Commit Graph

310444 Commits

Author SHA1 Message Date
Artem Bityutskiy 020ac5b6be fat: introduce special inode for managing the FSINFO block
This is patchset makes fatfs stop using the VFS '->write_super()' method
for writing out the FSINFO block.

The final goal is to get rid of the 'sync_supers()' kernel thread.  This
kernel thread wakes up every 5 seconds (by default) and calls
'->write_super()' for all mounted file-systems.  And the bad thing is that
this is done even if all the superblocks are clean.  Moreover, some
file-systems do not even need this end they do not register the
'->write_super()' method at all (e.g., btrfs).

So 'sync_supers()' most often just generates useless wake-ups and wastes
power.  I am trying to make all file-systems independent of
'->write_super()' and plan to remove 'sync_supers()' and '->write_super'
completely once there are no more users.

The '->write_supers()' method is mostly used by baroque file-systems like
hfs, udf, etc.  Modern file-systems like btrfs and xfs do not use it.
This justifies removing this stuff from VFS completely and make every FS
self-manage own superblock.

Tested with xfstests.

This patch:

Preparation for further changes.  It introduces a special inode
('fsinfo_inode') in FAT file-system which we'll later use for managing the
FSINFO block.  Note, this there is already one special inode ('fat_inode')
which is used for managing the FAT tables.

Introduce new 'MSDOS_FSINFO_INO' constant for this special inode.  It is
safe to do because FAT file-system does not store inode numbers on the
media but generates them run-time.

I've also cleaned up the comment to existing 'MSDOS_ROOT_INO' constant,
while on it.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Dan Carpenter 7bc1bac77a HPFS: remove PRINTK() macro
The PRINTK() macro isn't really used.  Let's just remove it because it
is ugly and out of date.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Ryusuke Konishi 11475975dd nilfs2: flush disk caches in syncing
There are two cases that the cache flush is needed to avoid data loss
against unexpected hang or power failure.  One is sync file function (i.e.
 nilfs_sync_file) and another is checkpointing ioctl.

This issues a cache flush request to device for such cases if barrier
mount option is enabled, and makes sure data really is on persistent
storage on their completion.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Will Deacon a1d494495c pipe: return -ENOIOCTLCMD instead of -EINVAL on unknown ioctl command
As described in commit 07d106d0a3 ("vfs: fix up ENOIOCTLCMD error
handling"), drivers should return -ENOIOCTLCMD if they receive an ioctl
command which they don't understand.  Doing so will result in -ENOTTY
being returned to userspace, which matches the behaviour of the compat
layer if it fails to translate an ioctl command.

This patch fixes the pipe ioctl to return -ENOIOCTLCMD instead of -EINVAL
when passed an unknown ioctl command.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
H Hartley Sweeten c67e5382fb init: disable sparse checking of the mount.o source files
The init/mount.o source files produce a number of sparse warnings of the
type:

warning: incorrect type in argument 1 (different address spaces)
   expected char [noderef] <asn:1>*dev_name
   got char *name

This is due to the syscalls expecting some of the arguments to be user
pointers but they are being passed as kernel pointers.  This is harmless
but adds a lot of noise to a sparse build.

To limit the noise just disable the sparse checking in the relevant source
files, but still display a warning so that the user knows this has been
done.

Since the sparse checking has been disabled we can also remove the __user
__force casts that are scattered thru the source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Joe Perches 243f3803cf checkpatch: suggest pr_<level> over printk(KERN_<LEVEL>
Suggest the shorter pr_<level> instead of printk(KERN_<LEVEL>.

Prefer to use pr_<level> over bare printks.
Prefer to use pr_warn over pr_warning.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Eric Nelson 9a4cad4e25 checkpatch: check for whitespace before semicolon at EOL
Requires --strict option during invocation:
	~/linux$ scripts/checkpatch --strict foo.patch

This tests for a bad habits of mine like this:

	return 0 ;

Note that it does allow a special case of a bare semicolon
for empty loops:

	while (foo())
		;

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Denys Vlasenko 133fd9f5cd vsprintf: further optimize decimal conversion
Previous code was using optimizations which were developed to work well
even on narrow-word CPUs (by today's standards).  But Linux runs only on
32-bit and wider CPUs.  We can use that.

