In commit 2e12bc29 ("intel-iommu: Default to non-coherent for domains
unattached to iommus") we decided to err on the side of caution and
always assume that it's possible that a device will be attached which is
behind a non-coherent IOMMU.
In some cases, however, that just *cannot* happen. If there *are* no
IOMMUs in the system which are non-coherent, then we don't need to do
it. And flushing the dcache is a *significant* performance hit.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
There is a race condition between the existing clear/free code and the
hardware. The IOMMU is actually permitted to cache the intermediate
levels of the page tables, and doesn't need to walk the table from the
very top of the PGD each time. So the existing back-to-back calls to
dma_pte_clear_range() and dma_pte_free_pagetable() can lead to a
use-after-free where the IOMMU reads from a freed page table.
When freeing page tables we actually need to do the IOTLB flush, with
the 'invalidation hint' bit clear to indicate that it's not just a
leaf-node flush, after unlinking each page table page from the next level
up but before actually freeing it.
So in the rewritten domain_unmap() we just return a list of pages (using
pg->freelist to make a list of them), and then the caller is expected to
do the appropriate IOTLB flush (or tear down the domain completely,
whatever), before finally calling dma_free_pagelist() to free the pages.
As an added bonus, we no longer need to flush the CPU's data cache for
pages which are about to be *removed* from the page table hierarchy anyway,
in the non-cache-coherent case. This drastically improves the performance
of large unmaps.
As a side-effect of all these changes, this also fixes the fact that
intel_iommu_unmap() was neglecting to free the page tables for the range
in question after clearing them.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
We have this horrid API where iommu_unmap() can unmap more than it's asked
to, if the IOVA in question happens to be mapped with a large page.
Instead of propagating this nonsense to the point where we end up returning
the page order from dma_pte_clear_range(), let's just do it once and adjust
the 'size' parameter accordingly.
Augment pfn_to_dma_pte() to return the level at which the PTE was found,
which will also be useful later if we end up changing the API for
iommu_iova_to_phys() to behave the same way as is being discussed upstream.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The iopte_free() function should check for NULL because
kmem_cache_free() will panic on NULL argument.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Now we have a PCI bus notification based mechanism to update DMAR
device scope array, we could extend the mechanism to support boot
time initialization too, which will help to unify and simplify
the implementation.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Current Intel DMAR/IOMMU driver assumes that all PCI devices associated
with DMAR/RMRR/ATSR device scope arrays are created at boot time and
won't change at runtime, so it caches pointers of associated PCI device
object. That assumption may be wrong now due to:
1) introduction of PCI host bridge hotplug
2) PCI device hotplug through sysfs interfaces.
Wang Yijing has tried to solve this issue by caching <bus, dev, func>
tupple instead of the PCI device object pointer, but that's still
unreliable because PCI bus number may change in case of hotplug.
Please refer to http://lkml.org/lkml/2013/11/5/64
Message from Yingjing's mail:
after remove and rescan a pci device
[ 611.857095] dmar: DRHD: handling fault status reg 2
[ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000
[ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.857524] dmar: DRHD: handling fault status reg 102
[ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000
[ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.857936] dmar: DRHD: handling fault status reg 202
[ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000
[ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.858351] dmar: DRHD: handling fault status reg 302
[ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000
[ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear
[ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 611.860983] dmar: DRHD: handling fault status reg 402
[ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4
[ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear
This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope
caches by hooking PCI bus notification.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Global DMA and interrupt remapping resources may be accessed in
interrupt context, so use RCU instead of rwsem to protect them
in such cases.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Introduce a global rwsem dmar_global_lock, which will be used to
protect DMAR related global data structures from DMAR/PCI/memory
device hotplug operations in process context.
DMA and interrupt remapping related data structures are read most,
and only change when memory/PCI/DMAR hotplug event happens.
So a global rwsem solution is adopted for balance between simplicity
and performance.
For interrupt remapping driver, function intel_irq_remapping_supported(),
dmar_table_init(), intel_enable_irq_remapping(), disable_irq_remapping(),
reenable_irq_remapping() and enable_drhd_fault_handling() etc
are called during booting, suspending and resuming with interrupt
disabled, so no need to take the global lock.
For interrupt remapping entry allocation, the locking model is:
down_read(&dmar_global_lock);
/* Find corresponding iommu */
iommu = map_hpet_to_ir(id);
if (iommu)
/*
* Allocate remapping entry and mark entry busy,
* the IOMMU won't be hot-removed until the
* allocated entry has been released.
