for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
-----BEGIN PGP SIGNATURE-----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=brp0
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
* tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: enable cpufreq support for RPi3
Most of the basic infrastructure is completed for BM1880 SoC except
common clock support. We are still couple of patchset away from
booting a distro from eMMC/SD with mainline. Below are the changes
for this cycle:
- Added Reset controller support to BM1880 SoC based on reset-simple
driver.
- Modified pinctrl memory map for BM1880 SoC. The initial pinctrl support
included the PWM registers as a part of the pinctrl memory map. But this
turned out to be useless as PWM registers are not handling any pin muxing
at all. So removed the PWM registers from pinctrl memory map.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl1FfmoACgkQVZ8R5v6R
zvXRbwf/ZS8GArYRVLrwLMBA7HpJ4tTTDKKauCsTH/fIdEneTZj6u2gWjKw8cKzt
hIZqZ0V+djiGuKf4CtXpZKyaOyf8MhPO7r9yrGUFMJVe4XsZijB4s7VVuFyULFHU
i3+GKPGptHUl7UPLg0+csbBPoY1vyzY/3g8TlKqEmjK6CU6qNIxu6k22AeDnNGmR
IF0g7/M2ucietDs4OugoVrwSDVtUm2g8voLafRLiKG6/HNTMtMGybv+LFb3yt0qU
asS2q2WTJMSbahhh5sTd2SRMc9YEPmp+i2xY1hqdM4TOfycH4A8b1Rp7FnSlMWoC
cpo6RmVIj+L1it5qKICRth2qRy08Tg==
=8nxl
-----END PGP SIGNATURE-----
Merge tag 'bitmain-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain into arm/dt
Bitmain SoC changes for v5.4:
Most of the basic infrastructure is completed for BM1880 SoC except
common clock support. We are still couple of patchset away from
booting a distro from eMMC/SD with mainline. Below are the changes
for this cycle:
- Added Reset controller support to BM1880 SoC based on reset-simple
driver.
- Modified pinctrl memory map for BM1880 SoC. The initial pinctrl support
included the PWM registers as a part of the pinctrl memory map. But this
turned out to be useless as PWM registers are not handling any pin muxing
at all. So removed the PWM registers from pinctrl memory map.
* tag 'bitmain-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain:
arm64: dts: bitmain: Modify pin controller memory map
arm64: dts: bitmain: Add reset controller support for BM1880 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* R-Car D3 (r8a77995) based Draak Board
- Correct backlight regulator name in device tree
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl1WsAkACgkQ189kaWo3
T76iZA//ST+Llf3DLMcmhFHci2ld8khWl+NcxVAKDjDXgxZ85jxqzxs2b8kshYoV
xAIdt+zwS5GOXpXjDbuw2uufLTEGrmS8v98NxBlxvmdr35PKQE6wXRs+YfisXlhL
bnY4pG8AT3NnN8iiQ4DWkRVmfvc2joaWmyczELvrPCSzLtguCAkjm9m7hfPiVxT+
L5tf01LhYGxRdYoXI/c+kIDyYfgQOhcGMkIk22R3p+l9QM2NE8HqhMPqAqPLYTNA
c/bueDoPxyFdNp7drPMTdkWzovQ0fsslXT1GvbZ6MHJN4e2OurcGHsoU5m/gUJrH
f6C6y3Jw/nInRI13SeI3hAAHnmycND1O5TPqfYMJksmJU2c5x1Zabj2Su4ztNUPa
rMxF4wgqPzqLXDT1xcCacdgUketgYrRmcGUE/KkEIZxcx2eVrLN9TSZ8iOr0ic/E
pwxWUF9OobNYb20sJEiV3esYAwcQq/tqSnr6Hd4vBd2ptqZAOq81mfvt4wnJuwuO
jAAtyV7cdO49lpKf97WfCdqZvArpohKoF6w4Zi9TDBtFGkOj5lkNATc7w6eJkcye
vUDmJ2+9zR+auGMCn3kwzG62yO4KJDnGJgjxMsXh1Kt1MQgpVI2wTFczJUaC4/M2
Lcq+pShfI1qYvAeyy+80RRkR5jiyfGncrrpq1dnYeX6HC8E946w=
=YACQ
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes
Renesas ARM Based SoC Fixes for v5.3
* R-Car D3 (r8a77995) based Draak Board
- Correct backlight regulator name in device tree
* tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYqWeAAoJEFBXWFqHsHzO8h8H+wTFJx+q4CF7Z8l+3OCR5rNQ
RSC3gaiYLhQUCEx+HVnvzDvhovdJNyoHiT6qdYqHIO5BYMmacsuWYwuZveaSePCl
WYZ0XkIuvMDZu4KFkl3ufEZx73u/7hbY1s4PevWm7KDeHY28XyWfflX0aW2yM/2Q
1Q/bNjMnsFGJPItBModiwS9lNjxMl7K9XBU47m0K/sJV4LFxbl+2OmfmaQYn4Ook
PAa4XbRH3d/Ff+jXrbwSy+AZZfpsiwDPV6cEwaAOTGr0O6+jKGRzqyAYNTANwjfU
ihUhy/XBjX2GRmGVxqTthDgktoSfX9eVQFU4WfDiHjRYO3y6vpBccC1ixpawUEM=
=iYpD
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.4:
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
arm64: defconfig: Build imx8 ddr pmu as module
arm64: defconfig: Select CONFIG_CLK_IMX8MN by default
arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/4nQAKCRDj7w1vZxhR
xdi9AQC1om2jja54gplSpDKxYzPsAphLlmSNzKKQ5+mzjj1J3gD/VNdkUyw/V2Pk
g/DAuPRgpZWS1ab82Lr08z6RDeFynwk=
=R83T
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.4
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
* tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable Sun4i SPDIF module
arm64: defconfig: Enable IR SUNXI option
Link: https://lore.kernel.org/r/24f215ca-f3a8-4497-bf98-9ba1808b37be.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add mailbox support on Armada 37xx
- Add cpu clock node needed for CPU freq on Armada 7K/8K
- Enhance CP110 COMPHY support used by PCIe, USB3 and SATA
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXWZRawAKCRALBhiOFHI7
1a9pAKCbNBlpgHH5wTFrz9crOunl+zSe8gCgrCcCGiTwyKyPdPDEcZLd25eYQz4=
=/vad
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.4-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.4 (part 1)
- Add mailbox support on Armada 37xx
- Add cpu clock node needed for CPU freq on Armada 7K/8K
- Enhance CP110 COMPHY support used by PCIe, USB3 and SATA
* tag 'mvebu-dt64-5.4-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
arm64: dts: marvell: Add CP110 COMPHY clocks
arm64: dts: marvell: armada-37xx: add mailbox node
Link: https://lore.kernel.org/r/875zmhzjml.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse,
PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board.
- Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM.
- Update OPP table according to latest data sheet and add opp-suspend
to OPP table for i.MX8MQ and i.MX8MM.
- Add IDEL states for i.MX8MM SoC.
- Correct I2C clock divider for Layerscape SoCs.
- Add series alias and LPUART baud clock for i.MX8QXP SoC.
- Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5
board.
- Enable USB1 and Type-C support for i.MX8MM EVK board.
- Add Thermal Monitor Unit support for LS1028A SoC.
- Misc small update and correction on Layerscape and i.MX8 support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYqNmAAoJEFBXWFqHsHzOXFoH/2x5pFXOcHkGcfjWAjguYu4C
gd+fgY/KIBR/t9Fk0Etvi6TRxB6qU061zOrjQSRIB8NCv7zy9P4LuJnyHQsJB8fw
XRYExzxtnsH2NAwpLQN1CX4AFqe9hGEGM3xspck6DQAA5S1fQUBSaak88WqEgfQp
kpf+PnoLMtrG6aUYHQbZXP1WSweH9w6zZwJUlN9YxTeJO91cHCbXdKPZ7NkLasxM
5hLeE8LCFaPGXeAPcgCXyweu2Lv9ncp5R+hx6tb4psfOd18RVz6mTWPYerAW7P/U
EBP/0hTm+7Lk4G4sZJ8a06Of1wBpDD1QprMa0fslzFRt7QzgbOYEvPINlVXRTAk=
=1mGW
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.4:
- New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse,
PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board.
- Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM.
- Update OPP table according to latest data sheet and add opp-suspend
to OPP table for i.MX8MQ and i.MX8MM.
- Add IDEL states for i.MX8MM SoC.
- Correct I2C clock divider for Layerscape SoCs.
- Add series alias and LPUART baud clock for i.MX8QXP SoC.
- Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5
board.
- Enable USB1 and Type-C support for i.MX8MM EVK board.
- Add Thermal Monitor Unit support for LS1028A SoC.
- Misc small update and correction on Layerscape and i.MX8 support.
* tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
arm64: dts: fsl: add support for Hummingboard Pulse
arm64: dts: ls1088a: update gpio compatible
arm64: dts: imx: Add i.mx8mq nitrogen8m basic dts support
arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller
arm64: dts: ls1088a: Add the DSPI controller node
arm64: dts: imx8mm: Enable cpu-idle driver
arm64: dts: ls1028a: Add esdhc node in dts
arm64: dts: ls1028a: Add properties node for Display output pixel clock
arm64: dts: lx2160a: Fix incorrect I2C clock divider
arm64: dts: ls1028a: Fix incorrect I2C clock divider
arm64: dts: ls1012a: Fix incorrect I2C clock divider
arm64: dts: ls1088a: Fix incorrect I2C clock divider
arm64: dts: ls1028a: fix gpio nodes
arm64: dts: ls1028a: Add Thermal Monitor Unit node
arm64: dts: imx8mq-evk: Unbypass audio_pll1
arm64: dts: imx8mm: Add opp-suspend property to OPP table
arm64: dts: imx8mq: Add opp-suspend property to OPP table
arm64: dts: ls1088a: Revise gpio registers to little-endian
arm64: dts: add the console node for DPAA2 platforms
...
Link: https://lore.kernel.org/r/20190825153237.28829-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board
device tree support.
- Add DSP device tree support for i.MX8QXP SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYom7AAoJEFBXWFqHsHzOVG8H/RTfCTmRCBaClVZ031GWl/Q2
2NP+AY1l8UE0NKsvEuoMf/VY1atvFNgDvbm4gV1PW5KOBbgZmB3M32lHvXfqbLOu
vACCc8b7JY/8scWUgQBNbE5xAiZjPkLPuIYNJTLmrgVrYkYhtkB/4pwAk9YjVlYt
eHF3SWizKmam8vV3yp6KUNKvEYPBiMBfjSHDUvgT0GHUB4SHpPm/ERruTdKxP0Zm
c730yvV320XiKvxuErdvNfsw6FWs8Bhp8xCIhvF4Wbm0w4c5ucuqHKSV1v63lbbj
GVfdi0cH/eKlugNhfhIH7RsYL5TYjCDwzEyBSnqGCaBW+gnTpRnFkEricgvB+yY=
=3nO3
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree update with new clocks:
- A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board
device tree support.
