Currently xfs_ino_t is defined as a u64 which can either be an unsigned
long long or on some 64 bit platforms and unsigned long. Just making
it and unsigned long long mean's it's still always 64 bits wide, but we
don't need to resort to cases to print it.
Fixes a warning regression on 64 bit powerpc in current git.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
John Stanley reported EOVERFLOW errors in readdir from his self-build
glibc. I traced this down to glibc enabling d_off overflow checks
in one of the about five million different getdents implementations.
In 2.6.28 Dave Woodhouse moved our readdir double buffering required
for NFS4 readdirplus into nfsd and at that point we lost the capping
of the directory offsets to 32 bit signed values. Johns glibc used
getdents64 to even implement readdir for normal 32 bit offset dirents,
and failed with EOVERFLOW only if this happens on the first dirent in
a getdents call. I managed to come up with a testcase that uses
raw getdents and does the EOVERFLOW check manually. We always hit
it with our last entry due to the special end of directory marker.
The patch below is a dumb version of just putting back the masking,
to make sure we have the same behavior as in 2.6.27 and earlier.
I will work on a better and cleaner fix for 2.6.30.
Reported-by: John Stanley <jpsinthemix@verizon.net>
Tested-by: John Stanley <jpsinthemix@verizon.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change the left/right variables to the proper always 64bit xfs_dfsbo_t
type because otherwise compilation fails for Geert on m68k without
CONFIG_LBD:
| fs/xfs/xfs_btree.c: In function 'xfs_btree_readahead_lblock':
| fs/xfs/xfs_btree.c:736: warning: comparison is always true due to limited range of data type
| fs/xfs/xfs_btree.c:741: warning: comparison is always true due to limited range of data type
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
NFS clients or users of the handle ioctls can pass us arbitrary inode
numbers through the exportfs interface. Make sure we use the
XFS_IGET_BULKSTAT so that these don't cause shutdowns due to the corruption
checks. Also translate the EINVAL we get back for invalid inode clusters
into an ESTALE which is more appropinquate, and remove the useless check
for a NULL inode on a successfull xfs_iget return.
I have a testcase to reproduce this using the handle interface which
I will submit to xfsqa.
Reported-by: Mario Becroft <mb@gem.win.co.nz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Implement XFS's large buffer support with the new vmap APIs. See the vmap
rewrite (db64fe02) for some numbers. The biggest improvement that comes from
using the new APIs is avoiding the global KVA allocation lock on every call.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS's vmap batching simply defers a number (up to 64) of vunmaps, and keeps
track of them in a list. To purge the batch, it just goes through the list and
calls vunamp on each one. This is pretty poor: a global TLB flush is generally
still performed on each vunmap, with the most expensive parts of the operation
being the broadcast IPIs and locking involved in the SMP callouts, and the
locking involved in the vmap management -- none of these are avoided by just
batching up the calls. I'm actually surprised it ever made much difference.
(Now that the lazy vmap allocator is upstream, this description is not quite
right, but the vunmap batching still doesn't seem to do much)
Rip all this logic out of XFS completely. I will improve vmap performance
and scalability directly in subsequent patch.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The iolock is dropped and re-acquired around the call to XFS_SEND_NAMESP().
While the iolock is released the file can become cached. We then
'goto retry' and - if we are doing direct I/O - mapping->nrpages may now be
non zero but need_i_mutex will be zero and we will hit the WARN_ON().
Since we have dropped the I/O lock then the file size may have also changed
so what we need to do here is 'goto start' like we do for the XFS_SEND_DATA()
DMAPI event.
We also need to update the filesize before releasing the iolock so that
needs to be done before the XFS_SEND_NAMESP event. If we drop the iolock
before setting the filesize we could race with a truncate.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In libxfs xfs_bmbt_disk_get_all needs to handle unaligned data and thus
has been updated to use get_unaligned_be64. In kernelspace we don't strictly
need it as the routine is only used for tracing and xfsidbg, but let's keep
the two implementations in sync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_fs_vcmn_err can be called under a spinlock, but does a sleeping memory
allocation to create buffer for it's internal sprintf. Fortunately it's
the only caller of icmn_err, so we can merge the two and have one single
static buffer and spinlock protecting it. While we're at it make sure
we proper __attribute__ format annotations so that the compiler can detect
mismatched format strings.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Speculative allocation beyond eof doesn't work properly. It was
broken some time ago after a code cleanup that moved what is now
xfs_iomap_eof_align_last_fsb() and xfs_iomap_eof_want_preallocate()
out of xfs_iomap_write_delay() into separate functions. The code
used to use the current file size in various checks but got changed
to be max(file_size, i_new_size). Since i_new_size is the result
of 'offset + count' then in xfs_iomap_eof_want_preallocate() the
check for '(offset + count) <= isize' will always be true.
ie if 'offset + count' is > ip->i_size then isize will be i_new_size
and equal to 'offset + count'.
This change fixes all the places that used to use the current file
size.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We should be using the incore inode size here not the linux inode
size. The incore inode size is always up to date for directories
whereas the linux inode size is not updated for directories.
We've hit assertions in xfs_bmap() and traced it back to the linux
inode size being zero but the incore size being correct.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Preserve any error returned by the bio layer.
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Instead of implementing our own checks use inode_change_ok to check for
necessary permission in setattr. There is a slight change in behaviour
as inode_change_ok doesn't allow i_mode updates to add the suid or sgid
without superuser privilegues while the old XFS code just stripped away
those bits from the file mode.
(First sent on Semptember 29th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS has a mode called invisble I/O that doesn't update any of the
timestamps. It's used for HSM-style applications and exposed through
the nasty open by handle ioctl.
Instead of doing directly assignment of file operations that set an
internal flag for it add a new FMODE_NOCMTIME flag that we can check
in the normal file operations.
(addition of the generic VFS flag has been ACKed by Al as an interims
solution)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- xfs_sb.h add the XFS_SB_VERSION2_PARENTBIT features2 that has been
around in userspace for some time
- xfs_inode.h: move a few things out of __KERNEL__ that are needed by
userspace
- xfs_mount.h: only include xfs_sync.h under __KERNEL__
- xfs_inode.c: minor whitespace fixup. I accidentaly changes this when
importing this file for use by userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Check for the project ID after attaching all inodes to the transaction.
That way the unlock in the error case is done by the transaction subsystem,
which guaratees that is uses the right flags (which was wrong from day one
of this check), and avoids having special code unlocking an array of inodes
with potential duplicates. Attaching the inode first is the method used
by xfs_rename and the other namespace methods all other error that require
multiple locked inodes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the b_fspriv pointer and it's ugly accessors with a properly types
xfs_mount pointer. Also switch log reocvery over to it instead of using
b_fspriv for the mount pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
None of this code appears to be used anywhere so remove it.
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When project quota is active and is being used for directory tree
quota control, we disallow rename outside the current directory
tree. This requires a check to be made after all the inodes
involved in the rename are locked. We fail to unlock the inodes
correctly if we disallow the rename when the target is outside the
current directory tree. This results in a hang on the next access
to the inodes involved in failed rename.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Hit this assert because an inode was tagged with XFS_ICI_RECLAIM_TAG but
not XFS_IRECLAIMABLE|XFS_IRECLAIM. This is because xfs_iget_cache_hit()
first clears XFS_IRECLAIMABLE and then calls __xfs_inode_clear_reclaim_tag()
while only holding the pag_ici_lock in read mode so we can race with
xfs_reclaim_inodes_ag(). Looks like xfs_reclaim_inodes_ag() will do the
right thing anyway so just remove the assert.
Thanks to Christoph for pointing out where the problem was.
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
entries_size is probably left over from when we used to pass the
size to kmem_free().
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
We check the return value of all other calls to xfs_buf_get_noaddr().
Make sense to do it here too.
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
When project quota is active and is being used for directory tree
quota control, we disallow rename outside the current directory
tree. This requires a check to be made after all the inodes
involved in the rename are locked. We fail to unlock the inodes
correctly if we disallow the rename when the target is outside the
current directory tree. This results in a hang on the next access
to the inodes involved in failed rename.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move the inode tracing into xfs_iget.c / xfs_inode.h and kill xfs_vnode.c
now that it's empty.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The whole machinery to wait on I/O completion is related to the I/O path
and should be there instead of in xfs_vnode.c. Also give the functions
more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There's just one caller of this helper, and it's much cleaner to just merge
the xfs_do_force_shutdown call into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There's almost nothing left in this function, instead remove the IRELE
on the real times inodes and the call to XFS_QM_UNMOUNT into xfs_unmountfs.
For the regular unmount case that means it now also happenes after dmapi
notification, but otherwise there is no difference in behaviour.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Currently we explicitly call xfs_iflush on the quota, real-time and root
inodes from xfs_unmount_flush. But we just called xfs_sync_inodes with
SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes
are on disk already, so there is no need for these special cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Use xfs_trans_ijoin in xfs_trans_iget in case we need to join an inode into
a transaction instead of opencoding it. Based on a discussion with and an
incomplete patch from Niv Sardi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
We never supported shared read-only filesystems, so remove the dead
code left over from IRIX for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There are a few inode flags around that aren't used anywhere, so remove
them. Also update xfsidbg to display all used inode flags correctly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The various inlines in xfs_sb.h that deal with the superblock version
and fature flags were converted from macros a while ago, and this
show by the odd coding style full of useless braces and backslashes
and the avoidance of conditionals.
Clean these up to look like normal C code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
All but one caller of xlog_state_want_sync drop and re-acquire
l_icloglock around the call to it, just so that xlog_state_want_sync can
acquire and drop it.
Move all lock operation out of l_icloglock and assert that the lock is
held when it is called.
Note that it would make sense to extende this scheme to
xlog_state_release_iclog, but the locking in there is more complicated
and we'd like to keep the atomic_dec_and_lock optmization for those
callers not having l_icloglock yet.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
->link is guranteed to get an already reference inode passed so we
can do a simple increment of i_count instead of using igrab and thus
avoid banging on the global inode_lock. This is what most filesystems
already do.
Also move the increment after the call to xfs_link to simplify error
handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_buf_iostart is a "shared" helper for xfs_buf_read_flags,
xfs_bawrite, and xfs_bdwrite - except that there isn't much shared
code but rather special cases for each caller.
So remove this function and move the functionality to the caller.
xfs_bawrite and xfs_bdwrite are now big enough to be moved out of
line and the xfs_buf_read_flags is moved into a new helper called
_xfs_buf_read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Merge xfs_iextract and xfs_idestroy into xfs_ireclaim as they are never
called individually. Also rewrite most comments in this area as they
were severly out of date.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
When mnt_want_write was introduced a call to it was added around
xfs_ichgtime, but there is no need for this because a file can't be open
read/write on a r/o mount, and a mount can't degrade r/o while we still
have files open for writing. As the mnt_want_write changes were never
merged into the CVS tree this patch is for mainline only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The recent compat patches make xfs_file.c include xfs_ioctl32.h unconditional,
which breaks the build on 32 bit systems which don't have the various compat
defintions.
Remove the include and move the defintion of xfs_file_compat_ioctl to
xfs_ioctl.h so that we can avoid including all the compat defintions in
xfs_file.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Put things in IMHO a more readable order, now
that it's all done; add some comments.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a compat handler for XFS_IOC_FSSETDM_BY_HANDLE.
I haven't tested this, lacking dmapi tools to do so
(unless xfsqa magically gets this somehow?)