*/
index = alloc_irte(iommu, irq, 1);
up_read(&dmar_global_lock);
For DMA remmaping driver, we only uses the dmar_global_lock rwsem to
protect functions which are only called in process context. For any
function which may be called in interrupt context, we will use RCU
to protect them in following patches.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Introduce for_each_dev_scope()/for_each_active_dev_scope() to walk
{active} device scope entries. This will help following RCU lock
related patches.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Reduce duplicated code to handle virtual machine domains, there's no
functionality changes. It also improves code readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Enhance function get_domain_for_dev() to release allocated resources
if failed to create domain for PCIe endpoint, otherwise the allocated
resources will get lost.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function get_domain_for_dev() is a little complex, simplify it
by factoring out dmar_search_domain_by_dev_info() and
dmar_insert_dev_info().
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Move private structures and variables into intel-iommu.c, which will
help to simplify locking policy for hotplug. Also delete redundant
declarations.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Factor out function dmar_alloc_dev_scope() from dmar_parse_dev_scope()
for later reuse.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function device_notifier() in intel-iommu.c only remove domain_device_info
data structure associated with a PCI device when handling PCI device
driver unbinding events. If a PCI device has never been bound to a PCI
device driver, there won't be BUS_NOTIFY_UNBOUND_DRIVER event when
hot-removing the PCI device. So associated domain_device_info data
structure may get lost.
On the other hand, if iommu_pass_through is enabled, function
iommu_prepare_static_indentify_mapping() will create domain_device_info
data structure for each PCIe to PCIe bridge and PCIe endpoint,
no matter whether there are drivers associated with those PCIe devices
or not. So those domain_device_info data structures will get lost when
hot-removing the assocated PCIe devices if they have never bound to
any PCI device driver.
To be even worse, it's not only an memory leak issue, but also an
caching of stale information bug because the memory are kept in
device_domain_list and domain->devices lists.
Fix the bug by trying to remove domain_device_info data structure when
handling BUS_NOTIFY_DEL_DEVICE event.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function device_notifier() in intel-iommu.c fails to remove
device_domain_info data structures for PCI devices if they are
associated with si_domain because iommu_no_mapping() returns true
for those PCI devices. This will cause memory leak and caching of
stale information in domain->devices list.
So fix the issue by not calling iommu_no_mapping() and skipping check
of iommu_pass_through.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The OMAP IOMMU driver locates the IOMMU associated to a device using the
IOMMU name stored in the device archdata iommu field. That field is
expected to be populated by platform code and is left unset for DT-based
devices. This results in a crash when the IOMMU driver attaches a domain
to a device.
Fix this by allocating the archdata iommu structure when devices are
added and freeing when they are removed. Devices without an OF node, and
devices without an iommus property in their OF node are ignored. The
iommu name is initialized from the IOMMU device node name.
This should be simplified when removing non-DT support completely from
the IOMMU users as the IOMMU name won't be needed anymore, and the
IOMMU device pointer could then be stored in the archdata iommu field
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[s-anna@ti.com: updated to use device name instead of OF name]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The remoteproc MMUs in OMAP4+ SoCs have some additional debug
registers that can give out the PC value in addition to the
MMU fault address. The PC value can be extracted properly only
on the DSP cores, and is not available on the ARM processors
within the IPU sub-systems. Instead, the MMUs have been enhanced
to throw a bus-error response back to the IPU processors.
This functionality is programmable through the MMU_GP_REG register.
The cores are simply stalled if the MMU_GP_REG.BUS_ERR_BACK_EN bit
is not set. When set, a bus-error exception is raised allowing the
processor to handle it as a bus fault and provide additional debug
information. This feature is turned on by default by the driver on
iommus supporting it.
Signed-off-by: Subramaniam Chanderashekarapuram <subramaniam.ca@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
As OMAP2+ is moving to a full DT boot for all SoC families, commit
7ce93f3 "ARM: OMAP2+: Fix more missing data for omap3.dtsi file"
adds basic DT bits for OMAP3. But the driver is not yet converted,
so this will not work and driver will not be probed. Convert it!
The legacy boot mode is still supported until OMAP3 is converted
to DT-boot only.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
[s-anna@ti.com: dev_name adaptation and improved error checking]
Signed-off-by: Suman Anna <s-anna@ti.com>
[tony@atomide.com: Ack for arch/arm/*omap* parts]
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
When booting with a devicetree, no platform data is provided.
