Introduce CONFIG_SUSPEND representing the ability to enter system sleep
states, such as the ACPI S3 state, and allow the user to choose SUSPEND
and HIBERNATION independently of each other.
Make HOTPLUG_CPU be selected automatically if SUSPEND or HIBERNATION has
been chosen and the kernel is intended for SMP systems.
Also, introduce CONFIG_PM_SLEEP which is automatically selected if
CONFIG_SUSPEND or CONFIG_HIBERNATION is set and use it to select the
code needed for both suspend and hibernation.
The top-level power management headers and the ACPI code related to
suspend and hibernation are modified to use the new definitions (the
changes in drivers/acpi/sleep/main.c are, mostly, moving code to reduce
the number of ifdefs).
There are many other files in which CONFIG_PM can be replaced with
CONFIG_PM_SLEEP or even with CONFIG_SUSPEND, but they can be updated in
the future.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As it was a synonym for (CONFIG_ACPI && CONFIG_X86),
the ifdefs for it were more clutter than they were worth.
For ia64, just add a few stubs in anticipation of future
S3 or S4 support.
Signed-off-by: Len Brown <len.brown@intel.com>
Define standardized HIDs - Rename current acpi_device_id to acpica_device_id
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Based on the David Brownell's patch at
http://marc.info/?l=linux-acpi&m=117873972806360&w=2
updated by: Rafael J. Wysocki <rjw@sisk.pl>
Add a helper routine returning the lowest power (highest number) ACPI device
power state that given device can be in while the system is in the sleep state
indicated by acpi_target_sleep_state .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
Split ACPI_DEBUG into function trace enabled and not enabled.
Function trace is most of the ACPI_DEBUG costs, but is
not much of use for kernel ACPI debugging.
Size of kernel image increased on test compile:
+ 48k (Full ACPI_DEBUG)
+ 35k (ACPI_DEBUG with function trace compiled out)
Performance without function trace is also much better.
Also remove ACPI_LV_DEBUG_OBJECT from default debug level as
a lot vendors let Store (value, debug) in their code and this
might confuse users when it pops up in syslog.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPI has a ton of macros which make a bunch of empty if's when configured
in non-debug mode.
[lenb: The code it complaines about is functionally correct,
so this patch is just to make -Wextra happier]
#define DBG()
if(...)
DBG();
next_c_statement
which turns into
if(...) ;
next_c_statement
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
For NUMA emulation, our SLIT should represent the true NUMA topology of the
system but our proximity domain to node ID mapping needs to reflect the
emulated state.
When NUMA emulation has successfully setup fake nodes on the system, a new
function, acpi_fake_nodes() is called. This function determines the proximity
domain (_PXM) for each true node found on the system. It then finds which
emulated nodes have been allocated on this true node as determined by its
starting address. The node ID to PXM mapping is changed so that each fake
node ID points to the PXM of the true node that it is located on.
If the machine failed to register a SLIT, then we assume there is no special
requirement for emulated node affinity so we use the default LOCAL_DISTANCE,
which is newly exported to this code, as our measurement if the emulated nodes
appear in the same PXM. Otherwise, we use REMOTE_DISTANCE.
PXM_INVAL and NID_INVAL are also exported to the ACPI header file so that we
can compare node_to_pxm() results in generic code (in this case, the SRAT
code).
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Upon ACPI events, send an "acpi_event" via Generic Netlink.
This is in addition to /proc/acpi/event, which remains intact for now.
Thanks to Jamal for his great help.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented support to allow Package objects to be passed as
method arguments to the acpi_evaluate_object interface. Previously,
this would return an AE_NOT_IMPLEMENTED exception.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Last of the "Section mismatch" errors from ia64 builds! acpi_map_pxm_to_node()
is defined with attribute __cpuinit, but is called by "normal" kernel functions
acpi_getnode() and acpi_map_cpu2node().
Commit f363d16fbb moved the data structures on
which this routine operates from __cpuinitdata to regular memory, so this
routine can also move out of init space.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add __init to:
acpi_initialize_subsystem() (and un-export it)
acpi_os_initialize()
Add __initdata to:
acpi_osl_dmi_table[]
Signed-off-by: Len Brown <len.brown@intel.com>
The boot option "acpi_osi=" has always disabled Linux _OSI support,
thus disabling all OS Interface strings which are advertised
by Linux to the BIOS.
Now...
acpi_osi="string" adds the interface string, and
acpi_osi="!string" invalidates the pre-defined interface string
eg. acpi_osi="!Windows 2006"
would disable Linux's claim of Vista compatibility.
Signed-off-by: Len Brown <len.brown@intel.com>
Strip __cpuinit[data] from Node <-> PXM routines and supporting data
structures. Also make pxm_to_node_map and node_to_pxm_map local to the
numa acpi module.