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a compat handler for XFS_IOC_ATTRMULTI_BY_HANDLE
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a compat handler for XFS_IOC_ATTRLIST_BY_HANDLE
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The XFS_IOC_FSBULKSTAT_SINGLE ioctl passes in the
desired inode number, while XFS_IOC_FSBULKSTAT passes
in the previous/last-stat'd inode number. The
compat handler wasn't differentiating these, so
when a XFS_IOC_FSBULKSTAT_SINGLE request for inode
128 was sent in, stat information for 131 was sent out.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The 32-bit xfs_blkstat_one handler was failing because
a size check checked whether the remaining (32-bit)
user buffer was less than the (64-bit) bulkstat buffer,
and failed with ENOMEM if so. Move this check
into the respective handlers so that they check the
correct sizes.
Also, the formatters were returning negative errors
or positive bytes copied; this was odd in the positive
error value world of xfs, and handled wrong by at least
some of the callers, which treated the bytes returned
as an error value. Move the bytes-used assignment
into the formatters.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently the compat formatter was handled by passing
in "private_data" for the xfs_bulkstat_one formatter,
which was really just another formatter... IMHO this
got confusing.
Instead, just make a new xfs_bulkstat_one_compat
formatter for xfs_bulkstat, and call it via a wrapper.
Also, don't translate the ioctl nrs into their native
counterparts, that just clouds the issue; we're in a
compat handler anyway, just switch on the 32-bit cmds.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The args for XFS_IOC_FSGROWFSDATA and XFS_IOC_FSGROWFSRTA
have padding on the end on intel, so add arg copyin functions,
and then just call the growfs ioctl helpers.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The big hitter here was the bstat field, which contains
different sized time_t on 32 vs. 64 bit. Add a copyin
function to translate the 32-bit arg to 64-bit, and
call the swapext ioctl helper.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Create a new xfs_ioctl.h file which has prototypes for
ioctl helpers that may be called in compat mode.
Change several compat ioctl cases which are IOW to simply copy
in the userspace argument, then call the common ioctl helper.
This also fixes xfs_compat_ioc_fsgeometry_v1(), which had
it backwards before; it copied in an (empty) arg, then copied
out the native result, which probably corrupted userspace. It
should be translating on the copyout.
Also, a bit of formatting cleanup for consistency, and conversion
of all error returns to use XFS_ERROR().
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This makes the c file less cluttered and a bit more
readable. Consistently name the ioctl number
macros with "_32" and the compatibility stuctures
with "_compat." Rename the helpers which simply
copy in the arg with "_copyin" for easy identification.
Finally, for a few of the existing helpers, modify them
so that they directly call the native ioctl helper
after userspace argument fixup.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Moving the copy_from_user out of some of the ioctl helpers will
make it easier for the compat ioctl switch to copy in the right
struct, then just pass to the underlying helper.
Also, move common access checks into the helpers themselves,
and out of the native ioctl switch code, to reduce code
duplication between native & compat ioctl callers.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we fail after xfs_iget we have to drop the reference count, spotted
by Dave Chinner. Also remove some useless asserts and stop trying to
deal with di_mode == 0 inodes because never gets those without passing
the IGET_CREATE flag to xfs_iget.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Allocate the inode in xfs_iget_cache_miss and pass it into xfs_iread. This
simplifies the error handling and allows xfs_iread to be shared with userspace
which already uses these semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Just pass down the XFS_IGET_* flags all the way down to xfs_imap instead
of translating them mid-way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Most uses of struct xfs_imap are to map and inode to a buffer. To avoid
copying around the inode location information we should just embedd a
strcut xfs_imap into the xfs_inode. To make sure it doesn't bloat an
inode the im_len is changed to a ushort, which is fine as that's what
the users exepect anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_imap is the only caller of xfs_dilocate and doesn't add any significant
value. Merge the two functions and document the various cases we have for
inode cluster lookup in the new xfs_imap.
Also remove the unused im_agblkno and im_ioffset fields from struct xfs_imap
while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
We have removed the support for old-style inode items a while ago and
xlog_recover_do_inode_trans is now only called for XFS_LI_INODE items.
That means we can remove the call to xfs_imap there and with it the
XFS_IMAP_LOOKUP that is set by all other callers. We can also mark
xfs_imap static now.
(First sent on October 21st)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only caller of xfs_itobp that doesn't have i_blkno setup is now
the initial inode read. It needs access to the whole xfs_imap so using
xfs_inotobp is not an option. Instead opencode the buffer lookup in
xfs_iread and kill all the functionality for the initial map from
xfs_itobp.
(First sent on October 21st)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Split out the body of the main loop into a separate helper to make the
code readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
These names don't add any value at all over just using the numerical
values.
(First sent on October 9th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Now that we have a separate xfs_icdinode_t for the in-core inode which
gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core
split - the fact that part of the structure gets logged through the inode
log item and a small part not can better be described in a comment.
All sizeof operations on the dinode_core either really wanted the
icdinode and are switched to that one, or had already added the size
of the agi unlinked list pointer. Later both will be replaced with
helpers once we get the larger CRC-enabled dinode.
Removing the data and attribute fork unions also has the advantage that
xfs_dinode.h doesn't need to pull in every header under the sun.
While we're at it also add some more comments describing the dinode
structure.
(First sent on October 7th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_ialloc_log_di is only used to log the full inode core + di_next_unlinked.
That means all the offset magic is not nessecary and we can simply use
xfs_trans_log_buf directly. Also add a comment describing what we should do
here instead.
(First sent on October 7th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Move all fields from xlog_iclog_fields_t into xlog_in_core_t instead of having
them in a substructure and the using #defines to make it look like they were
directly in xlog_in_core_t. Also document that xlog_in_core_2_t is grossly
misnamed, and make all references to it typesafe.
(First sent on Semptember 15th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Add a helper to read the AGF header and perform basic verification.
Based on hunks from a larger patch from Dave Chinner.
(First sent on Juli 23rd)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Add a helper to read the AGI header and perform basic verification.
Based on hunks from a larger patch from Dave Chinner.
(First sent on Juli 23rd)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
i_gen is incremented in directory operations when the
directory is changed. It is never read or otherwise used
so it should be removed to help reduce the size of the
struct xfs_inode.
The patch also removes a duplicate logging of the directory
inode core. We only need to do this once per transaction
so kill the one associated with the i_gen increment.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only thing left is xfs_do_force_shutdown which already has a defintion
in xfs_mount.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only thing left are the forced shutdown flags and freeze macros which
fit into xfs_mount.h much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
This adds the fiemap inode_operation, which for us converts the
fiemap values & flags into a getbmapx structure which can be sent
to xfs_getbmap. The formatter then copies the bmv array back into
the user's fiemap buffer via the fiemap helpers.
If we wanted to be more clever, we could also return mapping data
for in-inode attributes, but I'm not terribly motivated to do that
just yet.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
This adds a new output flag, BMV_OF_LAST to indicate if we've hit
the last extent in the inode. This potentially saves an extra call
from userspace to see when the whole mapping is done.
It also adds BMV_IF_DELALLOC and BMV_OF_DELALLOC to request, and
indicate, delayed-allocation extents. In this case bmv_block
is set to -2 (-1 was already taken for HOLESTARTBLOCK; unfortunately
these are the reverse of the in-kernel constants.)
These new flags facilitate addition of the new fiemap interface.
Rather than adding sh_delalloc, remove sh_unwritten & just test
the flags directly.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Preliminary work to hook up fiemap, this allows us to pass in an
arbitrary formatter to copy extent data back to userspace.
The formatter takes info for 1 extent, a pointer to the user "thing*"
and a pointer to a "filled" variable to indicate whether a userspace
buffer did get filled in (for fiemap, hole "extents" are skipped).
I'm just using the getbmapx struct as a "common denominator" because
as far as I can see, it holds all info that any formatters will care
about.
("*thing" because fiemap doesn't pass the user pointer around, but rather
has a pointer to a fiemap info structure, and helpers associated with it)
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
gcc is warning about an uninitialised variable in xfs_growfs_rt().
This is a false positive. Fix it by changing the scope of the
transaction pointer to wholly within the internal loop inside
the function.
While there, preemptively change xfs_growfs_rt_alloc() in the
same way as it has exactly the same structure as xfs_growfs_rt()
but gcc is not warning about it. Yet.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
XFS gets the sign of the error wrong in several places when
gathering the error from generic linux functions. These functions
return negative error values, while the core XFS code returns
positive error values. Hence when XFS inverts the error to be
returned to the VFS, it can incorrectly invert a negative
error and this error will be ignored by the syscall return.
Fix all the problems related to calling filemap_* functions.
Problem initially identified by Nick Piggin in xfs_fsync().
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Some recent gcc warnings don't like passing string variables to
printf-like functions without using at least a "%s" format string.
Change the two occurances of that in xfs to please gcc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Now that we've stopped using the Linux inode cache when can trivally
support the inode64 mount option on 32bit architectures. As far as the
kernel and most userspace is concerned this works perfectly, but
applications still using really old stat and readdir interfaces will get
an EOVERFLOW error when hitting an inode number not fitting into 32
bits (that problem of course also exists when using these applications
on a 64bit kernel).
Note that because inode64 is simply a mount option we can currently
mount a filesystem having > 32 bit inode numbers and cause a variety of
problems, all this is solved but this patch which enables XFS_BIG_INUMS,
even when inode64 is not used.
(First sent on October 18th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Currently there's no ->open method set for directories on XFS. That
means we don't perform any check for opening too large directories
without O_LARGEFILE, we don't check for shut down filesystems, and we
don't actually do the readahead for the first block in the directory.
Instead of just setting the directories open routine to xfs_file_open
we merge the shutdown check directly into xfs_file_open and create
a new xfs_dir_open that first calls xfs_file_open and then performs
the readahead for block 0.
(First sent on September 29th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_log_force_umount may be called very early during log recovery where
If we fail a buffer read in xlog_recover_do_inode_trans we abort the mount.
But at that point log recovery has started delayed writeback of inode
buffers. As part of the aborted mount we try to flush out all delwri
buffers, but at that point we have already freed the superblock, and set
mp->m_sb_bp to NULL, and xfs_log_force_umount which gets called after
the inode buffer writeback trips over it.
Make xfs_log_force_umount a little more careful when accessing mp->m_sb_bp
to avoid this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.
Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.
Credit to Nick Piggin for tripping over the problem.
SGI-PV: 989741
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Pass credentials through dentry_open() so that the COW creds patch can have
SELinux's flush_unauthorized_files() pass the appropriate creds back to itself
when it opens its null chardev.
The security_dentry_open() call also now takes a creds pointer, as does the
dentry_open hook in struct security_operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: xfs@oss.sgi.com
Signed-off-by: James Morris <jmorris@namei.org>
When we are about to add a new item to a transaction in recovery, we need
to check that it is valid first. Currently we just assert that header
magic number matches, but in production systems that is not present and we
add a corrupted transaction to the list to be processed. This results in a
kernel oops later when processing the corrupted transaction.
Instead, if we detect a corrupted transaction, abort recovery and leave
the user to clean up the mess that has occurred.
SGI-PV: 988145
SGI-Modid: xfs-linux-melb:xfs-kern:32356a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When there is no memory left in the system, xfs_buf_get_noaddr()
can fail. If this happens at mount time during xlog_alloc_log()
we fail to catch the error and oops.
Catch the error from xfs_buf_get_noaddr(), and allow other memory
allocations to fail and catch those errors too. Report the error
to the console and fail the mount with ENOMEM.
Tested by manually injecting errors into xfs_buf_get_noaddr() and
xlog_alloc_log().
Version 2:
o remove unnecessary casts of the returned pointer from kmem_zalloc()
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we create a directory, we reserve a number of blocks for the maximum
possible expansion of of the directory due to various btree splits,
freespace allocation, etc. Unfortunately, each allocation is not reflected
in the total number of blocks still available to the transaction, so the
maximal reservation is used over and over again.