Do not prematurely exit iommu_enable() and iommu_disable() in
such a case.
Note: As OMAP do not yet has a proper reset controller driver,
IOMMUs requiring a reset signal should use pdata-quirks as a
transitional solution.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
There are couple of issues with the error return paths in
omap_iommu_attach():
1. omap_iommu_attach() returns NULL or ERR_PTR in case of error,
but omap_iommu_attach_dev() only checks for IS_ERR. Thus a NULL
return value (in case driver_find_device fails) will cause the
kernel to panic when omap_iommu_attach_dev() dereferences the
pointer.
2. A try_module_get() failure returns a valid success value as
returned from iommu_enable().
Both the above issues have been fixed up to return the proper
ERR_PTR.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use the various devm_ interfaces to simplify the cleanup in
probe and remove functions.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Commit 78a2e12f51 ("iommu: shmobile: Enable driver compilation with
COMPILE_TEST") added an optional dependency on SH_MOBILE. But that
Kconfig symbol doesn't exist. It seems ARCH_SHMOBILE was intended. Use
that.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch corrects the PASID format in the INVALIDATE_IOTLB_PAGES
command, which was caused by incorrect information in
the AMD IOMMU Architectural Specification v2.01 document.
Incorrect format:
cmd->data[0][16:23] = PASID[7:0]
cmd->data[1][16:27] = PASID[19:8]
Correct format:
cmd->data[0][16:23] = PASID[15:8]
cmd->data[1][16:23] = PASID[7:0]
However, this does not affect the IOMMUv2 hardware implementation,
and has been corrected since version 2.02 of the specification
(available through AMD NDA).
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The 'order' parameter for IOMMU-aware dma-mapping implementation was
introduced mainly as a hack to reduce size of the bitmap used for
tracking IO virtual address space. Since now it is possible to dynamically
resize the bitmap, this hack is not needed and can be removed without any
impact on the client devices. This way the parameters for
arm_iommu_create_mapping() becomes much easier to understand. 'size'
parameter now means the maximum supported IO address space size.
The code will allocate (resize) bitmap in chunks, ensuring that a single
chunk is not larger than a single memory page to avoid unreliable
allocations of size larger than PAGE_SIZE in atomic context.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Commit 1463fe44fd ("iommu/arm-smmu: Don't use VMIDs for stage-1
translations") moved our TLB invalidation from context creation time to
context destruction time, but forgot to update an associated comment.
This patch fixes the broken comment.
Signed-off-by: Will Deacon <will.deacon@arm.com>
These should have been octal.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On coherent systems, publishing new page tables to the SMMU walker is
achieved with a dsb instruction. In fact, this can be a dsb(ishst) which
also provides the mandatory barrier option for arm64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 972157cac5 ("arm/smmu: Use irqsafe spinlock for domain lock")
fixed our page table locks to be the irq{save,restore} variants, since
the DMA mapping API can be invoked from interrupt context.
This patch cleans up our use of the flags variable so we can distinguish
between IRQ flags (now `flags') and pte protection bits (now `prot').
Signed-off-by: Will Deacon <will.deacon@arm.com>
In such a case we have to use secure aliases of some non-secure
registers.
This handling is switched on by DT property
"calxeda,smmu-secure-config-access" for an SMMU node.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[will: merged with driver option handling patch]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The DT parsing code that determines stream IDs uses
of_parse_phandle_with_args and thus MAX_MASTER_STREAMIDS
is always bound by MAX_PHANDLE_ARGS.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As the lock might be used through DMA-API which is allowed
in interrupt context.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Will Deacon <will.deacon@arm.com>
We currently include <linux/irqreturn.h> in <linux/pci.h>, but I'm about to
remove that from linux/pci.h, so add explicit includes where needed.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Whilst trying to bring-up an SMMUv2 implementation with the table
walker plumbed into a coherent interconnect, I noticed that the memory
transactions targetting the CPU caches from the SMMU were marked as
outer-shareable instead of inner-shareable.
After a bunch of digging, it seems that we actually need to program
CBARn.BPSHCFG for s1-s2-bypass contexts to act as non-shareable in order
for the shareability configured in the corresponding TTBCR not to be
overridden with an outer-shareable attribute.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that we populate page tables as we traverse them ("iommu/arm-smmu:
fix pud/pmd entry fill sequence"), we need to ensure that we flush out
our zeroed tables after initial allocation, to prevent speculative TLB
fills using bogus data.
