Commit Graph

529 Commits

Author SHA1 Message Date
Nicolas Pitre 4530e4b6a4 ARM: 8032/1: bL_switcher: fix validation check before its activation
The switcher should not depend on MAX_CLUSTER to determine ifit should
be activated or not. In a multiplatform kernel binary it is possible to
have dual-cluster and quad-cluster platforms configured in. In that case
MAX_CLUSTER which is a build time limit should be 4 and that shouldn't
prevent the switcher from working if the kernel is booted on a b.L
dual-cluster system.

In bL_switcher_halve_cpus() we already have a runtime validation check
to make sure we're dealing with only two clusters, so booting on a quad
cluster system will be caught and switcher activation aborted.

However, the b.L switcher must ensure the MCPM layer is initialized on
the booted hardware before doing anything.  The mcpm_is_available()
function is added to that effect.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Abhilash Kesavan <kesavan.abhilash@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22 22:23:59 +01:00
Linus Torvalds cbda94e039 ARM: SoC: driver changes
These changes are mostly for ARM specific device drivers that either
 don't have an upstream maintainer, or that had the maintainer ask
 us to pick up the changes to avoid conflicts. A large chunk of this
 are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from
 that, reset controllers for STi as well as a large rework of the
 Marvell Orion/EBU watchdog driver are notable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/1+GCrR//JCVInAQJmfg/9GyqHatDjjUPUBjUQRIEtKgGdmQwdbDqF
 x+OrS/q5B5zYbpIWkbkt1IUYJfU+89Z5ev9jxI4rV824Nu9Y92mHPDnv+N/ptkIh
 q2OVP3bQDpWs3aEVV2B1HBNcWrNUuwco9BJu05eegEePii/cto0/wKwWIgUmrmjy
 xOLthsnp2YmeplGs7ctC6Dz8XbmELebpawejTGylARXei/SwmzB/YYDgJbYjRL2I
 WSCVa8Vo+MZaGC/yxdKVTtvsKVQenxGoMO3ojikJeRdvuVRJds48Cw+UBdzWYNeJ
 3Ssvbdx6Xltf9jy/7H0btOUgxPetZuUV+2XpbWfGu0Zr9FcGDv3q9hrxA+UYKnkY
 GIGU0otSsmpHnX5Ms3E2xnHiV/fihxA3qohqts5kYRBDr5uc+IpW6SbDymQliCGG
 OO4XmIVM3pmsqAqP3Zuseemt9CeSW2yC0XlfXkzjO74yY39c+WLBbtGI40Z5W6i0
 mM1C8RD3QSNijYCEC8eqz06BQfRImsPs+jllsnJTZaHfbOsib718uvandjfG26lN
 616YMcqq0Sp51HIQ4qW7f2dQr7vOyNqbukdkrwF5JgkY/nVki5kdciRg/yeipRy6
 Ey80a+OTq0GQljM0F2dcH/A1eHH9KsuI1L6NdSMJsl0h6guIBORPTwTw3qJ13OkR
 wpJyM+Gm+Fk=
 =u/FI
 -----END PGP SIGNATURE-----

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
2014-04-05 15:37:40 -07:00
Russell King 95959e6a06 Merge branches 'amba', 'fixes', 'misc', 'mmci', 'unstable/omap-dma' and 'unstable/sa11x0' into for-next 2014-04-04 00:33:32 +01:00
Alexander Shiyan 1ef2bf8227 ARM: 8006/1: Remove redundant code
Statements following return will never be executed.
This patch removes this code.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-19 20:19:01 +00:00
Dave Martin ea36d2ab1a ARM: 7962/2: Make all mcpm functions notrace
The functions in mcpm_entry.c are mostly intended for use during
scary cache and coherency disabling sequences, or do other things
which confuse trace ... like powering a CPU down and not
returning. Similarly for the backend code.

For simplicity, this patch just makes whole files notrace.
There should be more than enough traceable points on the paths to
these functions, but we can be more fine-grained later if there is
a need for it.

Jon Medhurst:
Also added spc.o to the list of files as it contains functions used by
MCPM code which have comments comments like: "might be used in code
paths where normal cacheable locks are not working"

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18 19:39:33 +00:00
Linus Walleij 9cf3138059 ARM: SP804: make Integrator/CP timer pick clock from DT
This modifies the SP804 driver so that the clock will be taken
from the device tree node for the timer.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-13 11:20:36 +01:00
Linus Torvalds dfd10e7ae6 ARM: SoC platform changes for 3.14
New core SoC-specific changes.
 
 New platforms:
 * Introduction of a vendor, Hisilicon, and one of their SoCs with some
   random numerical product name.
 * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU).
 * Marvell Berlin series of SoCs, which include the one in Chromecast.
 * MOXA platform support, ARM9-based platform used mostly in industrial products
 * Support for Freescale's i.MX50 SoC.
 
