Commit Graph

12465 Commits

Author SHA1 Message Date
Vincent Sanders 7aa0b0d5ab [PATCH] ARM: 2707/2: Fix badge4 CPU Frequency build faliure
Patch from Vincent Sanders

This fixes the "multiple definitions of cpufreq_get" build faliure on
the Badge4 SA1100 platform.

Signed-off-by: Vincent Sanders
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-09 21:59:21 +01:00
Dave Neuer 12035d6456 [PATCH] ARM: 2706/1: Fix compile on SA-based iPAQs and remove stale CREDITS info
Patch from Dave Neuer

This fixes the "multiple definitions of cpufreq_get" errors on
StrongARM-based iPAQs.

Signed-off-by: Dave Neuer
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-09 17:40:55 +01:00
Russell King 4e71e47da3 [PATCH] ARM: Remove zero-byte sized file
Remove the remaining zero byte file left over from the Xscale
fixes.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-06-09 16:53:28 +01:00
Nicolas Pitre dcef1f6346 [PATCH] ARM: 2664/2: add support for atomic ops on pre-ARMv6 SMP systems
Patch from Nicolas Pitre

Not that there might be many of them on the planet, but at least RMK
apparently has one.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-08 19:00:47 +01:00
Nicolas Pitre aeabbbbe12 [PATCH] ARM: 2705/1: fix writesw for misaligned source pointer
Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-08 19:00:16 +01:00
Russell King f8f98a9335 [PATCH] ARM: Fix Xscale copy_page implementation
The ARM copypage changes in 2.6.12-rc4-git1 removed the preempt locking
from the copypage functions which broke the XScale implementation.
This patch fixes the locking on XScale and removes the now unneeded
minicache code.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Checked-by: Richard Purdie
2005-06-08 15:28:24 +01:00
Deepak Saxena 17d82fcc6a [PATCH] ARM: 2700/1: Disable IXP2000 IRQs at bootup
Patch from Deepak Saxena

The IXDP2800 bootloader does not disable IRQs before jumping into
the kernel and this is causing the Grand Unified KGDB to crash
the system when we do an early call to trap_init() and irq handlers
have not yet been registered. This patch disables IRQs before we
jump into the kernel.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-03 22:18:52 +01:00
Todd Poynor 8775420d2f [PATCH] ARM: 2691/1: PXA27x sleep fixes take 2
Patch from Todd Poynor

PXA27x sleep fixes:
* set additional sleep/wakeup registers for Mainstone boards.
* move CKEN=0 to pxa25x-specific code; that value is harmful on pxa27x.
* save/restore additional registers, including some found necessary for
C5 processors and/or newer blob versions.
* enable future support of additional sleep modes for PXA27x (eg,
standby, deep sleep).
* split off cpu-specific sleep processing between pxa27x and pxa25x into
separate files (partly in preparation for additional sleep modes).
Includes fixes from David Burrage.

Signed-off-by: Todd Poynor
Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-03 20:52:27 +01:00
Albrecht Dre 105bb2698b [PATCH] ARM: 2694/1: [s3c2410/dma] release irq properly to fix kernel oops
Patch from Albrecht Dre

Problem:
When a module requests a DMA channel via the function s3c2410_dma_request(), this function requests the appropriate irq under the name of the client module. When the client module is unloaded, it calls s3c2410_dma_free() which does not free the irq. Consequently, when e.g. running "cat /proc/interrupts", the irq owner points to freed memory, leading to a kernel oops.
File:
linux/arch/arm/mach-s3c2410/dma.c
Fix:
trivial, below

Signed-off-by: Albrecht Dre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-03 20:52:26 +01:00
Russell King ccea7a19e5 [PATCH] ARM SMP: Fix vector entry
The current vector entry system does not allow for SMP.  In
order to work around this, we need to eliminate our reliance
on the fixed save areas, which breaks the way we enable
alignment traps.  This patch changes the way we handle the
save areas such that we can have one per CPU.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-31 22:22:32 +01:00
Russell King 49f680ea7b [PATCH] ARM SMP: convert alignment enable
The current vector entry system does not allow for SMP.  In
order to work around this, we need to eliminate our reliance
on the fixed save areas, which breaks the way we enable
alignment traps.  This patch makes the alignment trap enable
code independent of the way we handle the save areas.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-31 18:02:00 +01:00
Russell King 791be9b976 [PATCH] ARM SMP: add IPI support
Add support for inter-processor interrupts to the main IRQ
handling code.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-21 18:16:44 +01:00
Russell King 706fdd9faa [PATCH] ARM SMP: reallocate main IRQ handler code registers
By changing r9 -> r8 and r8 to 'tsk' (r9) we are able to remove
one instruction from the preempt path.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-21 18:15:45 +01:00
Russell King 187a51ad11 [PATCH] ARM SMP: consolidate main IRQ handler code
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-21 18:14:44 +01:00
Russell King 8711a1b902 [PATCH] ARM: Fix build error
Mainline kernels don't have VECTORS_HIGH nor COPYPAGE_MINICACHE yet.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-16 23:36:22 +01:00
Ben Dooks bfd4e0709f [PATCH] ARM: 2678/1: S3C2440 - cpu fixes, hdiv divisors and nand dev name
Patch from Ben Dooks