First: using 32x32->64 multiply and trivial 32-bit shift, we can correctly
divide by 10 much larger numbers, and thus we can print groups of 9 digits
instead of groups of 5 digits.

Next: there are two algorithms to print larger numbers.  One is generic:
divide by 1000000000 and repeatedly print groups of (up to) 9 digits.
It's conceptually simple, but requires an (unsigned long long) /
1000000000 division.

Second algorithm splits 64-bit unsigned long long into 16-bit chunks,
manipulates them cleverly and generates groups of 4 decimal digits.  It so
happens that it does NOT require long long division.

If long is > 32 bits, division of 64-bit values is relatively easy, and we
will use the first algorithm.  If long long is > 64 bits (strange
architecture with VERY large long long), second algorithm can't be used,
and we again use the first one.

Else (if long is 32 bits and long long is 64 bits) we use second one.

And third: there is a simple optimization which takes fast path not only
for zero as was done before, but for all one-digit numbers.

In all tested cases new code is faster than old one, in many cases by 30%,
in few cases by more than 50% (for example, on x86-32, conversion of
12345678).  Code growth is ~0 in 32-bit case and ~130 bytes in 64-bit
case.

This patch is based upon an original from Michal Nazarewicz.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Grant Likely 725fe002d3 vsprintf: correctly handle width when '#' flag used in %#p format
The '%p' output of the kernel's vsprintf() uses spec.field_width to
determine how many digits to output based on 2 * sizeof(void*) so that all
digits of a pointer are shown.  ie.  a pointer will be output as
"001A2B3C" instead of "1A2B3C".  However, if the '#' flag is used in the
format (%#p), then the code doesn't take into account the width of the
'0x' prefix and will end up outputing "0x1A2B3C" instead of "0x001A2B3C".

This patch reworks the "pointer()" format hook to include 2 characters for
the '0x' prefix if the '#' flag is included.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Nicolas Pitre d84970bbaf kernel/cpu_pm.c: fix various typos
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Colin Cross <ccross@android.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Andrew Morton 97fd75b7b8 kernel/irq/manage.c: use the pr_foo() infrastructure to prefix printks
Use the module-wide pr_fmt() mechanism rather than open-coding "genirq: "
everywhere.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Sasikantha babu 499eea6bf9 sethostname/setdomainname: notify userspace when there is a change in uts_kern_table
sethostname() and setdomainname() notify userspace on failure (without
modifying uts_kern_table).  Change things so that we only notify userspace
on success, when uts_kern_table was actually modified.

Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: WANG Cong <amwang@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Gustavo Padovan 5401cf3fac .mailmap: add Gustavo
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Sergei Shtylyov 9ceb5c16f5 drivers/message/fusion: use pci_dev->revision
This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it
wasn't converted by 44c10138fd ("PCI: Change all drivers to use
pci_device->revision").

In one case, it even reads PCI revision ID without using it -- that code
is now removed...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com>
Cc: Eric Moore <eric.moore@lsi.com>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Wei Yang ee5e5683d8 kernel/resource.c: correct the comment of allocate_resource()
In the comment of allocate_resource(), the explanation of parameter max
and min is not correct.

Actually, these two parameters are used to specify the range of the
resource that will be allocated, not the min/max size that will be
allocated.

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Xi Wang a3860c1c5d introduce SIZE_MAX
ULONG_MAX is often used to check for integer overflow when calculating
allocation size.  While ULONG_MAX happens to work on most systems, there
is no guarantee that `size_t' must be the same size as `long'.

This patch introduces SIZE_MAX, the maximum value of `size_t', to improve
portability and readability for allocation size validation.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Alex Elder <elder@dreamhost.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Xi Wang 15837294d4 CodingStyle: add kmalloc_array() to memory allocators
Add the new kmalloc_array() to the list of general-purpose memory
allocators in chapter 14.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Kautuk Consul 1cefe28f95 um/kernel/trap.c: port OOM changes to handle_page_fault()
Commit d065bd810b ("mm: retry page fault when blocking on disk
transfer") and commit 37b23e0525 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.