 Other work:
 * Renesas work for new platforms and drivers, and conversion over to
   more multiplatform-friendly device registration schemes.
 * SMP support for Allwinner sunxi platforms.
 * ... plus a bunch of other stuff across various platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4VggAAoJEIwa5zzehBx3YkEP/j/Vp83zPcPijb8CNLUGJ9rK
 RTOW9hlLbwCGAcIi/32XVjup1ylTzQuwKpH2R6Sf2GRcmXI1HbCCyDSGKWq+eK9C
 vDRoWiU9DVRmXuaC7R1dscLS1qSobVoI80bOstblZW65799z48IllD7rJA1BzDIg
 vUy4knY9hO39DK7sJymXTBJepWxXJHMaYmr15xuxbaR3Qsp8zisqyzMwLqVfBwFB
 FyPr2PfxU8HJOoWhIsVo+679pmb9tHD6our0HG/lHSuPcRO/3UwN+VD87SwfpjNx
 P7qiRFkIoMooiTRmjwPPNbMZBJHl6vBR1RWHmws5s9aay1DDhdvQURxKx4bNaN/A
 UzwiestopISLChd9jqjxTbngl1mvLaL9JwBjRVAkXG4vJJFrhwqvmcMrlszA3ueR
 2Th/NBk0b2s8ncAuT7bFe4i/H7es8aI/D2weF3FxRGgpan/B0T0UDAKO+rrMYZ0q
 1ZoqlgMQZ0o1l7B5v90h0QQo/GMmin1xzyAChmsl8xbOHh5YfWVFGwLzVbYeZ/YJ
 yf3CcgQjAA8UV3f1J3nZeqM84o8qqtKUmUjsqWIgT2DnxOoM3pGckrmQ4OvhLccd
 etROW2nr8EqmoL7shheeHPANoDsTT1XSs0xbWo4ZBpGW5rTIFVoLEGyqa48tw5qA
 pkH1KwpwEXTrw6MXP5L1
 =pgLW
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New core SoC-specific changes.

  New platforms:
   * Introduction of a vendor, Hisilicon, and one of their SoCs with
     some random numerical product name.
   * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
     i.e. !MMU).
   * Marvell Berlin series of SoCs, which include the one in Chromecast.
   * MOXA platform support, ARM9-based platform used mostly in
     industrial products
   * Support for Freescale's i.MX50 SoC.

  Other work:
   * Renesas work for new platforms and drivers, and conversion over to
     more multiplatform-friendly device registration schemes.
   * SMP support for Allwinner sunxi platforms.
   * ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
  ARM: tegra: fix tegra_powergate_sequence_power_up() inline
  ARM: msm_defconfig: Update for multi-platform
  ARM: msm: Move MSM's DT based hardware to multi-platform support
  ARM: msm: Only build timer.c if required
  ARM: msm: Only build clock.c on proc_comm based platforms
  ARM: ux500: Enable system suspend with WFI support
  ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
  ARM: shmobile: r8a7790: Fix I2C controller names
  ARM: msm: Simplify ARCH_MSM_DT config
  ARM: msm: Add support for MSM8974 SoC
  ARM: sunxi: select ARM_PSCI
  MAINTAINERS: Update Allwinner sunXi maintainer files
  ARM: sunxi: Select RESET_CONTROLLER
  ARM: imx: improve the comment of CCM lpm SW workaround
  ARM: imx: improve status check of clock gate
  ARM: imx: add necessary interface for pfd
  ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
  ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
  ARM: imx: Add cpu frequency scaling support
  ARM i.MX35: Add devicetree support.
  ...
2014-01-23 18:40:49 -08:00
Linus Torvalds f341535193 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "In this set, we have:
   - Refactoring of some of the old StrongARM-1100 GPIO code to make
     things simpler by Dmitry Eremin-Solenikov
   - Read-only and non-executable support for modules on ARM from Laura
     Abbot
   - Removal of unnecessary set_drvdata() calls in AMBA code
   - Some non-executable support for kernel lowmem mappings at the 1MB
     section granularity, and dumping of kernel page tables via debugfs
   - Some improvements for the timer/clock code on Footbridge platforms,
     and cleanup some of the LED code there
   - Fix fls/ffs() signatures to match x86 to prevent build warnings,
     particularly where these are used with min/max() macros
   - Avoid using the bootmem allocator on ARM (patches from Santosh
     Shilimkar)
   - Various asid/unaligned access updates from Will Deacon"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (51 commits)
  ARM: SMP implementations are not supposed to return from smp_ops.cpu_die()
  ARM: ignore memory below PHYS_OFFSET
  Fix select-induced Kconfig warning for ZBOOT_ROM
  ARM: fix ffs/fls implementations to match x86
  ARM: 7935/1: sa1100: collie: add gpio-keys configuration
  ARM: 7932/1: bcm: Add DEBUG_LL console support
  ARM: 7929/1: Remove duplicate SCHED_HRTICK config option
  ARM: 7928/1: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU
  ARM: 7927/1: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs
  ARM: 7926/1: mm: flesh out and fix the comments in the ASID allocator
  ARM: 7925/1: mm: keep track of last ASID allocation to improve bitmap searching
  ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE
  ARM: PCI: add legacy IDE IRQ implementation
  ARM: footbridge: cleanup LEDs code
  ARM: pgd allocation: retry on failure
  ARM: footbridge: add one-shot mode for DC21285 timer
  ARM: footbridge: add sched_clock implementation
  ARM: 7922/1: l2x0: add Marvell Tauros3 support
  ARM: 7877/1: use built-in byte swap function
  ARM: 7921/1: mcpm: remove redundant dsb instructions prior to sev
  ...
2014-01-23 18:34:03 -08:00
Will Deacon 03aa6580e3 ARM: 7921/1: mcpm: remove redundant dsb instructions prior to sev
sync_cache_w already includes a dsb, so we can just use sev() directly
then following a cache-sync.

