If the file mode is marked as "lazy," perform cached/buffered reads when
the caps permit it. Adjust the rdcache_gen and invalidation logic
accordingly so that we manage our cache based on the FILE_CACHE -or-
FILE_LAZYIO cap bits.
Signed-off-by: Sage Weil <sage@newdream.net>
If we have marked a file as "lazy" (using the ceph ioctl), perform buffered
writes when the MDS caps allow it.
Signed-off-by: Sage Weil <sage@newdream.net>
Allow an application to mark a file descriptor for lazy file consistency
semantics, allowing buffered reads and writes when multiple clients are
accessing the same file.
Signed-off-by: Sage Weil <sage@newdream.net>
Also clean up the file flags -> file mode -> wanted caps functions while
we're at it. This resyncs this file with userspace.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes an issue triggered by running concurrent syncs. One of the syncs
would go through while the other would just hang indefinitely. In any case, we
never actually want to wake a single waiter, so the *_all functions should
be used.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
When we embed a dentry lease release notification in a request, invalidate
our lease so we don't think we still have it. Otherwise we can get all
sorts of incorrect client behavior when multiple clients are interacting
with the same part of the namespace.
Signed-off-by: Sage Weil <sage@newdream.net>
Free the ceph_pg_mapping structs when they are removed from the pg_temp
rbtree. Also fix a leak in the __insert_pg_mapping() error path.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to set the d_release dop for snapdir and snapped dentries so that
the ceph_dentry_info struct gets released. We also use the dcache to
cache readdir results when possible, which only works if we know when
dentries are dropped from the cache. Since we don't use the dcache for
readdir in the hidden snapdir, avoid that case in ceph_dentry_release.
Signed-off-by: Sage Weil <sage@newdream.net>
We should always go to the MDS for readdir on the hidden snapdir. The
set of snapshots can change at any time; the client can't trust its cache
for that.
Signed-off-by: Sage Weil <sage@newdream.net>
Strip the cap and dentry releases from replayed messages. They can
cause the shared state to get out of sync because they were generated
(with the request message) earlier, and no longer reflect the current
client state.
Signed-off-by: Sage Weil <sage@newdream.net>
Replayed rename operations (after an mds failure/recovery) were broken
because the request paths were regenerated from the dentry names, which
get mangled when d_move() is called.
Instead, resend the previous request message when replaying completed
operations. Just make sure the REPLAY flag is set and the target ino is
filled in.
This fixes problems with workloads doing renames when the MDS restarts,
where the rename operation appears to succeed, but on mds restart then
fails (leading to client confusion, app breakage, etc.).
Signed-off-by: Sage Weil <sage@newdream.net>
The buffer was too small. Make it bigger, use snprintf(), put brackets
around the ipv6 address to avoid mixing it up with the :port, and use the
ever-so-handy %pI[46] formats.
Signed-off-by: Sage Weil <sage@newdream.net>
A message can be on a queue (pending or sent), or out_msg (sending), or
both. We were assuming that if it's not on a queue it couldn't be out_msg,
but that was false in the case of lossy connections like the OSD. Fix
ceph_con_revoke() to treat these cases independently. Also, fix the
out_kvec_is_message check to only trigger if we are currently sending
_this_ message.
This fixes a GPF in tcp_sendpage, triggered by OSD restarts.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to increase the total and used counters when allocating a new cap
in the non-reserved (cap import) case.
Signed-off-by: Sage Weil <sage@newdream.net>
We can drop caps with an mds request. Ensure we only drop unused AND
clean caps, since the MDS doesn't support cap writeback in that context,
nor do we track it. If caps are dirty, and the MDS needs them back, we
it will revoke and we will flush in the normal fashion.
This fixes a possibly loss of metadata.
Signed-off-by: Sage Weil <sage@newdream.net>
We may not recurse for CHOOSE_LEAF if we start with a leaf node. When
that happens, the out2 vector needs to be filled in with the result.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes a race between handle_reply finishing an mds request, signalling
completion, and then dropping the request structing and its dentry+inode
refs, and pre_umount function waiting for requests to finish before
letting the vfs tear down the dcache. If umount was delayed waiting for
mds requests, we could race and BUG in shrink_dcache_for_umount_subtree
because of a slow dput.
This delays umount until the msgr queue flushes, which means handle_reply
will exit and will have dropped the ceph_mds_request struct. I'm assuming
the VFS has already ensured that its calls have all completed and those
request refs have thus been dropped as well (I haven't seen that race, at
least).
Signed-off-by: Sage Weil <sage@newdream.net>
Handle a splice_dentry failure (due to a d_materialize_unique error)
without crashing. (Also, report the error code.)
Signed-off-by: Sage Weil <sage@newdream.net>
If the incremental osdmap has a new crush map, advance the position after
decoding so that we can parse the rest of the osdmap properly.
