Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just one change for 4.21:
- Update comments for name change or32 -> or1k from Geert Uytterhoeven
-----BEGIN PGP SIGNATURE-----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=bY+D
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC update from Stafford Horne:
"Just one change for 4.21: Update comments for name change or32 -> or1k
from Geert Uytterhoeven"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix broken paths to arch/or32
If we want to map memory from the DMA allocator to userspace it must be
zeroed at allocation time to prevent stale data leaks. We already do
this on most common architectures, but some architectures don't do this
yet, fix them up, either by passing GFP_ZERO when we use the normal page
allocator or doing a manual memset otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Sam Ravnborg <sam@ravnborg.org> [sparc]
OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".
This also fixes a leaked reference for cpus node.
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Just one change for 4.19:
- Refactors from Christoph Hellwig to use generic DMA facilities
-----BEGIN PGP SIGNATURE-----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=C60y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC update from Stafford Horne:
"Just one change for 4.19: refactoring from Christoph Hellwig to use
generic DMA facilities"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: use generic dma_noncoherent_ops
openrisc: fix cache maintainance the the sync_single_for_device DMA operation
openrisc: remove the no-op unmap_page and unmap_sg DMA operations
openrisc: remove the sync_single_for_cpu DMA operation
- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
-----BEGIN PGP SIGNATURE-----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=gKw8
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- GICv3 ITS LPI allocation revamp
- GICv3 support for hypervisor-enforced LPI range
- GICv3 ITS conversion to raw spinlock
Switch to the generic noncoherent direct mapping implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The cache maintaince in the sync_single_for_device operation should be
equivalent to the map_page operation to facilitate reusing buffers. Fix the
openrisc implementation by moving the cache maintaince performed in map_page
into the sync_single method, and calling that from map_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
openrisc does all the required cache maintainance at dma map time, and none
at unmap time. It thus has to implement sync_single_for_device to match
the map cace for buffer reuse, but there is no point in doing another
invalidation in the sync_single_cpu_case, which in terms of cache
maintainance is equivalent to the unmap case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Originally in patch e6d20c55a4 ("openrisc: entry: Fix delay slot
detection") I fixed delay slot detection, but only for QEMU. We missed
that hardware delay slot detection using delay slot exception flag (DSX)
was still broken. This was because QEMU set the DSX flag in both
pre-exception supervision register (ESR) and supervision register (SR)
register, but on real hardware the DSX flag is only set on the SR
register during exceptions.
Fix this by carrying the DSX flag into the SR register during exception.
We also update the DSX flag read locations to read the value from the SR
register not the pt_regs SR register which represents ESR. The ESR
should never have the DSX flag set.
In the process I updated/removed a few comments to match the current
state. Including removing a comment saying that the DSX detection logic
was inefficient and needed to be rewritten.
I have tested this on QEMU with a patch ensuring it matches the hardware
specification.
Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html
Fixes: e6d20c55a4 ("openrisc: entry: Fix delay slot detection")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
Most mainstream architectures are using 65536 entries, so lets stick to
that. If someone is really desperate to override it that can still be
done through <asm/dma-mapping.h>, but I'd rather see a really good
rationale for that.
dma_debug_init is now called as a core_initcall, which for many
architectures means much earlier, and provides dma-debug functionality
earlier in the boot process. This should be safe as it only relies
on the memory allocator already being available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.
Simplify this process by using the helper force_sig_fault. Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.
In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.
Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.
The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.
In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.
Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull printk updates from Petr Mladek:
- Add a console_msg_format command line option:
The value "default" keeps the old "[time stamp] text\n" format. The
value "syslog" allows to see the syslog-like "<log
level>[timestamp] text" format.
This feature was requested by people doing regression tests, for
example, 0day robot. They want to have both filtered and full logs
at hands.
- Reduce the risk of softlockup:
Pass the console owner in a busy loop.
This is a new approach to the old problem. It was first proposed by
Steven Rostedt on Kernel Summit 2017. It marks a context in which
the console_lock owner calls console drivers and could not sleep.