Acked-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-29 12:32:44 +00:00
Nicolas Pitre efcfc46e8a ARM: 7918/1: clean up cache handling in core code
We have a handy macro to replace open coded __cpuc_flush_dcache_area(()
and outer_clean_range() sequences. Let's use it. No functional change.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-29 12:32:38 +00:00
Yijing Wang 9202174047 arm/PCI: Use dev_is_pci() to identify PCI devices
Use dev_is_pci() instead of checking bus type directly.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-11 16:53:18 -07:00
Kevin Hilman b8969ef5cf Merge branch 'soc/sched_clock' into next/soc
From Stephen Boyd:
* soc/sched_clock:
  ARM: versatile: Switch to sched_clock_register()
  ARM: orion: Switch to sched_clock_register()
  ARM: OMAP: Switch to sched_clock_register()
  ARM: iop: Switch to sched_clock_register()
  ARM: u300: Switch to sched_clock_register()
  ARM: sa1100: Switch to sched_clock_register()
  ARM: pxa: Switch to sched_clock_register()
  ARM: OMAP2+: Switch to sched_clock_register()
  ARM: OMAP1: Switch to sched_clock_register()
  ARM: msm: Switch to sched_clock_register()
  ARM: mmp: Switch to sched_clock_register()
  ARM: IXP4xx: Switch to sched_clock_register()
  ARM: integrator: Switch to sched_clock_register()
  ARM: imx: Switch to sched_clock_register()
  ARM: davinci: Switch to sched_clock_register()
  ARM: clps711x: Switch to sched_clock_register()
  ARM: timer-sp: Switch to sched_clock_register()

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-06 08:05:55 -08:00
Stephen Boyd 9b12f3a86a ARM: timer-sp: Switch to sched_clock_register()
The 32 bit sched_clock interface now supports 64 bits. Upgrade to
the 64 bit function to allow us to remove the 32 bit registration
interface. Also mark the read function notrace since we're here
and failure to do so would cause ftrace to break.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-11-21 15:40:59 -08:00
Linus Torvalds e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
Linus Torvalds f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00
Russell King df762eccba Merge branch 'devel-stable' into for-next
Conflicts:
	arch/arm/include/asm/atomic.h
	arch/arm/include/asm/hardirq.h
	arch/arm/kernel/smp.c
2013-11-12 10:58:59 +00:00
Linus Torvalds 21604cdcdc ARM: SoC cleanups for 3.13
This branch contains code cleanups, moves and removals for 3.13.
 
 Qualcomm msm targets had a bunch of code removal for legacy non-DT
 platforms. Nomadik saw more device tree conversions and cleanup of old
 code. Tegra has some code refactoring, etc.
 
 One longish patch series from Sebastian Hasselbarth changes the init_time
 hooks and tries to use a generic implementation for most platforms,
 since they were all doing more or less the same things.
 
 Finally the "shark" platform is removed in this release. It's been
 abandoned for a while and nobody seems to care enough to keep it
 around. If someone comes along and wants to resurrect it, the removal
 can easily be reverted and code brought back.
 