Signed-off-by: Sage Weil <sage@newdream.net>
We need to properly initialize skip, as not all alloc_msg op instances
set it.
Also, BUG if someone says skip but also allocates a message.
Signed-off-by: Sage Weil <sage@newdream.net>
If we have enough memory to allocate a new cap release message, do so, so
that we can send a partial release message immediately. This keeps us from
making the MDS wait when the cap release it needs is in a partially full
release message.
If we fail because of ENOMEM, oh well, they'll just have to wait a bit
longer.
Signed-off-by: Sage Weil <sage@newdream.net>
If we get an IMPORT that give us a cap, but we don't have the inode, queue
a release (and try to send it immediately) so that the MDS doesn't get
stuck waiting for us.
Signed-off-by: Sage Weil <sage@newdream.net>
bdi_seq is an atomic_long_t but we're using ATOMIC_INIT, which causes
build failures on ia64. This patch fixes it to use ATOMIC_LONG_INIT.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If the client revokes a lease with a higher seq than what we have, keep
the mds's seq, so that it honors our release. Otherwise, we can hang
indefinitely.
Signed-off-by: Sage Weil <sage@newdream.net>
We were setting f_namelen in kstatfs to PATH_MAX instead of NAME_MAX.
That disagrees with ceph_lookup behavior (which checks against NAME_MAX),
and also makes the pjd posix test suite spit out ugly errors because with
can't clean up its temporary files.
Signed-off-by: Sage Weil <sage@newdream.net>
We misused list_move_tail() to order the dentry in d_subdirs.
This will screw up the d_subdirs order.
This bug can be reliably reproduced by:
1. mount ceph fs.
2. on ceph fs, git clone git://ceph.newdream.net/git/ceph.git
3. Run autogen.sh in ceph directory.
(Note: Errors only occur at the first time you run autogen.sh.)
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: clean up on forwarded aborted mds request
ceph: fix leak of osd authorizer
ceph: close out mds, osd connections before stopping auth
ceph: make lease code DN specific
fs/ceph: Use ERR_CAST
ceph: renew auth tickets before they expire
ceph: do not resend mon requests on auth ticket renewal
ceph: removed duplicated #includes
ceph: avoid possible null dereference
ceph: make mds requests killable, not interruptible
sched: add wait_for_completion_killable_timeout
If an mds request is aborted (timeout, SIGKILL), it is left registered to
keep our state in sync with the mds. If we get a forward notification,
though, we know the request didn't succeed and we can unregister it
safely. We were trying to resend it, but then bailing out (and not
unregistering) in __do_request.
Signed-off-by: Sage Weil <sage@newdream.net>
The auth module (part of the mon_client) is needed to free any
ceph_authorizer(s) used by the mds and osd connections. Flush the msgr
workqueue before stopping monc to ensure that the destroy_authorizer
auth op is available when those connections are closed out.
Signed-off-by: Sage Weil <sage@newdream.net>
The lease code includes a mask in the CEPH_LOCK_* namespace, but that
namespace is changing, and only one mask (formerly _DN == 1) is used, so
hard code for that value for now.
If we ever extend this code to handle leases over different data types we
can extend it accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of
the returned value is the same as the type of the enclosing function.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
We were only requesting renewal after our tickets expire; do so before
that. Most of the low-level logic for this was already there; just use
it.
Signed-off-by: Sage Weil <sage@newdream.net>
We only want to send pending mon requests when we successfully
authenticate. If we are already authenticated, like when we renew our
ticket, there is no need to resend pending requests.
Signed-off-by: Sage Weil <sage@newdream.net>
fs/ceph/auth.c: linux/slab.h is included more than once.
fs/ceph/super.h: linux/slab.h is included more than once.
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sage Weil <sage@newdream.net>
ac->ops may be null; use protocol id in error message instead.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The underlying problem is that many mds requests can't be restarted. For
example, a restarted create() would return -EEXIST if the original request
succeeds. However, we do not want a hung MDS to hang the client too. So,
use the _killable wait_for_completion variants to abort on SIGKILL but
nothing else.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (59 commits)
ceph: reuse mon subscribe message instead of allocated anew
ceph: avoid resending queued message to monitor
ceph: Storage class should be before const qualifier
ceph: all allocation functions should get gfp_mask
ceph: specify max_bytes on readdir replies
ceph: cleanup pool op strings
ceph: Use kzalloc
ceph: use common helper for aborted dir request invalidation
ceph: cope with out of order (unsafe after safe) mds reply
ceph: save peer feature bits in connection structure
ceph: resync headers with userland
ceph: use ceph. prefix for virtual xattrs
ceph: throw out dirty caps metadata, data on session teardown
ceph: attempt mds reconnect if mds closes our session
ceph: clean up send_mds_reconnect interface
ceph: wait for mds OPEN reply to indicate reconnect success
ceph: only send cap releases when mds is OPEN|HUNG
ceph: dicard cap releases on mds restart
ceph: make mon client statfs handling more generic
ceph: drop src address(es) from message header [new protocol feature]
...
