aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after. Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage. The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.
The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page. This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.
The primary APIs of concern in this care are the following and are used
by most filesystems.
find_get_page
find_lock_page
find_or_create_page
grab_cache_page_nowait
grab_cache_page_write_begin
All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not. Then
old API is preserved but is basically a thin wrapper around this core
function.
Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job. There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted. This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change. It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.
The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations. The size of the
file is 1/10th physical memory to avoid dirty page balancing. In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO. The sync results are expected to be
more stable. The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.
The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts. Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison. As async results were variable
do to writback timings, I'm only reporting the maximum figures. The sync
results were stable enough to make the mean and stddev uninteresting.
The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.
async dd
3.15.0-rc3 3.15.0-rc3
vanilla accessed-v2
ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%)
tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%)
btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%)
ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%)
xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%)
The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.
samples percentage
ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The last in-tree caller of block_write_full_page_endio() was removed in
January 2013. It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit tries to fix a bug that we can't read symlink properly with
inline data feature when the length of symlink is greater than 60 bytes
but less than extra space.
The key issue is in ext4_inode_is_fast_symlink() that it doesn't check
whether or not an inode has inline data. When the user creates a new
symlink, an inode will be allocated with MAY_INLINE_DATA flag. Then
symlink will be stored in ->i_block and extended attribute space. In
the mean time, this inode is with inline data flag. After remounting
it, ext4_inode_is_fast_symlink() function thinks that this inode is a
fast symlink so that the data in ->i_block is copied to the user, and
the data in extra space is trimmed. In fact this inode should be as a
normal symlink.
The following script can hit this bug.
#!/bin/bash
cd ${MNT}
filename=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789
rm -rf test
mkdir test
cd test
echo "hello" >$filename
ln -s $filename symlinkfile
cd
sudo umount /mnt/sda1
sudo mount -t ext4 /dev/sda1 /mnt/sda1
readlink /mnt/sda1/test/symlinkfile
After applying this patch, it will break the assumption in e2fsck
because the original implementation doesn't want to support symlink
with inline data.
Reported-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Reported-by: Ian Nartowicz <claws@nartowicz.co.uk>
Cc: Ian Nartowicz <claws@nartowicz.co.uk>
Cc: Tao Ma <tm@tao.ma>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The variable "size" is expressed as number of blocks and not as
number of clusters, this could trigger a kernel panic when using
ext4 with the size of a cluster different from the size of a block.
Cc: stable@vger.kernel.org
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tail of a page straddling inode size must be zeroed when being written
out due to POSIX requirement that modifications of mmaped page beyond
inode size must not be written to the file. ext4_bio_write_page() did
this only for blocks fully beyond inode size but didn't properly zero
blocks partially beyond inode size. Fix this.
The problem has been uncovered by mmap_11-4 test in openposix test suite
(part of LTP).
Reported-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Fixes: 5a0dc7365c
Fixes: bd2d0210cf
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove local variable "stored" from ext4_readdir(...). This variable
gets initialized but is never used inside the function.
Signed-off-by: Giedrius Rekasius <giedrius.rekasius@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
xfstests generic/091 is failing when mounting ext4 with data=journal.
I think that this regression is same problem that occurred prior to collapse
range issue. So ZERO RANGE also need to call ext4_force_commit as
collapse range.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Shuffle code around in ext4_orphan_add() and ext4_orphan_del() so that
we avoid taking global s_orphan_lock in some cases and hold it for
shorter time in other cases.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use sbi pointer consistently in ext4_orphan_del() instead of opencoding
it sometimes. Also ext4_orphan_add() uses EXT4_SB(sb) often so create
sbi variable for it as well and use it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_es_can_be_merged() when checking whether we can merge two
extents we should use EXT_MAX_BLOCKS instead of defining it manually.
Also if it is really the case we should notify userspace because clearly
there is a bug in extent status tree implementation since this should
never happen.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Caches from 'ext4_groupinfo_caches' may be in use by other mounts,
which have already existed. So, it is incorrect to destroy them when
newly requested mount fails.
Found by Linux File System Verification project (linuxtesting.org).
Signed-off-by: Andrey Tsyvarev <tsyvarev@ispras.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On a bigalloc,^flex_bg filesystem, the ext4_valid_block_bitmap
function fails to convert from blocks to clusters when spot-checking
the validity of the bitmap block that we've just read from disk. This
causes ext4 to think that the bitmap is garbage, which results in the
block group being taken offline when it's not necessary. Add in the
necessary EXT4_B2C() calls to perform the conversions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_bg_has_super() function doesn't know about the new rules for
where backup superblocks go on a sparse_super2 filesystem. Therefore,
block bitmap initialization doesn't know that it shouldn't reserve
space for backups in groups that are never going to contain backups.
The result of this is e2fsck complaining about the block bitmap being
incorrect (fortunately not in a way that results in cross-linked
files), so fix the whole thing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On a filesystem with a 1k block size, the group descriptors live in
block 2, not block 1. If the filesystem has bigalloc,meta_bg set,
however, the calculation of the group descriptor table location does
not take this into account and returns the wrong block number. Fix
the calculation to return the correct value for this case.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_xattr_set_handle() we have checked the xattr name's length. So
we should also check it in ext4_xattr_get() to avoid unneeded lookup
caused by invalid name.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we perform a data integrity sync we tag all the dirty pages with
PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check
for this tag in write_cache_pages_da and creates a struct
mpage_da_data containing contiguously indexed pages tagged with this
tag and sync these pages with a call to mpage_da_map_and_submit. This
process is done in while loop until all the PAGECACHE_TAG_TOWRITE
pages are synced. We also do journal start and stop in each iteration.
journal_stop could initiate journal commit which would call
ext4_writepage which in turn will call ext4_bio_write_page even for
delayed OR unwritten buffers. When ext4_bio_write_page is called for
such buffers, even though it does not sync them but it clears the
PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages
are also not synced by the currently running data integrity sync. We
will end up with dirty pages although sync is completed.
This could cause a potential data loss when the sync call is followed
by a truncate_pagecache call, which is exactly the case in
collapse_range. (It will cause generic/127 failure in xfstests)
To avoid this issue, we can use set_page_writeback_keepwrite instead of
set_page_writeback, which doesn't clear TOWRITE tag.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
unfortunately, Ted's changes to ext4_file_write() are *still* an
incomplete fix - playing with rlimits can let you smuggle an
unaligned request past the checks. So there almost certainly
will be more merge PITA around that place...
[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
BH can not be NULL at this point, ext4_read_dirblock() always return
non null value, and we already have done all necessery checks.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To avoid potential data races, use a spinlock which protects the raw
(on-disk) inode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Al Viro pointed out that locking for O_APPEND writes was problematic,
since the location of the write isn't known until after we take the
i_mutex, which impacts the ext4_unaligned_aio() and s_bitmap_maxbytes
check.
For O_APPEND always assume that the write is unaligned so call
ext4_unwritten_wait(). And to solve the second problem, take the
i_mutex earlier before we start the s_bitmap_maxbytes check.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit doesn't actually change anything; it just moves code
around in preparation for some code simplification work.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Copy generic_file_aio_write() into ext4_file_write(). This is part of
a patch series which allows us to simplify ext4_file_write() and
ext4_file_dio_write(), by calling __generic_file_aio_write() directly.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.
The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.
This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.
This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently EXT4_MAP_UNINIT is used in dioread_nolock case to mark the
cases where we're using dioread_nolock and we're writing into either
unallocated, or unwritten extent, because we need to make sure that
any DIO write into that inode will wait for the extent conversion.
However EXT4_MAP_UNINIT is not only entirely misleading name but also
unnecessary because we can check for EXT4_MAP_UNWRITTEN in the
dioread_nolock case instead.
This commit removes EXT4_MAP_UNINIT flag.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We had a number of new features in ext4 during this merge window
(ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
there were many more regression and bug fixes this time around. It
didn't help that xfstests hadn't been fully updated to fully stress
test COLLAPSE_RANGE until after -rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=gi42
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"These are regression and bug fixes for ext4.
We had a number of new features in ext4 during this merge window
(ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
there were many more regression and bug fixes this time around. It
didn't help that xfstests hadn't been fully updated to fully stress
test COLLAPSE_RANGE until after -rc1"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
ext4: disable COLLAPSE_RANGE for bigalloc
ext4: fix COLLAPSE_RANGE failure with 1KB block size
ext4: use EINVAL if not a regular file in ext4_collapse_range()
ext4: enforce we are operating on a regular file in ext4_zero_range()
ext4: fix extent merging in ext4_ext_shift_path_extents()
ext4: discard preallocations after removing space
ext4: no need to truncate pagecache twice in collapse range
ext4: fix removing status extents in ext4_collapse_range()
ext4: use filemap_write_and_wait_range() correctly in collapse range
ext4: use truncate_pagecache() in collapse range
ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE
ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabled
ext4: always check ext4_ext_find_extent result
ext4: fix error handling in ext4_ext_shift_extents
ext4: silence sparse check warning for function ext4_trim_extent
ext4: COLLAPSE_RANGE only works on extent-based files
ext4: fix byte order problems introduced by the COLLAPSE_RANGE patches
ext4: use i_size_read in ext4_unaligned_aio()
fs: disallow all fallocate operation on active swapfile
fs: move falloc collapse range check into the filesystem methods
...
