Commit Graph

34 Commits

Author SHA1 Message Date
Catalin Marinas addd72c1a9 kmemleak: Improve the "Early log buffer exceeded" error message
Based on a suggestion from Jaswinder, clarify what the user would need
to do to avoid this error message from kmemleak.

Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-11 10:42:09 +01:00
Luis R. Rodriguez 7eb0d5e5be kmemleak: fix sparse warning for static declarations
This fixes these sparse warnings:

mm/kmemleak.c:1179:6: warning: symbol 'start_scan_thread' was not declared. Should it be static?
mm/kmemleak.c:1194:6: warning: symbol 'stop_scan_thread' was not declared. Should it be static?

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-08 17:34:07 +01:00
Luis R. Rodriguez 0580a1819c kmemleak: fix sparse warning over overshadowed flags
A secondary irq_save is not required as a locking before it was
already disabling irqs.

This fixes this sparse warning:
mm/kmemleak.c:512:31: warning: symbol 'flags' shadows an earlier one
mm/kmemleak.c:448:23: originally declared here

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-08 17:34:06 +01:00
Luis R. Rodriguez a1084c8779 kmemleak: move common painting code together
When painting grey or black we do the same thing, bring
this together into a helper and identify coloring grey or
black explicitly with defines. This makes this a little
easier to read.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-08 17:22:20 +01:00
Luis R. Rodriguez 30b3710105 kmemleak: add clear command support
In an ideal world your kmemleak output will be small, when its
not (usually during initial bootup) you can use the clear command
to ingore previously reported and unreferenced kmemleak objects. We
do this by painting all currently reported unreferenced objects grey.
We paint them grey instead of black to allow future scans on the same
objects as such objects could still potentially reference newly
allocated objects in the future.

To test a critical section on demand with a clean
/sys/kernel/debug/kmemleak you can do:

echo clear > /sys/kernel/debug/kmemleak
        test your kernel or modules
echo scan > /sys/kernel/debug/kmemleak

Then as usual to get your report with:

cat /sys/kernel/debug/kmemleak

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-08 16:36:08 +01:00
Luis R. Rodriguez 4a558dd6f9 kmemleak: use bool for true/false questions
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-08 16:34:50 +01:00
Catalin Marinas 179a8100e1 kmemleak: Do no create the clean-up thread during kmemleak_disable()
The kmemleak_disable() function could be called from various contexts
including IRQ. It creates a clean-up thread but the kthread_create()
function has restrictions on which contexts it can be called from,
mainly because of the kthread_create_lock. The patch changes the
kmemleak clean-up thread to a workqueue.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Eric Paris <eparis@redhat.com>
2009-09-08 16:31:15 +01:00
Catalin Marinas 43ed5d6ee0 kmemleak: Scan all thread stacks
This patch changes the for_each_process() loop with the
do_each_thread()/while_each_thread() pair.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-09-04 16:05:55 +01:00
Pekka Enberg 8e019366ba kmemleak: Don't scan uninitialized memory when kmemcheck is enabled
Ingo Molnar reported the following kmemcheck warning when running both
kmemleak and kmemcheck enabled:

  PM: Adding info for No Bus:vcsa7
  WARNING: kmemcheck: Caught 32-bit read from uninitialized memory
  (f6f6e1a4)
  d873f9f600000000c42ae4c1005c87f70000000070665f666978656400000000
   i i i i u u u u i i i i i i i i i i i i i i i i i i i i i u u u
           ^

  Pid: 3091, comm: kmemleak Not tainted (2.6.31-rc7-tip ) P4DC6
  EIP: 0060:[<c110301f>] EFLAGS: 00010006 CPU: 0
  EIP is at scan_block+0x3f/0xe0
  EAX: f40bd700 EBX: f40bd780 ECX: f16b46c0 EDX: 00000001
  ESI: f6f6e1a4 EDI: 00000000 EBP: f10f3f4c ESP: c2605fcc
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 8005003b CR2: e89a4844 CR3: 30ff1000 CR4: 000006f0
  DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
  DR6: ffff4ff0 DR7: 00000400
   [<c110313c>] scan_object+0x7c/0xf0
   [<c1103389>] kmemleak_scan+0x1d9/0x400
   [<c1103a3c>] kmemleak_scan_thread+0x4c/0xb0
   [<c10819d4>] kthread+0x74/0x80
   [<c10257db>] kernel_thread_helper+0x7/0x3c
   [<ffffffff>] 0xffffffff
  kmemleak: 515 new suspected memory leaks (see
  /sys/kernel/debug/kmemleak)
  kmemleak: 42 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The problem here is that kmemleak will scan partially initialized
objects that makes kmemcheck complain. Fix that up by skipping
uninitialized memory regions when kmemcheck is enabled.

Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-09-04 16:05:55 +01:00
Sergey Senozhatsky 0494e08281 kmemleak: Printing of the objects hex dump
Introducing printing of the objects hex dump to the seq file.
The number of lines to be printed is limited to HEX_MAX_LINES
to prevent seq file spamming. The actual number of printed
bytes is less than or equal to (HEX_MAX_LINES * HEX_ROW_SIZE).

(slight adjustments by Catalin Marinas)

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-08-27 14:29:18 +01:00
Catalin Marinas fd6789675e kmemleak: Save the stack trace for early allocations
Before slab is initialised, kmemleak save the allocations in an early
log buffer. They are later recorded as normal memory allocations. This
patch adds the stack trace saving to the early log buffer, otherwise the
information shown for such objects only refers to the kmemleak_init()
function.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-08-27 14:29:17 +01:00
Catalin Marinas a6186d89c9 kmemleak: Mark the early log buffer as __initdata
This buffer isn't needed after kmemleak was initialised so it can be
freed together with the .init.data section. This patch also marks
functions conditionally accessing the early log variables with __ref.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-08-27 14:29:16 +01:00
Catalin Marinas 189d84ed54 kmemleak: Dump object information on request
By writing dump=<addr> to the kmemleak file, kmemleak will look up an
object with that address and dump the information it has about it to
syslog. This is useful in debugging memory leaks.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-08-27 14:29:15 +01:00
Catalin Marinas af98603dad kmemleak: Allow rescheduling during an object scanning
If the object size is bigger than a predefined value (4K in this case),
release the object lock during scanning and call cond_resched().
Re-acquire the lock after rescheduling and test whether the object is
still valid.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-08-27 14:29:12 +01:00
Catalin Marinas f5886c7f96 kmemleak: Protect the seq start/next/stop sequence by rcu_read_lock()
Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 12:34:58 -07:00
Catalin Marinas 53238a60dd kmemleak: Allow partial freeing of memory blocks
Functions like free_bootmem() are allowed to free only part of a memory
block. This patch adds support for this via the kmemleak_free_part()
callback which removes the original object and creates one or two
additional objects as a result of the memory block split.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-07-08 14:25:14 +01:00
Catalin Marinas 2587362eaf kmemleak: Scan objects allocated during a scanning episode
Many of the false positives in kmemleak happen on busy systems where
objects are allocated during a kmemleak scanning episode. These objects
aren't scanned by default until the next memory scan. When such object
is added, for example, at the head of a list, it is possible that all
the other objects in the list become unreferenced until the next scan.

This patch adds checking for newly allocated objects at the end of the
scan and repeats the scanning on these objects. If Linux allocates
new objects at a higher rate than their scanning, it stops after a
predefined number of passes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:13 +01:00
Catalin Marinas b87324d082 kmemleak: Do not acquire scan_mutex in kmemleak_open()
Initially, the scan_mutex was acquired in kmemleak_open() and released
in kmemleak_release() (corresponding to /sys/kernel/debug/kmemleak
operations). This was causing some lockdep reports when the file was
closed from a different task than the one opening it. This patch moves
the scan_mutex acquiring in kmemleak_write() or kmemleak_seq_start()
with releasing in kmemleak_seq_stop().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:13 +01:00
Catalin Marinas 288c857d66 kmemleak: Remove the reported leaks number limitation
Since the leaks are no longer printed to the syslog, there is no point
in keeping this limitation. All the suspected leaks are shown on
/sys/kernel/debug/kmemleak file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-08 14:25:12 +01:00
Catalin Marinas 4b8a96744c kmemleak: Add more cond_resched() calls in the scanning thread
Following recent fix to no longer reschedule in the scan_block()
function, the system may become unresponsive with !PREEMPT. This patch
re-adds the cond_resched() call to scan_block() but conditioned by the
allow_resched parameter.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-07 10:32:56 +01:00
Catalin Marinas bf2a76b317 kmemleak: Renice the scanning thread to +10
This is a long-running thread but not high-priority. So it makes sense
to renice it to +10.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-07 10:32:55 +01:00
Ingo Molnar 57d81f6f39 kmemleak: Fix scheduling-while-atomic bug
One of the kmemleak changes caused the following
scheduling-while-holding-the-tasklist-lock regression on x86:

BUG: sleeping function called from invalid context at mm/kmemleak.c:795
in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak
2 locks held by kmemleak/1737:
 :  (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86
 :  (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c
Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip 
Call Trace:
 [<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20
 [<c102e490>] __might_sleep+0x10a/0x111
 [<c10c38d5>] scan_yield+0x17/0x3b
 [<c10c3970>] scan_block+0x39/0xd4
 [<c10c3bc6>] kmemleak_scan+0x1bb/0x39c
 [<c10c4331>] ? kmemleak_scan_thread+0x0/0x86
 [<c10c437b>] kmemleak_scan_thread+0x4a/0x86
 [<c104d73e>] kthread+0x6e/0x73
 [<c104d6d0>] ? kthread+0x0/0x73
 [<c100959f>] kernel_thread_helper+0x7/0x10
kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The bit causing it is highly dubious:

static void scan_yield(void)
{
        might_sleep();

        if (time_is_before_eq_jiffies(next_scan_yield)) {
                schedule();
                next_scan_yield = jiffies + jiffies_scan_yield;
        }
}

It called deep inside the codepath and in a conditional way,
and that is what crapped up when one of the new scan_block()
uses grew a tasklist_lock dependency.

This minimal patch removes that yielding stuff and adds the
proper cond_resched().

The background scanning thread could probably also be reniced
to +10.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01 10:26:23 -07:00
Catalin Marinas b6e687221e kmemleak: Do not warn if an unknown object is freed
vmap'ed memory blocks are not tracked by kmemleak (yet) but they may be
released with vfree() which is tracked. The corresponding kmemleak
warning is only enabled in debug mode. Future patch will add support for
ioremap and vmap.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-29 17:14:14 +01:00
Catalin Marinas 17bb9e0d90 kmemleak: Do not report new leaked objects if the scanning was stopped
If the scanning was stopped with a signal, it is possible that some
objects are left with a white colour (potential leaks) and reported. Add
a check to avoid reporting such objects.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-29 17:14:13 +01:00
Catalin Marinas acf4968ec9 kmemleak: Slightly change the policy on newly allocated objects
Newly allocated objects are more likely to be reported as false
positives. Kmemleak ignores the reporting of objects younger than 5
seconds. However, this age was calculated after the memory scanning
completed which usually takes longer than 5 seconds. This patch
make the minimum object age calculation in relation to the start of the
memory scanning.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:29 +01:00
Catalin Marinas 4698c1f2bb kmemleak: Do not trigger a scan when reading the debug/kmemleak file
Since there is a kernel thread for automatically scanning the memory, it
makes sense for the debug/kmemleak file to only show its findings. This
patch also adds support for "echo scan > debug/kmemleak" to trigger an
intermediate memory scan and eliminates the kmemleak_mutex (scan_mutex
covers all the cases now).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:27 +01:00
Catalin Marinas bab4a34afc kmemleak: Simplify the reports logged by the scanning thread
Because of false positives, the memory scanning thread may print too
much information. This patch changes the scanning thread to only print
the number of newly suspected leaks. Further information can be read
from the /sys/kernel/debug/kmemleak file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:26 +01:00
Catalin Marinas e0a2a1601b kmemleak: Enable task stacks scanning by default
This is to reduce the number of false positives reported.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-26 17:38:25 +01:00
Catalin Marinas a9d9058aba kmemleak: Allow the early log buffer to be configurable.
(feature suggested by Sergey Senozhatsky)

Kmemleak needs to track all the memory allocations but some of these
happen before kmemleak is initialised. These are stored in an internal
buffer which may be exceeded in some kernel configurations. This patch
adds a configuration option with a default value of 400 and also removes
the stack dump when the early log buffer is exceeded.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
2009-06-25 10:16:13 +01:00
Joe Perches ae281064be kmemleak: use pr_fmt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-23 14:40:26 +01:00
Catalin Marinas 2030117d27 kmemleak: Fix some typos in comments
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-17 18:29:04 +01:00
Catalin Marinas 000814f44e kmemleak: Rename kmemleak_panic to kmemleak_stop
This is to avoid the confusion created by the "panic" word.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-17 18:29:03 +01:00
Catalin Marinas 216c04b0d8 kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations
Kmemleak allocates memory for pointer tracking and it tries to avoid
using GFP_ATOMIC if the caller doesn't require it. However other gfp
flags may be passed by the caller which aren't required by kmemleak.
This patch filters the gfp flags so that only GFP_KERNEL | GFP_ATOMIC
are used.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-17 18:29:02 +01:00
Catalin Marinas 3c7b4e6b8b kmemleak: Add the base support
This patch adds the base support for the kernel memory leak
detector. It traces the memory allocation/freeing in a way similar to
the Boehm's conservative garbage collector, the difference being that
the unreferenced objects are not freed but only shown in
/sys/kernel/debug/kmemleak. Enabling this feature introduces an
overhead to memory allocations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2009-06-11 17:03:28 +01:00