Use the same message, allocated during startup. No need to reallocate a
new one each time around (and potentially ENOMEM).
Signed-off-by: Sage Weil <sage@newdream.net>
Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.
The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The auth_reply handler will (re)send any pending requests. For the
initial mon authenticate phase, that's correct, but when a auth ticket
renewal races with an in-flight request, we may resend a request message
that is already in flight. Avoid this by revoking the message before
sending it.
We should also avoid resending requests at all during ticket renewal; that
will come soon.
Signed-off-by: Sage Weil <sage@newdream.net>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sage Weil <sage@newdream.net>
This is essential, as for the rados block device we'll need
to run in different contexts that would need flags that
are other than GFP_NOFS.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Specify max bytes in request to bound size of reply. Add associated
mount option with default value of 512 KB.
Signed-off-by: Sage Weil <sage@newdream.net>
Use kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
We invalidate I_COMPLETE and dentry leases in two places: on aborted mds
request and on request replay. Use common helper to avoid duplicate code.
Signed-off-by: Sage Weil <sage@newdream.net>
The remove_session_caps() helper is called when an MDS closes out our
session (either normally, or as a result of a failed reconnect), and when
we tear down state for umount. If we remove the last cap, and there are
no cap migrations in progress, then there is little hope of us flushing
out that data to the mds (without heroic efforts to reconnect and flush).
So, to avoid leaving inodes pinned (due to dirty state) and crashing after
umount, throw out dirty caps state and unpin the inodes. Print a warning
to the console so we know something was lost.
NOTE: Although we drop wrbuffer refs, we don't actually mark pages clean;
maybe a truncate should be queued?
Signed-off-by: Sage Weil <sage@newdream.net>
Currently, if our session is closed (due to a timeout, or explicit close,
or whatever), we just sit there doing nothing unless/until the MDS
restarts, at which point we try to reconnect.
Change client to attempt an immediate reconnect if our session is closed.
Note that currently the MDS doesn't support this, and our attempt will
fail. We'll get a session CLOSE, our caps and dirty cap state will be
dropped, and the client will be free to attempt to reconnect. That's
clearly not as nice as a successful reconnect, but it at least allows us
to try to carry on, and in the future the MDS will support a reconnect
and we will fare better.
Signed-off-by: Sage Weil <sage@newdream.net>
Pass a ceph_mds_session, since the caller has it.
Remove the dead code for sending empty reconnects. It used to be used
when the MDS contacted _us_ to solicit a reconnect, and we could reply
saying "go away, I have no session." Now we only send reconnects based
on the mds map, and only when we do in fact have an open session.
Signed-off-by: Sage Weil <sage@newdream.net>
We used to infer reconnect success by watching the MDS state, essentially
assuming that hearing nothing meant things were ok. That wasn't
particularly reliable. Instead, the MDS replies with an explicit OPEN
message to indicate success.
Strictly speaking, this is a protocol change, but it is a backwards
compatible one that does not break new clients + old servers or old
clients + new servers. At least not yet.
Drop unused @all argument from kick_requests while we're at it.
Signed-off-by: Sage Weil <sage@newdream.net>
On OPENING we shouldn't have any caps (or releases).
On CLOSING, we should wait until we succeed (and throw it all out), or
don't (and are OPEN again).
On RECONNECTING we can wait until we are OPEN.
Signed-off-by: Sage Weil <sage@newdream.net>
If the MDS restarts, the expire caps state is no longer shared, and can be
thrown out. Caps state will be rebuilt on the MDS during the reconnect
process that follows. Zero out any release messages and adjust the
release counter accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
This is being done so that we could reuse the statfs
infrastructure with other requests that return values.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The CEPH_FEATURE_NOSRCADDR protocol feature avoids putting the full source
address in each message header (twice). This patch switches the client to
the new scheme, and _requires_ this feature on the server. The server
will support both the old and new schemes. That means an old client will
work with a new server, but a new client will not work with an old server.
Signed-off-by: Sage Weil <sage@newdream.net>
The bdi_setup_and_register() helper doesn't help us since we bdi_init() in
create_client() and bdi_register() only when sget() succeeds.
Signed-off-by: Sage Weil <sage@newdream.net>
We want to assign an offset when the dentry goes from null to linked, which
is always done by splice_dentry(). Notably, we should NOT assign an
offset when a dentry is first created and is still null.
BUG if we try to splice a non-null dentry (we shouldn't).