 Beyond this, mostly a bunch of removals of stale content across the
 board, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgBqdAAoJEIwa5zzehBx3cIEP/0L8ayPZV/fFpF3VheP7nyq9
 nanUc74GVHu71rhiACsfqsP9QGQT6Ye+RNvD8gVcmmqW+7TjWG19nwgjO+GbJmIF
 Sr5jNaSLy2yeMHd6aEOTYtpQ/kUdFePvEVMVJG4nx8vVa0sxk7YCIsHFNQTV4Wgv
 FOnJ2jx3RvM6ing5SfmglB3ai7dwYxKKCZvzLqzn2vs0W+Fw0jXv/OEjbdd+WAfK
 K94lFIqQXcxyDeF2NTVtlFT/F+LKbiRP88kM2ZkJkz5RHcSXgJNmJmVDCHwGxH08
 ri9QOX6stHT6gNFl/B5ckpzg5PbuzkEnlg1GXWn7fnx7OoBKekx8SKoP0+sjkpxF
 kX5pfERdBHUju1mfHDkxfdPAQ4RFDVcYDwNoTC1zBhDSfMuFsTGGNdeR0dhGQnmA
 Vzc8RfIRzFhGEuXDktz7cZIpOuq7OI62jt6qDLqWSWSOa9ZfqsOMdCcA3QTV3rTi
 nHiOQBTM0Bl78SrXzE0PmcD4obCnBvJqthSF5Z09N/POBtz8i4GsF7k4S1rr/rvX
 HA/wp9Lzt4hvCoj1gwEGLqUnSiey1b7a3rqn03mNQvX7NW9StIg1VCauQZBR1KwP
 Xtxgt48QgjQ7wzh4RGs2FdAgW4cw9nEbUTVRBLkQ7jxW+zh5CRJlS5dprBMR7Ier
 7necO/DWPLnhaSAj4eXB
 =SHZQ
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This branch contains code cleanups, moves and removals for 3.13.

  Qualcomm msm targets had a bunch of code removal for legacy non-DT
  platforms.  Nomadik saw more device tree conversions and cleanup of
  old code.  Tegra has some code refactoring, etc.

  One longish patch series from Sebastian Hasselbarth changes the
  init_time hooks and tries to use a generic implementation for most
  platforms, since they were all doing more or less the same things.

  Finally the "shark" platform is removed in this release.  It's been
  abandoned for a while and nobody seems to care enough to keep it
  around.  If someone comes along and wants to resurrect it, the removal
  can easily be reverted and code brought back.

  Beyond this, mostly a bunch of removals of stale content across the
  board, etc"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (79 commits)
  ARM: gemini: convert to GENERIC_CLOCKEVENTS
  ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  MAINTAINERS: Add patterns for DTS files for AT91
  ARM: at91: remove init_machine() as default is suitable
  ARM: at91/dt: split sama5d3 peripheral definitions
  ARM: at91/dt: split sam9x5 peripheral definitions
  ARM: Remove temporary sched_clock.h header
  ARM: clps711x: Use linux/sched_clock.h
  MAINTAINERS: Add DTS files to patterns for Samsung platform
  ARM: EXYNOS: remove unnecessary header inclusions from exynos4/5 dt machine file
  ARM: tegra: fix ARCH_TEGRA_114_SOC select sort order
  clk: nomadik: fix missing __init on nomadik_src_init
  ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  ARM: S3C64XX: Kill CONFIG_PLAT_S3C64XX
  ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64XX support
  ...
2013-11-11 16:42:43 +09:00
Tushar Behera b0ced9d220 ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
Commit 6dedcca610 ("hotplug, powerpc, x86: Remove
cpu_hotplug_driver_lock())" removes the the definition of
cpu_hotplug_driver_{lock,unlock} APIs, thereby causing a build error.

Replace these calls with {lock,unlock}_device_hotplug().

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-11-07 00:14:14 +00:00
Vinod Koul f8d9f628e1 Merge branch 'dma_complete' into next 2013-10-31 22:36:01 +05:30
Russell King 2098990e7c Merge branch 'baserock/bjdooks/312-rc4/be/core-v3' of git://git.baserock.org/delta/linux into devel-stable
Conflicts:
	arch/arm/kernel/head.S

This series has been well tested and it would be great to get this
merged now.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-30 22:20:26 +00:00
Vinod Koul db60d8da8f dmanengine: fix edma driver to not define DMA_COMPLETE
edma header defines DMA_COMPLETE, this causes issues as commit adfedd9a32 move
DMA_SUCCESS to DMA_COMPLETE. edma should properly namespace its defines and
needs a future fix

Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-30 18:27:56 +05:30
Dave Martin 0de0d64675 ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
CPU hotplug and kexec rely on smp_ops.cpu_kill(), which is supposed
to wait for the CPU to park or power down, and perform the last
rites (such as disabling clocks etc., where the platform doesn't do
this automatically).

kexec in particular is unsafe without performing this
synchronisation to park secondaries.  Without it, the secondaries
might not be parked when kexec trashes the kernel.

There is no generic way to do this synchronisation, so a new mcpm
platform_ops method power_down_finish() is added by this patch.

The new method is mandatory.  A platform which provides no way to
detect when CPUs are parked is likely broken.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-29 11:07:15 +00:00
Dave Martin 1e5660999a ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
This patch factors the logical-to-physical CPU translation out of
mcpm_boot_secondary(), so that it can be reused elsewhere.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-29 11:06:34 +00:00
Michael Opdenacker 728fae6f6f ARM: 7856/1: timer-sp: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-29 11:06:17 +00:00
Olof Johansson 43d93947a5 Via Paul Walmsley <paul@pwsan.com>:
Move some of the OMAP2+ CM and System Control Module direct
 register accesses into CM- and System Control
 Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
 is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
 drivers/.
 