- Add DSP device tree support for i.MX8QXP SoC.
* tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qxp: Add DSP DT node
arm64: dts: imx8mn: Add cpu-freq support
arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support
arm64: dts: imx8mn-ddr4-evk: Add i2c1 support
arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support
arm64: dts: imx8mn: Add gpio-ranges property
arm64: dts: freescale: Add i.MX8MN dtsi support
clk: imx8: Add DSP related clocks
clk: imx: Add support for i.MX8MN clock driver
clk: imx: Add API for clk unregister when driver probe fail
clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usage
dt-bindings: imx: Add clock binding doc for i.MX8MN
Link: https://lore.kernel.org/r/20190825153237.28829-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/6JgAKCRDj7w1vZxhR
xc+VAQDjZWvNeMX75qsrz7Jbdy7jlbJJ/oDFBGx3C4clcTn7tgD6AsHeM760Pc6o
4a7G5DGcJakuFGsb1s4hNQOylmG3IQ4=
=pXxO
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
arm64: dts: allwinner: orange-pi-3: Enable WiFi
ARM: dts: sunxi: Add missing watchdog clocks
ARM: dts: sunxi: Add missing watchdog interrupts
arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
ARM: dts: sun7i: Add CSI0 controller
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
ARM: dts: v3s: Change the timers compatible
ARM: dts: h3: Change the timers compatible
ARM: dts: a83t: Change the timers compatible
ARM: dts: a23/a33: Change the timers compatible
ARM: dts: sun6i: Add missing timers interrupts
ARM: dts: sun5i: Add missing timers interrupts
ARM: dts: sun4i: Add missing timers interrupts
dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
arm64: allwinner: h6: add I2C nodes
dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
ARM: dts: sunxi: Add mdio bus sub-node to GMAC
...
Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Optimize modulo operation instruction generation by
using single MSUB instruction vs MUL followed by SUB
instruction scheme.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
the Kevin Chromebook and a new board the Leez P710 SBC.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl1X/7UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSeCB/4o5aQ6PRfpm+TnXIdiw1GqnhAp3lhQLtT/
jZkSAiANcH2tFyFiPOjPDARbnd7T2J8ZxfBzJt5/5z/VsCpwh0BQGJFXq4Htbnfj
d9YkhS7N9y1tRuCregpD/0LcKXSdttmYXiiHUzuL3FzNtU1U5buXf4pyDDwqtvNN
AYiKYvUixO+Sr3J71Ww4WWXZUt/m2VEN4MPvjjheMSWCSmSV3pw1yjKSb+MpovfP
tBdPjOCKizDm2W/+5eLCH4HbV6A7bp5GA4v71Qt9B5UT1RxdZ4befx9JJqgJteDw
uEyHiSyf4jdjczHAxMryuev0yiU2r/UsGGintDLMggpAI6dcXk9O
=52SD
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
PWM-Fan and nor-flash for the RockPro64, a better display mode for
the Kevin Chromebook and a new board the Leez P710 SBC.
* tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC
arm64: dts: rockchip: enable internal SPI flash for RockPro64.
arm64: dts: rockchip: Add PWM fan for RockPro64
arm64: dts: rockchip: Specify override mode for kevin panel
Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org
Link: https://lore.kernel.org/r/2362486.gYoCZEsBuK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Drop AR8031 PHY TX delay adjusting from i.MX7D machine code, as
it's superfluous due to the recent changes to Atheros AT803X driver.
- Select TIMER_IMX_SYS_CTR for arm64 ARCH_MXC platform, since the
system counter is needed as broadcast timer for cpuidle support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYoI2AAoJEFBXWFqHsHzOxAsH/iKDF5cqmAOdNbD/0stFIxCV
ic+OX45aXyzbtSmD44sp0zuqGVA5RRu/OwYWlKA7WZHoeUUfbKMsMw9knO/ZaQTD
m9CwMuuA8bZhJUWSjbSpqlLJfdqzhnzkGuyq9A6IDqjf0y7eILD7km+YAZPNTBvo
LvvJnLhCI7FKY8miWpMe1pAY3XvzPTqlb1J0LywrJowXyVU9fJWVh7wSPTeDYsS1
+PQCTsnTX5Lm5rvV7px9ADwIzYq7qwuIVOfXwG+H1yMJRefQaWKePGb36KOHU+9S
isHiSYFSKw0BzLIGr2uap54LKaaprJiHdvUMncU8c3M+2hjWWNtlDkgZwUULluM=
=8VOJ
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC changes for 5.4:
- Drop AR8031 PHY TX delay adjusting from i.MX7D machine code, as
it's superfluous due to the recent changes to Atheros AT803X driver.
- Select TIMER_IMX_SYS_CTR for arm64 ARCH_MXC platform, since the
system counter is needed as broadcast timer for cpuidle support.
