Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The switchtec_ntb driver has a couple requirements on the switchec's
hardware configuration so we add these notes to the documentation.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The Switchtec hardware has two types of memory windows: LUTs and Direct.
The first area in each BAR is for LUT windows and the remaining area is
for the direct region. The total number of LUT entries is set by a
configuration setting in hardware and they all must be the same
size. (This is fixed by switchtec_ntb to be 64K.)
switchtec_ntb enables the LUTs only for the first BAR and enables the
highest power of two possible. Seeing the LUTs are at the beginning of
the BAR, the direct memory window's alignment is affected. Therefore,
the maximum direct memory window size can not be greater than the number
of LUTs times 64K. The direct window in other BARs will not have this
restriction as the LUTs will not be enabled there. LUTs will only be
exposed through the NTB API if the use_lut_mw parameter is set.
Seeing the Switchtec hardware, by default, configures BARs to be 4G a
module parameter is given to limit the size of the advertised memory
windows. Higher layers tend to allocate the maximum BAR size and this
has a tendency to fail when they try to allocate 4GB of contiguous
memory.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Seeing there is no dedicated hardware for this, we simply add
these as entries in the shared memory window. Thus, we could support
any number of them but 128 seems like enough, for now.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Pretty straightforward implementation of doorbell registers.
The shift and mask were setup in an earlier patch and this just hooks
up the appropriate portion of the IDB register as the local doorbells
and the opposite portion of ODB as the peer doorbells. The DB mask is
protected by a spinlock to avoid concurrent read-modify-write accesses.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
switchtec_ntb checks for a link by looking at the shared memory
window. If the magic number is correct and the other side indicates
their link is enabled then we take the link to be up.
Whenever we change our local link status we send a msg to the
other side to check whether it's up and change their status.
The current status is maintained in a flag so ntb_is_link_up
can return quickly.
We utilize Switchtec's link status notifier to also check link changes
when the switch notices a port changes state.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Add a skeleton NTB driver which will be filled out in subsequent patches.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Set up some hardware registers and creates interrupt service routines
for the doorbells and messages.
There are 64 doorbells in the switch that are shared between all
partitions. The upper 4 doorbells are also shared with the messages
and are therefore not used. Thus, this provides 28 doorbells for each
partition.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Add the code to initialize the memory windows in the hardware.
This includes setting up the requester ID table, and figuring out
which BAR corresponds to which memory window. (Seeing the switch
can be configured with any number of BARs.)
Also, seeing the device doesn't have hardware for scratchpads or
determining the link status, we create a shared memory window that has
these features. A magic number with a version component will be used
to determine if the other side's driver is actually up.
The shared memory window also informs the other side of the
size and count of the local memory windows.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Seeing the Switchtec NTB hardware shares the same endpoint as the
management endpoint we utilize the class_interface API to register
an NTB driver for every Switchtec device in the system that has the
NTB class code.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Adds a comment and a check to ntb_mw_get_align() so that it always fails
if the function is called before the link is up.
Also adds a comment to ntb_mw_count() to note that it may return 0 if
it is called before the link is up.
This is to prevent accidental mis-use in clients that are testing
on hardware that this doesn't matter for.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
With Switchtec hardware it's impossible to get the alignment parameters
for a peer's memory window until the peer's driver has configured its
windows. Strictly speaking, the link doesn't have to be up for this,
but the link being up is the only way the client can tell that
the other side has been configured.
This patch converts ntb_transport and ntb_perf to use this function after
the link goes up. This simplifies these clients slightly because they
no longer have to store the alignment parameters. It also tweaks
ntb_tool so that peer_mw_trans will print zero if it is run before
the link goes up.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In order for the Switchtec NTB code to handle link change events we
create a notifier callback in the switchtec code which gets called
whenever an appropriate event interrupt occurs.
In order to preserve userspace's ability to follow these events,
we compare the event count with a stored copy from last time we
checked.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
There are two additional regions: ctrl and dbmsg. The first is
for generic NTB control and memory windows. The second is for doorbells
and message registers. This patch also adds a number of related
constants for using these registers.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
We export the class pointer symbol and add an extern define in the
Switchtec header file.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Create the switchtec.h header in include/linux with hardware defines
and the switchtec_dev structure. Both moved directly from switchtec.c.