Signed-off-by: Sage Weil <sage@newdream.net>
If the version hasn't changed, don't rebuild the index.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If we use the xattr_blob, clear the pointer so we don't release the memory
at the bottom of the fuction.
Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Simplify messenger locking, and close race between ceph_con_close() setting
the CLOSED bit and con_work() checking the bit, then taking the mutex.
Signed-off-by: Sage Weil <sage@newdream.net>
d_obtain_alias() doesn't return NULL, it returns an ERR_PTR().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
We only need to pass in front_len. Callers can attach any other payload
pieces (middle, data) as they see fit.
Signed-off-by: Sage Weil <sage@newdream.net>
Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure
instead, and fix up the callers (about half of which were wrong anyway).
Signed-off-by: Sage Weil <sage@newdream.net>
Since we don't need to maintain large pools of messages, we can just
use the standard mempool_t. We maintain a msgpool 'wrapper' because we
need the mempool_t* in the alloc function, and mempool gives us only
pool_data.
Signed-off-by: Sage Weil <sage@newdream.net>
ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.
-static inline struct ceph_client *ceph_client(struct super_block *sb)
-{
- return sb->s_fs_info;
-}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
This would only trigger if we bailed out before resetting r_con_filling_msg
because the server reply was corrupt (oversized).
Signed-off-by: Sage Weil <sage@newdream.net>
"xattr" is never NULL here. We took care of that in the previous
if statement block.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Following Nick Piggin patches in btrfs, pagecache pages should be
allocated with __page_cache_alloc, so they obey pagecache memory
policies.
Also, using add_to_page_cache_lru instead of using a private
pagevec where applicable.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
If we abort a request, we return to caller, but the request may still
complete. And if we hold the dir FILE_EXCL bit, we may not release a
lease when sending a request. A simple un-tar, control-c, un-tar again
will reproduce the bug (manifested as a 'Cannot open: File exists').
Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so
we don't have valid (but incorrect) leases. Do the same, consistently, at
other sites where I_COMPLETE is similarly cleared.
Signed-off-by: Sage Weil <sage@newdream.net>
When we abort requests we need to prevent fill_trace et al from doing
anything that relies on locks held by the VFS caller. This fixes a race
between the reply handler and the abort code, ensuring that continue
holding the dir mutex until the reply handler completes.
Signed-off-by: Sage Weil <sage@newdream.net>
We would occasionally BUG out in the reply handler because r_reply was
nonzero, due to a race with ceph_mdsc_do_request temporarily setting
r_reply to an ERR_PTR value. This is unnecessary, messy, and also wrong
in the EIO case.
Clean up by consistently using r_err for errors and r_reply for messages.
Also fix the abort logic to trigger consistently for all errors that return
to the caller early (e.g., EIO from timeout case). If an abort races with
a reply, use the result from the reply.
Also fix locking for r_err, r_reply update in the reply handler.
Signed-off-by: Sage Weil <sage@newdream.net>
If the tcp connection drops and we reconnect to reestablish a stateful
session (with the mds), we need to resend previously sent (and possibly
received) messages with the _same_ seq # so that they can be dropped on
the other end if needed. Only assign a new seq once after the message is
queued.
Signed-off-by: Sage Weil <sage@newdream.net>
The iterate_session_caps helper traverses the session caps list and tries
to grab an inode reference. However, the __ceph_remove_cap was clearing
the inode backpointer _before_ removing itself from the session list,
causing a null pointer dereference.
Clear cap->ci under protection of s_cap_lock to avoid the race, and to
tightly couple the list and backpointer state. Use a local flag to
indicate whether we are releasing the cap, as cap->session may be modified
by a racing thread in iterate_session_caps.
Signed-off-by: Sage Weil <sage@newdream.net>
We shouldn't leak any prior memory contents to other parties. And random
data, particularly in the 'version' field, can cause problems down the
line.
Signed-off-by: Sage Weil <sage@newdream.net>
The session->s_waiting list is protected by mdsc->mutex, not s_mutex. This
was causing (rare) s_waiting list corruption.
Fix errors paths too, while we're here. A more thorough cleanup of this
function is coming soon.
Signed-off-by: Sage Weil <sage@newdream.net>
OSD requests need to be resubmitted on any pg mapping change, not just when
the pg primary changes. Resending only when the primary changes results in
occasional 'hung' requests during osd cluster recovery or rebalancing.
Signed-off-by: Sage Weil <sage@newdream.net>
It's possible the MDS will not issue caps on a snapped inode, in which case
an open request may not __ceph_get_fmode(), botching the open file
counting. (This is actually a server bug, but the client shouldn't BUG out
in this case.)