* tag 'imx-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: stop adjusting ar8031 phy tx delay
arm64: Enable TIMER_IMX_SYS_CTR for ARCH_MXC platforms
Link: https://lore.kernel.org/r/20190825153237.28829-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in
drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the
'default ARCH_QCOM' directive.
Add the two options explicitly in the arm64 defconfig, to avoid
functional regressions.
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[bjorn: Rewrote subject]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to separate out the ARM64 portions.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
150MHz is a fundamental limitation of RK3328 Soc, w/o this limitation,
eMMC, for instance, will run into 200MHz clock rate in HS200 mode, which
makes the RK3328 boards not always boot properly. By adding it in
rk3328.dtsi would also obviate the worry of missing it when adding new
boards.
Fixes: 52e02d377a ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Cc: stable@vger.kernel.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Liang Chen <cl@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Most archs (well at least x86) store the function call return address on the
stack before storing the local variables for the function. The max stack
tracer depends on this in its algorithm to display the stack size of each
function it finds in the back trace.
Some archs (arm64), may store the return address (from its link register)
just before calling a nested function. There's no reason to save the link
register on leaf functions, as it wont be updated. This breaks the algorithm
of the max stack tracer.
Add a new define ARCH_FTRACE_SHIFT_STACK_TRACER that an architecture may set
if it stores the return address (link register) after it stores the
function's local variables, and have the stack trace shift the values of the
mapped stack size to the appropriate functions.
Link: 20190802094103.163576-1-jiping.ma2@windriver.com
Reported-by: Jiping Ma <jiping.ma2@windriver.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This adds support for the Turris Mox board from CZ.NIC.
Turris Mox is as modular router based on the Armada 3720 SOC (same as
EspressoBin).
The basic board can be extended by different modules.
If those are connected, U-Boot lets the kernel know via device-tree.
Since modules can be connected in different order and some modules can
be connected multiple times (up to three modules containing 8-port
ethernet switch in DSA configuration can be connected) we decided
against using device-tree overlays, because it got complicated rather
quickly. (For example the SFP module can be connected directly to the
CPU, or after a switch module. There are four cases and all would need
different SFP overlay. There are two types of switch modules (8-port
with pass-through and 4-port with no pass-through). For those we would
again need at least 6 more overlays.)
We therefore decided to put all the possibly connected devices in one
device-tree and disable them by default. When U-Boot finds out which
modules are connected, it fixes the loaded device-tree accordingly just
before boot. By Rob Herring's suggestion we also made it so that U-Boot
completely removes nodes which are disabled after this fixup.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Rob Herring <robh@kernel.org>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This adds pinctrl node for the GPIO to be used as SPI chip select 1.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The majority of the fixes this time are for OMAP hardware,
here is a breakdown of the significant changes:
Various device tree bug fixes:
- TI am57xx boards need a voltage level fix to avoid damaging SD cards
- vf610-bk4 fails to detect its flash due to an incorrect description
- meson-g12a USB phy configuration fails
- meson-g12b reboot should not power off the SD card
- Some corrections for apparently harmless differences from the
documentation.
Regression fixes:
- ams-delta FIQ interrupts broke in 5.3
- TI am3/am4 mmc controllers broke in 5.2
The logic_pio driver (used on some Huawei ARM servers) needs a few
bug fixes for reliability.
A couple of compile-time warning fixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=mV+7
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of the fixes this time are for OMAP hardware, here is a
breakdown of the significant changes:
Various device tree bug fixes:
- TI am57xx boards need a voltage level fix to avoid damaging SD
cards
- vf610-bk4 fails to detect its flash due to an incorrect description
- meson-g12a USB phy configuration fails
- meson-g12b reboot should not power off the SD card
- Some corrections for apparently harmless differences from the
documentation.
Regression fixes:
- ams-delta FIQ interrupts broke in 5.3
- TI am3/am4 mmc controllers broke in 5.2
The logic_pio driver (used on some Huawei ARM servers) got a few bug
fixes for reliability.
And a couple of compile-time warning fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
soc: ti: pm33xx: Make two symbols static
soc: ti: pm33xx: Fix static checker warnings
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: dts: Fix incomplete dts data for am3 and am4 mmc
bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
ARM: dts: dra74x: Fix iodelay configuration for mmc3
ARM: dts: am335x: Fix UARTs length
ARM: OMAP2+: Fix omap4 errata warning on other SoCs
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
arm64: dts: meson-g12a-sei510: enable IR controller
arm64: dts: meson-g12a: add missing dwc2 phy-names
ARM: dts: vf610-bk4: Fix qspi node description
ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
...
* for-next/52-bit-kva: (25 commits)
Support for 52-bit virtual addressing in kernel space
* for-next/cpu-topology: (9 commits)
Move CPU topology parsing into core code and add support for ACPI 6.3
* for-next/error-injection: (2 commits)
Support for function error injection via kprobes
* for-next/perf: (8 commits)
Support for i.MX8 DDR PMU and proper SMMUv3 group validation
* for-next/psci-cpuidle: (7 commits)
Move PSCI idle code into a new CPUidle driver
* for-next/rng: (4 commits)
Support for 'rng-seed' property being passed in the devicetree
* for-next/smpboot: (3 commits)
Reduce fragility of secondary CPU bringup in debug configurations
* for-next/tbi: (10 commits)
Introduce new syscall ABI with relaxed requirements for pointer tags
* for-next/tlbi: (6 commits)
Handle spurious page faults arising from kernel space
The 'K' constraint is a documented AArch64 machine constraint supported
by GCC for matching integer constants that can be used with a 32-bit
logical instruction. Unfortunately, some released compilers erroneously
accept the immediate '4294967295' for this constraint, which is later
refused by GAS at assembly time. This had led us to avoid the use of
the 'K' constraint altogether.