Once COLLAPSE RANGE is be disable for ext4 with bigalloc feature till finding
root-cause of problem. It will be enable with fixing that regression of
xfstest(generic 075 and 091) again.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When formatting with 1KB or 2KB(not aligned with PAGE SIZE) block
size, xfstests generic/075 and 091 are failing. The offset supplied to
function truncate_pagecache_range is block size aligned. In this
function start offset is re-aligned to PAGE_SIZE by rounding_up to the
next page boundary. Due to this rounding up, old data remains in the
page cache when blocksize is less than page size and start offset is
not aligned with page size. In case of collapse range, we need to
align start offset to page size boundary by doing a round down
operation instead of round up.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There is a bug in ext4_ext_shift_path_extents() where if we actually
manage to merge a extent we would skip shifting the next extent. This
will result in in one extent in the extent tree not being properly
shifted.
This is causing failure in various xfstests tests using fsx or fsstress
with collapse range support. It will also cause file system corruption
which looks something like:
e2fsck 1.42.9 (4-Feb-2014)
Pass 1: Checking inodes, blocks, and sizes
Inode 20 has out of order extents
(invalid logical block 3, physical block 492938, len 2)
Clear? yes
...
when running e2fsck.
It's also very easily reproducible just by running fsx without any
parameters. I can usually hit the problem within a minute.
Fix it by increasing ex_start only if we're not merging the extent.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Currently in ext4_collapse_range() and ext4_punch_hole() we're
discarding preallocation twice. Once before we attempt to do any changes
and second time after we're done with the changes.
While the second call to ext4_discard_preallocations() in
ext4_punch_hole() case is not needed, we need to discard preallocation
right after ext4_ext_remove_space() in collapse range case because in
the case we had to restart a transaction in the middle of removing space
we might have new preallocations created.
Remove unneeded ext4_discard_preallocations() ext4_punch_hole() and move
it to the better place in ext4_collapse_range()
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're already calling truncate_pagecache() before we attempt to do any
actual job so there is not need to truncate pagecache once more using
truncate_setsize() after we're finished.
Remove truncate_setsize() and replace it just with i_size_write() note
that we're holding appropriate locks.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ext4_collapse_range() when calling ext4_es_remove_extent() to
remove status extents we're passing (EXT_MAX_BLOCKS - punch_start - 1)
in order to remove all extents from start of the collapse range to the
end of the file. However this is wrong because we might miss the
possible extent covering the last block of the file.
Fix it by removing the -1.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Currently we're passing -1 as lend argumnet for
filemap_write_and_wait_range() which is wrong since lend is signed type
so it would cause some confusion and we might not write_and_wait for the
entire range we're expecting to write.
Fix it by using LLONG_MAX instead.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We should be using truncate_pagecache() instead of
truncate_pagecache_range() in the collapse range because we're
truncating page cache from offset to the end of file.
truncate_pagecache() also get rid of the private COWed pages from the
range because we're going to shift the end of the file.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Where are some places where logic guaranties us that extent we are
searching exits, but this may not be true due to on-disk data
corruption. If such corruption happens we must prevent possible
null pointer dereferences.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Unfortunately, we weren't checking to make sure of this the inode was
extent-based before attempt operate on it. Hilarity ensues.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
This commit tries to fix some byte order issues that is found by sparse
check.
$ make M=fs/ext4 C=2 CF=-D__CHECK_ENDIAN__
...
CHECK fs/ext4/extents.c
fs/ext4/extents.c:5232:41: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5236:52: warning: bad assignment (-=) to restricted __le32
fs/ext4/extents.c:5258:45: warning: bad assignment (-=) to restricted __le32
fs/ext4/extents.c:5303:28: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5318:18: warning: incorrect type in assignment (different base types)
fs/ext4/extents.c:5318:18: expected unsigned int [unsigned] [usertype] ex_start
fs/ext4/extents.c:5318:18: got restricted __le32 [usertype] ee_block
fs/ext4/extents.c:5319:24: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5334:31: warning: incorrect type in assignment (different base types)
...
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in do_fallocate in collapse range case we're checking
whether offset + len is not bigger than i_size. However there is
nothing which would prevent i_size from changing so the check is
pointless. It should be done in the file system itself and the file
system needs to make sure that i_size is not going to change. The
i_size check for the other fallocate modes are also done in the
filesystems.
As it is now we can easily crash the kernel by having two processes
doing truncate and fallocate collapse range at the same time. This
can be reproduced on ext4 and it is theoretically possible on xfs even
though I was not able to trigger it with this simple test.
This commit removes the check from do_fallocate and adds it to the
file system.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All the checks IS_APPEND and IS_IMMUTABLE for the fallocate operation on
the inode are done in vfs. No need to do this again in ext4. Remove it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent(). Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize. That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:
CPU #1 CPU #2
down_write(&i_data_sem)
Modify i_disk_size
up_write(&i_data_sem)
down_write(&i_data_sem)
Modify i_disk_size
Copy i_disk_size to on-disk inode
up_write(&i_data_sem)
Copy i_disk_size to on-disk inode
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Return ENOMEM rather than EIO when find_get_page() fails in
ext4_mb_get_buddy_page_lock() and find_or_create_page() fails in
ext4_mb_load_buddy().
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When mounting ext4 with data=journal option, xfstest shared/002 and
shared/004 are currently failing as checksum computed for testfile
does not match with the checksum computed in other journal modes.
In case of data=journal mode, a call to filemap_write_and_wait_range
will not flush anything to disk as buffers are not marked dirty in
write_end. In collapse range this call is followed by a call to
truncate_pagecache_range. Due to this, when checksum is computed,
a portion of file is re-read from disk which replace valid data with
NULL bytes and hence the reason for the difference in checksum.
Calling ext4_force_commit before filemap_write_and_wait_range solves
the issue as it will mark the buffers dirty during commit transaction
which can be later synced by a call to filemap_write_and_wait_range.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The special handling of PF_MEMALLOC callers in ext4_write_inode()
shouldn't be necessary as there shouldn't be any. Warn about it. Also
update comment before the function as it seems somewhat outdated.
(Changes modeled on an ext3 patch posted by Jan Kara to the linux-ext4
mailing list on Februaryt 28, 2014, which apparently never went into
the ext3 tree.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
filemap_map_pages() is generic implementation of ->map_pages() for
filesystems who uses page cache.
It should be safe to use filemap_map_pages() for ->map_pages() if
filesystem use filemap_fault() for ->fault().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:
WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()
CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
[<ffffffff816311b0>] dump_stack+0x19/0x1b
[<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
[<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
[<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
[<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
[<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
[<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
[<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
[<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
[<ffffffff811935ce>] generic_setxattr+0x6e/0x90
[<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
[<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
[<ffffffff8119421e>] setxattr+0x13e/0x1e0
[<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
[<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
[<ffffffff8118c65c>] ? fget_light+0x3c/0x130
[<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
[<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
[<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
[<ffffffff816407c2>] system_call_fastpath+0x16/0x1b
The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:
CPU1 CPU2
ext4_xattr_release_block() ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
unlock_buffer(bh);
lock_buffer(bh);
/* True */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
get_bh(bh);
ext4_free_blocks()
...
jbd2_journal_forget()
jbd2_journal_unfile_buffer()
-> JH is gone
error = ext4_handle_dirty_xattr_block(handle, inode, bh);
-> triggers the warning
We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
ext4_end_bio() currently throws away the error that it receives. Chances
are this is part of a spate of errors, one of which will end up getting
the error returned to userspace somehow, but we shouldn't take that risk.
Also print out the errno to aid in debug.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
With EXT4FS_DEBUG ext4_count_free_clusters() will call
ext4_read_block_bitmap() without s_group_info initialized, so we need to
initialize multi-block allocator before.
And dependencies that must be solved, to allow this:
- multi-block allocator needs in group descriptors
- need to install s_op before initializing multi-block allocator,
because in ext4_mb_init_backend() new inode is created.
- initialize number of group desc blocks (s_gdb_count) otherwise
number of clusters returned by ext4_free_clusters_after_init() is not correct.
(see ext4_bg_num_gdb_nometa())
Here is the stack backtrace:
(gdb) bt
#0 ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430
#1 ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000,
desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0,
bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358
#2 0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000,
block_group=block_group@entry=0,
bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476
#3 0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000,
block_group=block_group@entry=0) at balloc.c:489
#4 0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665
#5 0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>,
sb=0xffff880079a10000) at super.c:2143
#6 ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>,
data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851
...
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we try to get 2^32-1 block of the file which has the extent
(ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON
in ext4_ext_put_gap_in_cache().
To avoid the problem, ext4_map_blocks() needs to check the file logical block
number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot
handle 2^32-1 because the maximum file logical block number is 2^32-2.
Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid.
So ext4_map_blocks() should also return the same errno.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
'0x7FDEADBEEF' will be truncated to 32-bit number under unicore32. Need
append 'ULL' for it.
