From 85ef8d611f4b0216bc4f96487a0408d5c887f6f9 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Fri, 6 Nov 2015 11:46:37 +0100 Subject: [PATCH 01/17] ARM: dts: rockchip: Setup rk3288 ethernet0 alias for u-boot Add an ethernet0 alias for the RK3288 mac interface so that u-boot can find the device-node and fill in the mac address on boards that support a wired network interface. Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 6a79c9c526b8..16187c39d035 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -53,6 +53,7 @@ / { interrupt-parent = <&gic>; aliases { + ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; From b3e4b95366a5fcdc1ce3c3e9ffb5db11e1b11939 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sat, 7 Nov 2015 22:37:26 +0100 Subject: [PATCH 02/17] ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot Add an ethernet0 alias for the RK3066/RK3188 mac interface so that u-boot can find the device-node and fill in the mac address on boards that support a wired network interface. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3xxx.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 4497d288a7cb..99eeea70223b 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -49,6 +49,7 @@ / { interrupt-parent = <&gic>; aliases { + ethernet0 = &emac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; From da0a1cf6af5d26b44ed6ce50d881beacdadb0d63 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Thu, 19 Nov 2015 13:45:31 +0000 Subject: [PATCH 03/17] ARM: dts: rockchip: set system-power-controller property on rk3288-rock2 The act8846 on rock2 boards controls the system power, so add the appropriate property to allow turning off the board. Signed-off-by: John Keeping Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-rock2-som.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 1813b7c36556..1ece66f3e162 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -109,6 +109,7 @@ &i2c0 { act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; + system-power-controller; inl1-supply = <&vcc_io>; inl2-supply = <&vcc_sys>; inl3-supply = <&vcc_20>; From e241657de0ced9b40cad126f461b23a8d6c1b563 Mon Sep 17 00:00:00 2001 From: Sugar Zhang Date: Tue, 10 Nov 2015 15:32:09 +0800 Subject: [PATCH 04/17] ARM: dts: rockchip: add channels properties for i2s add playback and capture properties to compatible various chips. Signed-off-by: Sugar Zhang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a.dtsi | 6 ++++++ arch/arm/boot/dts/rk3188.dtsi | 2 ++ arch/arm/boot/dts/rk3288.dtsi | 2 ++ 3 files changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 946f18705e96..1003f9c1ca8a 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -103,6 +103,8 @@ i2s0: i2s@10118000 { dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,playback-channels = <8>; + rockchip,capture-channels = <2>; status = "disabled"; }; @@ -118,6 +120,8 @@ i2s1: i2s@1011a000 { dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "disabled"; }; @@ -133,6 +137,8 @@ i2s2: i2s@1011c000 { dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 6399942f1840..42a67d8fe129 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -118,6 +118,8 @@ i2s0: i2s@1011a000 { dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 16187c39d035..2040a1b0cf76 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -776,6 +776,8 @@ i2s: i2s@ff890000 { clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + rockchip,playback-channels = <8>; + rockchip,capture-channels = <2>; status = "disabled"; }; From 3a035ea0e9e92614efe08465813b16aa40048d7c Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Mon, 23 Nov 2015 15:36:28 +0100 Subject: [PATCH 05/17] ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 Square Add support for the IR receiver as present on the Radxa Rock 2 Square board. Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-rock2-square.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8af35c867a80..c5453a0b07fc 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -49,6 +49,13 @@ chosen { stdout-path = "serial2:115200n8"; }; + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF"; @@ -131,6 +138,12 @@ &i2c5 { }; &pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; From 94d5d6a0fbf33c5fde246b61b8c358cfeeba633f Mon Sep 17 00:00:00 2001 From: Zain Wang Date: Tue, 17 Nov 2015 12:00:45 +0800 Subject: [PATCH 06/17] clk: rockchip: add an id for rk3288 crypto clk Add an id for crypto clk to the binding header, so that it can be called in other part. Signed-off-by: Zain Wang Acked-by: Michael Turquette Signed-off-by: Heiko Stuebner --- include/dt-bindings/clock/rk3288-cru.