 Basic test logs are available here:
 
 http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSZAZXAAoJEBvUPslcq6VzCWQQAKH4Rj0izwbbLkgBAeeaQz5K
 oJgPJ6UPLOJ2uLIUauCKUSR6+nktrCTfV8P+J4DhCc6OiGrKBXJhSETPgaTbWsNw
 Bd577pmuvXSfNFXUaLwCgkSmafJ1pi6d7kEx/7ZW3TziVE/aUxyeHkrMtWJHrjTP
 28tJVieOxLlO5iK06DfmGcCpLUBKJKtgGRo0h/oqMhLAaN5S8//lyVYgdsto7oCN
 /bes6OpuVVdKiSr78V4rCVtR5Lij5+lVrT8HDiw2BA0V3bYcI7+CVlWBPZ3mYkuy
 oAJDcn9whNyfWS+SsaTIjy6nHsgQkhEJnhrQW3k2skVZobRtWDv7U5LiTjsUhb3o
 pjyWD8zZ7jqrkgyLsai6dm1zsljMQXsIQwH5h++HdCRhtNOXd6bVQZy0KqkpLu0y
 Bhpt8/edh4Bdc305oB05/Y9Uxr7Gr8M377chVZx+JD3rxIDjRRyOJcRIhd27WZEf
 HSMLpO/ayUXWdDuTlKW0IEnImx3PrxT913cnjIY589FhfdahfGQoft4sWDeiQLAX
 +zVYZljeY+GxbUWO6aY4m2PfVN9p/Hwal58NZZgj59wq9iHUuJErK11X7rj+2vwN
 +20IS8sikz6Iym84iC0T+omUeFVY0Zo004DVvpPB+D1C2LpwdI1c6kTz4DYT1EBP
 pvs8Wihkk7xQxQn0rBGP
 =L37r
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:

Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/

* tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  + Linux 3.12-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-28 14:39:03 -07:00
Victor Kamensky 519ceb9fd1 ARM: mcpm: fix big endian issue in mcpm startup code
In big endian mode mcpm_entry_point is first function
that called on secondaries CPU. First it should switch
CPU into big endian code.

[ben.dooks@codethink.co.uk: merge fix patch from Victor into this]
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-10-19 20:46:36 +01:00
Linus Torvalds d6099aeb4a Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "Some more ARM fixes, nothing particularly major here.  The biggest
  change is to fix the SMP_ON_UP code so that it works with TI's Aegis
  cores"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7851/1: check for number of arguments in syscall_get/set_arguments()
  ARM: 7846/1: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  ARM: 7845/1: sharpsl_param.c: fix invalid memory access for pxa devices
  ARM: 7843/1: drop asm/types.h from generic-y
  ARM: 7842/1: MCPM: don't explode if invoked without being initialized first
2013-10-14 10:02:23 -07:00
Andrea Adami 856337283a ARM: 7845/1: sharpsl_param.c: fix invalid memory access for pxa devices
This fixes a regression for kernels after v3.2

After commit 72662e0108
ARM: head.S: only include __turn_mmu_on in the initial identity mapping

Zaurus PXA devices call sharpsl_save_param() during fixup and hang on
boot because memcpy refers to physical addresses no longer valid if the
MMU is setup.
Zaurus collie (SA1100) is unaffected (function is called in init_machine).

The code was making assumptions and for PXA the virtual address
should have been used before.

Signed-off-by: Marko Katic <dromede@gmail.com>
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-03 10:39:43 +01:00
Nicolas Pitre d0cdef6e87 ARM: 7842/1: MCPM: don't explode if invoked without being initialized first
Currently mcpm_cpu_power_down() and mcpm_cpu_suspend() trigger BUG()
if mcpm_platform_register() is not called beforehand.  This may occur
for many reasons such as some incomplete device tree passed to the kernel
or the like.

Let's be nicer to users and avoid killing the kernel if that happens by
logging a warning and returning to the caller.  The mcpm_cpu_suspend()
user is already set to deal with this situation, and so is cpu_die()
invoking mcpm_cpu_die().

The problematic case would have been the B.L switcher's usage of
mcpm_cpu_power_down(), however it has to call mcpm_cpu_power_up() first
which is already set to catch an error resulting from a missing
mcpm_platform_register() call.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-03 10:36:37 +01:00
Joel Fernandes 6cdaca481f ARM: edma: Fix clearing of unused list for DT DMA resources
HWMOD removal for MMC is breaking edma_start as the events are being manually
triggered due to unused channel list not being clear.