On the other side, printk() callers could detect this state and use
a busy wait instead of a simple console_trylock(). Finally, the
console_lock owner checks if there is a busy waiter at the end of
the special context and eventually passes the console_lock to the
waiter.
The hand-off works surprisingly well and helps in many situations.
Well, there is still a possibility of the softlockup, for example,
when the flood of messages stops and the last owner still has too
much to flush.
There is increasing number of people having problems with
printk-related softlockups. We might eventually need to get better
solution. Anyway, this looks like a good start and promising
direction.
- Do not allow to schedule in console_unlock() called from printk():
This reverts an older controversial commit. The reschedule helped
to avoid softlockups. But it also slowed down the console output.
This patch is obsoleted by the new console waiter logic described
above. In fact, the reschedule made the hand-off less effective.
- Deprecate "%pf" and "%pF" format specifier:
It was needed on ia64, ppc64 and parisc64 to dereference function
descriptors and show the real function address. It is done
transparently by "%ps" and "pS" format specifier now.
Sergey Senozhatsky found that all the function descriptors were in
a special elf section and could be easily detected.
- Remove printk_symbol() API:
It has been obsoleted by "%pS" format specifier, and this change
helped to remove few continuous lines and a less intuitive old API.
- Remove redundant memsets:
Sergey removed unnecessary memset when processing printk.devkmsg
command line option.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits)
printk: drop redundant devkmsg_log_str memsets
printk: Never set console_may_schedule in console_trylock()
printk: Hide console waiter logic into helpers
printk: Add console owner and waiter logic to load balance console writes
kallsyms: remove print_symbol() function
checkpatch: add pF/pf deprecation warning
symbol lookup: introduce dereference_symbol_descriptor()
parisc64: Add .opd based function descriptor dereference
powerpc64: Add .opd based function descriptor dereference
ia64: Add .opd based function descriptor dereference
sections: split dereference_function_descriptor()
openrisc: Fix conflicting types for _exext and _stext
lib: do not use print_symbol()
irq debug: do not use print_symbol()
sysfs: do not use print_symbol()
drivers: do not use print_symbol()
x86: do not use print_symbol()
unicore32: do not use print_symbol()
sh: do not use print_symbol()
mn10300: do not use print_symbol()
...
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong. A comment about an
si_code set above when actually si_code is never set. Leading to a
random si_code being sent to userspace in the event of an unaligned
access.
Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.
Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.
Cc: stable@vger.kernel.org
Fixes: 769a8a9622 ("OpenRISC: Traps")
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Make THREAD_SIZE available to vmlinux.lds on openrisc by including
asm/thread_info.h the linker script.
This allows init_stack to be allocated in the linker script in a subsequent
patch.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Stafford Horne <shorne@gmail.com>
cc: Jonas Bonn <jonas@southpole.se>
cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
cc: openrisc@lists.librecores.org
The printk tree in linux-next has a patch "symbol lookup: introduce
dereference_symbol_descriptor()" that includes sections.h in kallsyms.h,
so arch/openrisc/kernel/traps.c gets a second extern definition for
_etext and _stext.
Remove the local definitions and include sections.h directly in
preparation for the kallsyms.h change.
This fixes the following (future) build error:
CC arch/openrisc/kernel/traps.o
arch/openrisc/kernel/traps.c:43:13: error: conflicting types for ‘_etext’
extern char _etext, _stext;
^
In file included from ./arch/openrisc/include/generated/asm/sections.h:1:0,
from ./include/linux/kallsyms.h:15,
from arch/openrisc/kernel/traps.c:35:
./include/asm-generic/sections.h:35:32: note: previous declaration of ‘_etext’ was here
extern char _text[], _stext[], _etext[];
^
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as true"
get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of the
necessary data-structures to be per-cpu.
- The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push it
together with these patches.
-----BEGIN PGP SIGNATURE-----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=euP7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The OpenRISC work is a bit more interesting this time, adding SMP
support and a few general cleanups.
