Currently KVM_STATE_NESTED_EVMCS is used to signal that eVMCS
capability is enabled on vCPU.
As indicated by vmx->nested.enlightened_vmcs_enabled.
This is quite bizarre as userspace VMM should make sure to expose
same vCPU with same CPUID values in both source and destination.
In case vCPU is exposed with eVMCS support on CPUID, it is also
expected to enable KVM_CAP_HYPERV_ENLIGHTENED_VMCS capability.
Therefore, KVM_STATE_NESTED_EVMCS is redundant.
KVM_STATE_NESTED_EVMCS is currently used on restore path
(vmx_set_nested_state()) only to enable eVMCS capability in KVM
and to signal need_vmcs12_sync such that on next VMEntry to guest
nested_sync_from_vmcs12() will be called to sync vmcs12 content
into eVMCS in guest memory.
However, because restore nested-state is rare enough, we could
have just modified vmx_set_nested_state() to always signal
need_vmcs12_sync.
From all the above, it seems that we could have just removed
the usage of KVM_STATE_NESTED_EVMCS. However, in order to preserve
backwards migration compatibility, we cannot do that.
(vmx_get_nested_state() needs to signal flag when migrating from
new kernel to old kernel).
Returning KVM_STATE_NESTED_EVMCS when just vCPU have eVMCS enabled
have a bad side-effect of userspace VMM having to send nested-state
from source to destination as part of migration stream. Even if
guest have never used eVMCS as it doesn't even run a nested
hypervisor workload. This requires destination userspace VMM and
KVM to support setting nested-state. Which make it more difficult
to migrate from new host to older host.
To avoid this, change KVM_STATE_NESTED_EVMCS to signal eVMCS is
not only enabled but also active. i.e. Guest have made some
eVMCS active via an enlightened VMEntry. i.e. vmcs12 is copied
from eVMCS and therefore should be restored into eVMCS resident
in memory (by copy_vmcs12_to_enlightened()).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Documentation the new computation selection 'cycles'.
v4:
---
Change the column 'Block cycles diff [start:end]' to
'[Program Block Range] Cycles Diff'
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-8-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The target is to compare the performance difference (cycles diff) for
the same basic blocks in different data files.
The same basic block means same function, same start address and same
end address. This patch finds the same basic blocks from different data
files and link them together and resort by the cycles diff.
v3:
---
The block stuffs are maintained by new structure 'block_hist',
so this patch is update accordingly.
v2:
---
Since now the basic block hists is changed to per symbol,
the patch only links the basic block hists for the same
symbol in different data files.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com
[ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist__account_cycles() can account cycles per basic block. The basic
block information is saved in cycles_hist structure.
This patch processes each symbol, get basic blocks from cycles_hist and
add the basic block entries to a new hists (in 'struct block_hist').
Using a hists is because we need to compare, sort and print the basic
blocks later.
v6:
---
Since 'ops' argument is removed from hists__add_entry_block,
update the code accordingly. No functional change.
v5:
---
Since now we still carry block_info in 'struct hist_entry'
we don't need to use our own new/free ops for hist entries.
And the block_info is released in hist_entry__delete.
v3:
---
1. In v2, we put block stuffs in 'struct hist_entry', but
it's not a good design. In v3, we create a new
'struct block_hist' and cast the 'struct hist_entry' to
'struct block_hist' in some places, which can avoid adding
new stuffs in 'struct hist_entry'.
2. abs() -> labs(), in block_cycles_diff_cmp().
v2:
---
v1 adds the basic block entries to per data-file hists
but v2 adds the basic block entries to per symbol hists.
That is to keep current perf-diff format. Will show the
result in next patches.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will expand perf diff to support diff cycles of individual programs
blocks, so it requires all data files having branch stacks.
This patch checks HEADER_BRANCH_STACK in header, and only set the flag
has_br_stack when HEADER_BRANCH_STACK are set in all data files.
v2:
---
Move check_file_brstack() from __cmd_diff() to cmd_diff().
Because later patch will check flag 'has_br_stack' before
ui_init().
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The block_info contains the program basic block information, i.e,
contains the start address and the end address of this basic block and
how much cycles it takes.
We need to compare, sort and even print out the basic block by some
orders, i.e. sort by cycles.
For this purpose, we add block_info field to hist_entry. In order not to
impact current interface, we creates a new function
hists__add_entry_block.
v6:
---
Remove the 'ops' argument in hists__add_entry_block
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf diff' currently can only diff symbols(functions).
We should expand it to diff cycles of individual programs blocks as
reported by timed LBR. This would allow to identify changes in specific
code accurately.
We need a new structure to maintain the basic block information, such as,
symbol(function), start/end address of this block, cycles. This patch
creates this structure and with some ops.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix objtool build, because it adds _ctype dependency via isspace call patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 7bd330de43 ("tools lib: Adopt skip_spaces() from the kernel sources")
Link: http://lkml.kernel.org/r/20190702121240.GB12694@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure that both variants of the nasty TF-in-compat-syscall are
exercised regardless of what vendor's CPU is running the tests.
Also change the intentional signal after SYSCALL to use ud2, which
is a lot more comprehensible.
This crashes the kernel due to an FSGSBASE bug right now.
This test *also* detects a bug in KVM when run on an Intel host. KVM
people, feel free to use it to help debug. There's a bunch of code in this
test to warn instead of going into an infinite looping when the bug gets
triggered.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "BaeChang Seok" <chang.seok.bae@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: "Bae, Chang Seok" <chang.seok.bae@intel.com>
Link: https://lkml.kernel.org/r/5f5de10441ab2e3005538b4c33be9b1965d1bb63.1562035429.git.luto@kernel.org
Since this is not really a device with all capabilities, this test
ensures that it has *enough* to make it through the data path
without causing unwanted side-effects (read crash!).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change pmu-events.c to not use local include statements. The code that
creates the include statements for pmu-events.c is in jevents.c.
pmu-events.c is a generated file, and for build systems that put
generated files in a separate directory, include statements with local
pathing cannot find non-generated files.
Signed-off-by: Luke Mujica <lukemujica@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/n/tip-prgnwmaoo1pv9zz4vnv1bjaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since Fixes: 8c5421c016 ("perf pmu: Display pmu name when printing
unmerged events in stat") using --no-merge adds the PMU name to the
evsel name.
This breaks the metric value lookup because the parser doesn't know
about this.
Remove the extra postfixes for the metric evaluation.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 8c5421c016 ("perf pmu: Display pmu name when printing unmerged events in stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metric group code tries to find a group it added earlier in the
evlist. Fix the lookup to handle groups with partially overlaps
correctly. When a sub string match fails and we reset the match, we have
to compare the first element again.
I also renamed the find_evsel function to find_evsel_group to make its
purpose clearer.
With the earlier changes this fixes:
Before:
% perf stat -M UPI,IPC sleep 1
...
1,032,922 uops_retired.retire_slots # 1.1 UPI
1,896,096 inst_retired.any
1,896,096 inst_retired.any
1,177,254 cpu_clk_unhalted.thread
After:
% perf stat -M UPI,IPC sleep 1
...
1,013,193 uops_retired.retire_slots # 1.1 UPI
932,033 inst_retired.any
932,033 inst_retired.any # 0.9 IPC
1,091,245 cpu_clk_unhalted.thread
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: b18f3e3650 ("perf stat: Support JSON metrics in perf stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event merging is mainly to collapse similar events in lots of different
duplicated PMUs.
It can break metric displaying. It's possible for two metrics to have
the same event, and when the two events happen in a row the second
wouldn't be displayed. This would also not show the second metric.
To avoid this don't merge events in the same PMU. This makes sense, if
we have multiple events in the same PMU there is likely some reason for
it (e.g. using multiple groups) and we better not merge them.
While in theory it would be possible to construct metrics that have
events with the same name in different PMU no current metrics have this
problem.
This is the fix for perf stat -M UPI,IPC (needs also another bug fix to
completely work)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 430daf2dc7 ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20190624193711.35241-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After setting up metric groups through the event parser, the metricgroup
code looks them up again in the event list.
Make sure we only look up events that haven't been used by some other
metric. The data structures currently cannot handle more than one metric
per event. This avoids problems with multiple events partially
overlapping.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20190624193711.35241-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This came from the kernel lib/argv_split.c, so move it to
tools/lib/argv_split.c, to get it closer to the kernel structure.
We need to audit the usage of argv_split() to figure out if it is really
necessary to do have one allocation per argv[] entry, looking at one of
its users I guess that is not the case and we probably are even leaking
those allocations by not using argv_free() judiciously, for later.
With this we further remove stuff from tools/perf/util/, reducing the
perf specific codebase and encouraging other tools/ code to use these
routines so as to keep the style and constructs used with the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-j479s1ive9h75w5lfg16jroz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour intended, just reducing the codebase and using
something available in tools/lib/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-oyi6zif3810nwi4uu85odnhv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to further reduce the size of tools/perf/util/string.c,
replacing the strxfrchar() equivalent function we have there.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x3r61ikjrso1buygxwke8id3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cleaning up a bit more tools/perf/util/ by using things we got from the
kernel and have in tools/lib/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7hluuoveryoicvkclshzjf1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A few bits for the counters subsystem mixed in here as well.
There are some late breaking fixes as well, which aren't so urgent
they can't wait for the merge window.
New Device Support
* adf4371
- New driver + bindings.
- Support the adf4372 PLL. Mostly ID and bindings.
* ad8366 (note includes rework of driver needed to allow support for these).
- Support the ADL5240 variable gain amplifier (VGA).
- Support the ADA4961 digital gain amplifier (DGA).
* dps310
- New driver, in several parts from different authors for this temp
and pressure sensor.
- Includes errata workaround for a temperature reading issue.
* stk3310
- Support the stk3335, mostly ID.
Features and cleanups
* core
- drop error handling on debugfs registration.
- harden by making sure we don't overrun iio_chan_info_postfix.
* docs
- convert remaining docs to rst. At somepoint we'll fit these few
into the main IIO docs.
- improve sampling_frequency_available docs but explaining the
range form.
* ad_sigma_delta
- Drop a pointless goto.
* ad2s1210
- Drop pointless platform data null check seeing as we don't actually
use platform data anymore.
* ad7124
- Relax limitation on channel numbers to allow pseudo different channels.
- Support control of whether the input is buffered via DT.
- Use dynamic allocation for channel configuration to make it easier
to support new devices.
- YAML binding conversion.
* ad7150
- Comment tidy up.
- Consistent and simple if (ret) handling of i2c errors.
- FIELD_GET and GENMASK.
- Ternary rather than !!(condition) for readability.
- Use macros to avoid repetition of channel definitions.
* ad7606
- Add software channel config (rather that pin controlled)
- Refactor to simplify addition of new part in future.
* ad7746
- of_deivce_id table.
* ad7780
- MAINTAINERS entry
- YAML DT bindings.
* ad8366
- Stop using core mlock in favour of well scoped local lock.
- SPDX + copyright date update.
* ad9834
- of_device_id table
* adf4371
- Add support for output stage muting before lock on has occured.
* adis library
- MAINTAINERS entry to reflect that this now Alexandru's problem ;)
* adis162xx:
- Fix a slightly incorrect set of comments and print statements on
minimum supported voltage.
* adis16203
- of_device_id table.
* adis16240
- Add of_device_id table (in two parts as first patch only used it for
MODULE_DEVICE_TABLE.)
* adt7316-spi
- of_device_id table
* adxl372
- YAML DT binding conversion.
- Cleanup use of buffer callback functions (precursor to core rework).
* bh1710
- Simplify getting the i2c adapter from the client.
* dht11
- Mote to newer GPIO consumer interface.
* kxcjk-1013.c
- Add binding for sensor in display of some ultrabooks after userspace
tools updated for it not be a problem to report two similar sensors.
* imx7d
- drop unused variables.
- white space
- define instead of variable for clock frequency that is fixed.
- drop pointless error message.
* messon_saradc
- SPDX
* sps30
- MAINTAINERS entry
- YAML binding conversion.
* st_accel
- Tidy up ordering in various buffer related callbacks. This is
part of a long running effort to simplify the core code.
* stm32-dfsdm:
- Manage the resolution cleanly in triggerd modes.
- Add fast mode support which allows more flexible filter choices.
- Add a comment on the reason for a 16 bit record when technically
not 'required'.
* st_lsm6dsx
- Embed device name in the sensor_settings struct as i3c doesn't
have a convenient name field to use for this.
* xilinx-adc
- Relax constraints on supported platforms to reflect that this
can used with FPGAs on PCIe cards and hence many architectures.
* counters/ftm-quaddec
- Fix some formatting io MODULE_AUTHOR
- MAINTAINERS entry
Fixes
* tools
- fix incorrect handling of 32 bit channels.
* sca3000
- Potential endian bug that is unlikely to bite anyone (be64 host
seems unlikely for this old part).
* stm32-adc
- Add vdda-supply. On some boards it needs to be turned on to supply
the ADC. DT bindings included.