Instead, detect whether the compiler is up to the job when building the
kernel and pass the 'K' constraint to our 32-bit atomic macros when it
appears to be supported.
Signed-off-by: Will Deacon <will@kernel.org>
We use a bunch of internal macros when constructing our atomic and
cmpxchg routines in order to save on boilerplate. Avoid exposing these
directly to users of the header files.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Support for LSE atomic instructions (CONFIG_ARM64_LSE_ATOMICS) relies on
a static key to select between the legacy LL/SC implementation which is
available on all arm64 CPUs and the super-duper LSE implementation which
is available on CPUs implementing v8.1 and later.
Unfortunately, when building a kernel with CONFIG_JUMP_LABEL disabled
(e.g. because the toolchain doesn't support 'asm goto'), the static key
inside the atomics code tries to use atomics itself. This results in a
mess of circular includes and a build failure:
In file included from ./arch/arm64/include/asm/lse.h:11,
from ./arch/arm64/include/asm/atomic.h:16,
from ./include/linux/atomic.h:7,
from ./include/asm-generic/bitops/atomic.h:5,
from ./arch/arm64/include/asm/bitops.h:26,
from ./include/linux/bitops.h:19,
from ./include/linux/kernel.h:12,
from ./include/asm-generic/bug.h:18,
from ./arch/arm64/include/asm/bug.h:26,
from ./include/linux/bug.h:5,
from ./include/linux/page-flags.h:10,
from kernel/bounds.c:10:
./include/linux/jump_label.h: In function ‘static_key_count’:
./include/linux/jump_label.h:254:9: error: implicit declaration of function ‘atomic_read’ [-Werror=implicit-function-declaration]
return atomic_read(&key->enabled);
^~~~~~~~~~~
[ ... more of the same ... ]
Since LSE atomic instructions are not critical to the operation of the
kernel, make them depend on JUMP_LABEL at compile time.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The contents of 'asm/atomic_arch.h' can be split across some of our
other 'asm/' headers. Remove it.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The 'alt_lse' assembly macro has been unused since 7c8fc35dfc
("locking/atomics/arm64: Replace our atomic/lock bitop implementations
with asm-generic").
Remove it.
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add an accelerated version of the 'essiv(cbc(aes),sha256)' skcipher,
which is used by fscrypt or dm-crypt on systems where CBC mode is
signficantly more performant than XTS mode (e.g., when using a h/w
accelerator which supports the former but not the latter) This avoids
a separate call into the AES cipher for every invocation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The plain CBC driver and the CTS one share some code that iterates over
a scatterwalk and invokes the CBC asm code to do the processing. The
upcoming ESSIV/CBC mode will clone that pattern for the third time, so
let's factor it out first.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The commit d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS")
incorrectly removed the chosen node and the stdout-path property.
Add these back.
Fixes: d4609acce187 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This enables DVFS for the Amlogic SM1 based SEI610 board by:
- Adding the SM1 SoC OPPs taken from the vendor tree
- Selecting the SM1 Clock controller instead of the G12A one
- Adding the CPU rail regulator, PWM and OPPs for each CPU nodes.
Each power supply can achieve 0.69V to 1.05V using a single PWM
output clocked at 666KHz with an inverse duty-cycle.
DVFS has been tested by running the arm64 cpuburn at [1] and cycling
between all the possible cpufreq translations of the cpu cluster and
checking the final frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the Amlogic SM1 based Khadas VIM3L, sharing all the same features
as the G12B based VIM3, but:
- a different DVFS support since only a single cluster is available
- audio is still not available on SM1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
To prepare support of the Amlogic SM1 based Khadas VIM3, move the non-G12B
specific nodes (all except DVFS and Audio) to a new meson-khadas-vim3.dtsi
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the reset to the TDM formatters of the g12a. This helps
with channel mapping when a playback/capture uses more than 1 lane.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The clock controller dedicated to audio clocks also provides reset lines
on the g12 SoC family
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This enables DVFS for the Amlogic SM1 based SEI610 board by:
- Adding the SM1 SoC OPPs taken from the vendor tree
- Selecting the SM1 Clock controller instead of the G12A one
- Adding the CPU rail regulator, PWM and OPPs for each CPU nodes.
Each power supply can achieve 0.69V to 1.05V using a single PWM
output clocked at 666KHz with an inverse duty-cycle.
DVFS has been tested by running the arm64 cpuburn at [1] and cycling
between all the possible cpufreq translations of the cpu cluster and
checking the final frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
add the rc-tx3mini keymap to the ir node
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
add the rc-wetek-play2 keymap to the ir node
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
add the rc-wetek-hub keymap to the ir node
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
add the rc-x96max keymap to the ir node
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
add the rc-odroid keymap to the ir node
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to
support the USB DRD Type-C port and the USB3 Type A port.