This leads to problems where an allocation group has only enough blocks
for *some* of the allocations required for the directory modification.
After the first N allocations, the remaining blocks in the allocation
group drops below the total reservation, and subsequent allocations fail
because the allocator will not allow the allocation to proceed if the AG
does not have the enough blocks available for the entire allocation total.
This results in an ENOSPC occurring after an allocation has already
occurred. This results in aborting the directory operation (leaving the
directory in an inconsistent state) and cancelling a dirty transaction,
which results in a filesystem shutdown.
Avoid the problem by reflecting the number of blocks allocated in any
directory expansion in the total number of blocks available to the
modification in progress. This prevents a directory modification from
being aborted part way through with an ENOSPC.
SGI-PV: 988144
SGI-Modid: xfs-linux-melb:xfs-kern:32340a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's possible to have outstanding xfs_ioend_t's queued when the file size
is zero. This can happen in the direct I/O path when a direct I/O write
fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie
xfs_end_io_direct() does not know that the I/O failed so can't force the
xfs_ioend_t to be flushed synchronously).
When we truncate a file on unlink we don't know to wait for these
xfs_ioend_ts and we can have a use-after-free situation if the inode is
reclaimed before the xfs_ioend_t is finally processed.
As was suggested by Dave Chinner lets wait for all I/Os to complete when
truncating the file size to zero.
SGI-PV: 981668
SGI-Modid: xfs-linux-melb:xfs-kern:32216a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Destroying the quota stuff on unmount can access the log - ie
XFS_QM_DONE() ends up in xfs_dqunlock() which calls
xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the
log has already been destroyed. Just move the cleanup of the quota code
earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving
XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot.
SGI-PV: 987086
SGI-Modid: xfs-linux-melb:xfs-kern:32148a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes()
can find inodes that are still undergoing initialisation. Avoid
them by checking for the the XFS_INEW() flag once we have a reference
on the inode. This flag is cleared once the inode is properly initialised.
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
gcc on ARM warns about an using an uninitialised variable
in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc
on x86_64 is not reporting this warning so it went unnoticed.
Fix the bug by bring the inode radix tree walk code up to
date with xfs_sync_inodes_ag().
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When there is no memory left in the system, xfs_buf_get_noaddr()
can fail. If this happens at mount time during xlog_alloc_log()
we fail to catch the error and oops.
Catch the error from xfs_buf_get_noaddr(), and allow other memory
allocations to fail and catch those errors too. Report the error
to the console and fail the mount with ENOMEM.
Tested by manually injecting errors into xfs_buf_get_noaddr() and
xlog_alloc_log().
Version 2:
o remove unnecessary casts of the returned pointer from kmem_zalloc()
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
If we get a race looking up a reclaimable inode, we can end up with the
winner proceeding to use the inode before it has been completely
re-initialised. This is a Bad Thing.
Fix the race by checking whether we are still initialising the inod eonce
we have a reference to it, and if so wait for the initialisation to
complete before continuing.
While there, fix a leaked reference count in the same code when
encountering an unlinked inode and we are not doing a lookup for a create
operation.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32429a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On Linux all filesystems are supposed to be operating under Posix'
restricted chown. Restricted chown means it restricts chown to the owner
unless you have CAP_FOWNER.
NOTE: that 2 files outside of fs/xfs have been modified too for this
change.
Reviewed-by: Dave Chinner <david@fromorbit.com>
SGI-PV: 988919
SGI-Modid: xfs-linux-melb:xfs-kern:32413a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
capable_cred has been unused for a while so we can kill it and sys_cred.
That also means the cred argument to xfs_setattr and xfs_change_file_space
can be removed now.
SGI-PV: 988918
SGI-Modid: xfs-linux-melb:xfs-kern:32412a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Under heavy metadata load we are seeing log hangs. The AIL has items in it
ready to be pushed, and they are within the push target window. However,
we are not pushing them when the last pushed LSN is less than the LSN of
the first log item on the AIL. This is a regression introduced by the AIL
push cursor modifications.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32409a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
To make sure we free the security data inodes need to be freed using the
proper VFS helper (which we also need to export for this). We mark these
inodes bad so we can skip the flush path for them.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32398a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bulkstat only wants the dinode, offset and buffer from a given inode
number. Instead of using xfs_itobp on a fake inode which is complicated
and currently leads to leaks of the security data just use xfs_inotobp
which is designed to do exactly the kind of lookup xfs_bulkstat wants. The
only thing that's missing in xfs_inotobp is a flags paramter that let's us
pass down XFS_IMAP_BULKSTAT, but that can easily added.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32397a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
If we are syncing data in xfs_sync_inodes_ag(), the VFS inode must still
be referencable as the dirty data state is carried on the VFS inode. hence
if we can't get a reference via igrab(), the inode must be in reclaim
which implies that it has no dirty data attached.
Leave such inodes to the reclaim code to flush the dirty inode state to
disk and so avoid attempting to access the VFS inode when it may not exist
in xfs_sync_inodes_ag().
Version 4:
o don't reference linux inode until after igrab() succeeds
Version 3:
o converted unlock/rele to an xfs_iput() call.
Version 2:
o change igrab logic to be more linear
o remove initial reclaimable inode check now that we are using
igrab() failure to find reclaimable inodes
o assert that igrab failure occurs only on reclaimable inodes
o clean up inode locking - only grab the iolock if we are doing
a SYNC_DELWRI call and we have a dirty inode.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32391a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we are inside a radix tree preload region, we cannot sleep. Recently
we moved the inode locking inside the preload region for the inode radix
tree. Fix that, and fix a missed unlock in another error path in the same
code at the same time.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32385a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The dp to ip comment should be for the unconditional xfs_droplink call,
and the "." link obviously only exists for directories, so it should be in
the is_dir conditional.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32374a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
iosizelog shouldn't be the same as iosize but the logarithm of it. Then
again the current biosize option doesn't make much sense to me as it
doesn't set the preferred I/O size as mentioned in the comment next to it
but rather the allocation size and thus is identical to the allocsize
option (except for the missing logarithm). It's also not documented in
Documentation/filesystems/xfs.txt or the mount manpage.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32373a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Noquota should clear all mount options, and not just user and group quota.
Probably doesn't matter very much in real life.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32372a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
No need to parse the mount option into a structure before applying it to
struct xfs_mount.
The content of xfs_start_flags gets merged into xfs_parseargs. Calls
inbetween don't care and can use mount members instead of the args struct.
This patch uncovered that the mount option for shared filesystems wasn't
ever exposed on Linux. The code to handle it is #if 0'ed in this patch
pending a decision on this feature. I'll send a writeup about it to the
list soon.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32371a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we are about to add a new item to a transaction in recovery, we need
to check that it is valid first. Currently we just assert that header
magic number matches, but in production systems that is not present and we
add a corrupted transaction to the list to be processed. This results in a
kernel oops later when processing the corrupted transaction.
Instead, if we detect a corrupted transaction, abort recovery and leave
the user to clean up the mess that has occurred.
SGI-PV: 988145
SGI-Modid: xfs-linux-melb:xfs-kern:32356a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Add an xfs_ail pointer to log items so that the log items can reference
the AIL directly during callbacks without needed a struct xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32352a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
When we need to go from the log to the AIL, we have to go via the
xfs_mount. Add a xfs_ail pointer to the log so we can go directly to the
AIL associated with the log.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32351a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32350a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
When copying lsn's from the log item to the inode or dquot flush lsn, we
currently grab the AIL lock. We do this because the LSN is a 64 bit
quantity and it needs to be read atomically. The lock is used to guarantee
atomicity for 32 bit platforms.
Make the LSN copying a small function, and make the function used
conditional on BITS_PER_LONG so that 64 bit machines don't need to take
the AIL lock in these places.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32349a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
With the new cursor interface, it makes sense to make all the traversing
code use the cursor interface and make the old one go away. This means
more of the AIL interfacing is done by passing struct xfs_ail pointers
around the place instead of struct xfs_mount pointers.
We can replace the use of xfs_trans_first_ail() in xfs_log_need_covered()
as it is only checking if the AIL is empty. We can do that with a call to
xfs_trans_ail_tail() instead, where a zero LSN returned indicates and
empty AIL...
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32348a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To replace the current generation number ensuring sanity of the AIL
traversal, replace it with an external cursor that is linked to the AIL.
Basically, we store the next item in the cursor whenever we want to drop
the AIL lock to do something to the current item. When we regain the lock.
the current item may already be free, so we can't reference it, but the
next item in the traversal is already held in the cursor.
When we move or delete an object, we search all the active cursors and if
there is an item match we clear the cursor(s) that point to the object.
This forces the traversal to restart transparently.
We don't invalidate the cursor on insert because the cursor still points
to a valid item. If the intem is inserted between the current item and the
cursor it does not matter; the traversal is considered to be past the
insertion point so it will be picked up in the next traversal.
Hence traversal restarts pretty much disappear altogether with this method
of traversal, which should substantially reduce the overhead of pushing on
a busy AIL.
Version 2 o add restart logic o comment cursor interface o minor cleanups
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32347a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Rather than embedding the struct xfs_ail in the struct xfs_mount, allocate
it during AIL initialisation. Add a back pointer to the struct xfs_ail so
that we can pass around the xfs_ail and still be able to access the
xfs_mount if need be. This is th first step involved in isolating the AIL
implementation from the surrounding filesystem code.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32346a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
When we create a directory, we reserve a number of blocks for the maximum
possible expansion of of the directory due to various btree splits,
freespace allocation, etc. Unfortunately, each allocation is not reflected
in the total number of blocks still available to the transaction, so the
maximal reservation is used over and over again.
This leads to problems where an allocation group has only enough blocks
for *some* of the allocations required for the directory modification.
After the first N allocations, the remaining blocks in the allocation
group drops below the total reservation, and subsequent allocations fail
because the allocator will not allow the allocation to proceed if the AG
does not have the enough blocks available for the entire allocation total.
This results in an ENOSPC occurring after an allocation has already
occurred. This results in aborting the directory operation (leaving the
directory in an inconsistent state) and cancelling a dirty transaction,
which results in a filesystem shutdown.
Avoid the problem by reflecting the number of blocks allocated in any
directory expansion in the total number of blocks available to the
modification in progress. This prevents a directory modification from
being aborted part way through with an ENOSPC.
SGI-PV: 988144
SGI-Modid: xfs-linux-melb:xfs-kern:32340a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If the last block of the AG has inodes in it and the AG is an exactly
power-of-2 size then the last inode in the AG points to the last block in
the AG. If we try to find the next inode in the AG by adding one to the
inode number, we increment the inode number past the size of the AG. The
result is that the macro XFS_INO_TO_AGINO() will strip the AG portion of
the inode number and return an inode number of zero.
That is, instead of terminating the lookup loop because we hit the inode
number went outside the valid range for the AG, the search index returns
to zero and we start traversing the radix tree from the start again. This
results in an endless loop in xfs_sync_inodes_ag().
Fix it be detecting if the new search index decreases as a result of
incrementing the current inode number. That indicate an overflow and hence
that we have finished processing the AG so we can terminate the loop.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32335a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Use the reclaim tag to walk the radix tree and find the inodes under
reclaim. This was the only user of the deleted inode list.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32333a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Prepare for removing the deleted inode list by marking inodes for reclaim
in the inode radix trees so that we can use the radix trees to find
reclaimable inodes.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32331a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The function names xfs_finish_reclaim and xfs_finish_reclaim_all are not
very descriptive of what they are reclaiming. Rename to
xfs_reclaim_inode[s] to match the xfs_sync_inodes() function.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32330a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Background inode reclaim is run by the xfssyncd. Move the reclaim worker
functions to be close to the sync code as the are very similar in
structure and are both run from the same background thread.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32329a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
With the combined linux and XFS inode, we need to ensure that the combined
structure is not freed before the generic code is finished with the inode.