* stm32-dfsdm
- Fix output resolution to work with filter orders other than 3.
- Fix output datatype as it's signed and previously claimed not to be.
-----BEGIN PGP SIGNATURE-----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=a3vh
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO device support, features, cleanups and minor fixes for 5.3.
A few bits for the counters subsystem mixed in here as well.
There are some late breaking fixes as well, which aren't so urgent
they can't wait for the merge window.
New Device Support
* adf4371
- New driver + bindings.
- Support the adf4372 PLL. Mostly ID and bindings.
* ad8366 (note includes rework of driver needed to allow support for these).
- Support the ADL5240 variable gain amplifier (VGA).
- Support the ADA4961 digital gain amplifier (DGA).
* dps310
- New driver, in several parts from different authors for this temp
and pressure sensor.
- Includes errata workaround for a temperature reading issue.
* stk3310
- Support the stk3335, mostly ID.
Features and cleanups
* core
- drop error handling on debugfs registration.
- harden by making sure we don't overrun iio_chan_info_postfix.
* docs
- convert remaining docs to rst. At somepoint we'll fit these few
into the main IIO docs.
- improve sampling_frequency_available docs but explaining the
range form.
* ad_sigma_delta
- Drop a pointless goto.
* ad2s1210
- Drop pointless platform data null check seeing as we don't actually
use platform data anymore.
* ad7124
- Relax limitation on channel numbers to allow pseudo different channels.
- Support control of whether the input is buffered via DT.
- Use dynamic allocation for channel configuration to make it easier
to support new devices.
- YAML binding conversion.
* ad7150
- Comment tidy up.
- Consistent and simple if (ret) handling of i2c errors.
- FIELD_GET and GENMASK.
- Ternary rather than !!(condition) for readability.
- Use macros to avoid repetition of channel definitions.
* ad7606
- Add software channel config (rather that pin controlled)
- Refactor to simplify addition of new part in future.
* ad7746
- of_deivce_id table.
* ad7780
- MAINTAINERS entry
- YAML DT bindings.
* ad8366
- Stop using core mlock in favour of well scoped local lock.
- SPDX + copyright date update.
* ad9834
- of_device_id table
* adf4371
- Add support for output stage muting before lock on has occured.
* adis library
- MAINTAINERS entry to reflect that this now Alexandru's problem ;)
* adis162xx:
- Fix a slightly incorrect set of comments and print statements on
minimum supported voltage.
* adis16203
- of_device_id table.
* adis16240
- Add of_device_id table (in two parts as first patch only used it for
MODULE_DEVICE_TABLE.)
* adt7316-spi
- of_device_id table
* adxl372
- YAML DT binding conversion.
- Cleanup use of buffer callback functions (precursor to core rework).
* bh1710
- Simplify getting the i2c adapter from the client.
* dht11
- Mote to newer GPIO consumer interface.
* kxcjk-1013.c
- Add binding for sensor in display of some ultrabooks after userspace
tools updated for it not be a problem to report two similar sensors.
* imx7d
- drop unused variables.
- white space
- define instead of variable for clock frequency that is fixed.
- drop pointless error message.
* messon_saradc
- SPDX
* sps30
- MAINTAINERS entry
- YAML binding conversion.
* st_accel
- Tidy up ordering in various buffer related callbacks. This is
part of a long running effort to simplify the core code.
* stm32-dfsdm:
- Manage the resolution cleanly in triggerd modes.
- Add fast mode support which allows more flexible filter choices.
- Add a comment on the reason for a 16 bit record when technically
not 'required'.
* st_lsm6dsx
- Embed device name in the sensor_settings struct as i3c doesn't
have a convenient name field to use for this.
* xilinx-adc
- Relax constraints on supported platforms to reflect that this
can used with FPGAs on PCIe cards and hence many architectures.
* counters/ftm-quaddec
- Fix some formatting io MODULE_AUTHOR
- MAINTAINERS entry
Fixes
* tools
- fix incorrect handling of 32 bit channels.
* sca3000
- Potential endian bug that is unlikely to bite anyone (be64 host
seems unlikely for this old part).
* stm32-adc
- Add vdda-supply. On some boards it needs to be turned on to supply
the ADC. DT bindings included.
* stm32-dfsdm
- Fix output resolution to work with filter orders other than 3.
- Fix output datatype as it's signed and previously claimed not to be.
* tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits)
iio: iio-utils: Fix possible incorrect mask calculation
iio: frequency: adf4371: Add support for output stage mute
dt-bindings: iio: frequency: Add ADF4372 PLL documentation
iio: frequency: adf4371: Add support for ADF4372 PLL
dt-bindings: iio: adc: Add buffered input property
Convert AD7124 bindings documentation to YAML format.
iio: adc: ad7124: Shift to dynamic allocation for channel configuration
iio: adc: ad7124: Add buffered input support
iio: adc: ad7124: Remove input number limitation
MAINTAINERS: add ADIS IMU driver library entry
iio: adis162xx: fix low-power docs & reports
counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
iio: core: no need to check return value of debugfs_create functions
docs: iio: convert to ReST
iio: adc: stm32-adc: add missing vdda-supply
dt-bindings: iio: adc: stm32: add missing vdda supply
iio: adc: stm32-dfsdm: add comment for 16 bits record
iio: adc: stm32-dfsdm: add fast mode support
iio: adc: stm32-dfsdm: manage data resolution in trigger mode
iio: adc: stm32-dfsdm: fix data type
...
The guard macro __PPC_ASM_H in the header ppc_asm.h
doesn't match the #ifndef macro _PPC_ASM_H. The patch
makes them the same.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch into next, this brings in a number of commits
that fix bugs we don't want to hit in next, in particular the fix for
CVE-2019-12817.
running the script on systems without netdevsim now prints:
SKIP: ipsec_offload can't load netdevsim
instead of error message & failed status.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Ingo Molnar:
"Various fixes, most of them related to bugs perf fuzzing found in the
x86 code"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/regs: Use PERF_REG_EXTENDED_MASK
perf/x86: Remove pmu->pebs_no_xmm_regs
perf/x86: Clean up PEBS_XMM_REGS
perf/x86/regs: Check reserved bits
perf/x86: Disable extended registers for non-supported PMUs
perf/ioctl: Add check for the sample_period value
perf/core: Fix perf_sample_regs_user() mm check
Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
Add a test for xa_insert() (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl0WuKsACgkQDpNsjXcp
gj73zgf9Eb477PuwYZpFBA9ZxI5v/6WyqbaWXKdqEhotARgIUuv1CfVnkt1IJE6P
Z3QCRABZ3pIKHgIErJN53B7AdvdONUO4Xf9VFBqmxeWE7F9L3sROOpXc8IrR26kV
hITQn8mwgacNQ8mLtQmcSFaCVC2E7yVNBhVd5zmcA6jNIAFsOJcP06KLJTe94OXe
AB9TJvswxpzAEX8emHQ/a1SFBNZWJ7b53hBcu8CJn8CuGDxmo1/+qqoRyNY+WrDO
OohFk2u1j6Esfc6j0k+Akt8mEFyfU2oxFfv5MjL0KYEyrHoU84eZljFGgf7rQqGj
fqH9RO8J8eoj4D/3XaLL5QYRLIxRaw==
=AXZy
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
- Account XArray nodes for the page cache to the appropriate cgroup
(Johannes Weiner)
- Fix idr_get_next() when called under the RCU lock (Matthew Wilcox)
- Add a test for xa_insert() (Matthew Wilcox)
* tag 'xarray-5.2-rc6' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add check_insert
idr: Fix idr_get_next race with idr_remove
mm: fix page cache convergence regression
Merge commit 1c8c5a9d38 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the
fix from commit 36f9814a49 ("bpf: fix uapi hole for 32 bit compat
applications") by taking the gpl_compatible 1-bit field definition from
commit b85fab0e67 ("bpf: Add gpl_compatible flag to struct
bpf_prog_info") as is. That breaks architectures with 16-bit alignment
like m68k. Add 31-bit pad after gpl_compatible to restore alignment of
following fields.
Thanks to Dmitry V. Levin his analysis of this bug history.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Let's use union with u8[4] and u32 members for sockopt buffer,
that should fix any possible aliasing issues.
test_sockopt_sk.c: In function ‘getsetsockopt’:
test_sockopt_sk.c:115:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
if (*(__u32 *)buf != 0x55AA*2) {
^~
test_sockopt_sk.c:116:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
log_err("Unexpected getsockopt(SO_SNDBUF) 0x%x != 0x55AA*2",
^~~~~~~
Fixes: 8a027dc0d8 ("selftests/bpf: add sockopt test that exercises sk helpers")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add missing linux/sockios.h include to fix the following SIOCGSTAMP
undeclared build error. In addition, remove the local defines for
SIOCGSTAMPNS and SIOCSHWTSTAMP and pick them up from linux/sockios.h.
timestamping.c:249:19: error: SIOCGSTAMP undeclared
if (ioctl(sock, SIOCGSTAMP, &tv))
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test case drivers/dma-buf/udmabuf need this kernel config enabled
CONFIG_UDMABUF=y
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This adds testing for the new pidfd_open() syscalls. Specifically, we test:
- that no invalid flags can be passed to pidfd_open()
- that no invalid pid can be passed to pidfd_open()
- that a pidfd can be retrieved with pidfd_open()
- that the retrieved pidfd references the correct pid
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Other than verifying pidfd based polling, the tests make sure that
wait semantics are preserved with the pidfd poll. Notably the 2 cases:
1. If a thread group leader exits while threads still there, then no
pidfd poll notifcation should happen.
2. If a non-thread group leader does an execve, then the thread group
leader is signaled to exit and is replaced with the execing thread
as the new leader, however the parent is not notified in this case.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.
In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.
The aquantia driver conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Support sockopt prog type and cgroup hooks in the bpftool.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sockopt test that verifies chaining behavior.
v9:
* setsockopt chaining example
v7:
* rework the test to verify cgroup getsockopt chaining
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
socktop test that introduces new SOL_CUSTOM sockopt level and
stores whatever users sets in sk storage. Whenever getsockopt
is called, the original value is retrieved.
v9:
* SO_SNDBUF example to override user-supplied buffer
v7:
* use retval=0 and optlen-1
v6:
* test 'ret=1' use-case as well (Alexei Starovoitov)
v4:
* don't call bpf_sk_fullsock helper
v3:
* drop (__u8 *)(long) casts for optval{,_end}
v2:
* new test
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add sockopt selftests:
* require proper expected_attach_type
* enforce context field read/write access
* test bpf_sockopt_handled handler
* test EPERM
* test limiting optlen from getsockopt
* test out-of-bounds access
v9:
* add tests for setsockopt argument mangling
v7:
* remove return 2; test retval=0 and optlen=-1
v3:
* use DW for optval{,_end} loads
v2:
* use return code 2 for kernel bypass
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests that make sure libbpf section detection works.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make libbpf aware of new sockopt hooks so it can derive prog type
and hook point from the section names.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Export new prog type and hook points to the libbpf.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
get_gate_page() is a piece of somewhat alarming code to make
get_user_pages() work on the vsyscall page. Test it via
process_vm_readv().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/0fe34229a9330e8f9de9765967939cc4f1cf26b1.1561610354.git.luto@kernel.org
Even if vsyscall=none, user page faults on the vsyscall page are reported
as though the PROT bit in the error code was set. Add a comment explaining
why this is probably okay and display the value in the test case.
While at it, explain why the behavior is correct with respect to PKRU.
Modify also the selftest to print the odd error code so that there is a
way to demonstrate the odd behaviour.
If anyone really cares about more accurate emulation, the behaviour could
be changed. But that needs a real good justification.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/75c91855fd850649ace162eec5495a1354221aaa.1561610354.git.luto@kernel.org
The typical XDP memory scheme is one packet per page. Change the AF_XDP
frame size in libbpf to 4096, which is the page size on x86, to allow
libbpf to be used with the drivers with the packet-per-page scheme.
Add a command line option -f to xdpsock to allow to specify a custom
frame size.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Query XDP_OPTIONS in libbpf to determine if the zero-copy mode is active
or not.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make it possible for the application to determine whether the AF_XDP
socket is running in zero-copy mode. To achieve this, add a new
getsockopt option XDP_OPTIONS that returns flags. The only flag
supported for now is the zero-copy mode indicator.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
On some machines, iio-sensor-proxy was returning all 0's for IIO sensor
values. It turns out that the bits_used for this sensor is 32, which makes
the mask calculation:
*mask = (1 << 32) - 1;
If the compiler interprets the 1 literals as 32-bit ints, it generates
undefined behavior depending on compiler version and optimization level.
On my system, it optimizes out the shift, so the mask value becomes
*mask = (1) - 1;
With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.
Avoid incorrect 0 values caused by compiler optimization.
See original fix by Brett Dutro <brett.dutro@gmail.com> in
iio-sensor-proxy:
9615ceac7c
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This exercises the 'promote_secondaries' code path.