This is a prep patch for creating an NTB driver for Switchtec.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The updates this merge window added several bogus default enablement for
new features. We don't do that. If people want new behavior, they ask
for it.
One 'default n' was also removed as pointless. That's great, but there
were eight other ones in the same file that were left alone.
Fix it up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix a number of races in the NFSv4+ state code.
- fix some shutdown crashes in multiple-network-namespace cases.
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading.
-----BEGIN PGP SIGNATURE-----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=PBs+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Lots of good bugfixes, including:
- fix a number of races in the NFSv4+ state code
- fix some shutdown crashes in multiple-network-namespace cases
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading"
* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
SUNRPC: Improve ordering of transport processing
nfsd: deal with revoked delegations appropriately
svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
nfsd: use nfs->ns.inum as net ID
rpc: remove some BUG()s
svcrdma: Preserve CB send buffer across retransmits
nfds: avoid gettimeofday for nfssvc_boot time
fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
lockd: double unregister of inetaddr notifiers
nfsd4: catch some false session retries
nfsd4: fix cached replies to solo SEQUENCE compounds
sunrcp: make function _svc_create_xprt static
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
nfsd: use ARRAY_SIZE
nfsd: give out fewer session slots as limit approaches
nfsd: increase DRC cache limit
nfsd: remove unnecessary nofilehandle checks
nfs_common: convert int to bool
...
For this cycle we have quite an update for the Dell SMBIOS driver
including WMI work to provide an interface for SMBIOS tokens via sysfs
and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
split into a separate driver followed by a new WMI dispatcher.
The latter provides a character device interface to user space.
The pull request contains a merge of immutable branch from Wolfram Sang
in order to apply a dependent fix to the Intel CherryTrail Battery
Management driver.
Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
support is added for Intel Skylake.
Peaq WMI hotkeys driver gets its own maintainer and white list of
supported models.
Silead DMI is expanded to support few additional platforms.
Tablet mode via GMMS ACPI method is added to support some ThinkPad
tablets.
Two commits appear here which were previously merged during the
v4.14-rcX cycle:
- d7ca5ebf24 platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe function
- e3075fd6f8 platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates
Add driver to force WMI Thunderbolt controller power status:
- Add driver to force WMI Thunderbolt controller power status
asus-wmi:
- Add lightbar led support
dell-laptop:
- Allocate buffer before rfkill use
dell-smbios:
- fix string overflow
- Add filtering support
- Introduce dispatcher for SMM calls
- Add a sysfs interface for SMBIOS tokens
- only run if proper oem string is detected
- Prefix class/select with cmd_
- Add pr_fmt definition to driver
dell-smbios-smm:
- test for WSMT
dell-smbios-wmi:
- release mutex lock on WMI call failure
- introduce userspace interface
- Add new WMI dispatcher driver
dell-smo8800:
- remove redundant assignments to byte_data
dell-wmi:
- don't check length returned
- clean up wmi descriptor check
- increase severity of some failures
- Do not match on descriptor GUID modalias
- Label driver as handling notifications
dell-*wmi*:
- Relay failed initial probe to dependent drivers
dell-wmi-descriptor:
- check if memory was allocated
- split WMI descriptor into it's own driver
fujitsu-laptop:
- Fix radio LED detection
- Don't oops when FUJ02E3 is not presnt
hp_accel:
- Add quirk for HP ProBook 440 G4
hp-wmi:
- Fix tablet mode detection for convertibles
ideapad-laptop:
- Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list
intel_cht_int33fe:
- Update fusb302 type string, add properties
- make a couple of local functions static
- Work around BIOS bug on some devices
intel-hid:
- Power button suspend on Dell Latitude 7275
intel_ips:
- Convert timers to use timer_setup()
- Remove FSF address from GPL notice
- Remove unneeded fields and label
- Keep pointer to struct device
- Use PCI_VDEVICE() macro
- Switch to new PCI IRQ allocation API
- Simplify error handling via devres API
intel_pmc_ipc:
- Revert Use MFD framework to create dependent devices
- Use MFD framework to create dependent devices
- Use spin_lock to protect GCR updates
- Use devm_* calls in driver probe function
intel_punit_ipc:
- Fix resource ioremap warning
intel_telemetry:
- Remove useless default in Kconfig
- Add needed inclusion
- cleanup redundant headers
- Fix typos
- Fix load failure info
intel_telemetry_debugfs:
- Use standard ARRAY_SIZE() macro
intel_turbo_max_3:
- Add Skylake platform
intel-wmi-thunderbolt:
- Silence error cases
MAINTAINERS:
- Add entry for the PEAQ WMI hotkeys driver
mlx-platform:
- make a couple of structures static
peaq_wmi:
- Fix missing terminating entry for peaq_dmi_table
peaq-wmi:
- Remove unnecessary checks from peaq_wmi_exit
- Add DMI check before binding to the WMI interface
- Revert Blacklist Lenovo ideapad 700-15ISK
- Blacklist Lenovo ideapad 700-15ISK
silead_dmi:
- Add silead, home-button property to some tablets
- Add entry for the Digma e200 tablet
- Fix GP-electronic T701 entry
- Add entry for the Chuwi Hi8 Pro tablet
sony-laptop:
- Drop variable assignment in sony_nc_setup_rfkill()
- Fix error handling in sony_nc_setup_rfkill()
thinkpad_acpi:
- Implement tablet mode using GMMS method
tools/wmi:
- add a sample for dell smbios communication over WMI
wmi:
- release mutex on module acquistion failure
- create userspace interface for drivers
- Don't allow drivers to get each other's GUIDs
- Add new method wmidev_evaluate_method
- Destroy on cleanup rather than unregister
- Cleanup exit routine in reverse order of init
- Sort include list
-----BEGIN PGP SIGNATURE-----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=upqs
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
"Here is the collected material against Platform Drivers x86 subsystem.
It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver
activity
For this cycle we have quite an update for the Dell SMBIOS driver
including WMI work to provide an interface for SMBIOS tokens via sysfs
and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
split into a separate driver followed by a new WMI dispatcher. The
latter provides a character device interface to user space.
The git history also contains a merge of immutable branch from Wolfram
Sang in order to apply a dependent fix to the Intel CherryTrail
Battery Management driver.
Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
support is added for Intel Skylake.
Peaq WMI hotkeys driver gets its own maintainer and white list of
supported models.
Silead DMI is expanded to support few additional platforms.
Tablet mode via GMMS ACPI method is added to support some ThinkPad
tablets.
new driver:
- Add driver to force WMI Thunderbolt controller power status
asus-wmi:
- Add lightbar led support
dell-laptop:
- Allocate buffer before rfkill use
dell-smbios:
- fix string overflow
- Add filtering support
- Introduce dispatcher for SMM calls
- Add a sysfs interface for SMBIOS tokens
- only run if proper oem string is detected
- Prefix class/select with cmd_
- Add pr_fmt definition to driver
dell-smbios-smm:
- test for WSMT
dell-smbios-wmi:
- release mutex lock on WMI call failure
- introduce userspace interface
- Add new WMI dispatcher driver
dell-smo8800:
- remove redundant assignments to byte_data
dell-wmi:
- don't check length returned
- clean up wmi descriptor check
- increase severity of some failures
- Do not match on descriptor GUID modalias
- Label driver as handling notifications
dell-*wmi*:
- Relay failed initial probe to dependent drivers
dell-wmi-descriptor:
- check if memory was allocated
- split WMI descriptor into it's own driver
fujitsu-laptop:
- Fix radio LED detection
- Don't oops when FUJ02E3 is not presnt
hp_accel:
- Add quirk for HP ProBook 440 G4
hp-wmi:
- Fix tablet mode detection for convertibles
ideapad-laptop:
- Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list
intel_cht_int33fe:
- Update fusb302 type string, add properties
- make a couple of local functions static
- Work around BIOS bug on some devices
intel-hid:
- Power button suspend on Dell Latitude 7275
intel_ips:
- Convert timers to use timer_setup()
- Remove FSF address from GPL notice
- Remove unneeded fields and label
- Keep pointer to struct device
- Use PCI_VDEVICE() macro
- Switch to new PCI IRQ allocation API
- Simplify error handling via devres API
intel_pmc_ipc:
- Revert Use MFD framework to create dependent devices
- Use MFD framework to create dependent devices
- Use spin_lock to protect GCR updates
- Use devm_* calls in driver probe function
intel_punit_ipc:
- Fix resource ioremap warning
intel_telemetry:
- Remove useless default in Kconfig
- Add needed inclusion
- cleanup redundant headers
- Fix typos
- Fix load failure info
intel_telemetry_debugfs:
- Use standard ARRAY_SIZE() macro
intel_turbo_max_3:
- Add Skylake platform
intel-wmi-thunderbolt:
- Silence error cases
mlx-platform:
- make a couple of structures static
peaq_wmi:
- Fix missing terminating entry for peaq_dmi_table
peaq-wmi:
- Remove unnecessary checks from peaq_wmi_exit
- Add DMI check before binding to the WMI interface
- Revert Blacklist Lenovo ideapad 700-15ISK
- Blacklist Lenovo ideapad 700-15ISK
silead_dmi:
- Add silead, home-button property to some tablets
- Add entry for the Digma e200 tablet
- Fix GP-electronic T701 entry
- Add entry for the Chuwi Hi8 Pro tablet
sony-laptop:
- Drop variable assignment in sony_nc_setup_rfkill()
- Fix error handling in sony_nc_setup_rfkill()
thinkpad_acpi:
- Implement tablet mode using GMMS method
tools/wmi:
- add a sample for dell smbios communication over WMI
wmi:
- release mutex on module acquistion failure
- create userspace interface for drivers
- Don't allow drivers to get each other's GUIDs
- Add new method wmidev_evaluate_method
- Destroy on cleanup rather than unregister
- Cleanup exit routine in reverse order of init
- Sort include list"
* tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
platform/x86: silead_dmi: Add silead, home-button property to some tablets
platform/x86: dell-laptop: Allocate buffer before rfkill use
platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
platform/x86: dell-wmi-descriptor: check if memory was allocated
platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
platform/x86: wmi: release mutex on module acquistion failure
platform/x86: dell-smbios: fix string overflow
platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
platform/x86: intel_punit_ipc: Fix resource ioremap warning
platform/x86: dell-smo8800: remove redundant assignments to byte_data
platform/x86: hp-wmi: Fix tablet mode detection for convertibles
platform/x86: intel_ips: Convert timers to use timer_setup()
platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
tools/wmi: add a sample for dell smbios communication over WMI
platform/x86: dell-smbios-wmi: introduce userspace interface
platform/x86: wmi: create userspace interface for drivers
platform/x86: dell-smbios: Add filtering support
platform/x86: dell-smbios-smm: test for WSMT
...
Add "silead,home-button" property to entries for tablets which have
a capacitive home button (typically a windows logo on the front).
This new property is checked for by the new capacitive home button
support in the silead touchscreen driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull sparc updates from David Miller:
1) Add missing cmpxchg64() for 32-bit sparc.
2) Timer conversions from Allen Pais and Kees Cook.
3) vDSO support, from Nagarathnam Muthusamy.
4) Fix sparc64 huge page table walks based upon bug report by Al Viro,
from Nitin Gupta.
5) Optimized fls() for T4 and above, from Vijay Kumar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix page table walk for PUD hugepages
sparc64: Convert timers to user timer_setup()
sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t
sparc/led: Convert timers to use timer_setup()
sparc64: Use sparc optimized fls and __fls for T4 and above
sparc64: SPARC optimized __fls function
sparc64: SPARC optimized fls function
sparc64: Define SPARC default __fls function
sparc64: Define SPARC default fls function
vDSO for sparc
sparc32: Add cmpxchg64().
sbus: char: Move D7S_MINOR to include/linux/miscdevice.h
sparc: time: Remove unneeded linux/miscdevice.h include
sparc64: mmu_context: Add missing include files
Pull networking fixes from David Miller:
1) Revert regression inducing change to the IPSEC template resolver,
from Steffen Klassert.
2) Peeloffs can cause the wrong sk to be waken up in SCTP, fix from Xin
Long.
3) Min packet MTU size is wrong in cpsw driver, from Grygorii Strashko.
4) Fix build failure in netfilter ctnetlink, from Arnd Bergmann.
5) ISDN hisax driver checks pnp_irq() for errors incorrectly, from
Arvind Yadav.
6) Fix fealnx driver build failure on MIPS, from Huacai Chen.
7) Fix into leak in SCTP, the scope_id of socket addresses is not
always filled in. From Eric W. Biederman.
8) MTU inheritance between physical function and representor fix in nfp
driver, from Dirk van der Merwe.
9) Fix memory leak in rsi driver, from Colin Ian King.
10) Fix expiration and generation ID handling of cached ipv4 redirect
routes, from Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
net: usb: hso.c: remove unneeded DRIVER_LICENSE #define
ibmvnic: fix dma_mapping_error call
ipvlan: NULL pointer dereference panic in ipvlan_port_destroy
route: also update fnhe_genid when updating a route cache
route: update fnhe_expires for redirect when the fnhe exists
sctp: set frag_point in sctp_setsockopt_maxseg correctly
rsi: fix memory leak on buf and usb_reg_buf
net/netlabel: Add list_next_rcu() in rcu_dereference().
nfp: remove false positive offloads in flower vxlan
nfp: register flower reprs for egress dev offload
nfp: inherit the max_mtu from the PF netdev
nfp: fix vlan receive MAC statistics typo
nfp: fix flower offload metadata flag usage
virto_net: remove empty file 'virtio_net.'
net/sctp: Always set scope_id in sctp_inet6_skb_msgname
fealnx: Fix building error on MIPS
isdn: hisax: Fix pnp_irq's error checking for setup_teles3
isdn: hisax: Fix pnp_irq's error checking for setup_sedlbauer_isapnp
isdn: hisax: Fix pnp_irq's error checking for setup_niccy
isdn: hisax: Fix pnp_irq's error checking for setup_ix1micro
...
This changes the HWSPINLOCK core Kconfig option to bool, to aid when other core
code depends on it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kER6
-----END PGP SIGNATURE-----
Merge tag 'hwlock-v4.15' of git://github.com/andersson/remoteproc
Pull hwspinlock update from Bjorn Andersson:
"This changes the HWSPINLOCK core Kconfig option to bool, to aid when
other core code depends on it"
* tag 'hwlock-v4.15' of git://github.com/andersson/remoteproc:
hwspinlock: Change hwspinlock to a bool
This adds an interface for configuring Qualcomm's "secure SMMU" and adds
support for booting the modem Hexagon on MSM8996.
Two new debugfs entries are added in the remoteproc core to introspect the list
of memory carveouts and the loaded resource table.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lnNj
-----END PGP SIGNATURE-----
Merge tag 'rproc-v4.15' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds an interface for configuring Qualcomm's "secure SMMU" and
adds support for booting the modem Hexagon on MSM8996.
Two new debugfs entries are added in the remoteproc core to introspect
the list of memory carveouts and the loaded resource table"
* tag 'rproc-v4.15' of git://github.com/andersson/remoteproc:
remoteproc: qcom: Fix error handling paths in order to avoid memory leaks
remoteproc: qcom: Drop pr_err in q6v5_xfer_mem_ownership()
remoteproc: debug: add carveouts list dump feature
remoteproc: debug: add resource table dump feature
remoteproc: qcom: Add support for mss remoteproc on msm8996
remoteproc: qcom: Make secure world call for mem ownership switch
remoteproc: qcom: refactor mss fw image loading sequence
firmware: scm: Add new SCM call API for switching memory ownership
This turn RPMSG_VIRTIO into a user selectable config, fixes a few bugs in GLINK
and provides the support for specifying initial buffer sizes for GLINK
channels.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jirb
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
- turn RPMSG_VIRTIO into a user selectable config
- fix few bugs in GLINK
- provide the support for specifying initial buffer sizes for GLINK
channels.
* tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc:
rpmsg: glink: The mbox client knows_txdone
rpmsg: glink: Add missing MODULE_LICENSE
rpmsg: glink: Use best fit intent during tx
rpmsg: glink: Add support to preallocate intents
dt-bindings: soc: qcom: Support GLINK intents
rpmsg: glink: Initialize the "intent_req_comp" completion variable
rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfig
large change that introduces runtime PM support to the clk framework. Now we
properly call runtime PM operations on the device providing a clk when the clk
is in use. This helps on SoCs where the clks provided by a device need
something to be powered on before using the clks, like power domains or
regulators. It also helps power those things down when clks aren't in use. The
other core change is a devm API addition for clk providers so we can get rid of
a bunch of clk driver remove functions that are just doing
of_clk_del_provider().
Outside of the core, we have the usual addition of clk drivers and smattering
of non-critical fixes to existing drivers. The biggest diff is support for
Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch
of data.
By the way, we're trying something new here where we build the tree up with
topic branches. We plan to work this into our workflow so that we don't step
on each other's toes, and so the fixes branch can be merged on an as-needed
basis.
Core:
- Runtime PM support for clk providers
- devm API for of_clk_add_hw_provider()
New Drivers:
- Mediatek MT2712 and MT7622
- Renesas R-Car V3M SoC
Updates:
- Runtime PM support for Samsung exynos5433/exynos4412 providers
- Removal of clkdev aliases on Samsung SoCs
- Convert clk-gpio to use gpio descriptors
- Various driver cleanups to match kernel coding style
- Amlogic Video Processing Unit VPU and VAPB clks
- Sigma-delta modulation for Allwinner audio PLLs
- Allwinner A83t Display clks
- Support for the second display unit clock on Renesas RZ/G1E
- Suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
- New clock ids for Rockchip rk3188 and rk3368 SoCs
- Various 'const' markings on clk_ops structures
- RPM clk support on Qualcomm MSM8996/MSM8660 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hC7z
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have two changes to the core framework this time around.
The first being a large change that introduces runtime PM support to
the clk framework. Now we properly call runtime PM operations on the
device providing a clk when the clk is in use. This helps on SoCs
where the clks provided by a device need something to be powered on
before using the clks, like power domains or regulators. It also helps
power those things down when clks aren't in use.
The other core change is a devm API addition for clk providers so we
can get rid of a bunch of clk driver remove functions that are just
doing of_clk_del_provider().
Outside of the core, we have the usual addition of clk drivers and
smattering of non-critical fixes to existing drivers. The biggest diff
is support for Mediatek MT2712 and MT7622 SoCs, but those patches
really just add a bunch of data.
By the way, we're trying something new here where we build the tree up
with topic branches. We plan to work this into our workflow so that we
don't step on each other's toes, and so the fixes branch can be merged
on an as-needed basis.
Summary:
Core:
- runtime PM support for clk providers
- devm API for of_clk_add_hw_provider()
New Drivers:
- Mediatek MT2712 and MT7622
- Renesas R-Car V3M SoC
Updates:
- runtime PM support for Samsung exynos5433/exynos4412 providers
- removal of clkdev aliases on Samsung SoCs
- convert clk-gpio to use gpio descriptors
- various driver cleanups to match kernel coding style
- Amlogic Video Processing Unit VPU and VAPB clks
- sigma-delta modulation for Allwinner audio PLLs
- Allwinner A83t Display clks
- support for the second display unit clock on Renesas RZ/G1E
- suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
- new clock ids for Rockchip rk3188 and rk3368 SoCs
- various 'const' markings on clk_ops structures
- RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
clk: stm32h7: fix test of clock config
clk: pxa: fix building on older compilers
clk: sunxi-ng: a83t: Fix i2c buses bits
clk: ti: dra7-atl-clock: fix child-node lookups
clk: qcom: common: fix legacy board-clock registration
clk: uniphier: fix DAPLL2 clock rate of Pro5
clk: uniphier: fix parent of miodmac clock data
clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
clk: hi3660: fix incorrect uart3 clock freqency
clk: kona-setup: Delete error messages for failed memory allocations
ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
clk: cdce925: remove redundant check for non-null parent_name
clk: versatile: Improve sizeof() usage
clk: versatile: Delete error messages for failed memory allocations
clk: ux500: Improve sizeof() usage
clk: ux500: Delete error messages for failed memory allocations
clk: spear: Delete error messages for failed memory allocations
clk: ti: Delete error messages for failed memory allocations
clk: mmp: Adjust checks for NULL pointers
...
"obj-y += foo/" syntax requires Kbuild to visit the "foo" subdirectory
and link built-in.o from that directory. This means foo/Makefile is
responsible for creating built-in.o even if there is no object to
link (in this case, built-in.o is an empty archive).
We have had several fixups like commit 4b024242e8 ("kbuild: Fix
linking error built-in.o no such file or directory"), then ended up
with a complex condition as follows:
ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
We still have more cases not covered by the above, so we need to add
obj- := dummy.o
in several places just for creating empty built-in.o.
A key point is, the parent Makefile knows whether built-in.o is needed
or not. If a subdirectory needs to create built-in.o, its parent can
tell the fact when descending.
If non-empty $(need-builtin) flag is passed from the parent, built-in.o
should be created. $(obj-y) should be still checked to support the
single target "%/". All of ugly tricks will go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Most places use pwd and rely on $PATH lookup. Moving the remaining
absolute path /bin/pwd users over for consistency.
Also, a reason for doing /bin/pwd -> pwd instead of the other way around
is because I believe build systems should make little assumptions on
host filesystem layout. Case in point, we do this kind of patching
already in NixOS.
Ref. commit 028568d84d
("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)").
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Clean up and fix RPM package build
- Fix a warning in DEB package build
- Improve coccicheck script
- Improve some semantic patches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7aYW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild misc updates from Masahiro Yamada:
- Clean up and fix RPM package build
- Fix a warning in DEB package build
- Improve coccicheck script
- Improve some semantic patches
* tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
docs: dev-tools: coccinelle: delete out of date wiki reference
coccinelle: orplus: reorganize to improve performance
coccinelle: use exists to improve efficiency
builddeb: Pass the kernel:debarch substvar to dpkg-genchanges
Coccinelle: use false positive annotation
coccinelle: fix verbose message about .cocci file being run
coccinelle: grep Options and Requires fields more precisely
Coccinelle: make DEBUG_FILE option more useful
coccinelle: api: detect identical chip data arrays
coccinelle: Improve setup_timer.cocci matching
Coccinelle: setup_timer: improve messages from setup_timer
kbuild: rpm-pkg: do not force -jN in submake
kbuild: rpm-pkg: keep spec file until make mrproper
kbuild: rpm-pkg: fix jobserver unavailable warning
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot}
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled
kbuild: rpm-pkg: refactor mkspec with here doc
kbuild: rpm-pkg: clean up mkspec
kbuild: rpm-pkg: install vmlinux.bz2 unconditionally
kbuild: rpm-pkg: remove ppc64 specific image handling
One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and
their results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zIdO
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and their
results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation"
* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
sh: decompressor: add shipped files to .gitignore
frv: .gitignore: ignore vmlinux.lds
selinux: remove unnecessary assignment to subdir-
kbuild: specify FORCE in Makefile.headersinst as .PHONY target
kbuild: remove redundant mkdir from ./Kbuild
kbuild: optimize object directory creation for incremental build
kbuild: create object directories simpler and faster
kbuild: filter-out PHONY targets from "targets"
kbuild: remove redundant $(wildcard ...) for cmd_files calculation
kbuild: create directory for make cache only when necessary
sh: select KBUILD_DEFCONFIG depending on ARCH
kbuild: fix linker feature test macros when cross compiling with Clang
kbuild: shrink .cache.mk when it exceeds 1000 lines
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
kbuild: Cache a few more calls to the compiler
kbuild: Add a cache for generated variables
kbuild: add forward declaration of default target to Makefile.asm-generic
kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
...
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.
This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Johan Hovold <johan@kernel.org>
Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the dma_mapping_error call to use the correct dma_addr
which is inside the ibmvnic_vpd struct. Moreover, it fixes an uninitialized
warning regarding a local dma_addr variable which is not used anymore.
Fixes: 4e6759be28 ("ibmvnic: Feature implementation of VPD for the ibmvnic driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When call to register_netdevice() (called from ipvlan_link_new()) fails,
we call ipvlan_uninit() (through ndo_uninit()) to destroy the ipvlan
port. After returning unsuccessfully from register_netdevice() we go
ahead and call ipvlan_port_destroy() again which causes NULL pointer
dereference panic. Fix the issue by making ipvlan_init() and
ipvlan_uninit() call symmetric.
The ipvlan port will now be created inside ipvlan_init() and will be
destroyed in ipvlan_uninit().
Fixes: 2ad7bf3638 (ipvlan: Initial check-in of the IPVLAN driver)
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when ip route flush cache and it turn out all fnhe_genid != genid.
If a redirect/pmtu icmp packet comes and the old fnhe is found and all
it's members but fnhe_genid will be updated.
Then next time when it looks up route and tries to rebind this fnhe to
the new dst, the fnhe will be flushed due to fnhe_genid != genid. It
causes this redirect/pmtu icmp packet acutally not to be applied.
This patch is to also reset fnhe_genid when updating a route cache.
Fixes: 5aad1de5ea ("ipv4: use separate genid for next hop exceptions")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when creating fnhe for redirect, it sets fnhe_expires for this
new route cache. But when updating the exist one, it doesn't do it.
It will cause this fnhe never to be expired.
Paolo already noticed it before, in Jianlin's test case, it became
even worse:
When ip route flush cache, the old fnhe is not to be removed, but
only clean it's members. When redirect comes again, this fnhe will
be found and updated, but never be expired due to fnhe_expires not
being set.
So fix it by simply updating fnhe_expires even it's for redirect.
Fixes: aee06da672 ("ipv4: use seqlock for nh_exceptions")
Reported-by: Jianlin Shi <jishi@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now in sctp_setsockopt_maxseg user_frag or frag_point can be set with
val >= 8 and val <= SCTP_MAX_CHUNK_LEN. But both checks are incorrect.
val >= 8 means frag_point can even be less than SCTP_DEFAULT_MINSEGMENT.
Then in sctp_datamsg_from_user(), when it's value is greater than cookie
echo len and trying to bundle with cookie echo chunk, the first_len will
overflow.
The worse case is when it's value is equal as cookie echo len, first_len
becomes 0, it will go into a dead loop for fragment later on. In Hangbin
syzkaller testing env, oom was even triggered due to consecutive memory
allocation in that loop.
Besides, SCTP_MAX_CHUNK_LEN is the max size of the whole chunk, it should
deduct the data header for frag_point or user_frag check.
This patch does a proper check with SCTP_DEFAULT_MINSEGMENT subtracting
the sctphdr and datahdr, SCTP_MAX_CHUNK_LEN subtracting datahdr when
setting frag_point via sockopt. It also improves sctp_setsockopt_maxseg
codes.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the cases where len is too long, the error return path fails to
kfree allocated buffers buf and usb_reg_buf. The simplest fix is to
perform the sanity check on len before the allocations to avoid having
to do the kfree'ing in the first place.
Detected by CoverityScan, CID#1452258,1452259 ("Resource Leak")
Fixes: 59f73e2ae1 ("rsi: check length before USB read/write register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add list_next_rcu() for fetching next list in rcu_deference safely.
Found with sparse in linux-next tree on tag next-20171116.
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up the EXPERT menu (yet again).
Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since
they already depend on EXPERT.
Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu
list since they do not depend on EXPERT and were breaking the continuity
of that menu list.
Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu.
This separates the kernel services from the build options.
This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu
(https://lkml.org/lkml/2017/11/2/907).
Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> [BPF]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removed the last user of parent_node().
The parent_node() macro in generic situation is unnecessary.
Remove it for cleanup.
Link: http://lkml.kernel.org/r/1504234599-29533-8-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removed the last user of parent_node().
The parent_node() macro in tile platform is unnecessary.
Remove it for cleanup.
Link: http://lkml.kernel.org/r/1504234599-29533-7-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removed the last user of parent_node().
The parent_node() macro in SPARC64 platform is unnecessary.
Remove it for cleanup.
Link: http://lkml.kernel.org/r/1504234599-29533-6-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removed the last user of parent_node().
The parent_node() macro in SUPERH platform is unnecessary.
Remove it for cleanup.
Link: http://lkml.kernel.org/r/1504234599-29533-5-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a7be6e5a7f ("mm: drop useless local parameters of
__register_one_node()") removed the last user of parent_node().
The parent_node() macro in IA64(Itanium) platform is unnecessary.
Remove it for cleanup.
Link: http://lkml.kernel.org/r/1504234599-29533-2-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pcmv_setup() is only used when the badge4 driver is built-in, but not
when it is a loadable module:
drivers/pcmcia/sa1111_badge4.c:153:122: error: 'pcmv_setup' defined but not used [-Werror=unused-function]
This adds an #ifdef to avoid the definition of the unused function in
the modular case.
Link: http://lkml.kernel.org/r/20170911201133.3421636-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Performance of get_user_pages_fast() is critical for some workloads, but
it's tricky to test it directly.
This patch provides /sys/kernel/debug/gup_benchmark that helps with
testing performance of it.
See tools/testing/selftests/vm/gup_benchmark.c for userspace
counterpart.
Link: http://lkml.kernel.org/r/20170908215603.9189-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bhumika Goyal