The end signature was defined in wakeup_asm.S as it originally came
from the ACPI wakeup code. However, we rely on the existence of the
.signature section to expand .bss, otherwise we would have to include
code to explicitly zero the .bss depending on the configuration.
Since the expanded .bss is just in .init.data anyway, it's easier to
always have it expanded.
This fixes failures when compiled without CONFIG_ACPI_SLEEP.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Change EFER to be a single u64 field instead of two u32 fields; change
the order to maintain alignment. Note that on x86-64 cr4 is really
also a 64-bit quantity, although we can only set the low 32 bits from
the trampoline code since it is still executing in 32-bit mode at that
point.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Keep all the realmode code together, including initialization (only
the rm/ subdirectory is actually built as real-mode code, anyway.)
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Move the bits that aren't actually common out of trampoline_common.S
and into the arch-specific files. Furthermore, make sure the page
directory is first in the .bss section for trampoline_64.S in order to
not waste an entire page of memory.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Before the new real-mode code infrastructure %edx was
used for testing CD and NW bits with andl in order to
decide whether to flush the processor caches or not.
The value of cr0 was also stored in %eax, which was
later used to set cr0 after masking out lower byte
(except TS bit) in order to enter real-mode.
In the new real-mode code infrastructure we wanted to
keep input parameter in %eax so we are using %edx for
both cr0 cases. This has caused regression since andl
overwrites the value of %edx.
This patch fixes the issue by replacing andl with testl,
which is essentially andl without writing result to the
register.
Special thanks to Paolo Bonzini for noting this and
proposing a fix.
Reported-and-tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336633898-23743-1-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Real-mode binary was built twice. This patch fixes
the issue by making realmode.relocs as target for
realmode.bin.
[ hpa: removed the direct dependency on realmode.relocs in
arch/x86/realmode/Makefile ]
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336595106-21135-1-git-send-email-jarkko.sakkinen@intel.com
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Moved relocs tool from scripts/ to arch/x86/tools because
it is architecture specific script. Added new target archscripts
that can be used to build scripts needed building an architecture.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-22-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Added header for trampoline code that can be used to supply
input data to it. This makes interface between real mode code
and kernel cleaner and simpler. Replaced two confusing pointers
to level4 pgt in trampoline_64.S with a single pointer to the
beginning of the page table.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-21-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Simplified hierarchy under rm directory to a flat
directory because it is not anymore really justified
to have own directory for wakeup code. It only adds
more complexity.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-20-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
There were number of issues in wakeup sequence:
- Wakeup stack was placed in hardcoded address.
- NX bit in EFER was not enabled.
- Initialization incorrectly set physical address
of secondary_startup_64.
- Some alignment issues.
This patch fixes these issues and in addition:
- Unifies coding conventions in .S files.
- Sets alignments of code and data right.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-18-git-send-email-jarkko.sakkinen@intel.com
Originally-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Move trampoline_*.S earlier in the link order so it ends up being
first in the text segment; since the SIPI vector requires 4K alignment
it otherwise ends up padding the .text segment with that much
completely unnecessarily.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-16-git-send-email-jarkko.sakkinen@intel.com
We cannot code an ljmpw to the real-mode segment directly, because gas
refuses to assemble an ljmp with a symbolic segment. Instead of
open-coding it everywhere, define a macro and use it for this case.
This is specifically an ljmpw from a 16-bit segment. This is okay, as
one should never enter real mode from a 32-bit segment: if one do, the
CPU ends up in a bizarre (and useless) mode sometimes called "unreal
mode" where segments behave like real mode but the default address and
operand sizes is 32 bits.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-15-git-send-email-jarkko.sakkinen@intel.com
Remove indirect jumps in trampoline_32.S and the 32-bit part of
wakeup_asm.S. There exist systems which are known to do weird
things if an SMI comes in right after a mode switch, and the
safest way to deal with it is to always follow with a simple
absolute far jump. In the 64-bit code we then to a register
indirect near jump; follow that pattern for the 32-bit code.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-14-git-send-email-jarkko.sakkinen@intel.com
Move various bits to the sections they really belong in in
trampoline_64.S. Use GLOBAL() rather than ENTRY() for data objects:
ENTRY() should only be used with code and forces alignment to 16
bytes.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-11-git-send-email-jarkko.sakkinen@intel.com
Add a .text64 section. The purpose of this is to keep 16-, 32- and
64-bit code segregated into separate sections, mainly to keep
disassembly sane.
Move barrier symbols out of sections to avoid the "symbol in empty
section" problem in some versions of GNU ld.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-10-git-send-email-jarkko.sakkinen@intel.com
Migrated ACPI wakeup code to the real-mode blob.
Code existing in .x86_trampoline can be completely
removed. Static descriptor table in wakeup_asm.S is
courtesy of H. Peter Anvin.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Migrated SMP trampoline code to the real mode blob.
SMP trampoline code is not yet removed from
.x86_trampoline because it is needed by the wakeup
code.
[ hpa: always enable compiling startup_32_smp in head_32.S... it is
only a few instructions which go into .init on UP builds, and it makes
the rest of the code less #ifdef ugly. ]
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-6-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Create realmode.bin and realmode.relocs files. Piggy
pack them into relocatable object that will be included
into .init.data section of the main kernel image.
The first file includes binary image of the real-mode code.
The latter file includes all relocations. The layout of the
binary image is specified in realmode.lds.S. The makefile
generates pa_ prefixed symbols for each exported global.
These are used in 32-bit code and in realmode header to
define symbols that need to be relocated.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-3-git-send-email-jarkko.sakkinen@intel.com
Originally-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
H. Peter Anvin