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h index c719aacef14f..9e0a5e9acee9 100644 --- a/include/dt-bindings/clock/rk3288-cru.h +++ b/include/dt-bindings/clock/rk3288-cru.h @@ -86,6 +86,7 @@ #define SCLK_USBPHY480M_SRC 122 #define SCLK_PVTM_CORE 123 #define SCLK_PVTM_GPU 124 +#define SCLK_CRYPTO 125 #define SCLK_MAC 151 #define SCLK_MACREF_OUT 152 From 8b0d55e962137bf92f9342ec78e1d8e5fd1c03be Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Thu, 5 Nov 2015 15:33:56 +0800 Subject: [PATCH 07/17] clk: rockchip: add dt-binding header for rk3036 Add the dt-bindings header for the rk3036, that gets shared between the clock controller and the clock references in the dts. Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- include/dt-bindings/clock/rk3036-cru.h | 193 +++++++++++++++++++++++++ 1 file changed, 193 insertions(+) create mode 100644 include/dt-bindings/clock/rk3036-cru.h diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h new file mode 100644 index 000000000000..ebc7a7b43f52 --- /dev/null +++ b/include/dt-bindings/clock/rk3036-cru.h @@ -0,0 +1,193 @@ +/* + * Copyright (c) 2015 Rockchip Electronics Co. Ltd. + * Author: Xing Zheng + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H +#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H + +/* core clocks */ +#define PLL_APLL 1 +#define PLL_DPLL 2 +#define PLL_GPLL 3 +#define ARMCLK 4 + +/* sclk gates (special clocks) */ +#define SCLK_GPU 64 +#define SCLK_SPI 65 +#define SCLK_SDMMC 68 +#define SCLK_SDIO 69 +#define SCLK_EMMC 71 +#define SCLK_NANDC 76 +#define SCLK_UART0 77 +#define SCLK_UART1 78 +#define SCLK_UART2 79 +#define SCLK_I2S 82 +#define SCLK_SPDIF 83 +#define SCLK_TIMER0 85 +#define SCLK_TIMER1 86 +#define SCLK_TIMER2 87 +#define SCLK_TIMER3 88 +#define SCLK_OTGPHY0 93 +#define SCLK_LCDC 100 +#define SCLK_HDMI 109 +#define SCLK_HEVC 111 +#define SCLK_I2S_OUT 113 +#define SCLK_SDMMC_DRV 114 +#define SCLK_SDIO_DRV 115 +#define SCLK_EMMC_DRV 117 +#define SCLK_SDMMC_SAMPLE 118 +#define SCLK_SDIO_SAMPLE 119 +#define SCLK_EMMC_SAMPLE 121 +#define SCLK_PVTM_CORE 123 +#define SCLK_PVTM_GPU 124 +#define SCLK_PVTM_VIDEO 125 +#define SCLK_MAC 151 +#define SCLK_MACREF 152 +#define SCLK_SFC 160 + +/* aclk gates */ +#define ACLK_DMAC2 194 +#define ACLK_LCDC 197 +#define ACLK_VIO 203 +#define ACLK_VCODEC 208 +#define ACLK_CPU 209 +#define ACLK_PERI 210 + +/* pclk gates */ +#define PCLK_GPIO0 320 +#define PCLK_GPIO1 321 +#define PCLK_GPIO2 322 +#define PCLK_GRF 329 +#define PCLK_I2C0 332 +#define PCLK_I2C1 333 +#define PCLK_I2C2 334 +#define PCLK_SPI 338 +#define PCLK_UART0 341 +#define PCLK_UART1 342 +#define PCLK_UART2 343 +#define PCLK_PWM 350 +#define PCLK_TIMER 353 +#define PCLK_HDMI 360 +#define PCLK_CPU 362 +#define PCLK_PERI 363 +#define PCLK_DDRUPCTL 364 +#define PCLK_WDT 368 +#define PCLK_ACODEC 369 + +/* hclk gates */ +#define HCLK_OTG0 449 +#define HCLK_OTG1 450 +#define HCLK_NANDC 453 +#define HCLK_SDMMC 456 +#define HCLK_SDIO 457 +#define HCLK_EMMC 459 +#define HCLK_I2S 462 +#define HCLK_LCDC 465 +#define HCLK_ROM 467 +#define HCLK_VIO_BUS 472 +#define HCLK_VCODEC 476 +#define HCLK_CPU 477 +#define HCLK_PERI 478 + +#define CLK_NR_CLKS (HCLK_PERI + 1) + +/* soft-reset indices */ +#define SRST_CORE0 0 +#define SRST_CORE1 1 +#define SRST_CORE0_DBG 4 +#define SRST_CORE1_DBG 5 +#define SRST_CORE0_POR 8 +#define SRST_CORE1_POR 9 +#define SRST_L2C 12 +#define SRST_TOPDBG 13 +#define SRST_STRC_SYS_A 14 +#define SRST_PD_CORE_NIU 15 + +#define SRST_TIMER2 16 +#define SRST_CPUSYS_H 17 +#define SRST_AHB2APB_H 19 +#define SRST_TIMER3 20 +#define SRST_INTMEM 21 +#define SRST_ROM 22 +#define SRST_PERI_NIU 23 +#define SRST_I2S 24 +#define SRST_DDR_PLL 25 +#define SRST_GPU_DLL 26 +#define SRST_TIMER0 27 +#define SRST_TIMER1 28 +#define SRST_CORE_DLL 29 +#define SRST_EFUSE_P 30 +#define SRST_ACODEC_P 31 + +#define SRST_GPIO0 32 +#define SRST_GPIO1 33 +#define SRST_GPIO2 34 +#define SRST_UART0 39 +#define SRST_UART1 40 +#define SRST_UART2 41 +#define SRST_I2C0 43 +#define SRST_I2C1 44 +#define SRST_I2C2 45 +#define SRST_SFC 47 + +#define SRST_PWM0 48 +#define SRST_DAP 51 +#define SRST_DAP_SYS 52 +#define SRST_GRF 55 +#define SRST_PERIPHSYS_A 57 +#define SRST_PERIPHSYS_H 58 +#define SRST_PERIPHSYS_P 59 +#define SRST_CPU_PERI 61 +#define SRST_EMEM_PERI 62 +#define SRST_USB_PERI 63 + +#define