Fix the setting of hdiv when set to divide-by-2. Thanks to
Jeonghoon Yoon for pointing this out.
Change name of the NAND device to "s3c2440-nand" as it
is not similar enough to the "s3c2410-nand" device.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-12 19:27:14 +01:00
Ben Dooks 4ad3a443c9 [PATCH] ARM: 2677/1: S3C2440 - UPLL frequency doubled
Patch from Ben Dooks

S3C2440 UPLL is the same as the S3C2410 UPLL, it is only the
MPLL which has an extra multiplication factor of 2 in the
multiplier.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-12 19:27:13 +01:00
Nicolas Pitre 70489c88d0 [PATCH] ARM: 2680/1: refine TLS reg availability some more again
Patch from Nicolas Pitre

Not all ARMv6 processors implement the TLS register.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-12 19:27:12 +01:00
Nicolas Pitre fa4354359f [PATCH] ARM: 2663/2: I can't type
Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-10 17:36:29 +01:00
Russell King 8d802d28c2 [PATCH] ARM: Add V6 aliasing cache flush
Add cache flushing support for aliased V6 caches to
flush_dcache_page.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-10 17:31:43 +01:00
Russell King 08ee4e4c5f [PATCH] ARM: Use top_pmd for V6 copy/clear user_page
Remove needless page table walking for v6 page operations.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-10 17:30:47 +01:00
Russell King d2bab05ac1 [PATCH] ARM: Move copy/clear user_page locking into implementation
Move the locking for copy_user_page() and clear_user_page() into
the implementations which require locking.  For simple memcpy/
memset based implementations, the locking is extra overhead which
is not necessary, and prevents preemption occuring.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-10 14:23:01 +01:00
Russell King c4e1f6f6bf [PATCH] ARM: Add top_pmd, which points at the top-most page table
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-10 10:40:19 +01:00
Russell King 155bb14482 [PATCH] ARM: Add inline functions to find the pmd from virtual address
Add pmd_off() and pmd_off_k() to obtain the pmd pointer for a
virtual address, and use them throughout the mm initialisation.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-09 20:52:51 +01:00
Nicolas Pitre 41e46d6ab0 [PATCH] ARM: 2665/1: kill warnings in entry-armv.S
Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-05 23:24:45 +01:00
Nicolas Pitre 4b0e07a556 [PATCH] ARM: 2663/1: straightify TLS register emulation a bit more
Patch from Nicolas Pitre

This better express things, and should cover RMK's weird SMP toys.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-05 23:24:45 +01:00
Russell King f7e68bbf40 [PATCH] ARM: select PCI, ISA and ISA_DMA
Rather than using a long "depends on..." and "default y" lines for
these options, use select instead.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-05 14:49:01 +01:00
Russell King 4f7a18124c [PATCH] ARM: Fix kernel stack offset calculations
Various places in the ARM kernel implicitly assumed that kernel
stacks are always 8K due to hard coded constants.  Replace these
constants with definitions.

Correct the allowable range of kernel stack pointer values within
the allocation.  Arrange for the entire kernel stack to be zeroed,
not just the upper 4K if CONFIG_DEBUG_STACK_USAGE is set.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-05 13:11:00 +01:00
Al Viro 5cae841b13 [PATCH] ISA DMA Kconfig fixes - part 1
A bunch of drivers use ISA DMA helpers or their equivalents for
platforms that have ISA with different DMA controller (a lot of ARM
boxen).  Currently there is no way to put such dependency in Kconfig -
CONFIG_ISA is not it (e.g.  it is not set on platforms that have no ISA
slots, but have on-board devices that pretend to be ISA ones).

New symbol added - ISA_DMA_API.  Set when we have functional
enable_dma()/set_dma_mode()/etc.  set of helpers.  Next patches in the
series will add missing dependencies for drivers that need them.