Without previous fix, this triggers infinite loop/soft lockup:
ifconfig process spinning at 100%, never to return.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
- add include/linux/gpio.h to .gitignore in /tools
- improve and simplify code in the em driver
- simplify code in max732x by using devm helpers (including the new
devm_i2c_new_dummy_device())
- fix SPDX header for madera
- remove checking of return values of debugfs routines in gpio-mockup
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl0U1WkACgkQEacuoBRx
13K77Q//XrOD5oHh7yoNttxghRs9DSQrKWmwGoICCd01M870bx60MsfqyGgLowSa
NHgeOr9+BjYHfVhfx8dGobo1EDq6YDiMJUPT++GFFwAgu6RlYpdKvCSm0/KqN8bG
8qkR3BTLQHTUZgMa9Xkj/qFwGMpETqHLsKx3PUjsNESesv6dSI01kJa9meansjtS
H8rrDymQPdewzfeHcYWaCA2AiUMCxmCPygQAbpIyhnASW5GGfsemtsXCIHANp5nC
/TqTdTMUrUBAh7uD43pw7lNBLoSjBGEQRqAOuri2BmUKDUlTJvrC7+9CQz94+bz1
CL23RbChtb94xI+iEPvXo/b6reDg6ulAYuv9UiuGHA+MEPvo/CTobKTK1pSlLjSX
zZ05/vrpVzla/AH3smtbmvwsNeQIF+2FGuqSrvxP9dZ6Ql0XEh2TxkBHgMyrxc7m
W37Mnx+mPbUINkkXr9BXCi8k+zKIwCUZy5B23CUAsS4vx/ONlOzr8VEbQiqa4dn3
TRHG8gUctdHc/Ei/ybeY5HCE5dFCQ+yYQy79RDyJUObht2Ican6axm+h6Ik1nU2M
dP1x/bGzCeVTQvQ7lo+fku7N36CpNR0Je9F+JlUdfdqg7gspbPvMsq2G9n33/a7O
bvJJPBkFdFkzFe2Zxvew/V/mcjJfmjWCvEKZRGT44uz2H7e2Avo=
=55gk
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.3-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel
gpio: updates for v5.3
- add include/linux/gpio.h to .gitignore in /tools
- improve and simplify code in the em driver
- simplify code in max732x by using devm helpers (including the new
devm_i2c_new_dummy_device())
- fix SPDX header for madera
- remove checking of return values of debugfs routines in gpio-mockup
Moving more stuff out of tools/perf/util/ and using the kernel idiom.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wpj8rktj62yse5dq6ckny6de@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we're working on moving stuff out of tools/perf/util/ to
tools/lib/, take the opportunity to adopt routines from the kernel that
are equivalent, so that tools/ code look more like the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zqy1zdu2ok17qvi0ytk8z13c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour, just using the same kernel idiom for such
operation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-a85lkptkt0ru40irpga8yf54@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour intended.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lcywlfqbi37nhegmhl1ar6wg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour intended, trivial optimization done by avoiding
looking for spaces in 'g' right after setting it to "No_group".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f2siadtp3hb5o0l1w7bvd8bk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p9rtamq7lvre9zhti70azfwe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The skip_sep() routine has the same implementation as skip_spaces(),
recently adopted from the kernel, sources, switch to it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0ix211a81z2016dl5nmtdci4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cgroup code tries to use argv[0] as the cgroup path,
but if it fails uses argv[1] to report errors.
Fixes: 5ccda64d38 ("bpftool: implement cgroup bpf operations")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Non-BPF (user land) part of selftests is built without debug info making
occasional debugging with gdb terrible. Build with debug info always.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It fixes build error for 32bit caused by type mismatch
size_t/unsigned long.
Fixes: bf82927125 ("libbpf: refactor map initialization")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
No change in behaviour intended.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-cpugv7qd5vzhbtvnlydo90jv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour.
Cc: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0dbfpi70aa66s6mtd8z6p391@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ncpvp4eelf8fqhuy29uv56z9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Same implementation, will be used to replace ad-hoc equivalent code in
tools/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dig691cg9ripvoiprpidthw7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were a few places where we still were using the libc version of
ctype.h, switch to the one in tools/lib/ctype.c that the rest of perf
uses.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wa4nz4kt61eze88eprk20tfd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not to depend of getting it indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tirjsmvu4ektw0k7lm8k9lhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was just including a ../util.h that wasn't even there:
$ cat tools/perf/util/include/linux/../util.h
cat: tools/perf/util/include/linux/../util.h: No such file or directory
$
This would make kallsyms.h get util.h somehow and then files including
it would get util.h defined stuff, a mess, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wlzwken4psiat4zvfbvaoqiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing to untangle the headers, we're about to remove the old odd
baggage that is tools/perf/util/include/linux/ctype.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gapezcq3p8bzrsi96vdtq0o0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just removing more stuff from tools/perf/, this is mostly used in the
kallsyms parsing and in places in perf where kallsyms is involved, so we
get it for free there.
With this we reduce a bit more util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5mc1zg0jqdwgkn8c358kaba6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're getting it by sheer luck, add that util.h to get the 'page_size'
definition.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-347078mgj3d2jfygtxs4ntti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are not in that file in the git repo, lets move it from there so
that we get that sane ctype code fully isolated to allow getting it in
sync either with the git sources or better with the kernel sources
(include/linux/ctype.h + lib/ctype.h), that way we can use
check_headers.h to get notified when changes are made in the original
code so that we can cherry-pick.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ioh5sghn3943j0rxg6lb2dgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch restores the original behaviour for tdc prior to the
introduction of the plugin system, where the network namespace
functionality was split from the main script.
It introduces the concept of required plugins for testcases,
and will automatically load any plugin that isn't already
enabled when said plugin is required by even one testcase.
Additionally, the -n option for the nsPlugin is deprecated
so the default action is to make use of the namespaces.
Instead, we introduce -N to not use them, but still create
the veth pair.
buildebpfPlugin's -B option is also deprecated.
If a test cases requires the features of a specific plugin
in order to pass, it should instead include a new key/value
pair describing plugin interactions:
"plugins": {
"requires": "buildebpfPlugin"
},
A test case can have more than one required plugin: a list
can be inserted as the value for 'requires'.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can left justify just fine using the 'field width' modifier in %s
printf, ditch this variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2td8u86mia7143lbr5ttl0kf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can just use the 'field width' for the %s used to print the
alignment, this way we'll get the same result without requiring having a
variable with just lots of space chars.
No way to do that for the dots tho, we still need that variable filled
with dot chars.
# perf report --stdio --hierarchy > before
# perf report --stdio --hierarchy > after
# diff before after
#
I.e. it continues as:
# perf report --stdio --hierarchy | head -15
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 107 of event 'cycles'
# Event count (approx.): 31378313
#
# Overhead Command / Shared Object / Symbol
# .............. ............................................
#
80.13% swapper
72.29% [kernel.vmlinux]
49.85% [k] intel_idle
9.05% [k] tick_nohz_next_event
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9s1dxik37waveor7c84hqti2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not being used at all anywhere.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1e567f8tn8m4ii7dy1w9dp39@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The format of synthesized events is determined by the attribute config.
For the formats for Intel PT power and ptwrite events, create tables and
populate them when the synth_data handler is called. If the tables
remain empty, drop them at the end.
The tables and views, including a combined power_events_view, will
display automatically from the tables menu of the exported
exported-sql-viewer.py script.
Note, currently only Atoms since Gemini Lake have support for ptwrite
and mwait, pwre, exstop and pwrx, but all Intel PT implementations
support cbr.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The format of synthesized events is determined by the attribute config.
For the formats for Intel PT power and ptwrite events, create tables and
populate them when the synth_data handler is called. If the tables
remain empty, drop them at the end.
The tables and views, including a combined power_events_view, will
display automatically from the tables menu of the exported
exported-sql-viewer.py script.
Note, currently only Atoms since Gemini Lake have support for ptwrite
and mwait, pwre, exstop and pwrx, but all Intel PT implementations
support cbr.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesized events are samples but with architecture-specific data
stored in sample->raw_data. They are identified by attribute type
PERF_TYPE_SYNTH. Add a function to export them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first core-to-bus ratio (CBR) event will not be shown if --itrace
's' option (skip initial number of events) is used, nor if time
intervals are specified that do not include the start of tracing. Change
the logic to record the last CBR value seen by the user, and synthesize
CBR events whenever that changes.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For convenience, add the core-to-bus ratio (CBR) value to the decoder
state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PSB+ provides status information only so the core-to-bus ratio (CBR) in
PSB+ will not have changed from its previous value. However, cater for
the possibility of a another CBR change that gets caught up in the PSB+
anyway.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The core-to-bus ratio (CBR) provides the CPU frequency. With branches
enabled, the decoder was outputting CBR changes only when there was a
branch. That loses the correct time of the change if the trace is not in
context (e.g. not tracing kernel space). Change to output the CBR change
immediately.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Attempting to profile 1024 or more CPUs with perf causes two errors:
perf record -a
[ perf record: Woken up X times to write data ]
way too many cpu caches..
[ perf record: Captured and wrote X MB perf.data (X samples) ]
perf report -C 1024
Error: failed to set cpu bitmap
Requested CPU 1024 too large. Consider raising MAX_NR_CPUS
Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as
MAX_NR_CPUS * 4 returns normal functionality to perf:
perf record -a
[ perf record: Woken up X times to write data ]
[ perf record: Captured and wrote X MB perf.data (X samples) ]
perf report -C 1024
...
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use new function thread_stack__pop_ks() in place of equivalent code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190619064429.14940-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f08046cb30 ("perf thread-stack: Represent jmps to the start of a
different symbol") had the side-effect of introducing more stack entries
before return from kernel space.
When user space is also traced, those entries are popped before entry to
user space, but when user space is not traced, they get stuck at the
bottom of the stack, making the stack grow progressively larger.
Fix by detecting a return-from-kernel branch type, and popping kernel
addresses from the stack then.
Note, the problem and fix affect the exported Call Graph / Tree but not
the callindent option used by "perf script --call-trace".
Example:
perf-with-kcore record example -e intel_pt//k -- ls
perf-with-kcore script example --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py example.db branches calls
~/libexec/perf-core/scripts/python/exported-sql-viewer.py example.db
Menu option: Reports -> Context-Sensitive Call Graph
Before: (showing Call Path column only)
Call Path
▶ perf
▼ ls
▼ 12111:12111
▶ setup_new_exec
▶ __task_pid_nr_ns
▶ perf_event_pid_type
▶ perf_event_comm_output
▶ perf_iterate_ctx
▶ perf_iterate_sb
▶ perf_event_comm
▶ __set_task_comm
▶ load_elf_binary
▶ search_binary_handler
▶ __do_execve_file.isra.41
▶ __x64_sys_execve
▶ do_syscall_64
▼ entry_SYSCALL_64_after_hwframe
▼ swapgs_restore_regs_and_return_to_usermode
▼ native_iret
▶ error_entry
▶ do_page_fault
▼ error_exit
▼ retint_user
▶ prepare_exit_to_usermode
▼ native_iret
▶ error_entry
▶ do_page_fault
▼ error_exit
▼ retint_user
▶ prepare_exit_to_usermode
▼ native_iret
▶ error_entry
▶ do_page_fault
▼ error_exit
▼ retint_user
▶ prepare_exit_to_usermode
▶ native_iret
After: (showing Call Path column only)
Call Path
▶ perf
▼ ls
▼ 12111:12111
▶ setup_new_exec
▶ __task_pid_nr_ns
▶ perf_event_pid_type
▶ perf_event_comm_output
▶ perf_iterate_ctx
▶ perf_iterate_sb
▶ perf_event_comm
▶ __set_task_comm
▶ load_elf_binary
▶ search_binary_handler
▶ __do_execve_file.isra.41
▶ __x64_sys_execve
▶ do_syscall_64
▶ entry_SYSCALL_64_after_hwframe
▶ page_fault
▼ entry_SYSCALL_64
▼ do_syscall_64
▶ __x64_sys_brk
▶ __x64_sys_access
▶ __x64_sys_openat
▶ __x64_sys_newfstat
▶ __x64_sys_mmap
▶ __x64_sys_close
▶ __x64_sys_read
▶ __x64_sys_mprotect
▶ __x64_sys_arch_prctl
▶ __x64_sys_munmap
▶ exit_to_usermode_loop
▶ __x64_sys_set_tid_address
▶ __x64_sys_set_robust_list
▶ __x64_sys_rt_sigaction
▶ __x64_sys_rt_sigprocmask
▶ __x64_sys_prlimit64
▶ __x64_sys_statfs
▶ __x64_sys_ioctl
▶ __x64_sys_getdents64
▶ __x64_sys_write
▶ __x64_sys_exit_group
Committer notes:
The first arg to the perf-with-kcore needs to be the same for the
'record' and 'script' lines, otherwise we'll record the perf.data file
and kcore_dir/ files in one directory ('example') to then try to use it
from the 'bep' directory, fix the instructions above it so that both use
'example'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f08046cb30 ("perf thread-stack: Represent jmps to the start of a different symbol")
Link: http://lkml.kernel.org/r/20190619064429.14940-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the include path so that progress.c can find cache.h since it was
previously searching in the wrong directory.
