Merge branch 'linus' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

.gitignore

@@ -127,3 +127,7 @@ all.config
 
 # Kdevelop4
 *.kdev4
+
+#Automatically generated by ASN.1 compiler
+net/ipv4/netfilter/nf_nat_snmp_basic-asn1.c
+net/ipv4/netfilter/nf_nat_snmp_basic-asn1.h

Documentation/PCI/pci.txt

@@ -570,7 +570,9 @@ your driver if they're helpful, or just use plain hex constants.
 The device IDs are arbitrary hex numbers (vendor controlled) and normally used
 only in a single location, the pci_device_id table.
 
-Please DO submit new vendor/device IDs to http://pciids.sourceforge.net/.
+Please DO submit new vendor/device IDs to http://pci-ids.ucw.cz/.
+There are mirrors of the pci.ids file at http://pciids.sourceforge.net/
+and https://github.com/pciutils/pciids.
 
 
 

Documentation/devicetree/bindings/eeprom/at24.txt

@@ -38,9 +38,9 @@ Required properties:
 
                 "catalyst",
                 "microchip",
+                "nxp",
                 "ramtron",
                 "renesas",
-                "nxp",
                 "st",
 
                 Some vendors use different model names for chips which are just

Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt

@@ -14,6 +14,7 @@ Required properties:
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
     - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+    - "renesas,intc-ex-r8a77965" (R-Car M3-N)
     - "renesas,intc-ex-r8a77970" (R-Car V3M)
     - "renesas,intc-ex-r8a77995" (R-Car D3)
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -18,6 +18,7 @@ Required properties:
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
       - "renesas,etheravb-rcar-gen3" as a fallback for the above
 		R-Car Gen3 devices.

Documentation/devicetree/bindings/power/wakeup-source.txt

@@ -60,7 +60,7 @@ Examples
 		#size-cells = <0>;
 
 		button@1 {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <116>;
 			label = "POWER";

Documentation/devicetree/bindings/thermal/imx-thermal.txt

@@ -22,7 +22,32 @@ Optional properties:
 - clocks : thermal sensor's clock source.
 
 Example:
+ocotp: ocotp@21bc000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,imx6sx-ocotp", "syscon";
+	reg = <0x021bc000 0x4000>;
+	clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+	tempmon_calib: calib@38 {
+		reg = <0x38 4>;
+	};
+
+	tempmon_temp_grade: temp-grade@20 {
+		reg = <0x20 4>;
+	};
+};
+
+tempmon: tempmon {
+	compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,tempmon = <&anatop>;
+	nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+	nvmem-cell-names = "calib", "temp_grade";
+	clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+};
+
+Legacy method (Deprecated):
 tempmon {
 	compatible = "fsl,imx6q-tempmon";
 	fsl,tempmon = <&anatop>;

Documentation/gpu/tve200.rst

@@ -3,4 +3,4 @@
 ==================================
 
 .. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c
-   :doc: Faraday TV Encoder 200
+   :doc: Faraday TV Encoder TVE200 DRM Driver

Documentation/i2c/busses/i2c-i801

@@ -28,8 +28,10 @@ Supported adapters:
   * Intel Wildcat Point (PCH)
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
+  * Intel Braswell (SOC)
   * Intel Sunrise Point-H (PCH)
   * Intel Sunrise Point-LP (PCH)
+  * Intel Kaby Lake-H (PCH)
   * Intel DNV (SOC)
   * Intel Broxton (SOC)
   * Intel Lewisburg (PCH)

Documentation/ia64/serial.txt

@@ -111,7 +111,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 	- If you don't have an HCDP, the kernel doesn't know where
 	  your console lives until the driver discovers serial
-	  devices.  Use "console=uart, io,0x3f8" (or appropriate
+	  devices.  Use "console=uart,io,0x3f8" (or appropriate
 	  address for your machine).
 
     Kernel and init script output works fine, but no "login:" prompt:

Documentation/media/dmx.h.rst.exceptions

@@ -50,9 +50,15 @@ replace typedef dmx_filter_t :c:type:`dmx_filter`
 replace typedef dmx_pes_type_t :c:type:`dmx_pes_type`
 replace typedef dmx_input_t :c:type:`dmx_input`
 
-ignore symbol DMX_OUT_DECODER
-ignore symbol DMX_OUT_TAP
-ignore symbol DMX_OUT_TS_TAP
-ignore symbol DMX_OUT_TSDEMUX_TAP
+replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags`
+replace	symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags`
+
+replace symbol DMX_OUT_DECODER :c:type:`dmx_output`
+replace symbol DMX_OUT_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output`
+replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output`
 
 replace ioctl DMX_DQBUF dmx_qbuf

Documentation/media/uapi/dvb/dmx-qbuf.rst

@@ -51,9 +51,10 @@ out to disk. Buffers remain locked until dequeued, until the
 the device is closed.
 
 Applications call the ``DMX_DQBUF`` ioctl to dequeue a filled
-(capturing) buffer from the driver's outgoing queue. They just set the ``reserved`` field array to zero. When ``DMX_DQBUF`` is called with a
-pointer to this structure, the driver fills the remaining fields or
-returns an error code.
+(capturing) buffer from the driver's outgoing queue.
+They just set the ``index`` field withe the buffer ID to be queued.
+When ``DMX_DQBUF`` is called with a pointer to struct :c:type:`dmx_buffer`,
+the driver fills the remaining fields or returns an error code.
 
 By default ``DMX_DQBUF`` blocks when no buffer is in the outgoing
 queue. When the ``O_NONBLOCK`` flag was given to the

Documentation/networking/segmentation-offloads.txt

@@ -13,6 +13,7 @@ The following technologies are described:
  * Generic Segmentation Offload - GSO
  * Generic Receive Offload - GRO
  * Partial Generic Segmentation Offload - GSO_PARTIAL
+ * SCTP accelleration with GSO - GSO_BY_FRAGS
 
 TCP Segmentation Offload
 ========================
@@ -49,6 +50,10 @@ datagram into multiple IPv4 fragments.  Many of the requirements for UDP
 fragmentation offload are the same as TSO.  However the IPv4 ID for
 fragments should not increment as a single IPv4 datagram is fragmented.
 
+UFO is deprecated: modern kernels will no longer generate UFO skbs, but can
+still receive them from tuntap and similar devices. Offload of UDP-based
+tunnel protocols is still supported.
+
 IPIP, SIT, GRE, UDP Tunnel, and Remote Checksum Offloads
 ========================================================
 
@@ -83,10 +88,10 @@ SKB_GSO_UDP_TUNNEL_CSUM.  These two additional tunnel types reflect the
 fact that the outer header also requests to have a non-zero checksum
 included in the outer header.
 
-Finally there is SKB_GSO_REMCSUM which indicates that a given tunnel header
-has requested a remote checksum offload.  In this case the inner headers
-will be left with a partial checksum and only the outer header checksum
-will be computed.
+Finally there is SKB_GSO_TUNNEL_REMCSUM which indicates that a given tunnel
+header has requested a remote checksum offload.  In this case the inner
+headers will be left with a partial checksum and only the outer header
+checksum will be computed.
 
 Generic Segmentation Offload
 ============================
@@ -128,3 +133,28 @@ values for if the header was simply duplicated.  The one exception to this
 is the outer IPv4 ID field.  It is up to the device drivers to guarantee
 that the IPv4 ID field is incremented in the case that a given header does
 not have the DF bit set.
+
+SCTP accelleration with GSO
+===========================
+
+SCTP - despite the lack of hardware support - can still take advantage of
+GSO to pass one large packet through the network stack, rather than
+multiple small packets.
+
+This requires a different approach to other offloads, as SCTP packets
+cannot be just segmented to (P)MTU. Rather, the chunks must be contained in
+IP segments, padding respected. So unlike regular GSO, SCTP can't just
+generate a big skb, set gso_size to the fragmentation point and deliver it
+to IP layer.
+
+Instead, the SCTP protocol layer builds an skb with the segments correctly
+padded and stored as chained skbs, and skb_segment() splits based on those.
+To signal this, gso_size is set to the special value GSO_BY_FRAGS.
+
+Therefore, any code in the core networking stack must be aware of the
+possibility that gso_size will be GSO_BY_FRAGS and handle that case
+appropriately. (For size checks, the skb_gso_validate_*_len family of
+helpers do this automatically.)
+
+This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits
+set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE.

Documentation/virtual/kvm/api.txt

@@ -123,14 +123,15 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
 flag KVM_VM_MIPS_VZ.
 
 
-4.3 KVM_GET_MSR_INDEX_LIST
+4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST
 
-Capability: basic
+Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST
 Architectures: x86
-Type: system
+Type: system ioctl
 Parameters: struct kvm_msr_list (in/out)
 Returns: 0 on success; -1 on error
 Errors:
+  EFAULT:    the msr index list cannot be read from or written to
   E2BIG:     the msr index list is to be to fit in the array specified by
              the user.
 
@@ -139,16 +140,23 @@ struct kvm_msr_list {
 	__u32 indices[0];
 };
 
-This ioctl returns the guest msrs that are supported.  The list varies
-by kvm version and host processor, but does not change otherwise.  The
-user fills in the size of the indices array in nmsrs, and in return
-kvm adjusts nmsrs to reflect the actual number of msrs and fills in
-the indices array with their numbers.
+The user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in the
+indices array with their numbers.
+
+KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported.  The list
+varies by kvm version and host processor, but does not change otherwise.
 
 Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
 not returned in the MSR list, as different vcpus can have a different number
 of banks, as set via the KVM_X86_SETUP_MCE ioctl.
 
+KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed
+to the KVM_GET_MSRS system ioctl.  This lets userspace probe host capabilities
+and processor features that are exposed via MSRs (e.g., VMX capabilities).
+This list also varies by kvm version and host processor, but does not change
+otherwise.
+
 
 4.4 KVM_CHECK_EXTENSION
 
@@ -475,14 +483,22 @@ Support for this has been removed.  Use KVM_SET_GUEST_DEBUG instead.
 
 4.18 KVM_GET_MSRS
 
-Capability: basic
+Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system)
 Architectures: x86
-Type: vcpu ioctl
+Type: system ioctl, vcpu ioctl
 Parameters: struct kvm_msrs (in/out)
-Returns: 0 on success, -1 on error
+Returns: number of msrs successfully returned;
+        -1 on error
 
+When used as a system ioctl:
+Reads the values of MSR-based features that are available for the VM.  This
+is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values.
+The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST
+in a system ioctl.
+
+When used as a vcpu ioctl:
 Reads model-specific registers from the vcpu.  Supported msr indices can
-be obtained using KVM_GET_MSR_INDEX_LIST.
+be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl.
 
 struct kvm_msrs {
 	__u32 nmsrs; /* number of msrs in entries */

Documentation/virtual/kvm/cpuid.txt

@@ -58,6 +58,10 @@ KVM_FEATURE_PV_TLB_FLUSH           ||     9 || guest checks this feature bit
                                    ||       || before enabling paravirtualized
                                    ||       || tlb flush.
 ------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF_VMEXIT        ||    10 || paravirtualized async PF VM exit
+                                   ||       || can be enabled by setting bit 2
+                                   ||       || when writing to msr 0x4b564d02
+------------------------------------------------------------------------------
 KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
                                    ||       || per-cpu warps are expected in
                                    ||       || kvmclock.

Documentation/virtual/kvm/msr.txt

@@ -170,7 +170,8 @@ MSR_KVM_ASYNC_PF_EN: 0x4b564d02
 	when asynchronous page faults are enabled on the vcpu 0 when
 	disabled. Bit 1 is 1 if asynchronous page faults can be injected
 	when vcpu is in cpl == 0. Bit 2 is 1 if asynchronous page faults
-	are delivered to L1 as #PF vmexits.
+	are delivered to L1 as #PF vmexits.  Bit 2 can be set only if
+	KVM_FEATURE_ASYNC_PF_VMEXIT is present in CPUID.
 
 	First 4 byte of 64 byte memory location will be written to by
 	the hypervisor at the time of asynchronous page fault (APF)

Documentation/x86/intel_rdt_ui.txt

@@ -671,7 +671,7 @@ occupancy of the real time threads on these cores.
 # mkdir p1
 
 Move the cpus 4-7 over to p1
-# echo f0 > p0/cpus
+# echo f0 > p1/cpus
 
 View the llc occupancy snapshot
 

Documentation/x86/topology.txt

@@ -108,7 +108,7 @@ The topology of a system is described in the units of:
 
     The number of online threads is also printed in /proc/cpuinfo "siblings."
 
-  - topology_sibling_mask():
+  - topology_sibling_cpumask():
 
     The cpumask contains all online threads in the core to which a thread
     belongs.

MAINTAINERS

@@ -1238,7 +1238,7 @@ F:	drivers/clk/at91
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
@@ -1590,7 +1590,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/dove/
@@ -1604,7 +1604,7 @@ F:	arch/arm/boot/dts/orion5x*
 ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -1999,8 +1999,10 @@ M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
 M:	Alexandre Torgue <alexandre.torgue@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
 N:	stm32
+F:	arch/arm/boot/dts/stm32*
+F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
 
 ARM/TANGO ARCHITECTURE
@@ -7600,8 +7602,10 @@ F:	mm/kasan/
 F:	scripts/Makefile.kasan
 
 KCONFIG
+M:	Masahiro Yamada <yamada.masahiro@socionext.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kconfig
 L:	linux-kbuild@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
 
@@ -7909,7 +7913,6 @@ S:	Maintained
 F:	scripts/leaking_addresses.pl
 
 LED SUBSYSTEM
-M:	Richard Purdie <rpurdie@rpsys.net>
 M:	Jacek Anaszewski <jacek.anaszewski@gmail.com>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-leds@vger.kernel.org
@@ -10927,6 +10930,17 @@ L:	linux-gpio@vger.kernel.org
 S:	Supported
 F:	drivers/pinctrl/pinctrl-at91-pio4.*
 
+PIN CONTROLLER - FREESCALE
+M:	Dong Aisheng <aisheng.dong@nxp.com>
+M:	Fabio Estevam <festevam@gmail.com>
+M:	Shawn Guo <shawnguo@kernel.org>
+M:	Stefan Agner <stefan@agner.ch>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+F:	drivers/pinctrl/freescale/
+F:	Documentation/devicetree/bindings/pinctrl/fsl,*
+
 PIN CONTROLLER - INTEL
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Heikki Krogerus <heikki.krogerus@linux.intel.com>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -388,7 +388,7 @@ PYTHON		= python
 CHECK		= sparse
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-		  -Wbitwise -Wno-return-void $(CF)
+		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 NOSTDINC_FLAGS  =
 CFLAGS_MODULE   =
 AFLAGS_MODULE   =
@@ -489,6 +489,11 @@ KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
 endif
 
+RETPOLINE_CFLAGS_GCC := -mindirect-branch=thunk-extern -mindirect-branch-register
+RETPOLINE_CFLAGS_CLANG := -mretpoline-external-thunk
+RETPOLINE_CFLAGS := $(call cc-option,$(RETPOLINE_CFLAGS_GCC),$(call cc-option,$(RETPOLINE_CFLAGS_CLANG)))
+export RETPOLINE_CFLAGS
+
 ifeq ($(config-targets),1)
 # ===========================================================================
 # *config targets only - make sure prerequisites are updated, and descend
@@ -579,10 +584,9 @@ ifeq ($(KBUILD_EXTMOD),)
 # To avoid any implicit rule to kick in, define an empty command
 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 
-# If .config is newer than include/config/auto.conf, someone tinkered
-# with it and forgot to run make oldconfig.
-# if auto.conf.cmd is missing then we are probably in a cleaned tree so
-# we execute the config step to be sure to catch updated Kconfig files
+# The actual configuration files used during the build are stored in
+# include/generated/ and include/config/. Update them if .config is newer than
+# include/config/auto.conf (which mirrors .config).
 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
@@ -857,8 +861,7 @@ KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
 KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
-LDFLAGS_BUILD_ID := $(patsubst -Wl$(comma)%,%,\
-			      $(call cc-ldoption, -Wl$(comma)--build-id,))
+LDFLAGS_BUILD_ID := $(call ld-option, --build-id)
 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 

arch/alpha/include/asm/cmpxchg.h

@@ -6,7 +6,6 @@
  * Atomic exchange routines.
  */
 
-#define __ASM__MB
 #define ____xchg(type, args...)		__xchg ## type ## _local(args)
 #define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
 #include <asm/xchg.h>
@@ -33,10 +32,6 @@
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
 #undef ____xchg
 #undef ____cmpxchg
 #define ____xchg(type, args...)		__xchg ##type(args)
@@ -64,7 +59,6 @@
 	cmpxchg((ptr), (o), (n));					\
 })
 
-#undef __ASM__MB
 #undef ____cmpxchg
 
 #endif /* _ALPHA_CMPXCHG_H */

arch/alpha/include/asm/xchg.h

@@ -12,6 +12,10 @@
  * Atomic exchange.
  * Since it can be used to implement critical sections
  * it must clobber "memory" (also for interrupts in UP).
+ *
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
  */
 
 static inline unsigned long
@@ -19,6 +23,7 @@ ____xchg(_u8, volatile char *m, unsigned long val)
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	insbl	%1,%4,%1\n"
@@ -28,12 +33,12 @@ ____xchg(_u8, volatile char *m, unsigned long val)
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%3)\n"
 	"	beq	%2,2f\n"
-		__ASM__MB
 	".subsection 2\n"
 	"2:	br	1b\n"
 	".previous"
 	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
 	: "r" ((long)m), "1" (val) : "memory");
+	smp_mb();
 
 	return ret;
 }
@@ -43,6 +48,7 @@ ____xchg(_u16, volatile short *m, unsigned long val)
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	inswl	%1,%4,%1\n"
@@ -52,12 +58,12 @@ ____xchg(_u16, volatile short *m, unsigned long val)
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%3)\n"
 	"	beq	%2,2f\n"
-		__ASM__MB
 	".subsection 2\n"
 	"2:	br	1b\n"
 	".previous"
 	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
 	: "r" ((long)m), "1" (val) : "memory");
+	smp_mb();
 
 	return ret;
 }
@@ -67,17 +73,18 @@ ____xchg(_u32, volatile int *m, unsigned long val)
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%4\n"
 	"	bis $31,%3,%1\n"
 	"	stl_c %1,%2\n"
 	"	beq %1,2f\n"
-		__ASM__MB
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	: "=&r" (val), "=&r" (dummy), "=m" (*m)
 	: "rI" (val), "m" (*m) : "memory");
+	smp_mb();
 
 	return val;
 }
@@ -87,17 +94,18 @@ ____xchg(_u64, volatile long *m, unsigned long val)
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%4\n"
 	"	bis $31,%3,%1\n"
 	"	stq_c %1,%2\n"
 	"	beq %1,2f\n"
-		__ASM__MB
 	".subsection 2\n"
 	"2:	br 1b\n"
 	".previous"
 	: "=&r" (val), "=&r" (dummy), "=m" (*m)
 	: "rI" (val), "m" (*m) : "memory");
+	smp_mb();
 
 	return val;
 }
@@ -128,10 +136,12 @@ ____xchg(, volatile void *ptr, unsigned long x, int size)
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  *
- * The memory barrier should be placed in SMP only when we actually
- * make the change. If we don't change anything (so if the returned
- * prev is equal to old) then we aren't acquiring anything new and
- * we don't need any memory barrier as far I can tell.
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
+ * The trailing memory barrier is placed in SMP unconditionally, in
+ * order to guarantee that dependency ordering is preserved when a
+ * dependency is headed by an unsuccessful operation.
  */
 
 static inline unsigned long
@@ -139,6 +149,7 @@ ____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	insbl	%1,%5,%1\n"
@@ -150,13 +161,13 @@ ____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
 	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
 	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+	smp_mb();
 
 	return prev;
 }
@@ -166,6 +177,7 @@ ____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	inswl	%1,%5,%1\n"
@@ -177,13 +189,13 @@ ____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
 	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
 	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+	smp_mb();
 
 	return prev;
 }
@@ -193,6 +205,7 @@ ____cmpxchg(_u32, volatile int *m, int old, int new)
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -200,13 +213,13 @@ ____cmpxchg(_u32, volatile int *m, int old, int new)
 	"	mov %4,%1\n"
 	"	stl_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
 	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
 	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+	smp_mb();
 
 	return prev;
 }
@@ -216,6 +229,7 @@ ____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -223,13 +237,13 @@ ____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
 	"	mov %4,%1\n"
 	"	stq_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
 	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
 	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+	smp_mb();
 
 	return prev;
 }

arch/arc/Kconfig

@@ -484,7 +484,6 @@ config ARC_CURR_IN_REG
 
 config ARC_EMUL_UNALIGNED
 	bool "Emulate unaligned memory access (userspace only)"
-	default N
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	depends on ISA_ARCOMPACT

arch/arc/boot/dts/axs101.dts

@@ -17,6 +17,6 @@ / {
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1";
 	};
 };

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -214,13 +214,13 @@ adv7511_output: endpoint {
 			};
 
 			eeprom@0x54{
-				compatible = "24c01";
+				compatible = "atmel,24c01";
 				reg = <0x54>;
 				pagesize = <0x8>;
 			};
 
 			eeprom@0x57{
-				compatible = "24c04";
+				compatible = "atmel,24c04";
 				reg = <0x57>;
 				pagesize = <0x8>;
 			};

arch/arc/boot/dts/haps_hs_idu.dts

@@ -22,7 +22,7 @@ memory {
 	};
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_700.dts

@@ -17,7 +17,7 @@ / {
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_hs.dts

@@ -24,7 +24,7 @@ memory {
 	};
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_hs_idu.dts

@@ -15,7 +15,7 @@ / {
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci.dts

@@ -20,7 +20,7 @@ chosen {
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci_hs.dts

@@ -20,7 +20,7 @@ chosen {
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -18,7 +18,7 @@ / {
 
 	chosen {
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/include/asm/bug.h

@@ -23,7 +23,8 @@ void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #define BUG()	do {								\
 	pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
-	dump_stack();								\
+	barrier_before_unreachable();						\
+	__builtin_trap();							\
 } while (0)
 
 #define HAVE_ARCH_BUG

arch/arc/include/asm/entry-arcv2.h

@@ -184,7 +184,7 @@
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
 	bic     r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
-	or      r9, r9, (STATUS_L_MASK|STATUS_IE_MASK)
+	or      r9, r9, STATUS_IE_MASK
 	kflag   r9
 .endm
 

arch/arc/kernel/mcip.c

@@ -22,10 +22,79 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 
 static char smp_cpuinfo_buf[128];
 
+/*
+ * Set mask to halt GFRC if any online core in SMP cluster is halted.
+ * Only works for ARC HS v3.0+, on earlier versions has no effect.
+ */
+static void mcip_update_gfrc_halt_mask(int cpu)
+{
+	struct bcr_generic gfrc;
+	unsigned long flags;
+	u32 gfrc_halt_mask;
+
+	READ_BCR(ARC_REG_GFRC_BUILD, gfrc);
+
+	/*
+	 * CMD_GFRC_SET_CORE and CMD_GFRC_READ_CORE commands were added in
+	 * GFRC 0x3 version.
+	 */
+	if (gfrc.ver < 0x3)
+		return;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	__mcip_cmd(CMD_GFRC_READ_CORE, 0);
+	gfrc_halt_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+	gfrc_halt_mask |= BIT(cpu);
+	__mcip_cmd_data(CMD_GFRC_SET_CORE, 0, gfrc_halt_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_update_debug_halt_mask(int cpu)
+{
+	u32 mcip_mask = 0;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/*
+	 * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
+	 * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
+	 * and CMD_DEBUG_READ_SELECT.
+	 */
+	__mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
+	mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+	mcip_mask |= BIT(cpu);
+
+	__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
+	/*
+	 * Parameter specified halt cause:
+	 * STATUS32[H]/actionpoint/breakpoint/self-halt
+	 * We choose all of them (0xF).
+	 */
+	__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
 static void mcip_setup_per_cpu(int cpu)
 {
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
 	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
+
+	/* Update GFRC halt mask as new CPU came online */
+	if (mp.gfrc)
+		mcip_update_gfrc_halt_mask(cpu);
+
+	/* Update MCIP debug mask as new CPU came online */
+	if (mp.dbg)
+		mcip_update_debug_halt_mask(cpu);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -101,11 +170,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
-
-	if (mp.dbg) {
-		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
-		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
-	}
 }
 
 struct plat_smp_ops plat_smp_ops = {

arch/arc/kernel/setup.c

@@ -51,7 +51,7 @@ static const struct id_to_str arc_cpu_rel[] = {
 	{ 0x51, "R2.0" },
 	{ 0x52, "R2.1" },
 	{ 0x53, "R3.0" },
-	{ 0x54, "R4.0" },
+	{ 0x54, "R3.10a" },
 #endif
 	{ 0x00, NULL   }
 };
@@ -373,7 +373,7 @@ static void arc_chk_core_config(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	int saved = 0, present = 0;
-	char *opt_nm = NULL;;
+	char *opt_nm = NULL;
 
 	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");

arch/arc/kernel/smp.c

@@ -24,6 +24,7 @@
 #include <linux/reboot.h>
 #include <linux/irqdomain.h>
 #include <linux/export.h>
+#include <linux/of_fdt.h>
 
 #include <asm/processor.h>
 #include <asm/setup.h>
@@ -47,6 +48,42 @@ void __init smp_prepare_boot_cpu(void)
 {
 }
 
+static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
+{
+	unsigned long dt_root = of_get_flat_dt_root();
+	const char *buf;
+
+	buf = of_get_flat_dt_prop(dt_root, name, NULL);
+	if (!buf)
+		return -EINVAL;
+
+	if (cpulist_parse(buf, cpumask))
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Read from DeviceTree and setup cpu possible mask. If there is no
+ * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist.
+ */
+static void __init arc_init_cpu_possible(void)
+{
+	struct cpumask cpumask;
+
+	if (arc_get_cpu_map("possible-cpus", &cpumask)) {
+		pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",
+			NR_CPUS);
+
+		cpumask_setall(&cpumask);
+	}
+
+	if (!cpumask_test_cpu(0, &cpumask))
+		panic("Master cpu (cpu[0]) is missed in cpu possible mask!");
+
+	init_cpu_possible(&cpumask);
+}
+
 /*
  * Called from setup_arch() before calling setup_processor()
  *
@@ -58,10 +95,7 @@ void __init smp_prepare_boot_cpu(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		set_cpu_possible(i, true);
+	arc_init_cpu_possible();
 
 	if (plat_smp_ops.init_early_smp)
 		plat_smp_ops.init_early_smp();
@@ -70,16 +104,12 @@ void __init smp_init_cpus(void)
 /* called from init ( ) =>  process 1 */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	/*
 	 * if platform didn't set the present map already, do it now
 	 * boot cpu is set to present already by init/main.c
 	 */
-	if (num_present_cpus() <= 1) {
-		for (i = 0; i < max_cpus; i++)
-			set_cpu_present(i, true);
-	}
+	if (num_present_cpus() <= 1)
+		init_cpu_present(cpu_possible_mask);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)

arch/arc/kernel/unwind.c

@@ -366,7 +366,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 	return;
 
 ret_err:
-	panic("Attention !!! Dwarf FDE parsing errors\n");;
+	panic("Attention !!! Dwarf FDE parsing errors\n");
 }
 
 #ifdef CONFIG_MODULES

arch/arc/mm/cache.c

@@ -780,7 +780,10 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(r, ctrl);
 
-	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		write_aux_reg(ARC_REG_SLC_INVALIDATE, 0x1);
+	else
+		write_aux_reg(ARC_REG_SLC_FLUSH, 0x1);
 
 	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
 	read_aux_reg(r);

arch/arm/boot/dts/bcm11351.dtsi

@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm21664.dtsi

@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404e000 {
+	smc@3404e000 {
 		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm2835.dtsi

@@ -18,10 +18,10 @@ cpu@0 {
 	soc {
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
 
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
 	};
 };
 

arch/arm/boot/dts/bcm2836.dtsi

@@ -9,19 +9,19 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
+	};
 
-		arm-pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupt-parent = <&local_intc>;
-			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-		};
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {

arch/arm/boot/dts/bcm2837.dtsi

@@ -8,7 +8,7 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;

arch/arm/boot/dts/bcm283x.dtsi

@@ -465,7 +465,7 @@ thermal: thermal@7e212000 {
 			status = "disabled";
 		};
 
-		aux: aux@0x7e215000 {
+		aux: aux@7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
 			reg = <0x7e215000 0x8>;

arch/arm/boot/dts/bcm958625hr.dts

@@ -49,7 +49,7 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {

arch/arm/boot/dts/gemini-dlink-dns-313.dts

@@ -269,7 +269,7 @@ conf7 {
 
 		sata: sata@46000000 {
 			/* The ROM uses this muxmode */
-			cortina,gemini-ata-muxmode = <3>;
+			cortina,gemini-ata-muxmode = <0>;
 			cortina,gemini-enable-sata-bridge;
 			status = "okay";
 		};

arch/arm/boot/dts/imx6dl-icore-rqs.dts

@@ -42,7 +42,7 @@
 
 /dts-v1/;
 
-#include "imx6q.dtsi"
+#include "imx6dl.dtsi"
 #include "imx6qdl-icore-rqs.dtsi"
 
 / {

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -71,6 +71,8 @@ nand@0,0 {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -189,7 +191,12 @@ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
 
-
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -66,6 +66,8 @@ nand@0,0 {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -136,6 +138,12 @@ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &uart2 {

arch/arm/boot/dts/omap5-uevm.dts

@@ -47,7 +47,7 @@ btn1 {
 			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
 			wakeup-source;
 			autorepeat;
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 		};
 	};
 

arch/arm/boot/dts/rk3036.dtsi

@@ -280,7 +280,7 @@ sdio: dwmmc@10218000 {
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO>;
@@ -298,7 +298,7 @@ emmc: dwmmc@1021c000 {
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;

arch/arm/boot/dts/rk322x.dtsi

@@ -621,7 +621,7 @@ sdmmc: dwmmc@30000000 {
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -634,7 +634,7 @@ sdio: dwmmc@30010000 {
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
@@ -649,7 +649,7 @@ emmc: dwmmc@30020000 {
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		fifo-depth = <0x100>;

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -110,26 +110,6 @@ vdd_misc_1v8: vdd-misc-1v8 {
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000	1400000
-		1608000	1350000
-		1512000 1300000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 312000  900000
-		 216000  900000
-		 126000  900000
-	>;
-};
-
 &emmc {
 	status = "okay";
 	bus-width = <8>;

arch/arm/boot/dts/zx296702.dtsi

@@ -56,7 +56,7 @@ global_timer: timer@8000200 {
 			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
 		};
 
-		l2cc: l2-cache-controller@0x00c00000 {
+		l2cc: l2-cache-controller@c00000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00c00000 0x1000>;
 			cache-unified;
@@ -67,30 +67,30 @@ l2cc: l2-cache-controller@0x00c00000 {
 			arm,double-linefill-incr = <0>;
 		};
 
-		pcu: pcu@0xa0008000 {
+		pcu: pcu@a0008000 {
 			compatible = "zte,zx296702-pcu";
 			reg = <0xa0008000 0x1000>;
 		};
 
-		topclk: topclk@0x09800000 {
+		topclk: topclk@9800000 {
 			compatible = "zte,zx296702-topcrm-clk";
 			reg = <0x09800000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp1clk: lsp1clk@0x09400000 {
+		lsp1clk: lsp1clk@9400000 {
 			compatible = "zte,zx296702-lsp1crpm-clk";
 			reg = <0x09400000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp0clk: lsp0clk@0x0b000000 {
+		lsp0clk: lsp0clk@b000000 {
 			compatible = "zte,zx296702-lsp0crpm-clk";
 			reg = <0x0b000000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		uart0: serial@0x09405000 {
+		uart0: serial@9405000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09405000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@ uart0: serial@0x09405000 {
 			status = "disabled";
 		};
 
-		uart1: serial@0x09406000 {
+		uart1: serial@9406000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09406000 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@ uart1: serial@0x09406000 {
 			status = "disabled";
 		};
 
-		mmc0: mmc@0x09408000 {
+		mmc0: mmc@9408000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -119,7 +119,7 @@ mmc0: mmc@0x09408000 {
 			status = "disabled";
 		};
 
-		mmc1: mmc@0x0b003000 {
+		mmc1: mmc@b003000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -132,7 +132,7 @@ mmc1: mmc@0x0b003000 {
 			status = "disabled";
 		};
 
-		sysctrl: sysctrl@0xa0007000 {
+		sysctrl: sysctrl@a0007000 {
 			compatible = "zte,sysctrl", "syscon";
 			reg = <0xa0007000 0x1000>;
 		};

arch/arm/configs/omap2plus_defconfig

@@ -319,7 +319,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_RC_CORE=m
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_LIRC=m
+CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_RX51=m
 CONFIG_V4L_PLATFORM_DRIVERS=y

arch/arm/kernel/time.c

@@ -83,7 +83,7 @@ static void dummy_clock_access(struct timespec64 *ts)
 }
 
 static clock_access_fn __read_persistent_clock = dummy_clock_access;
-static clock_access_fn __read_boot_clock = dummy_clock_access;;
+static clock_access_fn __read_boot_clock = dummy_clock_access;
 
 void read_persistent_clock64(struct timespec64 *ts)
 {

arch/arm/kvm/hyp/Makefile

@@ -7,6 +7,8 @@ ccflags-y += -fno-stack-protector -DDISABLE_BRANCH_PROFILING
 
 KVM=../../../../virt/kvm
 
+CFLAGS_ARMV7VE		   :=$(call cc-option, -march=armv7ve)
+
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
@@ -15,7 +17,10 @@ obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
 obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
 obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
+CFLAGS_banked-sr.o	   += $(CFLAGS_ARMV7VE)
+
 obj-$(CONFIG_KVM_ARM_HOST) += entry.o
 obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
 obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+CFLAGS_switch.o		   += $(CFLAGS_ARMV7VE)
 obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o

arch/arm/kvm/hyp/banked-sr.c

@@ -20,6 +20,10 @@
 
 #include <asm/kvm_hyp.h>
 
+/*
+ * gcc before 4.9 doesn't understand -march=armv7ve, so we have to
+ * trick the assembler.
+ */
 __asm__(".arch_extension     virt");
 
 void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt)

arch/arm/mach-clps711x/board-dt.c

@@ -69,7 +69,7 @@ static void clps711x_restart(enum reboot_mode mode, const char *cmd)
 	soft_restart(0);
 }
 
-static const char *clps711x_compat[] __initconst = {
+static const char *const clps711x_compat[] __initconst = {
 	"cirrus,ep7209",
 	NULL
 };

arch/arm/mach-davinci/board-dm355-evm.c

@@ -368,7 +368,7 @@ static struct spi_eeprom at25640a = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640a,

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -217,7 +217,7 @@ static struct spi_eeprom at25640a = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640a,

arch/arm/mach-davinci/board-dm365-evm.c

@@ -726,7 +726,7 @@ static struct spi_eeprom at25640 = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm365_evm_spi_info[] __initconst = {
+static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640,

arch/arm/mach-mvebu/Kconfig

@@ -41,7 +41,7 @@ config MACH_ARMADA_375
 	depends on ARCH_MULTI_V7
 	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARMADA_375_CLK
 	select HAVE_ARM_SCU
@@ -57,7 +57,7 @@ config MACH_ARMADA_38X
 	bool "Marvell Armada 380/385 boards"
 	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

arch/arm/mach-omap1/clock.c

@@ -1011,17 +1011,17 @@ static int clk_debugfs_register_one(struct clk *c)
 		return -ENOMEM;
 	c->dent = d;
 
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -299,8 +299,6 @@ static void irq_save_context(void)
 	if (soc_is_dra7xx())
 		return;
 
-	if (!sar_base)
-		sar_base = omap4_get_sar_ram_base();
 	if (wakeupgen_ops && wakeupgen_ops->save_context)
 		wakeupgen_ops->save_context();
 }
@@ -598,6 +596,8 @@ static int __init wakeupgen_init(struct device_node *node,
 	irq_hotplug_init();
 	irq_pm_init();
 
+	sar_base = omap4_get_sar_ram_base();
+
 	return 0;
 }
 IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);

arch/arm/mach-omap2/omap_hwmod.c

@@ -977,6 +977,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_enable_optional_clocks(oh);
+
 	if (oh->_clk)
 		clk_enable(oh->_clk);
 
@@ -985,9 +988,6 @@ static int _enable_clocks(struct omap_hwmod *oh)
 			clk_enable(os->_clk);
 	}
 
-	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
-		_enable_optional_clocks(oh);
-
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;

arch/arm/mach-omap2/pm.c

@@ -186,7 +186,7 @@ static void omap_pm_end(void)
 	cpu_idle_poll_ctrl(false);
 }
 
-static void omap_pm_finish(void)
+static void omap_pm_wake(void)
 {
 	if (soc_is_omap34xx())
 		omap_prcm_irq_complete();
@@ -196,7 +196,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap_pm_begin,
 	.end		= omap_pm_end,
 	.enter		= omap_pm_enter,
-	.finish		= omap_pm_finish,
+	.wake		= omap_pm_wake,
 	.valid		= suspend_valid_only_mem,
 };
 

arch/arm/mach-omap2/timer.c

@@ -156,12 +156,6 @@ static struct clock_event_device clockevent_gpt = {
 	.tick_resume		= omap2_gp_timer_shutdown,
 };
 
-static struct property device_disabled = {
-	.name = "status",
-	.length = sizeof("disabled"),
-	.value = "disabled",
-};
-
 static const struct of_device_id omap_timer_match[] __initconst = {
 	{ .compatible = "ti,omap2420-timer", },
 	{ .compatible = "ti,omap3430-timer", },
@@ -203,8 +197,17 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 				  of_get_property(np, "ti,timer-secure", NULL)))
 			continue;
 
-		if (!of_device_is_compatible(np, "ti,omap-counter32k"))
-			of_add_property(np, &device_disabled);
+		if (!of_device_is_compatible(np, "ti,omap-counter32k")) {
+			struct property *prop;
+
+			prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+			if (!prop)
+				return NULL;
+			prop->name = "status";
+			prop->value = "disabled";
+			prop->length = strlen(prop->value);
+			of_add_property(np, prop);
+		}
 		return np;
 	}
 

arch/arm/mach-orion5x/Kconfig

@@ -58,7 +58,6 @@ config MACH_KUROBOX_PRO
 
 config MACH_DNS323
 	bool "D-Link DNS-323"
-	select GENERIC_NET_UTILS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -66,7 +65,6 @@ config MACH_DNS323
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
-	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
@@ -101,7 +99,6 @@ config MACH_LINKSTATION_LS_HGL
 
 config MACH_TS409
 	bool "QNAP TS-409"
-	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.

arch/arm/mach-orion5x/dns323-setup.c

@@ -173,10 +173,42 @@ static struct mv643xx_eth_platform_data dns323_eth_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
 };
 
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = dns323_parse_hex_nibble(b[0]);
+	lo = dns323_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
 static int __init dns323_read_mac_addr(void)
 {
 	u_int8_t addr[6];
-	void __iomem *mac_page;
+	int i;
+	char *mac_page;
 
 	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
 	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
@@ -185,8 +217,23 @@ static int __init dns323_read_mac_addr(void)
 	if (!mac_page)
 		return -ENOMEM;
 
-	if (!mac_pton((__force const char *) mac_page, addr))
-		goto error_fail;
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+		if (*(mac_page + (i * 3) + 2) != ':') {
+			goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++)	{
+		int byte;
+
+		byte = dns323_parse_hex_byte(mac_page + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+
+		addr[i] = byte;
+	}
 
 	iounmap(mac_page);
 	printk("DNS-323: Found ethernet MAC address: %pM\n", addr);

arch/arm/mach-orion5x/tsx09-common.c

@@ -53,12 +53,53 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = qnap_tsx09_parse_hex_nibble(b[0]);
+	lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
 static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
 {
 	u_int8_t addr[6];
+	int i;
 
-	if (!mac_pton(addr_str, addr))
-		return -1;
+	for (i = 0; i < 6; i++) {
+		int byte;
+
+		/*
+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+		 */
+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+			return -1;
+
+		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+		if (byte < 0)
+			return -1;
+		addr[i] = byte;
+	}
 
 	printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
 
@@ -77,12 +118,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
 	unsigned long addr;
 
 	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
-		void __iomem *nor_page;
+		char *nor_page;
 		int ret = 0;
 
 		nor_page = ioremap(addr, 1024);
 		if (nor_page != NULL) {
-			ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
+			ret = qnap_tsx09_check_mac_addr(nor_page);
 			iounmap(nor_page);
 		}
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -23,7 +23,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/perf/arm_pmu.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/outercache.h>
@@ -112,37 +111,6 @@ static void ux500_restart(enum reboot_mode mode, const char *cmd)
 	prcmu_system_reset(0);
 }
 
-/*
- * The PMU IRQ lines of two cores are wired together into a single interrupt.
- * Bounce the interrupt to the other core if it's not ours.
- */
-static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
-{
-	irqreturn_t ret = handler(irq, dev);
-	int other = !smp_processor_id();
-
-	if (ret == IRQ_NONE && cpu_online(other))
-		irq_set_affinity(irq, cpumask_of(other));
-
-	/*
-	 * We should be able to get away with the amount of IRQ_NONEs we give,
-	 * while still having the spurious IRQ detection code kick in if the
-	 * interrupt really starts hitting spuriously.
-	 */
-	return ret;
-}
-
-static struct arm_pmu_platdata db8500_pmu_platdata = {
-	.handle_irq		= db8500_pmu_handler,
-	.irq_flags		= IRQF_NOBALANCING | IRQF_NO_THREAD,
-};
-
-static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
-	/* Requires call-back bindings. */
-	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
-	{},
-};
-
 static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
 	{},
@@ -165,9 +133,6 @@ static void __init u8500_init_machine(void)
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,
 				     u8540_auxdata_lookup, NULL);
-	else
-		of_platform_populate(NULL, u8500_local_bus_nodes,
-				     u8500_auxdata_lookup, NULL);
 }
 
 static const char * stericsson_dt_platform_compat[] = {

arch/arm/plat-orion/common.c

@@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
-static __initdata struct mdio_board_info
-		  orion_ge00_switch_board_info;
+static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
+	.bus_id   = "orion-mii",
+	.modalias = "mv88e6085",
+};
 
 void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	struct mdio_board_info *bd;
 	unsigned int i;
 
 	if (!IS_BUILTIN(CONFIG_PHYLIB))
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
-		if (!strcmp(d->port_names[i], "cpu"))
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
+		if (!strcmp(d->port_names[i], "cpu")) {
+			d->netdev[i] = &orion_ge00.dev;
 			break;
+		}
+	}
 
-	bd = &orion_ge00_switch_board_info;
-	bd->bus_id = orion_ge00_mvmdio_bus_name;
-	bd->mdio_addr = d->sw_addr;
-	d->netdev[i] = &orion_ge00.dev;
-	strcpy(bd->modalias, "mv88e6085");
-	bd->platform_data = d;
+	orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
+	orion_ge00_switch_board_info.platform_data = d;
 
 	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -165,14 +165,14 @@ spicc1: spi@15000 {
 
 			uart_A: serial@24000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x24000 0x0 0x14>;
+				reg = <0x0 0x24000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@23000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x23000 0x0 0x14>;
+				reg = <0x0 0x23000 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -235,14 +235,14 @@ reset: reset-controller@4404 {
 
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
+				reg = <0x0 0x84c0 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
+				reg = <0x0 0x84dc 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -287,7 +287,7 @@ pwm_ef: pwm@86c0 {
 
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
+				reg = <0x0 0x8700 0x0 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -404,14 +404,14 @@ sec_AO: ao-secure@140 {
 
 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
+				reg = <0x0 0x004c0 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO_B: serial@4e0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004e0 0x0 0x14>;
+				reg = <0x0 0x004e0 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -631,6 +631,7 @@ internal_mdio: mdio@e40908ff {
 
 			internal_phy: ethernet-phy@8 {
 				compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <8>;
 				max-speed = <100>;
 			};

arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi

@@ -98,7 +98,7 @@ clk125mhz: uart_clk125mhz {
 		clock-output-names = "clk125mhz";
 	};
 
-	pci {
+	pcie@30000000 {
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -118,6 +118,7 @@ pci {
 		ranges =
 		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
 		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		bus-range = <0 0xff>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map =
 		      /* addr  pin  ic   icaddr  icintr */

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -51,7 +51,7 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		ramoops@0x21f00000 {
+		ramoops@21f00000 {
 			compatible = "ramoops";
 			reg = <0x0 0x21f00000 0x0 0x00100000>;
 			record-size	= <0x00020000>;

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -341,7 +341,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@0x10005000 {
+		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -140,16 +140,16 @@ usb2_id: usb2-id {
 		};
 
 		agnoc@0 {
-			qcom,pcie@00600000 {
+			qcom,pcie@600000 {
 				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00608000 {
+			qcom,pcie@608000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00610000 {
+			qcom,pcie@610000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
 			};

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -840,7 +840,7 @@ agnoc@0 {
 			#size-cells = <1>;
 			ranges;
 
-			pcie0: qcom,pcie@00600000 {
+			pcie0: qcom,pcie@600000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				status = "disabled";
 				power-domains = <&gcc PCIE0_GDSC>;
@@ -893,7 +893,7 @@ pcie0: qcom,pcie@00600000 {
 
 			};
 
-			pcie1: qcom,pcie@00608000 {
+			pcie1: qcom,pcie@608000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE1_GDSC>;
 				bus-range = <0x00 0xff>;
@@ -946,7 +946,7 @@ pcie1: qcom,pcie@00608000 {
 						"bus_slave";
 			};
 
-			pcie2: qcom,pcie@00610000 {
+			pcie2: qcom,pcie@610000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE2_GDSC>;
 				bus-range = <0x00 0xff>;

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

@@ -132,17 +132,16 @@ &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 	clock_in_out = "input";
-	/* shows instability at 1GBit right now */
-	max-speed = <100>;
 	phy-supply = <&vcc_io>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x26>;
-	rx_delay = <0x11>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -730,7 +730,7 @@ sdmmc: dwmmc@ff500000 {
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -741,7 +741,7 @@ sdio: dwmmc@ff510000 {
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -752,7 +752,7 @@ emmc: dwmmc@ff520000 {
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -257,7 +257,7 @@ sdio0: dwmmc@ff0d0000 {
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO0>;

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

@@ -457,7 +457,7 @@ &pcie0 {
 	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
 	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
 	assigned-clock-rates = <100000000>;
-	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1739,8 +1739,8 @@ edp: edp@ff970000 {
 		compatible = "rockchip,rk3399-edp";
 		reg = <0x0 0xff970000 0x0 0x8000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "dp", "pclk", "grf";
 		pinctrl-names = "default";
 		pinctrl-0 = <&edp_hpd>;
 		power-domains = <&power RK3399_PD_EDP>;

arch/arm64/include/asm/cputype.h

@@ -20,7 +20,7 @@
 
 #define MPIDR_UP_BITMASK	(0x1 << 30)
 #define MPIDR_MT_BITMASK	(0x1 << 24)
-#define MPIDR_HWID_BITMASK	0xff00ffffffUL
+#define MPIDR_HWID_BITMASK	UL(0xff00ffffff)
 
 #define MPIDR_LEVEL_BITS_SHIFT	3
 #define MPIDR_LEVEL_BITS	(1 << MPIDR_LEVEL_BITS_SHIFT)

arch/arm64/include/asm/stacktrace.h

@@ -28,7 +28,7 @@ struct stackframe {
 	unsigned long fp;
 	unsigned long pc;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	unsigned int graph;
+	int graph;
 #endif
 };
 

arch/arm64/include/asm/uaccess.h

@@ -72,15 +72,15 @@ static inline void set_fs(mm_segment_t fs)
  * This is equivalent to the following test:
  * (u65)addr + (u65)size <= (u65)current->addr_limit + 1
  */
-static inline unsigned long __range_ok(unsigned long addr, unsigned long size)
+static inline unsigned long __range_ok(const void __user *addr, unsigned long size)
 {
-	unsigned long limit = current_thread_info()->addr_limit;
+	unsigned long ret, limit = current_thread_info()->addr_limit;
 
 	__chk_user_ptr(addr);
 	asm volatile(
 	// A + B <= C + 1 for all A,B,C, in four easy steps:
 	// 1: X = A + B; X' = X % 2^64
-	"	adds	%0, %0, %2\n"
+	"	adds	%0, %3, %2\n"
 	// 2: Set C = 0 if X > 2^64, to guarantee X' > C in step 4
 	"	csel	%1, xzr, %1, hi\n"
 	// 3: Set X' = ~0 if X >= 2^64. For X == 2^64, this decrements X'
@@ -92,9 +92,9 @@ static inline unsigned long __range_ok(unsigned long addr, unsigned long size)
 	//    testing X' - C == 0, subject to the previous adjustments.
 	"	sbcs	xzr, %0, %1\n"
 	"	cset	%0, ls\n"
-	: "+r" (addr), "+r" (limit) : "Ir" (size) : "cc");
+	: "=&r" (ret), "+r" (limit) : "Ir" (size), "0" (addr) : "cc");
 
-	return addr;
+	return ret;
 }
 
 /*
@@ -104,7 +104,7 @@ static inline unsigned long __range_ok(unsigned long addr, unsigned long size)
  */
 #define untagged_addr(addr)		sign_extend64(addr, 55)
 
-#define access_ok(type, addr, size)	__range_ok((unsigned long)(addr), size)
+#define access_ok(type, addr, size)	__range_ok(addr, size)
 #define user_addr_max			get_fs
 
 #define _ASM_EXTABLE(from, to)						\

arch/arm64/kernel/armv8_deprecated.c

@@ -370,6 +370,7 @@ static unsigned int __kprobes aarch32_check_condition(u32 opcode, u32 psr)
 static int swp_handler(struct pt_regs *regs, u32 instr)
 {
 	u32 destreg, data, type, address = 0;
+	const void __user *user_ptr;
 	int rn, rt2, res = 0;
 
 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
@@ -401,7 +402,8 @@ static int swp_handler(struct pt_regs *regs, u32 instr)
 		aarch32_insn_extract_reg_num(instr, A32_RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok(VERIFY_WRITE, (address & ~3), 4)) {
+	user_ptr = (const void __user *)(unsigned long)(address & ~3);
+	if (!access_ok(VERIFY_WRITE, user_ptr, 4)) {
 		pr_debug("SWP{B} emulation: access to 0x%08x not allowed!\n",
 			address);
 		goto fault;

arch/arm64/kernel/cpufeature.c

@@ -199,9 +199,11 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
 };
 
 static const struct arm64_ftr_bits ftr_ctr[] = {
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1),	/* RAO */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1),		/* RES1 */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 29, 1, 1),	/* DIC */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 28, 1, 1),	/* IDC */
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0),	/* CWG */
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),	/* ERG */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, 20, 4, 0),	/* ERG */
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1),	/* DminLine */
 	/*
 	 * Linux can handle differing I-cache policies. Userspace JITs will

arch/arm64/kernel/perf_event.c

@@ -908,9 +908,9 @@ static void __armv8pmu_probe_pmu(void *info)
 	int pmuver;
 
 	dfr0 = read_sysreg(id_aa64dfr0_el1);
-	pmuver = cpuid_feature_extract_signed_field(dfr0,
+	pmuver = cpuid_feature_extract_unsigned_field(dfr0,
 			ID_AA64DFR0_PMUVER_SHIFT);
-	if (pmuver < 1)
+	if (pmuver == 0xf || pmuver == 0)
 		return;
 
 	probe->present = true;

arch/arm64/kernel/process.c

@@ -220,8 +220,15 @@ void __show_regs(struct pt_regs *regs)
 
 	show_regs_print_info(KERN_DEFAULT);
 	print_pstate(regs);
-	printk("pc : %pS\n", (void *)regs->pc);
-	printk("lr : %pS\n", (void *)lr);
+
+	if (!user_mode(regs)) {
+		printk("pc : %pS\n", (void *)regs->pc);
+		printk("lr : %pS\n", (void *)lr);
+	} else {
+		printk("pc : %016llx\n", regs->pc);
+		printk("lr : %016llx\n", lr);
+	}
+
 	printk("sp : %016llx\n", sp);
 
 	i = top_reg;

arch/arm64/kernel/ptrace.c

@@ -1419,7 +1419,7 @@ static int compat_ptrace_hbp_get(unsigned int note_type,
 	u64 addr = 0;
 	u32 ctrl = 0;
 
-	int err, idx = compat_ptrace_hbp_num_to_idx(num);;
+	int err, idx = compat_ptrace_hbp_num_to_idx(num);
 
 	if (num & 1) {
 		err = ptrace_hbp_get_addr(note_type, tsk, idx, &addr);

arch/arm64/kernel/stacktrace.c

@@ -59,6 +59,11 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (tsk->ret_stack &&
 			(frame->pc == (unsigned long)return_to_handler)) {
+		if (WARN_ON_ONCE(frame->graph == -1))
+			return -EINVAL;
+		if (frame->graph < -1)
+			frame->graph += FTRACE_NOTRACE_DEPTH;
+
 		/*
 		 * This is a case where function graph tracer has
 		 * modified a return address (LR) in a stack frame

arch/arm64/kernel/sys_compat.c

@@ -57,7 +57,7 @@ do_compat_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(VERIFY_READ, start, end - start))
+	if (!access_ok(VERIFY_READ, (const void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_compat_cache_op(start, end);

arch/arm64/kernel/time.c

@@ -52,7 +52,7 @@ unsigned long profile_pc(struct pt_regs *regs)
 	frame.fp = regs->regs[29];
 	frame.pc = regs->pc;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	frame.graph = -1; /* no task info */
+	frame.graph = current->curr_ret_stack;
 #endif
 	do {
 		int ret = unwind_frame(NULL, &frame);

arch/arm64/kernel/traps.c

@@ -57,7 +57,7 @@ static const char *handler[]= {
 	"Error"
 };
 
-int show_unhandled_signals = 1;
+int show_unhandled_signals = 0;
 
 static void dump_backtrace_entry(unsigned long where)
 {
@@ -526,14 +526,6 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
 	}
 #endif
 
-	if (show_unhandled_signals_ratelimited()) {
-		pr_info("%s[%d]: syscall %d\n", current->comm,
-			task_pid_nr(current), regs->syscallno);
-		dump_instr("", regs);
-		if (user_mode(regs))
-			__show_regs(regs);
-	}
-
 	return sys_ni_syscall();
 }