The USB DRD Type-C controller uses the ID signal to toggle the USB role
between the DWC3 Host controller and the DWC2 Device controller.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Replace the VPU-centric power domain controller by the generic system-wide
Everything-Else power domain controller and setup the right power-domains
properties on the VPU, Ethernet & USB nodes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[khilman: minor subject edit: add dts]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected)
meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected)
meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-p201.dt.yaml: ethernet@c9410000: snps,reset-delays-us: [[0, 10000, 1000000]] is too short
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-nanopi-k2.dt.yaml: /: 'model' is a required property
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-g12a-x96-max.dt.yaml: /: compatible: ['amediatech,x96-max', 'amlogic,u200', 'amlogic,g12a'] is not valid under any of the given schemas
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-g12a-u200.dt.yaml: reset-controller@1004: compatible:0: 'amlogic,meson-g12a-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset']
meson-g12a-sei510.dt.yaml: reset-controller@1004: compatible:0: 'amlogic,meson-g12a-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset']
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-axg-s400.dt.yaml: mailbox@ff63c404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu']
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxl-s805x-libretech-ac.dt.yaml: ethernet-phy@8: compatible: ['ethernet-phy-id0181.4400', 'ethernet-phy-ieee802.3-c22'] is not valid under any of the given schemas
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-nanopi-k2.dt.yaml: periphs@c8834000: $nodename:0: 'periphs@c8834000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
meson-gxl-s805x-libretech-ac.dt.yaml: periphs@c8834000: $nodename:0: 'periphs@c8834000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-nanopi-k2.dt.yaml: mailbox@404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu']
meson-gxl-s805x-libretech-ac.dt.yaml: mailbox@404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu']
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-nanopi-k2.dt.yaml: watchdog@98d0: compatible:0: 'amlogic,meson-gx-wdt' is not one of ['amlogic,meson-gxbb-wdt']
meson-gxl-s805x-libretech-ac.dt.yaml: watchdog@98d0: compatible:0: 'amlogic,meson-gx-wdt' is not one of ['amlogic,meson-gxbb-wdt']
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxl-s805x-libretech-ac.dt.yaml: spi@8c80: compatible:0: 'amlogic,meson-gx-spifc' is not one of ['amlogic,meson6-spifc', 'amlogic,meson-gxbb-spifc']
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxbb-nanopi-k2.dt.yaml: reset-controller@4404: compatible:0: 'amlogic,meson-gx-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset']
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-gxl-s805x-libretech-ac.dt.yaml: vpu@d0100000: reg-names: Additional items are not allowed ('dmc' was unexpected)
meson-gxl-s805x-libretech-ac.dt.yaml: vpu@d0100000: reg-names: ['vpu', 'hhi', 'dmc'] is too long
The 'dmc' register area was replaced by the amlogic,canvas property
which was introduced in commit f172604342 ("arm64: dts: meson-gx:
add dmcbus and canvas nodes.") and commit cf34287986 ("arm64: dts:
meson-gx: Add canvas provider node to the vpu")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This fixes the following DT schemas check errors:
meson-axg-s400.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long
meson-axg-s400.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short
meson-g12a-u200.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long
meson-g12a-u200.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short
meson-gxbb-nanopi-k2.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too long
meson-gxl-s805x-libretech-ac.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too lon
while here, also drop the redundant reg property from meson-gxl.dtsi
because it had the same value as meson-gx.dtsi from which it inherits.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
We no longer fall back to out-of-line atomics on systems with
CONFIG_ARM64_LSE_ATOMICS where ARM64_HAS_LSE_ATOMICS is not set.
Remove the unused compilation unit which provided these symbols.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that we have removed the out-of-line ll/sc atomics we can give
the compiler the freedom to choose its own register allocation.
Remove the hard-coded use of x30.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When building for LSE atomics (CONFIG_ARM64_LSE_ATOMICS), if the hardware
or toolchain doesn't support it the existing code will fallback to ll/sc
atomics. It achieves this by branching from inline assembly to a function
that is built with special compile flags. Further this results in the
clobbering of registers even when the fallback isn't used increasing
register pressure.
Improve this by providing inline implementations of both LSE and
ll/sc and use a static key to select between them, which allows for the
compiler to generate better atomics code. Put the LL/SC fallback atomics
in their own subsection to improve icache performance.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Based on an email from Will Deacon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The memory allocated for the atomic pool needs to have the same
mapping attributes that we use for remapping, so use
pgprot_dmacoherent instead of open coding it. Also deduct a
suitable zone to allocate the memory from based on the presence
of the DMA zones.
Signed-off-by: Christoph Hellwig <hch@lst.de>
arch_dma_mmap_pgprot is used for two things:
1) to override the "normal" uncached page attributes for mapping
memory coherent to devices that can't snoop the CPU caches
2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
arm systems and some mips platforms
Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Paul Burton <paul.burton@mips.com> # mips
The A64 ISA accepts distinct (but overlapping) ranges of immediates for:
* add arithmetic instructions ('I' machine constraint)
* sub arithmetic instructions ('J' machine constraint)
* 32-bit logical instructions ('K' machine constraint)
* 64-bit logical instructions ('L' machine constraint)
... but we currently use the 'I' constraint for many atomic operations
using sub or logical instructions, which is not always valid.
When CONFIG_ARM64_LSE_ATOMICS is not set, this allows invalid immediates
to be passed to instructions, potentially resulting in a build failure.
When CONFIG_ARM64_LSE_ATOMICS is selected the out-of-line ll/sc atomics
always use a register as they have no visibility of the value passed by
the caller.