Committer notes:
$ ls -la tools/perf/ui/../cache.h
ls: cannot access 'tools/perf/ui/../cache.h': No such file or directory
So it really should include ../../util/cache.h, or plain cache.h, since
we have -Iutil in INC_FLAGS in tools/perf/Makefile.config
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>,
Cc: Luke Mujica <lukemujica@google.com>,
Cc: Stephane Eranian <eranian@google.com>
To: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/n/tip-pud8usyutvd2npg2vpsygncz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are several spelling mistakes in pr_warning messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the macro defined in kernel ABI header to replace the local name.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of just listing and flushing two cached exceptions, create
a relatively big number of them, and count how many are listed. Single
netlink dump messages contain approximately 25 entries each, and this
way we can make sure the partial dump tracking mechanism is working
properly.
While at it, also ensure that no cached routes can be listed after
flush, and remove 'sleep 1' calls, they are not actually needed.
v7: No changes
v6:
- Merge this patch into series including fix, as it's also targeted
for net-next. No actual changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that route exceptions can be successfully listed and
flushed using ip -6 route {list,flush} cache.
v7: No changes
v6:
- Merge this patch into series including fix, as it's also targeted
for net-next
- Drop left-over print of 'ip route list cache | wc -l'
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu recently reported a problem concerning RCU and compiler
barriers. In the course of discussing the problem, he put forth a
litmus test which illustrated a serious defect in the Linux Kernel
Memory Model's data-race-detection code [1].
The defect was that the LKMM assumed visibility and executes-before
ordering of plain accesses had to be mediated by marked accesses. In
Herbert's litmus test this wasn't so, and the LKMM claimed the litmus
test was allowed and contained a data race although neither is true.
In fact, plain accesses can be ordered by fences even in the absence
of marked accesses. In most cases this doesn't matter, because most
fences only order accesses within a single thread. But the rcu-fence
relation is different; it can order (and induce visibility between)
accesses in different threads -- events which otherwise might be
concurrent. This makes it relevant to data-race detection.
This patch makes two changes to the memory model to incorporate the
new insight:
If a store is separated by a fence from another access,
the store is necessarily visible to the other access (as
reflected in the ww-vis and wr-vis relations). Similarly,
if a load is separated by a fence from another access then
the load necessarily executes before the other access (as
reflected in the rw-xbstar relation).
If a store is separated by a strong fence from a marked access
then it is necessarily visible to any access that executes
after the marked access (as reflected in the ww-vis and wr-vis
relations).
With these changes, the LKMM gives the desired result for Herbert's
litmus test and other related ones [2].
[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.1906041026570.1731-100000@iolanthe.rowland.org/
[2] https://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-1.litmushttps://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-2.litmushttps://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-3.litmushttps://github.com/paulmckrcu/litmus/blob/master/manual/plain/C-S-rcunoderef-4.litmushttps://github.com/paulmckrcu/litmus/blob/master/manual/plain/strong-vis.litmus
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Add a simple scripts to exercise several situations when enable
route_localnet.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Zhiqiang liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One fix for a bug in our context id handling on 64-bit hash CPUs, which can lead
to unrelated processes being able to read/write to each other's virtual memory.
See the commit for full details.
That is the fix for CVE-2019-12817.
This also adds a kernel selftest for the bug.
-----BEGIN PGP SIGNATURE-----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=y5oH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a bug in our context id handling on 64-bit hash CPUs,
which can lead to unrelated processes being able to read/write to each
other's virtual memory. See the commit for full details.
That is the fix for CVE-2019-12817.
This also adds a kernel selftest for the bug"
* tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add test of fork with mapping above 512TB
powerpc/mm/64s/hash: Reallocate context ids on fork
This validates that GS and GSBASE are independently preserved in
ptracer commands.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lkml.kernel.org/r/1557309753-24073-16-git-send-email-chang.seok.bae@intel.com
This validates that GS and GSBASE are independently preserved across
context switches.
[ chang: Use FSGSBASE instructions directly instead of .byte ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lkml.kernel.org/r/1557309753-24073-15-git-send-email-chang.seok.bae@intel.com
The test validates that the selector is not changed when a ptracer writes
the ptracee's GSBASE.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lkml.kernel.org/r/1557309753-24073-3-git-send-email-chang.seok.bae@intel.com
PTI has a significant impact on precision of the MONOTONIC_RAW clock,
which prevents a lot of computers from running the freq-step test.
Increase the maximum acceptable precision for the test to not be skipped
to 500 nanoseconds.
After commit 78b98e3c5a ("timekeeping/ntp: Determine the multiplier
directly from NTP tick length") the frequency and time errors should be
much smaller. Reduce the maximum acceptable values for the test to pass
to 0.02 ppm and 50 nanoseconds respectively.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Link: https://lkml.kernel.org/r/20190618160612.21957-1-mlichvar@redhat.com
The rcu-fence relation in the Linux Kernel Memory Model is not well
named. It doesn't act like any other fence relation, in that it does
not relate events before a fence to events after that fence. All it
does is relate certain RCU events to one another (those that are
ordered by the RCU Guarantee); this induces an actual
strong-fence-like relation linking events preceding the first RCU
event to those following the second.
This patch renames rcu-fence, now called rcu-order. It adds a new
definition of rcu-fence, something which should have been present all
along because it is used in the rb relation. And it modifies the
fence and strong-fence relations by making them incorporate the new
rcu-fence.
As a result of this change, there is no longer any need to define
full-fence in the section for detecting data races. It can simply be
replaced by the updated strong-fence relation.
This change should have no effect on the operation of the memory model.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Commit 66be4e66a7 ("rcu: locking and unlocking need to always be at
least barriers") added compiler barriers back into rcu_read_lock() and
rcu_read_unlock(). Furthermore, srcu_read_lock() and
srcu_read_unlock() have always contained compiler barriers.
The Linux Kernel Memory Model ought to know about these barriers.
This patch adds them into the memory model.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
for nested state save/restore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdC7NHAAoJEL/70l94x66DHm0H/R8L80sWe1OJbHHK8caPpwm2
mPt6JNcG/ysbG/uoMuVsdRAjZsg9l8JZB9xfA2m/ZPQQThjSG/WX0rU+gWMMI3X8
8ZbN4BCFoiNpOzOkhmStwzMWnvovKvMfhFW0BAI3HLUfM9A+XyVvNM/JbLOvEMRk
WB2SxYRc38ZvIbi8eXgsoFrVyLFB2Fj/0jps4FbKnkjkl37PTDehYLWQ1pt9KsWS
2KdGoXm7/18ottqf0DPfLe0hiiiDuK3akKz7WQBMsAJHi4Fm5j39NuseeRdlablk
uE4vM/sVaLn4xwM9JfrsBl9TzZ2qHsOTRlMQG4iNWjEAuPKa45lt0Jo7OBs6DSY=
=Lzxe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, plus selftest patches and nicer structs for
nested state save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: arm/arm64: Fix emulated ptimer irq injection
tests: kvm: Check for a kernel warning
kvm: tests: Sort tests in the Makefile alphabetically
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
KVM: fix typo in documentation
KVM: nVMX: use correct clean fields when copying from eVMCS
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
KVM: arm64: Implement vq_present() as a macro
Commit 332d079735 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS
state before setting new state", 2019-05-02) broke evmcs_test because the
eVMCS setup must be performed even if there is no VMXON region defined,
as long as the eVMCS bit is set in the assist page.
While the simplest possible fix would be to add a check on
kvm_state->flags & KVM_STATE_NESTED_EVMCS in the initial "if" that
covers kvm_state->hdr.vmx.vmxon_pa == -1ull, that is quite ugly.
Instead, this patch moves checks earlier in the function and
conditionalizes them on kvm_state->hdr.vmx.vmxon_pa, so that
vmx_set_nested_state always goes through vmx_leave_nested
and nested_enable_evmcs.
Fixes: 332d079735 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state")
Cc: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-06-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin.
2) BTF based map definition, from Andrii.
3) support bpf_map_lookup_elem for xskmap, from Jonathan.
4) bounded loops and scalar precision logic in the verifier, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kselftest can be run against older kernels. Instead of failing hard
when a feature is unsupported, return the KSFT_SKIP exit code.
Specifically, do not fail hard on missing udp zerocopy.
The udp gso bench test runs multiple test cases from a single script.
Fail if any case fails, else return skip if any test is skipped.
Link: https://lore.kernel.org/lkml/20190618171516.GA17547@kroah.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use "herd7" in each such reference.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The comment should say "Sometimes" for the result.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Based on 1 normalized pattern(s):
gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 58 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2 see
the copying file in the top level directory
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 35 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it would be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.982710800@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 48 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
use of this source code is governed by the gplv2 license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.507272547@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
adapted from oprofile gplv2 support
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to add the SPDX license identifier to 1 file(s)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.397687630@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
released under the gpl v2 based on gplv2 source code
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.281377867@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
released under the terms of the gpl v2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 5 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081203.398003637@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
license__ = gpl version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to add the SPDX identifier to this file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081202.640009675@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
gnu gpl v2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 5 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204655.013483115@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under the gnu general public license version 2 0 gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.630925848@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this source code is licensed under the gnu general public license
version 2 see the file copying for more details
this source code is licensed under general public license version 2
see
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running with /sys/module/kvm_intel/parameters/unrestricted_guest=N,
test that a kernel warning does not occur informing us that
vcpu->mmio_needed=1. This can happen when KVM_RUN is called after a
triple fault.
This test was made to detect a bug that was reported by Syzkaller
(https://groups.google.com/forum/#!topic/syzkaller/lHfau8E3SOE) and
fixed with commit bbeac2830f ("KVM: X86: Fix residual mmio emulation
request to userspace").
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve the KVM_{GET,SET}_NESTED_STATE structs by detailing the format
of VMX nested state data in a struct.
In order to avoid changing the ioctl values of
KVM_{GET,SET}_NESTED_STATE, there is a need to preserve
sizeof(struct kvm_nested_state). This is done by defining the data
struct as "data.vmx[0]". It was the most elegant way I found to
preserve struct size while still keeping struct readable and easy to
maintain. It does have a misfortunate side-effect that now it has to be
accessed as "data.vmx[0]" rather than just "data.vmx".
Because we are already modifying these structs, I also modified the
following:
* Define the "format" field values as macros.
* Rename vmcs_pa to vmcs12_pa for better readability.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
[Remove SVM stubs, add KVM_STATE_NESTED_VMX_VMCS12_SIZE. - Paolo]
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend tc_flower to test plain ingress device matching and also
tc_shblock to test ingress device matching on shared block.
Add new tc_flower_router.sh where ingress device matching on egress
(after routing) is done.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases, compiler can allocate the same register for operand 'res'
and 'vecoutptr', resulting in segfault at 'stxvd2x 40,0,%[vecoutptr]'
because base register will contain 1, yielding a false-positive.
This is because output 'res' must be marked as an earlyclobber operand so
it may not overlap an input operand ('vecoutptr').
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a bunch of loop tests. Most of them are created by replacing
'#pragma unroll' with '#pragma clang loop unroll(disable)'
Several tests are artificially large:
/* partial unroll. llvm will unroll loop ~150 times.
* C loop count -> 600.
* Asm loop count -> 4.
* 16k insns in loop body.
* Total of 5 such loops. Total program size ~82k insns.
*/
"./pyperf600.o",
/* no unroll at all.
* C loop count -> 600.
* ASM loop count -> 600.
* ~110 insns in loop body.
* Total of 5 such loops. Total program size ~1500 insns.
*/
"./pyperf600_nounroll.o",
/* partial unroll. 19k insn in a loop.
* Total program size 20.8k insn.
* ~350k processed_insns
*/
"./strobemeta.o",
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This set of tests is a rewrite of Edward's earlier tests:
https://patchwork.ozlabs.org/patch/877221/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fix tests that incorrectly assumed that the verifier
cannot track constants through stack.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add const qualifiers to bpf_object/bpf_program/bpf_map arguments for
getter APIs. There is no need for them to not be const pointers.
Verified that
make -C tools/lib/bpf
make -C tools/testing/selftests/bpf
make -C tools/perf
all build without warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We were renanimg 'main' to 'main_zstd' but then using 'main_libzstd();'
in the main() for test-all.c, causing this:
$ cat /tmp/build/perf/feature/test-all.make.output
test-all.c: In function ‘main’:
test-all.c:236:2: error: implicit declaration of function ‘main_test_libzstd’; did you mean ‘main_test_zstd’? [-Werror=implicit-function-declaration]
main_test_libzstd();
^~~~~~~~~~~~~~~~~
main_test_zstd
cc1: all warnings being treated as errors
$
I.e. what was supposed to be the fast path feature test was _always_
failing, duh, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Fixes: 3b1c5d9659 ("tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines")
Link: https://lkml.kernel.org/n/tip-ma4abk0utroiw4mwpmvnjlru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some distros slang.h may be in a /usr/include 'slang' subdir, so use
the if slang is not explicitely disabled (by using NO_SLANG=1) and its
feature test for the common case (having /usr/include/slang.h) failed,
use the results for the test that checks if it is in slang/slang.h.