SRST_DMA2 64 +#define SRST_MAC 66 +#define SRST_NANDC 68 +#define SRST_USBOTG0 69 +#define SRST_OTGC0 71 +#define SRST_USBOTG1 72 +#define SRST_OTGC1 74 +#define SRST_DDRMSCH 79 + +#define SRST_MMC0 81 +#define SRST_SDIO 82 +#define SRST_EMMC 83 +#define SRST_SPI0 84 +#define SRST_WDT 86 +#define SRST_DDRPHY 88 +#define SRST_DDRPHY_P 89 +#define SRST_DDRCTRL 90 +#define SRST_DDRCTRL_P 91 + +#define SRST_HDMI_P 96 +#define SRST_VIO_BUS_H 99 +#define SRST_UTMI0 103 +#define SRST_UTMI1 104 +#define SRST_USBPOR 105 + +#define SRST_VCODEC_A 112 +#define SRST_VCODEC_H 113 +#define SRST_VIO1_A 114 +#define SRST_HEVC 115 +#define SRST_VCODEC_NIU_A 116 +#define SRST_LCDC1_A 117 +#define SRST_LCDC1_H 118 +#define SRST_LCDC1_D 119 +#define SRST_GPU 120 +#define SRST_GPU_NIU_A 122 + +#define SRST_DBG_P 131 + +#endif From faea098e1808729e4785cdba3a3fc52fae49f1ab Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Thu, 5 Nov 2015 15:39:52 +0800 Subject: [PATCH 08/17] ARM: dts: rockchip: add core rk3036 dtsi Initial release for rk3036 shared dtsi. Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3036.dtsi | 554 ++++++++++++++++++++++++++++++++++ 1 file changed, 554 insertions(+) create mode 100644 arch/arm/boot/dts/rk3036.dtsi diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi new file mode 100644 index 000000000000..f8758bf15933 --- /dev/null +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -0,0 +1,554 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include "skeleton.dtsi" + +/ { + compatible = "rockchip,rk3036"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + mshc0 = &emmc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "rockchip,rk3036-smp"; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + resets = <&cru SRST_CORE0>; + operating-points = < + /* KHz uV */ + 816000 1000000 + >; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + resets = <&cru SRST_CORE1>; + }; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = , + ; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + ; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + bus_intmem@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x00 0x10>; + }; + }; + + gic: interrupt-controller@10139000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x10139000 0x1000>, + <0x1013a000 0x1000>, + <0x1013c000 0x2000>, + <0x1013e000 0x2000>; + interrupts = ; + }; + + usb_otg: usb@10180000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = ; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; + status = "disabled"; + }; + + usb_host: usb@101c0000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x101c0000 0x40000>; + interrupts = ; + clocks = <&cru HCLK_OTG1>; + clock-names = "otg"; + dr_mode = "host"; + status = "disabled"; + }; + + emmc: dwmmc@1021c000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x1021c000 0x4000>; + interrupts = ; + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <37500000>; + clock-freq-min-max = <400000 37500000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + default-sample-phase = <158>; + disable-wp; + dmas = <&pdma 12>; + dma-names = "rx-tx"; + fifo-depth = <0x100>; + mmc-ddr-1_8v; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "disabled"; + }; + + i2s: i2s@10220000 { + compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; + reg = <0x10220000 0x4000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_bus>; + status = "disabled"; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3036-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>; + assigned-clock-rates = <594000000>; + }; + + grf: syscon@20008000 { + compatible = "rockchip,rk3036-grf", "syscon"; + reg = <0x20008000 0x1000>; + }; + + acodec: acodec-ana@20030000 { + compatible = "rk3036-codec"; + reg = <0x20030000 0x4000>; + rockchip,grf = <&grf>; + clock-names = "acodec_pclk"; + clocks = <&cru PCLK_ACODEC>; + status = "disabled"; + }; + + timer: timer@20044000 { + compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; + reg = <0x20044000 0x20>; + interrupts = ; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + + pwm0: pwm@20050000 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050000 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "disabled"; + }; + + pwm1: pwm@20050010 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050010 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + status = "disabled"; + }; + + pwm2: pwm@20050020 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050020 