The related warning (with allmodconfig under unicore32):
CC [M] fs/ext4/extents_status.o
fs/ext4/extents_status.c: In function "__es_remove_extent":
fs/ext4/extents_status.c:813: warning: integer constant is too large for "long" type
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=4s1Z
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
ext4: fix premature freeing of partial clusters split across leaf blocks
ext4: remove unneeded test of ret variable
ext4: fix comment typo
ext4: make ext4_block_zero_page_range static
ext4: atomically set inode->i_flags in ext4_set_inode_flags()
ext4: optimize Hurd tests when reading/writing inodes
ext4: kill i_version support for Hurd-castrated file systems
ext4: each filesystem creates and uses its own mb_cache
fs/mbcache.c: doucple the locking of local from global data
fs/mbcache.c: change block and index hash chain to hlist_bl_node
ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
ext4: refactor ext4_fallocate code
ext4: Update inode i_size after the preallocation
ext4: fix partial cluster handling for bigalloc file systems
ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
ext4: only call sync_filesystm() when remounting read-only
fs: push sync_filesystem() down to the file system's remount_fs()
jbd2: improve error messages for inconsistent journal heads
jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
jbd2: minimize region locked by j_list_lock in journal_get_create_access()
...
Pull renameat2 system call from Miklos Szeredi:
"This adds a new syscall, renameat2(), which is the same as renameat()
but with a flags argument.
The purpose of extending rename is to add cross-rename, a symmetric
variant of rename, which exchanges the two files. This allows
interesting things, which were not possible before, for example
atomically replacing a directory tree with a symlink, etc... This
also allows overlayfs and friends to operate on whiteouts atomically.
Andy Lutomirski also suggested a "noreplace" flag, which disables the
overwriting behavior of rename.
These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only
implemented for ext4 as an example and for testing"
* 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ext4: add cross rename support
ext4: rename: split out helper functions
ext4: rename: move EMLINK check up
ext4: rename: create ext4_renament structure for local vars
vfs: add cross-rename
vfs: lock_two_nondirectories: allow directory args
security: add flags to rename hooks
vfs: add RENAME_NOREPLACE flag
vfs: add renameat2 syscall
vfs: rename: use common code for dir and non-dir
vfs: rename: move d_move() up
vfs: add d_is_dir()
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.
Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We know that "ret > 0" is true here. These tests were left over from
commit 02afc27fae ('direct-io: Handle O_(D)SYNC AIO') and aren't
needed any more.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xfstests generic/311 and shared/298 fail when run on a bigalloc file
system. Kernel error messages produced during the tests report that
blocks to be freed are already on the to-be-freed list. When e2fsck
is run at the end of the tests, it typically reports bad i_blocks and
bad free blocks counts.
The bug that causes these failures is located in ext4_ext_rm_leaf().
Code at the end of the function frees a partial cluster if it's not
shared with an extent remaining in the leaf. However, if all the
extents in the leaf have been removed, the code dereferences an
invalid extent pointer (off the front of the leaf) when the check for
sharing is made. This generally has the effect of unconditionally
freeing the partial cluster, which leads to the observed failures
when the partial cluster is shared with the last extent in the next
leaf.
Fix this by attempting to free the cluster only if extents remain in
the leaf. Any remaining partial cluster will be freed if possible
when the next leaf is processed or when leaf removal is complete.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Cross rename (exchange source and dest) will need to call some of these
helpers for both source and dest, while overwriting rename currently only
calls them for one or the other. This also makes the code easier to
follow.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Move checking i_nlink from after ext4_get_first_dir_block() to before. The
check doesn't rely on the result of that function and the function only
fails on fs corruption, so the order shouldn't matter.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Need to split up ext4_rename() into helpers but there are too many local
variables involved, so create a new structure. This also, apparently,
makes the generated code size slightly smaller.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
If this flag is specified and the target of the rename exists then the
rename syscall fails with EEXIST.
The VFS does the existence checking, so it is trivial to enable for most
local filesystems. This patch only enables it in ext4.
For network filesystems the VFS check is not enough as there may be a race
between a remote create and the rename, so these filesystems need to handle
this flag in their ->rename() implementations to ensure atomicity.
Andy writes about why this is useful:
"The trivial answer: to eliminate the race condition from 'mv -i'.
Another answer: there's a common pattern to atomically create a file
with contents: open a temporary file, write to it, optionally fsync
it, close it, then link(2) it to the final name, then unlink the
temporary file.
The reason to use link(2) is because it won't silently clobber the destination.
This is annoying:
- It requires an extra system call that shouldn't be necessary.
- It doesn't work on (IMO sensible) filesystems that don't support
hard links (e.g. vfat).
- It's not atomic -- there's an intermediate state where both files exist.
- It's ugly.
The new rename flag will make this totally sensible.
To be fair, on new enough kernels, you can also use O_TMPFILE and
linkat to achieve the same thing even more cleanly."
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Currently in ext4_fallocate() and ext4_zero_range() we're testing ret
variable along with new_size. However in ext4_fallocate() we just tested
ret before and in ext4_zero_range() if will always be zero when we get
there so there is no need to test it in both cases.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's only called within inode.c, so make it static, remove its prototype
from ext4.h and move it above all of its callers so it doesn't need a
prototype within inode.c.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Set a in-memory superblock flag to indicate whether the file system is
designed to support the Hurd.
Also, add a sanity check to make sure the 64-bit feature is not set
for Hurd file systems, since i_file_acl_high conflicts with a
Hurd-specific field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The Hurd file system uses uses the inode field which is now used for
i_version for its translator block. This means that ext2 file systems
that are formatted for GNU Hurd can't be used to support NFSv4. Given
that Hurd file systems don't support extents, and a huge number of
modern file system features, this is no great loss.
If we don't do this, the attempt to update the i_version field will
stomp over the translator block field, which will cause file system
corruption for Hurd file systems. This can be replicated via:
mke2fs -t ext2 -o hurd /dev/vdc
mount -t ext4 /dev/vdc /vdc
touch /vdc/bug0000
umount /dev/vdc
e2fsck -f /dev/vdc
Addresses-Debian-Bug: #738758
Reported-By: Gabriele Giacone <1o5g4r8o@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds new interfaces to create and destory cache,
ext4_xattr_create_cache() and ext4_xattr_destroy_cache(), and remove
the cache creation and destory calls from ex4_init_xattr() and
ext4_exitxattr() in fs/ext4/xattr.c.
fs/ext4/super.c has been changed so that when a filesystem is mounted
a cache is allocated and attched to its ext4_sb_info structure.
fs/mbcache.c has been changed so that only one slab allocator is
allocated and used by all mbcache structures.
Signed-off-by: T. Makphaibulchoke <tmac@hp.com>
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.
It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents
This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.
Also add appropriate tracepoints.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move block allocation out of the ext4_fallocate into separate function
called ext4_alloc_file_blocks(). This will allow us to use the same
allocation code for other allocation operations such as zero range which
is commit in the next patch.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ext4_fallocate we would update inode size, c_time and sync
the file with every partial allocation which is entirely unnecessary. It
is true that if the crash happens in the middle of truncate we might end
up with unchanged i size, or c_time which I do not think is really a
problem - it does not mean file system corruption in any way. Note that
xfs is doing things the same way e.g. update all of the mentioned after
the allocation is done.
This commit moves all the updates after the allocation is done. In
addition we also need to change m_time as not only inode has been change
bot also data regions might have changed (unwritten extents). However
m_time will be only updated when i_size changed.
Also we do not need to be paranoid about changing the c_time only if the
actual allocation have happened, we can change it even if we try to
allocate only to find out that there are already block allocated. It's
not really a big deal and it will save us some additional complexity.
Also use ext4_debug, instead of ext4_warning in #ifdef EXT4FS_DEBUG
section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>-
--
v3: Do not remove the code to set EXT4_INODE_EOFBLOCKS flag
fs/ext4/extents.c | 96 ++++++++++++++++++++++++-------------------------------
1 file changed, 42 insertions(+), 54 deletions(-)
Commit 9cb00419fa, which enables hole punching for bigalloc file
systems, exposed a bug introduced by commit 6ae06ff51e in an earlier
release. When run on a bigalloc file system, xfstests generic/013, 068,
075, 083, 091, 100, 112, 127, 263, 269, and 270 fail with e2fsck errors
or cause kernel error messages indicating that previously freed blocks
are being freed again.
The latter commit optimizes the selection of the starting extent in
ext4_ext_rm_leaf() when hole punching by beginning with the extent
supplied in the path argument rather than with the last extent in the
leaf node (as is still done when truncating). However, the code in
rm_leaf that initially sets partial_cluster to track cluster sharing on
extent boundaries is only guaranteed to run if rm_leaf starts with the
last node in the leaf. Consequently, partial_cluster is not correctly
initialized when hole punching, and a cluster on the boundary of a
punched region that should be retained may instead be deallocated.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Code deallocating the extent path referenced by an argument to
ext4_ext_handle_uninitialized_extents was made redundant with identical
code in its one caller, ext4_ext_map_blocks, by commit 3779473246.
Allocating and deallocating the path in the same function also makes
the code clearer.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix up error messages printed when the transaction pointers in a
journal head are inconsistent. This improves the error messages which
are printed when running xfstests generic/068 in data=journal mode.
