This patch moves the multiplexing switch counter from x86 code to
common oprofile statistic variables. Now the value will be available
and usable for all architectures. The initialization and
incrementation also moved to common code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
To setup a counter for all cpus, its structure is cloned from cpu
0. This patch implements mux_clone() to do this part for multiplexing
data.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch checks if the model supports multiplexing. Only then
multiplexing will be enabled. The code is added to the common x86
initialization.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The check is used to prevent running multiplexing code for models not
supporting multiplexing. Before, the code was running but without
effect.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Models that do not yet support counter multiplexing have to setup
num_virt_counters. This patch implements the setup from num_counters
if num_virt_counters is not set. Thus, num_virt_counters must be setup
only for multiplexing support.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch removes the const qualifier from struct
op_x86_model_spec to make model parameters changable.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch implements nmi_setup_mux() and nmi_shutdown_mux() functions
to setup/shutdown multiplexing. Multiplexing code in nmi_int.c is now
much more separated.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch moves some multiplexing code to the new function
op_mux_fill_in_addresses(). Also, the whole multiplexing code is now
at a single location.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Variable switch_index must be initialized for each cpu. This patch
fixes the initialization by moving it to the per-cpu init function
nmi_cpu_setup().
Signed-off-by: Robert Richter <robert.richter@amd.com>
__get_cpu_var() calls smp_processor_id(). When the cpu id is already
known, instead use per_cpu() to avoid generating the id again.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Use the corresponding macros when iterating over counter and control
registers. Since NUM_CONTROLS and NUM_COUNTERS are equal for AMD cpus
the fix is more a cosmetical change.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The number of hardware counters is limited. The multiplexing feature
enables OProfile to gather more events than counters are provided by
the hardware. This is realized by switching between events at an user
specified time interval.
A new file (/dev/oprofile/time_slice) is added for the user to specify
the timer interval in ms. If the number of events to profile is higher
than the number of hardware counters available, the patch will
schedule a work queue that switches the event counter and re-writes
the different sets of values into it. The switching mechanism needs to
be implemented for each architecture to support multiplexing. This
patch only implements AMD CPU support, but multiplexing can be easily
extended for other models and architectures.
There are follow-on patches that rework parts of this patch.
Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch removes the function nmi_save_registers(). Per-cpu code is
now executed only in the function nmi_cpu_setup(). Also, it renames
the per-cpu function nmi_restore_registers() to
nmi_cpu_restore_registers().
Signed-off-by: Robert Richter <robert.richter@amd.com>
When casting the counter value to a 64 bit value in 32 bit mode, sign
extension may lead to broken counter values. This patch fixes this by
casting to (u64) instead of (s64).
Signed-off-by: Robert Richter <robert.richter@amd.com>
The short name of the achitecture is 'arch_perfmon'. This patch
changes the kernel parameter to use this name.
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
op_amd_handle_ibs() should return 0 when IBS is not present or not defined.
Fix compilation warning:
CC [M] arch/x86/oprofile/op_model_amd.o
arch/x86/oprofile/op_model_amd.c: In function ‘op_amd_handle_ibs’:
arch/x86/oprofile/op_model_amd.c:217: warning: no return statement in function returning non-void
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Commit:
e419294 x86/oprofile: moving arch_perfmon counter setup to op_x86_model_spec.init
introduced a bug in the initialization of core_i7 leading to the
incorrect model setup to &op_ppro_spec. This patch fixes this.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The IBS implemention writes 64 bit register values to the cpu buffer
by writing two 32 values using oprofile_add_data(). This patch
introduces oprofile_add_data64() to write a single 64 bit value to the
buffer.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The IBS code internally uses 32 bit values (a low and a high value) to
represent a 64 bit value. This patch changes this and now 64 bit
values are used instead. 64 bit MSR functions can be used now.
No functional changes.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch removes struct op_saved_msr and replaces it by an u64
variable. This makes code easier and it is possible to use 64 bit MSR
functions.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The patch replaces all CTRL_SET_*ACTIVE macros. 64 bit MSR functions
and 64 bit counter values are used now. The code uses bit masks from
<asm/intel_arch_perfmon.h>.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The patch replaces all CTR_OVERFLOWED macros. 64 bit MSR functions and
64 bit counter values are used now. Thus, it will be easier to later
extend the models to use more than 32 bit width counters.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch introduces op_x86_get_ctrl() to calculate the value of the
performance control register. This is generic code usable for all
models. The event and reserved masks are model specific and stored in
struct op_x86_model_spec. 64 bit MSR functions are used now. The patch
removes many hard to read macros used for ctrl calculation.
The function op_x86_get_ctrl() is common code and the first step to
further merge performance counter implementations for x86 models.
Signed-off-by: Robert Richter <robert.richter@amd.com>
In follow-on patches the setup_ctrs() functions will need data that
describes the model. This patch extends the function argument list to
pass a pointer of the model to these function.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The use of the macros has no effect. The oprofilefs has to be extended
first to support these features.
Signed-off-by: Robert Richter <robert.richter@amd.com>
This patch fixes missing braces around macro parameters. Macro
definitions from intel_arch_perfmon.h are used where possible.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
There are duplicate macro implementations in model specific code. This
patch moves all common macros to op_x86_model.h.
Signed-off-by: Robert Richter <robert.richter@amd.com>
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
oprofile: introduce module_param oprofile.cpu_type
oprofile: add support for Core i7 and Atom
oprofile: remove undocumented oprofile.p4force option
oprofile: re-add force_arch_perfmon option
The function arch_perfmon_init() in nmi_int.c is model specific. This
patch moves it to op_model_ppro.c by using the init function pointer
in struct op_x86_model_spec.
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
This reverts commit 59512900ba.
arch_perfmon_setup_counters() is actually never called for ppro, so
there is no code that changes the numbers in op_ppro_spec. The patch
as it is has no effect.
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
based - to pick up the latest upstream fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Robert Richter