Change the only file in perf that includes slang.h to use
HAVE_SLANG_INCLUDE_SUBDIR and forget about this for good.
On a rhel6 system now we have:
$ /tmp/build/perf/perf -vv | grep slang
libslang: [ on ] # HAVE_SLANG_SUPPORT
$ ldd /tmp/build/perf/perf | grep libslang
libslang.so.2 => /usr/lib64/libslang.so.2 (0x00007fa2d5a8d000)
$ grep slang /tmp/build/perf/FEATURE-DUMP
feature-libslang=0
feature-libslang-include-subdir=1
$ cat /etc/redhat-release
CentOS release 6.10 (Final)
$
While on fedora:29:
$ /tmp/build/perf/perf -vv | grep slang
libslang: [ on ] # HAVE_SLANG_SUPPORT
$ ldd /tmp/build/perf/perf | grep slang
libslang.so.2 => /lib64/libslang.so.2 (0x00007f8eb11a7000)
$ grep slang /tmp/build/perf/FEATURE-DUMP
feature-libslang=1
feature-libslang-include-subdir=1
$
$ cat /etc/fedora-release
Fedora release 29 (Twenty Nine)
$
The feature-libslang-include-subdir=1 line is because the 'gettid()'
test was added to test-all.c as the new glibc has an implementation for
that, so we soon should have it not failing, i.e. should be the common
case soon. Perhaps I should move it out till it becomes the norm...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1955c8cf5e ("perf tools: Don't hardcode host include path for libslang")
Link: https://lkml.kernel.org/n/tip-bkgtpsu3uit821fuwsdhj9gd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A few odd old distros (rhel5, 6, yeah, lots of those out in use, in many
cases we want to use upstream perf on it) have the slang header files in
/usr/include/slang/, so add a test that will be performed only when
test-all.c (the one with the most common sane settings) fails, either
because we're in one of these odd distros with slang/slang.h or because
something else failed (say libelf is not present).
So for the common case nothing changes, no additional test is performed.
Next step is to check in perf the result of these tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1955c8cf5e ("perf tools: Don't hardcode host include path for libslang")
Link: https://lkml.kernel.org/n/tip-2sy7hbwkx68jr6n97qxgg0c6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that the offload indication for unicast routes is correctly set in
different scenarios. IPv4 support will be added in the future.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the test cases for checking compressed firmware load.
Two more cases are added to fw_filesystem.sh:
- Both a plain file and an xz file are present, and load the former
- Only an xz file is present, and load without '.xz' suffix
The tests are enabled only when CONFIG_FW_LOADER_COMPRESS is enabled
and xz program is installed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"git diff" says:
\ No newline at end of file
after modifying the file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that failure on any individual test results in an overall
failure of the test script.
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Audit tests count the total number of messages sent and compares
with total number of CMSG received on error queue. Example:
udp gso zerocopy timestamp audit
udp rx: 1599 MB/s 1166414 calls/s
udp tx: 1615 MB/s 27395 calls/s 27395 msg/s
udp rx: 1634 MB/s 1192261 calls/s
udp tx: 1633 MB/s 27699 calls/s 27699 msg/s
udp rx: 1633 MB/s 1191358 calls/s
udp tx: 1631 MB/s 27678 calls/s 27678 msg/s
Summary over 4.000 seconds...
sum udp tx: 1665 MB/s 82772 calls (27590/s) 82772 msgs (27590/s)
Tx Timestamps: 82772 received 0 errors
Zerocopy acks: 82772 received
Errors are thrown if CMSG count does not equal send count,
example:
Summary over 4.000 seconds...
sum tcp tx: 7451 MB/s 493706 calls (123426/s) 493706 msgs (123426/s)
./udpgso_bench_tx: Unexpected number of Zerocopy completions: 493706 expected 493704 received
Also reduce individual test time from 4 to 3 seconds so that
overall test time does not increase significantly.
v3: Enhancements as per Willem de Bruijn <willemb@google.com>
- document -P option for TCP audit
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This enhancement adds options that facilitate load testing with
additional TX CMSG options, and to optionally print results of
various send CMSG operations.
These options are especially useful in isolating situations
where error-queue messages are lost when combined with other
CMSG operations (e.g. SO_ZEROCOPY).
New options:
-a - count all CMSG messages and match to sent messages
-T - add TX CMSG that requests TX software timestamps
-H - similar to -T except request TX hardware timestamps
-P - call poll() before reading error queue
-v - print detailed results
v2: Enhancements as per Willem de Bruijn <willemb@google.com>
- Updated control and buffer parameters for recvmsg
- poll() parameter cleanup
- fail on bad audit results
- remove TOS options
- improved reporting
v3: Enhancements as per Willem de Bruijn <willemb@google.com>
- add SOF_TIMESTAMPING_OPT_TSONLY to eliminate MSG_TRUNC
- general code cleanup
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This exercises kernel code path that deal with addresses that have
a limited lifetime.
Without previous fix, this triggers following crash on net-next:
BUG: KASAN: null-ptr-deref in check_lifetime+0x403/0x670
Read of size 8 at addr 0000000000000010 by task kworker [..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
Convert a bulk of selftests that have maps with custom (not integer) key
and/or value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Switch tests that already rely on BTF to BTF-defined map definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add file test for BTF-defined map definition.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support for a new way to define BPF maps. It relies on
BTF to describe mandatory and optional attributes of a map, as well as
captures type information of key and value naturally. This eliminates
the need for BPF_ANNOTATE_KV_PAIR hack and ensures key/value sizes are
always in sync with the key/value type.
Relying on BTF, this approach allows for both forward and backward
compatibility w.r.t. extending supported map definition features. By
default, any unrecognized attributes are treated as an error, but it's
possible relax this using MAPS_RELAX_COMPAT flag. New attributes, added
in the future will need to be optional.
The outline of the new map definition (short, BTF-defined maps) is as follows:
1. All the maps should be defined in .maps ELF section. It's possible to
have both "legacy" map definitions in `maps` sections and BTF-defined
maps in .maps sections. Everything will still work transparently.
2. The map declaration and initialization is done through
a global/static variable of a struct type with few mandatory and
extra optional fields:
- type field is mandatory and specified type of BPF map;
- key/value fields are mandatory and capture key/value type/size information;
- max_entries attribute is optional; if max_entries is not specified or
initialized, it has to be provided in runtime through libbpf API
before loading bpf_object;
- map_flags is optional and if not defined, will be assumed to be 0.
3. Key/value fields should be **a pointer** to a type describing
key/value. The pointee type is assumed (and will be recorded as such
and used for size determination) to be a type describing key/value of
the map. This is done to save excessive amounts of space allocated in
corresponding ELF sections for key/value of big size.
4. As some maps disallow having BTF type ID associated with key/value,
it's possible to specify key/value size explicitly without
associating BTF type ID with it. Use key_size and value_size fields
to do that (see example below).
Here's an example of simple ARRAY map defintion:
struct my_value { int x, y, z; };
struct {
int type;
int max_entries;
int *key;
struct my_value *value;
} btf_map SEC(".maps") = {
.type = BPF_MAP_TYPE_ARRAY,
.max_entries = 16,
};
This will define BPF ARRAY map 'btf_map' with 16 elements. The key will
be of type int and thus key size will be 4 bytes. The value is struct
my_value of size 12 bytes. This map can be used from C code exactly the
same as with existing maps defined through struct bpf_map_def.
Here's an example of STACKMAP definition (which currently disallows BTF type
IDs for key/value):
struct {
__u32 type;
__u32 max_entries;
__u32 map_flags;
__u32 key_size;
__u32 value_size;
} stackmap SEC(".maps") = {
.type = BPF_MAP_TYPE_STACK_TRACE,
.max_entries = 128,
.map_flags = BPF_F_STACK_BUILD_ID,
.key_size = sizeof(__u32),
.value_size = PERF_MAX_STACK_DEPTH * sizeof(struct bpf_stack_build_id),
};
This approach is naturally extended to support map-in-map, by making a value
field to be another struct that describes inner map. This feature is not
implemented yet. It's also possible to incrementally add features like pinning
with full backwards and forward compatibility. Support for static
initialization of BPF_MAP_TYPE_PROG_ARRAY using pointers to BPF programs
is also on the roadmap.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Libbpf does sanitization of BTF before loading it into kernel, if kernel
doesn't support some of newer BTF features. This removes some of the
important information from BTF (e.g., DATASEC and VAR description),
which will be used for map construction. This patch splits BTF
processing into initialization step, in which BTF is initialized from
ELF and all the original data is still preserved; and
sanitization/loading step, which ensures that BTF is safe to load into
kernel. This allows to use full BTF information to construct maps, while
still loading valid BTF into older kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To support maps to be defined in multiple sections, it's important to
identify map not just by offset within its section, but section index as
well. This patch adds tracking of section index.
For global data, we record section index of corresponding
.data/.bss/.rodata ELF section for uniformity, and thus don't need
a special value of offset for those maps.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
User and global data maps initialization has gotten pretty complicated
and unnecessarily convoluted. This patch splits out the logic for global
data map and user-defined map initialization. It also removes the
restriction of pre-calculating how many maps will be initialized,
instead allowing to keep adding new maps as they are discovered, which
will be used later for BTF-defined map definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Simplify ELF parsing logic by exiting early, as there is no common clean
up path to execute. That makes it unnecessary to track when err was set
and when it was cleared. It also reduces nesting in some places.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As a preparation for adding BTF-based BPF map loading, extract .BTF and
.BTF.ext loading logic.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Multiple files in libbpf redefine their own definitions for min/max.
Let's define them in libbpf_internal.h and use those everywhere.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Hardcoding /usr/include/slang is fundamentally incompatible with cross
compilation and will lead to the inability for a cross-compiled
environment to properly detect whether slang is available or not.
If /usr/include/slang is necessary that is a distribution specific
knowledge that could be solved with either a standard pkg-config .pc
file (which slang has) or simply overriding CFLAGS accordingly, but the
default perf Makefile should be clean of all of that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Stanislav Fomichev <sdf@google.com>
Fixes: ef7b93a119 ("perf report: Librarize the annotation code and use it in the newt browser")
Link: http://lkml.kernel.org/r/20190614183949.5588-1-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In which case it simply returns "unknown", like when it can't figure out
the evsel->name value.
This makes this code more robust and fixes a problem in 'perf trace'
where a NULL evsel was being passed to a routine that only used the
evsel for printing its name when a invalid syscall id was passed.
Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't just add the consumed bytes to the arg->augmented.args member,
as it is not void *, so it will access (consumed * sizeof(struct augmented_arg))
in the next augmented arg, totally wrong, cast the member to void pointe
before adding the number of bytes consumed, duh.
With this and hardcoding handling the 'renameat' and 'renameat2'
syscalls in the tools/perf/examples/bpf/augmented_raw_syscalls.c eBPF
proggie, we get:
mv/24388 renameat2(AT_FDCWD, "/tmp/build/perf/util/.bpf-event.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.bpf-event.o.cmd", RENAME_NOREPLACE) = 0
mv/24394 renameat2(AT_FDCWD, "/tmp/build/perf/util/.perf-hooks.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.perf-hooks.o.cmd", RENAME_NOREPLACE) = 0
mv/24398 renameat2(AT_FDCWD, "/tmp/build/perf/util/.pmu-bison.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.pmu-bison.o.cmd", RENAME_NOREPLACE) = 0
mv/24401 renameat2(AT_FDCWD, "/tmp/build/perf/util/.expr-bison.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.expr-bison.o.cmd", RENAME_NOREPLACE) = 0
mv/24406 renameat2(AT_FDCWD, "/tmp/build/perf/util/.pmu.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.pmu.o.cmd", RENAME_NOREPLACE) = 0
mv/24407 renameat2(AT_FDCWD, "/tmp/build/perf/util/.pmu-flex.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.pmu-flex.o.cmd", RENAME_NOREPLACE) = 0
mv/24416 renameat2(AT_FDCWD, "/tmp/build/perf/util/.parse-events-flex.o.tmp", AT_FDCWD, "/tmp/build/perf/util/.parse-events-flex.o.cmd", RENAME_NOREPLACE) = 0
I.e. it works with two string args in the same syscall.
Now back to taming the verifier...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 8195168e87 ("perf trace: Consume the augmented_raw_syscalls payload")
Link: https://lkml.kernel.org/n/tip-n1w59lpxks6m1le7fpo6rmyw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit 292c34c102 ("perf pmu: Fix core PMU alias list for X86
platform"), we fixed the issue of CPU events being aliased to uncore
events.
Fix this same issue for ARM64, since the said commit left the (broken)
behaviour untouched for ARM64.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: stable@vger.kernel.org
Fixes: 292c34c102 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/1560521283-73314-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p0kg493z2m8qizjbdefzip1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename the 'i' variable to 'nr_used' and use set 'nr_allocated' since
the start of this function, leaving the final assignment of the longer
named trace->ev_qualifier_ids.nr state to 'nr_used' at the end of the
function.
No change in behaviour intended.
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-kpgyn8xjdjgt0timrrnniquv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just skipping the syscalls not available in a particular
architecture without reflecting this in the number of entries in the
ev_qualifier_ids.nr variable, fix it.
This was done with the most minimalistic way, reusing the index variable
'i', a followup patch will further clean this by making 'i' renamed to
'nr_used' and using 'nr_allocated' in a few more places.
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Fixes: 04c41bcb86 ("perf trace: Skip unknown syscalls when expanding strace like syscall groups")
Link: https://lkml.kernel.org/r/20190613181514.GC1402@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Laura reported that the perf build failed in fedora when we got a glibc
that provides gettid(), which I reproduced using fedora rawhide with the
glibc-devel-2.29.9000-26.fc31.x86_64 package.
Add a feature check to avoid providing a gettid() helper in such
systems.
On a fedora rawhide system with this patch applied we now get:
[root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP
feature-gettid=1
[root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output
[root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin
linux-vdso.so.1 (0x00007ffc6b1f6000)
libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000)
/lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000)
[root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid
U gettid@@GLIBC_2.30
[root@7a5f55352234 perf]#
While on a fedora:29 system:
[acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP
feature-gettid=0
[acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output
test-gettid.c: In function ‘main’:
test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
return gettid();
^~~~~~
getgid
cc1: all warnings being treated as errors
[acme@quaco perf]$
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like other synthesized events, if there is also an Intel PT branch
trace, then a call stack can also be synthesized. Add that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add memory information from PEBS data in the Intel PT trace to the
synthesized PEBS sample. This provides sample types PERF_SAMPLE_ADDR,
PERF_SAMPLE_WEIGHT, and PERF_SAMPLE_TRANSACTION, but not
PERF_SAMPLE_DATA_SRC.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add LBR information from PEBS data in the Intel PT trace to the
synthesized PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add XMM register information from PEBS data in the Intel PT trace to the
synthesized PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add general purpose register information from PEBS data in the Intel PT
trace to the synthesized PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize a PEBS sample using basic information (ip, timestamp) only.
Other PEBS information will be added in later patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out common sample preparation for re-use when synthesizing PEBS
samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add infrastructure to prepare for synthesizing PEBS samples but leave
the actual synthesis to later patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PEBS data is encoded in Block Item Packets (BIP). Populate a new structure
intel_pt_blk_items with the values and, upon a Block End Packet (BEP),
report them as a new Intel PT sample type INTEL_PT_BLK_ITEMS.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 3 new packets to supports PEBS via PT, namely Block Begin Packet
(BBP), Block Item Packet (BIP) and Block End Packet (BEP). PEBS data is
encoded into multiple BIP packets that come between BBP and BEP. The BEP
packet might be associated with a FUP packet. That is indicated by using
a separate packet type (INTEL_PT_BEP_IP) similar to other packets types
with the _IP suffix.
Refer to the Intel SDM for more information about PEBS via PT:
https://software.intel.com/en-us/articles/intel-sdm
May 2019 version: Vol. 3B 18.5.5.2 PEBS output to Intel® Processor Trace
Decoding of BIP packets conflicts with single-byte TNT packets. Since
BIP packets only occur in the context of a block (i.e. between BBP and
BEP), that context must be recorded and passed to the packet decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call function cs_etm_set_option() once with all relevant options set
rather than multiple times to avoid going through the list of CPU more
than once.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190611204528.20093-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to subsequently add more tests for the arm64 architecture we
compile the tests target for arm64 systematically.
Further explanation provided by Mark Rutland:
Given prior questions regarding this commit, it's probably worth
spelling things out more explicitly, e.g.
Currently we only build the arm64/tests directory if
CONFIG_DWARF_UNWIND is selected, which is fine as the only test we
have is arm64/tests/dwarf-unwind.o.
So that we can add more tests to the test directory, let's
unconditionally build the directory, but conditionally build
dwarf-unwind.o depending on CONFIG_DWARF_UNWIND.
There should be no functional change as a result of this patch.
Signed-off-by: Raphael Gault <raphael.gault@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190611125315.18736-2-raphael.gault@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXP/1xQAKCRCyPKLppCJ+
J9xcAQCwOITAshE7op7HbKUPtkqiMNu+hpNa3skhxEpGHvKO0AEArpBXtuvEP8EU
PZsp+8vcVrlZ+dZutttgvkRz25mScg8=
=kfFb
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.3-20190611' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
One warning each on signedness, unused variable and return type.
Fixes: 10fbcdd12a ("selftests/net: add TFO key rotation selftest")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Added index upper bound test case
- Added mark upper bound test case
- Re-worded descriptions to few cases for clarity
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This macro $IP will be used in upcoming tc tests, which require
to create interfaces etc.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-06-15
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix stack layout of JITed x64 bpf code, from Alexei.
2) fix out of bounds memory access in bpf_sk_storage, from Arthur.
3) fix lpm trie walk, from Jonathan.
4) fix nested bpf_perf_event_output, from Matt.
5) and several other fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This config option makes only couple of lines optional.
Two small helpers and an int in couple of cls structs.
Remove the config option and always compile this in.
This saves the user from unexpected surprises when he adds
a filter with ingress device match which is silently ignored
in case the config option is not set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This lets us test that both BPF_PROG_TYPE_CGROUP_SOCK_ADDR and
BPF_PROG_TYPE_SOCK_OPS can access underlying bpf_sock.
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sk to struct bpf_sock_addr and struct bpf_sock_ops.
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a test for the new sockopt SO_REUSEPORT_DETACH_BPF.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
SO_DETACH_REUSEPORT_BPF is needed for the test in the next patch.
It is defined in the socket.h.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Kernel internally checks that either key or value type ID is specified,
before using btf_fd. Do the same in libbpf's map creation code for
determining when to retry map creation w/o BTF.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: fba01a0689 ("libbpf: use negative fd to specify missing BTF")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "len" variable needs to be signed for the error handling to work
properly.
Fixes: 596092ef8b ("selftests/bpf: enable all available cgroup v2 controllers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Convert the cgroup-v1 files to ReST format, in order to
allow a later addition to the admin-guide.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
XCMhQ9s=
=cb80
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc4' into mauro
We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
Test the PTP Physical Hardware Clock functionality using the "phc_ctl" (a
part of "linuxptp").
The test contains three sub-tests:
* "settime" test
* "adjtime" test
* "adjfreq" test
"settime" test:
* set the PHC time to 0 seconds.
* wait for 120.5 seconds.
* check if PHC time equal to 120.XX seconds.
"adjtime" test:
* set the PHC time to 0 seconds.
* adjust the time by 10 seconds.
* check if PHC time equal to 10.XX seconds.
"adjfreq" test:
* adjust the PHC frequency to be 1% faster.
* set the PHC time to 0 seconds.
* wait for 100.5 seconds.
* check if PHC time equal to 101.XX seconds.
Usage:
$ ./phc.sh /dev/ptp<X>
It is possible to run a subset of the tests, for example:
* To run only the "settime" test:
$ TESTS="settime" ./phc.sh /dev/ptp<X>
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extended fw TDC tests with use cases where actions are pre-created and
attached to a filter by reference, i.e. by action index.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Logan noticed that devm_memremap_pages_release() kills the percpu_ref
drops all the page references that were acquired at init and then
immediately proceeds to unplug, arch_remove_memory(), the backing pages
for the pagemap. If for some reason device shutdown actually collides
with a busy / elevated-ref-count page then arch_remove_memory() should
be deferred until after that reference is dropped.
As it stands the "wait for last page ref drop" happens *after*
devm_memremap_pages_release() returns, which is obviously too late and
can lead to crashes.
Fix this situation by assigning the responsibility to wait for the
percpu_ref to go idle to devm_memremap_pages() with a new ->cleanup()
callback. Implement the new cleanup callback for all
devm_memremap_pages() users: pmem, devdax, hmm, and p2pdma.
Link: http://lkml.kernel.org/r/155727339156.292046.5432007428235387859.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 41e94a8513 ("add devm_memremap_pages")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quoting Paul [1]:
"Given that a quick (and perhaps error-prone) search of the uses
of rcu_assign_pointer() in v5.1 didn't find a single use of the
return value, let's please instead change the documentation and
implementation to eliminate the return value."
[1] https://lkml.kernel.org/r/20190523135013.GL28207@linux.ibm.com
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: rcu@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If the result of the division is LLONG_MIN, current tests do not detect
the error since the return value is truncated to a 32-bit value and ends
up being 0.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sync the changes to the flags made in "bpf: simplify definition of
BPF_FIB_LOOKUP related flags" with the BPF UAPI headers.
Doing in a separate commit to ease syncing of github/libbpf.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When the ntb_msi_test module is available, the test code will trigger
each of the interrupts and ensure the corresponding occurrences files
gets incremented.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This cpupower update for Linux 5.2-rc6 consists of a fix and a minor
spelling correction.
-----BEGIN PGP SIGNATURE-----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=Om11
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates from Shuah Khan:
"This cpupower update consists of a fix and a minor spelling correction."
* tag 'linux-cpupower-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower : frequency-set -r option misses the last cpu in related cpu list
cpupower: correct spelling of interval
This merges a fix for a bug in our context id handling on 64-bit hash
CPUs.
The fix was written against v5.1 to ease backporting to stable
releases. Here we are merging it up to a v5.2-rc2 base, which involves
a bit of manual resolution.
It also adds a test case for the bug.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This tests that when a process with a mapping above 512TB forks we
correctly separate the parent and child address spaces. This exercises
the bug in the context id handling fixed in the previous commit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test that IPv4 and IPv6 nexthops are correctly marked with offload
indication in response to neighbour events.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that route exceptions can be successfully listed and
flushed using ip -6 route {list,flush} cache.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the leftmost parent node of the tree has does not have a child
on the left side, then trie_get_next_key (and bpftool map dump) will
not look at the child on the right. This leads to the traversal
missing elements.
Lookup is not affected.
Update selftest to handle this case.
Reproducer:
bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \
value 1 entries 256 name test_lpm flags 1
bpftool map update pinned /sys/fs/bpf/lpm key 8 0 0 0 0 0 value 1
bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0 0 128 value 2
bpftool map dump pinned /sys/fs/bpf/lpm
Returns only 1 element. (2 expected)
Fixes: b471f2f1de ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use the newly added bpf_num_possible_cpus() in bpftool and selftests
and remove duplicate implementations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Though currently there is no problem including bpf_util.h in kernel
space BPF C programs, in next patch in this stack, I will reuse
libbpf_num_possible_cpus() in bpf_util.h thus include libbpf.h in it,
which will cause BPF C programs compile error. Therefore I will first
remove bpf_util.h from all test BPF programs.
This can also make it clear that bpf_util.h is a user-space utility
while bpf_helpers.h is a kernel space utility.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding a new API libbpf_num_possible_cpus() that helps user with
per-CPU map operations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
An error "implicit declaration of function 'reallocarray'" can be thrown
with the following steps:
$ cd tools/testing/selftests/bpf
$ make clean && make CC=<Path to GCC 4.8.5>
$ make clean && make CC=<Path to GCC 7.x>
The cause is that the feature folder generated by GCC 4.8.5 is not
removed, leaving feature-reallocarray being 1, which causes reallocarray
not defined when re-compliing with GCC 7.x. This diff adds feature
folder to EXTRA_CLEAN to avoid this problem.
v2: Rephrase the commit message.
Signed-off-by: Hechao Li <hechaol@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix signature of bpf_probe_read and bpf_probe_write_user to mark source
pointer as const. This causes warnings during compilation for
applications relying on those helpers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the recent change to XSKMAP bpf_map_lookup_elem() to test if
there is a xsk present in the map instead of duplicating the work
with qidconf.
Fix things so callers using XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD
bypass any internal bpf maps, so xsk_socket__{create|delete} works
properly.
Clean up error handling path.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that bpf_map_lookup_elem lookup and structure
access operats correctly.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync uapi/linux/bpf.h
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the AF_XDP code uses a separate map in order to
determine if an xsk is bound to a queue. Instead of doing this,
have bpf_map_lookup_elem() return a xdp_sock.
Rearrange some xdp_sock members to eliminate structure holes.
Remove selftest - will be added back in later patch.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We have $INSTALL_DIR/share/perf-core/strace/groups/string files with
syscalls that should be selected when 'string' is used, meaning, in this
case, syscalls that receive as one of its arguments a string, like a
pathname.
But those were first selected and tested on x86_64, and end up failing
in architectures where some of those syscalls are not available, like
the 'access' syscall on arm64, which makes using 'perf trace -e string'
in such archs to fail.
Since this the routine doing the validation is used only when reading
such files, do not fail when some syscall is not found in the
syscalltbl, instead just use pr_debug() to register that in case people
are suspicious of problems.
Now using 'perf trace -e string' should work on arm64, selecting only
the syscalls that have a string and are available on that architecture.
Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/r/20190610184754.GU21245@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf report fails to display s390 specific event numbered bd000
on an x86 platform. For example on s390 this works without error:
[root@m35lp76 perf]# uname -m
s390x
[root@m35lp76 perf]# ./perf record -e rbd000 -- find / >/dev/null
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.549 MB perf.data ]
[root@m35lp76 perf]# ./perf report -D --stdio > /dev/null
[root@m35lp76 perf]#
Transfering this perf.data file to an x86 platform and executing
the same report command produces:
[root@f29 perf]# uname -m
x86_64
[root@f29 perf]# ./perf report -i ~/perf.data.m35lp76 --stdio
interpreting bpf_prog_info from systems with endianity is not yet supported
interpreting btf from systems with endianity is not yet supported
0x8c890 [0x8]: failed to process type: 68
Error:
failed to process sample
Event bd000 generates auxiliary data which is stored in big endian
format in the perf data file.
This error is caused by missing endianess handling on the x86 platform
when the data is displayed. Fix this by handling s390 auxiliary event
data depending on the local platform endianness.
Output after on x86:
[root@f29 perf]# ./perf report -D -i ~/perf.data.m35lp76 --stdio > /dev/null
interpreting bpf_prog_info from systems with endianity is not yet supported
interpreting btf from systems with endianity is not yet supported
[root@f29 perf]#
Committer notes:
Fix build breakage on older systems, such as CentOS:6 where using
nesting calls to the endian.h macros end up redefining local variables:
util/s390-cpumsf.c: In function 's390_cpumsf_trailer_show':
util/s390-cpumsf.c:333: error: declaration of '__v' shadows a previous local
util/s390-cpumsf.c:333: error: shadowed declaration is here
util/s390-cpumsf.c:333: error: declaration of '__x' shadows a previous local
util/s390-cpumsf.c:333: error: shadowed declaration is here
util/s390-cpumsf.c:334: error: declaration of '__v' shadows a previous local
util/s390-cpumsf.c:334: error: shadowed declaration is here
util/s390-cpumsf.c:334: error: declaration of '__x' shadows a previous local
util/s390-cpumsf.c:334: error: shadowed declaration is here
[perfbuilder@455a63ef60dc perf]$ gcc -v |& tail -1
gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC)
[perfbuilder@455a63ef60dc perf]$
Since there are several uses of
be64toh(te->flags)
Introduce a variable to hold that and then use it, avoiding this case
that causes the above problems:
- local.bsdes = be16toh((be64toh(te->flags) >> 16 & 0xffff));
+ local.bsdes = be16toh((flags >> 16 & 0xffff));
Its the same construct used in s390_cpumsf_diag_show() where we have a
'word' variable that is used just once, s390_cpumsf_basic_show() has
lots of uses and also uses a variable to hold the result of be16toh().
Some of those temp variables needed to be converted from 'unsigned long'
to 'unsigned long long' so as to build on 32-bit arches such as
debian:experimental-x-mipsel, the android NDK ones and
fedora:24-x-ARC-uClibc.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522064325.25596-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Debugging a OOM error using the TUI interface revealed this issue
on s390:
[tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort
....
00000001119b7158 B radix_tree_node_cachep
00000001119b8000 B __bss_stop
00000001119b8000 B _end
000003ff80002850 t autofs_mount [autofs4]
000003ff80002868 t autofs_show_options [autofs4]
000003ff80002a98 t autofs_evict_inode [autofs4]
....
There is a huge gap between the last kernel symbol
__bss_stop/_end and the first kernel module symbol
autofs_mount (from autofs4 module).
After reading the kernel symbol table via functions:
dso__load()
+--> dso__load_kernel_sym()
+--> dso__load_kallsyms()
+--> __dso_load_kallsyms()
+--> symbols__fixup_end()
the symbol __bss_stop has a start address of 1119b8000 and
an end address of 3ff80002850, as can be seen by this debug statement:
symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850
The size of symbol __bss_stop is 0x3fe6e64a850 bytes!
It is the last kernel symbol and fills up the space until
the first kernel module symbol.
This size kills the TUI interface when executing the following
code:
process_sample_event()
hist_entry_iter__add()
hist_iter__report_callback()
hist_entry__inc_addr_samples()
symbol__inc_addr_samples(symbol = __bss_stop)
symbol__cycles_hist()
annotated_source__alloc_histograms(...,
symbol__size(sym),
...)
This function allocates memory to save sample histograms.
The symbol_size() marco is defined as sym->end - sym->start, which
results in above value of 0x3fe6e64a850 bytes and
the call to calloc() in annotated_source__alloc_histograms() fails.
The histgram memory allocation might fail, make this failure
no-fatal and continue processing.
Output before:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
-i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
__symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop,
start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850,
func: 0
problem adding hist entry, skipping event
0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory]
[tmricht@m83lp54 perf]$
Output after:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
-i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850
symbol__hists notes->src:0x2aa2a70 nr_hists:1
symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70
__symbol__inc_addr_samples: addr=0x11094c69e
0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0]
=> nr_samples: 1, period: 526008
[tmricht@m83lp54 perf]$
There is no error about failed memory allocation and the TUI interface
shows all entries.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command
# perf test -Fv 6
fails with error
running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse
event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint'
event syntax error: 'kvm-s390:kvm_s390_create_vm'
\___ unknown tracepoint
when the kvm module is not loaded or not built in.
Fix this by adding a valid function which tests if the module
is loaded. Loaded modules (or builtin KVM support) have a
directory named
/sys/kernel/debug/tracing/events/kvm-s390
for this tracepoint.
Check for existence of this directory.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently only a single explicit time range is accepted. Add support for
multiple ranges separated by spaces, which requires the string to be
quoted. Update the time utils test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test time ranges work as expected.
Committer testing:
$ perf test "time utils"
59: time utils : Ok
$ perf test -v "time utils"
59: time utils :
--- start ---
test child forked, pid 31711
parse_nsec_time("0")
0
parse_nsec_time("1")
1000000000
parse_nsec_time("0.000000001")
1
parse_nsec_time("1.000000001")
1000000001
parse_nsec_time("123456.123456")
123456123456000
parse_nsec_time("1234567.123456789")
1234567123456789
parse_nsec_time("18446744073.709551615")
18446744073709551615
perf_time__parse_str("1234567.123456789,1234567.123456789")
start time 1234567123456789, end time 1234567123456789
perf_time__parse_str("1234567.123456789,1234567.123456790")
start time 1234567123456789, end time 1234567123456790
perf_time__parse_str("1234567.123456789,")
start time 1234567123456789, end time 0
perf_time__parse_str(",1234567.123456789")
start time 0, end time 1234567123456789
perf_time__parse_str("0,1234567.123456789")
start time 0, end time 1234567123456789
perf_time__parse_for_ranges("1234567.123456789,1234567.123456790")
start time 1234567123456789, end time 1234567123456790
perf_time__parse_for_ranges("10%/1")
first_sample_time 7654321000000000 last_sample_time 7654321000000100
start time 0: 7654321000000000, end time 0: 7654321000000009
perf_time__parse_for_ranges("10%/2")
first_sample_time 7654321000000000 last_sample_time 7654321000000100
start time 0: 7654321000000010, end time 0: 7654321000000019
perf_time__parse_for_ranges("10%/1,10%/2")
first_sample_time 11223344000000000 last_sample_time 11223344000000100
start time 0: 11223344000000000, end time 0: 11223344000000009
start time 1: 11223344000000010, end time 1: 11223344000000019
perf_time__parse_for_ranges("10%/1,10%/3,10%/10")
first_sample_time 11223344000000000 last_sample_time 11223344000000100
start time 0: 11223344000000000, end time 0: 11223344000000009
start time 1: 11223344000000020, end time 1: 11223344000000029
start time 2: 11223344000000090, end time 2: 11223344000000100
test child finished with 0
---- end ----
time utils: Ok
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-19-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explicit time ranges never contain a percent sign whereas percentage
ranges always do, so it is possible to call the correct parser.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify perf_time__parse_for_ranges() error paths slightly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct some punctuation and spelling and correct the format to show
that the time resolution is nanoseconds not microseconds.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent percentage time range overlap. This is only a 1 nanosecond
change but makes the results more logical e.g. a sample cannot be in
both the first 10% and the second 20%.
Note, there is a later patch that adds a test for time-utils.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out set_percent_time() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, options allow only 1 explicit (non-percentage) time range.
In preparation for adding support for multiple explicit time ranges,
treat time ranges consistently.
Instead of treating some time ranges as inclusive and some as excluding
the end time, treat all time ranges as inclusive. This is only a 1
nanosecond change but is necessary to treat multiple explicit time
ranges in a consistent manner.
Note, there is a later patch that adds a test for time-utils.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set up time ranges for efficient time interval filtering using the new
"fast forward" facility.
Because decoding is done in time order, intel_pt_time_filter() needs to
look only at the next start or end timestamp - refer intel_pt_next_time().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement the lookahead callback to let the decoder access subsequent
buffers. intel_pt_lookahead() manages the buffer lifetime and calls the
decoder for each buffer until the decoder returns a non-zero value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out intel_pt_get_buffer() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT decoding is done in time order. In order to support efficient time
interval filtering, add a facility to "fast forward" towards a particular
timestamp. That involves finding the right buffer, stepping to that buffer,
and then stepping forward PSBs. Because decoding must begin at a PSB,
"fast forward" stops at the last PSB that has a timestamp before the target
timestamp.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the decoder gets the next trace buffer, some state is reset if the
buffer is not consecutive to the previous buffer. Add a parameter
'reposition' so that can be done also to support a "fast forward"
facility.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out intel_pt_reposition() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out intel_pt_8b_tsc() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a callback function to enable the decoder to lookahead at subsequent
trace buffers. This will be used to implement a "fast forward" facility
which will be needed to support efficient time interval filtering.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction trace decoders can optimize output based on what time
intervals will be filtered, so pass that information in
itrace_synth_ops.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190604130017.31207-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The clang bpf cmdline template has defined default value in the file
tools/perf/util/llvm-utils.c, which has been changed for several times.
This patch updates the documentation to reflect the latest default value
for the configuration llvm.clang-bpf-cmd-template.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: d35b168c3d ("perf bpf: Give precedence to bpf header dir")
Fixes: cb76371441 ("perf llvm: Allow passing options to llc in addition to clang")
Fixes: 1b16fffa38 ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20190607143508.18141-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suzuki noticed that this should be more useful in a generic header, and
after looking I noticed we have it already in our copy of
include/linux/bits.h in tools/include, so just use it, test built on
x86-64 and ubuntu 19.04 with:
perfbuilder@46646c9e848e:/$ aarch64-linux-gnu-gcc --version |& head -1
aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
perfbuilder@46646c9e848e:/$
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/r/68c1c548-33cd-31e8-100d-7ffad008c7b2@arm.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org,
Link: https://lkml.kernel.org/n/tip-69pd3mqvxdlh2shddsc7yhyv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the necessary intelligence to properly compute the value
of 'old' and 'head' when operating in snapshot mode. That way we can
get the latest information in the AUX buffer and be compatible with the
generic AUX ring buffer mechanic.
Tester notes:
> Leo, have you had the chance to test/review this one? Suzuki?
Sure. I applied this patch on the perf/core branch (with latest
commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading
filename to the loop') and passed testing with below steps:
# perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort &
[1] 19097
Bubble sorting array of 30000 elements
# kill -USR2 19097
# kill -USR2 19097
# kill -USR2 19097
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.753 MB perf.data ]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'die' info isn't in the same array as core and socket ids, and we
missed the 'dies' string list, that comes right after the 'core' +
'socket' id variable length array, followed by the VLA for the dies.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c9cb12c5ba08 ("perf header: Add die information in CPU topology")
Link: https://lkml.kernel.org/n/tip-nubi6mxp2n8ofvlx7ph6k3h6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing "thread_siblings" and "thread_siblings_list" attribute will
be deprecated.
Use the new CPU topology sysfs attributes, "core_cpus" and
"core_cpus_list", which are synonymous with the deprecated attributes.
Check the new name first. If not available, use the deprecated name to
be compatible with old kernel.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "sibling cores" actually shows the sibling CPUs of a socket. The
name "sibling cores" is very misleading.
Rename "sibling cores" to "sibling sockets"
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is useful to aggregate counts per die. E.g. Uncore becomes die-scope
on Xeon Cascade Lake-AP.
Introduce a new option "--per-die" to support per-die aggregation.
The global id for each core has been changed to socket + die id + core
id. The global id for each die is socket + die id.
Add die information for per-core aggregation. The output of per-core
aggregation will be changed from "S0-C0" to "S0-D0-C0". Any scripts
which rely on the output format of per-core aggregation probably be
broken.
For 'perf stat record/report', there is no die information when
processing the old perf.data. The per-die result will be the same as
per-socket.
Committer notes:
Renamed 'die' variable to 'die_id' to fix the build in some systems:
CC /tmp/build/perf/builtin-script.o
cc1: warnings being treated as errors
builtin-stat.c: In function 'perf_env__get_die':
builtin-stat.c:963: error: declaration of 'die' shadows a global declaration
util/util.h:19: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/.builtin-stat.o.tmp': No such file or directory
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-bsnhx7vgsuu6ei307mw60mbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the new CPUID.1F, a new level type of CPU topology, 'die', is
introduced. The 'die' information in CPU topology should be added in
perf header.
To be compatible with old perf.data, the patch checks the section size
before reading the die information. The new info is added at the end of
the cpu_topology section, the old perf tool ignores the extra data. It
never reads data crossing the section boundary.
The new perf tool with the patch can be used on legacy kernel. Add a new
function has_die_topology() to check if die topology information is
supported by kernel. The function only check X86 and CPU 0. Assuming
other CPUs have same topology.
Use similar method for core and socket to support die id and sibling
dies string.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no function to retrieve die id information of a given CPU.
Add cpu_map__get_die_id() to retrieve die id information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1559688644-106558-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for CPU-wide trace scenarios by correlating range packets
with timestamp packets. That way range packets received on different
ETMQ/traceID channels can be processed and synthesized in chronological
order.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-18-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch deals with timestamp packets received from the decoding
library in order to give the front end packet processing loop a handle
on the time instruction conveyed by range packets have been executed at.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-17-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link contextID packets received from the decoder with the perf tool
thread mechanic so that we know the specifics of the process currently
executing.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-16-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When operating in CPU-wide trace mode with a source/sink topology of N:1
packets with multiple traceID will end up in the same cs_etm_queue. In
order to properly decode packets they need to be split in different
queues, i.e one queue per traceID.
As such add support for multiple traceID per cs_etm_queue by adding a
new cs_etm_traceid_queue every time a new traceID is discovered in the
trace stream.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-15-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When working with CPU-wide traces different traceID may be found in the
same stream. As such we need to use the decoder callback that provides
the traceID in order to know the thread context being decoded.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-14-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tid/pid fields of structure cs_etm_queue are CPU dependent and as
such need to be part of the cs_etm_traceid_queue in order to support
CPU-wide trace scenarios.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-13-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread field of structure cs_etm_queue is CPU dependent and as such
need to be part of the cs_etm_traceid_queue in order to support CPU-wide
trace scenarios.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-12-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nowadays the synthesize code is using the packet's cpu information,
making cs_etm_queue::cpu useless. As such simply remove it.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-11-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In an ideal world there is one CPU per cs_etm_queue and as such, one
trace ID per cs_etm_queue. In the real world CoreSight topologies allow
multiple CPUs to use the same sink, which translates to multiple trace
IDs per cs_etm_queue.
To deal with this a new cs_etm_traceid_queue structure is introduced to
enclose all the information related to a single trace ID, allowing a
cs_etm_queue to handle traces generated by any number of CPUs.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-10-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder needs to work with more than one traceID queue if we want to
support CPU-wide scenarios with N:1 source/sink topologies. As such
move the packet buffer and related fields out of the decoder structure
and into the cs_etm_queue structure.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-8-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no point in having two different error goto statement since the
openCSD API to free a decoder handles NULL pointers. As such function
cs_etm_decoder__free() can be called to deal with all aspect of freeing
decoder memory.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-7-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add handling of SWITCH-CPU-WIDE events in order to add the tid/pid of
the incoming process to the perf tools machine infrastructure. This
information is later retrieved when a contextID packet is found in the
trace stream.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-6-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add handling of ITRACE events in order to add the tid/pid of the
executing process to the perf tools machine infrastructure. This
information is later retrieved when a contextID packet is found in the
trace stream.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-5-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ask the perf core to generate an event when processes are swapped in/out
of context. That way proper action can be taken by the decoding code
when faced with such event.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-4-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When operating in CPU-wide mode tracers need to generate timestamps in
order to correlate the code being traced on one CPU with what is executed
on other CPUs.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-3-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When operating in CPU-wide mode being notified of contextID changes is
required so that the decoding mechanic is aware of the process context
switch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190524173508.29044-2-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's already setup in the only caller of this method in
perf_evsel__open(), right before calling perf_evsel__alloc_fd(), no need
to do it again.
Also it's better to have it out of the function before we move it to
libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1k8lhyjxfk7o8v4g3r7eyjc9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One can just record callchains in the kernel or user space with this new
options.
We can use it together with "--all-kernel" options.
This two options is used just like print_stack(sys) or print_ustack(usr)
for systemtap.
Shown below is the usage of this new option combined with "--all-kernel"
options:
1. Configure all used events to run in kernel space and just collect
kernel callchains.
$ perf record -a -g --all-kernel --kernel-callchains
2. Configure all used events to run in kernel space and just collect
user callchains.
$ perf record -a -g --all-kernel --user-callchains
Committer notes:
Improved documentation to state that asking for kernel callchains really
is asking for excluding user callchains, and vice versa.
Further mentioned that using both won't get both, but nothing, as both
will be excluded.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1559222962-22891-1-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So perf_config() uses:
int ret = 0;
perf_config_set__for_each_entry(config_set, section, item) {
...
ret = fn();
if (ret < 0)
break;
}
return ret;
Expecting that that break will imediatelly go to function exit to return
that error value (ret).
The problem is that perf_config_set__for_each_entry() expands into two
nested for() loops, one traversing the sections in a config and the
second the items in each of those sections, so we have to change that
'break' to a goto label right before that final 'return ret'.
With that, for instance 'perf trace' now correctly bails out when a
event that is requested to be added via its 'trace.add_events'
~/.perfconfig entry gets rejected by the kernel BPF verifier:
# perf trace ls
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o'
\___ Kernel verifier blocks program loading
(add -v to see detail)
Run 'perf list' for a list of valid events
Error: wrong config key-value pair trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
While before it would continue and explode later, when trying to find
maps that would have been in place had that augmented_raw_syscalls.o
precompiled BPF proggie been accepted by the, humm, bast... rigorous
kernel BPF verifier 8-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 8a0a9c7e91 ("perf config: Introduce new init() and exit()")
Link: https://lkml.kernel.org/n/tip-qvqxfk9d0rn1l7lcntwiezrr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On my Juno board with ARM64 CPUs, perf trace command reports the eBPF
program building failure but the command will not exit and continue to
run. If we define an eBPF event in config file, the event will be
parsed with below flow:
perf_config()
`> trace__config()
`> parse_events_option()
`> parse_events__scanner()
`-> parse_events_parse()
`> parse_events_load_bpf()
`> llvm__compile_bpf()
Though the low level functions return back error values when detect eBPF
building failure, but parse_events_option() returns 1 for this case and
trace__config() passes 1 to perf_config(); perf_config() doesn't treat
the returned value 1 as failure and it continues to parse other
configurations. Thus the perf command continues to run even without
enabling eBPF event successfully.
This patch changes error handling in trace__config(), when it detects
failure it will return -1 rather than directly pass error value (1);
finally, perf_config() will directly bail out and perf will exit for
this case.
Committer notes:
Simplified the patch to just check directly the return of
parse_events_option() and it it is non-zero, change err from its initial
zero value to -1.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: ac96287cae ("perf trace: Allow specifying a set of events to add in perfconfig")
Link: https://lkml.kernel.org/n/tip-x4i63f5kscykfok0hqim3zma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a version of router_multipath.sh that uses nexthop objects for
routes.
Ido requested a version that does not cause regressions with mlxsw
testing since it does not support nexthop objects yet.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests where multiple FIB entries use the same nexthop object. Generate
per-cpu cached routes for each by running ping on each cpu, and then
generate exceptions unique to each prefix (remote host) with different
mtus.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a second pass to icmp_redirect.sh to use nexthop objects for
routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add routing setup using nexthop objects and repeat tests with
old and new routing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the route add commands to a new function called setup_routing_old.
The '_old' refers to the classic way of installing routes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the block of code that runs a test and prints the verdict to a
new function, run_test.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Mostly due to x86 and acpi conversion, several documentation
links are still pointing to the old file. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This document is used by multiple architectures:
$ echo $(git grep -l pkey_mprotect arch|cut -d'/' -f 2|sort|uniq)
alpha arm arm64 ia64 m68k microblaze mips parisc powerpc s390 sh sparc x86 xtensa
So, let's move it to the core book and adjust the links to it
accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This Kselftest second fixes update for Linux 5.2-rc4 consists of a single
fix for vm test build failure regression when it is built by itself.
-----BEGIN PGP SIGNATURE-----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=G2Eg
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"This consists of a single fix for a vm test build failure regression
when it is built by itself"
* tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: Fix test build failure when built by itself
Daniel Borkmann says:
====================
pull-request: bpf 2019-06-07
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
32-bits for alu32 ops, from Björn and Luke with selftests covering all
relevant BPF alu ops from Björn and Jiong.
2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
__udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
that skb->data is pointing to transport header, from Martin.
3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
workqueue, and a missing restore of sk_write_space when psock gets dropped,
from Jakub and John.
4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
breaks standard applications like DNS if reverse NAT is not performed upon
receive, from Daniel.
5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
fails to verify that the length of the tuple is long enough, from Lorenz.
6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
{un,}successful probe) as that is expected to be propagated as an fd to
load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
from Michal.
7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.
8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.
2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.
3) Fix UDP socket lookup wrt. VRF, from Tim Beale.
4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.
5) Memory leak on unload in RDS, from Zhu Yanjun.
6) sctp_process_init leak, from Neil HOrman.
7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...
Add cgroup/recvmsg{4,6} to test_section_names as well. Test run output:
# ./test_section_names
libbpf: failed to guess program type based on ELF section name 'InvAliD'
libbpf: supported section(type) names are: [...]
libbpf: failed to guess attach type based on ELF section name 'InvAliD'
libbpf: attachable section(type) names are: [...]
libbpf: failed to guess program type based on ELF section name 'cgroup'
libbpf: supported section(type) names are: [...]
libbpf: failed to guess attach type based on ELF section name 'cgroup'
libbpf: attachable section(type) names are: [...]
Summary: 38 PASSED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial patch to bpftool in order to complete enabling attaching programs
to BPF_CGROUP_UDP{4,6}_RECVMSG.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Another trivial patch to libbpf in order to enable identifying and
attaching programs to BPF_CGROUP_UDP{4,6}_RECVMSG by section name.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync BPF uapi header in order to pull in BPF_CGROUP_UDP{4,6}_RECVMSG
attach types. This is done and preferred as an extra patch in order
to ease sync of libbpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vm test build fails when test is built by itself using
make -C tools/testing/selftests/vm
or
cd tools/testing/selftests/vm; make
When the test is built invoking its Makefile directly, it defines
OUTPUT which conflicts with lib.mk's logic to install headers.
make --no-builtin-rules INSTALL_HDR_PATH=$OUTPUT/usr \
ARCH=x86 -C ../../../.. headers_install
make[1]: Entering directory '/mnt/data/lkml/linux_5.2'
REMOVE shmparam.h
rm: cannot remove '/usr/include/asm-generic/shmparam.h': Permission denied
scripts/Makefile.headersinst:96: recipe for target '/usr/include/asm-generic/.install' failed
make[3]: *** [/usr/include/asm-generic/.install] Error 1
scripts/Makefile.headersinst:32: recipe for target 'asm-generic' failed
make[2]: *** [asm-generic] Error 2
Makefile:1199: recipe for target 'headers_install' failed
make[1]: *** [headers_install] Error 2
make[1]: Leaving directory '/mnt/data/lkml/linux_5.2'
../lib.mk:52: recipe for target 'khdr' failed
make: *** [khdr] Error 2
Fixes: 8ce72dc325 ("selftests: fix headers_install circular dependency")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kselftest update for Linux 5.2-rc4 consists of
- Alex Shi's fixes to cgroup tests
- Alakesh Haloi's fix to userfaultfd compiler warning
- Naresh Kamboju's fix to vm install to include test script to run
the test.
-----BEGIN PGP SIGNATURE-----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=9KtO
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- fixes to cgroup tests (Alex Shi)
- fix to userfaultfd compiler warning (Alakesh Haloi)
- fix to vm install to include test script to run the test (Naresh
Kamboju)
* tag 'linux-kselftest-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: install test_vmalloc.sh for run_vmtests
userfaultfd: selftest: fix compiler warning
kselftest/cgroup: fix incorrect test_core skip
kselftest/cgroup: fix unexpected testing failure on test_core
kselftest/cgroup: fix unexpected testing failure on test_memcontrol
Liran Alon