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as
true" get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of
the necessary data-structures to be per-cpu.
The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push
it together with these patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: fix possible deadlock scenario during timer sync
openrisc: pass endianness info to sparse
openrisc: add tick timer multi-core sync logic
openrisc: enable LOCKDEP_SUPPORT and irqflags tracing
openrisc: support framepointers and STACKTRACE_SUPPORT
openrisc: add simple_smp dts and defconfig for simulators
openrisc: add cacheflush support to fix icache aliasing
openrisc: sleep instead of spin on secondary wait
openrisc: fix initial preempt state for secondary cpu tasks
openrisc: initial SMP support
irqchip: add initial support for ompic
dt-bindings: add openrisc to vendor prefixes list
openrisc: use qspinlocks and qrwlocks
openrisc: add 1 and 2 byte cmpxchg support
openrisc: use shadow registers to save regs on exception
dt-bindings: openrisc: Add OpenRISC platform SoC
Documentation: openrisc: Updates to README
Documentation: Move OpenRISC docs out of arch/
MAINTAINERS: Add OpenRISC pic maintainer
openrisc: dts: or1ksim: Add stdout-path
OpenRISC borrows its timer sync logic from MIPS, Matt helped to review
the OpenRISC implementation and noted that we may suffer the same
deadlock case that MIPS has faced. The case being:
"the MIPS timer synchronization code contained the possibility of
deadlock. If you mark a CPU online before it goes into the synchronize
loop, then the boot CPU can schedule a different thread and send IPIs to
all "online" CPUs. It gets stuck waiting for the secondary to ack it's
IPI, since this secondary CPU has not enabled IRQs yet, and is stuck
waiting for the master to synchronise with it. The system then
deadlocks."
Fix this by moving set_cpu_online() to after timer sync.
Reported-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
In case timers are not in sync when cpus start (i.e. hot plug / offset
resets) we need to synchronize the secondary cpus internal timer with
the main cpu. This is needed as in OpenRISC SMP there is only one
clocksource registered which reads from the same ttcr register on each
cpu.
This synchronization routine heavily borrows from mips implementation that
does something similar.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Lockdep is needed for proving the spinlocks and rwlocks work fine on our
platform. It also requires calling the trace_hardirqs_off() and
trace_hardirqs_on() pair of routines when entering and exiting an
interrupt.
For OpenRISC the interrupt stack frame does not support frame pointers,
so to call trace_hardirqs_on() and trace_hardirqs_off() here the macro's
build up a stack frame each time.
There is one necessary small change in _sys_call_handler to move
interrupt enabling later so they can get re-enabled during syscall
restart. This was done to fix lockdep warnings that are now possible due
to this
patch.
Signed-off-by: Stafford Horne <shorne@gmail.com>
For lockdep support a reliable stack trace mechanism is needed. This
patch adds support in OpenRISC for the stacktrace framework, implemented
by a simple unwinder api. The unwinder api supports both framepointer
and basic stack tracing.
The unwinder is now used to replace the stack_dump() implementation as
well. The new traces are inline with other architectures trace format:
Call trace:
[<c0004448>] show_stack+0x3c/0x58
[<c031c940>] dump_stack+0xa8/0xe4
[<c0008104>] __cpu_up+0x64/0x130
[<c000d268>] bringup_cpu+0x3c/0x178
[<c000d038>] cpuhp_invoke_callback+0xa8/0x1fc
[<c000d680>] cpuhp_up_callbacks+0x44/0x14c
[<c000e400>] cpu_up+0x14c/0x1bc
[<c041da60>] smp_init+0x104/0x15c
[<c033843c>] ? kernel_init+0x0/0x140
[<c0415e04>] kernel_init_freeable+0xbc/0x25c
[<c033843c>] ? kernel_init+0x0/0x140
[<c0338458>] kernel_init+0x1c/0x140
[<c003a174>] ? schedule_tail+0x18/0xa0
[<c0006b80>] ret_from_fork+0x1c/0x9c
Signed-off-by: Stafford Horne <shorne@gmail.com>
On OpenRISC the icache does not snoop data stores. This can cause
aliasing as reported by Jan. This patch fixes the issue to ensure icache
is properly synchronized when code is written to memory. It supports both
SMP and UP flushing.
This supports dcache flush as well for architectures that do not support
write-through caches; most OpenRISC implementations do implement
write-through cache however. Dcache flushes are done only on a single
core as OpenRISC dcaches all support snooping of bus stores.
Signed-off-by: Jan Henrik Weinstock <jan.weinstock@ice.rwth-aachen.de>
[shorne@gmail.com: Squashed patches and wrote commit message]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Currently we do a spin on secondary cpus when waiting to boot. This
theoretically causes issues with power consumption and does cause issues
with qemu cycle burning (it starves cpu 0 from actually being able to
boot.)
This change puts each secondary cpu to sleep if they have a power
management unit, then signals them to wake via IPI when its time to boot.
If the cpus have no power management unit they will loop as before.
Note: The wakeup IPI requires a special interrupt handler as on secondary
cpu's the interrupt infrastructure is not yet established. This
interrupt handler is set and reset by updating SPR_EVBAR.
Signed-off-by: Stafford Horne <shorne@gmail.com>
During SMP testing we were getting the below warning after booting the
secondary cpu:
[ 0.060000] BUG: scheduling while atomic: swapper/1/0/0x00000000
This change follows similar patterns from other architectures to start
the schduler with preempt disabled.
Signed-off-by: Stafford Horne <shorne@gmail.com>
This patch introduces the SMP support for the OpenRISC architecture.
The SMP architecture requires cores which have multi-core features which
have been introduced a few years back including:
- New SPRS SPR_COREID SPR_NUMCORES
- Shadow SPRs
- Atomic Instructions
- Cache Coherency
- A wired in IPI controller
This patch adds all of the SMP specific changes to core infrastructure,
it looks big but it needs to go all together as its hard to split this
one up.
Boot loader spinning of second cpu is not supported yet, it's assumed
that Linux is booted straight after cpu reset.
The bulk of these changes are trivial changes to refactor to use per cpu
data structures throughout. The addition of the smp.c and changes in
time.c are the changes. Some specific notes:
MM changes
----------
The reason why this is created as an array, and not with DEFINE_PER_CPU
is that doing it this way, we'll save a load in the tlb-miss handler
(the load from __per_cpu_offset).
TLB Flush
---------
The SMP implementation of flush_tlb_* works by sending out a
function-call IPI to all the non-local cpus by using the generic
on_each_cpu() function.
Currently, all flush_tlb_* functions will result in a flush_tlb_all(),
which has always been the behaviour in the UP case.
CPU INFO
--------
This creates a per cpu cpuinfo struct and fills it out accordingly for
each activated cpu. show_cpuinfo is also updated to reflect new version
information in later versions of the spec.
SMP API
-------
This imitates the arm64 implementation by having a smp_cross_call
callback that can be set by set_smp_cross_call to initiate an IPI and a
handle_IPI function that is expected to be called from an IPI irqchip
driver.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
[shorne@gmail.com: added cpu stop, checkpatch fixes, wrote commit message]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Previously, the area between 0x0-0x100 have been used as a "scratch"
memory area to temporarily store regs during exception entry. In a
multi-core environment, this will not work.
This change is to use shadow registers for nested context.
Currently only the "critical" temp load/stores are covered, the
EMERGENCY_PRINT ones are left as is (when they are used, it's game over
anyway), they need to be handled as well in the future.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=aihT
-----END PGP SIGNATURE-----
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Openrisc fixes for this 4.13 merge window, there is not really much
here:
- include cleanups, one with should reduce build time slightly
- switch to new toolchain to new (>2 year old) toolchain prefix"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
openrisc: defconfig: Cleanup from old Kconfig options
openrisc: explicitly include linux/bug.h in asm/fixmap.h
openrisc: Switch to use export.h instead of module.h
openrisc: Change toolchain from or32- to or1k-
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d55977 ("sched/core: Remove pointless printout in
sched_show_task()"). Remove the implementations as well.
Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a regression in commit 4d6501dce0 where I didn't notice
that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to
NULL after our initialisation in copy_process().
We can simply get rid of the arch-specific initialisation here since it
is now always done in copy_process() before hitting copy_thread{,_tls}().
Review notes:
- As far as I can tell, copy_process() is the only user of
copy_thread_tls(), which is the only caller of copy_thread() for
architectures that don't implement copy_thread_tls().
- After this patch, there is no arch-specific code touching
p->set_child_tid or p->clear_child_tid whatsoever.
- It may look like MIPS/OpenRISC wanted to always have these fields be
NULL, but that's not true, as copy_process() would unconditionally
set them again _after_ calling copy_thread_tls() before commit
4d6501dce0.
Fixes: 4d6501dce0 ("kthread: Fix use-after-free if kthread fork fails")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce dependencies on module.h since all we need here is export.h
for EXPORT_SYMBOL.
Fixes: f50169324d ("module.h: split out the EXPORT_SYMBOL into export.h")
Signed-off-by: Stafford Horne <shorne@gmail.com>
But first update the usage sites with the new header dependency.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix typos and add the following to the scripts/spelling.txt:
efective||effective
While we are here, fix the "addres" as well in the touched line in
arch/openrisc/kernel/entry.S.
Link: http://lkml.kernel.org/r/1481573103-11329-10-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
aligment||alignment
I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.
I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif. It is surely safe and I
confirmed "_alignment_handler" is correct.
I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.
Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
-----BEGIN PGP SIGNATURE-----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=wmBO
-----END PGP SIGNATURE-----
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Highlights include:
- optimized memset and memcpy routines, ~20% boot time saving
- support for cpu idling
- adding support for l.swa and l.lwa atomic operations (in spec from
2014)
- use atomics to implement: bitops, cmpxchg, futex
- the atomics are in preparation for SMP support"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits)
openrisc: head: Init r0 to 0 on start
openrisc: Export ioremap symbols used by modules
arch/openrisc/lib/memcpy.c: use correct OR1200 option
openrisc: head: Remove unused strings
openrisc: head: Move init strings to rodata section
openrisc: entry: Fix delay slot detection
openrisc: entry: Whitespace and comment cleanups
scripts/checkstack.pl: Add openrisc support
MAINTAINERS: Add the openrisc official repository
openrisc: Add .gitignore
openrisc: Add optimized memcpy routine
openrisc: Add optimized memset
openrisc: Initial support for the idle state
openrisc: Fix the bitmask for the unit present register
openrisc: remove unnecessary stddef.h include
openrisc: add futex_atomic_* implementations
openrisc: add optimized atomic operations
openrisc: add cmpxchg and xchg implementations
openrisc: add atomic bitops
openrisc: add l.lwa/l.swa emulation
...
Originally openrisc spec 0 specified that r0 would be wired to ground.
This is no longer the case. r0 is not guaranteed to be 0 at init, so we
need to initialize it to 0 before using it.
Also, if we are clearing r0 we cant use r0 to clear itself. Change the
the CLEAR_GPR macro to use movhi for clearing.
Reported-by: Jakob Viketoft <jakob.viketoft@aacmicrotec.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
These string definitions are no longer used removed them. Noticed this
while working on a CONFIG_DEBUG_INFO build issue.
Signed-off-by: Stafford Horne <shorne@gmail.com>
The strings used during the head/init phase of openrisc bootup were
stored in the executable section of the binary.
This causes compilation to fail when using CONFIG_DEBUG_INFO with
error:
Error: unaligned opcodes detected in executable segment
Signed-off-by: Stafford Horne <shorne@gmail.com>
Linus Torvalds