This fixes a bug triggered by the following conditions:
- boot on a machine with a SLIT table defined
- kernel is configured w/ CONFIG_HOTPLUG_CPU=n
- cat /sys/devices/system/node/node*/distance
This will cause an oops by calling into a freed memory section.
In particular, on x86_64, __node_distance calls node_to_pxm().
Signed-off-by: Aaron Durbin <adurbin@google.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c0d127b569.
These changes to AML locking were made to allow
Notify handlers to be called on the stack
and not deadlock. However, that scheme turns
out to be flawed and was reverted by the previous commit,
so this commit restores the locking to it previous design.
Signed-off-by: Len Brown <len.brown@intel.com>
This reverts commit a8f4af6dc6.
Thus restoring ACPICA's new acpi_serialize code.
This commit by itself may cause a regression, but
it is reverted in this order so that subsequent
reverts reverts under this one can be made
without conflict.
Signed-off-by: Len Brown <len.brown@intel.com>
Teach PNPACPI how to hook up its devices to their ACPI nodes, so that
pnpdev->dev.archdata points to the parallel acpi device node. Previously
this only worked for PCI, leaving a notable hole.
Export "acpi_bus_type" so this can work.
Remove some extraneous whitespace.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes. The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.
Thanks to Kay for fixing the bugs in this patch.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ACPI spec defines the bit and Microsoft uses it,
so Linux must use it too.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_integer is 64-bits on all platforms, and so was defined as a u64.
i386 and x86_64 define u64 as unsigned long long.
ia64 defines u64 as long.
While these are all 64-bits, the kernel build warns about formating
a "long" with %ll:
drivers/ata/libata-acpi.c:176: warning: long long unsigned int format, acpi_integer arg (arg 5)
So skip using "u64" and define acpi_integer as "unsigned long long"
to make gcc happy with %ll.
Signed-off-by: Len Brown <len.brown@intel.com>
This is a preperatory patch for highres/dyntick:
- replace the big #ifdef ARCH_APICTIMER_STOPS_ON_C3 hackery by functions
- remove the double switch in the power verify function (in the worst case
we switched ipi to apic and 20usec later apic to ipi)
- keep track of the the state which stops local APIC timer
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <len.brown@intel.com>
Cc: <linux-acpi@vger.kernel.org>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ACPI AML supports "serialized" methods which are protected
by an implicit mutex. The mutex is re-entrant for that AML thread
to allow recursion.
However, Linux implements notify() by creating a new AML thread.
So for systems where notify() re-enters a serialized method,
deadlock results.
The fix is to use the Linux thread_id as the key to allowing
re-entrancy, not the AML thread pointer.
http://bugzilla.kernel.org/show_bug.cgi?id=5534
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
late_initcall() is too late for acpi_sleep_init().
Call it directly from acpi_init code.
http://bugzilla.kernel.org/show_bug.cgi?id=7887
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Vladimir Lebedev <vladimir.p.lebedev@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
drivers/acpi/bay.c: In function 'bay_add':
drivers/acpi/bay.c:310: warning: statement with no effect
Fix it by rewriting those macros in C. Much nicer.
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Added 2007 copyright to all module headers and signons. This affects
virtually every file in the ACPICA core subsystem, iASL compiler,
and the utilities.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Allow processor to be declered with the Device(), such as:
Device(CPU1234) {
Name(_HID, "ACPI007")
Name(_UID, 1234)
}
Signed-off-by: Len Brown <len.brown@intel.com>
Debugger: Enhanced the Statistics/Memory command to emit the
total (maximum) memory used during execution, as well as the
maximum memory consumed by each of the various object types.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented enhancements to the multithreading support within
the debugger to enable better multithreading evaluation of the subsystem.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Support for 16-bit ACPICA has been completely removed since it is
no longer necessary and it clutters the code. All 16-bit macros,
types, and conditional compiles have been removed, cleaning up
and simplifying the code across the entire subsystem.
DOS support is no longer needed since the Linux firmware kit
is now available.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
AcpiEnable will now fail if all of the required ACPI tables are not
loaded (FADT, FACS, DSDT). BZ 477
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Thus, even if the default compiler setting is non-aligned, the header is compiled
correctly.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Optimized the Load operator in the case where the source operand is an
operation region. Simply map the operation region memory, instead of
performing a bytewise read.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fixed a problem with a possible race condition between threads executing
AcpiWalkNamespace and the AML interpreter. This condition was removed by
modifying AcpiWalkNamespace to (by default) ignore all temporary
namespace entries created during any concurrent control method execution
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Restructured the AML ParseLoop function, breaking it into several
subfunctions in order to reduce CPU stack use and improve maintainability
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Remove flags parameter for acpi_{get,set}_register().
It is no longer necessary now that these functions use a
spinlock for mutual exclusion.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
to differentiate the failure modes.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Required new table init interface since iASL does not use RSDP/XSDT.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Moved all FADT-related functions to a new file, tbfadt.c.