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + status = "disabled"; + }; + + pwm3: pwm@20050030 { + compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; + reg = <0x20050030 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + status = "disabled"; + }; + + i2c1: i2c@20056000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0x20056000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c2: i2c@2005a000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0x2005a000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + uart0: serial@20060000 { + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; + reg = <0x20060000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@20064000 { + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; + reg = <0x20064000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart2: serial@20068000 { + compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; + reg = <0x20068000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "disabled"; + }; + + i2c0: i2c@20072000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0x20072000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3036-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@2007c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2007c000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <0 1 2 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <0 27 1 &pcfg_pull_none>; + }; + }; + + emmc { + /* + * We run eMMC at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + emmc_clk: emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, + <1 25 RK_FUNC_2 &pcfg_pull_none>, + <1 26 RK_FUNC_2 &pcfg_pull_none>, + <1 27 RK_FUNC_2 &pcfg_pull_none>, + <1 28 RK_FUNC_2 &pcfg_pull_none>, + <1 29 RK_FUNC_2 &pcfg_pull_none>, + <1 30 RK_FUNC_2 &pcfg_pull_none>, + <1 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, + <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, + <0 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, + <2 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2s { + i2s_bus: i2s-bus { + rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>, + <1 1 RK_FUNC_1 &pcfg_pull_none>, + <1 2 RK_FUNC_1 &pcfg_pull_none>, + <1 3 RK_FUNC_1 &pcfg_pull_none>, + <1 4 RK_FUNC_1 &pcfg_pull_none>, + <1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_up>, + <0 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_up>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>, + <2 23 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart1 */ + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, + <1 19 RK_FUNC_2 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + }; +}; From faef90f1a203f96796d5bc3c6225ee100ec70864 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Thu, 5 Nov 2015 15:39:52 +0800 Subject: [PATCH 09/17] ARM: dts: rockchip: add rk3036-evb board Initial release for rk3036 sdk board. Signed-off-by: Xing Zheng Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3036-evb.dts | 64 ++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+) create mode 100644 arch/arm/boot/dts/rk3036-evb.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc3746130..87c875247518 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -512,6 +512,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ + rk3036-evb.dtb \ rk3066a-bqcurie2.dtb \ rk3066a-marsboard.dtb \ rk3066a-rayeager.dtb \ diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts new file mode 100644 index 000000000000..28a033666017 --- /dev/null +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -0,0 +1,64 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3036.dtsi" + +/ { + model = "Rockchip RK3036 Evaluation board"; + compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; +}; + +&i2c1 { + status = "okay"; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&uart2 { + status = "okay"; +}; From c2cb616129ba28a530eb286c1e9c5bf9da042924 Mon Sep 17 00:00:00 2001 From: Zain Wang Date: Wed, 25 Nov 2015 13:43:33 +0800 Subject: [PATCH 10/17] ARM: dts: rockchip: Add Crypto node for rk3288 Add Crypto node for rk3288 including crypto controller and dma clk. Signed-off-by: Zain Wang Tested-by: Heiko Stuebner Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2040a1b0cf76..6d6cc16669b2 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -781,6 +781,18 @@ i2s: i2s@ff890000 { status = "disabled"; }; + crypto: cypto-controller@ff8a0000 { + compatible = "rockchip,rk3288-crypto"; + reg = <0xff8a0000 0x4000>; + interrupts = ; + clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, + <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; + clock-names = "aclk", "hclk", "sclk", "apb_pclk"; + resets = <&cru SRST_CRYPTO>; + reset-names = "crypto-rst"; + status = "okay"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0xff930000 0x19c>; From 8ff3b9b40c3f85892e8e6c5b43b1c6ce77400275 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Fri, 13 Feb 2015 11:41:43 +0800 Subject: [PATCH 11/17] ARM: dts: rockchip: update the thermal management on rk3288 In some cases the machine radiating is very poor,sometime the temperature is rising very quickly on heavy loading.So we need have more frequent polling and better granularity. Signed-off-by: Caesar Wang Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-thermal.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi index 340406652186..651b962e3d53 100644 --- a/arch/arm/boot/dts/rk3288-thermal.dtsi +++ b/arch/arm/boot/dts/rk3288-thermal.dtsi @@ -52,7 +52,7 @@ reserve_thermal: reserve_thermal { }; cpu_thermal: cpu_thermal { - polling-delay-passive = <1000>; /* milliseconds */ + polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ thermal-sensors = <&tsadc 1>; @@ -63,6 +63,11 @@ cpu_alert0: cpu_alert0 { hysteresis = <2000>; /* millicelsius */ type = "passive"; }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; cpu_crit: cpu_crit { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ @@ -73,6 +78,11 @@ cpu_crit: cpu_crit { cooling-maps { map0 { trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; @@ -80,7 +90,7 @@ map0 { }; gpu_thermal: gpu_thermal { - polling-delay-passive = <1000>; /* milliseconds */ + polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ thermal-sensors = <&tsadc 2>; From 97cb9ce91decfb722255122f37b403145f2ddbb4 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 30 Nov 2015 13:17:37 +0100 Subject: [PATCH 12/17] ARM: dts: rockchip: override thermal settings on veyron-speedy According to a commit on the ChromeOS kernel, the temperature of the Speedy surface is over skin temperature spec. So adjust the thermal settings to mimic the ChromeOS tree to stay within these spec limits. Signed-off-by: Heiko Stuebner Reviewed-by: Caesar Wang --- arch/arm/boot/dts/rk3288-veyron-speedy.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a7ea7d06cf7f..b34a7b5b3f62 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -88,6 +88,14 @@ backlight_regulator: backlight-regulator { }; }; +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_alert1 { + temperature = <70000>; +}; + &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; From ba5810ab0c84069a73b4cd30582c77568158635f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 30 Nov 2015 14:23:17 +0100 Subject: [PATCH 13/17] ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyron The edp-24m clock has two possible sources: the 24MHz oscillator as well as an external 27MHz input. The power-on-default is the 27MHz clock which is not supplied on all Rockchip boards. While on all current boards and also all Veyron Chromebooks the bootloader seems to adapt the muxing to the internal source, this doesn't seem to be the case on headless veyron devices like brain and mickey making the edp-24m clock an orphan. On the hardware side the 27m input also is not connected at all. With the upcoming deferral of orphan-clocks this results in the power- domain code deferring, as it cannot request the needed clock and if the synchronous reset is sucessfullat all in this case is also unknown. So fix that by making sure, the edp-24m clock is muxed to the internal 24MHz oscillator at all times. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 5e61f07724d4..9fce91ffff6f 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -340,6 +340,11 @@ &i2c5 { i2c-scl-rising-time-ns = <1000>; }; +&power { + assigned-clocks = <&cru SCLK_EDP_24M>; + assigned-clock-parents = <&xin24m>; +}; + &pwm1 { status = "okay"; }; From 6ea78309ad3ef6bbc6da69da7357d23d15c21fd5 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 30 Nov 2015 15:29:11 +0100 Subject: [PATCH 14/17] ARM: dts: rockchip: add veyron-brain board Similar to pinky, brain is a development model and probably also nearing extinction. But to keep pinky from being lonely I'll keep the two brain boards around as well, especially as they as well have easily accessible dut-connectors. Signed-off-by: Heiko Stuebner For the license change: Acked-by: Brian Norris --- .../devicetree/bindings/arm/rockchip.txt | 5 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-veyron-brain.dts | 139 ++++++++++++++++++ 3 files changed, 145 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-veyron-brain.