dt-bindings: consolidate display related bindings

This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>

Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt

@@ -14,8 +14,8 @@ Required properties:
 -port@[X]: SoC specific port nodes with endpoint definitions as defined
    in Documentation/devicetree/bindings/media/video-interfaces.txt,
    please refer to the SoC specific binding document:
-    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
+    * Documentation/devicetree/bindings/display/imx/hdmi.txt
-    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+    * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
 
 Optional properties
 - reg-io-width: the width of the reg:1,4, default set to 1 if not present

Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/video/display-timing.txt.
+              Documentation/devicetree/bindings/display/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required

Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 
 Example:
 

Documentation/devicetree/bindings/display/exynos/exynos_dp.txt

@@ -50,7 +50,7 @@ Required properties for dp-controller:
 		number of lanes supported by the panel.
 			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
 	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/video/display-timing.txt
+		Documentation/devicetree/bindings/display/display-timing.txt
 
 Optional properties for dp-controller:
 	-interlaced:

Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -49,7 +49,7 @@ Video interfaces:
       mode
     - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
 
-[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -82,7 +82,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/video/display-timing.txt
+	Documentation/devicetree/bindings/display/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value

Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -63,7 +63,7 @@ Required properties:
 
 Optional properties (required if display-timings are used):
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/video/display-timing.txt.
+   Documentation/devicetree/bindings/display/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.

Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -28,7 +28,7 @@ Required properties:
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
-  See files in Documentation/devicetree/bindings/panel/ for each supported
+  See files in Documentation/devicetree/bindings/display/panel/ for each supported
   panel.
 - qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
   driving a panel which needs 2 DSI links.

Documentation/devicetree/bindings/display/panel/panel-dpi.txt

@@ -10,7 +10,7 @@ Optional properties:
 
 Required nodes:
 - "panel-timing" containing video timings
-  (Documentation/devicetree/bindings/video/display-timing.txt)
+  (Documentation/devicetree/bindings/display/display-timing.txt)
 - Video port for DPI input
 
 Example

Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt

@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 

Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt

@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt

@@ -9,7 +9,7 @@ Required properties:
 - compatible: Should be "rockchip,display-subsystem"
 - ports: Should contain a list of phandles pointing to display interface port
   of vop devices. vop definitions as defined in
-  Documentation/devicetree/bindings/video/rockchip-vop.txt
+  Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
 
 example:
 

Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt

@@ -184,7 +184,7 @@ of the following host1x client modules:
   - avdd-dsi-supply: phandle of a supply that powers the DSI controller
   - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
     which pads are used by this DSI output and need to be calibrated. See also
-    ../mipi/nvidia,tegra114-mipi.txt.
+    ../display/tegra/nvidia,tegra114-mipi.txt.
 
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing

Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt

@@ -1,7 +1,7 @@
 Texas Instruments DRA7x Display Subsystem
 =========================================
 
-See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
 description about OMAP Display Subsystem bindings.
 
 DSS Core