From f17e70d2586a81d69d7b011e81af0456fe65d658 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 1 Mar 2019 11:52:12 +0100 Subject: [PATCH] net: mvpp2: only update the XLG configuration when needed This patch improves the XLG configuration function, to only update the XLG configuration register when a change is needed. This helps not writing over and over the same XLG configuration each time phylink request the MAC to be configured. This mimics the GMAC configuration function. Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index e9cbbe871a1a..b1add5c6b75c 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -4505,10 +4505,11 @@ static void mvpp2_mac_an_restart(struct net_device *dev) static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode, const struct phylink_link_state *state) { - u32 ctrl0, ctrl4; + u32 old_ctrl0, ctrl0; + u32 old_ctrl4, ctrl4; - ctrl0 = readl(port->base + MVPP22_XLG_CTRL0_REG); - ctrl4 = readl(port->base + MVPP22_XLG_CTRL4_REG); + old_ctrl0 = ctrl0 = readl(port->base + MVPP22_XLG_CTRL0_REG); + old_ctrl4 = ctrl4 = readl(port->base + MVPP22_XLG_CTRL4_REG); if (state->pause & MLO_PAUSE_TX) ctrl0 |= MVPP22_XLG_CTRL0_TX_FLOW_CTRL_EN; @@ -4524,8 +4525,10 @@ static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode, ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC | MVPP22_XLG_CTRL4_EN_IDLE_CHECK; - writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG); - writel(ctrl4, port->base + MVPP22_XLG_CTRL4_REG); + if (old_ctrl0 != ctrl0) + writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG); + if (old_ctrl4 != ctrl4) + writel(ctrl4, port->base + MVPP22_XLG_CTRL4_REG); } static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,