Commit Graph

13 Commits

Author SHA1 Message Date
Russell King 411ef7f4cf [ARM] Remove asm/arch/irq.h
asm/arch/irq.h used to be included from asm/irq.h, but was removed
from the ARM kernel a long time ago.  Consequently, the contents
of asm/arch/irq.h (which mostly contain a definition for fixup_irq())
have not been used.  Hence, remove asm/arch/irq.h.

Some machine support files incorrectly included this file, making
little or no use of the contents.  Move the contents to a local
include file, and remove those include statements as well.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:46 +00:00
Nicolas Pitre 946d4935fc [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)
Patch from Nicolas Pitre

This field is redundent since it must be equal to PHYS_OFFSET anyway.

Now that no code uses it anymore, mark it deprecated and remove all
initializations from the tree.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 20:51:52 +00:00
Russell King 9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Richard Purdie 945b957972 [ARM] 3230/1: Sharp Scoop: Fix Shared Power Control Issues
Patch from Richard Purdie

The SL-Cxx00 devices have a power control register in SCOOP that is
shared by both CF and MMC/SD card slots. The CF reset code was resetting
this register leading to various lockups as the MMC power was suddenly
lost. This patch handles the CPR register in a more sensitive manner.

It also removes some unneeded collie specific calls as the reset code
handles this.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:57 +00:00
Richard Purdie 3125c68d70 [ARM] 3227/1: Spitz: Add pxa27x OHCI platform specific code
Patch from Richard Purdie

Add platform code to enable the ohci device on the pxa27x based
Sharp Zaurus Cxx00 devices.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:52 +00:00
Richard Purdie 94cabd003e [ARM] 3149/1: SharpSL: Add Akita (SL-C1000) machine support
Patch from Richard Purdie

Add the core machine support for the Sharp SL-C1000 (Akita)
and enable the Kconfig selection for it.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12 18:53:48 +00:00
Richard Purdie a63ae4427c [ARM] 3093/1: SharpSL PCMCIA Updates for Cxx00 models
Patch from Richard Purdie

The Sharp SL-Cxx00 models have a combined power control for the SD
and CF slot 0. This patch adds hooks to the scoop driver to allow
machines to provide a custom control function for this and such a
function is added for spitz/akita/borzoi.

It also moves the gpio init code into the machine files as this
is machine dependent and differs between some models. A couple of
warnings when compiling for collie are also fixed.

Signed-off-by: Richard Purdie
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 19:15:43 +00:00
Linus Torvalds 4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Richard Purdie dc07845d0c [ARM] 3069/1: Add spitz irda platform support
Patch from Richard Purdie

Add spitz irda platform support

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 14:50:25 +00:00
Russell King d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Richard Purdie 72023b63cc [ARM] 3013/1: Spitz: Fix compile errors
Patch from Richard Purdie

Remove a couple of lines of accidently added code causing compile
errors.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:27 +01:00
Richard Purdie cb38c569e5 [ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile error
Patch from Richard Purdie

Add a function to allow machines to set the parent of the pxa
framebuffer device. This means the power up/down sequence can be
controlled where required by the machine.

Update spitz to use the new function, fixing a compile error.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:25 +01:00
Richard Purdie 0dd28f1dd8 [PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support
Add the platform support code for two new Sharp Zaurus Models, Spitz
(SL-C3000) and Borzoi (SL-C3100).

This patch also adds most of the foundations for Akita (SL-C1000) Support.
The missing link for Akita is the driver for its I2C io expander.  Once this
has been finished, the missing Kconfig option and machine declaration can
easily be added to this code.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:31 -07:00