This patch adds additional calls to arm_smmu_flush_pgtable during
initial table allocation, and moves the dsb required by coherent table
walkers into the helper.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit a44a9791e7 ("iommu/arm-smmu: use mutex instead of spinlock for
locking page tables") replaced the page table spinlock with a mutex, to
allow blocking allocations to satisfy lazy mapping requests.
Unfortunately, it turns out that IOMMU mappings are created from atomic
context (e.g. spinlock held during a dma_map), so this change doesn't
really help us in practice.
This patch is a partial revert of the offending commit, bringing back
the original spinlock but replacing our page table allocations for any
levels below the pgd (which is allocated during domain init) with
GFP_ATOMIC instead of GFP_KERNEL.
Cc: <stable@vger.kernel.org>
Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU driver's population of puds and pmds is broken, since we
iterate over the next level of table repeatedly setting the current
level descriptor to point at the pmd being initialised. This is clearly
wrong when dealing with multiple pmds/puds.
This patch fixes the problem by moving the pud/pmd population out of the
loop and instead performing it when we allocate the next level (like we
correctly do for ptes already). The starting address for the next level
is then calculated prior to entering the loop.
Cc: <stable@vger.kernel.org>
Signed-off-by: Yifan Zhang <zhangyf@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
A few patches have been queued up for this merge window:
* Improvements for the ARM-SMMU driver
(IOMMU_EXEC support, IOMMU group support)
* Updates and fixes for the shmobile IOMMU driver
* Various fixes to generic IOMMU code and the
Intel IOMMU driver
* Some cleanups in IOMMU drivers (dev_is_pci() usage)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=YKLk
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU Updates from Joerg Roedel:
"A few patches have been queued up for this merge window:
- improvements for the ARM-SMMU driver (IOMMU_EXEC support, IOMMU
group support)
- updates and fixes for the shmobile IOMMU driver
- various fixes to generic IOMMU code and the Intel IOMMU driver
- some cleanups in IOMMU drivers (dev_is_pci() usage)"
* tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (36 commits)
iommu/vt-d: Fix signedness bug in alloc_irte()
iommu/vt-d: free all resources if failed to initialize DMARs
iommu/vt-d, trivial: clean sparse warnings
iommu/vt-d: fix wrong return value of dmar_table_init()
iommu/vt-d: release invalidation queue when destroying IOMMU unit
iommu/vt-d: fix access after free issue in function free_dmar_iommu()
iommu/vt-d: keep shared resources when failed to initialize iommu devices
iommu/vt-d: fix invalid memory access when freeing DMAR irq
iommu/vt-d, trivial: simplify code with existing macros
iommu/vt-d, trivial: use defined macro instead of hardcoding
iommu/vt-d: mark internal functions as static
iommu/vt-d, trivial: clean up unused code
iommu/vt-d, trivial: check suitable flag in function detect_intel_iommu()
iommu/vt-d, trivial: print correct domain id of static identity domain
iommu/vt-d, trivial: refine support of 64bit guest address
iommu/vt-d: fix resource leakage on error recovery path in iommu_init_domains()
iommu/vt-d: fix a race window in allocating domain ID for virtual machines
iommu/vt-d: fix PCI device reference leakage on error recovery path
drm/msm: Fix link error with !MSM_IOMMU
iommu/vt-d: use dedicated bitmap to track remapping entry allocation status
...
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
dma_pte_free_level() has an off-by-one error when checking whether a pte
is completely covered by a range. Take for example the case of
attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first
2M superpage.
The level_size() is 0x200 and we test:
static void dma_pte_free_level(...
...
if (!(0 > 0 || 0x1ff < 0 + 0x200)) {
...
}
Clearly the 2nd test is true, which means we fail to take the branch to
clear and free the pagetable entry. As a result, we're leaking
pagetables and failing to install new pages over the range.
This was found with a PCI device assigned to a QEMU guest using vfio-pci
without a VGA device present. The first 1M of guest address space is
mapped with various combinations of 4K pages, but eventually the range
is entirely freed and replaced with a 2M contiguous mapping.
intel-iommu errors out with something like:
ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083)
In this case 5c2b8003 is the pointer to the previous leaf page that was
neither freed nor cleared and 849c00083 is the superpage entry that
we're trying to replace it with.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
"index" needs to be signed for the error handling to work. I deleted a
little bit of obsolete cruft related to "index" and "start_index" as
well.
Fixes: 360eb3c568 ('iommu/vt-d: use dedicated bitmap to track remapping entry allocation status')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Enhance intel_iommu_init() to free all resources if failed to
initialize DMAR hardware.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Clean up most sparse warnings in Intel DMA and interrupt remapping
drivers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
If dmar_table_init() fails to detect DMAR table on the first call,
it will return wrong result on following calls because it always
sets dmar_table_initialized no matter if succeeds or fails to
detect DMAR table.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Release associated invalidation queue when destroying IOMMU unit
to avoid memory leak.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Simplify vt-d related code with existing macros and introduce a new
macro for_each_active_drhd_unit() to enumerate all active DRHD unit.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use defined macro instead of hardcoding in function set_ioapic_sid()
for readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Functions alloc_iommu() and parse_ioapics_under_ir()
are only used internally, so mark them as static.
[Joerg: Made detect_intel_iommu() non-static again for IA64]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Remove dead code from VT-d related files.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Conflicts:
drivers/iommu/dmar.c
Flag irq_remapping_enabled is only set by intel_enable_irq_remapping(),
which is called after detect_intel_iommu(). So moving pr_info() from
detect_intel_iommu() to intel_enable_irq_remapping(), which also
slightly simplifies implementation.
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Field si_domain->id is set by iommu_attach_domain(), so we should only
print domain id for static identity domain after calling
iommu_attach_domain(si_domain, iommu), otherwise it's always zero.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
In Intel IOMMU driver, it calculate page table level from adjusted guest
address width as 'level = (agaw - 30) / 9', which assumes (agaw -30)
could be divided by 9. On the other hand, 64bit is a valid agaw and
(64 - 30) can't be divided by 9, so it needs special handling.
This patch enhances Intel IOMMU driver to correctly handle 64bit agaw.
It's mainly for code readability because there's no hardware supporting
64bit agaw yet.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Release allocated resources on error recovery path in function
iommu_init_domains().
Also improve printk messages in iommu_init_domains().
Acked-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function intel_iommu_domain_init() may be concurrently called by upper
layer without serialization, so use atomic_t to protect domain id
allocation.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Function dmar_parse_dev_scope() should release the PCI device reference
count gained in function dmar_parse_one_dev_scope() on error recovery,
otherwise it will cause PCI device object leakage.
This patch also introduces dmar_free_dev_scope(), which will be used
to support DMAR device hotplug.
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Currently Intel interrupt remapping drivers uses the "present" flag bit
in remapping entry to track whether an entry is allocated or not.
It works as follow:
1) allocate a remapping entry and set its "present" flag bit to 1
2) compose other fields for the entry
3) update the remapping entry with the composed value
The remapping hardware may access the entry between step 1 and step 3,
which then observers an entry with the "present" flag set but random
values in all other fields.
This patch introduces a dedicated bitmap to track remapping entry
allocation status instead of sharing the "present" flag with hardware,
thus eliminate the race window. It also simplifies the implementation.
Tested-and-reviewed-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The lock is taken in atomic context, replace it with a spinlock.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The archdata attached_list field isn't initialized, leading to random
crashes when accessed. Use kzalloc() to allocate the whole structure and
make sure all fields get initialized properly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Varun Sethi <varun.sethi@freescale.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Fix a warning in of_iommu.c:
drivers/iommu/of_iommu.c:38:5: warning: no previous prototype for 'of_get_dma_window' [-Wmissing-prototypes]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This helps increasing build testing coverage.
The driver doesn't compile on non-ARM platforms due to usage of the ARM
DMA IOMMU API, restrict compilation to ARM.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Mark function eoi_ioapic_pin_remapped() as static in irq_remapping.c
because it is not used outside this file.
This eliminates the following warning in
irq_remapping.c:drivers/iommu/irq_remapping.c:153:6: warning: no
previous prototype for ‘eoi_ioapic_pin_remapped’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Mark functions int get_irte() and ir_dev_scope_init() as static in
intel_irq_remapping.c because they are not used outside this file.
This eliminates the following warnings in intel_irq_remapping.c:
drivers/iommu/intel_irq_remapping.c:49:5: warning: no previous prototype for ‘get_irte’ [-Wmissing-prototypes]
drivers/iommu/intel_irq_remapping.c:810:12: warning: no previous prototype for ‘ir_dev_scope_init’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Mark the functions check_zero_address() and dmar_get_fault_reason() as
static in dmar.c because they are not used outside this file.
This eliminates the following warnings in dmar.c:
drivers/iommu/dmar.c:491:12: warning: no previous prototype for ‘check_zero_address’ [-Wmissing-prototypes]
drivers/iommu/dmar.c:1116:13: warning: no previous prototype for ‘dmar_get_fault_reason’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Previously, all of our mappings were marked as executable, which isn't
usually required. Now that we have the IOMMU_EXEC flag, use that to
determine whether or not a mapping should be marked as executable.
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the introduction of the VA_BITS definition for arm64, make use of
it in the driver, allowing up to 42-bits of VA space when configured
with 64k pages.
Signed-off-by: Will Deacon <will.deacon@arm.com>
IOMMU groups are expected by certain users of the IOMMU API,
e.g. VFIO. Add new devices found by the SMMU driver to an IOMMU
group to satisfy those users.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix to return -ENODEV instead of 0 when context interrupt number
does no match in arm_smmu_device_dt_probe().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When handling mapping requests, we dereference the SMMU domain before
checking that it is NULL. This patch fixes the issue by removing the check
altogether, since we don't actually use the leaf_smmu when creating
mappings.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When creating IO mappings, we lazily allocate our page tables using the
standard, non-atomic allocator functions. This presents us with a
problem, since our page tables are protected with a spinlock.
This patch reworks the smmu_domain lock to use a mutex instead of a
spinlock. iova_to_phys is then reworked so that it only reads the page
tables, and can run in a lockless fashion, leaving the mutex to guard
against concurrent mapping threads.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 7d02c4d64d ("iommu/shmobile: Enable the driver on all ARM
platforms") completely brokenly enabled the shmobile-iommu driver under
COMPILE_TEST.
It's bogus, because it won't compile anywhere else than ARM, since it
tries to include <asm/dma-iommu.h>, which is very much ARM-only.
So remove the bogus COMPILE_TEST dependency, which just causes
allmodconfig to fail on non-ARM platforms.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Simon Horman <horms@verge.net.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This time the updates contain:
* Tracepoints for certain IOMMU-API functions to make
their use easier to debug
* A tracepoint for IOMMU page faults to make it easier
to get them in user space
* Updates and fixes for the new ARM SMMU driver after
the first hardware showed up
* Various other fixes and cleanups in other IOMMU drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=IWTK
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time the updates contain:
- Tracepoints for certain IOMMU-API functions to make their use
easier to debug
- A tracepoint for IOMMU page faults to make it easier to get them in
user space
- Updates and fixes for the new ARM SMMU driver after the first
hardware showed up
- Various other fixes and cleanups in other IOMMU drivers"
* tag 'iommu-updates-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (26 commits)
iommu/shmobile: Enable the driver on all ARM platforms
iommu/tegra-smmu: Staticize tegra_smmu_pm_ops
iommu/tegra-gart: Staticize tegra_gart_pm_ops
iommu/vt-d: Use list_for_each_entry_safe() for dmar_domain->devices traversal
iommu/vt-d: Use for_each_drhd_unit() instead of list_for_each_entry()
iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits
iommu/arm-smmu: Clear global and context bank fault status registers
iommu/arm-smmu: Print context fault information
iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception
iommu/arm-smmu: Refine check for proper size of mapped region
iommu/arm-smmu: Switch to subsys_initcall for driver registration
iommu/arm-smmu: use relaxed accessors where possible
iommu/arm-smmu: replace devm_request_and_ioremap by devm_ioremap_resource
iommu: Remove stack trace from broken irq remapping warning
iommu: Change iommu driver to call io_page_fault trace event
iommu: Add iommu_error class event to iommu trace
iommu/tegra: gart: cleanup devm_* functions usage
iommu/tegra: Print phys_addr_t using %pa
iommu: No need to pass '0x' when '%pa' is used
iommu: Change iommu driver to call unmap trace event
...
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from
Mika Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar,
Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski,
Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki,
Naresh Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani,
Zhang Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko,
Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JCxk
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael J Wysocki:
- New power capping framework and the the Intel Running Average Power
Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.
- Addition of the in-kernel switching feature to the arm_big_little
cpufreq driver from Viresh Kumar and Nicolas Pitre.
- cpufreq support for iMac G5 from Aaro Koskinen.
- Baytrail processors support for intel_pstate from Dirk Brandewie.
- cpufreq support for Midway/ECX-2000 from Mark Langsdorf.
- ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.
- ACPI power management support for the I2C and SPI bus types from Mika
Westerberg and Lv Zheng.
- cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.
- cpufreq drivers updates (mostly fixes and cleanups) from Viresh
Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.
- intel_pstate updates from Dirk Brandewie and Adrian Huang.
- ACPICA update to version 20130927 includig fixes and cleanups and
some reduction of divergences between the ACPICA code in the kernel
and ACPICA upstream in order to improve the automatic ACPICA patch
generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
Bhat, Bjorn Helgaas, David E Box.
- ACPI IPMI driver fixes and cleanups from Lv Zheng.
- ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
Yanfei, Rafael J Wysocki.
- Conversion of the ACPI AC driver to the platform bus type and
multiple driver fixes and cleanups related to ACPI from Zhang Rui.
- ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.
- Fixes and cleanups and new blacklist entries related to the ACPI
video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
Kirill Tkhai.
- cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.
- cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
Bartlomiej Zolnierkiewicz, Prarit Bhargava.
- devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.
- Operation Performance Points (OPP) core updates from Nishanth Menon.
- Runtime power management core fix from Rafael J Wysocki and update
from Ulf Hansson.
- Hibernation fixes from Aaron Lu and Rafael J Wysocki.
- Device suspend/resume lockup detection mechanism from Benoit Goby.
- Removal of unused proc directories created for various ACPI drivers
from Lan Tianyu.
- ACPI LPSS driver fix and new device IDs for the ACPI platform scan
handler from Heikki Krogerus and Jarkko Nikula.
- New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.
- Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
Liu Chuansheng.
- Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
Jean-Christophe Plagniol-Villard.
* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
cpufreq: conservative: fix requested_freq reduction issue
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
ACPI / event: remove unneeded NULL pointer check
Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
ACPI / video: Quirk initial backlight level 0
ACPI / video: Fix initial level validity test
intel_pstate: skip the driver if ACPI has power mgmt option
PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
ACPI / hotplug: Do not execute "insert in progress" _OST
ACPI / hotplug: Carry out PCI root eject directly
ACPI / hotplug: Merge device hot-removal routines
ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
ACPI / hotplug: Simplify device ejection routines
ACPI / hotplug: Fix handle_root_bridge_removal()
ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
ACPI / scan: Start matching drivers after trying scan handlers
ACPI: Remove acpi_pci_slot_init() headers from internal.h
ACPI / blacklist: fix name of ThinkPad Edge E530
PowerCap: Fix build error with option -Werror=format-security
...
Conflicts:
arch/arm/mach-omap2/opp.c
drivers/Kconfig
drivers/spi/spi.c
Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI, and increase build testing coverage with
COMPILE_TEST.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
'tegra_smmu_pm_ops' is used only in this file. Make it static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
'tegra_gart_pm_ops' is local to this file. Make it static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Use for_each_drhd_unit() instead of list_for_each_entry for
better readability.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The BUG_ON in drivers/iommu/intel-iommu.c:785 can be triggered from userspace via
VFIO by calling the VFIO_IOMMU_MAP_DMA ioctl on a vfio device with any address
beyond the addressing capabilities of the IOMMU. The problem is that the ioctl code
calls iommu_iova_to_phys before it calls iommu_map. iommu_map handles the case that
it gets addresses beyond the addressing capabilities of its IOMMU.
intel_iommu_iova_to_phys does not.
This patch fixes iommu_iova_to_phys to return NULL for addresses beyond what the
IOMMU can handle. This in turn causes the ioctl call to fail in iommu_map and
(correctly) return EFAULT to the user with a helpful warning message in the kernel
log.
Signed-off-by: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch updates DMAR table header definitions as such enhancement
has been made in ACPICA upstream already. It ports that change to
the Linux source to reduce source code differences between Linux and
ACPICA upstream.
Build test done on x86-64 machine with the following configs enabled:
CONFIG_DMAR_TABLE
CONFIG_IRQ_REMAP
CONFIG_INTEL_IOMMU
This patch does not affect the generation of the Linux kernel binary.
[rjw: Changelog]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
David Woodhouse