Port these changes to um.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
Andrew Morton 4f1c28d241 security/keys/keyctl.c: suppress memory allocation failure warning
This allocation may be large.  The code is probing to see if it will
succeed and if not, it falls back to vmalloc().  We should suppress any
page-allocation failure messages when the fallback happens.

Reported-by: Dave Jones <davej@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:26 -07:00
J. Bruce Fields 6eccece90b nfsd4: fix, consolidate client_has_state
Whoops: first, I reimplemented the already-existing has_resources
without noticing; second, I got the test backwards.  I did pick a better
name, though.  Combine the two....

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:39 -04:00
J. Bruce Fields b9831b59f3 nfsd4: don't remove rebooted client record until confirmation
In the NFSv4.1 client-reboot case we're currently removing the client's
previous state in exchange_id.  That's wrong--we should be waiting till
the confirming create_session.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:34 -04:00
J. Bruce Fields 32f16b3823 nfsd4: remove some dprintk's and a comment
The comment is redundant, and if we really want dprintk's here they'd
probably be better in the common (check-slot_seqid) code.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:31 -04:00
J. Bruce Fields 778df3f0fe nfsd4: return "real" sequence id in confirmed case
The client should ignore the returned sequence_id in the case where the
CONFIRMED flag is set on an exchange_id reply--and in the unconfirmed
case "1" is always the right response.  So it shouldn't actually matter
what we return here.

We could continue returning 1 just to catch clients ignoring the spec
here, but I'd rather be generous.  Other things equal, returning the
existing sequence_id seems more informative.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:27 -04:00
J. Bruce Fields 0f1ba0ef21 nfsd4: fix exchange_id to return confirm flag
Otherwise nfsd4_set_ex_flags writes over the return flags.

Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:21 -04:00
J. Bruce Fields 7447758be7 nfsd4: clarify that renewing expired client is a bug
This can't happen:
	- cl_time is zeroed only by unhash_client_locked, which is only
	  ever called under both the state lock and the client lock.
	- every caller of renew_client() should have looked up a
	  (non-expired) client and then called renew_client() all
	  without dropping the state lock.
	- the only other caller of renew_client_locked() is
	  release_session_client(), which first checks under the
	  client_lock that the cl_time is nonzero.

So make it clear that this is a bug, not something we handle.  I can't
quite bring myself to make this a BUG(), though, as there are a lot of
renew_client() callers, and returning here is probably safer than a
BUG().

We'll consider making it a BUG() after some more cleanup.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:14 -04:00
J. Bruce Fields 90d700b779 nfsd4: simpler ordering of setclientid_confirm checks
The cases here divide into two main categories:

	- if there's an uncomfirmed record with a matching verifier,
	  then this is a "normal", succesful case: we're either creating
	  a new client, or updating an existing one.
	- otherwise, this is a weird case: a replay, or a server reboot.

Reordering to reflect that makes the code a bit more concise and the
logic a lot easier to understand.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:07 -04:00
J. Bruce Fields f3d03b9202 nfsd4: setclientid: remove pointless assignment
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:06 -04:00
J. Bruce Fields 8695b90ac3 nfsd4: fix error return in non-matching-creds case
Note CLID_INUSE is for the case where two clients are trying to use the
same client-provided long-form client identifiers.  But what we're
looking at here is the server-returned shorthand client id--if those
clash there's a bug somewhere.

Fix the error return, pull the check out into common code, and do the
check unconditionally in all cases.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:04 -04:00
J. Bruce Fields 788c1eba50 nfsd4: fix setclientid_confirm same_cred check
New clients are created only by nfsd4_setclientid(), which always gives
any new client a unique clientid.  The only exception is in the
"callback update" case, in which case it may create an unconfirmed
client with the same clientid as a confirmed client.  In that case it
also checks that the confirmed client has the same credential.

Therefore, it is pointless for setclientid_confirm to check whether a
confirmed and unconfirmed client with the same clientid have matching
credentials--they're guaranteed to.