The above issue is fixed by reading the "dmas" property from the DT node if it
exists and clearing the bits in the unused channel list if the dma controller
used by any device is EDMA. For this purpose we use the of_* helpers to parse
the arguments in the dmas phandle list.

Also introduced is a minor clean up of a checkpatch error in old code.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reported-by: Balaji T K <balajitk@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Nishanth Menon <nm@ti.com>
Cc: Pantel Antoniou <panto@antoniou-consulting.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30 09:30:13 -07:00
Dave Martin d08e2e0904 ARM: bL_switcher: Add query interface to discover CPU affinities
When the switcher is active, there is no straightforward way to
figure out which logical CPU a given physical CPU maps to.

This patch provides a function
bL_switcher_get_logical_index(mpidr), which is analogous to
get_logical_index().

This function returns the logical CPU on which the specified
physical CPU is grouped (or -EINVAL if unknown).
If the switcher is inactive or not present, -EUNATCH is returned instead.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:47:31 -04:00
Dave Martin 29064b8846 ARM: bL_switcher/trace: Add kernel trace trigger interface
This patch exports a bL_switcher_trace_trigger() function to
provide a means for drivers using the trace events to get the
current status when starting a trace session.

Calling this function is equivalent to pinging the trace_trigger
file in sysfs.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
2013-09-23 18:47:31 -04:00
Dave Martin b09bbe5b12 ARM: bL_switcher/trace: Add trace trigger for trace bootstrapping
When tracing switching, an external tracer needs a way to bootstrap
its knowledge of the logical<->physical CPU mapping.

This patch adds a sysfs attribute trace_trigger.  A write to this
attribute will generate a power:cpu_migrate_current event for each
online CPU, indicating the current physical CPU for each logical
CPU.

Activating or deactivating the switcher also generates these
events, so that the tracer knows about the resulting remapping of
affected CPUs.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
2013-09-23 18:47:30 -04:00
Dave Martin 1bfbddb6f3 ARM: bL_switcher: Basic trace events support
This patch adds simple trace events to the b.L switcher code
to allow tracing of CPU migration events.

To make use of the trace events, you will need:

CONFIG_FTRACE=y
CONFIG_ENABLE_DEFAULT_TRACERS=y

The following events are added:
  * power:cpu_migrate_begin
  * power:cpu_migrate_finish

each with the following data:
    u64     timestamp;
    u32     cpu_hwid;

power:cpu_migrate_begin occurs immediately before the
switcher-specific migration operations start.
power:cpu_migrate_finish occurs immediately when migration is
completed.

The cpu_hwid field contains the ID fields of the MPIDR.

* For power:cpu_migrate_begin, cpu_hwid is the ID of the outbound
  physical CPU (equivalent to (from_phys_cpu,from_phys_cluster)).

* For power:cpu_migrate_finish, cpu_hwid is the ID of the inbound
  physical CPU (equivalent to (to_phys_cpu,to_phys_cluster)).

By design, the cpu_hwid field is masked in the same way as the
device tree cpu node reg property, allowing direct correlation to
the DT description of the hardware.

The timestamp is added in order to minimise timing noise.  An
accurate system-wide clock should be used for generating this
(hopefully getnstimeofday is appropriate, but it could be changed).
It could be any monotonic shared clock, since the aim is to allow
accurate deltas to be computed.  We don't necessarily care about
accurate synchronisation with wall clock time.

In practice, each switch takes place on a single logical CPU,
and the trace infrastructure should guarantee that events are
well-ordered with respect to a single logical CPU.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:47:29 -04:00
Nicolas Pitre 6137eba6c2 ARM: bL_switcher: wait until inbound is alive before performing a switch
In some cases, a significant delay may be observed between the moment
a request for a CPU to come up is made and the moment it is ready to
start executing kernel code.  This is especially true when a whole
cluster has to be powered up which may take in the order of miliseconds.
It is therefore a good idea to let the outbound CPU continue to execute
code in the mean time, and be notified when the inbound is ready before
performing the actual switch.

This is achieved by registering a completion block with the appropriate
IPI callback, and programming the sending of an IPI by the early assembly
code prior to entering the main kernel code.  Once the IPI is delivered
to the outbound CPU, the completion block is "completed" and the switcher
thread is resumed.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:47:29 -04:00
Nicolas Pitre de885d147a ARM: mcpm: add a simple poke mechanism to the early entry code
This allows to poke a predetermined value into a specific address
upon entering the early boot code in bL_head.S.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:47:27 -04:00
Nicolas Pitre 108a9640ab ARM: bL_switcher: synchronize the outbound with the inbound
Let's wait for the inbound CPU to come up and snoop some of the outbound
CPU cache before bringing the outbound CPU down.  That should be more
efficient than going down right away.