Signed-off-by: Sage Weil <sage@newdream.net>
The osd request wasn't being unregistered when the osd returned a failure
code, even though the result was returned to the caller. This would cause
it to eventually time out, and then crash the kernel when it tried to
resend the request using a stale page vector.
Signed-off-by: Sage Weil <sage@newdream.net>
The ->writepages writeback_control is not still valid in the writepages
completion. We were touching it solely to adjust pages_skipped when there
was a writeback error (EIO, ENOSPC, EPERM due to bad osd credentials),
causing an oops in the writeback code shortly thereafter. Updating
pages_skipped on error isn't correct anyway, so let's just rip out this
(clearly broken) code to pass the wbc to the completion.
Signed-off-by: Sage Weil <sage@newdream.net>
Unregister and destroy the bdi in put_super, after mount is r/o, but before
put_anon_super releases the device name.
For symmetry, bdi_destroy in destroy_client (we bdi_init in create_client).
Only set s_bdi if bdi_register succeeds, since we use it to decide whether
to bdi_unregister.
Signed-off-by: Sage Weil <sage@newdream.net>
It's useless, since our allocations are already a power of 2. And it was
allocated per-instance (not globally), which caused a name collision when
we tried to mount a second file system with auth_x enabled.
Signed-off-by: Sage Weil <sage@newdream.net>
If a rename operation is resent to the MDS following an MDS restart, the
client does not get a full reply (containing the resulting metadata) back.
In that case, a ceph_rename() needs to compensate by doing anything useful
that fill_inode() would have, like d_move().
It also needs to invalidate the dentry (to workaround the vfs_rename_dir()
bug) and clear the dir complete flag, just like fill_trace().
Signed-off-by: Sage Weil <sage@newdream.net>
We can get old message seq #'s after a tcp reconnect for stateful sessions
(i.e., the MDS). If we get a higher seq #, that is an error, and we
shouldn't see any bad seq #'s for stateless (mon, osd) connections.
Signed-off-by: Sage Weil <sage@newdream.net>
The snap realm split was checking i_snap_realm, not the list_head, to
determine if an inode belonged in the new realm. The check always failed,
which meant we always moved the inode, corrupting the old realm's list and
causing various crashes.
Also wait to release old realm reference to avoid possibility of use after
free.
Signed-off-by: Sage Weil <sage@newdream.net>
d_move() reorders the d_subdirs list, breaking the readdir result caching.
Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on
rename.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: use separate class for ceph sockets' sk_lock
ceph: reserve one more caps space when doing readdir
ceph: queue_cap_snap should always queue dirty context
ceph: fix dentry reference leak in dcache readdir
ceph: decode v5 of osdmap (pool names) [protocol change]
ceph: fix ack counter reset on connection reset
ceph: fix leaked inode ref due to snap metadata writeback race
ceph: fix snap context reference leaks
ceph: allow writeback of snapped pages older than 'oldest' snapc
ceph: fix dentry rehashing on virtual .snap dir
Use a separate class for ceph sockets to prevent lockdep confusion.
Because ceph sockets only get passed kernel pointers, there is no
dependency from sk_lock -> mmap_sem. If we share the same class as other
sockets, lockdep detects a circular dependency from
mmap_sem (page fault) -> fs mutex -> sk_lock -> mmap_sem
because dependencies are noted from both ceph and user contexts. Using
a separate class prevents the sk_lock(ceph) -> mmap_sem dependency and
makes lockdep happy.
Signed-off-by: Sage Weil <sage@newdream.net>
We were missing space for the directory cap. The result was a BUG at
fs/ceph/caps.c:2178.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This simplifies the calling convention, and fixes a bug where we queue a
capsnap with a context other than i_head_snapc (the one that matches the
dirty pages). The result was a BUG at fs/ceph/caps.c:2178 on writeback
completion when a capsnap matching the writeback snapc could not be found.
Signed-off-by: Sage Weil <sage@newdream.net>
When filldir returned an error (e.g. buffer full for a large directory),
we would leak a dentry reference, causing an oops on umount.
Signed-off-by: Sage Weil <sage@newdream.net>
Teach the client to decode an updated format for the osdmap. The new
format includes pool names, which will be useful shortly. Get this change
in earlier rather than later.
Signed-off-by: Sage Weil <sage@newdream.net>
If in_seq_acked isn't reset along with in_seq, we don't ack received
messages until we reach the old count, consuming gobs memory on the other
end of the connection and introducing a large delay when those messages
are eventually deleted.
Signed-off-by: Sage Weil <sage@newdream.net>
We create a ceph_cap_snap if there is dirty cap metadata (for writeback to
mds) OR dirty pages (for writeback to osd). It is thus possible that the
metadata has been written back to the MDS but the OSD data has not when
the cap_snap is created. This results in a cap_snap with dirty(caps) == 0.