Eliminated the acpi_hw_initialize function - the
FADT registers are now validated when the table is loaded.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Enhanced the implementation of the interpreters'
serialized mode (boot with "acpi_serialize" to set
acpi_glb_all_methods_serialized flag.)
When this mode is specified, instead of creating a serialization
semaphore per control method, the interpreter lock is
simply no longer released before a blocking operation
during control method execution. This effectively makes
the AML Interpreter single-threaded. The overhead of a
semaphore per-method is eliminated.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Split acpi_format_exception into two parts. New
function is acpi_ut_verify_exception and will be used to
verify exception codes returned by user.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Update internal GPE data structure to simplify
debug, use gpe_number instead of register bitmask.
Signed-off-by: Bob Moore <bob.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Update interface to acpi_ut_repair_name() to avoid
alignment issues on IA64
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Change for GPE support: when a wake GPE is
received, now all wake GPEs are immediately disabled to
prevent the waking GPE from firing again, and to prevent
other wake GPEs from interrupting the wake process.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implement support for ACPI DMAR table (DMA
Remapping Table) in header files and disassembler.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The Table Manager component has been completely
redesigned and reimplemented. The new design is much
simpler, and reduces the overall code and data size of
the kernel-resident ACPICA by approximately 5%. Also,
it is now possible to obtain the ACPI tables very early
during kernel initialization, even before dynamic memory
management is initialized.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Completed a new design and implementation for
the ACPI Global Lock support. On the OS side, the global
lock is now treated as a standard AML mutex. Previously,
multiple OS threads could acquire the global lock
simultaneously, but this could cause the BIOS to be starved
by the lock in cases such as the Embedded Controller driver,
where there is a tight coupling between the OS and the BIOS.
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the ACPI devices use the internal fake hids
which are exposed to userspace as devces' bus_id after sysfs conversion.
To make it more friendly, we convert them to more understandable strings.
For those devices w/o PNPids, we use "device:instance_no" as the bus_id
instead of "PNPIDNON:instance_no".
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We have some new larger ia64 systems in HP that trip over the
ACPI_MAX_REFERENCE_COUNT limit which triggers a large number of these
debug messages:
ACPI Warning (utdelete-0397): Large Reference Count (XXX) in object e0000a0ff6797ab0 [20060707]
This was increased once in the past as described in this very brief thread:
http://www.mail-archive.com/linux-acpi@vger.kernel.org/msg00890.html
Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
http://bugzilla.kernel.org/show_bug.cgi?id=7695
Originally we converted bind/unbind to use a new pci bridge driver.
The driver will add/remove _PRT, so we can eventually remove
.bind/.unbind methods.
But we found that some of the _ADR-Based devices don't have _PRT,
i.e. they are not managed by the new ACPI PCI bridge driver.
So that .bind method is not called for some _ADR-Based devices,
which leads to a failure.
Now we make ACPI PCI Root Bridge Driver scan and binds all _ADR-Based devices
once the driver is loaded, in the .add method of ACPI PCI Root Bridge driver.
Extra code path for calling .bind/.unbind when _ADR-Based devices
are hot added/removed is also added.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Make acpi_load_table() available for use by removing it from the #ifdef
ACPI_FUTURE_USAGE.
Also add a new routine used to unload an ACPI table of a given type and "id" -
acpi_unload_table_id(). The implementation of this new routine was almost a
direct copy of existing routine acpi_unload_table() - only difference being
that it only removes a specific table id instead of ALL tables of a given
type. The SN hotplug driver (sgi_hotplug.c) now uses both of these interfaces
to dynamically load and unload SSDT ACPI tables.
Also, a few other ACPI routines now used by the SN hotplug driver are exported
(since the driver can be a loadable module):
acpi_ns_map_handle_to_node
acpi_ns_convert_entry_to_handle
acpi_ns_get_next_node
Signed-off-by: Aaron Young <ayoung@sgi.com>
Cc: Greg KH <greg@kroah.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
We do this mainly because:
1. hid is used to match ACPI devices and drivers.
.match method which is incompatible to driver model
can be deleted from acpi_driver.ops then.
2. As the .uevent method mark ACPI drivers by PNPID,
fake hid is set to non-PNPID devices so that udev script
can load the right ACPI driver by looking for
"HWID = " or "COMPTID = ".
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add removal_type in structure acpi_device for hot removal.
ACPI_BUS_REMOVAL_EJECT is used for ACPI device hot removal.
Only one parameter is allowed in .remove method due to driver model.
So removal_type is added to indicate different removal type.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add acpi_bus_ops in acpi_device to support acpi hot plug.
NOTE: Two methods .add and .start in acpi_driver.ops are
called separately to probe ACPI devices, while only
.probe method is called in driver model.
As executing .add and .start separately is critical
for ACPI device hot plug, we use acpi_bus_ops to
distinguish different code path.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Setup new sysfs framework
1. Remove /sys/firmware/acpi
2. Add ACPI device in device tree.
File "eject" for every device that has _EJ0 method is moved from
/sys/firmware to /sys/devices.