This patch adds a constraint parameter to the ATOMIC_xx and
__CMPXCHG_CASE macros so that we can pass appropriate constraints for
each case, with uses updated accordingly.
Unfortunately prior to GCC 8.1.0 the 'K' constraint erroneously accepted
'4294967295', so we must instead force the use of a register.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The gic-its node unit-address has an additional zero compared
to the actual reg value. Fix it.
Fixes: 2d87061e70 ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Robert Tivy <rtivy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The gic-its node unit-address has an additional zero compared
to the actual reg value. Fix it.
Fixes: ea47eed33a ("arm64: dts: ti: Add Support for AM654 SoC")
Reported-by: Robert Tivy <rtivy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The Main NavSS block on J721E SoCs contains a HwSpinlock IP instance that
is same as the IP on AM65x SoCs and similar to the IP on some OMAP SoCs.
Add the DT node for this on J721E SoCs. The node is present within the
Main NavSS block, and is added as a child node under the cbass_main_navss
interconnect node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The Main NavSS block on AM65x SoCs contains a HwSpinlock IP instance
that is similar to the IP on some OMAP SoCs. Add the DT node for this
on AM65x SoCs. The node is present within the NavSS block, and is
added as a child node under the cbass_main_navss interconnect node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Common processor board for K3 J721E platform has two push buttons
namely SW10 and SW11.
Add a gpio-keys device node to model them as input keys in Linux.
Add required pinmux nodes to set GPIO pins as input.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
There are 10 gpio instances inside SoC with 3 groups as below:
- Group1: main_gpio0, main_gpio2, main_gpio4, main_gpio6
- Group2: main_gpio1, main_gpio3, main_gpio5, main_gpio7
- Group3: wkup_gpio0, wkup_gpio1
Only one instance can be used in each group at a time. So use main_gpio0,
main_gpio1 and wkup_gpio0 for the current linux context and mark other
gpio nodes as disabled.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Similar to the gpio groups in main domain, there is one gpio group
in wakup domain with 2 module instances in it. This gpio group pins
out 84 lines(6 banks). Add DT node for these 2 gpio module instances.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
There are 8 instances of gpio modules in main domain divided into 2 groups:
- Group1: gpio0, gpio2, gpio4, gpio6
- Group2: gpio1, gpio3, gpio5, gpio7
Groups are created to provide protection between two different processor
virtual worlds. There are x gpio lines coming out of each group. Each module
in a group has equal x gpio lines pinned out. There is a top level mux for
selecting the module instance for each pin coming out of group. Exactly
one module can be selected to control the corresponding pin. This muxing
can be controlled along the pad mux configuration registers.
Group1 pins out 128 lines(8 banks). Group 2 pins out 36 lines(2 banks).
Add DT nodes for each module instance in the main domain. Users should
make sure that correct gpio instance is selected in their pad configuration.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for processor boards
and it is used by different software entities like u-boot, atf,
linux simultaneously. So just mark main_uart0 as shared device
for common processor board.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for based boards
and it is used by different software entities like u-boot, atf,
linux. So just mark main_uart0 as shared device for base board.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
While the MMUs is disabled, I-cache speculation can result in
instructions being fetched from the PoC. During boot we may patch
instructions (e.g. for alternatives and jump labels), and these may be
dirty at the PoU (and stale at the PoC).
Thus, while the MMU is disabled in the KPTI pagetable fixup code we may
load stale instructions into the I-cache, potentially leading to
subsequent crashes when executing regions of code which have been
modified at runtime.
Similarly to commit:
8ec4198743 ("arm64: mm: ensure patched kernel text is fetched from PoU")
... we can invalidate the I-cache after enabling the MMU to prevent such
issues.
The KPTI pagetable fixup code itself should be clean to the PoC per the
boot protocol, so no maintenance is required for this code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
With 16K pages and 48-bit VAs, the PGD level of table has two entries,
and so the fixmap shares a PGD with the kernel image. Since commit:
f9040773b7 ("arm64: move kernel image to base of vmalloc area")
... we copy the existing fixmap to the new fine-grained page tables at
the PUD level in this case. When walking to the new PUD, we forgot to
offset the PGD entry and always used the PGD entry at index 0, but this
worked as the kernel image and fixmap were in the low half of the TTBR1
address space.
As of commit:
14c127c957 ("arm64: mm: Flip kernel VA space")
... the kernel image and fixmap are in the high half of the TTBR1
address space, and hence use the PGD at index 1, but we didn't update
the fixmap copying code to account for this.
Thus, we'll erroneously try to copy the fixmap slots into a PUD under
the PGD entry at index 0. At the point we do so this PGD entry has not
been initialised, and thus we'll try to write a value to a small offset
from physical address 0, causing a number of potential problems.
Fix this be correctly offsetting the PGD. This is split over a few steps
for legibility.
Fixes: 14c127c957 ("arm64: mm: Flip kernel VA space")
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Steve Capper <Steve.Capper@arm.com>
Tested-by: Steve Capper <Steve.Capper@arm.com>
Tested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This patch the removes the recently added mediatek,physpeed property.
Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
See mt7622-bananapi-bpi-r64.dts for a working example.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 2f6ea23f63 ("arm64: KVM: Avoid marking pages as XN in
Stage-2 if CTR_EL0.DIC is set"), KVM has stopped marking normal memory
as execute-never at stage2 when the system supports D->I Coherency at
the PoU. This avoids KVM taking a trap when the page is first executed,
in order to clean it to PoU.