Possible improvements might involve some monitoring of the CCI event
counters.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:39:56 -04:00
Dave Martin 0577fee283 ARM: bL_switcher: Add switch completion callback for bL_switch_request()
There is no explicit way to know when a switch started via
bL_switch_request() is complete.  This can lead to unpredictable
behaviour when the switcher is controlled by a subsystem which
makes dynamic decisions (such as cpufreq).

The CPU PM notifier is not really suitable for signalling
completion, because the CPU could get suspended and resumed for
other, independent reasons while a switch request is in flight.
Adding a whole new notifier for this seems excessive, and may tempt
people to put heavyweight code on this path.

This patch implements a new bL_switch_request_cb() function that
allows for a per-request lightweight callback, private between the
switcher and the caller of bL_switch_request_cb().

Overlapping switches on a single CPU are considered incorrect if
they are requested via bL_switch_request_cb() with a callback (they
will lead to an unpredictable final state without explicit external
synchronisation to force the requests into a particular order).
Queuing requests robustly would be overkill because only one
subsystem should be attempting to control the switcher at any time.

Overlapping requests of this kind will be failed with -EBUSY to
indicate that the second request won't take effect and the
completer will never be called for it.

bL_switch_request() is retained as a wrapper round the new function,
with the old, fire-and-forget semantics.  In this case the last request
will always win. The request may still be denied if a previous request
with a completer is still pending.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2013-09-23 18:39:19 -04:00
Dave Martin 491990e29f ARM: bL_switcher: Add runtime control notifier
Some subsystems will need to respond synchronously to runtime
enabling and disabling of the switcher.

This patch adds a dedicated notifier interface to support such
subsystems.  Pre- and post- enable/disable notifications are sent
to registered callbacks, allowing safe transition of non-b.L-
transparent subsystems across these control transitions.

Notifier callbacks may veto switcher (de)activation on pre notifications
only.  Post notifications won't revert the action.

If enabling or disabling of the switcher fails after the pre-change
notification has been sent, subsystems which have registered
notifiers can be left in an inappropriate state.

This patch sends a suitable post-change notification on failure,
indicating that the old state has been reestablished.

For example, a failed initialisation will result in the following
sequence:

    BL_NOTIFY_PRE_ENABLE
    /* switcher initialisation fails */
    BL_NOTIFY_POST_DISABLE

It is the responsibility of notified subsystems to respond in an
appropriate way.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:39:06 -04:00
Dave Martin c0f4375146 ARM: bL_switcher: Add synchronous enable/disable interface
Some subsystems will need to know for sure whether the switcher is
enabled or disabled during certain critical regions.

This patch provides a simple mutex-based mechanism to discover
whether the switcher is enabled and temporarily lock out further
enable/disable:

  * bL_switcher_get_enabled() returns true iff the switcher is
    enabled and temporarily inhibits enable/disable.

  * bL_switcher_put_enabled() permits enable/disable of the switcher
    again after a previous call to bL_switcher_get_enabled().

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-09-23 18:38:54 -04:00
Russell King 7f63037c8f Merge branch 'iks_for_rmk' of git://git.linaro.org/people/nico/linux into devel-stable
Nicolas Pitre writes:

This is the first part of the patch series adding IKS (In-Kernel
Switcher) support for big.LITTLE system architectures.  This consists of
the core patches only.  Extra patches to come later will introduce
various optimizations and tracing support.

Those patches were posted on the list a while ago here:

   http://news.gmane.org/group/gmane.linux.ports.arm.kernel/thread=253942
2013-09-17 15:14:07 +01:00
Linus Walleij 136dfa5eda ARM: delete mach-shark
The Shark machine sub-architecture (also known as DNARD, the
DIGITAL Network Appliance Reference Design) lacks a maintainer
able to apply and test patches to modernize the architecture.

It is suspected that the current kernel, while it compiles,
does not even boot on this machine. The listed maintainer has
expressed that he will not be able to spend any time on the
maintenance for the coming year.

So let's delete it from the kernel for now. It can always be
resurrected with git revert if maintenance is resumed.

As the VIA82c505 PCI adapter was only used by this
architecture, that gets deleted too.

Cc: arm@kernel.org
Cc: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17 12:34:36 +02:00
Linus Torvalds a4ae54f90e Merge branch 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer code update from Thomas Gleixner:
 - armada SoC clocksource overhaul with a trivial merge conflict
 - Minor improvements to various SoC clocksource drivers