Operation on this file is exactly the same as before.
i.e. echo 1 to "eject" will cause hot removal of this device.
Corresponding changes should be made in userspace for hot removal.
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Zhang Rui<rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPI device/driver registration Interfaces are modified
to follow Linux driver model.
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add ACPI bus_type for Linux driver model.
1. .shutdown method is added into acpi_driver.ops
needed by bus_type operations.
2. remove useless parameter 'int state' in .resume method.
3. change parameter 'int state'
to 'pm_message_t state' in .suspend method.
Note: The new .uevent method mark ACPI drivers by PNPID instead of by name.
Udev script needs to look for "HWID=" or "COMPTID=" to load
ACPI drivers as a result.
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add device_driver into acpi_driver for driver model.
Add helper functions 'to_acpi_device' and 'to_acpi_driver'
to get structure acpi_device/acpi_driver by device/device_driver.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change ACPI to use dev_archdata instead of firmware_data
This patch changes ACPI to use the new dev_archdata on i386, x86_64
and ia64 (is there any other arch using ACPI ?) to store it's
acpi_handle.
It also removes the firmware_data field from struct device as this
was the only user.
Only build-tested on x86
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Intel processors starting with the Core Duo support
support processor native C-state using the MWAIT instruction.
Refer: Intel Architecture Software Developer's Manual
http://www.intel.com/design/Pentium4/manuals/253668.htm
Platform firmware exports the support for Native C-state to OS using
ACPI _PDC and _CST methods.
Refer: Intel Processor Vendor-Specific ACPI: Interface Specification
http://www.intel.com/technology/iapc/acpi/downloads/302223.htm
With Processor Native C-state, we use 'MWAIT' instruction on the processor
to enter different C-states (C1, C2, C3). We won't use the special IO
ports to enter C-state and no SMM mode etc required to enter C-state.
Overall this will mean better C-state support.
One major advantage of using MWAIT for all C-states is, with this and
"treat interrupt as break event" feature of MWAIT, we can now get accurate
timing for the time spent in C1, C2, .. states.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
This is needed by at least the Mac Mini's, which (incorrectly) come back
from suspend with SCI_EN clear.
Thanks to Frdric Riss for hunting this down.
Acked-by: Frdric Riss <frederic.riss@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace acpi_in_resume with a more general hack
to check irqs_disabled() on any kmalloc() from ACPI.
While setting (system_state != SYSTEM_RUNNING) on resume
seemed more general, Andrew Morton preferred this approach.
http://bugzilla.kernel.org/show_bug.cgi?id=3469
Make acpi_os_allocate() into an inline function to
allow /proc/slab_allocators to work.
Delete some memset() that could fault on allocation failure.
Signed-off-by: Len Brown <len.brown@intel.com>
Linux mutexes and the debug code that that reference
acpi_os_get_thread_id() are happy with 0.
But the AML mutexes in exmutex.c expect a unique non-zero
number for each thread - as they track this thread_id
to permit the mutex re-entrancy defined by the ACPI spec.
http://bugzilla.kernel.org/show_bug.cgi?id=6687
Signed-off-by: Len Brown <len.brown@intel.com>
Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to
support C compilers that do not allow the initialization
of address pointers within packed structures - even though
the hardware itself may support misaligned transfers. Some
of the debug data structures are packed by default to
minimize size.
Added an error message for the case where
acpi_os_get_thread_id() returns zero. A non-zero value is
required by the core ACPICA code to ensure the proper
operation of AML mutexes and recursive control methods.
The DSDT is now the only ACPI table that determines whether
the AML interpreter is in 32-bit or 64-bit mode. Not really
a functional change, but the hooks for per-table 32/64
switching have been removed from the code. A clarification
to the ACPI specification is forthcoming in ACPI 3.0B.
Fixed a possible leak of an Owner ID in the error
path of tbinstal.c acpi_tb_init_table_descriptor() and
migrated all table OwnerID deletion to a single place in
acpi_tb_uninstall_table() to correct possible leaks when using
the acpi_tb_delete_tables_by_type() interface (with assistance
from Lance Ortiz.)
Fixed a problem with Serialized control methods where the
semaphore associated with the method could be over-signaled
after multiple method invocations.
Fixed two issues with the locking of the internal
namespace data structure. Both the Unload() operator and
acpi_unload_table() interface now lock the namespace during
the namespace deletion associated with the table unload
(with assistance from Linn Crosetto.)