The problem is that cap writeback to the MDS isn't necessary, and a
FLUSHSNAP cap op gets no ack from the MDS. This leaves the cap_snap
attached to the inode along with its inode reference.
Fix the problem by dropping the cap_snap if it becomes 'complete' (all
pages written out) and dirty(caps) == 0 in ceph_put_wrbuffer_cap_refs().
Also, BUG() in __ceph_flush_snaps() if we encounter a cap_snap with
dirty(caps) == 0.
Signed-off-by: Sage Weil <sage@newdream.net>
The get_oldest_context() helper takes a reference to the returned snap
context, but most callers weren't dropping that reference. Fix them.
Also drop the unused locked __get_oldest_context() variant.
Signed-off-by: Sage Weil <sage@newdream.net>
On snap deletion, we don't regenerate ceph_cap_snaps for inodes with dirty
pages because deletion does not affect metadata writeback. However, we
did run into problems when we went to write back the pages because the
'oldest' snapc is determined by the oldest cap_snap, and that may be the
newer snapc that reflects the deletion. This caused confusion and an
infinite loop in ceph_update_writeable_page().
Change the snapc checks to allow writeback of any snapc that is equal to
OR older than the 'oldest' snapc.
When there are no cap_snaps, we were also using the realm's latest snapc
for writeback, which complicates ceph_put_wrbufffer_cap_refs(). Instead,
use i_head_snapc, the most snapc used for the most recent ('head') data.
This makes the writeback snapc (ceph_osd_request.r_snapc) _always_ match a
capsnap or i_head_snapc.
Also, in writepags_finish(), drop the snapc referenced by the _page_
and do not assume it matches the request snapc (it may not anymore).
Signed-off-by: Sage Weil <sage@newdream.net>
If a lookup fails on the magic .snap directory, we bind it to a magic
snap directory inode in ceph_lookup_finish(). That code assumes the dentry
is unhashed, but a recent server-side change started returning NULL leases
on lookup failure, causing the .snap dentry to be hashed and NULL by
ceph_fill_trace().
This causes dentry hash chain corruption, or a dies when d_rehash()
includes
BUG_ON(!d_unhashed(entry));
So, avoid processing the NULL dentry lease if it the dentry matches the
snapdir name in ceph_fill_trace(). That allows the lookup completion to
properly bind it to the snapdir inode. BUG there if dentry is hashed to
be sure.
Signed-off-by: Sage Weil <sage@newdream.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
There was a use after free in __unregister_request that would trigger
whenever the request map held the last reference. This appears to have
triggered an oops during 'umount -f' when requests are being torn down.
Signed-off-by: Sage Weil <sage@newdream.net>
Clear pointer to mds request after dropping the reference to
ensure we don't drop it again, as there is at least one error
path through this function that does not reset fi->last_readdir
to a new value.
Signed-off-by: Sage Weil <sage@newdream.net>
Fix a broken check that a reply came back from the same MDS we sent the
request to. I don't think a case that actually triggers this would ever
come up in practice, but it's clearly wrong and easy to fix.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Return ERR_PTR(-ENOMEM) if kmalloc() fails. We handle allocation
failures the same way later in the function.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Currently, if the wait_event_interruptible is interrupted, we
return EAGAIN unconditionally and loop, such that we aren't, in
fact, interruptible. So, propagate ERESTARTSYS if we get it.
Signed-off-by: Sage Weil <sage@newdream.net>
We were rebuilding the snap context when it was not necessary
(i.e. when the realm seq hadn't changed _and_ the parent seq
was still older), which caused page snapc pointers to not match
the realm's snapc pointer (even though the snap context itself
was identical). This confused begin_write and put it into an
endless loop.
The correct logic is: rebuild snapc if _my_ realm seq changed, or
if my parent realm's seq is newer than mine (and thus mine needs
to be rebuilt too).
Signed-off-by: Sage Weil <sage@newdream.net>
We get a fault callback on _every_ tcp connection fault. Normally, we
want to reopen the connection when that happens. If the address we have
is bad, however, and connection attempts always result in a connection
refused or similar error, explicitly closing and reopening the msgr
connection just prevents the messenger's backoff logic from kicking in.
The result can be a console full of
[ 3974.417106] ceph: osd11 10.3.14.138:6800 connection failed
[ 3974.423295] ceph: osd11 10.3.14.138:6800 connection failed
[ 3974.429709] ceph: osd11 10.3.14.138:6800 connection failed
Instead, if we get a fault, and have outstanding requests, but the osd
address hasn't changed and the connection never successfully connected in
the first place, do nothing to the osd connection. The messenger layer
will back off and retry periodically, because we never connected and thus
the lossy bit is not set.
Instead, touch each request's r_stamp so that handle_timeout can tell the
request is still alive and kicking.