The patch that added this change also wrapped PAGE_S2_DEVICE mappings
up in this too. The upshot is, if your CPU caches support DIC ...
you can execute devices.
Revert the PAGE_S2_DEVICE change so PTE_S2_XN is always used
directly.
Fixes: 2f6ea23f63 ("arm64: KVM: Avoid marking pages as XN in Stage-2 if CTR_EL0.DIC is set")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we have a definition for the 'F' field of PAR_EL1, use that
instead of coding the immediate directly.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Thanks to address translation being performed out of order with respect to
loads and stores, it is possible for a CPU to take a translation fault when
accessing a page that was mapped by a different CPU.
For example, in the case that one CPU maps a page and then sets a flag to
tell another CPU:
CPU 0
-----
MOV X0, <valid pte>
STR X0, [Xptep] // Store new PTE to page table
DSB ISHST
ISB
MOV X1, #1
STR X1, [Xflag] // Set the flag
CPU 1
-----
loop: LDAR X0, [Xflag] // Poll flag with Acquire semantics
CBZ X0, loop
LDR X1, [X2] // Translates using the new PTE
then the final load on CPU 1 can raise a translation fault because the
translation can be performed speculatively before the read of the flag and
marked as "faulting" by the CPU. This isn't quite as bad as it sounds
since, in reality, code such as:
CPU 0 CPU 1
----- -----
spin_lock(&lock); spin_lock(&lock);
*ptr = vmalloc(size); if (*ptr)
spin_unlock(&lock); foo = **ptr;
spin_unlock(&lock);
will not trigger the fault because there is an address dependency on CPU 1
which prevents the speculative translation. However, more exotic code where
the virtual address is known ahead of time, such as:
CPU 0 CPU 1
----- -----
spin_lock(&lock); spin_lock(&lock);
set_fixmap(0, paddr, prot); if (mapped)
mapped = true; foo = *fix_to_virt(0);
spin_unlock(&lock); spin_unlock(&lock);
could fault. This can be avoided by any of:
* Introducing broadcast TLB maintenance on the map path
* Adding a DSB;ISB sequence after checking a flag which indicates
that a virtual address is now mapped
* Handling the spurious fault
Given that we have never observed a problem due to this under Linux and
future revisions of the architecture are being tightened so that
translation table walks are effectively ordered in the same way as explicit
memory accesses, we no longer treat spurious kernel faults as fatal if an
AT instruction indicates that the access does not trigger a translation
fault.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
PAR_EL1 is a mysterious creature, but sometimes it's necessary to read
it when translating addresses in situations where we cannot walk the
page table directly.
Add a couple of system register definitions for the fault indication
field ('F') and the fault status code ('FST').
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Commit 6a4cbd63c25a ("Revert "arm64: Remove unnecessary ISBs from
set_{pte,pmd,pud}"") reintroduced ISB instructions to some of our
page table setter functions in light of a recent clarification to the
Armv8 architecture. Although 'set_pgd()' isn't currently used to update
a live page table, add the ISB instruction there too for consistency
with the other macros and to provide some future-proofing if we use it
on live tables in the future.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
05f2d2f83b ("arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable")
added a new TLB invalidation helper which is used when freeing
intermediate levels of page table used for kernel mappings, but is
missing the required ISB instruction after completion of the TLBI
instruction.
Add the missing barrier.
Cc: <stable@vger.kernel.org>
Fixes: 05f2d2f83b ("arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit 24fe1b0efa.
Commit 24fe1b0efa ("arm64: Remove unnecessary ISBs from
set_{pte,pmd,pud}") removed ISB instructions immediately following updates
to the page table, on the grounds that they are not required by the
architecture and a DSB alone is sufficient to ensure that subsequent data
accesses use the new translation:
DDI0487E_a, B2-128:
| ... no instruction that appears in program order after the DSB
| instruction can alter any state of the system or perform any part of
| its functionality until the DSB completes other than:
|
| * Being fetched from memory and decoded
| * Reading the general-purpose, SIMD and floating-point,
| Special-purpose, or System registers that are directly or indirectly
| read without causing side-effects.
However, the same document also states the following:
DDI0487E_a, B2-125:
| DMB and DSB instructions affect reads and writes to the memory system
| generated by Load/Store instructions and data or unified cache
| maintenance instructions being executed by the PE. Instruction fetches
| or accesses caused by a hardware translation table access are not
| explicit accesses.
which appears to claim that the DSB alone is insufficient. Unfortunately,
some CPU designers have followed the second clause above, whereas in Linux
we've been relying on the first. This means that our mapping sequence:
MOV X0, <valid pte>
STR X0, [Xptep] // Store new PTE to page table
DSB ISHST
LDR X1, [X2] // Translates using the new PTE
can actually raise a translation fault on the load instruction because the
translation can be performed speculatively before the page table update and
then marked as "faulting" by the CPU. For user PTEs, this is ok because we
can handle the spurious fault, but for kernel PTEs and intermediate table
entries this results in a panic().
Revert the offending commit to reintroduce the missing barriers.
Cc: <stable@vger.kernel.org>
Fixes: 24fe1b0efa ("arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When we fail to bring a secondary CPU online and it fails in an unknown
state, we should assume the worst and increment 'cpus_stuck_in_kernel'
so that things like kexec() are disabled.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Arnd Bergmann