Fixed problem reports (Valery Podrezov) integrated: -
Eliminate unnecessary memory allocation for CreateXxxxField
http://bugzilla.kernel.org/show_bug.cgi?id=5426
Fixed problem reports (Fiodor Suietov) integrated: -
Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369)
- On Address Space handler deletion, needless deactivation
call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate
Device handle parameter (BZ 375) - Possible memory leak,
Notify sub-objects of Processor, Power, ThermalZone (BZ
376) - AcpiRemoveAddressSpaceHandler: validate Handler
parameter (BZ 378) - Minimum Length of RSDT should be
validated (BZ 379) - AcpiRemoveNotifyHandler: return
AE_NOT_EXIST if Processor Obj has no Handler (BZ (380)
- AcpiUnloadTable: return AE_NOT_EXIST if no table of
specified type loaded (BZ 381)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This reverts commit a5e1b94008.
Adrian Bunk points out that it has build errors, and apparently no
maintenance. Throw it out.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Track the actual time spent in C-States (C2 upwards, we can't determine this
for C1), not only the number of invocations. This is especially useful for
dynamic ticks / "tickless systems", but is also of interest on normal systems,
as any interrupt activity leads to C-States being exited, not only the timer
interrupt.
The time is being measured in PM timer ticks, so an increase by one equals 279
nanoseconds.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented a new acpi_spinlock type for the OSL lock
interfaces. This allows the type to be customized to
the host OS for improved efficiency (since a spinlock is
usually a very small object.)
Implemented support for "ignored" bits in the ACPI
registers. According to the ACPI specification, these
bits should be preserved when writing the registers via
a read/modify/write cycle. There are 3 bits preserved
in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
and PM1_STATUS[11].
http://bugzilla.kernel.org/show_bug.cgi?id=3691
Implemented the initial deployment of new OSL mutex
interfaces. Since some host operating systems have
separate mutex and semaphore objects, this feature was
requested. The base code now uses mutexes (and the new
mutex interfaces) wherever a binary semaphore was used
previously. However, for the current release, the mutex
interfaces are defined as macros to map them to the
existing semaphore interfaces.
Fixed several problems with the support for the control
method SyncLevel parameter. The SyncLevel now works
according to the ACPI specification and in concert with the
Mutex SyncLevel parameter, since the current SyncLevel is
a property of the executing thread. Mutual exclusion for
control methods is now implemented with a mutex instead
of a semaphore.
Fixed three instances of the use of the C shift operator
in the bitfield support code (exfldio.c) to avoid the use
of a shift value larger than the target data width. The
behavior of C compilers is undefined in this case and can
cause unpredictable results, and therefore the case must
be detected and avoided. (Fiodor Suietov)
Added an info message whenever an SSDT or OEM table
is loaded dynamically via the Load() or LoadTable()
ASL operators. This should improve debugging capability
since it will show exactly what tables have been loaded
(beyond the tables present in the RSDT/XSDT.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Create a driver which lives in the acpi subsystem to handle dock events.
This driver is not an "ACPI" driver, because acpi drivers require that the
object be present when the driver is loaded.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (65 commits)
ACPI: suppress power button event on S3 resume
ACPI: resolve merge conflict between sem2mutex and processor_perflib.c
ACPI: use for_each_possible_cpu() instead of for_each_cpu()
ACPI: delete newly added debugging macros in processor_perflib.c
ACPI: UP build fix for bugzilla-5737
Enable P-state software coordination via _PDC
P-state software coordination for speedstep-centrino
P-state software coordination for acpi-cpufreq
P-state software coordination for ACPI core
ACPI: create acpi_thermal_resume()
ACPI: create acpi_fan_suspend()/acpi_fan_resume()
ACPI: pass pm_message_t from acpi_device_suspend() to root_suspend()
ACPI: create acpi_device_suspend()/acpi_device_resume()
ACPI: replace spin_lock_irq with mutex for ec poll mode
ACPI: Allow a WAN module enable/disable on a Thinkpad X60.
sem2mutex: acpi, acpi_link_lock
ACPI: delete unused acpi_bus_drivers_lock
sem2mutex: drivers/acpi/processor_perflib.c
ACPI add ia64 exports to build acpi_memhotplug as a module
ACPI: asus_acpi_init(): propagate correct return value
...
Manual resolve of conflicts in:
arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
include/acpi/processor.h
Consolidate the various arch-specific implementations of pxm_to_node() and
node_to_pxm() into a single generic version.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Converted the locking mutex used for the ACPI hardware
to a spinlock. This change should eliminate all problems
caused by attempting to acquire a semaphore at interrupt
level, and it means that all ACPICA external interfaces
that directly access the ACPI hardware can be safely
called from interrupt level.
Fixed a regression introduced in 20060526 where the ACPI
device initialization could be prematurely aborted with
an AE_NOT_FOUND if a device did not have an optional
_INI method.