As it turns out, there is a case where the XFS inode is freed before the
linux inode - when xfs_reclaim() is called from ->clear_inode() on a clean
inode, the xfs inode is freed during that call. The generic code
references the inode after the ->clear_inode() call, so this is a use
after free situation.
Fix the problem by moving the xfs_reclaim() call to ->destroy_inode()
instead of in ->clear_inode(). This ensures the combined inode structure
is not freed until after the generic code has finished with it.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32324a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.
Version 3 o kill xfs_icount()
Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32323a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Once the Linux inode and the XFS inode are combined, we cannot rely on
just check if the linux inode exists as a method of determining if it is
valid or not. Hence we should always call xfs_mark_inode_dirty_sync()
instead as it does the correct checks to determine if the liinux inode is
in a valid state or not.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32318a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
There are really two cases in xfs_iget_core(). The first is the cache hit
case, the second is the miss case. They share very little code, and hence
can easily be factored out into separate functions. This makes the code
much easier to understand and subsequently modify.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32317a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
We can only read inode->i_count if the inode is actually there and not a
NULL pointer. This was introduced in one of the recent sync patches.
SGI-PV: 988255
SGI-Modid: xfs-linux-melb:xfs-kern:32315a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With all the other filesystem sync code it in xfs_sync.c including the
data quiesce code, it makes sense to move the remaining quiesce code to
the same place.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32312a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
There are no more callers to xfs_sync() now, so remove the function
altogther.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32311a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
SYNC_CLOSE is only ever used and checked in conjunction with SYNC_WAIT,
and this only done in one spot. The only thing this does is make
XFS_bflush() calls to the data buftargs.
This will happen very shortly afterwards the xfs_sync() call anyway in the
unmount path via the xfs_close_devices(), so this code is redundant and
can be removed. That only user of SYNC_CLOSE is now gone, so kill the flag
completely.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32310a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Continue to de-multiplex xfs_sync be replacing all SYNC_DELWRI callers
with direct calls functions that do the work. Isolate the data quiesce
case to a function in xfs_sync.c. Isolate the FSDATA case with explicit
calls to xfs_sync_fsdata().
Version 2: o Push delwri related log forces into xfs_sync_inodes().
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32309a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Continue to de-multiplex xfs_sync be replacing all SYNC_ATTR callers with
direct calls xfs_sync_inodes(). Add an assert into xfs_sync() to ensure we
caught all the SYNC_ATTR callers.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32308a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Start de-multiplexing xfs_sync() by making xfs_sync_worker() call the
specific sync functions it needs. This is only a small, unique subset of
the entire xfs_sync() code so is easier to follow.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32307a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now that the only caller is xfs_sync(), merge the two together as it makes
no sense to keep them separate.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32306a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of
xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with
direct calls to xfs_sync_inodes() as that is all that is being done with
the specific flags being passed in.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32305a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
With the sync code relocated to the linux-2.6 directory we can use struct
inodes directly. If we do the same thing for the quota release code, we
can remove vn_grab altogether. While here, convert the VN_BAD() checks to
is_bad_inode() so we can remove vnodes entirely from this code.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32304a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Split out two helpers from xfs_syncsub for the dummy log commit and the
superblock writeout.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32303a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move the XFS_BMAP_SANITY_CHECK macro out of line and make it a properly
typed function. Also pass the xfs_buf for the btree block instead of just
the btree block header, as we will need some additional information for it
to implement CRC checking of btree blocks.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32301a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
structures.
Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32300a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the generic record / key / ptr addressing macros that use cpp
token pasting with simpler macros that do the job for just one given btree
type. The new macros lose the cur argument and thus can be used outside
the core btree code, but also gain an xfs_mount * argument to allow for
checking the CRC flag in the near future. Note that many of these macros
aren't actually used in the kernel code, but only in userspace (mostly in
xfs_repair).
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32295a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now we've removed all users of the mount inode list, we can kill it. This
reduces the size of the xfs_inode by 2 pointers.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32293a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.
Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32292a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Make releasing all inode dquots traverse the per-ag inode radix trees
rather than the mount inode list. This removes another user of the mount
inode list.
Version 3 o fix comment relating to avoiding trying to release the
quota inodes and those in reclaim.
Version 2 o add comment explaining use of gang lookups for a single inode
o use IRELE, not VN_RELE o move check for ag initialisation to caller.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32291a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Update xfs_sync_inodes to walk the inode radix tree cache to find dirty
inodes. This removes a huge bunch of nasty, messy code for traversing the
mount inode list safely and removes another user of the mount inode list.
Version 3 o rediff against new linux-2.6/xfs_sync.c code
Version 2 o add comment explaining use of gang lookups for a single inode
o use IRELE, not VN_RELE o move check for ag initialisation to caller.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32290a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Normally dquots are written back via delayed write mechanisms. They are
flushed to their backing buffer by xfssyncd, which is then pushed out by
either AIL or xfsbufd flushing. The flush from the xfssyncd is supposed to
be non-blocking, but xfs_qm_dqflush() always waits for pinned duots, which
means that it will block for the length of time it takes to do a
synchronous log force. This causes unnecessary extra log I/O to be issued
whenever we try to flush a busy dquot.
Avoid the log forces and blocking xfssyncd by making xfs_qm_dqflush() pay
attention to what type of sync it is doing when it sees a pinned dquot and
not waiting when doing non-blocking flushes.
SGI-PV: 988147
SGI-Modid: xfs-linux-melb:xfs-kern:32287a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_iflush_all() walks the m_inodes list to find inodes that need
reclaiming. We already have such a list - the m_del_inodes list. Replace
xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up
xfs_finish_reclaim_all() to handle the different flush modes now needed.
Originally based on a patch from Christoph Hellwig.
Version 3 o rediff against new linux-2.6/xfs_sync.c code
Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original
code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not
XFS_IFLUSH_ASYNC, to prevent change of behaviour.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32284a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Move all the xfssyncd code to the new xfs_sync.c file. This places it
closer to the actual code that it interacts with, rather than just being
associated with high level VFS code.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32283a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The sync code in XFS is spread around several files. While it used to make
sense to have such a distribution, the code is about to be cleaned up and
so centralising it in one spot as the first step makes sense.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32282a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This is a fix for patch " Clean up dquot pincount code" which introduced a
build breakage due to a missing & in xfs_qm_dquot_logitem_pin.
SGI-PV: 986789
SGI-Modid: xfs-linux-melb:xfs-kern:32221a
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This is a code cleanup and optimization that removes a per mount point
spinlock from the quota code and cleans up the code.
The patch changes the pincount from being an int protected by a spinlock
to an atomic_t allowing the pincount to be manipulated without holding the
spinlock.
This cleanup also protects against random wakup's of both the aild and
xfssyncd by reevaluating the pincount after been woken. Two latter patches
will address the Spurious wakeups.
SGI-PV: 986789
SGI-Modid: xfs-linux-melb:xfs-kern:32215a
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's possible to have outstanding xfs_ioend_t's queued when the file size
is zero. This can happen in the direct I/O path when a direct I/O write
fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie
xfs_end_io_direct() does not know that the I/O failed so can't force the
xfs_ioend_t to be flushed synchronously).
When we truncate a file on unlink we don't know to wait for these
xfs_ioend_ts and we can have a use-after-free situation if the inode is
reclaimed before the xfs_ioend_t is finally processed.
As was suggested by Dave Chinner lets wait for all I/Os to complete when
truncating the file size to zero.
SGI-PV: 981668
SGI-Modid: xfs-linux-melb:xfs-kern:32216a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Make the existing bmap btree tracing generic so that it applies to all
btree types.
Some fragments lifted from a patch by Dave Chinner.
This adds two files that were missed from the previous btree tracing
checkin.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32210a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Lots of functionality in xfs_btree.c isn't needed by callers outside of
this file anymore, so mark these functions static.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32209a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add methods to check whether two keys/records are in the righ order. This
replaces the xfs_btree_check_key and xfs_btree_check_rec methods. For the
callers from xfs_bmap.c just opencode the bmbt-specific asserts.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32208a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
These are equivalent to the xfs_btree_* versions, and the only remaining
caller can be switched to the generic one after they are exported. Also
remove some now dead infrastructure in xfs_bmap_btree.c.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32207a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Not really much reason to make it generic given that it's so small, but
this is the last non-method in xfs_alloc_btree.c and xfs_ialloc_btree.c,
so it makes the whole btree implementation more structured.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32206a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree delete code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32205a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_killroot is a mostly generic implementation of moving from a real
block based root to an inode based root. So move it to xfs_btree.c where
it can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_kill_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case. I've also added a comment describing what it does and why
it's named the way it is.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32203a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree insert code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32202a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_newroot is a mostly generic implementation of moving from an
inode root to a real block based root. So move it to xfs_btree.c where it
can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_new_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32201a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Add a xfs_btree_new_root helper for the alloc and ialloc btrees. The bmap
btree needs it's own version and is not converted.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32200a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree split code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32198a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree left shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32197a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree right shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
The most complicated part here is the lastrec tracking for the alloc
btree. Most logic is in the update_lastrec method which has to do some
hopefully good enough dirty magic to maintain it.
[hch: split out from bigger patch and a rework of the lastrec
logic]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Note that there are many > 80 char lines introduced due to the
xfs_btree_key casts. But the places where this happens is throw-away code
once the whole btree code gets merged into a common implementation.
The same is true for the temporary xfs_alloc_log_keys define to the new
name. All old users will be gone after a few patches.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32191a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Because this is the first major generic btree routine this patch includes
some infrastrucure, first a few routines to deal with a btree block that
can be either in short or long form, second xfs_btree_read_buf_block,
which is the new central routine to read a btree block given a cursor, and
third the new xfs_btree_ptr_addr routine to calculate the address for a
given btree pointer record.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32190a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add new helpers in xfs_btree.c to find the record, key and block pointer
entries inside a btree block. To implement this genericly the
->get_maxrecs methods and two new xfs_btree_ops entries for the key and
record sizes are used. Also add a big comment describing how the
addressing inside a btree block works.
Note that these helpers are unused until users are introduced in the next
patches and this patch will thus cause some harmless compiler warnings.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32189a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Factor xfs_btree_maxrecs into a per-btree operation.
The get_maxrecs method is based on a patch from Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32188a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the existing bmap btree tracing generic so that it applies to all
btree types.
Some fragments lifted from a patch by Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Introduce statistics coverage of all the btrees and cover all the btree
operations, not just some.
Invaluable for determining test code coverage of all the btree
operations....
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32184a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Move the various btree validation helpers around in xfs_btree.c so that
they are close to each other and in common #ifdef DEBUG sections.
Also add a new xfs_btree_check_ptr helper to check a btree ptr that can be
either long or short form.
Split out from a bigger patch from Dave Chinner with various small changes
applied by me.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32183a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Refactor xfs_btree_readahead to make it more readable:
(a) remove the inline xfs_btree_readahead wrapper and move all checks out
of line into the main routine.
(b) factor out helpers for short/long form btrees
(c) move check for root in inodes from the callers into
xfs_btree_readahead
[hch: split out from a big patch and minor cleanups]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32182a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add a flag to the xfs btree cursor when using long (64bit) block pointers
instead of checking btnum == XFS_BTNUM_BMAP.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32181a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
The bmap btree is rooted in the inode and not in a disk block. Make the
support for this feature more generic by adding a btree flag to for this
feature instead of relying on the XFS_BTNUM_BMAP btnum check.
Also clean up xfs_btree_get_block where this new flag is used.
Based upon a patch from Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32180a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add generic union types for btree pointers, keys and records. The generic
btree pointer contains either a 32 and 64bit big endian scalar for short
and long form btrees, and the key and record contain the relevant type for
each possible btree.
Split out from a bigger patch from Dave Chinner and simplified a little
further.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32178a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.
Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.
The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32176a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
This type is only embedded in struct xfs_btree_block and never used
directly. By moving the fields directly into struct xfs_btree_block a lot
of the macros for struct xfs_btree_sblock and struct xfs_btree_lblock can
be used for struct xfs_btree_block too now which helps greatly with some
of the migrations during implementing the generic btree code.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32174a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Lock debugging reported the ilock was being destroyed without being
unlocked. We don't need to lock the inode until we are going to insert it
into the radix tree.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32159a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Destroying the quota stuff on unmount can access the log - ie
XFS_QM_DONE() ends up in xfs_dqunlock() which calls
xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the
log has already been destroyed. Just move the cleanup of the quota code
earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving
XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot.
SGI-PV: 987086
SGI-Modid: xfs-linux-melb:xfs-kern:32148a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
[PATCH] kill the rest of struct file propagation in block ioctls
[PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
[PATCH] get rid of blkdev_locked_ioctl()
[PATCH] get rid of blkdev_driver_ioctl()
[PATCH] sanitize blkdev_get() and friends
[PATCH] remember mode of reiserfs journal
[PATCH] propagate mode through swsusp_close()
[PATCH] propagate mode through open_bdev_excl/close_bdev_excl
[PATCH] pass fmode_t to blkdev_put()
[PATCH] kill the unused bsize on the send side of /dev/loop
[PATCH] trim file propagation in block/compat_ioctl.c
[PATCH] end of methods switch: remove the old ones
[PATCH] switch sr
[PATCH] switch sd
[PATCH] switch ide-scsi
[PATCH] switch tape_block
[PATCH] switch dcssblk
[PATCH] switch dasd
[PATCH] switch mtd_blkdevs
[PATCH] switch mmc
...
Now that we've moved the readdir hack to the nfsd code, we can
remove the local version from the XFS code.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
replace open_bdev_excl/close_bdev_excl with variants taking fmode_t.
superblock gets the value used to mount it stored in sb->s_mode
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we skip unrecognized options in xfs_fs_remount we should just break
out of the switch and not return because otherwise we may skip clearing
the xfs-internal read-only flag. This will only show up on some
operations like touch because most read-only checks are done by the VFS
which thinks this filesystem is r/w. Eventually we should replace the
XFS read-only flag with a helper that always checks the VFS flag to make
sure they can never get out of sync.
Bug reported and fix verified by Marcel Beister on #xfs.
Bug fix verified by updated xfstests/189.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Timothy Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared. But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound. Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.
This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.
Thanks to Toei Rei for reporting the bug.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yet another bug was found in xfs_iext_irec_compact_full() and while the
source of the bug was found it wasn't an easy task to track it down
because the conditions are very difficult to reproduce.
A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their
significant effort in tracking down the source of this corruption.
xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost
identical - they both compact indirect extent lists by moving extents from
subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only
moves extents if all of the extents in the next buffer will fit into the
empty space in the buffer before it. xfs_iext_irec_compact_full() will go
a step further and move part of the next buffer if all the extents wont
fit. It will then shift the remaining extents in the next buffer up to the
start of the buffer. The bug here was that we did not update er_extoff and
this caused extent list corruption.
It does not appear that this extra functionality gains us much. Calling
xfs_iext_irec_compact_pages() instead will do a good enough job at
compacting the indirect list and will be quicker too.
For the case in xfs_iext_indirect_to_direct() the total number of extents
in the indirect list will fit into one buffer so we will never need the
extra functionality of xfs_iext_irec_compact_full() there.
Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the
buffers will never overlap) so we don't want the performance hit that can
incur.
SGI-PV: 987159
SGI-Modid: xfs-linux-melb:xfs-kern:32166a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
If we don't move all the records from the next buffer into the current
buffer then we need to update the er_extoff field of the next buffer as we
shift the remaining records to the start of the buffer.
SGI-PV: 987159
SGI-Modid: xfs-linux-melb:xfs-kern:32165a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Russell Cattelan <cattelan@thebarn.com>
When unreserving space with boundaries that are not block aligned we round
up the start and round down the end boundaries and then use this function,
xfs_zero_remaining_bytes(), to zero the parts of the blocks that got
dropped during the rounding. The problem is we don't consider if these
blocks are beyond eof. Worse still is if we encounter delayed allocations
beyond eof we will try to use the magic delayed allocation block number as
a real block number. If the file size is ever extended to expose these
blocks then we'll go through xfs_zero_eof() to zero them anyway.
SGI-PV: 983683
SGI-Modid: xfs-linux-melb:xfs-kern:32055a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
We have a use-after-free issue where log completions access buffers via
the buffer log item and the buffer has already been freed. Fix this by
taking a reference on the buffer when attaching the buffer log item and
release the hold when the buffer log item is detached and we no longer
need the buffer. Also create a new function xfs_buf_item_free() to combine
some common code.
SGI-PV: 985757
SGI-Modid: xfs-linux-melb:xfs-kern:32025a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
If we call xfs_lock_two_inodes() to grab both the iolock and the ilock,
then drop the ilocks on both inodes, then grab them again (as
xfs_swap_extents() does) then lockdep will report a locking order problem.
This is a false positive.
To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks
at once - force calers to make two separate calls. This means that nested
dropping and regaining of the ilocks will retain the same lockdep subclass
and so lockdep will not see anything wrong with this code.
SGI-PV: 986238
SGI-Modid: xfs-linux-melb:xfs-kern:31999a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The current code in xlog_iodone() uses the wrong macro to check if the
barrier has been cleared due to an EOPNOTSUPP error form the lower layer.
SGI-PV: 986143
SGI-Modid: xfs-linux-melb:xfs-kern:31984a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With the help from some tracing I found that we try to map extents beyond
eof when doing a direct I/O read. It appears that the way to inform the
generic direct I/O path (ie do_direct_IO()) that we have breached eof is
to return an unmapped buffer from xfs_get_blocks_direct(). This will cause
do_direct_IO() to jump to the hole handling code where is will check for
eof and then abort.
This problem was found because a direct I/O read was trying to map beyond
eof and was encountering delayed allocations. The delayed allocations
beyond eof are speculative allocations and they didn't get converted when
the direct I/O flushed the file because there was only enough space in the
current AG to convert and write out the dirty pages within eof. Note that
xfs_iomap_write_allocate() wont necessarily convert all the delayed
allocation passed to it - it will return after allocating the first extent
- so if the delayed allocation extends beyond eof then it will stay that
way.
SGI-PV: 983683
SGI-Modid: xfs-linux-melb:xfs-kern:31929a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Logically we would return an error in xfs_fs_remount code to prevent users
from believing they might have changed mount options using remount which
can't be changed.
But unfortunately mount(8) adds all options from mtab and fstab to the
mount arguments in some cases so we can't blindly reject options, but have
to check for each specified option if it actually differs from the
currently set option and only reject it if that's the case.
Until that is implemented we return success for every remount request, and
silently ignore all options that we can't actually change.
SGI-PV: 985710
SGI-Modid: xfs-linux-melb:xfs-kern:31908a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Memory allocations for log->l_grant_trace and iclog->ic_trace are done on
demand when the first event is logged. In xlog_state_get_iclog_space() we
call xlog_trace_iclog() under a spinlock and allocating memory here can
cause us to sleep with a spinlock held and deadlock the system.
For the log grant tracing we use KM_NOSLEEP but that means we can lose
trace entries. Since there is no locking to serialize the log grant
tracing we could race and have multiple allocations and leak memory.
So move the allocations to where we initialize the log/iclog structures.
Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace
since it's not even used.
SGI-PV: 983738
SGI-Modid: xfs-linux-melb:xfs-kern:31896a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
As pointed out during review d_add_ci argument order should match d_add,
so switch the dentry and inode arguments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch lets the files using linux/version.h match the files that
#include it.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patches that are intended to introduce copy-on-write credentials for 2.6.28
require abstraction of access to some fields of the task structure,
particularly for the case of one task accessing another's credentials where RCU
will have to be observed.
Introduced here are trivial no-op versions of the desired accessors for current
and other tasks so that other subsystems can start to be converted over more
easily.
Wrappers are introduced into a new header (linux/cred.h) for UID/GID,
EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed
user_struct. These wrappers are macros because the ordering between header
files mitigates against making them inline functions.
linux/cred.h is #included from linux/sched.h.
Further, XFS is modified such that it no longer defines and uses parameterised
versions of current_fs[ug]id(), thus getting rid of the namespace collision
otherwise incurred.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
The ticket allocation code got reworked in 2.6.26 and we now free tickets
whereas before we used to cache them so the use-after-free went
undetected.
SGI-PV: 985525
SGI-Modid: xfs-linux-melb:xfs-kern:31877a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.
In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_MAYFAIL for the m_perag allocation, we can deal with the error
easily and blocking forever during mount is not a good idea either.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31837a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_free mostly frees the perag data, which is something that is
duplicated in the mount error path.
Move the XFS_QM_DONE call to the caller and remove the useless
mutex_destroy/spinlock_destroy calls so that we can re-use it for the
mount error path. Also rename it to xfs_free_perag to reflect what it
does.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31836a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmounts can't and shouldn't return errors so declare it as returning
void.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31833a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove all the useless flags and code keyed off it in xfs_mountfs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no
need to call file_update_time and then copy the values over to the XFS
inode. The only additional thing in file_update_time are checks not
applicable to the write path.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31829a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Port a little optmization from file_update_time to xfs_ichgtime, and only
update the timestamp and mark the inode dirty if the timestamp actually
changes in the timer tick resultion supported by the running kernel.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31827a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.
So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all users of the sema_t are gone from XFS we can finally kill it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31823a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31822a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a
completion. Change it to a completion and remove the last user of the
sema_t from XFS.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31815a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
A lot of code has been converted away from semaphores, but there are still
comments that reference semaphore behaviour. The log code is the worst
offender. Update the comments to reflect what the code really does now.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31814a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The alloc and inobt btree use the same agbp/agno pair in the btree_cur
union. Make them use the same bc_private.a union member so that code for
these two short form btree implementations can be shared.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31788a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Sanitize setting up the Linux indode.
Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.
xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31782a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31776a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When multiple inodes are locked in XFS it happens in order of the inode
number, with the everything but the first inode trylocked if any of the
previous inodes is in the AIL.
Except for the sorting of the inodes this logic is implemented in
xfs_lock_inodes, but also partially duplicated in xfs_lock_dir_and_entry
in a particularly stupid way adds a lock roundtrip if the inode ordering
is not optimal.
This patch adds a new helper xfs_lock_two_inodes that takes two inodes and
locks them in the most optimal way according to the above locking protocol
and uses it for all places that want to lock two inodes.
The only caller of xfs_lock_inodes is xfs_rename which might lock up to
four inodes.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31772a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All the error injection is already enabled through ifdef DEBUG, so kill
the never set second cpp symbol to activate it without the rest of the
debugging infrastructure.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31771a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all direct calls to VN_HOLD/VN_RELE are gone we can implement
IHOLD/IRELE directly.
For the IHOLD case also replace igrab with a direct increment of i_count
because we are guaranteed to already have a live and referenced inode by
the VFS. Also remove the vn_hold statistic because it's been rather
meaningless for some time with most references done by other callers.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31764a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
All the ACL routines are called from inode operations which are guaranteed
to have a referenced inode by the VFS, so there's no need for the ACL code
to grab another temporary one.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31763a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31761a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31760a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Looks like somehow xfs got missed in the conversion that took place in
e231c2ee64, "Convert ERR_PTR(PTR_ERR(p))
instances to ERR_CAST(p)
<http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit
diff;h=e231c2ee64eb1c5cd3c63c31da9dac7d888dcf7f>"
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31757a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Thanks to hch's endian work, INT_GET etc are no longer used, and may as
well be removed. INT_SET is still used in the acl code, though.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31756a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move it from the attr code to the transaction code and make
the attr code call the new function.
We rolltrans is really usefull whenever we want to use rolling
transaction, should be generic, it isn't dependent on any part
of the attr code anyway.
We use this excuse to change all the:
if ((error = xfs_attr_rolltrans()))
calls into:
error = xfs_trans_roll();
if (error)
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31729a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use
it properly for all mount failure cases. Also switch the allocations for
these to kstrdup while we're at it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31728a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We will need that to be able to calculate the size of log we need for a
specific attr (for Create+EA). The local flag is needed so that we can
fail if we run into ENOSPC when trying to alloc blocks.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31727a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we allow incore extent tree allocations to recurse into the
filesystem under memory pressure, new delayed allocations through
xfs_iomap_write_delay() can deadlock on themselves if memory
reclaim tries to write back dirty pages from that inode.
It will deadlock in xfs_iomap_write_allocate() trying to take the
ilock we already hold. This can also show up as complex ABBA deadlocks
when multiple threads are triggering memory reclaim when trying to
allocate extents.
The main cause of this is the fact that delayed allocation is not done in
a transaction, so KM_NOFS is not automatically added to the allocations to
prevent this recursion.
Mark all allocations done for the incore inode extent tree as KM_NOFS to
ensure they never recurse back into the filesystem.
Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31726a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_vtoi() is redundant and only unsed in small sections of code.
Replace them with widely used XFS_I() inline and kill xfs_vtoi().
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31725a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In several places we directly convert from the XFS inode
to the linux (VFS) inode by a simple deference of ip->i_vnode.
We should not do this - a helper function should be used to
extract the VFS inode from the XFS inode.
Introduce the function VFS_I() to extract the VFS inode
from the XFS inode. The name was chosen to match XFS_I() which
is used to extract the XFS inode from the VFS inode.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31720a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We should not access a buffer after dropping it's reference count
otherwise we could race with another thread that releases the final
reference count and frees the buffer causing us to access potentially
unmapped memory. The bug this change fixes only occured on DEBUG XFS since
the offending code was in an ASSERT.
SGI-PV: 984429
SGI-Modid: xfs-linux-melb:xfs-kern:31715a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
This keeps xfs_lowbit64 as it was since there aren't good generic helpers
there ... Patch inspired by Andi Kleen.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31472a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Like the page lock change, this also requires name change, so convert the
raw test_and_set bitop to a trylock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).
This also facilitates lockdeping of page lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These days most of the attributes in struct inode are properly kept in
sync by XFS. This patch removes the need for vn_revalidate completely by:
- keeping inode.i_flags uptodate after any flags are updated in
xfs_ioctl_setattr
- keeping i_mode, i_uid and i_gid uptodate in xfs_setattr
SGI-PV: 984566
SGI-Modid: xfs-linux-melb:xfs-kern:31679a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
it can be switched to take struct iattr directly and thus simplify the
implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not
conflict with the ATTR_ flags used by the VFS.
SGI-PV: 984565
SGI-Modid: xfs-linux-melb:xfs-kern:31678a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
->setattr but also addition XFS-specific attributes: project id, inode
flags and extent size hint. Having these in a single function makes it
more complicated and forces to have us a bhv_vattr intermediate structure
eating up stackspace.
This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set
these attributes and remove the code to set them through xfs_setattr.
SGI-PV: 984564
SGI-Modid: xfs-linux-melb:xfs-kern:31677a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
particular case, the delta param which is supposed to describe the region
where extents have changed was not updated appropriately.
SGI-PV: 984030
SGI-Modid: xfs-linux-melb:xfs-kern:31663a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Olaf Weber <olaf@sgi.com>
Remount currently happily accept any option thrown at it, although the
only filesystem specific option it actually handles is barrier/nobarrier.
And it actually doesn't handle these correctly either because it only uses
the value it parsed when we're doing a ro->rw transition. In addition to
that there's also a bad bug in xfs_parseargs which doesn't touch the
actual option in the mount point except for a single one,
XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every
remounted in some way to not support 64bit inodes with no way to recover
unless unmounted.
This patch changes xfs_fs_remount to use it's own linux/parser.h based
options parse instead of xfs_parseargs and reject all options except for
barrier/nobarrier and to the right thing in general. Eventually I'd like
to have a single big option table used for mount aswell but that can wait
for a while.
SGI-PV: 983964
SGI-Modid: xfs-linux-melb:xfs-kern:31382a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
md raid1 can pass down barriers, but does not set an ordered flag on the
queue, so xfs does not even attempt a barrier write, and will never use
barriers on these block devices.
Remove the flag check and just let the barrier write test determine
barrier support.
A possible risk here is that if something does not set an ordered flag and
also does not properly return an error on a barrier write... but if it's
any consolation jbd/ext3/reiserfs never test the flag, and don't even do a
test write, they just disable barriers the first time an actual journal
barrier write fails.
SGI-PV: 983924
SGI-Modid: xfs-linux-melb:xfs-kern:31377a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently the xfs module init/exit code is a mess. It's farmed out over a
lot of function with very little error checking. This patch makes sure we
propagate all initialization failures properly and clean up after them.
Various runtime initializations are replaced with compile-time
initializations where possible to make this easier. The exit path is
similarly consolidated.
There's now split out function to create/destroy the kmem zones and
alloc/free the trace buffers. I've also changed the ktrace allocations to
KM_MAYFAIL and handled errors resulting from that.
And yes, we really should replace the XFS_*_TRACE ifdefs with a single
XFS_TRACE..
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31354a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
can use the _ACL_TYPE_* definitions in linux-2.6/xfs_xattr.c. The
forthcoming generic acl code will also fix this problem.
SGI-PV: 982343
SGI-Modid: xfs-linux-melb:xfs-kern:31369a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If we don't do the blocksize/PAGESIZE check before calling
xfs_sb_validate_fsb_count() we can assert if we try to mount with a
blocksize > pagesize. The assert is valid so leave it and just move the
blocksize/pagesize check earlier.
SGI-PV: 983734
SGI-Modid: xfs-linux-melb:xfs-kern:31365a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
As reported by Michael-John Turner XFS updates the mtime on the source
inode of a rename call in case it's a directory and changes the parent.
This doesn't make any sense, is not mentioned in the standards and not
performed by any other Linux filesystems so remove it.
SGI-PV: 983684
SGI-Modid: xfs-linux-melb:xfs-kern:31364a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
algorithm
If xfs_bmbt_split() cannot find an AG with sufficient free space to
satisfy a full extent btree split then fall back to the lowspace allocator
algorithm.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31359a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
When free space is running low the extent allocator may choose to allocate
an extent from an AG without leaving sufficient space for a btree split
when inserting the new extent (see where xfs_bmap_btalloc() sets minleft
to 0). In this case the allocator will enable the lowspace algorithm which
is supposed to allow further allocations (such as btree splits and
newroots) to allocate from sequential AGs. This algorithm has been broken
for a long time and this patch restores its behaviour.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31358a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
The bmap btree split code relies on a previous data extent allocation
(from xfs_bmap_btalloc()) to find an AG that has sufficient space to
perform a full btree split, when inserting the extent. When converting
unwritten extents we don't allocate a data extent so a btree split will be
the first allocation. In this case we need to set minleft so the allocator
will pick an AG that has space to complete the split(s).
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31357a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
xfs_attrmulti_by_handle currently request the size based on
sizeof(attr_multiop_t) but should be using sizeof(xfs_attr_multiop_t)
because that is what it is dealing with. Despite beeing wrong this
actually harmless in practice because both structures are the same size on
all platforms.
But this sizeof was the only user of struct attr_multiop so we can just
kill it. Also move the ATTR_OP_* defines xfs_attr.h into the struct
xfs_attr_multiop defintion in xfs_fs.h because they are only used with
that structure, and are part of the user ABI for the
XFS_IOC_ATTRMULTI_BY_HANDLE ioctl.
SGI-PV: 983508
SGI-Modid: xfs-linux-melb:xfs-kern:31352a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_attrlist_by_handle should only take the ATTR_ flags for the root
namespaces. The ATTR_KERN* flags may change at anytime and expect special
preconditions that can't be guaranteed for userspace-originating requests.
For example passing down ATTR_KERNNOVAL through xfs_attrlist_by_handle
will hit an assert in debug builds currently.
SGI-PV: 983677
SGI-Modid: xfs-linux-melb:xfs-kern:31351a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
After a btree insert operation a cursor can be invalid due to block splits
and a maybe a new root block. We reset the cursor in xfs_bmbt_insert() in
the cases where we think we need to but it isn't enough as we still see
assertions. Just do what we do elsewhere and reset the cursor
unconditionally. Also remove the fix to revalidate the original cursor in
xfs_bmbt_insert().
SGI-PV: 983336
SGI-Modid: xfs-linux-melb:xfs-kern:31342a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
ASSERTs are no good to us on a non-debug build so use
XFS_WANT_CORRUPTED_GOTOs to report extent btree corruption ASAP.
SGI-PV: 983500
SGI-Modid: xfs-linux-melb:xfs-kern:31338a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
xfs_dir2_node_lookup() calls xfs_da_node_lookup_int() which iterates
through leaf blocks containing the matching hash value for the name being
looked up. Inside xfs_da_node_lookup_int(), it calls the
xfs_dir2_leafn_lookup_for_entry() for each leaf block.
xfs_dir2_leafn_lookup_for_entry() iterates through each matching
hash/offset pair doing a name comparison to find the matching dirent.
For CI mode, the state->extrablk retains the details of the block that has
the CI match so xfs_dir2_node_lookup() can return the case-preserved name.
The original implementation didn't retain the xfs_da_buf_t properly, so
the lookup was returning a bogus name to be stored in the dentry.
In the case of unlink, the bad name was passed and in debug mode, ASSERTed
when it can't find the entry.
SGI-PV: 983284
SGI-Modid: xfs-linux-melb:xfs-kern:31337a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The core kernel uses vfs_getattr to look at the inode size and similar
attributes, so there is no need to keep i_size uptodate for directories or
special files. This means we can remove xfs_validate_fields because the
I/O path already keeps i_size uptodate for regular files.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31336a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_remove and xfs_rmdir are almost the same with a little more work
performed in xfs_rmdir due to the . and .. entries. This patch merges
xfs_rmdir into xfs_remove and performs these actions conditionally.
Also clean up the error handling which was a nightmare in both versions
before.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31335a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
context count of ssize_t versus int. Change context count to be ssize_t.
SGI-PV: 983395
SGI-Modid: xfs-linux-melb:xfs-kern:31333a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This function is used to compact the indirect extent list by moving
extents from one page to the previous to fill them up. After we move some
extents to an earlier page we need to shuffle the remaining extents to the
start of the page. The actual bug here is the second argument to memmove()
needs to index past the extents, that were copied to the previous page,
and move the remaining extents. For pages that are already full (ie
ext_avail == 0) the compaction code has no net effect so don't do it.
SGI-PV: 983337
SGI-Modid: xfs-linux-melb:xfs-kern:31332a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
During a forced shutdown a xfs inode can be destroyed before log I/O
involving that inode is complete. We need to wait for the inode to be
unpinned before tearing it down. Version 2 cleans up the code a bit by
relying on xfs_iflush() to do the unpinning and forced shutdown check.
SGI-PV: 981240
SGI-Modid: xfs-linux-melb:xfs-kern:31326a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
and not go through xfs_attr_list.
SGI-PV: 983395
SGI-Modid: xfs-linux-melb:xfs-kern:31324a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
architecture.
This should fix the longstanding issues with xfs and old ABI arm boxes,
which lead to various asserts and xfs shutdowns, and for which an
(incorrect) patch has been floating around for years.
I've verified this patch by comparing the on-disk structure layouts using
pahole from the dwarves package, as well as running through a bit of xfsqa
under qemu-arm, modified so that the check/repair phase after each test
actually executes check/repair from the x86 host, on the filesystem
populated by the arm emulator. Thus far it all looks good.
There are 2 other structures with extra padding at the end, but they don't
seem to cause trouble. I suppose they could be packed as well:
xfs_dir2_data_unused_t and xfs_dir2_sf_t.
Note that userspace needs a similar treatment, and any filesystems which
were running with the previous rogue "fix" will now see corruption (either
in the kernel, or during xfs_repair) with this fix properly in place; it
may be worth teaching xfs_repair to identify and fix that specific issue.
SGI-PV: 982930
SGI-Modid: xfs-linux-melb:xfs-kern:31280a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the generic set, get and removexattr methods and supply the s_xattr
array with fine-grained handlers. All XFS/Linux highlevel attr handling is
rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so
that it's separated from the generic low-level code.
SGI-PV: 982343
SGI-Modid: xfs-linux-melb:xfs-kern:31234a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The vfs_unlink/d_delete functionality in the Linux VFS make the
dentry negative if it is the only inode being referenced. Case-insensitive
mode doesn't work with negative dentries, so if using CI-mode, invalidate
the dentry on unlink/rmdir.
SGI-PV: 983102
SGI-Modid: xfs-linux-melb:xfs-kern:31308a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Fixes a problem in the xfs_dir2_remove and xfs_dir2_replace paths which
intenally call directory format specific lookup funtions that assume
args->cmpresult is zeroed.
SGI-PV: 982606
SGI-Modid: xfs-linux-melb:xfs-kern:31268a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Implement ASCII case-insensitive support. It's primary purpose is for
supporting existing filesystems that already use this case-insensitive
mode migrated from IRIX. But, if you only need ASCII-only case-insensitive
support (ie. English only) and will never use another language, then this
mode is perfectly adequate.
ASCII-CI is implemented by generating hashes based on lower-case letters
and doing lower-case compares. It implements a new xfs_nameops vector for
doing the hashes and comparisons for all filename operations.
To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci
<device>
SGI-PV: 981516
SGI-Modid: xfs-linux-melb:xfs-kern:31209a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This implements the code to store the actual filename found during a
lookup in the dentry cache and to avoid multiple entries in the dcache
pointing to the same inode.
To avoid polluting the dcache, we implement a new directory inode
operations for lookup. xfs_vn_ci_lookup() stores the correct case name in
the dcache.
The "actual name" is only allocated and returned for a case- insensitive
match and not an actual match.
Another unusual interaction with the dcache is not storing negative
dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT
is returned. During the VFS lookup, if a dentry returned has no inode,
dput is called and ENOENT is returned. By not doing a d_add, this actually
removes it completely from the dcache to be reused. create/rename have to
be modified to support unhashed dentries being passed in.
SGI-PV: 981521
SGI-Modid: xfs-linux-melb:xfs-kern:31208a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The end of the xfs_da_args structure has 4 unsigned char fields for
true/false information on directory and attr operations using the
xfs_da_args structure.
The following converts these 4 into a op_flags field that uses the first 4
bits for these fields and allows expansion for future operation
information (eg. case-insensitive lookup request).
SGI-PV: 981520
SGI-Modid: xfs-linux-melb:xfs-kern:31206a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Adds two pieces of functionality for the basis of case-insensitive support
in XFS:
1. A comparison result enumerated type: xfs_dacmp. It represents an
exact match, case-insensitive match or no match at all. This patch
only implements different and exact results.
2. xfs_nameops vector for specifying how to perform the hash generation
of filenames and comparision methods. In this patch the hash vector
points to the existing xfs_da_hashname function and the comparison
method does a length compare, and if the same, does a memcmp and
return the xfs_dacmp result.
All filename functions that use the hash (create, lookup remove, rename,
etc) now use the xfs_nameops.hashname function and all directory lookup
functions also use the xfs_nameops.compname function.
The lookup functions also handle case-insensitive results even though the
default comparison function cannot return that. And important aspect of
the lookup functions is that an exact match always has precedence over a
case-insensitive. So while a case-insensitive match is found, we have to
keep looking just in case there is an exact match. In the meantime, the
info for the first case-insensitive match is retained if no exact match is
found.
SGI-PV: 981519
SGI-Modid: xfs-linux-melb:xfs-kern:31205a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
de-duplicate calls to xfs_attr_trace_enter
Every call to xfs_attr_trace_enter() shares the exact same 16 args in the
middle... just send in the context pointer and let the next level down
split it into the ktrace.
Compile tested only.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31200a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_binval aka xfs_flush_buftarg is the first thing done in
xfs_free_buftarg, so there is no need to have duplicated calls just before
xfs_free_buftarg in the mount failure path.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31197a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched
to kzalloc. Plug a leak of the mount structure for most early mount
failures. Move xfs_icsb_init_counters to as late as possible in the mount
path and make sure to undo it so that no stale hotplug cpu notifiers are
left around on mount failures.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Split setting the block and sector size out of xfs_fs_fill_super into a
small helper to make xfs_fs_fill_super more readable.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently closing the rt/log block device is done in the wrong spot, and
far too early. So revampt it:
- xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that
it is done after tearing down the buftarg completely.
- call to xfs_unmountfs_close moved from xfs_mountfs into caller so
that it's done after tearing down the filesystem completely.
- xfs_unmountfs_close is renamed to xfs_close_devices and made static
in xfs_super.c
- opening of the block devices is split into a helper xfs_open_devices
that is symetric in use to xfs_close_devices
- xfs_unmountfs can now lose struct cred
- error handling around device opening sanitized in xfs_fs_fill_super
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Freeing of the superblock is already handled in the caller, and that is
more symmetric with the mount path, too.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount is already pretty linux-specific so merge it into
xfs_fs_fill_super to allow for a more structured mount code in the next
patches. xfs_start_flags and xfs_finish_flags also move to xfs_super.c.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31189a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmount is small and already pretty Linux specific, so merge it into
the callers. The real unmount path is simplified a little by doing a
WARN_ON on the xfs_unmount_flush retval directly instead of propagating
the error back to the caller, and the mout failure case in simplified
significantly by removing the forced shutdown case and all the dmapi
events that shouldn't be sent because the dmapi mount event hasn't been
sent by that time either.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31188a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_igrow_start just expands to xfs_zero_eof with two asserts that are
useless in the context of the only caller and some rather confusing
comments.
xfs_igrow_finish is just a few lines of code decorated again with useless
asserts and confusing comments.
Just kill those two and merge them into xfs_setattr.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31186a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mntupdate already is completely Linux specific due to the VFS flags
passed in, so it might aswell be merged into xfs_fs_remount.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31185a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Quite useless wrapper that doesn't help making the code more readable.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31184a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Recent changes to update the version number during mount (attr2 stuff)
failed to change the assert that checked for calid flags being changed on
mount. Clearly this path hasn't been exercised by the test code....
SGI-PV: 981950
SGI-Modid: xfs-linux-melb:xfs-kern:31183a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
No need for addition permission checks in the xattr handler,
fs/xattr.c:xattr_permission() already does them, and in fact slightly more
strict then what was in the attr_capable handlers.
SGI-PV: 981809
SGI-Modid: xfs-linux-melb:xfs-kern:31164a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The l_flushsema doesn't exactly have completion semantics, nor mutex
semantics. It's used as a list of tasks which are waiting to be notified
that a flush has completed. It was also being used in a way that was
potentially racy, depending on the semaphore implementation.
By using a sv_t instead of a semaphore we avoid the need for a separate
counter, since we know we just need to wake everything on the queue.
Original waitqueue implementation from Matthew Wilcox. Cleanup and
conversion to sv_t by Christoph Hellwig.
SGI-PV: 981507
SGI-Modid: xfs-linux-melb:xfs-kern:31059a
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We found this while experimenting with 2GiB xfs logs. The previous code
never assumed that xfs logs would ever get so large.
SGI-PV: 981502
SGI-Modid: xfs-linux-melb:xfs-kern:31058a
Signed-off-by: Michael Nishimoto <miken@agami.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
kmem_free() function takes (ptr, size) arguments but doesn't actually use
second one.
This patch removes size argument from all callsites.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31050a
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
features2 fields.
Previously, mounting with noattr2 failed to achieve anything because
although it cleared the attr2 mount flag, it would set it again as soon as
it processed the superblock fields. The fix now has an explicit noattr2
flag and uses it later to fix up the versionnum and features2 fields.
SGI-PV: 980021
SGI-Modid: xfs-linux-melb:xfs-kern:31003a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
* do not pass nameidata; struct path is all the callers want.
* switch to new helpers:
user_path_at(dfd, pathname, flags, &path)
user_path(pathname, &path)
user_lpath(pathname, &path)
user_path_dir(pathname, &path) (fail if not a directory)
The last 3 are trivial macro wrappers for the first one.
* remove nameidata in callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All calls to remove_suid() are made with a file pointer, because
(similarly to file_update_time) it is called when the file is written.
Clean up callers by passing in a file instead of a dentry.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
MAY_... found in mask.
The obvious next target in that direction is permission(9)
folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we release the iclog, we do an atomic_dec_and_lock to determine if
we are the last reference and need to trigger update of log headers and
writeout. However, in xlog_state_get_iclog_space() we also need to
check if we have the last reference count there. If we do, we release
the log buffer, otherwise we decrement the reference count.
But the compare and decrement in xlog_state_get_iclog_space() is not
atomic, so both places can see a reference count of 2 and neither will
release the iclog. That leads to a filesystem hang.
Close the race by replacing the atomic_read() and atomic_dec() pair with
atomic_add_unless() to ensure that they are executed atomically.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Tim Shimmin <tes@sgi.com>
Tested-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we have multiple buffers in a single page for a blocksize == pagesize
filesystem we might overwrite the page contents if two callers hit it
shortly after each other. To prevent that we need to keep the page locked
until I/O is completed and the page marked uptodate.
Thanks to Eric Sandeen for triaging this bug and finding a reproducible
testcase and Dave Chinner for additional advice.
This should fix kernel.org bz #10421.
Tested-by: Eric Sandeen <sandeen@sandeen.net>
SGI-PV: 981813
SGI-Modid: xfs-linux-melb:xfs-kern:31173a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We only need to allocate space for the number of inodes in the cluster
when writing back inodes, not every byte in the inode cluster. This
reduces the amount of memory needing to be allocated to 256 bytes instead
of 64k.
SGI-PV: 981949
SGI-Modid: xfs-linux-melb:xfs-kern:31182a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
writeback
If we allow memory reclaim to wait on the pages under writeback in inode
cluster writeback we could deadlock because we are currently holding the
ILOCK on the initial writeback inode which is needed in data I/O
completion to change the file size or do unwritten extent conversion
before the pages are taken out of writeback state.
SGI-PV: 981091
SGI-Modid: xfs-linux-melb:xfs-kern:31015a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_fsync() fails to wait for data I/O completion before checking if the
inode is dirty or clean to decide whether to log the inode or not. This
misses inode size updates when the data flushed by the fsync() is
extending the file.
Hence, like fdatasync(), we need to wait for I/o completion first, then
check the inode for cleanliness. Doing so makes the behaviour of
xfs_fsync() identical for fsync and fdatasync and we *always* use
synchronous semantics if the inode is dirty. Therefore also kill the
differences and remove the unused flags from the xfs_fsync function and
callers.
SGI-PV: 981296
SGI-Modid: xfs-linux-melb:xfs-kern:31033a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The dmapi cruft in xfs_file.c is totally out of date in mainline vs
CVS, and at this point just removing this code which can't be used on
mainline at all seems to be the best option to keep it maintainable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the last sendfile leftovers in mainline. This code is already
gone in CVS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Back when I first submitted XFS for mainline inclusion we made the
decision that the debug code is far to extensive to be accidentally
enabled by users in mainline. But then again it's often quite useful
to track problems down and hacking the makefile all the time is rather
annoying. Given all the debug options with even more overhead like
lockdep or DEBUG_PAGE_ALLOC users (or rather developers) should know
by now what they're doing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we allocation new inode chunks, we initialise the generation numbers
to zero. This works fine until we delete a chunk and then reallocate it,
resulting in the same inode numbers but with a reset generation count.
This can result in inode/generation pairs of different inodes occurring
relatively close together.
Given that the inode/gen pair makes up the "unique" portion of an NFS
filehandle on XFS, this can result in file handles cached on clients being
seen on the wire from the server but refer to a different file. This
causes .... issues for NFS clients.
Hence we need a unique generation number initialisation for each inode to
prevent reuse of a small portion of the generation number space. Use a
random number to initialise the generation number so we don't need to keep
any new state on disk whilst making the new number difficult to guess from
previous allocations.
SGI-PV: 979416
SGI-Modid: xfs-linux-melb:xfs-kern:31001a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The check for block zero access should be done on non-realtime inodes. Fix
the logic error in xfs_write_iomap_allocate(), and simplify the logic on
all checks for block zero access in xfs_iomap.c
SGI-PV: 980888
SGI-Modid: xfs-linux-melb:xfs-kern:30998a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On uniprocessor machines, the incore superblock is used for all in memory
accounting of free blocks. in this situation, changes to the reserved
block count are accounted twice; once directly and once via
xfs_mod_incore_sb(). Seeing as the modification on SMP is done via
xfs_mod_incore_sb(), make this the only update mechanism that UP uses as
well.
SGI-PV: 980654
SGI-Modid: xfs-linux-melb:xfs-kern:30997a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_reserve_blocks() calls xfs_icsb_sync_counters_locked(), which is not
defined if !CONFIG_SMP/!HAVE_PERCPU_SB
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30991a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Commit e687330b5e was meant to remove the
unused HAVE_SPLICE macro, instead an unrelated change was checked enabling
QUOTADEBUG when building DEBUG XFS. Restore the intended changes.
SGI-PV: 971046
SGI-Modid: xfs-linux-melb:xfs-kern:30924a
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With the last two patches XFS_ICSB_SB_LOCKED is never checked and only
superflously passed to xfs_icsb_count, so kill it.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30920a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add an xfs_icsb_balance_counter_locked for the case where mp->m_sb_lock is
already locked.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30918a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a new xfs_icsb_sync_counters_locked for the case where m_sb_lock
is already taken and add a flags argument to xfs_icsb_sync_counters so
that xfs_icsb_sync_counters_flags is not needed.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30917a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The VFS always has an inode reference when we call these functions. So we
only need to grab a signle reference to each inode that's joined to a
transaction - all the other bumping and dropping is as useless as the
comments describing the IRIX semantics.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30912a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Similar to to the previous patch for remove and rmdir only grab a
reference to inodes when we join them to transaction to balance the
decrement on transaction completion. Everything else it taken care of by
the VFS.
Note that the old case had leaks of inode count when src == target or src
or target == one of the parent inodes, but these cases are fortunately
already rejected by the VFS.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30904a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
->rename already gets the target inode passed if it exits. Pass it down to
xfs_rename so that we can avoid looking it up again. Also simplify locking
as the first lock section in xfs_rename can go away now: the isdir is an
invariant over the lifetime of the inode, and new_parent and the nlink
check are namespace topology protected by i_mutex in the VFS. The projid
check needs to move into the second lock section anyway to not be racy.
Also kill the now unused xfs_dir_lookup_int and remove the now-unused
first_locked argumet to xfs_lock_inodes.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30903a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Opencode xfs-kill-xfs_dir_lookup_int here, which gets rid of a lock
roundtrip, and lots of stack space. Also kill the di_mode == 0 check that
has been done in xfs_iget for a few years now.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30901a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Similar to rmdir and remove - avoids a potential transaction reservation
overrun.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30900a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it
encounters an inode with di_mode == 0. Remove the duplicated checks in the
callers.
(the log recovery case is not touched for now)
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30898a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's currently used by the ACL code to read di_mode/di_uid, but these are
simple 32bit scalar values we can just read directly without locking.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30897a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We can just check i_mode / di_mode directly.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30896a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Elevate the write count during the xfs m/ctime updates.
XFS has to do it's own timestamp updates due to an unfortunate VFS
design limitation, so it will have to track writers by itself aswell.
[hch: split out from the touch_atime patch as it's not related to it at all]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some ioctl()s can cause writes to the filesystem. Take these, and make them
use mnt_want/drop_write() instead.
[AV: updated]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
associated comment about gcc behavior really aren't needed; all of these
functions are marked STATIC which includes noinline, and the stack usage
won't be a problem.
This effectively just removes the forward declarations and moves
xfs_ioctl() back to the end of the file.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30534a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
HAVE_SPLICE was part of the infrastructure for building 2.4 and 2.6
kernels out of the same tree. Now we don't build 2.4 kernels this
SGI-PV: 971046
SGI-Modid: xfs-linux-melb:xfs-kern:30878a
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There is no point to the CONFIG_XFS_SECURITY option; it disables the
ability to set security attributes at runtime, but it does not actually
slim down or remove any code for runtime. Just remove it and always allow
security attributes to be set.
SGI-PV: 980310
SGI-Modid: xfs-linux-melb:xfs-kern:30877a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Fix up xfs_bmap_compute_maxlevels() to account for the case when we go
from using attr2 to using attr1. In that case attr1 will no longer
necessarily be at m_attr_offset>>3, but could be at a different value for
di_forkoff. Therefore, we return the worst case scenario using MINDBTPTRS
and MINABTPTRS, as this function is used for determining the maximum log
space.
SGI-PV: 979606
SGI-Modid: xfs-linux-melb:xfs-kern:30862a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In the case where we mount a filesystem which was previously using the
attr2 format as attr1, returning the default mp->m_attroffset instead of
the per-inode di_forkoff for inline attribute fit calculations, may result
in corruption, if for example, the data fork is already taking more space
than the default fork offset and we try to add an extended attribute. Fix
tested by xfstests/186.
SGI-PV: 979606
SGI-Modid: xfs-linux-melb:xfs-kern:30861a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On success, we still need to join the inode to the current transaction in
xfs_itruncate_finish(). Fixes regression from error handling changes.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30845a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfssyncd triggers the logging of superblock counters every 30s if the
filesystem is made with lazy-count=1. This will prevent disks from idling
and spinning down as there will be a log write every 30s. With the way
counter recovery works for lazy-count=1, this code is unnecessary and
provides no real benefit, so just remove it.
SGI-PV: 980145
SGI-Modid: xfs-linux-melb:xfs-kern:30840a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Fix a logic error in xfs_alloc_ag_vextent_near(). This is a regression
introduced by the error handling changes.
SGI-PV: 890084
SGI-Modid: xfs-linux-melb:xfs-kern:30838a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfsbdstrat() made all I/Os error out, good or bad. Fix it.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30836a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Unmounting the log can fail. unlikely, but it can. Catch all the error
conditions an make sure it's propagated upwards.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30833a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_log_force() is declared to return an error, but we almost never check
it. We don't need to check it in most cases; if there's a log I/O error
then we'll be shutting down the filesystem anyway and that means we'll
catch the error somewhere else.
However, on certain calls we should be returning an error - sync
transactions, fsync, sync writes, etc. so this isn't a pure black and
white distinction. Hence make xfs_log_force() a void function that issues
a warning to the syslog on error, and call _xfs_log_force() in all the
places where we actually care about the error status returned.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30832a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_buf_associate_memory() can fail, but the return is never checked.
Propagate the error through XFS_BUF_SET_PTR() so that failures are
detected.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30831a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_inactive() fails to report errors when committing the inactive
transaction. Hence we can get silent failures either finishing off the
truncation or committing the transaction. Even if we get errors, we need
to continue, so simply warn loudly to the system if we get errors here.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30830a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Catch errors from xfs_imap() in log recovery when we might be trying to
map an invalid inode number due to a corrupted log.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30829a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_iflush_fork() never returns an error. Mark it void and clean up the
code calling it that checks for errors.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30827a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On unwritten I/O completion, we fail to propagate an error when converting
the extent to a written extent. This means that the I/O silently fails.
propagate the error onto the ioend so that the inode is marked with an
error appropriately.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30826a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_bdwrite() cannot return an error; it only queues buffers to the
delayed write list and as such never encounters anything that can fail.
Mark it void.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30825a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_bawrite() can return immediate error status on async writes. Unlike
xfsbdstrat() we don't ever check the error on the buffer after the call,
so we currently do not catch errors at all here. Ensure we catch and
propagate or warn to the syslog about up-front async write errors.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30824a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfsbdstrat() is declared to return an error. That is never checked because
the error is propagated by the xfs_buf_t that is passed through the
function.
Mark xfsbdstrat() as returning void and comment the prototype on the
methods needed for error checking.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30823a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_bmap_last_offset() can fail and return an error.
xfs_iomap_write_allocate() fails to detect and propagate the error.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30802a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_free_extent() can fail, but log recovery never bothers to check if it
successfully free the extent it was supposed to. This could lead to silent
corruption during log recovery. Abort log recovery if we fail to free an
extent.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30801a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
block_truncate_page() can return errors that we currently ignore and
silently discard. We should not ever get errors reported here - an error
indicates a bug somewhere else. Hence catch the error and issue a stack
dump to the syslog because we cannot propagate the error any further up
the call chain.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30800a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_alloc_compute_aligned() returns a value based on a comparison of the
computed extent length and the minimum length allowed. This is only used
by some callers - the other four return parameters are used more often.
Hence move the comparison to the code that actually needs to do it and
make xfs_alloc_compute_aligned() a void function.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30797a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_alloc_search_busy() returns an index into the busy array if the extent
was found in the array. This is never checked, and the
xfs_alloc_search_busy() does a log force to prevent reuse of the extent
before the free transaction hits the disk. Hence the return value is
useless. Declare the function void and remove the slot number from the
tracing as well.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30796a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_trans_reserve() reports errors that should not be ignored. For
example, a shutdown filesystem will report errors through
xfs_trans_reserve() to prevent further changes from being attempted on a
damaged filesystem. Catch and propagate all error conditions from
xfs_trans_reserve().
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30794a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Christoph Hellwig