Signed-off-by: Sage Weil <sage@newdream.net>
Make variable name slightly more generic, since it will (soon)
reflect either the time the request was sent OR the time it was
last determined to be still retrying.
Signed-off-by: Sage Weil <sage@newdream.net>
The messenger fault was clearing the BUSY bit, for reasons unclear. This
made it possible for the con->ops->fault function to reopen the connection,
and requeue work in the workqueue--even though the current thread was
already in con_work.
This avoids a problem where the client busy loops with connection failures
on an unreachable OSD, but doesn't address the root cause of that problem.
Signed-off-by: Sage Weil <sage@newdream.net>
Prevent duplicate 'mds0 caps stale' message from spamming the console every
few seconds while the MDS restarts. Set s_renew_requested earlier, so that
we only print the message once, even if we don't send an actual request.
Signed-off-by: Sage Weil <sage@newdream.net>
The incremental map decoding of pg pool updates wasn't skipping
the snaps and removed_snaps vectors. This caused osd requests
to stall when pool snapshots were created or fs snapshots were
deleted. Use a common helper for full and incremental map
decoders that decodes pools properly.
Signed-off-by: Sage Weil <sage@newdream.net>
The wait_unsafe_requests() helper dropped the mdsc mutex to wait
for each request to complete, and then examined r_node to get the
next request after retaking the lock. But the request completion
removes the request from the tree, so r_node was always undefined
at this point. Since it's a small race, it usually led to a
valid request, but not always. The result was an occasional
crash in rb_next() while dereferencing node->rb_left.
Fix this by clearing the rb_node when removing the request from
the request tree, and not walking off into the weeds when we
are done waiting for a request. Since the request we waited on
will _always_ be out of the request tree, take a ref on the next
request, in the hopes that it won't be. But if it is, it's ok:
we can start over from the beginning (and traverse over older read
requests again).
Signed-off-by: Sage Weil <sage@newdream.net>
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release
with MDS requests (e.g. setattr). We don't carry refs on most caps, so
this code worked most of the time, but for setattr (utimes) we try to
drop Fscr.
This causes cap state to get slightly out of sync with reality, and may
result in subsequent mds revoke messages getting ignored.
Fix by only releasing unused caps.
Signed-off-by: Sage Weil <sage@newdream.net>
Drop session mutex unconditionally in handle_cap_grant, and do the
check_caps from the handle_cap_grant helper. This avoids using a magic
return value.
Also avoid using a flag variable in the IMPORT case and call
check_caps at the appropriate point.
Signed-off-by: Sage Weil <sage@newdream.net>
Passing a session pointer to ceph_check_caps() used to mean it would leave
the session mutex locked. That wasn't always possible if it wasn't passed
CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a
differet session mutex, which was clearly wrong, and also emitted a
warning when it a racing CPU retook it and we did an unlock from the wrong
context.
This was only a problem when there was more than one MDS.
First, make ceph_check_caps unconditionally drop the session mutex, so that
it is free to lock other sessions as needed. Then adjust the one caller
that passes in a session (handle_cap_grant) accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>
This causes an oops when debug output is enabled and we kick
an osd request with no current r_osd (sometime after an osd
failure). Check the pointer before dereferencing.
Signed-off-by: Sage Weil <sage@newdream.net>
Previously we would decode state directly into our current ticket_handler.
This is problematic if for some reason we fail to decode, because we end
up with half new state and half old state.
We are probably already in bad shape if we get an update we can't decode,
but we may as well be tidy anyway. Decode into new_* temporaries and
update the ticket_handler only on success.
Signed-off-by: Sage Weil <sage@newdream.net>
Release the old ticket_blob buffer when we get an updated service ticket
from the monitor. Previously these were getting leaked.
Signed-off-by: Sage Weil <sage@newdream.net>
The buffer size was incorrectly calculated for the ceph_x_encrypt()
encapsulated ticket blob. Use a helper (with correct arithmetic) and
BUG out if we were wrong.
Signed-off-by: Sage Weil <sage@newdream.net>
We were failing to reconnect to services due to an old authenticator, even
though we had the new ticket, because we weren't properly retrying the
connect handshake, because we were calling an old/incorrect helper that
left in_base_pos incorrect. The result was a failure to reconnect to the
OSD or MDS (with an authentication error) if the MDS restarted after the
service had been up a few hours (long enough for the original authenticator
to be invalid). This was only a problem if the AUTH_X authentication was
enabled.
Now that the 'negotiate' and 'connect' stages are fully separated, we
should use the prepare_read_connect() helper instead, and remove the
obsolete one.