I'm very carefully staying the hell out of the recurring flamefest on
what exactly CONFIG_ISA would mean in ideal world - added symbol has a
well-defined meaning and for now I really want to treat it as completely
independent from the mess around CONFIG_ISA.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04 07:33:13 -07:00
Adrian Bunk 9171078ab5 [PATCH] PCI: drivers/pci/pci.c: remove pci_dac_set_dma_mask
pci_dac_set_dma_mask is currently completely unused.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03 23:45:17 -07:00
Nicolas Pitre 48af721540 [PATCH] ARM: 2662/1: missing "default y" for CONFIG_HAS_TLS_REG
Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-03 22:57:56 +01:00
Sascha Hauer a493820df6 [PATCH] ARM: 2661/1: imxfb include
Patch from Sascha Hauer

This patch adds the missing include files for the i.MX framebuffer
driver.

Signed-off-by: Sascha Hauer
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-03 22:57:56 +01:00
Russell King 1f9c381fa3 [PATCH] ARM: Clean up commenting/spacing for Integrator
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-03 12:22:19 +01:00
Russell King 5cd0c34420 [PATCH] ARM: decompressor: use platform debug macros
Rather than duplicate the assembly for debug macros in the
decompressor head.S, use asm/arch/debug-macros.S instead.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-03 12:18:46 +01:00
Jesper Juhl 7ed20e1ad5 [PATCH] convert that currently tests _NSIG directly to use valid_signal()
Convert most of the current code that uses _NSIG directly to instead use
valid_signal().  This avoids gcc -W warnings and off-by-one errors.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:14 -07:00
Stephen Rothwell 7d87e14c23 [PATCH] consolidate sys_shmat
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Russell King 4774e2260c [PATCH] ARM: IntegratorCP: Fix CLCD MUX selection values
The documentation on these values seems to be rather wrong.
These values have been determined by mere trial and error.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-30 23:32:38 +01:00
Russell King bb9bffcbef [PATCH] ARM: PXA I2C: add platform device
Add the PXA I2C platform device.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-30 13:26:06 +01:00
Russell King d5aa207e46 [PATCH] ARM: RTC: allow driver methods to return error
Allow RTC drivers to return error codes from their read_time
or read_alarm methods.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-30 12:19:28 +01:00
Lennert Buytenhek 53e173f62c [PATCH] ARM: 2660/2: fix ixdp2800 boot and pci init
Patch from Lennert Buytenhek

The IXDP2800 is an evalution platform for the IXP2800 processor that
has two IXP2800s connected to the same PCI bus.  This is problematic
as both CPUs will try to configure the PCI bus as they boot linux.
Contrary to on the other IXP2000 platforms, the boot loader on the
IXDP2800 doesn't configure the PCI bus properly, so we do want the
linux instance on one of the CPUs to do that.
Making one of the CPUs ignore the PCI bus (and thus act like a pure
PCI slave device) is not an option because there is a 82559 NIC on
the PCI bus for each of the CPUs.
The chosen solution is to have the master CPU configure the PCI bus
while the slave is kept in a quiescent state, and then to have the
slave CPU scan the PCI bus (without assigning resources) while the
master is kept in a quiescent state.  After this ritual, the master
deletes the slave NIC from its PCI device list, the slave deletes
the master NIC from its device list, and (almost) all is well.
There's still one little problem: each of the CPUs has a 1G SDRAM
BAR, but the IXP2000 only has 512M of outbound PCI memory window.
We solve this by hand-assigning the master and slave SDRAM BARs to
a location outside each of the IXP's outbound PCI windows, and by
having the rest of the BARs autoconfigured in the outbound PCI
windows, in the range [e0000000..ffffffff], so that there is a 1:1
pci:phys mapping between them.
Even with this patch, a number of issues still remain -- just imagine
what happens if one of the CPUs is rebooted, by watchdog or by hand,
but the other one isn't.  But those issues are not easily fixable
given the strange PCI layout of this board and the behavior of the
boot loader shipped with the platform.

Signed-off-by: Lennert Buytenhek
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 22:13:57 +01:00
George G. Davis ca315159df [PATCH] ARM: 2656/1: Access permission bits are wrong for kernel XIP sections on ARMv6
Patch from George G. Davis

This patch is required for kernel XIP support on ARMv6 machines.  It ensures that the access permission bits for kernel XIP section descriptors are APX=1 and AP[1:0]=01, which is Kernel read-only/User no access permissions.  Prior to this change, kernel XIP section descriptor access permissions were set to Kernel no access/User no access on ARMv6 machines and the kernel would therefore hang upon entry to userspace when set_fs(USER_DS) was executed.

Signed-off-by: Steve Longerbeam
Signed-off-by: George G. Davis
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 22:08:35 +01:00
Nicolas Pitre 2d2669b629 [PATCH] ARM: 2651/3: kernel helpers for NPTL support
Patch from Nicolas Pitre

This patch entirely reworks the kernel assistance for NPTL on ARM.
In particular this provides an efficient way to retrieve the TLS
value and perform atomic operations without any instruction emulation
nor special system call.  This even allows for pre ARMv6 binaries to
be forward compatible with SMP systems without any penalty.
The problematic and performance critical operations are performed
through segment of kernel provided user code reachable from user space
at a fixed address in kernel memory.  Those fixed entry points are
within the vector page so we basically get it for free as no extra
memory page is required and nothing else may be mapped at that
location anyway.
This is different from (but doesn't preclude) a full blown VDSO
implementation, however a VDSO would prevent some assembly tricks with
constants that allows for efficient branching to those code segments.
And since those code segments only use a few cycles before returning to
user code, the overhead of a VDSO far call would add a significant
overhead to such minimalistic operations.
The ARM_NR_set_tls syscall also changed number.  This is done for two
reasons:
1) this patch changes the way the TLS value was previously meant to be
   retrieved, therefore we ensure whatever library using the old way
   gets fixed (they only exist in private tree at the moment since the
   NPTL work is still progressing).
2) the previous number was allocated in a range causing an undefined
   instruction trap on kernels not supporting that syscall and it was
   determined that allocating it in a range returning -ENOSYS would be
   much nicer for libraries trying to determine if the feature is
   present or not.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 22:08:33 +01:00
George G. Davis 3a1e501511 [PATCH] ARM: 2655/1: ARM1136 SWP instruction abort handler fix
Patch from George G. Davis

As noted in http://www.arm.com/linux/patch-2.6.9-arm1.gz, the "Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR." So the v6_early_abort handler does not report the correct rd/wr direction for the SWP instruction which may result in SEGVS or hangs. In order to work around this problem, this patch merely updates the fix contained in the ARM Ltd. patch to use the macroised abort handler fixups.

Signed-off-by: George G. Davis
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 22:08:33 +01:00
Lennert Buytenhek 458a83fa43 [PATCH] ARM: 2659/1: do not assign PCI I/O address zero on IXP2000
Patch from Lennert Buytenhek

Assigning the address zero to a PCI device BAR causes some part of the
PCI subsystem to believe that resource allocation for that BAR failed
due to resource conflicts, which will make attempts to enable the
device fail.  Work around this by assigning I/O addresses starting
from 00010000.
While we're at it, make the PCI I/O resource end at 0001ffff, since we
only have 64k of outbound I/O window on the IXP2000, and we don't do
bank switching.

Signed-off-by: Lennert Buytenhek
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 21:58:16 +01:00
Lennert Buytenhek ae36bf5861 [PATCH] ARM: 2658/1: start ixp2000 pci memory resource at 0xe0000000
Patch from Lennert Buytenhek

On the IXDP2800, the bootloader does an awful job of configuring
the PCI bus, so we make linux reconfigure everything.  Having a 1:1
pci:phys address mapping generally simplifies everything, so try to
allocate PCI addresses from the [e0000000..ffffffff] range, which is
the physical address range of the outbound PCI window on the IXP2000.
This does not affect any of the other IXP2000 platforms since they
all use their bootloader's PCI resource assignment.

Signed-off-by: Lennert Buytenhek
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 21:58:15 +01:00
Lennert Buytenhek 8443b165f1 [PATCH] ARM: 2657/1: export ixp2000_pci_config_addr
Patch from Lennert Buytenhek

Export ixp2000_pci_config_addr, to be used by the IXDP2800 platform
setup code to coordinate booting the master and slave NPU.

Signed-off-by: Lennert Buytenhek
Signed-off-by: Deepak Saxena
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 21:58:15 +01:00
Russell King bce495d865 [PATCH] ARM: make entry*.S includes more logical
Move common includes to entry-header, and file specific includes
to the relevant file.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:21:02 +01:00
Russell King f4dc9a4cf2 [PATCH] ARM: Remove single-use user save/restore macros
Assembly macros are pointless if they're only used once.  Move
them inline.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:20:34 +01:00
Russell King cf88b417f9 [PATCH] ARM: remove PT_TRACESYS
PT_TRACESYS is unused, remove it.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:20:12 +01:00
Russell King acaca3c915 [PATCH] ARM: Remove SVC_MODE definition
SVC_MODE reflects the MODE_SVC definition in asm/ptrace.h.  Use
the asm/ptrace.h definition instead, and remove SVC_MODE.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:19:48 +01:00
Russell King e0f9f4a622 [PATCH] ARM: Use __NR_SYSCALL_BASE and __ARM_NR_BASE in asm code
Don't define our own local constants, but use those already defined
in asm/unistd.h instead.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:19:24 +01:00
Russell King 925c8a1a8c [PATCH] ARM: pt_regs offsets
Generate pt_regs S_xx offsets from the structure itself instead
of #defining them.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:18:59 +01:00
Russell King 1ec42c0c97 [PATCH] ARM: Remove argument for disable_irq/enable_irq
Since we do not require a register for these operations, we can
remove this unnecessary argument.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:18:26 +01:00
Russell King 7933523dc7 [PATCH] ARM: remove some entry initialisation asm code
Convert the trivial vector entry initialisation code to C code.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:17:42 +01:00
Jeff Lackey 41130d37a4 [PATCH] ARM: 2650/1: PXA27x sleep - workaround Errata 39 & 50 (Patch 2667)
Patch from Jeff Lackey

This patch updates arch/arm/mach-pxa/sleep.S to support
the PXA270 CPU.  It works around Errata 39 & 50 from the
Intel(R) PXA27x Processor Family Specification Update.

Signed-off-by: Jeff Lackey
Signed-off-by: Russell King
2005-04-25 23:38:55 +01:00
Hugh Dickins 6119be0bba [PATCH] freepgt: arm FIRST_USER_ADDRESS PAGE_SIZE
ARM define FIRST_USER_ADDRESS as PAGE_SIZE (beyond the machine vectors when
they are mapped low), and use that definition in place of locally defined
MIN_MAP_ADDR.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 13:29:21 -07:00
Russell King 7a55fd0bb3 [PATCH] ARM: Add missing new file for bitops patch
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-18 22:50:01 +01:00
Russell King 684f970e2f [PATCH] ARM: bitops
Convert ARM bitop assembly to a macro.  All bitops follow the same
format, so it's silly duplicating the code when only one or two
instructions are different.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-17 15:51:02 +01:00
Russell King 652a12ef98 [PATCH] ARM: showregs
Fix show_regs() to provide a backtrace.  Provide a new __show_regs()
function which implements the common subset of show_regs() and die().
Add prototypes to asm-arm/system.h

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-17 15:50:36 +01:00
Russell King 58c02ec470 [PATCH] ARM: h3600_irda_set_speed arguments
h3600_irda_set_speed() had the wrong type for the "speed" argument.
Fix this.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-17 15:40:46 +01:00
Russell King 336eb02b91 [PATCH] ARM: footbridge rtc init
The footbridge ISA RTC was being initialised before we had setup the
kernel timer.  This caused a divide by zero error when the current
time of day is set.  Resolve this by initialising the RTC after
the kernel timer has been initialised.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-17 15:36:55 +01:00
akpm@osdl.org d42ce812b8 [PATCH] arm: add comment about max_low_pfn/max_pfn
)


From: Russell King <rmk+lkml@arm.linux.org.uk>

Oddly, max_low_pfn/max_pfn end up being the number of pages in the system,
rather than the maximum PFN on ARM.  This doesn't seem to cause any problems,
so just add a note about it.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:23:57 -07:00
akpm@osdl.org 7aa52f5128 [PATCH] arm: fix help text for ixdp465
)


From: Russell King <rmk+lkml@arm.linux.org.uk>

For some reason, this help text was missed when the file was last audited
by the documentation referencing folk.  Fix this incorrect documentation
reference.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:23:56 -07:00
akpm@osdl.org 2d137c24e9 [PATCH] arm: fix SIGBUS handling
)


From: Russell King <rmk+lkml@arm.linux.org.uk>

ARM wasn't raising a SIGBUS with a siginfo structure.  Fix
__do_user_fault() to allow us to use it for SIGBUS conditions, and arrange
for the sigbus path to use this.

We need to prevent the siginfo code being called if we do not have a user
space context to call it, so consolidate the "user_mode()" tests.

Thanks to Ian Campbell who spotted this oversight.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:23:55 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00