Instead, it should be checking whether the credential on the
setclientid_confirm matches either of those.  Otherwise, it could be
anyone sending the setclientid_confirm.  Granted, I can't see why anyone
would, but still it's probalby safer to check.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:03 -04:00
J. Bruce Fields 34b232bb37 nfsd4: merge 3 setclientid cases to 2
Boy, is this simpler.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:02 -04:00
J. Bruce Fields 8f9307119d nfsd4: pull out common code from setclientid cases
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:01 -04:00
J. Bruce Fields ad72aae5ad nfsd4: merge last two setclientid cases
The code here is mostly the same.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:30:00 -04:00
J. Bruce Fields 63db46328a nfsd4: setclientid/confirm comment cleanup
Be a little more concise.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:59 -04:00
J. Bruce Fields e98479b8d6 nfsd4: setclientid remove unnecessary terms from a logical expression
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:58 -04:00
J. Bruce Fields d5497fc693 nfsd4: move rq_flavor into svc_cred
Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:58 -04:00
J. Bruce Fields 8fbba96e5b nfsd4: stricter cred comparison for setclientid/exchange_id
The typical setclientid or exchange_id will probably be performed with a
credential that maps to either root or nobody, so comparing just uid's
is unlikely to be useful.  So, use everything else we can get our hands
on.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:57 -04:00
J. Bruce Fields 03a4e1f6dd nfsd4: move principal name into svc_cred
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:55 -04:00
J. Bruce Fields 631fc9ea05 nfsd4: allow removing clients not holding state
RFC 5661 actually says we should allow an exchange_id to remove a
matching client, even if the exchange_id comes from a different
principal, *if* the victim client lacks any state.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:55 -04:00
J. Bruce Fields 136e658d62 nfsd4: rearrange exchange_id logic to simplify
Minor cleanup: it's simpler to have separate code paths for the update
and non-update cases.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:54 -04:00
J. Bruce Fields 2dbb269dfe nfsd4: exchange_id cleanup: comments
Make these comments a bit more concise and uniform.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:53 -04:00
J. Bruce Fields 83e08fd46c nfsd4: exchange_id cleanup: local shorthands for repeated tests
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:52 -04:00
J. Bruce Fields 1a308118c2 nfsd4: allow an EXCHANGE_ID to kill a 4.0 client
Following rfc 5661 section 2.4.1, we can permit a 4.1 client to remove
an established 4.0 client's state.

(But we don't allow updates.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:52 -04:00
J. Bruce Fields ea236d0704 nfsd4: exchange_id: check creds before killing confirmed client
We mustn't allow a client to destroy another client with established
state unless it has the right credential.

And some minor cleanup.

(Note: our comparison of credentials is actually pretty bogus currently;
that will need to be fixed in another patch.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:51 -04:00
J. Bruce Fields 2786cc3a05 nfsd4: exchange_id error cleanup
There's no point to the dprintk here as the main proc_compound loop
already does this.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:50 -04:00
J. Bruce Fields 11ae681052 nfsd4: exchange_id has a pointless copy
We just verified above that these two verifiers are already the same.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:50 -04:00
J. Bruce Fields 3ddbe8794f svcrpc: fix a comment typo
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:49 -04:00
Weston Andros Adamson 5fb35a3a9b nfsd: return 0 on reads of fault injection files
debugfs read operations were returning the contents of an uninitialized u64.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:48 -04:00
Jeff Layton ce0fc43c5a nfsd: wrap all accesses to st_deny_bmap
Handle the st_deny_bmap in a similar fashion to the st_access_bmap. Add
accessor functions and use those instead of bare bitops.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:48 -04:00
Jeff Layton 82c5ff1b14 nfsd: wrap accesses to st_access_bmap
Currently, we do this for the most part with "bare" bitops, but
eventually we'll need to expand the share mode code to handle access
and deny modes on other nodes.

In order to facilitate that code in the future, move to some generic
accessor functions. For now, these are mostly static inlines, but
eventually we'll want to move these to "real" functions that are
able to handle multi-node configurations or have a way to "swap in"
new operations to be done in lieu of or in conjunction with these
atomic bitops.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:47 -04:00
Jeff Layton 3a3286147f nfsd: make test_share a bool return
All of the callers treat the return that way already.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:46 -04:00