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 8e985dd2f181..2f8b35ada4ce 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -35,6 +35,11 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "netxeon,r89", "rockchip,rk3288"; +- Google Brain (dev-board): + Required root node properties: + - compatible = "google,veyron-brain-rev0", "google,veyron-brain", + "google,veyron", "rockchip,rk3288"; + - Google Jaq (Haier Chromebook 11 and more): Required root node properties: - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 87c875247518..2f29350ccce1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ + rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-minnie.dtb \ diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts new file mode 100644 index 000000000000..cf5311d2617c --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -0,0 +1,139 @@ +/* + * Google Veyron Brain Rev 0 board device tree source + * + * Copyright 2014 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" + +/ { + model = "Google Brain"; + compatible = "google,veyron-brain-rev0", "google,veyron-brain", + "google,veyron", "rockchip,rk3288"; + + vcc33_sys: vcc33-sys { + vin-supply = <&vcc_5v>; + }; + + vcc33_io: vcc33_io { + compatible = "regulator-fixed"; + regulator-name = "vcc33_io"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc33_sys>; + /* This is gated by vcc_18 too */ + }; + + /* This turns on vbus for host2 and otg (dwc2) */ + vcc5_host2: vcc5-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pwr_en>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&pinctrl { + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-host { + usb2_pwr_en: usb2-pwr-en { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + /delete-property/ vcc6-supply; + + regulators { + /* vcc33_io is sourced directly from vcc33_sys */ + /delete-node/ LDO_REG1; + + /* This is not a pwren anymore, but the real power supply */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-suspend-mem-disabled; + }; + + vcc18_hdmi: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc18_hdmi"; + regulator-suspend-mem-disabled; + }; + }; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; From 0e1410dda74ef1834916ce60d646ce13cfafb314 Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Tue, 1 Dec 2015 17:03:04 +0100 Subject: [PATCH 15/17] ARM: dts: rockchip: add veyron-mickey board Also known as the Asus Chromebit. Signed-off-by: Chris Zhong Tested-by: Caesar Wang For the license change: Acked-by: Brian Norris Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/arm/rockchip.txt | 9 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-veyron-mickey.dts | 250 ++++++++++++++++++ 3 files changed, 260 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-veyron-mickey.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 2f8b35ada4ce..2fa0a213a0c1 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -54,6 +54,15 @@ Rockchip platforms device tree bindings "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; +- Google Mickey (Asus Chromebit CS10): + Required root node properties: + - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", + "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", + "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", + "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", + "google,veyron-mickey-rev0", "google,veyron-mickey", + "google,veyron", "rockchip,rk3288"; + - Google Minnie (Asus Chromebook Flip C100P): Required root node properties: - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2f29350ccce1..8b49bfcbc5d4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -527,6 +527,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ + rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts new file mode 100644 index 000000000000..f36f6f459225 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -0,0 +1,250 @@ +/* + * Google Veyron Mickey Rev 0 board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" + +/ { + model = "Google Mickey"; + compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", + "google,veyron-mickey-rev6", "google,veyron-mickey-rev5", + "google,veyron-mickey-rev4", "google,veyron-mickey-rev3", + "google,veyron-mickey-rev2", "google,veyron-mickey-rev1", + "google,veyron-mickey-rev0", "google,veyron-mickey", + "google,veyron", "rockchip,rk3288"; + + vcc_5v: vcc-5v { + vin-supply = <&vcc33_sys>; + }; + + vcc33_io: vcc33_io { + compatible = "regulator-fixed"; + regulator-name = "vcc33_io"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc33_sys>; + }; +}; + +&cpu_thermal { + /delete-node/ trips; + /delete-node/ cooling-maps; + + trips { + cpu_alert_almost_warm: cpu_alert_almost_warm { + temperature = <63000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_warm: cpu_alert_warm { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_almost_hot: cpu_alert_almost_hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_hot: cpu_alert_hot { + temperature = <82000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_hotter: cpu_alert_hotter { + temperature = <84000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert_very_hot: cpu_alert_very_hot { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * After 1st level, throttle the CPU down to as low as 1.4 GHz + * and don't let the GPU go faster than 400 MHz. Note that we + * won't throttle the GPU lower than 400 MHz due to CPU + * heat--we'll let the GPU do the rest itself. + */ + cpu_warm_limit_cpu { + trip = <&cpu_alert_warm>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 4>; + }; + + /* + * Add some discrete steps to help throttling system deal + * with the fact that there are two passive cooling devices: + * the CPU and the GPU. + * + * - 1.2 GHz - 1.0 GHz (almost hot) + * - 800 MHz (hot) + * - 800 MHz - 696 MHz (hotter) + * - 696 MHz - min (very hot) + * + * Note: + * - 800 MHz appears to be a "sweet spot" for me. I can run + * some pretty serious workload here and be happy. + * - After 696 MHz we stop lowering voltage, so throttling + * past there is less effective. + */ + cpu_almost_hot_limit_cpu { + trip = <&cpu_alert_almost_hot>; + cooling-device = + <&cpu0 5 6>; + }; + cpu_hot_limit_cpu { + trip = <&cpu_alert_hot>; + cooling-device = + <&cpu0 7 7>; + }; + cpu_hotter_limit_cpu { + trip = <&cpu_alert_hotter>; + cooling-device = + <&cpu0 7 8>; + }; + cpu_very_hot_limit_cpu { + trip = <&cpu_alert_very_hot>; + cooling-device = + <&cpu0 8 THERMAL_NO_LIMIT>; + }; + }; +}; + +&emmc { + /delete-property/mmc-hs200-1_8v; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c4 { + status = "disabled"; +}; + +&i2s { + status = "okay"; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + /delete-property/ vcc6-supply; + /delete-property/ vcc12-supply; + + vcc11-supply = <&vcc33_sys>; + + regulators { + /* vcc33_io is sourced directly from vcc33_sys */ + /delete-node/ LDO_REG1; + /delete-node/ LDO_REG7; + + /* This is not a pwren anymore, but the real power supply */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-suspend-mem-disabled; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-suspend-mem-disabled; + }; + }; +}; + +&pinctrl { + hdmi { + power_hdmi_on: power-hdmi-on { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&usb_host0_ehci { + status = "disabled"; +}; + +&usb_host1 { + status = "disabled"; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&power_hdmi_on>; +}; From 0560d7c678ae9f4c67b7480f9a42a72c0655c5c5 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 2 Dec 2015 19:00:02 +0100 Subject: [PATCH 16/17] ARM: dts: rockchip: add touchscreen node to veyron minnie Minnie provides an elan,ekth3500 touchscreen over the display, so add the necessary node to enable it. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 8fd8ef2c72da..e999df74c19a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -117,6 +117,18 @@ &i2c3 { clock-frequency = <400000>; i2c-scl-falling-time-ns = <50>; i2c-scl-rising-time-ns = <300>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + vcc33-supply = <&vcc33_touch>; + vccio-supply = <&vcc33_touch>; + }; }; &rk808 { From 066111411101f6b020af1a7c752859a12476ba21 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 27 Nov 2015 23:35:00 +0100 Subject: [PATCH 17/17] ARM: dts: rockchip: add gpio-ir-receiver to the R89 board Add support for the IR receiver present on the R89 board. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-r89.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 14b9fc73c8a4..17f13c73fe5e 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -78,6 +78,13 @@ button@0 { }; }; + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -310,6 +317,12 @@ pwrbtn: pwrbtn { }; }; + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = ;