Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BPF feature test as well as libbpf is missing the __NR_bpf
define for s390 and currently refuses to compile (selftest suite
depends on libbpf as well). Similar issue was fixed some time
ago via b0c47807d3 ("bpf: Add sparc support to tools and
samples."), just do the same and add definitions.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
And provide an alternative implementation to keep perf building on older
distros as we're about to add initial support for namespaces.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bqdwijunhjlvps1ardykhw1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) Track alignment in BPF verifier so that legitimate programs won't be
rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
2) Make tail calls work properly in arm64 BPF JIT, from Deniel
Borkmann.
3) Make the configuration and semantics Generic XDP make more sense and
don't allow both generic XDP and a driver specific instance to be
active at the same time. Also from Daniel.
4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.
5) Fix use-after-free in VRF driver, from Gao Feng.
6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
qca_spi driver, from Stefan Wahren.
7) Always run cleanup routines in BPF samples when we get SIGTERM, from
Andy Gospodarek.
8) The mdio phy code should bring PHYs out of reset using the shared
GPIO lines before invoking bus->reset(). From Florian Fainelli.
9) Some USB descriptor access endian fixes in various drivers from
Johan Hovold.
10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
Pressman.
11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.
12) Cure netdev leak in AF_PACKET when using timestamping via control
messages. From Douglas Caetano dos Santos.
13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
Lichvar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
ldmvsw: stop the clean timer at beginning of remove
ldmvsw: unregistering netdev before disable hardware
net: netcp: fix check of requested timestamping filter
ipv6: avoid dad-failures for addresses with NODAD
qed: Fix uninitialized data in aRFS infrastructure
mdio: mux: fix device_node_continue.cocci warnings
net/packet: fix missing net_device reference release
net/mlx4_core: Use min3 to select number of MSI-X vectors
macvlan: Fix performance issues with vlan tagged packets
net: stmmac: use correct pointer when printing normal descriptor ring
net/mlx5: Use underlay QPN from the root name space
net/mlx5e: IPoIB, Only support regular RQ for now
net/mlx5e: Fix setup TC ndo
net/mlx5e: Fix ethtool pause support and advertise reporting
net/mlx5e: Use the correct pause values for ethtool advertising
vmxnet3: ensure that adapter is in proper state during force_close
sfc: revert changes to NIC revision numbers
net: ch9200: add missing USB-descriptor endianness conversions
net: irda: irda-usb: fix firmware name on big-endian hosts
net: dsa: mv88e6xxx: add default case to switch
...
Pull perf updates/fixes from Ingo Molnar:
"Mostly tooling updates, but also two kernel fixes: a call chain
handling robustness fix and an x86 PMU driver event definition fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/callchain: Force USER_DS when invoking perf_callchain_user()
tools build: Fixup sched_getcpu feature test
perf tests kmod-path: Don't fail if compressed modules aren't supported
perf annotate: Fix AArch64 comment char
perf tools: Fix spelling mistakes
perf/x86: Fix Broadwell-EP DRAM RAPL events
perf config: Refactor a duplicated code for obtaining config file name
perf symbols: Allow user probes on versioned symbols
perf symbols: Accept symbols starting at address 0
tools lib string: Adopt prefixcmp() from perf and subcmd
perf units: Move parse_tag_value() to units.[ch]
perf ui gtk: Move gtk .so name to the only place where it is used
perf tools: Move HAS_BOOL define to where perl headers are used
perf memswap: Split the byteswap memory range wrappers from util.[ch]
perf tools: Move event prototypes from util.h to event.h
perf buildid: Move prototypes from util.h to build-id.h
Add a new field, "prog_flags", and an initial flag value
BPF_F_STRICT_ALIGNMENT.
When set, the verifier will enforce strict pointer alignment
regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS.
The verifier, in this mode, will also use a fixed value of "2" in
place of NET_IP_ALIGN.
This facilitates test cases that will exercise and validate this part
of the verifier even when run on architectures where alignment doesn't
matter.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
We have tools/build/feature/test-all.c to speed up feature testing,
doing all tests at once, but then all tests in this file should normally
pass.
That is not the case with the sched-getcpu one, that wasn't passing when
included from test-all.c because it needs to have _GNU_SOURCE defined
before including sched.h, but _GNU_SOURCE is defined by a header
included from another feature test included earlier in test-all.d,
test-libpython.c, resulting in:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:121:0:
test-sched_getcpu.c:1:0: error: "_GNU_SOURCE" redefined [-Werror]
#define _GNU_SOURCE
In file included from /usr/include/python2.7/pyconfig.h:6:0,
from /usr/include/python2.7/Python.h:8,
from test-libpython.c:1,
from test-all.c:13:
/usr/include/python2.7/pyconfig-64.h:1177:0: note: this is the location of the previous definition
#define _GNU_SOURCE 1
cc1: all warnings being treated as errors
Which would trigger testing the tests individually, when that
_GNU_SOURCE redefinition would not take place, and the whole process
would continue, just slower... Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 120010cb1e ("tools build: Add test for sched_getcpu()")
Link: http://lkml.kernel.org/n/tip-3qp1it69xsc4w8gnuu1e9ayh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
This change is a follow up of https://lkml.org/lkml/2017/2/2/16
The patch above avoided redefining CC, CXX and PKG_CONFIG in feature
detection. The patch was not merged due to a unsolved concern with the
-MD flag.
Later, commit c8c188679c ("tools build: Use the same CC for feature
detection and actual build") did the change for CC and CXX but not
PKG_CONFIG.
This patch makes PKG_CONFIG consistent with CC and CXX and moves the -MD
to CFLAGS, as suggested by Jiri in the thread above.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
( This is a rebased version of https://lkml.org/lkml/2017/2/7/662 )
Python's CC and link Makefile variables were not passed to feature
detection, causing feature detection to use system's Python rather than
PYTHON_CONFIG's one. This created a mismatch between the detected Python
support and the one actually used by perf when PYTHON_CONFIG is
specified.
Fix it by moving Python's variable initialization to before feature
detection and pass FLAGS_PYTHON_EMBED to Python's feature detection's
build target.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-2-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build with: 'make CC=clang' we were not using that CC to do
feature detection, which resulted in features being detected with gcc
and then the actual tools being built with clang.
Most of the time these compilers are compatible enough, so no
problem was being noticed.
As soon as a system with an old enough clang, one that hasn't
the cpuid.h header is used, and a gcc with it, the "get_cpuid" feature
will be found available but then code that will use can't be compiled.
Noticed with this combination:
/ $ gcc --version | head -1
gcc (Alpine 6.3.0) 6.3.0
/ $ clang --version | head -1
clang version 3.8.1 (tags/RELEASE_381/final)
/ $ cat /etc/alpine-release
3.5.0
/ $
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-60q18nvlvgpyfv7e2qqgx4ou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of trying to go on adding more ifdef conditions, do a feature
test and define HAVE_SCHED_GETCPU_SUPPORT instead, then use it to
provide the prototype. No need to change the stub, as it is already a
__weak symbol.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yge89er9g90sc0v6k0a0r5tr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cancel builtin llvm and clang support when LLVM version is less than
3.9.0: following commits uses newer API.
Since Clang/LLVM's API is not guaranteed to be stable, add a
test-llvm-version.cpp feature checker, issue warning if LLVM found in
compiling environment is not tested yet.
Committer Notes:
Testing it:
Environment:
$ cat /etc/fedora-release
Fedora release 25 (Twenty Five)
$ rpm -q llvm-devel clang-devel
llvm-devel-3.8.0-1.fc25.x86_64
clang-devel-3.8.0-2.fc25.x86_64
$
Before:
$ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel
INSTALL GTK UI
LINK /tmp/build/perf/perf
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)'
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)'
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)'
<SNIP>
After:
Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0)
Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot
to git pull, duh) combo, all works as expected, it is properly detected
and built into the resulting perf binary.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com
[ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've been hit several times by a Makefile bug where line indented by
tab was falsely considered as target command.
We prevent this by always using space indentation for everything except
for the target commands.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if basic clang compiling environment is ready.
Doesn't like 'llvm-config --libs' which can returns llvm libraries in right
order and duplicates some libraries if necessary, there's no correspondence for
clang libraries (-lclangxxx). to avoid extra complexity and to avoid new clang
breaking libraries ordering, use --start-group and --end-group.
In this test case, manually identify required clang libs and hope it to be
stable. Putting all clang libraries here is possible (use make's wildcard), but
then feature checking becomes very slow.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-9-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if basic LLVM compiling environment is ready.
Use llvm-config to detect include and library directories. Avoid using
'llvm-config --cxxflags' because its result contain some unwanted flags
like --sysroot (if LLVM is built by yocto).
Use '?=' to set LLVM_CONFIG, so explicitly passing LLVM_CONFIG to make
would override it.
Use 'llvm-config --libs BPF' to check if BPF backend is compiled in.
Since now BPF bytecode is the only required backend, no need to waste
time linking llvm and clang if BPF backend is missing. This also
introduce an implicit requirement that LLVM should be new enough. Old
LLVM doesn't support BPF backend.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-8-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to detect jvmti support. It is not plugged into the
FEATURE_TESTS machinery, because it's quite rare and will be used
separately from perf via feature_check call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if g++ is available. The result will be used by builtin clang and
LLVM support. Since LLVM requires C++11, this feature detector checks
std::move().
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1474874832-134786-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This checks whether sys/sdt.h is available or not, which is required for
DTRACE_PROBE().
We can disable this feature by passing NO_SDT=1 when building.
This flag will be used for SDT test case and further SDT events in
perftools.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831795615.17065.17513820540591053933.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is not present on some libelf implementations, such as the one used
in Alpine Linux: libelf-0.8.13.
This ends up disabling the SDT code, that relies on this function.
One alternative would be to provide an weak fallback implementation or
the open coded variant used by the buildid sysfs notes reading code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-82lh22ybedy9b9lych8xj12g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That appeared after 0.140, and will be used in the SDT code, so, to
avoid bisection break on older systems, add a feature detection and
provide a stub with a pr_debug() to keep it building.
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-80y0eldgweorqnwha9rvfxjr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Debug-frame for remote platforms is not related to the host platform, so
we should test each platform separately.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1462866037-30382-5-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently only test for local libunwind. We should check all supported
platforms so we can use them to parse perf.data with callchain info on
different machines.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1462866037-30382-4-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Coverity flagged this under CID 1354884 as a sizeof mismatch, it turns
out that the argument "attr" passed to syscall should have been a
pointer to attr in the first place.
Reported-by: coverity (CID 1354884)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 8f9e05fb29 ("perf tools: Fix PowerPC native building")
Link: http://lkml.kernel.org/r/1461551694-5512-3-git-send-email-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Assigning "attr" to "attr" does not have any effect, but was caught by
Coverity, so let's remove this.
Reported-by: coverity (CID 1354720)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/r/1461551694-5512-2-git-send-email-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If not, tell the user that:
config/Makefile:273: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157
And return -ENOTSUPP in die_get_var_range(), failing features that
need it, like the one pointed out above.
This fixes the build on older systems, such as Ubuntu 12.04.5.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9l7luqkq4gfnx7vrklkq4obs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to generate build-ids in the jitdump code.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ tools/perf/Makefile.perf comment about NO_LIBCRYPTO and added it to tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An i386 binary can be linked correctly even without correct headers.
Which causes problem. For exmaple:
$ mv /tmp/oxygen_root/usr/include/gnu/stubs-32.h{,.bak}
$ make tools/perf
Auto-detecting system features:
... dwarf: [ on ]
[SNIP]
GEN common-cmds.h
CC perf-read-vdso32
In file included from /tmp/oxygen_root/usr/include/features.h:388:0,
from /tmp/oxygen_root/usr/include/stdio.h:27,
from perf-read-vdso.c:1:
/tmp/oxygen_root/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory
# include <gnu/stubs-32.h>
^
compilation terminated.
...
In this patch we checks not only compiler and linker, but also basic
headers in test-compile test case, make it fail on a platform
lacking correct headers.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1453893742-20603-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test-all.c file doesn't check BPF related features. For an
environment with all other features enabled, BPF would be considered
enabled without doing real feature check.
This patch adds test-bpf.c into test-all.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.
Reported-and-Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building perf binaries outside the source tree with 'make O=<dir>',
the auto-detected features get re-tested for every build, which is
unnecessary and inconsistent with the behavior seen when building
directly in the source tree.
Another issue is that 'make O=<dir> clean' doesn't remove the feature
files from the object tree.
Fix these problems by looking for the binaries in the $(OUTPUT)
directory.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/113bd01530e9761778c60a75a96c65fc59860f68.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Any CFLAGS or LDFLAGS set by the user need to be passed to the feature
build command. This many include for example -I or -L to point to
libraries and include files in custom paths.
In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD
macro which always sends in CFLAGS and LDFLAGS. The libiberty build line
however doesn't use the BUILD macro and thus needs to send in CFLAGS and
LDFLAGS explicitly. Without this, when using custom CFLAGS/LDFLAGS, libiberty
fails to be detected and the perf link fails with something like:
LINK perf
libbfd.a(bfd.o): In function `bfd_errmsg':
bfd.c:(.text+0x168): undefined reference to `xstrerror'
bbfd.a(opncls.o): In function `_bfd_new_bfd':
opncls.c:(.text+0xe8): undefined reference to `objalloc_create'
...
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The auxtrace code needed by Intel PT uses the __get_cpuid() gcc builtin,
that is not present in old systems, breaking the build.
Add a test to check for that builtin and disable AUXTRACE in those
systems.
[acme@rhel5 linux]$ make NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
<SNIP>
... lzma: [ on ]
... get_cpuid: [ OFF ]
<SNIP>
config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc
MKDIR /tmp/build/perf/util/
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing numa test checks only if numa.h and numa_available() are
present, but that can be satisfied with an old libnuma that is not
enough for the 'perf bench numa' entry, so add a test to check for that:
[acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ on ]
<SNIP>
config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8
INSTALL binaries
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Fedora 22 version of libdw requires a couple of extra libraries to
link. With a dynamic link the dependencies are pulled in automatically,
but this doesn't work for static linking. Add the needed libraries
explicitely to the feature probe and the Makefile.
v2: Explicitly check for static linking and only add the dependencies
when -static is set. This is to avoid regressions on Arnaldo's system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the first patch of libbpf. The goal of libbpf is to create a
standard way for accessing eBPF object files. This patch creates
'Makefile' and 'Build' for it, allows 'make' to build libbpf.a and
libbpf.so, 'make install' to put them into proper directories.
Most part of Makefile is borrowed from traceevent.
Before building, it checks the existence of libelf in Makefile, and deny
to build if not found. Instead of throwing an error if libelf not found,
the error raises in a phony target "elfdep". This design is to ensure
'make clean' still workable even if libelf is not found.
Because libbpf requires 'kern_version' field set for 'union bpf_attr'
(bpfdep" is used for that dependency), Kernel BPF API is also checked
by intruducing a new feature check 'bpf' into tools/build/feature,
which checks the existence and version of linux/bpf.h. When building
libbpf, it searches that file from include/uapi/linux in kernel source
tree (controlled by FEATURE_CHECK_CFLAGS-bpf). Since it searches kernel
source tree it reside, installing of newest kernel headers is not
required, except we are trying to port these files to an old kernel.
To avoid checking that file when perf building, the newly introduced
'bpf' feature check doesn't added into FEATURE_TESTS and
FEATURE_DISPLAY by default in tools/build/Makefile.feature, but added
into libbpf's specific.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Bcc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to decompress 'xz' objects. The check detects
the liblzma.so devel library normally delivered by xz package.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Moving feature checks code under tools/build directory.
Changing also $feature_dir to point to new feature directory location
and perf Makefiles to include Makefile.feature from new location.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-3lamtb30dhf4wo99y1n8kxg0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Greg Kroah-Hartman