ida instances allocate some internal memory for ->free_bitmap
in addition to the base 'struct ida'. Use ida_destroy() to release
that memory at module_exit().
Fixes: 4b45efe852 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Intel Elkhart Lake has the same LPSS than Intel Broxton.
Add the new IDs to the list of supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
<asm/olpc.h> provides machine_is_olpc() stub for CONFIG_OLPC=n,
compiler should just optimize the unneeded bits away.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
With this patch, the cros_ec_ctl driver will register the legacy
accelerometer driver (named cros_ec_accel_legacy) if it fails to
register sensors through the usual path cros_ec_sensors_register().
This legacy device is present on Chromebook devices with older EC
firmware only supporting deprecated EC commands:
- Glimmer based devices [Intel SOC using LPC transport]
- Veyron minnie devices [ARM SOC using SPI transport]
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
RK805 has SLEEP signal, which can put the device into SLEEP or OFF
mode. The default is SLEEP mode.
However, when the kernel performs power-off (actually the ATF) the
device will not go fully off and this will result in higher power
consumption and inability to wake the device with RTC alarm.
The solution is to enable pm_power_off_prepare function, which will
configure SLEEP pin for OFF function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The function pointer pm_power_off may point to function from other
module (PSCI for example). If rk808 is removed, pm_power_off is
overwritten to NULL and the system cannot be powered off.
This patch checks if pm_power_off points to a module function.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
System Companion Processor (SCP) is Cortex M4 co-processor on some
MediaTek platform that can run EC-style firmware. Since a SCP and EC
would both exist on a system, and use the cros_ec_dev driver, we need to
differentiate between them for the userspace, or they would both be
registered at /dev/cros_ec, causing a conflict.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds all the core support and defines for the Cirrus
Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs.
Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds all the core support and defines for the Cirrus
Logic CS47L15 smart audio CODEC.
Registers or fields are named MADERA_* if it is part of the
common hardware platform and does not conflict with any other
Madera codecs. It is named CS47L15_* if it is unique to CS47L15
and conflicts with definitions on other codecs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently we are relying on the exact match of the regulator name to
find MICVDD, we should add an explicit supply mapping to allow this to
be found more reliably.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
regmap_read won't set val to anything if an ACKed bus fails.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When the driver is used with a subdevice that is disabled in the
kernel configuration, clang gets a little confused about the
control flow and fails to notice that n_subdevs is only
uninitialized when subdevs is NULL, and we check for that,
leading to a false-positive warning:
drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here
[-Werror,-Wuninitialized]
subdevs, n_subdevs, NULL, 0, NULL);
^~~~~~~~~
drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning
int n_subdevs, ret, i;
^
= 0
Ideally, we would rearrange the code to avoid all those early
initializations and have an explicit exit in each disabled case,
but it's much easier to chicken out and add one more initialization
here to shut up the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The logic for setting the of_node on devices created by mfd did not set
the fwnode pointer to match, which caused fwnode-based APIs to
malfunction on these devices since the fwnode pointer was null. Fix
this.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Easier to find and maintain if the device tables sorted by ID.
Do it here for intel-lpss MFD driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The RTC core already has error messages in case of failure, there is no
need to have another message in the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Allow overwriting the values in BD718XX_REG_PWRONCONFIG0 and
BD718XX_REG_PWRONCONFIG1 via devicetree. Read values in milliseconds and
attempt to round them to something supported by the hardware.
Keep existing values (from bootloader or OTP) if property is not
present.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
[Lee: Fixed-up merge/API conflict]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The reset button on imx8mm-evk is tied to PWRON_B pin of bd71847 and the
long press duration is set to zero from OTP. The linux driver overrides
those values and breaks reset from button.
Overwriting OTP or bootloader configuration with some hardcoded defaults
is not desirable, keep already programmed values instead.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Register driver when EC indicates has precise lid angle calculation code
running.
Fix incorrect extra resource allocation in cros_ec_sensors_register().
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT
OF mathing mechanism and register it.
Before this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
After this patch:
modinfo ./drivers/mfd/madera.ko | grep alias
alias: of:N*T*Ccirrus,wm1840C*
alias: of:N*T*Ccirrus,wm1840
alias: of:N*T*Ccirrus,cs47l91C*
alias: of:N*T*Ccirrus,cs47l91
alias: of:N*T*Ccirrus,cs47l90C*
alias: of:N*T*Ccirrus,cs47l90
alias: of:N*T*Ccirrus,cs47l85C*
alias: of:N*T*Ccirrus,cs47l85
alias: of:N*T*Ccirrus,cs47l35C*
alias: of:N*T*Ccirrus,cs47l35
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The RK809 and RK817 are a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
- Regulators
- RTC
- Clocking
Both RK809 and RK817 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.
Most of regulators have a some implementation also.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
ROHM BD70528MWV is an ultra-low quiescent current general
purpose single-chip power management IC for battery-powered
portable devices.
Add MFD core which enables chip access for following subdevices:
- regulators/LED drivers
- battery-charger
- gpios
- 32.768kHz clk
- RTC
- watchdog
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Split the bd718x7.h to ROHM common and bd718x7 specific parts
so that we do not need to add same things in every new ROHM
PMIC header. Please note that this change requires changes also
in bd718x7 sub-device drivers for regulators and clk.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for 4-phase LP87561 combination.
Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
include when we had clk_readl() and clk_writel(), but those are gone now
so this patch pushes the dependency out to the users of clk-provider.h.
-----BEGIN PGP SIGNATURE-----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=JjQo
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk framework updates from Stephen Boyd:
"One more patch to remove io.h from clk-provider.h.
We used to need this include when we had clk_readl() and clk_writel(),
but those are gone now so this patch pushes the dependency out to the
users of clk-provider.h"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Remove io.h from clk-provider.h
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
Support Touchpad MCU as a special of CrOS EC devices. The current
Touchpad MCU is used on Eve Chromebook and used the same protocol as
other CrOS EC devices.
When a MCU has touchpad support (aka EC_FEATURE_TOUCHPAD), it is
instantiated as a special CrOS EC device with device name 'cros_tp'. So
regardless of the probing order between the actual cros_ec and cros_tp,
the userspace and other kernel drivers should not confuse them.
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Support Fingerprint MCU as a special of CrOS EC devices. The current FP
MCU uses the same EC SPI protocol v3 as other CrOS EC devices on a SPI
bus.
When a MCU has fingerprint support (aka EC_FEATURE_FINGERPRINT), it is
instantiated as a special CrOS EC device with device name 'cros_fp'. So
regardless of the probing order between the actual cros_ec and cros_fp,
the userspace and other kernel drivers should not confuse them.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Intel Comet Lake has the same LPSS than Intel Cannon Lake.
Add the new IDs to the list of supported devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Since there are more IOT2040 variants with identical hardware but
different asset tags, the asset tag matching should be adjusted to
support them.
For the board name "SIMATIC IOT2000", currently there are 2 types of
hardware, IOT2020 and IOT2040. Both are identical regarding the
intel_quark_i2c_gpio. In the future there will be no other devices with
the "SIMATIC IOT2000" DMI board name but different hardware. So remove
the asset tag matching from this driver.
Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.
Before this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias: spi:tps65912
After this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias: of:N*T*Cti,tps65912C*
alias: of:N*T*Cti,tps65912
alias: spi:tps65912
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The AXP803 has a VBUS power input. Its functionality is the same as the
one found in the AXP813. Now that the axp20x_usb_power driver supports
this variant, we can add an mfd cell for it to use it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When CONFIG_OF is disabled, we get a harmless warning about an
unused variable:
drivers/mfd/sun6i-prcm.c: In function 'sun6i_prcm_probe':
drivers/mfd/sun6i-prcm.c:151:22: error: unused variable 'np' [-Werror=unused-variable]
Remove the variable and open-code the value in the only place
it is used, so it can get left out as well without CONFIG_OF.
Fixes: a05a2e7998 ("mfd: sun6i-prcm: Allow to compile with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support in code for the new forms of the host sleep event.
Detects the presence of this version of the command at runtime,
and use whichever form the EC supports. At this time, always
request the default timeout, and only report the failing response
via a WARN_ONCE(). Future versions could accept the sleep parameter
from outside the driver, and return the response information to
usermode or elsewhere.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rajat Jain <rajatja@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add the cros-usbpd-logger driver for logging event data for the USB PD
charger available in the Embedded Controller on ChromeOS systems. The
logging feature is logically separate functionality from charge manager,
hence is instantiated as a different driver.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenetr Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a second AEC loopback on cs47l90 so the registers for it should
be readable.
Signed-off-by: Ajit Pandey <ajit.pandey@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a second AEC loopback on cs47l35 so the registers for it should
be readable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are no in-kernel users anymore, so remove this outdated interface.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Covnert the headers of the source and include files to SPDX.
And fix some typos in the descriptions ("interrupt" instead of "I2C").
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The AXP223 can be used both using the RSB proprietary bus, or a more
traditional I2C bus. The RSB is a faster bus and provides more features
(like some integrity checks on the messages), so it's usually preferrable
to use it, but since it's proprietary, when we want to use the PMIC in a
multi-master setup, the i2c might make sense as well.
Let's add that possibility.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Integrated Sensor Hub (ISH) is also a MCU running EC
having feature bit EC_FEATURE_ISH. Instantiate it as
a special CrOS EC device with device name 'cros_ish'.
Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add compatible for SAM9X60 HLCD controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The AXP813 has a VBUS power input. Now that the axp20x_usb_power driver
supports this variant, we can add an mfd cell for it to use it.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
[wens@csie.org: add commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Charles Keepax