ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file.
Use the omap3-igep0020-common.dtsi file and remove repeated parts leaving the nodes that are not common between IGEPv2 hardware revisions. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Enric Balletbo i Serra
Tony Lindgren
parent
f19ed8e0ee
commit
ebc13bf2e0
|
|
@ -0,0 +1,246 @@
|
|||
/*
|
||||
* Common Device Tree Source for IGEPv2
|
||||
*
|
||||
* Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
|
||||
* Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "omap3-igep.dtsi"
|
||||
#include "omap-gpmc-smsc9221.dtsi"
|
||||
|
||||
/ {
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
compatible = "gpio-leds";
|
||||
|
||||
boot {
|
||||
label = "omap3:green:boot";
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user0 {
|
||||
label = "omap3:red:user0";
|
||||
gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user1 {
|
||||
label = "omap3:red:user1";
|
||||
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "omap3:green:user1";
|
||||
gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
/* HS USB Port 1 Power */
|
||||
hsusb1_power: hsusb1_power_reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hsusb1_vbus";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
|
||||
startup-delay-us = <70000>;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 1 */
|
||||
hsusb1_phy: hsusb1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
|
||||
vcc-supply = <&hsusb1_power>;
|
||||
};
|
||||
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@0 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
digital;
|
||||
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&tfp410_pins
|
||||
&dss_dpi_pins
|
||||
>;
|
||||
|
||||
tfp410_pins: pinmux_tfp410_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart2_pins: pinmux_uart2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
|
||||
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
|
||||
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
||||
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&hsusbb1_pins
|
||||
>;
|
||||
|
||||
hsusbb1_pins: pinmux_hsusbb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
|
||||
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
|
||||
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
|
||||
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
|
||||
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
|
||||
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
|
||||
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
||||
>;
|
||||
};
|
||||
|
||||
leds_pins: pinmux_leds_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
|
||||
OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
|
||||
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
/*
|
||||
* Display monitor features are burnt in the EEPROM
|
||||
* as EDID data.
|
||||
*/
|
||||
eeprom@50 {
|
||||
compatible = "ti,eeprom";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x00000000 0x20000000>,
|
||||
<5 0 0x2c000000 0x01000000>;
|
||||
|
||||
ethernet@gpmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&smsc9221_pins>;
|
||||
reg = <5 0 0xff>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port1-mode = "ehci-phy";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <&hsusb1_phy>;
|
||||
};
|
||||
|
||||
&vpll2 {
|
||||
/* Needed for DSS */
|
||||
regulator-name = "vdds_dsi";
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -9,42 +9,12 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "omap3-igep.dtsi"
|
||||
#include "omap-gpmc-smsc9221.dtsi"
|
||||
#include "omap3-igep0020-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
|
||||
compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
compatible = "gpio-leds";
|
||||
|
||||
boot {
|
||||
label = "omap3:green:boot";
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user0 {
|
||||
label = "omap3:red:user0";
|
||||
gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user1 {
|
||||
label = "omap3:red:user1";
|
||||
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user2 {
|
||||
label = "omap3:green:user1";
|
||||
gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
|
||||
lbee1usjyc_pdn: lbee1usjyc_pdn {
|
||||
compatible = "regulator-fixed";
|
||||
|
|
@ -65,112 +35,9 @@ lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
|
|||
gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
/* HS USB Port 1 Power */
|
||||
hsusb1_power: hsusb1_power_reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hsusb1_vbus";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
|
||||
startup-delay-us = <70000>;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 1 */
|
||||
hsusb1_phy: hsusb1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
|
||||
vcc-supply = <&hsusb1_power>;
|
||||
};
|
||||
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@0 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
digital;
|
||||
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&tfp410_pins
|
||||
&dss_dpi_pins
|
||||
>;
|
||||
|
||||
tfp410_pins: pinmux_tfp410_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
|
||||
lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
|
||||
|
|
@ -189,64 +56,6 @@ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
|
|||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&hsusbb1_pins
|
||||
>;
|
||||
|
||||
hsusbb1_pins: pinmux_hsusbb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
|
||||
OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
|
||||
OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
|
||||
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
|
||||
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
|
||||
OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
|
||||
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
|
||||
OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
||||
>;
|
||||
};
|
||||
|
||||
leds_pins: pinmux_leds_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
|
||||
OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
|
||||
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
/*
|
||||
* Display monitor features are burnt in the EEPROM
|
||||
* as EDID data.
|
||||
*/
|
||||
eeprom@50 {
|
||||
compatible = "ti,eeprom";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
|
||||
<5 0 0x2c000000 0x01000000>;
|
||||
|
||||
ethernet@gpmc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&smsc9221_pins>;
|
||||
reg = <5 0 0xff>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
/* On board Wifi module */
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -256,32 +65,3 @@ &mmc2 {
|
|||
bus-width = <4>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port1-mode = "ehci-phy";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <&hsusb1_phy>;
|
||||
};
|
||||
|
||||
&vpll2 {
|
||||
/* Needed for DSS */
|
||||
regulator-name = "vdds_dsi";
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue