The networking layer does not reliably report the distinction between
a non-block write failing because:
1/ the queue is too full already and
2/ a memory allocation attempt failed.
The distinction is important because in the first case it is
appropriate to retry as soon as the socket reports that it is
writable, and in the second case a small delay is required as the
socket will most likely report as writable but kmalloc could still
fail.
sk_stream_wait_memory() exhibits this distinction nicely, setting
'vm_wait' if a small wait is needed. However in the non-blocking case
it always returns -EAGAIN no matter the cause of the failure. This
-EAGAIN call get all the way to sunrpc.
The sunrpc layer expects EAGAIN to indicate the first cause, and
ENOBUFS to indicate the second. Various documentation suggests that
this is not unreasonable, but does not guarantee the desired error
codes.
The result of getting -EAGAIN when -ENOBUFS is expected is that the
send is tried again in a tight loop and soft lockups are reported.
so: add tests after calls to xs_sendpages() to translate -EAGAIN into
-ENOBUFS if the socket is writable. This cannot happen inside
xs_sendpages() as the test for "is socket writable" is different
between TCP and UDP.
With this change, the tight loop retrying xs_sendpages() becomes a
loop which only retries every 250ms, and so will not trigger a
soft-lockup warning.
It is possible that the write did fail because the queue was too full
and by the time xs_sendpages() completed, the queue was writable
again. In this case an extra 250ms delay is inserted that isn't
really needed. This circumstance suggests a degree of congestion so a
delay is not necessarily a bad thing, and it can only cause a single
250ms delay, not a series of them.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Calling xprt_complete_bc_request() effectively causes the slot to be allocated,
so it needs to decrement the backchannel free slot count as well.
Fixes: 0d2a970d0a ("SUNRPC: Fix a backchannel race")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
xprt_alloc_bc_request() cannot call xprt_free_bc_request() without
deadlocking, since it already holds the xprt->bc_pa_lock.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: 0d2a970d0a ("SUNRPC: Fix a backchannel race")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit 0bf4828983 ("svcrdma: refactor marshalling logic") removed
the last call site for svc_rdma_fastreg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Kernel coding conventions frown upon having large nontrivial
functions in header files, and the preference these days is to
allow the compiler to make inlining decisions if possible.
As these functions are re-homed into a .c file, be sure that
comparisons with fields in struct rpcrdma_msg are with be32
constants.
This is a refactoring change; no behavior change is intended.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The Linux NFS server returns garbage in the data payload of inline
NFS/RDMA READ replies. These are READs of under 1000 bytes or so
where the client has not provided either a reply chunk or a write
list.
The NFS server delivers the data payload for an NFS READ reply to
the transport in an xdr_buf page list. If the NFS client did not
provide a reply chunk or a write list, send_reply() is supposed to
set up a separate sge for the page containing the READ data, and
another sge for XDR padding if needed, then post all of the sges via
a single SEND Work Request.
The problem is send_reply() does not advance through the xdr_buf
when setting up scatter/gather entries for SEND WR. It always calls
dma_map_xdr with xdr_off set to zero. When there's more than one
sge, dma_map_xdr() sets up the SEND sge's so they all point to the
xdr_buf's head.
The current Linux NFS/RDMA client always provides a reply chunk or
a write list when performing an NFS READ over RDMA. Therefore, it
does not exercise this particular case. The Linux server has never
had to use more than one extra sge for building RPC/RDMA replies
with a Linux client.
However, an NFS/RDMA client _is_ allowed to send small NFS READs
without setting up a write list or reply chunk. The NFS READ reply
fits entirely within the inline reply buffer in this case. This is
perhaps a more efficient way of performing NFS READs that the Linux
NFS/RDMA client may some day adopt.
Fixes: b432e6b3d9 ('svcrdma: Change DMA mapping logic to . . .')
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=285
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When removing underlying RDMA device, the rmmod will hang forever if there
are any outstanding NFS/RDMA client mounts. The outstanding NFS/RDMA counts
could also prevent the server from shutting down. Further debugging shows
that the existing connections are not teared down and resource are not
released when receiving RDMA_CM_EVENT_DEVICE_REMOVAL event. It seems the
original code missing svc_xprt_put() in RDMA_CM_EVENT_REMOVAL event handler
thus svc_xprt_free is never invoked to release the existing connection
resources.
The patch has been passed removing, adding device back and forth without
stopping NFS/RDMA service. This will also allow a device to be unplugged
and swapped out without shutting down NFS service.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=252
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ENOBUFS means that memory allocations are failing due to an actual
low memory situation. It should not be confused with being out of
socket buffer space.
Handle the problem by just punting to the delay in call_status.
Reported-by: Neil Brown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we're running out of buffer memory when transmitting data, then
we want to just delay for a moment, and then continue transmitting
the remainder of the message.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include:
Stable patches:
- Fix a crash in the NFSv4 file locking code.
- Fix an fsync() regression, where we were failing to retry I/O in some
circumstances.
- Fix an infinite loop in NFSv4.0 OPEN stateid recovery
- Fix a memory leak when an attempted pnfs fails.
- Fix a memory leak in the backchannel code
- Large hostnames were not supported correctly in NFSv4.1
- Fix a pNFS/flexfiles bug that was impeding error reporting on I/O.
- Fix a couple of credential issues in pNFS/flexfiles
Bugfixes + cleanups:
- Open flag sanity checks in the NFSv4 atomic open codepath
- More NFSv4 delegation related bugfixes
- Various NFSv4.1 backchannel bugfixes and cleanups
- Fix the NFS swap socket code
- Various cleanups of the NFSv4 SETCLIENTID and EXCHANGE_ID code
- Fix a UDP transport deadlock issue
Features:
- More RDMA client transport improvements
- NFSv4.2 LAYOUTSTATS functionality for pnfs flexfiles.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AREr
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable patches:
- Fix a crash in the NFSv4 file locking code.
- Fix an fsync() regression, where we were failing to retry I/O in
some circumstances.
- Fix an infinite loop in NFSv4.0 OPEN stateid recovery
- Fix a memory leak when an attempted pnfs fails.
- Fix a memory leak in the backchannel code
- Large hostnames were not supported correctly in NFSv4.1
- Fix a pNFS/flexfiles bug that was impeding error reporting on I/O.
- Fix a couple of credential issues in pNFS/flexfiles
Bugfixes + cleanups:
- Open flag sanity checks in the NFSv4 atomic open codepath
- More NFSv4 delegation related bugfixes
- Various NFSv4.1 backchannel bugfixes and cleanups
- Fix the NFS swap socket code
- Various cleanups of the NFSv4 SETCLIENTID and EXCHANGE_ID code
- Fix a UDP transport deadlock issue
Features:
- More RDMA client transport improvements
- NFSv4.2 LAYOUTSTATS functionality for pnfs flexfiles"
* tag 'nfs-for-4.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (87 commits)
nfs: Remove invalid tk_pid from debug message
nfs: Remove invalid NFS_ATTR_FATTR_V4_REFERRAL checking in nfs4_get_rootfh
nfs: Drop bad comment in nfs41_walk_client_list()
nfs: Remove unneeded micro checking of CONFIG_PROC_FS
nfs: Don't setting FILE_CREATED flags always
nfs: Use remove_proc_subtree() instead remove_proc_entry()
nfs: Remove unused argument in nfs_server_set_fsinfo()
nfs: Fix a memory leak when meeting an unsupported state protect
nfs: take extra reference to fl->fl_file when running a LOCKU operation
NFSv4: When returning a delegation, don't reclaim an incompatible open mode.
NFSv4.2: LAYOUTSTATS is optional to implement
NFSv4.2: Fix up a decoding error in layoutstats
pNFS/flexfiles: Fix the reset of struct pgio_header when resending
pNFS/flexfiles: Turn off layoutcommit for servers that don't need it
pnfs/flexfiles: protect ktime manipulation with mirror lock
nfs: provide pnfs_report_layoutstat when NFS42 is disabled
nfs: verify open flags before allowing open
nfs: always update creds in mirror, even when we have an already connected ds
nfs: fix potential credential leak in ff_layout_update_mirror_cred
pnfs/flexfiles: report layoutstat regularly
...
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
speed module address lookup. He found some abusers of the module lock
doing that too.
A little bit of parameter work here too; including Dan Streetman's breaking
up the big param mutex so writing a parameter can load another module (yeah,
really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and
!CONFIG_SYSFS, so those fixes were appended too.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tWPQ
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Main excitement here is Peter Zijlstra's lockless rbtree optimization
to speed module address lookup. He found some abusers of the module
lock doing that too.
A little bit of parameter work here too; including Dan Streetman's
breaking up the big param mutex so writing a parameter can load
another module (yeah, really). Unfortunately that broke the usual
suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
appended too"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
modules: only use mod->param_lock if CONFIG_MODULES
param: fix module param locks when !CONFIG_SYSFS.
rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
module: add per-module param_lock
module: make perm const
params: suppress unused variable error, warn once just in case code changes.
modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
kernel/module.c: avoid ifdefs for sig_enforce declaration
kernel/workqueue.c: remove ifdefs over wq_power_efficient
kernel/params.c: export param_ops_bool_enable_only
kernel/params.c: generalize bool_enable_only
kernel/module.c: use generic module param operaters for sig_enforce
kernel/params: constify struct kernel_param_ops uses
sysfs: tightened sysfs permission checks
module: Rework module_addr_{min,max}
module: Use __module_address() for module_address_lookup()
module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
module: Optimize __module_address() using a latched RB-tree
rbtree: Implement generic latch_tree
seqlock: Introduce raw_read_seqcount_latch()
...
Pull nfsd updates from Bruce Fields:
"A relatively quiet cycle, with a mix of cleanup and smaller bugfixes"
* 'for-4.2' of git://linux-nfs.org/~bfields/linux: (24 commits)
sunrpc: use sg_init_one() in krb5_rc4_setup_enc/seq_key()
nfsd: wrap too long lines in nfsd4_encode_read
nfsd: fput rd_file from XDR encode context
nfsd: take struct file setup fully into nfs4_preprocess_stateid_op
nfsd: refactor nfs4_preprocess_stateid_op
nfsd: clean up raparams handling
nfsd: use swap() in sort_pacl_range()
rpcrdma: Merge svcrdma and xprtrdma modules into one
svcrdma: Add a separate "max data segs macro for svcrdma
svcrdma: Replace GFP_KERNEL in a loop with GFP_NOFAIL
svcrdma: Keep rpcrdma_msg fields in network byte-order
svcrdma: Fix byte-swapping in svc_rdma_sendto.c
nfsd: Update callback sequnce id only CB_SEQUENCE success
nfsd: Reset cb_status in nfsd4_cb_prepare() at retrying
svcrdma: Remove svc_rdma_xdr_decode_deferred_req()
SUNRPC: Move EXPORT_SYMBOL for svc_process
uapi/nfs: Add NFSv4.1 ACL definitions
nfsd: Remove dead declarations
nfsd: work around a gcc-5.1 warning
nfsd: Checking for acl support does not require fetching any acls
...
Use the TCP_USER_TIMEOUT socket option to advertise to the server
how long we will keep the connection open if there is unacknowledged
data. See RFC5482.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This fixes a regression introduced by commit caf4ccd4e8 ("SUNRPC:
Make xs_tcp_close() do a socket shutdown rather than a sock_release").
Prior to that commit, the autoclose feature would ensure that an
idle connection would result in the socket being both disconnected and
released, whereas now only gets disconnected.
While the current behaviour is harmless, it does leave the port bound
until either RPC traffic resumes or the RPC client is shut down.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the back channel is disconnected, we can and should just fail the
transmission. The expectation is that the NFSv4.1 server will always
retransmit any outstanding callbacks once the connection is
re-established.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
These patches continue to build up for improving the rsize and wsize that the
NFS client uses when talking over RDMA. In addition, these patches also add
in scalability enhancements and other bugfixes.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=N1tO
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.2' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFSoRDMA Client Changes
These patches continue to build up for improving the rsize and wsize that the
NFS client uses when talking over RDMA. In addition, these patches also add
in scalability enhancements and other bugfixes.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-for-4.2' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (142 commits)
xprtrdma: Reduce per-transport MR allocation
xprtrdma: Stack relief in fmr_op_map()
xprtrdma: Split rb_lock
xprtrdma: Remove rpcrdma_ia::ri_memreg_strategy
xprtrdma: Remove ->ro_reset
xprtrdma: Remove unused LOCAL_INV recovery logic
xprtrdma: Acquire MRs in rpcrdma_register_external()
xprtrdma: Introduce an FRMR recovery workqueue
xprtrdma: Acquire FMRs in rpcrdma_fmr_register_external()
xprtrdma: Introduce helpers for allocating MWs
xprtrdma: Use ib_device pointer safely
xprtrdma: Remove rr_func
xprtrdma: Replace rpcrdma_rep::rr_buffer with rr_rxprt
xprtrdma: Warn when there are orphaned IB objects
...
If the sending queue has a task without ->rq_cong set at the front,
and then a number of tasks with ->rq_cong set such that they use
the entire congestion window, then the queue deadlocks. The first
entry cannot be processed until later entries complete.
This scenario has been seen with a client using UDP to access a server,
and the network connection breaking for a period of time - it doesn't
recover.
It never really makes sense for an ->rq_cong request to be on the ->sending
queue, but it can happen when a request is being retried, and finds
the transport if locked (XPRT_LOCKED). In this case we simple call
__xprt_put_cong() and the deadlock goes away.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, ib_create_cq uses cqe and comp_vecotr instead
of the extendible ib_cq_init_attr struct.
Earlier patches already changed the vendors to work with
ib_cq_init_attr. This patch changes the consumers too.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reduce resource consumption per-transport to make way for increasing
the credit limit and maximum r/wsize. Pre-allocate fewer MRs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
fmr_op_map() declares a 64 element array of u64 in automatic
storage. This is 512 bytes (8 * 64) on the stack.
Instead, when FMR memory registration is in use, pre-allocate a
physaddr array for each rpcrdma_mw.
This is a pre-requisite for increasing the r/wsize maximum for
FMR on platforms with 4KB pages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
/proc/lock_stat showed contention between rpcrdma_buffer_get/put
and the MR allocation functions during I/O intensive workloads.
Now that MRs are no longer allocated in rpcrdma_buffer_get(),
there's no reason the rb_mws list has to be managed using the
same lock as the send/receive buffers. Split that lock. The
new lock does not need to disable interrupts because buffer
get/put is never called in an interrupt context.
struct rpcrdma_buffer is re-arranged to ensure rb_mwlock and rb_mws
are always in a different cacheline than rb_lock and the buffer
pointers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An RPC can exit at any time. When it does so, xprt_rdma_free() is
called, and it calls ->op_unmap().
If ->ro_reset() is running due to a transport disconnect, the two
methods can race while processing the same rpcrdma_mw. The results
are unpredictable.
Because of this, in previous patches I've altered ->ro_map() to
handle MR reset. ->ro_reset() is no longer needed and can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Acquiring 64 MRs in rpcrdma_buffer_get() while holding the buffer
pool lock is expensive, and unnecessary because most modern adapters
can transfer 100s of KBs of payload using just a single MR.
Instead, acquire MRs one-at-a-time as chunks are registered, and
return them to rb_mws immediately during deregistration.
Note: commit 539431a437 ("xprtrdma: Don't invalidate FRMRs if
registration fails") is reverted: There is now a valid case where
registration can fail (with -ENOMEM) but the QP is still in RTS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After a transport disconnect, FRMRs can be left in an undetermined
state. In particular, the MR's rkey is no good.
Currently, FRMRs are fixed up by the transport connect worker, but
that can race with ->ro_unmap if an RPC happens to exit while the
transport connect worker is running.
A better way of dealing with broken FRMRs is to detect them before
they are re-used by ->ro_map. Such FRMRs are either already invalid
or are owned by the sending RPC, and thus no race with ->ro_unmap
is possible.
Introduce a mechanism for handing broken FRMRs to a workqueue to be
reset in a context that is appropriate for allocating resources
(ie. an ib_alloc_fast_reg_mr() API call).
This mechanism is not yet used, but will be in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Acquiring 64 FMRs in rpcrdma_buffer_get() while holding the buffer
pool lock is expensive, and unnecessary because FMR mode can
transfer up to a 1MB payload using just a single ib_fmr.
Instead, acquire ib_fmrs one-at-a-time as chunks are registered, and
return them to rb_mws immediately during deregistration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We eventually want to handle allocating MWs one at a time, as
needed, instead of grabbing 64 and throwing them at each RPC in the
pipeline.
Add a helper for grabbing an MW off rb_mws, and a helper for
returning an MW to rb_mws. These will be used in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The connect worker can replace ri_id, but prevents ri_id->device
from changing during the lifetime of a transport instance. The old
ID is kept around until a new ID is created and the ->device is
confirmed to be the same.
Cache a copy of ri_id->device in rpcrdma_ia and in rpcrdma_rep.
The cached copy can be used safely in code that does not serialize
with the connect worker.
Other code can use it to save an extra address generation (one
pointer dereference instead of two).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A posted rpcrdma_rep never has rr_func set to anything but
rpcrdma_reply_handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Instead of carrying a pointer to the buffer pool and
the rpc_xprt, carry a pointer to the controlling rpcrdma_xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
WARN during transport destruction if ib_dealloc_pd() fails. This is
a sign that xprtrdma orphaned one or more RDMA API objects at some
point, which can pin lower layer kernel modules and cause shutdown
to hang.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Devesh Sharma <devesh.sharma@avagotech.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cross-compile test on ARCH=mn10300:
In file included from include/linux/list.h:8:0,
from include/linux/wait.h:6,
from include/linux/fs.h:6,
from include/linux/debugfs.h:18,
from net/sunrpc/debugfs.c:7:
net/sunrpc/debugfs.c: In function 'fault_disconnect_write':
include/linux/kernel.h:723:17: warning: comparison of distinct pointer
types lacks a cast
(void) (&_min1 == &_min2); \
^
>> net/sunrpc/debugfs.c:307:8: note: in expansion of macro 'min'
len = min(len, sizeof(buffer) - 1);
Fixes: ('SUNRPC: Transport fault injection')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It has been exceptionally useful to exercise the logic that handles
local immediate errors and RDMA connection loss. To enable
developers to test this regularly and repeatably, add logic to
simulate connection loss every so often.
Fault injection is disabled by default. It is enabled with
$ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect
where "xxx" is a large positive number of transport method calls
before a disconnect. A value of several thousand is usually a good
number that allows reasonable forward progress while still causing a
lot of connection drops.
These hooks are disabled when SUNRPC_DEBUG is turned off.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
RDMA xprts don't have a sock_xprt, but an rdma_xprt, so the
xs_swapper_enable/disable functions will likely oops when fed an RDMA
xprt. Turn these functions into rpc_xprt_ops so that that doesn't
occur. For now the RDMA versions are no-ops that just return -EINVAL
on an attempt to swapon.
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's possible that we could race with a call to xs_reset_transport, in
which case the xprt->inet pointer could be zeroed out while we're
accessing it. Lock the xprt before we try to set memalloc on it.
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We currently increment the memalloc_socks counter if we have a xprt that
is associated with a swapfile. That socket can be replaced however
during a reconnect event, and the memalloc_socks counter is never
decremented if that occurs.
When tearing down a xprt socket, check to see if the xprt is set up for
swapping and sk_clear_memalloc before releasing the socket if so.
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Split xs_swapper into enable/disable functions and eliminate the
"enable" flag.
Currently, it's racy if you have multiple swapon/swapoff operations
running in parallel over the same xprt. Also fix it so that we only
set it to a memalloc socket on a 0->1 transition and only clear it
on a 1->0 transition.
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Jerome reported seeing a warning pop when working with a swapfile on
NFS. The nfs_swap_activate can end up calling sk_set_memalloc while
holding the rcu_read_lock and that function can sleep.
To fix that, we need to take a reference to the xprt while holding the
rcu_read_lock, set the socket up for swapping and then drop that
reference. But, xprt_put is not exported and having NFS deal with the
underlying xprt is a bit of layering violation anyway.
Fix this by adding a set of activate/deactivate functions that take a
rpc_clnt pointer instead of an rpc_xprt, and have nfs_swap_activate and
nfs_swap_deactivate call those.
Also, add a per-rpc_clnt atomic counter to keep track of the number of
active swapfiles associated with it. When the counter does a 0->1
transition, we enable swapping on the xprt, when we do a 1->0 transition
we disable swapping on it.
This also allows us to be a bit more selective with the RPC_TASK_SWAPPER
flag. If non-swapper and swapper clnts are sharing a xprt, then we only
need to flag the tasks from the swapper clnt with that flag.
Acked-by: Mel Gorman <mgorman@suse.de>
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to allow the server to send a new request immediately after we've
replied to the previous one. Right now, there is a window between the
send and the release of the old request in rpc_put_task(), where the
server could send us a new backchannel RPC call, and we have no
request to service it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Bi-directional RPC support means code in svcrdma.ko invokes a bit of
code in xprtrdma.ko, and vice versa. To avoid loader/linker loops,
merge the server and client side modules together into a single
module.
When backchannel capabilities are added, the combined module will
register all needed transport capabilities so that Upper Layer
consumers automatically have everything needed to create a
bi-directional transport connection.
Module aliases are added for backwards compatibility with user
space, which still may expect svcrdma.ko or xprtrdma.ko to be
present.
This commit reverts commit 2e8c12e1b7 ("xprtrdma: add separate
Kconfig options for NFSoRDMA client and server support") and
provides a single CONFIG option for enabling the new module.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server and client maximum are architecturally independent.
Allow changing one without affecting the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
At the 2015 LSF/MM, it was requested that memory allocation
call sites that request GFP_KERNEL allocations in a loop should be
annotated with __GFP_NOFAIL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fields in struct rpcrdma_msg are __be32. Don't byte-swap these
fields when decoding RPC calls and then swap them back for the
reply. For the most part, they can be left alone.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In send_write_chunks(), we have:
for (xdr_off = rqstp->rq_res.head[0].iov_len, chunk_no = 0;
xfer_len && chunk_no < arg_ary->wc_nchunks;
chunk_no++) {
. . .
}
Note that arg_ary->wc_nchunk is in network byte-order. For the
comparison to work correctly, both have to be in native byte-order.
In send_reply_chunks, we have:
write_len = min(xfer_len, htonl(ch->rs_length));
xfer_len is in native byte-order, and ch->rs_length is in
network byte-order. be32_to_cpu() is the correct byte swap
for ch->rs_length.
As an additional clean up, replace ntohl() with be32_to_cpu() in
a few other places.
This appears to address a problem with large rsize hangs while
using PHYSICAL memory registration. I suspect that is the only
registration mode that uses more than one chunk element.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_xdr_decode_deferred_req() indexes an array with an
un-byte-swapped value off the wire. Fortunately this function
isn't used anywhere, so simply remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Merge bc_send() into bc_svc_process().
Note: even thought this touches svc.c, it is a client-side change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Several functions have outdated arguments listed in the doc comments.
Drop documentation for arguments that no longer exist.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.
In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.
Test compiled on x86_64 against:
* allnoconfig
* allmodconfig
* allyesconfig
@ const_found @
identifier ops;
@@
const struct kernel_param_ops ops = {
};
@ const_not_found depends on !const_found @
identifier ops;
@@
-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};
Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After discussion upstream, it was agreed to transition the usage of iboe
in the kernel to roce. This keeps our terminology consistent with what
was finalized in the IBTA Annex 16 and IBTA Annex 17 publications.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce helper rdma_cap_read_multi_sge() to help us check if the port of an
IB device support RDMA Read Multiple Scatter-Gather Entries.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use raw management helpers to reform IB-ulp xprtrdma.
Signed-off-by: Michael Wang <yun.wang@profitbricks.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In an environment where the KDC is running Active Directory, the
exported composite name field returned in the context could be large
enough to span a page boundary. Attaching a scratch buffer to the
decoding xdr_stream helps deal with those cases.
The case where we saw this was actually due to behavior that's been
fixed in newer gss-proxy versions, but we're fixing it here too.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
Stable patches:
- Fix a regression in /proc/self/mountstats
- Fix the pNFS flexfiles O_DIRECT support
- Fix high load average due to callback thread sleeping
Bugfixes:
- Various patches to fix the pNFS layoutcommit support
- Do not cache pNFS deviceids unless server notifications are enabled
- Fix a SUNRPC transport reconnection regression
- make debugfs file creation failure non-fatal in SUNRPC
- Another fix for circular directory warnings on NFSv4 "junctioned" mountpoints
- Fix locking around NFSv4.2 fallocate() support
- Truncating NFSv4 file opens should also sync O_DIRECT writes
- Prevent infinite loop in rpcrdma_ep_create()
Features:
- Various improvements to the RDMA transport code's handling of memory
registration
- Various code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=j5dP
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Another set of mainly bugfixes and a couple of cleanups. No new
functionality in this round.
Highlights include:
Stable patches:
- Fix a regression in /proc/self/mountstats
- Fix the pNFS flexfiles O_DIRECT support
- Fix high load average due to callback thread sleeping
Bugfixes:
- Various patches to fix the pNFS layoutcommit support
- Do not cache pNFS deviceids unless server notifications are enabled
- Fix a SUNRPC transport reconnection regression
- make debugfs file creation failure non-fatal in SUNRPC
- Another fix for circular directory warnings on NFSv4 "junctioned"
mountpoints
- Fix locking around NFSv4.2 fallocate() support
- Truncating NFSv4 file opens should also sync O_DIRECT writes
- Prevent infinite loop in rpcrdma_ep_create()
Features:
- Various improvements to the RDMA transport code's handling of
memory registration
- Various code cleanups"
* tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits)
fs/nfs: fix new compiler warning about boolean in switch
nfs: Remove unneeded casts in nfs
NFS: Don't attempt to decode missing directory entries
Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one"
NFS: Rename idmap.c to nfs4idmap.c
NFS: Move nfs_idmap.h into fs/nfs/
NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h
NFS: Add a stub for GETDEVICELIST
nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes
nfs: fix DIO good bytes calculation
nfs: Fetch MOUNTED_ON_FILEID when updating an inode
sunrpc: make debugfs file creation failure non-fatal
nfs: fix high load average due to callback thread sleeping
NFS: Reduce time spent holding the i_mutex during fallocate()
NFS: Don't zap caches on fallocate()
xprtrdma: Make rpcrdma_{un}map_one() into inline functions
xprtrdma: Handle non-SEND completions via a callout
xprtrdma: Add "open" memreg op
xprtrdma: Add "destroy MRs" memreg op
xprtrdma: Add "reset MRs" memreg op
...
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
This patch series creates an operation vector for each of the different
memory registration modes. This should make it easier to one day increase
credit limit, rsize, and wsize.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Fkzr
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.1-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: NFSoRDMA Client Changes
This patch series creates an operation vector for each of the different
memory registration modes. This should make it easier to one day increase
credit limit, rsize, and wsize.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* bugfixes:
NFSv4: Return delegations synchronously in evict_inode
SUNRPC: Fix a regression when reconnecting
NFS: remount with security change should return EINVAL
nfs: do not export discarded symbols
NFSv4.1: don't export static symbol
v2: gracefully handle the case where some dentry pointers end up NULL
and be more dilligent about zeroing out dentry pointers
We currently have a problem that SELinux policy is being enforced when
creating debugfs files. If a debugfs file is created as a side effect of
doing some syscall, then that creation can fail if the SELinux policy
for that process prevents it.
This seems wrong. We don't do that for files under /proc, for instance,
so Bruce has proposed a patch to fix that.
While discussing that patch however, Greg K.H. stated:
"No kernel code should care / fail if a debugfs function fails, so
please fix up the sunrpc code first."
This patch converts all of the sunrpc debugfs setup code to be void
return functins, and the callers to not look for errors from those
functions.
This should allow rpc_clnt and rpc_xprt creation to work, even if the
kernel fails to create debugfs files for some reason.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf(). If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).
So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired. Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.
This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst. For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.
In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small. We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.
In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.
In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.
[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root. For these systems,
supporting multiple users is not necessary.
This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional. It is enabled
under CONFIG_EXPERT menu.
When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.
The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.
Also, groups.c is compiled out completely.
In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.
This change saves about 25 KB on a defconfig build. The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB. (The 25k goes down a bit with allnoconfig, but not that much.
The kernel was booted in Qemu. All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.
Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
socket inodes and sunrpc filesystems - inodes owned by that code
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull networking updates from David Miller:
1) Add BQL support to via-rhine, from Tino Reichardt.
2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
can support hw switch offloading. From Floria Fainelli.
3) Allow 'ip address' commands to initiate multicast group join/leave,
from Madhu Challa.
4) Many ipv4 FIB lookup optimizations from Alexander Duyck.
5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
Borkmann.
6) Remove the ugly compat support in ARP for ugly layers like ax25,
rose, etc. And use this to clean up the neigh layer, then use it to
implement MPLS support. All from Eric Biederman.
7) Support L3 forwarding offloading in switches, from Scott Feldman.
8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
up route lookups even further. From Alexander Duyck.
9) Many improvements and bug fixes to the rhashtable implementation,
from Herbert Xu and Thomas Graf. In particular, in the case where
an rhashtable user bulk adds a large number of items into an empty
table, we expand the table much more sanely.
10) Don't make the tcp_metrics hash table per-namespace, from Eric
Biederman.
11) Extend EBPF to access SKB fields, from Alexei Starovoitov.
12) Split out new connection request sockets so that they can be
established in the main hash table. Much less false sharing since
hash lookups go direct to the request sockets instead of having to
go first to the listener then to the request socks hashed
underneath. From Eric Dumazet.
13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.
14) Support stable privacy address generation for RFC7217 in IPV6. From
Hannes Frederic Sowa.
15) Hash network namespace into IP frag IDs, also from Hannes Frederic
Sowa.
16) Convert PTP get/set methods to use 64-bit time, from Richard
Cochran.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
fm10k: Bump driver version to 0.15.2
fm10k: corrected VF multicast update
fm10k: mbx_update_max_size does not drop all oversized messages
fm10k: reset head instead of calling update_max_size
fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
fm10k: update xcast mode before synchronizing multicast addresses
fm10k: start service timer on probe
fm10k: fix function header comment
fm10k: comment next_vf_mbx flow
fm10k: don't handle mailbox events in iov_event path and always process mailbox
fm10k: use separate workqueue for fm10k driver
fm10k: Set PF queues to unlimited bandwidth during virtualization
fm10k: expose tx_timeout_count as an ethtool stat
fm10k: only increment tx_timeout_count in Tx hang path
fm10k: remove extraneous "Reset interface" message
fm10k: separate PF only stats so that VF does not display them
fm10k: use hw->mac.max_queues for stats
fm10k: only show actual queues, not the maximum in hardware
fm10k: allow creation of VLAN on default vid
fm10k: fix unused warnings
...
Pull trivial tree from Jiri Kosina:
"Usual trivial tree updates. Nothing outstanding -- mostly printk()
and comment fixes and unused identifier removals"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
goldfish: goldfish_tty_probe() is not using 'i' any more
powerpc: Fix comment in smu.h
qla2xxx: Fix printks in ql_log message
lib: correct link to the original source for div64_u64
si2168, tda10071, m88ds3103: Fix firmware wording
usb: storage: Fix printk in isd200_log_config()
qla2xxx: Fix printk in qla25xx_setup_mode
init/main: fix reset_device comment
ipwireless: missing assignment
goldfish: remove unreachable line of code
coredump: Fix do_coredump() comment
stacktrace.h: remove duplicate declaration task_struct
smpboot.h: Remove unused function prototype
treewide: Fix typo in printk messages
treewide: Fix typo in printk messages
mod_devicetable: fix comment for match_flags
We currently have a problem that SELinux policy is being enforced when
creating debugfs files. If a debugfs file is created as a side effect of
doing some syscall, then that creation can fail if the SELinux policy
for that process prevents it.
This seems wrong. We don't do that for files under /proc, for instance,
so Bruce has proposed a patch to fix that.
While discussing that patch however, Greg K.H. stated:
"No kernel code should care / fail if a debugfs function fails, so
please fix up the sunrpc code first."
This patch converts all of the sunrpc debugfs setup code to be void
return functins, and the callers to not look for errors from those
functions.
This should allow rpc_clnt and rpc_xprt creation to work, even if the
kernel fails to create debugfs files for some reason.
Symptoms were failing krb5 mounts on systems using gss-proxy and
selinux.
Fixes: 388f0c7767 "sunrpc: add a debugfs rpc_xprt directory..."
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These functions are called in a loop for each page transferred via
RDMA READ or WRITE. Extract loop invariants and inline them to
reduce CPU overhead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allow each memory registration mode to plug in a callout that handles
the completion of a memory registration operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The open op determines the size of various transport data structures
based on device capabilities and memory registration mode.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Memory Region objects associated with a transport instance are
destroyed before the instance is shutdown and destroyed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This method is invoked when a transport instance is about to be
reconnected. Each Memory Region object is reset to its initial
state.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This method is used when setting up a new transport instance to
create a pool of Memory Region objects that will be used to register
memory during operation.
Memory Regions are not needed for "physical" registration, since
->prepare and ->release are no-ops for that mode.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is very little common processing among the different external
memory deregistration functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is very little common processing among the different external
memory registration functions. Have rpcrdma_create_chunks() call
the registration method directly. This removes a stack frame and a
switch statement from the external registration path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The max_payload computation is generalized to ensure that the
payload maximum is the lesser of RPC_MAX_DATA_SEGS and the number of
data segments that can be transmitted in an inline buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of employing switch() statements, let's use the typical
Linux kernel idiom for handling behavioral variation: virtual
functions.
Start by defining a vector of operations for each supported memory
registration mode, and by adding a source file for each mode.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If a provider advertizes a zero max_fast_reg_page_list_len, FRWR
depth detection loops forever. Instead of just failing the mount,
try other memory registration modes.
Fixes: 0fc6c4e7bb ("xprtrdma: mind the device's max fast . . .")
Reported-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The RPC/RDMA transport's FRWR registration logic registers whole
pages. This means areas in the first and last pages that are not
involved in the RDMA I/O are needlessly exposed to the server.
Buffered I/O is typically page-aligned, so not a problem there. But
for direct I/O, which can be byte-aligned, and for reply chunks,
which are nearly always smaller than a page, the transport could
expose memory outside the I/O buffer.
FRWR allows byte-aligned memory registration, so let's use it as
it was intended.
Reported-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 6ab59945f2 ("xprtrdma: Update rkeys after transport
reconnect" added logic in the ->send_request path to update the
chunk list when an RPC/RDMA request is retransmitted.
Note that rpc_xdr_encode() resets and re-encodes the entire RPC
send buffer for each retransmit of an RPC. The RPC send buffer
is not preserved from the previous transmission of an RPC.
Revert 6ab59945f2, and instead, just force each request to be
fully marshaled every time through ->send_request. This should
preserve the fix from 6ab59945f2, while also performing pullup
during retransmits.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com>
Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com>
Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the task needs to give up the socket lock in order to allow a
reconnect to occur, then it must also clear the 'rq_bytes_sent' field
so that when it retransmits, it knows to start from the beginning.
Fixes: 718ba5b873 ("SUNRPC: Add helpers to prevent socket create from racing")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
fix build-warning introduced by commit: f0eede10fd ("SUNRPC: use
jiffies_to_msecs for converting jiffies") which did not fixup
the format properly (my bad).
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use jiffies_to_msecs for converting jiffies as it handles all of the corner
cases reliably and also helps readability.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
POLL_OUT isn't what callers of ->poll() are expecting to see; it's
actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap
bit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Highlights include:
- Fix a regression in the NFSv4 open state recovery code
- Fix a regression in the NFSv4 close code
- Fix regressions and side-effects of the loop-back mounted NFS fixes
in 3.18, that cause the NFS read() syscall to return EBUSY.
- Fix regressions around the readdirplus code and how it interacts with
the VFS lazy unmount changes that went into v3.18.
- Fix issues with out-of-order RPC call replies replacing updated
attributes with stale ones (particularly after a truncate()).
- Fix an underflow checking issue with RPC/RDMA credits
- Fix a number of issues with the NFSv4 delegation return/free code.
- Fix issues around stale NFSv4.1 leases when doing a mount
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qMB7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Fix a regression in the NFSv4 open state recovery code
- Fix a regression in the NFSv4 close code
- Fix regressions and side-effects of the loop-back mounted NFS fixes
in 3.18, that cause the NFS read() syscall to return EBUSY.
- Fix regressions around the readdirplus code and how it interacts
with the VFS lazy unmount changes that went into v3.18.
- Fix issues with out-of-order RPC call replies replacing updated
attributes with stale ones (particularly after a truncate()).
- Fix an underflow checking issue with RPC/RDMA credits
- Fix a number of issues with the NFSv4 delegation return/free code.
- Fix issues around stale NFSv4.1 leases when doing a mount"
* tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4.1: Clear the old state by our client id before establishing a new lease
NFSv4: Fix a race in NFSv4.1 server trunking discovery
NFS: Don't write enable new pages while an invalidation is proceeding
NFS: Fix a regression in the read() syscall
NFSv4: Ensure we skip delegations that are already being returned
NFSv4: Pin the superblock while we're returning the delegation
NFSv4: Ensure we honour NFS_DELEGATION_RETURNING in nfs_inode_set_delegation()
NFSv4: Ensure that we don't reap a delegation that is being returned
NFS: Fix stateid used for NFS v4 closes
NFSv4: Don't call put_rpccred() under the rcu_read_lock()
NFS: Don't require a filehandle to refresh the inode in nfs_prime_dcache()
NFSv3: Use the readdir fileid as the mounted-on-fileid
NFS: Don't invalidate a submounted dentry in nfs_prime_dcache()
NFSv4: Set a barrier in the update_changeattr() helper
NFS: Fix nfs_post_op_update_inode() to set an attribute barrier
NFS: Remove size hack in nfs_inode_attrs_need_update()
NFSv4: Add attribute update barriers to delegreturn and pNFS layoutcommit
NFS: Add attribute update barriers to NFS writebacks
NFS: Set an attribute barrier on all updates
NFS: Add attribute update barriers to nfs_setattr_update_inode()
...
Pull nfsd fixes from Bruce Fields:
"Three miscellaneous bugfixes, most importantly the clp->cl_revoked
bug, which we've seen several reports of people hitting"
* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
sunrpc: integer underflow in rsc_parse()
nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
svcrpc: fix memory leak in gssp_accept_sec_context_upcall
If we call groups_alloc() with invalid values then it's might lead to
memory corruption. For example, with a negative value then we might not
allocate enough for sizeof(struct group_info).
(We're doing this in the caller for consistency with other callers of
groups_alloc(). The other alternative might be to move the check out of
all the callers into groups_alloc().)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch fixes another sparse fix found by Dan Carpenter's tool.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ooZn
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.0-3' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: RDMA Client Sparse Fix#2
This patch fixes another sparse fix found by Dan Carpenter's tool.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-for-4.0-3' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
xprtrdma: Store RDMA credits in unsigned variables
Dan Carpenter's static checker pointed out:
net/sunrpc/xprtrdma/rpc_rdma.c:879 rpcrdma_reply_handler()
warn: can 'credits' be negative?
"credits" is defined as an int. The credits value comes from the
server as a 32-bit unsigned integer.
A malicious or broken server can plant a large unsigned integer in
that field which would result in an underflow in the following
logic, potentially triggering a deadlock of the mount point by
blocking the client from issuing more RPC requests.
net/sunrpc/xprtrdma/rpc_rdma.c:
876 credits = be32_to_cpu(headerp->rm_credit);
877 if (credits == 0)
878 credits = 1; /* don't deadlock */
879 else if (credits > r_xprt->rx_buf.rb_max_requests)
880 credits = r_xprt->rx_buf.rb_max_requests;
881
882 cwnd = xprt->cwnd;
883 xprt->cwnd = credits << RPC_CWNDSHIFT;
884 if (xprt->cwnd > cwnd)
885 xprt_release_rqst_cong(rqst->rq_task);
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: eba8ff660b ("xprtrdma: Move credit update to RPC . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Merge cleanups requested by Linus.
* cleanups: (3 commits)
pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit
nfs: Can call nfs_clear_page_commit() instead
nfs: Provide and use helper functions for marking a page as unstable
Our UC-KLEE tool found a kernel memory leak of 512 bytes (on x86_64) for
each call to gssp_accept_sec_context_upcall()
(net/sunrpc/auth_gss/gss_rpc_upcall.c). Since it appears that this call
can be triggered by remote connections (at least, from a cursory a
glance at the call chain), it may be exploitable to cause kernel memory
exhaustion. We found the bug in kernel 3.16.3, but it appears to date
back to commit 9dfd87da1a (2013-08-20).
The gssp_accept_sec_context_upcall() function performs a pair of calls
to gssp_alloc_receive_pages() and gssp_free_receive_pages(). The first
allocates memory for arg->pages. The second then frees the pages
pointed to by the arg->pages array, but not the array itself.
Reported-by: David A. Ramos <daramos@stanford.edu>
Fixes: 9dfd87da1a ("rpc: fix huge kmalloc's in gss-proxy”)
Signed-off-by: David A. Ramos <daramos@stanford.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Other code that accesses rq_bc_pa_list holds xprt->bc_pa_lock.
xprt_complete_bc_request() should do the same.
Fixes: 2ea24497a1 ("SUNRPC: RPC callbacks may be split . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull nfsd updates from Bruce Fields:
"The main change is the pNFS block server support from Christoph, which
allows an NFS client connected to shared disk to do block IO to the
shared disk in place of NFS reads and writes. This also requires xfs
patches, which should arrive soon through the xfs tree, barring
unexpected problems. Support for other filesystems is also possible
if there's interest.
Thanks also to Chuck Lever for continuing work to get NFS/RDMA into
shape"
* 'for-3.20' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd: default NFSv4.2 to on
nfsd: pNFS block layout driver
exportfs: add methods for block layout exports
nfsd: add trace events
nfsd: update documentation for pNFS support
nfsd: implement pNFS layout recalls
nfsd: implement pNFS operations
nfsd: make find_any_file available outside nfs4state.c
nfsd: make find/get/put file available outside nfs4state.c
nfsd: make lookup/alloc/unhash_stid available outside nfs4state.c
nfsd: add fh_fsid_match helper
nfsd: move nfsd_fh_match to nfsfh.h
fs: add FL_LAYOUT lease type
fs: track fl_owner for leases
nfs: add LAYOUT_TYPE_MAX enum value
nfsd: factor out a helper to decode nfstime4 values
sunrpc/lockd: fix references to the BKL
nfsd: fix year-2038 nfs4 state problem
svcrdma: Handle additional inline content
svcrdma: Move read list XDR round-up logic
...
xs_tcp_close() is now just a call to xs_tcp_shutdown(), so remove it,
and replace the entry in xs_tcp_ops.
Suggested-by: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Now that the linger code is gone, the xs_tcp_fin_timeout variable has
no real function. Keep it for now, since it is part of the /proc
interface, but only define it if that /proc interface is enabled.
Suggested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the connection reset is due to an active call on our side, then
the state change is sometimes not reported. Catch those instances
using xs_error_report() instead.
Also remove the xs_tcp_shutdown() call in xs_tcp_send_request() as
the change in behaviour makes it redundant.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use of socket shutdown() means that we monitor the shutdown process
through the xs_tcp_state_change() callback, so it is preferable to
a full close in all cases unless we're destroying the transport.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The previous behaviour left the connection half-open in order to try
to scrape the last replies from the socket. Now that we have more reliable
reconnection, change the behaviour to close down the socket faster.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Now that we no longer use the partial shutdown code when closing the
socket, we no longer need to worry about the TCP linger2 state.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead we rely on SO_REUSEPORT to provide the reconnection semantics
that we need for NFSv2/v3.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It is not safe to call xs_reset_transport() from inside xs_udp_setup_socket()
or xs_tcp_setup_socket(), since they do not own the correct locks. Instead,
do it in xs_connect().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The socket lock is currently held by the task that is requesting the
connection be established. While that is efficient in the case where
the connection happens quickly, it is racy in the case where it doesn't.
What we really want is for the connect helper to be able to block access
to the socket while it is being set up.
This patch does so by arranging to transfer the socket lock from the
task that is requesting the connect attempt, and then releasing that
lock once everything is done.
This scheme also gives us automatic protection against collisions with
the RPC close code, so we can kill the cancel_delayed_work_sync()
call in xs_close().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Now that we can reuse bound ports after a close, we never really want to
clear the transport's source port after it has been set. Doing so really
messes up the NFSv3 DRC on the server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Now that we're setting SO_REUSEPORT, we still need to handle the
case where a connect() is attempted, but the old socket is still
lingering.
Essentially, all we want to do here is handle the error by waiting
a few seconds and then retrying.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When using TCP, we need the ability to reuse port numbers after
a disconnection, so that the NFSv3 server knows that we're the same
client. Currently we use a hack to work around the TCP socket's
TIME_WAIT: we send an RST instead of closing, which doesn't
always work...
The SO_REUSEPORT option added in Linux 3.9 allows us to bind multiple
TCP connections to the same source address+port combination, and thus
to use ordinary TCP close() instead of the current hack.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch fixes a sparse warning in the initial submission.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3fRY
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-3.20-part-2' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: RDMA Client Sparse Fixes
This patch fixes a sparse warning in the initial submission.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-for-3.20-part-2' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
xprtrdma: Address sparse complaint in rpcr_to_rdmar()
With "make ARCH=x86_64 allmodconfig make C=1 CF=-D__CHECK_ENDIAN__":
linux-2.6/net/sunrpc/xprtrdma/xprt_rdma.h:273:30: warning: incorrect
type in initializer (different base types)
linux-2.6/net/sunrpc/xprtrdma/xprt_rdma.h:273:30: expected restricted
__be32 [usertype] *buffer
linux-2.6/net/sunrpc/xprtrdma/xprt_rdma.h:273:30: got unsigned int
[usertype] *rq_buffer
As far as I can tell this is a false positive.
Reported-by: kbuild-all@01.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix an Oopsable condition when nsm_mon_unmon is called as part of the
namespace cleanup, which now apparently happens after the utsname
has been freed.
Link: http://lkml.kernel.org/r/20150125220604.090121ae@neptune.home
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable@vger.kernel.org # 3.18
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* flexfiles: (53 commits)
pnfs: lookup new lseg at lseg boundary
nfs41: .init_read and .init_write can be called with valid pg_lseg
pnfs: Update documentation on the Layout Drivers
pnfs/flexfiles: Add the FlexFile Layout Driver
nfs: count DIO good bytes correctly with mirroring
nfs41: wait for LAYOUTRETURN before retrying LAYOUTGET
nfs: add a helper to set NFS_ODIRECT_RESCHED_WRITES to direct writes
nfs41: add NFS_LAYOUT_RETRY_LAYOUTGET to layout header flags
nfs/flexfiles: send layoutreturn before freeing lseg
nfs41: introduce NFS_LAYOUT_RETURN_BEFORE_CLOSE
nfs41: allow async version layoutreturn
nfs41: add range to layoutreturn args
pnfs: allow LD to ask to resend read through pnfs
nfs: add nfs_pgio_current_mirror helper
nfs: only reset desc->pg_mirror_idx when mirroring is supported
nfs41: add a debug warning if we destroy an unempty layout
pnfs: fail comparison when bucket verifier not set
nfs: mirroring support for direct io
nfs: add mirroring support to pgio layer
pnfs: pass ds_commit_idx through the commit path
...
Conflicts:
fs/nfs/pnfs.c
fs/nfs/pnfs.h
Add a call to tally stats for a task under a different statsidx than
what's contained in the task structure.
This is needed to properly account for pnfs reads/writes when the
DS nfs version != the MDS version.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
These patches improve the scalability of the NFSoRDMA client and take large
variables off of the stack. Additionally, the GFP_* flags are updated to
match what TCP uses.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJUy/21AAoJENfLVL+wpUDrDR4QAJ+aZ1LqO5muJG5LDIReh0p+
IyvAO3ekWKaaXZd5e/wOviHRRSBCs3oRBm1sNyjOOZYf7nl67RrndjGq2Ccp6tGw
6V6ligIlhu3QAApFiQmLfpDXQeDBysMfhEQMXDj8kVhAvn3SWwbT6q1Bb8tMZvnu
lwSPYCuLAdtPzDs3j3Pt3jSrOD7gS06Vtumco1yS82YiLK86E7JiOLb9w5Ltk0Wo
DT9hZ7JXtflBy3trBsNYQ7GTjoYEp792Ca9DT/nie8/Tuuy3DhooLJKdwVErq/0/
ycI033mw//RneY+/eF2wLeS4PlzaiSq7DmXKpE5MnkpVuNAdPbHbCuVzuXa4/LLD
NhKyw/NTAE9ucFJ8e3apj3m42O00bMV0rx0rOUvMMdbNPBKzXk3rrb4uRYfT4k+D
yss7aEZg0EcDbe9KqfuDdwXVJIZnvAvXD+V1iL4X3QmVM0JyJZouNZPoG7fCwA1g
uoqGJK9zu7osr59YMomf2okWQFUQYCea5ombXYOo3ZtANw+OYaHDcMKTXaiCtMdA
CZUEOND8mB/EFtgTMA2TZmDzch8iOOuD7wmtifb8h1DqN/3GxgecBcT5XMCx5zDR
bMpt9vbCfe4YP6idpl5XEnVbcPG9CZF2W2Hg2gI7axX8R+ZMvwQQlWJjOqxoR6+F
bpD/jjWFYaS6U7NGyylM
=YCZe
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-3.20' of git://git.linux-nfs.org/projects/anna/nfs-rdma
NFS: Client side changes for RDMA
These patches improve the scalability of the NFSoRDMA client and take large
variables off of the stack. Additionally, the GFP_* flags are updated to
match what TCP uses.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-for-3.20' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (21 commits)
xprtrdma: Update the GFP flags used in xprt_rdma_allocate()
xprtrdma: Clean up after adding regbuf management
xprtrdma: Allocate zero pad separately from rpcrdma_buffer
xprtrdma: Allocate RPC/RDMA receive buffer separately from struct rpcrdma_rep
xprtrdma: Allocate RPC/RDMA send buffer separately from struct rpcrdma_req
xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_req
xprtrdma: Add struct rpcrdma_regbuf and helpers
xprtrdma: Refactor rpcrdma_buffer_create() and rpcrdma_buffer_destroy()
xprtrdma: Simplify synopsis of rpcrdma_buffer_create()
xprtrdma: Take struct ib_qp_attr and ib_qp_init_attr off the stack
xprtrdma: Take struct ib_device_attr off the stack
xprtrdma: Free the pd if ib_query_qp() fails
xprtrdma: Remove rpcrdma_ep::rep_func and ::rep_xprt
xprtrdma: Move credit update to RPC reply handler
xprtrdma: Remove rl_mr field, and the mr_chunk union
xprtrdma: Remove rpcrdma_ep::rep_ia
xprtrdma: Rename "xprt" and "rdma_connect" fields in struct rpcrdma_xprt
xprtrdma: Clean up hdrlen
xprtrdma: Display XIDs in host byte order
xprtrdma: Modernize htonl and ntohl
...
Reflect the more conservative approach used in the socket transport's
version of this transport method. An RPC buffer allocation should
avoid forcing not just FS activity, but any I/O.
In particular, two recent changes missed updating xprtrdma:
- Commit c6c8fe79a8 ("net, sunrpc: suppress allocation warning ...")
- Commit a564b8f039 ("nfs: enable swap on NFS")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_{de}register_internal() are used only in verbs.c now.
MAX_RPCRDMAHDR is no longer used and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use the new rpcrdma_alloc_regbuf() API to shrink the amount of
contiguous memory needed for a buffer pool by moving the zero
pad buffer into a regbuf.
This is for consistency with the other uses of internally
registered memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The rr_base field is currently the buffer where RPC replies land.
An RPC/RDMA reply header lands in this buffer. In some cases an RPC
reply header also lands in this buffer, just after the RPC/RDMA
header.
The inline threshold is an agreed-on size limit for RDMA SEND
operations that pass from server and client. The sum of the
RPC/RDMA reply header size and the RPC reply header size must be
less than this threshold.
The largest RDMA RECV that the client should have to handle is the
size of the inline threshold. The receive buffer should thus be the
size of the inline threshold, and not related to RPCRDMA_MAX_SEGS.
RPC replies received via RDMA WRITE (long replies) are caught in
rq_rcv_buf, which is the second half of the RPC send buffer. Ie,
such replies are not involved in any way with rr_base.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The rl_base field is currently the buffer where each RPC/RDMA call
header is built.
The inline threshold is an agreed-on size limit to for RDMA SEND
operations that pass between client and server. The sum of the
RPC/RDMA header size and the RPC header size must be less than or
equal to this threshold.
Increasing the r/wsize maximum will require MAX_SEGS to grow
significantly, but the inline threshold size won't change (both
sides agree on it). The server's inline threshold doesn't change.
Since an RPC/RDMA header can never be larger than the inline
threshold, make all RPC/RDMA header buffers the size of the
inline threshold.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Because internal memory registration is an expensive and synchronous
operation, xprtrdma pre-registers send and receive buffers at mount
time, and then re-uses them for each RPC.
A "hardway" allocation is a memory allocation and registration that
replaces a send buffer during the processing of an RPC. Hardway must
be done if the RPC send buffer is too small to accommodate an RPC's
call and reply headers.
For xprtrdma, each RPC send buffer is currently part of struct
rpcrdma_req so that xprt_rdma_free(), which is passed nothing but
the address of an RPC send buffer, can find its matching struct
rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof.
That means that hardway currently has to replace a whole rpcrmda_req
when it replaces an RPC send buffer. This is often a fairly hefty
chunk of contiguous memory due to the size of the rl_segments array
and the fact that both the send and receive buffers are part of
struct rpcrdma_req.
Some obscure re-use of fields in rpcrdma_req is done so that
xprt_rdma_free() can detect replaced rpcrdma_req structs, and
restore the original.
This commit breaks apart the RPC send buffer and struct rpcrdma_req
so that increasing the size of the rl_segments array does not change
the alignment of each RPC send buffer. (Increasing rl_segments is
needed to bump up the maximum r/wsize for NFS/RDMA).
This change opens up some interesting possibilities for improving
the design of xprt_rdma_allocate().
xprt_rdma_allocate() is now the one place where RPC send buffers
are allocated or re-allocated, and they are now always left in place
by xprt_rdma_free().
A large re-allocation that includes both the rl_segments array and
the RPC send buffer is no longer needed. Send buffer re-allocation
becomes quite rare. Good send buffer alignment is guaranteed no
matter what the size of the rl_segments array is.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are several spots that allocate a buffer via kmalloc (usually
contiguously with another data structure) and then register that
buffer internally. I'd like to split the buffers out of these data
structures to allow the data structures to scale.
Start by adding functions that can kmalloc and register a buffer,
and can manage/preserve the buffer's associated ib_sge and ib_mr
fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the details of how to create and destroy rpcrdma_req and
rpcrdma_rep structures into helper functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: There is one call site for rpcrdma_buffer_create(). All of
the arguments there are fields of an rpcrdma_xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reduce stack footprint of the connection upcall handler function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Device attributes are large, and are used in more than one place.
Stash a copy in dynamically allocated memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If ib_query_qp() fails or the memory registration mode isn't
supported, don't leak the PD. An orphaned IB/core resource will
cause IB module removal to hang.
Fixes: bd7ed1d133 ("RPC/RDMA: check selected memory registration ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The rep_func field always refers to rpcrdma_conn_func().
rep_func should have been removed by commit b45ccfd25d ("xprtrdma:
Remove MEMWINDOWS registration modes").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reduce work in the receive CQ handler, which can be run at hardware
interrupt level, by moving the RPC/RDMA credit update logic to the
RPC reply handler.
This has some additional benefits: More header sanity checking is
done before trusting the incoming credit value, and the receive CQ
handler no longer touches the RPC/RDMA header (the CPU stalls while
waiting for the header contents to be brought into the cache).
This further extends work begun by commit e7ce710a88 ("xprtrdma:
Avoid deadlock when credit window is reset").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Since commit 0ac531c183 ("xprtrdma: Remove REGISTER
memory registration mode"), the rl_mr pointer is no longer used
anywhere.
After removal, there's only a single member of the mr_chunk union,
so mr_chunk can be removed as well, in favor of a single pointer
field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This field is not used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Use consistent field names in struct rpcrdma_xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace naked integers with a documenting macro.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtsock.c and the backchannel code display XIDs in host byte order.
Follow suit in xprtrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace htonl and ntohl with the be32 equivalents.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make it easier to grep the system log for specific error conditions.
The wc.opcode field is not included because opcode numbers are
sparse, and because wc.opcode is not necessarily valid when
completion reports an error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Increase the concurrency level for rpciod threads to allow for allocations
etc that happen in the RPCSEC_GSS layer. Also note that the NFSv4 byte range
locks may now need to allocate memory from inside rpciod.
Add the WQ_HIGHPRI flag to improve latency guarantees while we're at it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Most NFS RPCs place their large payload argument at the end of the
RPC header (eg, NFSv3 WRITE). For NFSv3 WRITE and SYMLINK, RPC/RDMA
sends the complete RPC header inline, and the payload argument in
the read list. Data in the read list is the last part of the XDR
stream.
One important case is not like this, however. NFSv4 COMPOUND is a
counted array of operations. A WRITE operation, with its large data
payload, can appear in the middle of the compound's operations
array. Thus NFSv4 WRITE compounds can have header content after the
WRITE payload.
The Linux client, for example, performs an NFSv4 WRITE like this:
{ PUTFH, WRITE, GETATTR }
Though RFC 5667 is not precise about this, the proper way to convey
this compound is to place the GETATTR inline, _after_ the front of
the RPC header. The receiver inserts the read list payload into the
XDR stream after the initial WRITE arguments, and before the GETATTR
operation, thanks to the value of the read list "position" field.
The Linux client currently sends the GETATTR at the end of the
RPC/RDMA read list, which is incorrect. It will be corrected in the
future.
The Linux server currently rejects NFSv4 compounds with inline
content after the read list. For the above NFSv4 WRITE compound, the
NFS compound header indicates there are three operations, but the
server finds nonsense when it looks in the XDR stream for the third
operation, and the compound fails with OP_ILLEGAL.
Move trailing inline content to the end of the XDR buffer's page
list. This presents incoming NFSv4 WRITE compounds to NFSD in the
same way the socket transport does.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trond Myklebust