From f879fc32aa0c96fbac261b3d857a1239d554ad01 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 6 May 2016 15:20:11 +0900 Subject: [PATCH] usb: host: xhci-rcar: Avoid long wait in xhci_reset() The firmware of R-Car USB 3.0 host controller will control the reset. So, if the xhci driver doesn't do firmware downloading (e.g. kernel configuration is CONFIG_USB_XHCI_PLATFORM=y and CONFIG_USB_XHCI_RCAR is not set), the reset of USB 3.0 host controller doesn't work correctly. Then, the host controller will cause long wait in xhci_reset() because the CMD_RESET bit of op_regs->command is not cleared for 10 seconds. So, this patch modifies the Kconfig to enable both CONFIG_USB_XHCI_PLATFORM and CONFIG_USB_XHCI_RCAR. Fixes: 4ac8918f3a7 (usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers) Cc: # v3.17+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3050b18b2447..e9d4dde3e9b3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -35,6 +35,7 @@ config USB_XHCI_PCI config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" + select USB_XHCI_RCAR if ARCH_RENESAS ---help--- Adds an xHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -63,7 +64,7 @@ config USB_XHCI_MVEBU config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" - select USB_XHCI_PLATFORM + depends on USB_XHCI_PLATFORM depends on ARCH_RENESAS || COMPILE_TEST ---help--- Say 'Y' to enable the support for the xHCI host controller