); - - if (!time_after_eq(jiffies, req->expiration)) - continue; - list_del(pos); - if (req->msg.hdr.flags.response_expected) - controlvm_respond( - &req->msg.hdr, - CONTROLVM_RESP_DEVICE_UDEV_TIMEOUT, - &req->msg.cmd.device_change_state.state); - parahotplug_request_destroy(req); - } - spin_unlock(¶hotplug_request_list_lock); -} - -static void controlvm_periodic_work(struct work_struct *work) -{ - struct controlvm_message inmsg; - int count = 0; - int err; - - /* Drain the RESPONSE queue make it empty */ - do { - err = visorchannel_signalremove(chipset_dev->controlvm_channel, - CONTROLVM_QUEUE_RESPONSE, - &inmsg); - } while ((!err) && (++count < CONTROLVM_MESSAGE_MAX)); - if (err != -EAGAIN) - goto schedule_out; - if (chipset_dev->controlvm_pending_msg_valid) { - /* - * we throttled processing of a prior msg, so try to process - * it again rather than reading a new one - */ - inmsg = chipset_dev->controlvm_pending_msg; - chipset_dev->controlvm_pending_msg_valid = false; - err = 0; - } else { - err = read_controlvm_event(&inmsg); - } - while (!err) { - chipset_dev->most_recent_message_jiffies = jiffies; - err = handle_command(inmsg, - visorchannel_get_physaddr - (chipset_dev->controlvm_channel)); - if (err == -EAGAIN) { - chipset_dev->controlvm_pending_msg = inmsg; - chipset_dev->controlvm_pending_msg_valid = true; - break; - } - - err = read_controlvm_event(&inmsg); - } - /* parahotplug_worker */ - parahotplug_process_list(); - -/* - * The controlvm messages are sent in a bulk. If we start receiving messages, we - * want the polling to be fast. If we do not receive any message for - * MIN_IDLE_SECONDS, we can slow down the polling. - */ -schedule_out: - if (time_after(jiffies, chipset_dev->most_recent_message_jiffies + - (HZ * MIN_IDLE_SECONDS))) { - /* - * it's been longer than MIN_IDLE_SECONDS since we processed - * our last controlvm message; slow down the polling - */ - if (chipset_dev->poll_jiffies != POLLJIFFIES_CONTROLVM_SLOW) - chipset_dev->poll_jiffies = POLLJIFFIES_CONTROLVM_SLOW; - } else { - if (chipset_dev->poll_jiffies != POLLJIFFIES_CONTROLVM_FAST) - chipset_dev->poll_jiffies = POLLJIFFIES_CONTROLVM_FAST; - } - schedule_delayed_work(&chipset_dev->periodic_controlvm_work, - chipset_dev->poll_jiffies); -} - -static int visorchipset_init(struct acpi_device *acpi_device) -{ - int err = -ENOMEM; - struct visorchannel *controlvm_channel; - - chipset_dev = kzalloc(sizeof(*chipset_dev), GFP_KERNEL); - if (!chipset_dev) - goto error; - err = controlvm_channel_create(chipset_dev); - if (err) - goto error_free_chipset_dev; - acpi_device->driver_data = chipset_dev; - chipset_dev->acpi_device = acpi_device; - chipset_dev->poll_jiffies = POLLJIFFIES_CONTROLVM_FAST; - err = sysfs_create_groups(&chipset_dev->acpi_device->dev.kobj, - visorchipset_dev_groups); - if (err < 0) - goto error_destroy_channel; - controlvm_channel = chipset_dev->controlvm_channel; - if (!visor_check_channel(visorchannel_get_header(controlvm_channel), - &chipset_dev->acpi_device->dev, - &visor_controlvm_channel_guid, - "controlvm", - sizeof(struct visor_controlvm_channel), - VISOR_CONTROLVM_CHANNEL_VERSIONID, - VISOR_CHANNEL_SIGNATURE)) { - err = -ENODEV; - goto error_delete_groups; - } - /* if booting in a crash kernel */ - if (is_kdump_kernel()) - INIT_DELAYED_WORK(&chipset_dev->periodic_controlvm_work, - setup_crash_devices_work_queue); - else - INIT_DELAYED_WORK(&chipset_dev->periodic_controlvm_work, - controlvm_periodic_work); - chipset_dev->most_recent_message_jiffies = jiffies; - chipset_dev->poll_jiffies = POLLJIFFIES_CONTROLVM_FAST; - schedule_delayed_work(&chipset_dev->periodic_controlvm_work, - chipset_dev->poll_jiffies); - err = visorbus_init(); - if (err < 0) - goto error_cancel_work; - return 0; - -error_cancel_work: - cancel_delayed_work_sync(&chipset_dev->periodic_controlvm_work); - -error_delete_groups: - sysfs_remove_groups(&chipset_dev->acpi_device->dev.kobj, - visorchipset_dev_groups); - -error_destroy_channel: - visorchannel_destroy(chipset_dev->controlvm_channel); - -error_free_chipset_dev: - kfree(chipset_dev); - -error: - dev_err(&acpi_device->dev, "failed with error %d\n", err); - return err; -} - -static int visorchipset_exit(struct acpi_device *acpi_device) -{ - visorbus_exit(); - cancel_delayed_work_sync(&chipset_dev->periodic_controlvm_work); - sysfs_remove_groups(&chipset_dev->acpi_device->dev.kobj, - visorchipset_dev_groups); - visorchannel_destroy(chipset_dev->controlvm_channel); - kfree(chipset_dev); - return 0; -} - -static const struct acpi_device_id unisys_device_ids[] = { - {"PNP0A07", 0}, - {"", 0}, -}; - -static struct acpi_driver unisys_acpi_driver = { - .name = "unisys_acpi", - .class = "unisys_acpi_class", - .owner = THIS_MODULE, - .ids = unisys_device_ids, - .ops = { - .add = visorchipset_init, - .remove = visorchipset_exit, - }, -}; - -MODULE_DEVICE_TABLE(acpi, unisys_device_ids); - -static __init int visorutil_spar_detect(void) -{ - unsigned int eax, ebx, ecx, edx; - - if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) { - /* check the ID */ - cpuid(UNISYS_VISOR_LEAF_ID, &eax, &ebx, &ecx, &edx); - return (ebx == UNISYS_VISOR_ID_EBX) && - (ecx == UNISYS_VISOR_ID_ECX) && - (edx == UNISYS_VISOR_ID_EDX); - } - return 0; -} - -static int __init init_unisys(void) -{ - int result; - - if (!visorutil_spar_detect()) - return -ENODEV; - result = acpi_bus_register_driver(&unisys_acpi_driver); - if (result) - return -ENODEV; - pr_info("Unisys Visorchipset Driver Loaded.\n"); - return 0; -}; - -static void __exit exit_unisys(void) -{ - acpi_bus_unregister_driver(&unisys_acpi_driver); -} - -module_init(init_unisys); -module_exit(exit_unisys); - -MODULE_AUTHOR("Unisys"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("s-Par visorbus driver for virtual device buses");