See the bug report at: https://bugzilla.kernel.org/show_bug.cgi?id=60786
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When doing filesystem wide sync, there's no need to force transaction
commit (or synchronously write inode buffer) separately for each inode
because ext4_sync_fs() takes care of forcing commit at the end (VFS
takes care of flushing buffer cache, respectively). Most of the time
this slowness doesn't manifest because previous WB_SYNC_NONE writeback
doesn't leave much to write but when there are processes aggressively
creating new files and several filesystems to sync, the sync slowness
can be noticeable. In the following test script sync(1) takes around 6
minutes when there are two ext4 filesystems mounted on a standard SATA
drive. After this patch sync takes a couple of seconds so we have about
two orders of magnitude improvement.
function run_writers
{
for (( i = 0; i < 10; i++ )); do
mkdir $1/dir$i
for (( j = 0; j < 40000; j++ )); do
dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
done &
done
}
for dir in "$@"; do
run_writers $dir
done
sleep 40
time sync
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for Ext4.
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
blocks which are present in this range and than updates all the logical
offsets of extents beyond "offset + len" to nullify the hole created by
removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While handling punch-hole fallocate, it's useless to truncate page cache
before removing the range from extent tree (or block map in indirect case)
because page cache can be re-populated (by read-ahead or read(2) or mmap-ed
read) immediately after truncating page cache, but before updating extent
tree (or block map). In that case the user will see stale data even after
fallocate is completed.
Until the problem of data corruption resulting from pages backed by
already freed blocks is fully resolved, the simple thing we can do now
is to add another truncation of pagecache after punch hole is done.
Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Adjust the conversion specifications in a few optionally compiled debug
messages to match the return type of ext4_es_status(). Also, make a
couple of minor grammatical message edits while we're at it.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When looking at a bug report with:
> kernel: EXT4-fs: 0 scanned, 0 found
I thought wow, 0 scanned, that's odd? But it's not odd; it's printing
a variable that is initialized to 0 and never touched again.
It's never been used since the original merge, so I don't really even
know what the original intent was, either.
If anyone knows how to hook it up, speak now via patch, otherwise just
yank it so it's not making a confusing situation more confusing in
kernel logs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_map_blocks() function returns the number of blocks which
satisfying the caller's request. This number of blocks requested by
the caller is specified by an unsigned integer, but the return value
of ext4_map_blocks() is a signed integer (to accomodate error codes
per the kernel's standard error signalling convention).
Historically, overflows could never happen since mballoc() will refuse
to allocate more than 2048 blocks at a time (which is something we
should fix), and if the blocks were already allocated, the fact that
there would be some number of intervening metadata blocks pretty much
guaranteed that there could never be a contiguous region of data
blocks that was greater than 2**31 blocks.
However, this is now possible if there is a file system which is a bit
bigger than 8TB, and is created using the new mke2fs hugeblock
feature, which can create a perfectly contiguous file. In that case,
if a userspace program attempted to call fallocate() on this already
fully allocated file, it's possible that ext4_map_blocks() could
return a number large enough that it would overflow a signed integer,
resulting in a ext4 thinking that the ext4_map_blocks() call had
failed with some strange error code.
Since ext4_map_blocks() is always free to return a smaller number of
blocks than what was requested by the caller, fix this by capping the
number of blocks that ext4_map_blocks() will ever try to map to 2**31
- 1. In practice this should never get hit, except by someone
deliberately trying to provke the above-described bug.
Thanks to the PaX team for asking whethre this could possibly happen
in some off-line discussions about using some static code checking
technology they are developing to find bugs in kernel code.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The lowest levels of mballoc set all of the fields of struct
ext4_free_extent except for fe_logical, since they are just trying to
find the requested free set of blocks, and the logical block hasn't
been set yet. This makes some static code checkers sad. Set it to
various different debug values, which would be useful when
debugging mballoc if these values were to ever show up due to the
parts of mballoc triyng to use ac->ac_b_ex.fe_logical before it is
properly upper layers of mballoc failing to properly set, usually by
ext4_mb_use_best_found().
Addresses-Coverity-Id: #139697
Addresses-Coverity-Id: #139698
Addresses-Coverity-Id: #139699
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_expand_extra_isize_ea() doesn't need the size of all
of the extended attribute headers. So if we don't calculate it when
it is unneeded, it we can skip some undeeded memory references, and as
a bonus, we eliminate some kvetching by static code analysis tools.
Addresses-Coverity-Id: #741291
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Avoid false positives by static code analysis tools such as sparse and
coverity caused by the fact that we set the physical block, and then
the status in the extent_status structure. It is also more efficient
to set both of these values at once.
Addresses-Coverity-Id: #989077
Addresses-Coverity-Id: #989078
Addresses-Coverity-Id: #1080722
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Commit 3779473246 breaks the return of error codes from
ext4_ext_handle_uninitialized_extents() in ext4_ext_map_blocks(). A
portion of the patch assigns that function's signed integer return
value to an unsigned int. Consequently, negatively valued error codes
are lost and can be treated as a bogus allocated block count.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
When !defined(CONFIG_EXT4_DEBUG), mb_debug() should be defined as a
no_printk() statement instead of an empty statement in order to suppress
the following compiler warning:
fs/ext4/mballoc.c: In function ‘ext4_mb_cleanup_pa’:
fs/ext4/mballoc.c:2659:47: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
mb_debug(1, "mballoc: %u PAs left\n", count);
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
"err" is zero here, there is no need to check again.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the i_crtime field is not present in the inode, don't leave the
field uninitialized.
Fixes: ef7f38359 ("ext4: Add nanosecond timestamps")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
The set_flexbg_block_bitmap() function assumed that the number of
blocks in a blockgroup was sb->blocksize * 8, which is normally true,
but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block
bitmap corruption after:
mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jon Bernard <jbernard@tuxion.com>
Cc: stable@vger.kernel.org
If a file system has a large number of inodes per block group, all of
the metadata blocks in a flex_bg may be larger than what can fit in a
single block group. Unfortunately, ext4_alloc_group_tables() in
resize.c was never tested to see if it would handle this case
correctly, and there were a large number of bugs which caused the
following sequence to result in a BUG_ON:
kernel bug at fs/ext4/resize.c:409!
...
call trace:
[<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830
[<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80
[<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00
[<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0
[<ffffffff811b9df2>] ? final_putname+0x22/0x50
[<ffffffff811c1371>] sys_ioctl+0x81/0xa0
[<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b
code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0
rip [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180
This can be reproduced with the following command sequence:
mke2fs -t ext4 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G
To fix this, we need to make sure the right thing happens when a block
group's inode table straddles two block groups, which means the
following bugs had to be fixed:
1) Not clearing the BLOCK_UNINIT flag in the second block group in
ext4_alloc_group_tables --- the was proximate cause of the BUG_ON.
2) Incorrectly determining how many block groups contained contiguous
free blocks in ext4_alloc_group_tables().
3) Incorrectly setting the start of the next block range to be marked
in use after a discontinuity in setup_new_flex_group_blocks().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
If an ext4 file system is created by some tool other than mke2fs
(perhaps by someone who has a pathalogical fear of the GPL) that
doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags,
and that file system is then mounted read-only, don't try to modify
the s_flags field. Otherwise, if dm_verity is in use, the superblock
will change, causing an dm_verity failure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
In swap_inode_boot_loader() we forgot to release ->i_mutex and resume
unlocked dio for inode and inode_bl if there is an error starting the
journal handle. This commit fixes this issue.
Reported-by: Ahmed Tamrawi <ahmedtamrawi@gmail.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org # v3.10+
Commit a115f749c1 (ext4: remove wait for unwritten extent conversion from
ext4_truncate) exposed a bug in ext4_ext_handle_uninitialized_extents().
It can be triggered by xfstest generic/299 when run on a test file
system created without a journal. This test continuously fallocates and
truncates files to which random dio/aio writes are simultaneously
performed by a separate process. The test completes successfully, but
if the test filesystem is mounted with the block_validity option, a
warning message stating that a logical block has been mapped to an
illegal physical block is posted in the kernel log.
The bug occurs when an extent is being converted to the written state
by ext4_end_io_dio() and ext4_ext_handle_uninitialized_extents()
discovers a mapping for an existing uninitialized extent. Although it
sets EXT4_MAP_MAPPED in map->m_flags, it fails to set map->m_pblk to
the discovered physical block number. Because map->m_pblk is not
otherwise initialized or set by this function or its callers, its
uninitialized value is returned to ext4_map_blocks(), where it is
stored as a bogus mapping in the extent status tree.
Since map->m_pblk can accidentally contain illegal values that are
larger than the physical size of the file system, calls to
check_block_validity() in ext4_map_blocks() that are enabled if the
block_validity mount option is used can fail, resulting in the logged
warning message.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org # 3.11+
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support)
when sync_page_range() had been introduced; generic_file_write{,v}() correctly
synced
pos_after_write - written .. pos_after_write - 1
but generic_file_aio_write() synced
pos_before_write .. pos_before_write + written - 1
instead. Which is not the same thing with O_APPEND, obviously.
A couple of years later correct variant had been killed off when
everything switched to use of generic_file_aio_write().
All users of generic_file_aio_write() are affected, and the same bug
has been copied into other instances of ->aio_write().
The fix is trivial; the only subtle point is that generic_write_sync()
ought to be inlined to avoid calculations useless for the majority of
calls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
functionality for bigalloc file systems.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ofDv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Bug fixes and cleanups for ext4. We also enable the punch hole
functionality for bigalloc file systems"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: delete "set but not used" variables
ext4: don't pass freed handle to ext4_walk_page_buffers
ext4: avoid clearing beyond i_blocks when truncating an inline data file
ext4: ext4_inode_is_fast_symlink should use EXT4_CLUSTER_SIZE
ext4: fix a typo in extents.c
ext4: use %pd printk specificer
ext4: standardize error handling in ext4_da_write_inline_data_begin()
ext4: retry allocation when inline->extent conversion failed
ext4: enable punch hole for bigalloc
Pull vfs updates from Al Viro:
"Assorted stuff; the biggest pile here is Christoph's ACL series. Plus
assorted cleanups and fixes all over the place...
There will be another pile later this week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
__dentry_path() fixes
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.
Fix race when checking i_size on direct i/o read
hfsplus: remove can_set_xattr
nfsd: use get_acl and ->set_acl
fs: remove generic_acl
nfs: use generic posix ACL infrastructure for v3 Posix ACLs
gfs2: use generic posix ACL infrastructure
jfs: use generic posix ACL infrastructure
xfs: use generic posix ACL infrastructure
reiserfs: use generic posix ACL infrastructure
ocfs2: use generic posix ACL infrastructure
jffs2: use generic posix ACL infrastructure
hfsplus: use generic posix ACL infrastructure
f2fs: use generic posix ACL infrastructure
ext2/3/4: use generic posix ACL infrastructure
btrfs: use generic posix ACL infrastructure
fs: make posix_acl_create more useful
fs: make posix_acl_chmod more useful
...
Rename the current posix_acl_created to __posix_acl_create and add
a fully featured helper to set up the ACLs on file creation that
uses get_acl().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_chmod to __posix_acl_chmod and add
a fully featured ACL chmod helper that uses the ->set_acl inode
operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For 3.14-rc1 there are fixes in the areas of remote attributes, discard,
growfs, memory leaks in recovery, directory v2, quotas, the MAINTAINERS
file, allocation alignment, extent list locking, and in
xfs_bmapi_allocate. There are cleanups in xfs_setsize_buftarg, removing
unused macros, quotas, setattr, and freeing of inode clusters. The
in-memory and on-disk log format have been decoupled, a common helper to
calculate the number of blocks in an inode cluster has been added, and
handling of i_version has been pulled into the filesystems that use it.
- cleanup in xfs_setsize_buftarg
- removal of remaining unused flags for vop toss/flush/flushinval
- fix for memory corruption in xfs_attrlist_by_handle
- fix for out-of-date comment in xfs_trans_dqlockedjoin
- fix for discard if range length is less than one block
- fix for overrun of agfl buffer using growfs on v4 superblock filesystems
- pull i_version handling out into the filesystems that use it
- don't leak recovery items on error
- fix for memory leak in xfs_dir2_node_removename
- several cleanups for quotas
- fix bad assertion in xfs_qm_vop_create_dqattach
- cleanup for xfs_setattr_mode, and add xfs_setattr_time
- fix quota assert in xfs_setattr_nonsize
- fix an infinite loop when turning off group/project quota before user
quota
- fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
with large directory block sizes
- fix Dave's email address in MAINTAINERS
- cleanup calculation of freed inode cluster blocks
- fix alignment of initial file allocations to match filesystem geometry
- decouple in-memory and on-disk log format
- introduce a common helper to calculate the number of filesystem
blocks in an inode cluster
- fixes for extent list locking
- fix for off-by-one in xfs_attr3_rmt_verify
- fix for missing destroy_work_on_stack in xfs_bmapi_allocate
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=t8nB
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"This is primarily bug fixes, many of which you already have. New
stuff includes a series to decouple the in-memory and on-disk log
format, helpers in the area of inode clusters, and i_version handling.
We decided to try to use more topic branches this release, so there
are some merge commits in there on account of that. I'm afraid I
didn't do a good job of putting meaningful comments in the first
couple of merges. Sorry about that. I think I have the hang of it
now.
For 3.14-rc1 there are fixes in the areas of remote attributes,
discard, growfs, memory leaks in recovery, directory v2, quotas, the
MAINTAINERS file, allocation alignment, extent list locking, and in
xfs_bmapi_allocate. There are cleanups in xfs_setsize_buftarg,
removing unused macros, quotas, setattr, and freeing of inode
clusters. The in-memory and on-disk log format have been decoupled, a
common helper to calculate the number of blocks in an inode cluster
has been added, and handling of i_version has been pulled into the
filesystems that use it.
- cleanup in xfs_setsize_buftarg
- removal of remaining unused flags for vop toss/flush/flushinval
- fix for memory corruption in xfs_attrlist_by_handle
- fix for out-of-date comment in xfs_trans_dqlockedjoin
- fix for discard if range length is less than one block
- fix for overrun of agfl buffer using growfs on v4 superblock
filesystems
- pull i_version handling out into the filesystems that use it
- don't leak recovery items on error
- fix for memory leak in xfs_dir2_node_removename
- several cleanups for quotas
- fix bad assertion in xfs_qm_vop_create_dqattach
- cleanup for xfs_setattr_mode, and add xfs_setattr_time
- fix quota assert in xfs_setattr_nonsize
- fix an infinite loop when turning off group/project quota before
user quota
- fix for temporary buffer allocation failure in xfs_dir2_block_to_sf
with large directory block sizes
- fix Dave's email address in MAINTAINERS
- cleanup calculation of freed inode cluster blocks
- fix alignment of initial file allocations to match filesystem
geometry
- decouple in-memory and on-disk log format
- introduce a common helper to calculate the number of filesystem
blocks in an inode cluster
- fixes for extent list locking
- fix for off-by-one in xfs_attr3_rmt_verify
- fix for missing destroy_work_on_stack in xfs_bmapi_allocate"
* tag 'xfs-for-linus-v3.14-rc1' of git://oss.sgi.com/xfs/xfs: (51 commits)
xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
xfs: fix off-by-one error in xfs_attr3_rmt_verify
xfs: assert that we hold the ilock for extent map access
xfs: use xfs_ilock_attr_map_shared in xfs_attr_list_int
xfs: use xfs_ilock_attr_map_shared in xfs_attr_get
xfs: use xfs_ilock_data_map_shared in xfs_qm_dqiterate
xfs: use xfs_ilock_data_map_shared in xfs_qm_dqtobp
xfs: take the ilock around xfs_bmapi_read in xfs_zero_remaining_bytes
xfs: reinstate the ilock in xfs_readdir
xfs: add xfs_ilock_attr_map_shared
xfs: rename xfs_ilock_map_shared
xfs: remove xfs_iunlock_map_shared
xfs: no need to lock the inode in xfs_find_handle
xfs: use xfs_icluster_size_fsb in xfs_imap
xfs: use xfs_icluster_size_fsb in xfs_ifree_cluster
xfs: use xfs_icluster_size_fsb in xfs_ialloc_inode_init
xfs: use xfs_icluster_size_fsb in xfs_bulkstat
xfs: introduce a common helper xfs_icluster_size_fsb
xfs: get rid of XFS_IALLOC_BLOCKS macros
xfs: get rid of XFS_INODE_CLUSTER_SIZE macros
...
This is harmless, since ext4_walk_page_buffers only passes the handle
onto the callback function, and in this call site the function in
question, bput_one(), doesn't actually use the handle. But there's no
point passing in an invalid handle, and it creates a Coverity warning,
so let's just clean it up.
Addresses-Coverity-Id: #1091168
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
A missing cast means that when we are truncating a file which is less
than 60 bytes, we don't clear the correct area of memory, and in fact
we can end up truncating the next inode in the inode table, or worse
yet, some other kernel data structure.
Addresses-Coverity-Id: #751987
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Can be reproduced by xfstests 62 with bigalloc and 128bit size inode.
Signed-off-by: Yongqiang Yang <yangyongqiang01@baidu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Use the new %pd printk() specifier in Ext4 to replace passing of
dentry name or dentry name and name length * 2 with just passing the
dentry.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: Andreas Dilger <adilger.kernel@dilger.ca>
cc: linux-ext4@vger.kernel.org
The function has a bit non-standard (for ext4) error recovery in that it
used a mix of 'out' labels and testing for 'handle' being NULL. There
isn't a good reason for that in the function so clean it up a bit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Similarly as other ->write_begin functions in ext4, also
ext4_da_write_inline_data_begin() should retry allocation if the
conversion failed because of ENOSPC. This avoids returning ENOSPC
prematurely because of uncommitted block deletions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After applied this commit (d23142c6), ext4 has supported punch hole for
a file system with bigalloc feature. But we forgot to enable it. This
commit fixes it.
Cc: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit f5a44db5d2 introduced a regression on filesystems created with
the bigalloc feature (cluster size > blocksize). It causes xfstests
generic/006 and /013 to fail with an unexpected JBD2 failure and
transaction abort that leaves the test file system in a read only state.
Other xfstests run on bigalloc file systems are likely to fail as well.
The cause is the accidental use of a cluster mask where a cluster
offset was needed in ext4_ext_map_blocks().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
=/4/R
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc6' into for-3.14/core
Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.
Fixup merge issues related to the immutable biovec changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conflicts:
block/blk-flush.c
fs/btrfs/check-integrity.c
fs/btrfs/extent_io.c
fs/btrfs/scrub.c
fs/logfs/dev_bdev.c
The missing casts can cause the high 64-bits of the physical blocks to
be lost. Set up new macros which allows us to make sure the right
thing happen, even if at some point we end up supporting larger
logical block numbers.
Thanks to the Emese Revfy and the PaX security team for reporting this
issue.
Reported-by: PaX Team <pageexec@freemail.hu>
Reported-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Akira-san has been reporting rare deadlocks of his machine when running
xfstests test 269 on ext4 filesystem. The problem turned out to be in
ext4_da_reserve_metadata() and ext4_da_reserve_space() which called
ext4_should_retry_alloc() while holding i_data_sem. Since
ext4_should_retry_alloc() can force a transaction commit, this is a
lock ordering violation and leads to deadlocks.
Fix the problem by just removing the retry loops. These functions should
just report ENOSPC to the caller (e.g. ext4_da_write_begin()) and that
function must take care of retrying after dropping all necessary locks.
Reported-and-tested-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
When the filesystem doesn't support extents (like in ext2/3
compatibility modes), there is no need to reserve any clusters. Space
estimates for writing are exact, hole punching doesn't need new
metadata, and there are no unwritten extents to convert.
This fixes a problem when filesystem still having some free space when
accessed with a native ext2/3 driver suddently reports ENOSPC when
accessed with ext4 driver.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
That thing should be del_timer_sync(); consider what happens
if ext4_put_super() call of del_timer() happens to come just as it's
getting run on another CPU. Since that timer reschedules itself
to run next day, you are pretty much guaranteed that you'll end up
with kfree'd scheduled timer, with usual fun consequences. AFAICS,
that's -stable fodder all way back to 2010... [the second del_timer_sync()
is almost certainly not needed, but it doesn't hurt either]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently notify_change directly updates i_version for size updates,
which not only is counter to how all other fields are updated through
struct iattr, but also breaks XFS, which need inode updates to happen
under its own lock, and synchronized to the structure that gets written
to the log.
Remove the update in the common code, and it to btrfs and ext4,
XFS already does a proper updaste internally and currently gets a
double update with the existing code.
IMHO this is 3.13 and -stable material and should go in through the XFS
tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
A corrupted ext4 may have out of order leaf extents, i.e.
extent: lblk 0--1023, len 1024, pblk 9217, flags: LEAF UNINIT
extent: lblk 1000--2047, len 1024, pblk 10241, flags: LEAF UNINIT
^^^^ overlap with previous extent
Reading such extent could hit BUG_ON() in ext4_es_cache_extent().
BUG_ON(end < lblk);
The problem is that __read_extent_tree_block() tries to cache holes as
well but assumes 'lblk' is greater than 'prev' and passes underflowed
length to ext4_es_cache_extent(). Fix it by checking for overlapping
extents in ext4_valid_extent_entries().
I hit this when fuzz testing ext4, and am able to reproduce it by
modifying the on-disk extent by hand.
Also add the check for (ee_block + len - 1) in ext4_valid_extent() to
make sure the value is not overflow.
Ran xfstests on patched ext4 and no regression.
Cc: Lukáš Czerner <lczerner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
While it's true that errors can only happen if there is a bug in
jbd2_journal_dirty_metadata(), if a bug does happen, we need to halt
the kernel or remount the file system read-only in order to avoid
further data loss. The ext4_journal_abort_handle() function doesn't
do any of this, and while it's likely that this call (since it doesn't
adjust refcounts) will likely result in the file system eventually
deadlocking since the current transaction will never be able to close,
it's much cleaner to call let ext4's error handling system deal with
this situation.
There's a separate bug here which is that if certain jbd2 errors
errors occur and file system is mounted errors=continue, the file
system will probably eventually end grind to a halt as described
above. But things have been this way in a long time, and usually when
we have these sorts of errors it's pretty much a disaster --- and
that's why the jbd2 layer aggressively retries memory allocations,
which is the most likely cause of these jbd2 errors.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
With immutable biovecs we don't want code accessing bi_io_vec directly -
the uses this patch changes weren't incorrect since they all own the
bio, but it makes the code harder to audit for no good reason - also,
this will help with multipage bvecs later.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=F4g3
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 changes from Ted Ts'o:
"Ext4 updates for 3.13. Mostly bug fixes and cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add prototypes for macro-generated functions
ext4: return non-zero st_blocks for inline data
ext4: use prandom_u32() instead of get_random_bytes()
ext4: remove unreachable code after ext4_can_extents_be_merged()
ext4: remove unreachable code in ext4_can_extents_be_merged()
ext4: avoid bh leak in retry path of ext4_expand_extra_isize_ea()
ext4: don't count free clusters from a corrupt block group
ext4: fix FITRIM in no journal mode
ext4: drop set but otherwise unused variable from ext4_add_dirent_to_inline()
ext4: change ext4_read_inline_dir() to return 0 on success
ext4: pair trace_ext4_writepages & trace_ext4_writepages_result
ext4: add ratelimiting to ext4 messages
ext4: fix performance regression in ext4_writepages
ext4: fixup kerndoc annotation of mpage_map_and_submit_extent()
ext4: fix assertion in ext4_add_complete_io()
Pull vfs updates from Al Viro:
"All kinds of stuff this time around; some more notable parts:
- RCU'd vfsmounts handling
- new primitives for coredump handling
- files_lock is gone
- Bruce's delegations handling series
- exportfs fixes
plus misc stuff all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
ecryptfs: ->f_op is never NULL
locks: break delegations on any attribute modification
locks: break delegations on link
locks: break delegations on rename
locks: helper functions for delegation breaking
locks: break delegations on unlink
namei: minor vfs_unlink cleanup
locks: implement delegations
locks: introduce new FL_DELEG lock flag
vfs: take i_mutex on renamed file
vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
vfs: don't use PARENT/CHILD lock classes for non-directories
vfs: pull ext4's double-i_mutex-locking into common code
exportfs: fix quadratic behavior in filehandle lookup
exportfs: better variable name
exportfs: move most of reconnect_path to helper function
exportfs: eliminate unused "noprogress" counter
exportfs: stop retrying once we race with rename/remove
exportfs: clear DISCONNECTED on all parents sooner
exportfs: more detailed comment for path_reconnect
...
It isn't very easy to find the declarations for the functions created
by EXT4_INODE_BIT_FNS() because the names are generated by macros:
ext4_test_inode_flag, ext4_set_inode_flag, ext4_clear_inode_flag
ext4_test_inode_state, ext4_set_inode_state, ext4_clear_inode_state
Add explicit declarations for these functions so that grep and tags
can find them.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Return a non-zero st_blocks to userspace for statfs() and friends.
Some versions of tar will assume that files with st_blocks == 0
do not contain any data and will skip reading them entirely.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We want to do this elsewhere as well.
Also catch any attempts to use it for directories (where this ordering
would conflict with ancestor-first directory ordering in lock_rename).
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Many of the uses of get_random_bytes() do not actually need
cryptographically secure random numbers. Replace those uses with a
call to prandom_u32(), which is faster and which doesn't consume
entropy from the /dev/random driver.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit ec22ba8e ("ext4: disable merging of uninitialized extents")
ensured that if either extent under consideration is uninit, we
decline to merge, and ext4_can_extents_be_merged() returns false.
So there is no need for the caller to then test whether the
extent under consideration is unitialized; if it were, we
wouldn't have gotten that far.
The comments were also inaccurate; ext4_can_extents_be_merged()
no longer XORs the states, it fails if *either* is uninit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Commit ec22ba8e ("ext4: disable merging of uninitialized extents")
ensured that if either extent under consideration is uninit, we
decline to merge, and immediately return.
But right after that test, we test again for an uninit
extent; we can never hit this. So just remove the impossible
test and associated variable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
A bg that's been flagged "corrupt" by definition has no free blocks,
so that the allocator won't be tempted to use the damaged bg.
Therefore, we shouldn't count the clusters in the damaged group when
calculating free counts.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
When using FITRIM ioctl on a file system without journal it will
only trim the block group once, no matter how many times you invoke
FITRIM ioctl and how many block you release from the block group.
It is because we only clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT in journal
callback. Fix this by clearing the bit in no journal mode as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jorge Fábregas <jorge.fabregas@gmail.com>
In ext4_read_inline_dir(), if there is inline data, the successful
return value is the return value of ext4_read_inline_data(). Howewer,
this is used by ext4_readdir(), and while it seems harmless to return
a positive value on success, it's inconsistent, since historically
we've always return 0 on success.
Signed-off-by: BoxiLiu <lewis.liulei@huawei.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Tao Ma <boyu.mt@taobao.com>
Pair the two trace events to make troubeshooting writepages
easier, and it should be more convinient to write a simple script
to parse the traces.
Cc: linux-ext4@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the case of a storage device that suddenly disappears, or in the
case of significant file system corruption, this can result in a huge
flood of messages being sent to the console. This can overflow the
file system containing /var/log/messages, or if a serial console is
configured, this can slow down the system so much that a hardware
watchdog can end up triggering forcing a system reboot.
Google-Bug-Id: 7258357
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 4e7ea81db5(ext4: restructure writeback path) introduces another
performance regression on random write:
- one more page may be added to ext4 extent in
mpage_prepare_extent_to_map, and will be submitted for I/O so
nr_to_write will become -1 before 'done' is set
- the worse thing is that dirty pages may still be retrieved from page
cache after nr_to_write becomes negative, so lots of small chunks
can be submitted to block device when page writeback is catching up
with write path, and performance is hurted.
On one arm A15 board with sata 3.0 SSD(CPU: 1.5GHz dura core, RAM:
2GB, SATA controller: 3.0Gbps), this patch can improve below test's
result from 157MB/sec to 174MB/sec(>10%):
dd if=/dev/zero of=./z.img bs=8K count=512K
The above test is actually prototype of block write in bonnie++
utility.
This patch makes sure no more pages than nr_to_write can be added to
extent for mapping, so that nr_to_write won't become negative.
Cc: linux-ext4@vger.kernel.org
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull tmpfile fix from Al Viro:
"A fix for double iput() in ->tmpfile() on ext3 and ext4; I'd fucked it
up, Miklos has caught it"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext[34]: fix double put in tmpfile
Document give_up_on_write argument of mpage_map_and_submit_extent().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It doesn't make sense to require io_end->handle when we are in
nojournal mode. So update the assertion accordingly to avoid false
warnings from ext4_add_complete_io().
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we take the 2nd retry path in ext4_expand_extra_isize_ea, we
potentionally return from the function without having freed these
allocations. If we don't do the return, we over-write the previous
allocation pointers, so we leak either way.
Spotted with Coverity.
[ Fixed by tytso to set is and bs to NULL after freeing these
pointers, in case in the retry loop we later end up triggering an
error causing a jump to cleanup, at which point we could have a double
free bug. -- Ted ]
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable@vger.kernel.org
The Linux Kernel Performance project guys have reported that commit
4e7ea81db5 introduces a performance regression for the following fio
workload:
[global]
direct=0
ioengine=mmap
size=1500M
bs=4k
pre_read=1
numjobs=1
overwrite=1
loops=5
runtime=300
group_reporting
invalidate=0
directory=/mnt/
file_service_type=random:36
file_service_type=random:36
[job0]
startdelay=0
rw=randrw
filename=data0/f1:data0/f2
[job1]
startdelay=0
rw=randrw
filename=data0/f2:data0/f1
...
[job7]
startdelay=0
rw=randrw
filename=data0/f2:data0/f1
The culprit of the problem is that after the commit ext4_writepages()
are more aggressive in writing back pages. Thus we have less consecutive
dirty pages resulting in more seeking.
This increased aggressivity is caused by a bug in the condition
terminating ext4_writepages(). We start writing from the beginning of
the file even if we should have terminated ext4_writepages() because
wbc->nr_to_write <= 0.
After fixing the condition the throughput of the fio workload is about 20%
better than before writeback reorganization.
Reported-by: "Yan, Zheng" <zheng.z.yan@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Merge more patches from Andrew Morton:
"The rest of MM. Plus one misc cleanup"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
mm/Kconfig: add MMU dependency for MIGRATION.
kernel: replace strict_strto*() with kstrto*()
mm, thp: count thp_fault_fallback anytime thp fault fails
thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
thp: do_huge_pmd_anonymous_page() cleanup
thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
mm: cleanup add_to_page_cache_locked()
thp: account anon transparent huge pages into NR_ANON_PAGES
truncate: drop 'oldsize' truncate_pagecache() parameter
mm: make lru_add_drain_all() selective
memcg: document cgroup dirty/writeback memory statistics
memcg: add per cgroup writeback pages accounting
memcg: check for proper lock held in mem_cgroup_update_page_stat
memcg: remove MEMCG_NR_FILE_MAPPED
memcg: reduce function dereference
memcg: avoid overflow caused by PAGE_ALIGN
memcg: rename RESOURCE_MAX to RES_COUNTER_MAX
memcg: correct RESOURCE_MAX to ULLONG_MAX
mm: memcg: do not trap chargers with full callstack on OOM
mm: memcg: rework and document OOM waiting and wakeup
...
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression"). Let's drop it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the filesystem shrinkers to use the new API, and standardise some
of the behaviours of the shrinkers at the same time. For example,
nr_to_scan means the number of objects to scan, not the number of objects
to free.
I refactored the CIFS idmap shrinker a little - it really needs to be
broken up into a shrinker per tree and keep an item count with the tree
root so that we don't need to walk the tree every time the shrinker needs
to count the number of objects in the tree (i.e. all the time under
memory pressure).
[glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree]
[assorted fixes folded in]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull trivial tree from Jiri Kosina:
"The usual trivial updates all over the tree -- mostly typo fixes and
documentation updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
doc: Documentation/cputopology.txt fix typo
treewide: Convert retrun typos to return
Fix comment typo for init_cma_reserved_pageblock
Documentation/trace: Correcting and extending tracepoint documentation
mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
power: Documentation: Update s2ram link
doc: fix a typo in Documentation/00-INDEX
Documentation/printk-formats.txt: No casts needed for u64/s64
doc: Fix typo "is is" in Documentations
treewide: Fix printks with 0x%#
zram: doc fixes
Documentation/kmemcheck: update kmemcheck documentation
doc: documentation/hwspinlock.txt fix typo
PM / Hibernate: add section for resume options
doc: filesystems : Fix typo in Documentations/filesystems
scsi/megaraid fixed several typos in comments
ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
page_isolation: Fix a comment typo in test_pages_isolated()
doc: fix a typo about irq affinity
...
Pull vfs pile 1 from Al Viro:
"Unfortunately, this merge window it'll have a be a lot of small piles -
my fault, actually, for not keeping #for-next in anything that would
resemble a sane shape ;-/
This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
components) + several long-standing patches from various folks.
There definitely will be a lot more (starting with Miklos'
check_submount_and_drop() series)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
direct-io: Handle O_(D)SYNC AIO
direct-io: Implement generic deferred AIO completions
add formats for dentry/file pathnames
kvm eventfd: switch to fdget
powerpc kvm: use fdget
switch fchmod() to fdget
switch epoll_ctl() to fdget
switch copy_module_from_fd() to fdget
git simplify nilfs check for busy subtree
ibmasmfs: don't bother passing superblock when not needed
don't pass superblock to hypfs_{mkdir,create*}
don't pass superblock to hypfs_diag_create_files
don't pass superblock to hypfs_vm_create_files()
oprofile: get rid of pointless forward declarations of struct super_block
oprofilefs_create_...() do not need superblock argument
oprofilefs_mkdir() doesn't need superblock argument
don't bother with passing superblock to oprofile_create_stats_files()
oprofile: don't bother with passing superblock to ->create_files()
don't bother passing sb to oprofile_create_files()
coh901318: don't open-code simple_read_from_buffer()
...
Call generic_write_sync() from the deferred I/O completion handler if
O_DSYNC is set for a write request. Also make sure various callers
don't call generic_write_sync if the direct I/O code returns
-EIOCBQUEUED.
Based on an earlier patch from Jan Kara <jack@suse.cz> with updates from
Jeff Moyer <jmoyer@redhat.com> and Darrick J. Wong <darrick.wong@oracle.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add support to the core direct-io code to defer AIO completions to user
context using a workqueue. This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.
The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.
Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara. I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.
JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always been a hassle that if an external journal's
device number changes, the filesystem won't mount.
And since boot-time enumeration can change, device number
changes aren't unusual.
The current mechanism to update the journal location is by
passing in a mount option w/ a new devnum, but that's a hassle;
it's a manual approach, fixing things after the fact.
Adding a mount option, "-o journal_path=/dev/$DEVICE" would
help, since then we can do i.e.
# mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ...
and it'll mount even if the devnum has changed, as shown here:
# losetup /dev/loop0 journalfile
# mke2fs -L mylabel-journal -O journal_dev /dev/loop0
# mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1
Change the journal device number:
# losetup -d /dev/loop0
# losetup /dev/loop1 journalfile
And today it will fail:
# mount /dev/sdb1 /mnt/test
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
# dmesg | tail -n 1
[17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal
But with this new mount option, we can specify the new path:
# mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test
#
(which does update the encoded device number, incidentally):
# umount /dev/sdb1
# dumpe2fs -h /dev/sdb1 | grep "Journal device"
dumpe2fs 1.41.12 (17-May-2010)
Journal device: 0x0701
But best of all we can just always mount by journal-path, and
it'll always work:
# mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test
#
So the journal_path option can be specified in fstab, and as long as
the disk is available somewhere, and findable by label (or by UUID),
we can mount.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
If the group descriptor fails validation, mark the whole blockgroup
corrupt so that the inode/block allocators skip this group. The
previous approach takes the risk of writing to a damaged group
descriptor; hopefully it was never the case that the [ib]bitmap fields
pointed to another valid block and got dirtied, since the memset would
fill the page with 1s.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we detect either a discrepancy between the inode bitmap and the
inode counts or the inode bitmap fails to pass validation checks, mark
the block group corrupt and refuse to allocate or deallocate inodes
from the group.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we notice a block-bitmap corruption (because of device failure or
something else), we should mark this group as corrupt and prevent
further block allocations/deallocations from it. Currently, we end up
generating one error message for every block in the bitmap. This
potentially could make the system unstable as noticed in some
bugs. With this patch, the error will be printed only the first time
and mark the entire block group as corrupted. This prevents future
access allocations/deallocations from it.
Also tested by corrupting the block
bitmap and forcefully introducing the mb_free_blocks error:
(1) create a largefile (2Gb)
$ dd if=/dev/zero of=largefile oflag=direct bs=10485760 count=200
(2) umount filesystem. use dumpe2fs to see which block-bitmaps
are in use by largefile and note their block numbers
(3) use dd to zero-out the used block bitmaps
$ dd if=/dev/zero of=/dev/hdc4 bs=4096 seek=14 count=8 oflag=direct
(4) mount the FS and delete the largefile.
(5) recreate the largefile. verify that the new largefile does not
get any blocks from the groups marked as bad.
Without the patch, we will see mb_free_blocks error for each bit in
each zero'ed out bitmap at (4). With the patch, we only see the error
once per blockgroup:
[ 309.706803] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 15: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.720824] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 14: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.732858] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.748321] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 13: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.760331] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.769695] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 12: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.781721] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.798166] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 11: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
[ 309.810184] EXT4-fs error (device sdb4) in ext4_free_blocks:4802: IO failure
[ 309.819532] EXT4-fs error (device sdb4): ext4_mb_generate_buddy:735: group 10: 32768 clusters in bitmap, 0 in gd. blk grp corrupted.
Google-Bug-Id: 7258357
[darrick.wong@oracle.com]
Further modifications (by Darrick) to make more obvious that this corruption
bit applies to blocks only. Set the corruption flag if the block group bitmap
verification fails.
Original-author: Aditya Kali <adityakali@google.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The block_group parameter to ext4_validate_block_bitmap is both used
as a ext4_group_t inside the function and the same type is passed in
by all callers. We might as well use the typedef consistently instead
of open-coding the 'unsigned int'.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The block bitmap verification code assumes that calling ext4_error()
either panics the system or makes the fs readonly. However, this is
not always true: when 'errors=continue' is specified, an error is
printed but we don't return any indication of error to the caller,
which is (probably) the block allocator, which pretends that the crud
we read in off the disk is a usable bitmap. Yuck.
A block bitmap that fails the check should at least return no bitmap
to the caller. The block allocator should be told to go look in a
different group, but that's a separate issue.
The easiest way to reproduce this is to modify bg_block_bitmap (on a
^flex_bg fs) to point to a block outside the block group; or you can
create a metadata_csum filesystem and zero out the block bitmaps.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
After applied the commit (4a092d73), we have reduced the number of
source files that need to #include ext4_extents.h. But we can do
better.
This commit defines ext4_zeroout_es() in extents.c and move
EXT_MAX_BLOCKS into ext4.h in order not to include ext4_extents.h in
indirect.c and ioctl.c. Meanwhile we just need to include this file in
extent_status.c when ES_AGGRESSIVE_TEST is defined. Otherwise, this
commit removes a duplicated declaration in trace/events/ext4.h.
After applied this patch, we just need to include ext4_extents.h file
in {super,migrate,move_extents,extents}.c, and it is easy for us to
define a new extent disk layout.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use wait_for_stable_page() instead of wait_on_page_writeback()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
If ext_debugging is enabled and path[depth].p_ext is NULL, len
and lblock are printed non initialized
Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't emit OOM warnings when k.alloc calls fail when
there there is a v.alloc immediately afterwards.
Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The following race can lead to a loss of i_disksize update from truncate
thus resulting in a wrong inode size if the inode size isn't updated
again before inode is reclaimed:
ext4_setattr() mpage_map_and_submit_extent()
EXT4_I(inode)->i_disksize = attr->ia_size;
... ...
disksize = ((loff_t)mpd->first_page) << PAGE_CACHE_SHIFT
/* False because i_size isn't
* updated yet */
if (disksize > i_size_read(inode))
/* True, because i_disksize is
* already truncated */
if (disksize > EXT4_I(inode)->i_disksize)
/* Overwrite i_disksize
* update from truncate */
ext4_update_i_disksize()
i_size_write(inode, attr->ia_size);
For other places updating i_disksize such race cannot happen because
i_mutex prevents these races. Writeback is the only place where we do
not hold i_mutex and we cannot grab it there because of lock ordering.
We fix the race by doing both i_disksize and i_size update in truncate
atomically under i_data_sem and in mpage_map_and_submit_extent() we move
the check against i_size under i_data_sem as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Merge conditions in ext4_setattr() handling inode size changes, also
move ext4_begin_ordered_truncate() call somewhat earlier because it
simplifies error recovery in case of failure. Also add error handling in
case i_disksize update fails.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Inode size can arbitrarily change while writeback is in progress. When
ext4_writepages() has prepared a long extent for mapping and truncate
then reduces i_size, mpage_map_and_submit_buffers() will always map just
one buffer in a page instead of all of them due to lblk < blocks check.
So we end up not using all blocks we've allocated (thus leaking them)
and also delalloc accounting goes wrong manifesting as a warning like:
ext4_da_release_space:1333: ext4_da_release_space: ino 12, to_free 1
with only 0 reserved data blocks
Note that the problem can happen only when blocksize < pagesize because
otherwise we have only a single buffer in the page.
Fix the problem by removing the size check from the mapping loop. We
have an extent allocated so we have to use it all before checking for
i_size. We also rename add_page_bufs_to_extent() to
mpage_process_page_bufs() and make that function submit the page for IO
if all buffers (upto EOF) in it are mapped.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Zheng Liu <gnehzuil.liu@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently the logic whether the current buffer can be added to an extent
of buffers to map is split between mpage_add_bh_to_extent() and
add_page_bufs_to_extent(). Move the whole logic to
mpage_add_bh_to_extent() which makes things a bit more straightforward
and make following i_size fixes easier.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
reaim workfile.dbase test easily triggers warning in
ext4_da_update_reserve_space():
EXT4-fs warning (device ram0): ext4_da_update_reserve_space:365:
ino 12, allocated 1 with only 0 reserved metadata blocks (releasing 1
blocks with reserved 9 data blocks)
The problem is that (one of) tests creates file and then randomly writes
to it with O_SYNC. That results in writing back pages of the file in
random order so we create extents for written blocks say 0, 2, 4, 6, 8
- this last allocation also allocates new block for extents. Then we
writeout block 1 so we have extents 0-2, 4, 6, 8 and we release
indirect extent block because extents fit in the inode again. Then we
writeout block 10 and we need to allocate indirect extent block again
which triggers the warning because we don't have the reservation
anymore.
Fix the problem by giving back freed metadata blocks resulting from
extent merging into inode's reservation pool.
Signed-off-by: Jan Kara <jack@suse.cz>
In no journal mode, if an inode has recently been deleted, we
shouldn't reuse it right away. Otherwise it's possible, after an
unclean shutdown, to hit a situation where a recently deleted inode
gets reused for some other purpose before the inode table block has
been written to disk. However, if the directory entry has been
updated, then the directory entry will be pointing at the old inode
contents.
E2fsck will make sure the file system is consistent after the
unclean shutdown. However, if the recently deleted inode is a
character mode device, or an inode with the immutable bit set, even
after the file system has been fixed up by e2fsck, it can be
possible for a *.pyc file to be pointing at a character mode
device, and when python tries to open the *.pyc file, Hilarity
Ensues. We could change all of userspace to be very suspicious
about stat'ing files before opening them, and clearing the
immutable flag if necessary --- or we can just avoid reusing an
inode number if it has been recently deleted.
Google-Bug-Id: 10017573
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When ext4_rename() overwrites an already existing file, call
ext4_alloc_da_blocks() before starting the journal handle which
actually does the rename, instead of doing this afterwards. This
improves the likelihood that the contents will survive a crash if an
application replaces a file using the sequence:
1) write replacement contents to foo.new
2) <omit fsync of foo.new>
3) rename foo.new to foo
It is still not a guarantee, since ext4_alloc_da_blocks() is *not*
doing a file integrity sync; this means if foo.new is a very large
file, it may not be completely flushed out to disk.
However, for files smaller than a megabyte or so, any dirty pages
should be flushed out before we do the rename operation, and so at the
next journal commit, the CACHE FLUSH command will make sure al of
these pages are safely on the disk platter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_rename(), don't start the journal handle until the the
directory entries have been successfully looked up.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add a new fiemap flag which forces the all of the extents in an inode
to be cached in the extent_status tree. This is critically important
when using AIO to a preallocated file, since if we need to read in
blocks from the extent tree, the io_submit(2) system call becomes
synchronous, and the AIO is no longer "A", which is bad.
In addition, for most files which have an external leaf tree block,
the cost of caching the information in the extent status tree will be
less than caching the entire 4k block in the buffer cache. So it is
generally a win to keep the extent information cached.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we read in an extent tree leaf block from disk, arrange to have
all of its entries cached. In nearly all cases the in-memory
representation will be more compact than the on-disk representation in
the buffer cache, and it allows us to get the information without
having to traverse the extent tree for successive extents.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Don't use an unsigned long long for the es_status flags; this requires
that we pass 64-bit values around which is painful on 32-bit systems.
Instead pass the extent status flags around using the low 4 bits of an
unsigned int, and shift them into place when we are reading or writing
es_pblk.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
When we find an invalid extent tree block, report the block number of
the bad block for debugging purposes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Mel Gorman