p71924506
/
linux_old1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN 

This patch changes iscsit_sequence_cmd() logic to no longer reject
non-immediate CmdSNs that exceed MaxCmdSN with a protocol error,
but instead silently ignore them.

This is done to correctly follow RFC-3720 Section 3.2.2.1:

   For non-immediate commands, the CmdSN field can take any
   value from ExpCmdSN to MaxCmdSN inclusive.  The target MUST silently
   ignore any non-immediate command outside of this range or non-
   immediate duplicates within the range.

Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This commit is contained in:
Nicholas Bellinger 2013-11-18 10:55:10 -08:00
parent 04f3b31bff
commit ea7e32bec1
2 changed files with 11 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/target/iscsi/iscsi_target_core.h
View File

@ -193,6 +193,7 @@ enum recover_cmdsn_ret_table {
CMDSN_NORMAL_OPERATION = 0,
CMDSN_LOWER_THAN_EXP = 1,
CMDSN_HIGHER_THAN_EXP = 2,
CMDSN_MAXCMDSN_OVERRUN = 3,
};
/* Used for iscsi_handle_immediate_data() return values */

18
drivers/target/iscsi/iscsi_target_util.c
View File

@ -242,9 +242,9 @@ static inline int iscsit_check_received_cmdsn(struct iscsi_session *sess, u32 cm
*/
if (iscsi_sna_gt(cmdsn, sess->max_cmd_sn)) {
pr_err("Received CmdSN: 0x%08x is greater than"
" MaxCmdSN: 0x%08x, protocol error.\n", cmdsn,
" MaxCmdSN: 0x%08x, ignoring.\n", cmdsn,
sess->max_cmd_sn);
ret = CMDSN_ERROR_CANNOT_RECOVER;
ret = CMDSN_MAXCMDSN_OVERRUN;
} else if (cmdsn == sess->exp_cmd_sn) {
sess->exp_cmd_sn++;
@ -303,14 +303,16 @@ int iscsit_sequence_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
ret = CMDSN_HIGHER_THAN_EXP;
break;
case CMDSN_LOWER_THAN_EXP:
case CMDSN_MAXCMDSN_OVERRUN:
default:
cmd->i_state = ISTATE_REMOVE;
iscsit_add_cmd_to_immediate_queue(cmd, conn, cmd->i_state);
ret = cmdsn_ret;
break;
default:
reason = ISCSI_REASON_PROTOCOL_ERROR;
reject = true;
ret = cmdsn_ret;
/*
* Existing callers for iscsit_sequence_cmd() will silently
* ignore commands with CMDSN_LOWER_THAN_EXP, so force this
* return for CMDSN_MAXCMDSN_OVERRUN as well..
*/
ret = CMDSN_LOWER_THAN_EXP;
break;
}
mutex_unlock(&conn->sess->cmdsn_mutex);