Signed-off-by: Sage Weil <sage@newdream.net>
When an inode was dropped while being migrated between two MDSs,
i_cap_exporting_issued was non-zero such that issue caps were non-zero and
__ceph_is_any_caps(ci) was true. This prevented the inode from being
removed from the snap realm, even as it was dropped from the cache.
Fix this by dropping any residual i_snap_realm ref in destroy_inode.
Signed-off-by: Sage Weil <sage@newdream.net>
All ci->i_snap_realm_item/realm->inodes_with_caps manipulation should be
protected by realm->inodes_with_caps_lock. This bug would have only bit
us in a rare race with a realm split (during some snap creations).
Signed-off-by: Sage Weil <sage@newdream.net>
Added assertion, and cleared one case where the implemented caps were
not following the issued caps.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This simplifies the process of timing out messages. We
keep lru of current messages that are in flight. If a
timeout has passed, we reset the osd connection, so that
messages will be retransmitted. This is a failsafe in case
we hit some sort of problem sending out message to the OSD.
Normally, we'll get notification via an updated osdmap if
there are problems.
If a request is older than the keepalive timeout, send a
keepalive to ensure we detect any breaks in the TCP connection.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The flush_dirty_caps() used to loop over the first entry of the cap_dirty
dirty list on the assumption that after calling ceph_check_caps() it would
be removed from the list. This isn't true for caps that are being
migrated between MDSs, where we've received the EXPORT but not the IMPORT.
Instead, do a safe list iteration, and pin the next inode on the list via
the CEPH_I_NOFLUSH flag.
Signed-off-by: Sage Weil <sage@newdream.net>
We should include caps that are mid-migration (we've received the EXPORT,
but not the IMPORT) in the issued caps set.
Signed-off-by: Sage Weil <sage@newdream.net>
Verify the file is actually open for the given caps when we are
waiting for caps. This ensures we will wake up and return EBADF
if another thread closes the file out from under us.
Note that EBADF is also the correct return code from write(2)
when called on a file handle opened for reading (although the
vfs should catch that).
Signed-off-by: Sage Weil <sage@newdream.net>
We didn't set the front length correctly. When messages used
the message pool we ended up with the conservative max (4 KB), and
the rest of the time the slightly less conservative estimate. Even
though the OSD ignores the extra data, set it to the right value to avoid
sending extra data over the network.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Reset msg front len when a message is returned to the pool: the caller
may have changed it.
BUG if we try to send a message with a hdr.front_len that doesn't match
the front iov.
Signed-off-by: Sage Weil <sage@newdream.net>
This was simply broken. Apparently at some point we thought about putting
the snaptrace in the middle section, but didn't.
Signed-off-by: Sage Weil <sage@newdream.net>
Clear LOSSYTX bit, so that if/when we reconnect, said reconnect
will retry on failure.
Clear _PENDING bits too, to avoid polluting subsequent
connection state.
Drop unused REGISTERED bit.
Signed-off-by: Sage Weil <sage@newdream.net>
Move any out_sent messages to out_queue _before_ checking if
out_queue is empty and going to STANDBY, or else we may drop
something that was never acked.
And clean up the code a bit (less goto).
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes lock ABBA inversion, as the ->invalidate_authorizer()
op may need to take a lock (or even call back into the
messenger).
Signed-off-by: Sage Weil <sage@newdream.net>
The tid is in the message header, not body. Broken since 6df058c0.
No need to look at next mds session; just mark the request and be done.
(The old error path was broken too, but now it's gone.)
Signed-off-by: Sage Weil <sage@newdream.net>
Verify the mds session is currently registered before handling
incoming messages. Clean up message handlers to pull mds out
of session->s_mds instead of less trustworthy src field.
Clean up con_{get,put} debug output.
Signed-off-by: Sage Weil <sage@newdream.net>
The destroy_inode path needs no inode locks since there are no
inode references. Update __ceph_remove_cap comment to reflect
that it is called without cap->session->s_mutex in this case.
Signed-off-by: Sage Weil <sage@newdream.net>
There is no state in local vars that requires us to loop after temporarily
dropping i_lock.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Instead of truncating the whole range of pages, we skip those
pages that are dirty or in the middle of writeback. Those pages
will be cleared later when the writeback completes.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This page should have been removed earlier when the cache cap was
revoked, but a writeback was in flight, so it was skipped. We truncate
it here just as the writeback finishes, while it's still locked.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We need to know whether there was any page left behind, and not the
return value (the total number of pages invalidated). Look at the mapping
to see if we were successful or not.
Move it all into a helper to simplify the two callers.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Since we can now create and destroy pg pools, the pool ids will be sparse,
and an array no longer makes sense for looking up by pool id. Use an
rbtree instead.
The OSDMap encoding also no longer has a max pool count (previously used to
allocate the array). There is a new pool_max, that is the largest pool id
we've ever used, although we don't actually need it in the client.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil