Commit Graph

619795 Commits

Author SHA1 Message Date
David S. Miller 9c5982fe26 Merge branch 'fib-offload-notifications'
Jiri Pirko says:

====================
fib offload: switch to notifier

The goal of this patchset is to allow driver to propagate all prefixes
configured in kernel down HW. This is necessary for routing to work
as expected. If we don't do that HW might forward prefixes known to kernel
incorrectly. Take an example when default route is set in switch HW and there
is an IP address set on a management (non-switch) port.

Currently, only FIB entries related to the switch port netdev are
offloaded using switchdev ops. This model is not extendable so the
first patch introduces a replacement: notifier to propagate FIB entry
additions and removals to whoever is interested.

The second patch introduces couple of helpers to deal with RTNH_F_OFFLOAD
flags. Currently it is set in switchdev core. There the assumption is
that only one offload device exists. But for FIB notifier, we assume
multiple offload devices. So the patch introduces a per FIB entry
reference counter and helpers use it in order to achieve this:
   0 means RTNH_F_OFFLOAD is not set, no device offloads this entry
   n means RTNH_F_OFFLOAD is set and the entry is offloaded by n devices

Patches 3 and 4 convert mlxsw and rocker to adopt this new way, registering
one notifier block for each asic instance. Both of these patches also
implement internal "abort" mechanism.

Using switchdev ops, "abort" is called by switchdev core whenever there is
an error during FIB entry add offload. This leads to removal of all
offloaded entries on system by fib_trie code.

Now the new notifier assumes the driver takes care of the abort action.
Here's why:
1) The fact that one HW cannot offload an entry does not mean that the
   others can't do it. So let only one entity to abort and leave the rest
   to work happily.
2) The driver knows what to in order to properly abort. For example,
   currently abort is broken for mlxsw, as for Spectrum there is a need
   to set 0.0.0.0/0 trap in RALUE register.

The fifth patch removes the old, no longer used FIB offload infrastructure.

The last patch reflects the changes into switchdev documentation file.

---
v2->v3:
 -patch 3/6
   -fixed offload inc/dec to be done in fib4_entry_init/fini and only
    in case !trap as suggested by Ido
v1->v2:
 -patch 3/6:
   -fixed lpm tree setup and binding for abort and pointed out by Ido
   -do nexthop checks as suggested by Ido
   -fix use after free during abort
 -patch 6/6:
   -fixed texts as suggested by Ido
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:20 -04:00
Jiri Pirko fd41b0eaa0 doc: update switchdev L3 section
This is to reflect the change of FIB offload infrastructure from
switchdev objects to FIB notifier.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:00 -04:00
Jiri Pirko 347e3b28c1 switchdev: remove FIB offload infrastructure
Since this is now taken care of by FIB notifier, remove the code, with
all unused dependencies.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:00 -04:00
Jiri Pirko 936bd48656 rocker: use FIB notifications instead of switchdev calls
Until now, in order to offload a FIB entry to HW we use switchdev op.
Use the newly introduced FIB notifier infrasturucture to process
FIB entries to offload the in HW.
Abort mechanism is now handled within the rocker driver.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:00 -04:00
Jiri Pirko b45f64d16d mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls
Until now, in order to offload a FIB entry to HW we use switchdev op.
However that has limits. Mainly in case we need to make the HW aware of
all route prefixes configured in kernel. HW needs to know those in order
to properly trap appropriate packets and pass the to kernel to do
the forwarding. Abort mechanism is now handled within the mlxsw driver.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:00 -04:00
Jiri Pirko c98501879b fib: introduce FIB info offload flag helpers
These helpers are to be used in case someone offloads the FIB entry. The
result is that if the entry is offloaded to at least one device, the
offload flag is set.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:00 -04:00
Jiri Pirko b90eb75494 fib: introduce FIB notification infrastructure
This allows to pass information about added/deleted FIB entries/rules to
whoever is interested. This is done in a very similar way as devinet
notifies address additions/removals.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 04:48:00 -04:00
Hadar Hen Zion eb523f42d7 net/sched: cls_flower: Use a proper mask value for enc key id parameter
The current code use the encapsulation key id value as the mask of that
parameter which is wrong. Fix that by using a full mask.

Fixes: bc3103f1ed ('net/sched: cls_flower: Classify packet in ip tunnels')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 03:11:22 -04:00
David S. Miller dfdc771d03 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2016-09-27

This series contains updates to igb and igbvf.

Wei Yongjun makes a function static to shut up sparse.

Todd bumps the igb and igbvf version, which is long overdue.

Jake fixes an issue where the PPS SYS_WRAP interrupt was not re-enabled
after a reset, which resulted in disabling of the PPS signaling.

v2: dropped patch 5 of the original series, since the PCI quirk patch
    needs to be reworked by Alex and Sasha to address issues that Bjorn
    Helgaas and Alex Williamson brought up.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 23:22:27 -04:00
Shaohua Li 3796c3cbfb lib: clean up put_cpu_var usage
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.

This doesn't change the behavior.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 22:09:17 -04:00
Shaohua Li b761fe226b bpf: clean up put_cpu_var usage
put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.

This doesn't change the behavior.

Cc: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 22:09:17 -04:00
Jacob Keller ac28b41aac igb: restore PPS signal on igb_ptp_reset
When a reset occurs, the PPS SYS_WRAP interrupt was not re-enabled which
resulted in disabling of the PPS signaling. Fix this by recording when
the interrupt is on and ensuring that we re-enable it every time we
reset.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27 19:00:52 -07:00
Todd Fujinaka 0742337c19 igb: bump version to igb-5.4.0
Bump igb version to match other igb drivers.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27 19:00:52 -07:00
Todd Fujinaka 3d05fd0a99 igbvf: bump version to igbvf-2.4.0
Bump version to match other igbvf drivers.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27 19:00:52 -07:00
Wei Yongjun 7a823471ad igb: fix non static symbol warning
Fixes the following sparse warning:

drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning:
 symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-27 19:00:52 -07:00
Rafał Miłecki 7f00ee2bbc brcmfmac: use correct skb freeing helper when deleting flowring
Flowrings contain skbs waiting for transmission that were passed to us
by netif. It means we checked every one of them looking for 802.1x
Ethernet type. When deleting flowring we have to use freeing function
that will check for 802.1x type as well.

Freeing skbs without a proper check was leading to counter not being
properly decreased. This was triggering a WARNING every time
brcmf_netdev_wait_pend8021x was called.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend@broadcom.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27 18:47:55 +03:00
Rafał Miłecki 2f0e56fa37 brcmfmac: replace WARNING on timeout with a simple error message
Even with timeout increased to 950 ms we get WARNINGs from time to time.
It mostly happens on A-MPDU stalls (e.g. when station goes out of
range). It may take up to 5-10 secods for the firmware to recover and
for that time it doesn't process packets.

It's still useful to have a message on time out as it may indicate some
firmware problem and incorrect key update. Raising a WARNING however
wasn't really that necessary, it doesn't point to any driver bug anymore
and backtrace wasn't much useful.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27 18:47:08 +03:00
Larry Finger 8334ffdc82 rtlwifi: Add explicit values to hw_variables enum
The entries in this enum may be referenced in debug output. Adding explicit
values simplifies the lookup.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27 18:46:03 +03:00
Larry Finger 1cc49a5b54 rtlwifi: Add HAL_DEF_WOWLAN case to *_get_hw() routines
Only rtl8821ae implements WOWLAN; however, the other drivers may receive
a call requesting information about this mode. The other drivers need to
ignore the request rather than logging that the default branch of the
switch statement has been reached.

Reported by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27 18:46:03 +03:00
Joe Perches ad5748893b rtlwifi: Add switch variable to 'switch case not processed' messages
Help along debugging by showing what switch/case variable is not
being processed in these messages.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-27 18:44:19 +03:00
Kalle Valo 0ad523c8a1 * Some new HW IDs;
* Small fix in CTDP error handling;
 * Remove support for older firmwares;
 * Clean-ups and a few simple fixes here and there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX6YI4AAoJEKFHnKIaPMX6fh0QAJwFfvpZ9gG/TQbxHeqxqQS1
 ZQ8bV/8mCkMZlifAeR5NGEEkIwdHl/nCkkwZv9j4vGCb0M6qA2Pd8Uh1tpJgkSlB
 c4NK9LdLdRJBJkpXOgCW9gPPgXAP3/9VqOMNm4jx0RPLpjBhCopcubLFcymND7cc
 OGIvs1RkragAUkIKQw2jy9HauRV6co+R99ZFTcVCPalNhtmgrdfZzZaN13S2VYjV
 ln+fepJFeL2HgDyvx4FdnfzwPHgk90/b/kSmSQJ/ebRNVn2BAkG3BEyAIG4kEcBa
 jsavKYjGNXIlGOoab0gY3WZdcxk3AprOYwIELxFzMML5sXYvY9K/9EpYLNPSiHIy
 cwYlvV9Itq0GAtVFyatqoqy4yO951MlLd7+gfBP8a/6K1T22sMayg+B/dHROo4UG
 SIdI/Ayai1SVuAyMpO9AK9jsC+uWcyR9DhyWT2fC1zzYQ3wtfVfWlDcXqtfZDjTC
 QlVI2uOGsVeNFUSNGCOxOoOBIaRzGB2FwU9jVIideeMEWVL1qVMeBz3Nooi1z33k
 o6qvm6N8674JqlKC/WQn87k2+gsKSGEgRVEEF1HyA3CP5NQ7aU7ZNQJGiNxsezwd
 hSSgu3WseB2OT19W6rjPkonrgS2C7ecU7oL0Y84ozW2hkS0vgtD8QLau8aIHUL/t
 hqIwPQ1lb/8B/X5t7ECl
 =MdMZ
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2015-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

* Some new HW IDs;
* Small fix in CTDP error handling;
* Remove support for older firmwares;
* Clean-ups and a few simple fixes here and there.
2016-09-27 18:32:24 +03:00
jbaron@akamai.com e96e0eded1 bnx2x: free the mac filter group list before freeing the cmd
The group list must be freed prior to freeing the command otherwise
we have a use-after-free.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 09:55:18 -04:00
David S. Miller 44675a6df8 Merge branch 'mediatek-pdam-lro-fixes'
Nelson Chang says:

====================
net: ethernet: mediatek: some bug fixes for PDAM and HW LRO

1) Add to stop PDMA while stopping the frame engine
2) Modify the register settings for LRO relinquishments
3) Jump out from the waiting loop while LRO relinquishments are done
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 09:41:38 -04:00
Nelson Chang ca3ba106a9 net: ethernet: mediatek: bug fix to disable HW LRO
(1) Modify the register settings for LRO relinquishments
(2) Jump out from the waiting loop while LRO relinquishments are done

Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 09:41:31 -04:00
Nelson Chang 6bf563d50a net: ethernet: mediatek: add to stop PDMA while stopping the frame engine
Stop PDMA while the frame engine is going to stop.

Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 09:41:31 -04:00
Ben Greear 30d2049b32 ath10k: support up to 64 vdevs
The (1 << x) - 1 trick won't work when you
are trying to fill up all 64 bits, so add special
case for that.

Signed-off-by: Ben Greear <greearb@candelatech.com>
[kvalo@qca.qualcomm.com: remove the sentence about moving limits]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:18:33 +03:00
Ben Greear 15138fdf32 ath10k: document cycle count related counters
They are not necessarily named in an intuitive manner,
so at least add some comments to help the next person.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:18:29 +03:00
Ben Greear aa66ba0c31 ath10k: fix typo in logging message
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:18:24 +03:00
Vasanthakumar Thiagarajan 2f38c3c01d ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode
Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future)
rx_hdr_status is not padded to align in 4-byte boundary. Define a
new hw_params field to handle different alignment behaviour between
different hw. This patch fixes improper retrieval of rfc1042 header
with QCA4019. This patch along with "ath10k: Properly remove padding
from the start of rx payload" will fix traffic failure in ethernet
decap mode for QCA4019.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:15:51 +03:00
Masahiro Yamada 65901a9e70 ath10k: do not check if reset is NULL
Since reset_control_get() never returns NULL, we can use IS_ERR()
instead of IS_ERR_OR_NULL().  The return statements can be simpler
as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:11:52 +03:00
Masahiro Yamada c5d8a34675 ath10k: use devm_reset_control_get() instead of reset_control_get()
Use the managed variant of reset_control_get() to simplify the
failure path and the .remove callback.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:11:48 +03:00
Masahiro Yamada 828662753d ath10k: use devm_clk_get() instead of clk_get()
Use the managed variant of clk_get() to simplify the failure path
and the .remove callback.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:11:43 +03:00
Joe Perches e13dbead97 ath10k: spelling and miscellaneous neatening
Correct some trivial comment typos.
Remove unnecessary parentheses in a long line.

Signed-off-by: Joe Perches <joe@perches.com>
[kvalo@qca.qualcomm.com: drop the change for return]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27 15:00:48 +03:00
David S. Miller 3783c09eab Merge branch 'bcmgenet-phydev-revert'
Philippe Reynes says:

====================
net: bcmgenet: only use new api ethtool_{get|set}_link_ksettings

Some times ago, a serie of patches were committed :
- commit 62469c7600 ("net: ethernet: bcmgenet: use phydev from struct net_device")
- commit 6b352ebccb ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings")
The first patch add a regression on this driver, so it should be reverted.
As the second patch depend on the former, it should be reverted too.

The first patch is buggy because there is a "trick" in this driver.
The structure phydev is kept in the private data when the interface
go down, and used when the interface go up to enable the phy before
the function phy_connect is called.

I don't have this hardware, neither the datasheet. So I won't
update the driver to avoid this trick.

But the real goal of the first serie was to move to the new api
ethtool_{get|set}_link_ksettings. So I provide a new version of
the patch without the "cleaning" of driver to use the phydev
store in the net_device structure.

Changelog:
v3:
- use priv instead of dev (so all the code use the same phydev)
v2:
- use Florian Fainelli patches for the revert instead of Jaedon Shin
- simply use net: bcmgenet: for the prefix of the patch
====================

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 07:43:56 -04:00
Philippe Reynes fa92bf04f5 net: bcmgenet: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 07:43:07 -04:00
Florian Fainelli 0299b6acf9 Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
This reverts commit 62469c7600 ("net: ethernet: bcmgenet: use phydev
from struct net_device") because it causes GENETv1/2/3 adapters to
expose the following behavior after an ifconfig down/up sequence:

PING fainelli-linux (10.112.156.244): 56 data bytes
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!)

This was previously fixed by commit 5dbebbb44a ("net: bcmgenet:
Software reset EPHY after power on") but the commit we are reverting was
essentially making this previous commit void, here is why.

Without commit 62469c7600 we would have the following scenario after
an ifconfig down then up sequence:

- bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is
  initialized *before* we get to initialize the UniMAC, this is
  critical to ensure the PHY is in a correct state, priv->phydev is
  valid, this code executes fine

- second time from bcmgenet_mii_probe(), through the normal
  phy_init_hw() call (which arguably could be optimized out)

Everything is fine in that case. With commit 62469c7600, we would have
the following scenario to happen after an ifconfig down then up
sequence:

- bcmgenet_close() calls phy_disonnect() which makes dev->phydev become
  NULL

- when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from
  bcmgenet_power_up() to initialize the internal PHY, the NULL check
  becomes true, so we do not reset the PHY, yet we keep going on and
  initialize the UniMAC, causing MAC activity to occur

- we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is
  too late, the PHY is botched, and causes the above bogus pings/packets
  transmission/reception to occur

Reported-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 07:43:07 -04:00
Philippe Reynes 62c8d3daad Revert "net: ethernet: bcmgenet: use new api ethtool_{get|set}_link_ksettings"
This reverts commit 6b352ebccb ("net: ethernet: broadcom: bcmgenet:
use new api ethtool_{get|set}_link_ksettings").

We needs to revert the commit 62469c7600 ("net: ethernet: bcmgenet:
use phydev from struct net_device"), because this commit add a
regression. As the commit 6b352ebccb ("net: ethernet: broadcom:
bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend
on the first one, we also need to revert it first.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 07:43:07 -04:00
Mickaël Salaün 1955351da4 bpf: Set register type according to is_valid_access()
This prevent future potential pointer leaks when an unprivileged eBPF
program will read a pointer value from its context. Even if
is_valid_access() returns a pointer type, the eBPF verifier replace it
with UNKNOWN_VALUE. The register value that contains a kernel address is
then allowed to leak. Moreover, this fix allows unprivileged eBPF
programs to use functions with (legitimate) pointer arguments.

Not an issue currently since reg_type is only set for PTR_TO_PACKET or
PTR_TO_PACKET_END in XDP and TC programs that can only be loaded as
privileged. For now, the only unprivileged eBPF program allowed is for
socket filtering and all the types from its context are UNKNOWN_VALUE.
However, this fix is important for future unprivileged eBPF programs
which could use pointers in their context.

Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 03:51:34 -04:00
Naveen N. Rao 973d94d8a8 bpf samples: update tracex5 sample to use __seccomp_filter
seccomp_phase1() does not exist anymore. Instead, update sample to use
__seccomp_filter(). While at it, set max locked memory to unlimited.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 03:48:58 -04:00
Naveen N. Rao 2b064fff85 bpf samples: fix compiler errors with sockex2 and sockex3
These samples fail to compile as 'struct flow_keys' conflicts with
definition in net/flow_dissector.h. Fix the same by renaming the
structure used in the sample.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 03:48:58 -04:00
Philippe Reynes b6f5be2873 net: tg3: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26 20:17:09 -04:00
Emmanuel Grumbach 9cd70e80f7 iwlwifi: mvm: initialise ADD_STA before sending it to the firmware
When we unshare a queue, the ADD_STA was not properly
initialised.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26 23:15:26 +03:00
Sara Sharon 3ac37d0109 iwlwifi: allow error table address new range
The firmware has a new smart linker, and this table can now be
in ICCM or in SMEM. It is not hardcoded, but depends on code
size. Allow the full range.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26 23:15:25 +03:00
Emmanuel Grumbach 4dc6511f86 iwlwifi: mvm: fix typo in TC_CMD_SEC_KEY_FROM_TABLE
This define should really be TX_CMD_SEC_KEY_FROM_TABLE

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26 23:15:24 +03:00
Luca Coelho 4b87e5af63 iwlwifi: remove support for fw older than -17 and -22
FW versions older than -17 for 3160 and 7260 and older than -22 for
newer NICs are not supported anymore.  Don't load these versions
and remove code that handles them.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26 23:15:14 +03:00
Rafał Miłecki 2df86ad959 brcmfmac: drop unused fields from struct brcmf_pub
They seem to be there from the first day. We calculate these values but
never use them.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26 20:51:02 +03:00
Rafał Miłecki 23e9c128ad brcmfmac: fix memory leak in brcmf_fill_bss_param
This function is called from get_station callback which means that every
time user space was getting/dumping station(s) we were leaking 2 KiB.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Fixes: 1f0dc59a6d ("brcmfmac: rework .get_station() callback")
Cc: stable@vger.kernel.org # 4.2+
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26 20:49:10 +03:00
Larry Finger b42fbed6b8 rtl8xxxu: Stop log spam from each successful interrupt
As soon as debugging is turned on, the logs are filled with messages
reporting the interrupt status. As this quantity is usually zero, this
output is not needed. In fact, there will be a report if the status is
not zero, thus the debug line in question could probably be deleted.
Rather than taking that action, I have changed it to only be printed
when the newly added RTL8XXXU_DEBUG_INTERRUPT bit is set in the debug
mask.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26 20:41:37 +03:00
Jes Sorensen 2fc5dd27bf rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device()
This saves some 217, or about, derefences of priv->fops.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26 20:41:36 +03:00
Jes Sorensen c0a99bbb1b rtl8xxxu: Clean up llt_init() API
Remove last_tx_page argument from the llt_init() function. The
rtl8xxxu_fileops structure contains the correct TX_TOTAL_PAGE_NUM
value for the device, and rtl8xxxu_auto_llt_table() doesn't need to
know the value in the first place.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26 20:41:36 +03:00