Fixed an IndexField issue where a write to the Data
Register should be limited in size to the AccessSize
(width) of the IndexField itself. (BZ 433, Fiodor Suietov)
Fixed problem reports (Valery Podrezov) integrated: - Allow
store of ThermalZone objects to Debug object.
http://bugzilla.kernel.org/show_bug.cgi?id=5369http://bugzilla.kernel.org/show_bug.cgi?id=5370
Fixed problem reports (Fiodor Suietov) integrated: -
acpi_get_table_header() doesn't handle multiple instances
correctly (BZ 364)
Removed four global mutexes that were obsolete and were
no longer being used.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Restructured, flattened, and simplified the internal
interfaces for namespace object evaluation - resulting
in smaller code, less CPU stack use, and fewer
interfaces. (With assistance from Mikhail Kouzmich)
Fixed a problem with the CopyObject operator where the
first parameter was not typed correctly for the parser,
interpreter, compiler, and disassembler. Caused various
errors and unexpected behavior.
Fixed a problem where a ShiftLeft or ShiftRight of
more than 64 bits produced incorrect results with some
C compilers. Since the behavior of C compilers when
the shift value is larger than the datatype width is
apparently not well defined, the interpreter now detects
this condition and simply returns zero as expected in all
such cases. (BZ 395)
Fixed problem reports (Valery Podrezov) integrated: -
Update String-to-Integer conversion to match ACPI 3.0A spec
http://bugzilla.kernel.org/show_bug.cgi?id=5329
Allow interpreter to handle nested method declarations
http://bugzilla.kernel.org/show_bug.cgi?id=5361
Fixed problem reports (Fiodor Suietov) integrated: -
acpi_terminate() doesn't free debug memory allocation
list objects (BZ 355) - After Core Subsystem
shutdown, acpi_subsystem_status() returns AE_OK (BZ 356) -
acpi_os_unmap_memory() for RSDP can be invoked inconsistently
(BZ 357) - Resource Manager should return AE_TYPE for
non-device objects (BZ 358) - Incomplete cleanup branch
in AcpiNsEvaluateRelative (BZ 359) - Use acpi_os_free()
instead of ACPI_FREE in acpi_rs_set_srs_method_data (BZ 360)
- Incomplete cleanup branch in acpi_ps_parse_aml (BZ 361) -
Incomplete cleanup branch in acpi_ds_delete_walk_state (BZ 362)
- acpi_get_table_header returns AE_NO_ACPI_TABLES until DSDT
is loaded (BZ 365) - Status of the Global Initialization
Handler call not used (BZ 366) - Incorrect object parameter
to Global Initialization Handler (BZ 367)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Replaced the acpi_os_queue_for_execution() with a new
interface named acpi_os_execute(). The major difference is
that the new interface does not have a Priority parameter,
this appeared to be useless and has been replaced by
a Type parameter. The Type tells the OS what type of
execution is being requested, such as global lock handler,
notify handler, GPE handler, etc. This allows the host
to queue and execute the request as appropriate for the
request type, possibly using different work queues and
different priorities for the various request types. This
enables fixes for multithreading deadlock problems such as
http://bugzilla.kernel.org/show_bug.cgi?id=5534
(Alexey Starikovskiy and Bob Moore)
Fixed a possible memory leak associated with the
support for the so-called "implicit return" ACPI
extension. Reported by FreeBSD (Fiodor Suietov)
http://bugzilla.kernel.org/show_bug.cgi?id=6514
Fixed a problem with the Load() operator where a table
load from an operation region could overwrite an internal
table buffer by up to 7 bytes and cause alignment faults
on IPF systems. (With assistance from Luming Yu)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)
Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)
Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.
Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)
Defined and deployed a new OSL interface,
acpi_os_validate_address(). This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)
Defined and deployed a new OSL interface,
acpi_os_validate_interface(). This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)
Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)
Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.
The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented the use of a cache object for all internal
namespace nodes. Since there are about 1000 static nodes
in a typical system, this will decrease memory use for
cache implementations that minimize per-allocation overhead
(such as a slab allocator.)
Removed the reference count mechanism for internal
namespace nodes, since it was deemed unnecessary. This
reduces the size of each namespace node by about 5%-10%
on all platforms. Nodes are now 20 bytes for the 32-bit
case, and 32 bytes for the 64-bit case.
Optimized several internal data structures to reduce
object size on 64-bit platforms by packing data within
the 64-bit alignment. This includes the frequently used
ACPI_OPERAND_OBJECT, of which there can be ~1000 static
instances corresponding to the namespace objects.
Added two new strings for the predefined _OSI method:
"Windows 2001.1 SP1" and "Windows 2006".
Split the allocation tracking mechanism out to a separate
file, from utalloc.c to uttrack.c. This mechanism appears
to be only useful for application-level code. Kernels may
wish to not include uttrack.c in distributions.
Removed all remnants of the obsolete ACPI_REPORT_* macros
and the associated code. (These macros have been replaced
by the ACPI_ERROR and ACPI_WARNING macros.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
updated and tested by Konstantin Karasyov
http://bugzilla.kernel.org/show_bug.cgi?id=5000
Signed-off-by: Patrick Mochel <patrick.mochel@intel.com>
Signed-off-by: Konstantin Karasyov <konstantin.karasyov @intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Nobody looks at the return value, and this brings it into line with
pci_unregister_driver(), etc. Also removed validation of the driver
pointer passed in to register and unregister. More consistent, and we'll
find bugs faster if we fault rather than returning an error that's ignored.
Also makes internal functions acpi_device_unregister() and
acpi_driver_detach() void, since nobody uses their returns either.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Tagged all external interfaces to the subsystem with the
new ACPI_EXPORT_SYMBOL macro. This macro can be defined
as necessary to assist kernel integration. For Linux,
the macro resolves to the EXPORT_SYMBOL macro. The default
definition is NULL.
Added the ACPI_THREAD_ID type for the return value from
acpi_os_get_thread_id(). This allows the host to define this
as necessary to simplify kernel integration. The default
definition is ACPI_NATIVE_UINT.
Valery Podrezov fixed two interpreter problems related
to error processing, the deletion of objects, and placing
invalid pointers onto the internal operator result stack.
http://bugzilla.kernel.org/show_bug.cgi?id=6028http://bugzilla.kernel.org/show_bug.cgi?id=6151
Increased the reference count threshold where a warning is
emitted for large reference counts in order to eliminate
unnecessary warnings on systems with large namespaces
(especially 64-bit.) Increased the value from 0x400
to 0x800.
Due to universal disagreement as to the meaning of the
'c' in the calloc() function, the ACPI_MEM_CALLOCATE
macro has been renamed to ACPI_ALLOCATE_ZEROED so that the
purpose of the interface is 'clear'. ACPI_MEM_ALLOCATE and
ACPI_MEM_FREE are renamed to ACPI_ALLOCATE and ACPI_FREE.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented a change to the IndexField support to match
the behavior of the Microsoft AML interpreter. The value
written to the Index register is now a byte offset,
no longer an index based upon the width of the Data
register. This should fix IndexField problems seen on
some machines where the Data register is not exactly one
byte wide. The ACPI specification will be clarified on
this point.
Fixed a problem where several resource descriptor
types could overrun the internal descriptor buffer due
to size miscalculation: VendorShort, VendorLong, and
Interrupt. This was noticed on IA64 machines, but could
affect all platforms.
Fixed a problem where individual resource descriptors were
misaligned within the internal buffer, causing alignment
faults on IA64 platforms.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Removed a couple of extraneous ACPI_ERROR messages that
appeared during normal execution. These became apparent
after the conversion from ACPI_DEBUG_PRINT.
Fixed a problem where the CreateField operator could hang
if the BitIndex or NumBits parameter referred to a named
object. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5359
Fixed a problem where a DeRefOf operation on a buffer
object incorrectly failed with an exception. This also
fixes a couple of related RefOf and DeRefOf issues.
From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5360http://bugzilla.kernel.org/show_bug.cgi?id=5387http://bugzilla.kernel.org/show_bug.cgi?id=5392
Fixed a problem where the AE_BUFFER_LIMIT exception was
returned instead of AE_STRING_LIMIT on an out-of-bounds
Index() operation. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5480
Implemented a memory cleanup at the end of the execution
of each iteration of an AML While() loop, preventing the
accumulation of outstanding objects. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5427
Eliminated a chunk of duplicate code in the object
resolution code. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5336
Fixed several warnings during the 64-bit code generation.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Export the acpi_bus_trim function so that the pci hotplug driver can
use it.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implemented support in the Resource Manager to allow
unresolved namestring references within resource package
objects for the _PRT method. This support is in addition
to the previously implemented unresolved reference
support within the AML parser. If the interpreter slack
mode is enabled (true on Linux unless acpi=strict),
these unresolved references will be passed through
to the caller as a NULL package entry.
http://bugzilla.kernel.org/show_bug.cgi?id=5741
Implemented and deployed new macros and functions for
error and warning messages across the subsystem. These
macros are simpler and generate less code than their
predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION,
ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_*
macros.
Implemented the acpi_cpu_flags type to simplify host OS
integration of the Acquire/Release Lock OSL interfaces.
Suggested by Steven Rostedt and Andrew Morton.
Fixed a problem where Alias ASL operators are sometimes
not correctly resolved. causing AE_AML_INTERNAL
http://bugzilla.kernel.org/show_bug.cgi?id=5189http://bugzilla.kernel.org/show_bug.cgi?id=5674
Fixed several problems with the implementation of the
ConcatenateResTemplate ASL operator. As per the ACPI
specification, zero length buffers are now treated as a
single EndTag. One-length buffers always cause a fatal
exception. Non-zero length buffers that do not end with
a full 2-byte EndTag cause a fatal exception.
Fixed a possible structure overwrite in the
AcpiGetObjectInfo external interface. (With assistance
from Thomas Renninger)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Added 2006 copyright.
At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n
Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_processor_write_throttling()
acpi_processor_write_limit()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented optional support to allow unresolved names
within ASL Package objects. A null object is inserted in
the package when a named reference cannot be located in
the current namespace. Enabled via the interpreter slack
flag which Linux has enabled by default (acpi=strict
to disable slack). This should eliminate AE_NOT_FOUND
exceptions seen on machines that contain such code.
Implemented an optimization to the initialization
sequence that can improve boot time. During ACPI device
initialization, the _STA method is now run if and only
if the _INI method exists. The _STA method is used to
determine if the device is present; An _INI can only be
run if _STA returns present, but it is a waste of time to
run the _STA method if the _INI does not exist. (Prototype
and assistance from Dong Wei)
Implemented use of the C99 uintptr_t for the pointer
casting macros if it is available in the current
compiler. Otherwise, the default (void *) cast is used
as before.
Fixed some possible memory leaks found within the
execution path of the Break, Continue, If, and CreateField
operators. (Valery Podrezov)
Fixed a problem introduced in the 20051202 release where
an exception is generated during method execution if a
control method attempts to declare another method.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This is an interim patch until changes in an updated
ACPICA core increase the limit to 255.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Modified the parsing of control methods to no longer
create namespace objects during the first pass of the
parse. Objects are now created only during the execute
phase, at the moment the namespace creation operator
is encountered in the AML (Name, OperationRegion,
CreateByteField, etc.) This should eliminate ALREADY_EXISTS
exceptions seen on some machines where reentrant control
methods are protected by an AML mutex. The mutex will now
correctly block multiple threads from attempting to create
the same object more than once.
Increased the number of available Owner Ids for namespace
object tracking from 32 to 255. This should eliminate the
OWNER_ID_LIMIT exceptions seen on some machines with a
large number of ACPI tables (either static or dynamic).
Enhanced the namespace dump routine to output the owner
ID for each namespace object.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fixed a problem in the AML parser where the method thread
count could be decremented below zero if any errors
occurred during the method parse phase. This should
eliminate AE_AML_METHOD_LIMIT exceptions seen on some
machines. This also fixed a related regression with the
mechanism that detects and corrects methods that cannot
properly handle reentrancy (related to the deployment of
the new OwnerId mechanism.)
Eliminated the pre-parsing of control methods (to detect
errors) during table load. Related to the problem above,
this was causing unwind issues if any errors occurred
during the parse, and it seemed to be overkill. A table
load should not be aborted if there are problems with
any single control method, thus rendering this feature
rather pointless.
Fixed a problem with the new table-driven resource manager
where an internal buffer overflow could occur for small
resource templates.
Implemented a new external interface, acpi_get_vendor_resource()
This interface will find and return a vendor-defined
resource descriptor within a _CRS or _PRS
method via an ACPI 3.0 UUID match. (from Bjorn Helgaas)
Removed the length limit (200) on string objects as
per the upcoming ACPI 3.0A specification. This affects
the following areas of the interpreter: 1) any implicit
conversion of a Buffer to a String, 2) a String object
result of the ASL Concatentate operator, 3) the String
object result of the ASL ToString operator.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Modified the subsystem initialization sequence to improve
GPE support. The GPE initialization has been split into
two parts in order to defer execution of the _PRW methods
(Power Resources for Wake) until after the hardware is
fully initialized and the SCI handler is installed. This
allows the _PRW methods to access fields protected by the
Global Lock. This will fix systems where a NO_GLOBAL_LOCK
exception has been seen during initialization.
Fixed a regression with the ConcatenateResTemplate()
ASL operator introduced in the 20051021 release.
Implemented support for "local" internal ACPI object
types within the debugger "Object" command and the
acpi_walk_namespace() external interfaces. These local
types include RegionFields, BankFields, IndexFields, Alias,
and reference objects.
Moved common AML resource handling code into a new file,
"utresrc.c". This code is shared by both the Resource
Manager and the AML Debugger.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Implemented support for the EM64T and other x86_64
processors. This essentially entails recognizing
that these processors support non-aligned memory
transfers. Previously, all 64-bit processors were assumed
to lack hardware support for non-aligned transfers.
Completed conversion of the Resource Manager to nearly
full table-driven operation. Specifically, the resource
conversion code (convert AML to internal format and the
reverse) and the debug code to dump internal resource
descriptors are fully table-driven, reducing code and data
size and improving maintainability.
The OSL interfaces for Acquire and Release Lock now use a
64-bit flag word on 64-bit processors instead of a fixed
32-bit word. (Alexey Starikovskiy)
Implemented support within the resource conversion code
for the Type-Specific byte within the various ACPI 3.0
*WordSpace macros.
Fixed some issues within the resource conversion code for
the type-specific flags for both Memory and I/O address
resource descriptors. For Memory, implemented support
for the MTP and TTP flags. For I/O, split the TRS and TTP
flags into two separate fields.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Rafael J. Wysocki