* 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding
  clocksource: armada-370-xp: Get reference fixed-clock by name
  clocksource: armada-370-xp: Replace WARN_ON with BUG_ON
  clocksource: armada-370-xp: Fix device-tree binding
  clocksource: armada-370-xp: Introduce new compatibles
  clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE
  clocksource: armada-370-xp: Simplify TIMER_CTRL register access
  clocksource: armada-370-xp: Use BIT()
  ARM: timer-sp: Set dynamic irq affinity
  ARM: nomadik: add dynamic irq flag to the timer
  clocksource: sh_cmt: 32-bit control register support
  clocksource: em_sti: Convert to devm_* managed helpers
2013-09-16 16:10:26 -04:00
Linus Torvalds ec5b103ecf Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
 "This pull brings:
   - Andy's DW driver updates
   - Guennadi's sh driver updates
   - Pl08x driver fixes from Tomasz & Alban
   - Improvements to mmp_pdma by Daniel
   - TI EDMA fixes by Joel
   - New drivers:
     - Hisilicon k3dma driver
     - Renesas rcar dma driver
  - New API for publishing slave driver capablities
  - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
  dma: edma: Remove limits on number of slots
  dma: edma: Leave linked to Null slot instead of DUMMY slot
  dma: edma: Find missed events and issue them
  ARM: edma: Add function to manually trigger an EDMA channel
  dma: edma: Write out and handle MAX_NR_SG at a given time
  dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  dmaengine: pl330: use dma_set_max_seg_size to set the sg limit
  dmaengine: dma_slave_caps: remove sg entries
  dma: replace devm_request_and_ioremap by devm_ioremap_resource
  dma: ste_dma40: Fix potential null pointer dereference
  dma: ste_dma40: Remove duplicate const
  dma: imx-dma: Remove redundant NULL check
  dma: dmagengine: fix function names in comments
  dma: add driver for R-Car HPB-DMAC
  dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()
  dma: imx-sdma: Staticize sdma_driver_data structures
  pch_dma: Add MODULE_DEVICE_TABLE
  dmaengine: PL08x: Add cyclic transfer support
  dmaengine: PL08x: Fix reading the byte count in cctl
  dmaengine: PL08x: Add support for different maximum transfer size
  ...
2013-09-10 13:37:36 -07:00
Joel Fernandes 96874b9a24 ARM: edma: Add function to manually trigger an EDMA channel
Manual trigger for events missed as a result of splitting a
scatter gather list and DMA'ing it in batches. Add a helper
function to trigger a channel incase any such events are missed.

Signed-off-by: Joel Fernandes <joelf@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-04 18:38:46 +05:30
Viresh Kumar 887708f0ac ARM: timer-sp: Set dynamic irq affinity
When a cpu goes to a deep idle state where its local timer is shutdown, it
notifies the time frame work to use the broadcast timer instead.

Unfortunately, the broadcast device could wake up any CPU, including an idle one
which is not concerned by the wake up at all.

This implies, in the worst case, an idle CPU will wake up to send an IPI to
another idle cpu.

This patch fixes this for ARM platforms using timer-sp, by setting
CLOCK_EVT_FEAT_DYNIRQ feature.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-08-22 00:18:53 +02:00
Will Deacon 40a5c0b415 ARM: mcpm: use -st dsb option prior to sev instructions
In a similar manner to our spinlock implementation, mcpm uses sev to
wake up cores waiting on a lock when the lock is unlocked. In order to
ensure that the final write unlocking the lock is visible, a dsb
instruction is executed immediately prior to the sev.

This patch changes these dsbs to use the -st option, since we only
require that the store unlocking the lock is made visible.

Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-08-12 12:25:45 +01:00
Nicolas Pitre b22537c682 ARM: bL_switcher: add a simple /dev user interface for debugging purposes
Only the basic call to aid debugging.

*** NOT FOR PRODUCTION ***

Usage:

	echo <cpuid>,<clusterid> > /dev/b.L_switcher

where <cpuid> is the logical CPU number, and <clusterid> is 0 for the
first cluster and 1 for the second cluster.

Signed-off-by: nicolas Pitre <nico@linaro.org>
2013-08-05 00:13:00 -04:00
Nicolas Pitre 2726143514 ARM: bL_switcher: filter CPU hotplug requests when the switcher is active
Trying to support both the switcher and CPU hotplug at the same time
is tricky due to ambiguous semantics.  So let's at least prevent users
from messing around with those logical CPUs the switcher has removed
and those which were not active when the switcher was activated.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-08-05 00:12:41 -04:00
Nicolas Pitre 38c35d4f2e ARM: bL_switcher: remove assumptions between logical and physical CPUs
Up to now, the logical CPU was somehow tied to the physical CPU number
within a cluster.  This causes problems when forcing the boot CPU to be
different from the first enumerated CPU in the device tree creating a
discrepancy between logical and physical CPU numbers.

Let's make the pairing completely independent from physical CPU numbers.

Let's keep only those logical CPUs with same initial CPU cluster to create
a uniform scheduler profile without having to modify any of the probed
topology and compute capacity data.  This has the potential to create
a non contiguous CPU numbering space when the switcher is active with
potential impact on buggy user space tools.  It is however better to fix
those tools rather than making the switcher code more intrusive.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2013-08-04 15:29:13 -04:00