We can suspend the mdm6600 over USB via sysfs and then mdm6600 enters
a low-power idle mode. In the low-power mode, mdm6600 radio and n_gsm
uart are functional but we need to use USB mode0 GPIO pin to send a
wake-up pulse to the modem to talk with it over n_gsm.
As the GPIO mode0 line is dual purposed and and also needed by the
USB PHY driver to boot mdm6600 into the correct USB mode, let's also
manage the wake-up GPIO in the USB PHY driver. For the USB PHY idle,
there does not anything specific we need to do for runtime PM after
getting the PHY configured. The PHY framework already idles the USB
PHY when not in use separately from the mdm6600 state.
It seems that it takes about 100 - 200ms for mdm6600 to wake up from
the low-power idle mode. And then mdm6600 stays awake about 1.2s until
it needs to be kicked again. The mdm6600 status GPIO pins don't seem
to change state when mdm6600 changes between normal and idle mode.
Let's manage the mdm6600 mode with runtime PM. If phy-mapphone-mdm6600
sysfs entry for power/control is set to "on", we keep mdm6600 out of
idle by kicking the GPIO line. If the entry is set to "auto" we let
mdm6600 enter low-power state.
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The new helper returns index of the matching string in an array.
We are going to use it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
A handful of fixes. I've been queuing them up a bit too long so the list
is longer than it otherwise would have been spread out across a few -rcs.
In general, it's a scattering of fixes across several platforms, nothing
truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a handful
of regressions, some of them going back very far, others more recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible, splitting
up describing LVDS as a proper bridge instead of having it as part of the
display unit. We could push for them to be backwards compatible with old
device trees, but it's likely to regress eventually if nobody's actually
using said compatibility.
-----BEGIN PGP SIGNATURE-----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=qPpk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes. I've been queuing them up a bit too long so the
list is longer than it otherwise would have been spread out across a
few -rcs.
In general, it's a scattering of fixes across several platforms,
nothing truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a
handful of regressions, some of them going back very far, others more
recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible,
splitting up describing LVDS as a proper bridge instead of having it
as part of the display unit.
We could push for them to be backwards compatible with old device
trees, but it's likely to regress eventually if nobody's actually
using said compatibility"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
ARM: keystone: fix platform_domain_notifier array overrun
arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
firmware: arm_scmi: Use after free in scmi_create_protocol_device()
ARM: dts: cygnus: fix irq type for arm global timer
Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
tee: check shm references are consistent in offset/size
tee: shm: fix use-after-free via temporarily dropped reference
ARM: dts: imx7s: Pass the 'fsl,sec-era' property
ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
ARM: dts: correct missing "compatible" entry for ti81xx SoCs
ARM: OMAP1: ams-delta: fix deferred_fiq handler
arm64: tegra: Make BCM89610 PHY interrupt as active low
ARM: davinci: fix GPIO lookup for I2C
ARM: dts: logicpd-som-lv: Fix pinmux controller references
ARM: dts: logicpd-som-lv: Fix Audio Mute
ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
...
This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.
-----BEGIN PGP SIGNATURE-----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=+6cH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes
arm64: tegra: Device tree fixes for v4.17
This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.
* tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make BCM89610 PHY interrupt as active low
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 7771c66457 ("signal/arm: Document conflicts with SI_USER and
SIGFPE") broke the siginfo structure for userspace triggered signals,
causing the strace testsuite to regress. Fix this by eliminating
the FPE_FIXME definition (which is at the root of the breakage) and
use FPE_FLTINV instead for the case where the hardware appears to be
reporting nonsense.
Fixes: 7771c66457 ("signal/arm: Document conflicts with SI_USER and SIGFPE")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit be83bbf806 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong. In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.
It turns out that the "s_maxbytes" limit was less "known good" than I
thought. In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore. As a result, that file got limited to the
default MAX_INT s_maxbytes value.
This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.
Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage. So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else. It wasn't the regular file case I was worried
about.
I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.
Fixes: be83bbf806 ("mmap: introduce sane default mmap limits")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... into a global, two-dimensional array and service subsequent reads from
that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs
disabled).
In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage
of the bank->blocks pointer.
Fixes: 27bd595027 ("x86/mce/AMD: Get address from already initialized block")
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook
Since do_undefinstr() uses get_user to get the undefined
instruction, it can be called before kprobes processes
recursive check. This can cause an infinit recursive
exception.
Prohibit probing on get_user functions.
Fixes: 24ba613c9d ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prohibit kprobes on do_undefinstr because kprobes on
arm is implemented by undefined instruction. This means
if we probe do_undefinstr(), it can cause infinit
recursive exception.
Fixes: 24ba613c9d ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prohibit probing on optimized_callback() because
it is called from kprobes itself. If we put a kprobes
on it, that will cause a recursive call loop.
Mark it NOKPROBE_SYMBOL.
Fixes: 0dc016dbd8 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since get_kprobe_ctlblk() uses smp_processor_id() to access
per-cpu variable, it hits smp_processor_id sanity check as below.
[ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 7.007859] caller is debug_smp_processor_id+0x20/0x24
[ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1
[ 7.008890] Hardware name: Generic DT based system
[ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24)
[ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98)
[ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c)
[ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24)
[ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4)
[ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0)
To fix this issue, call get_kprobe_ctlblk() right after
irq-disabled since that disables preemption.
Fixes: 0dc016dbd8 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
You can build a kernel in a cross compiling environment that doesn't
have perl in the $PATH. Commit 429f7a062e broke that for 32 bit
ARM. Fix it.
As reported by Stephen Rothwell, it appears that the symbols can be
either part of the BSS section or absolute symbols depending on the
binutils version. When they're an absolute symbol, the $(( ))
operator errors out and the build fails. Fix this as well.
Fixes: 429f7a062e ("ARM: decompressor: fix BSS size calculation")
Reported-by: Rob Landley <rob@landley.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
How we got to machine_crash_nonpanic_core() (iow, from an IPI, etc) is
not interesting for debugging a crash. The more interesting context
is the parent context prior to the IPI being received.
Record the parent context register state rather than the register state
in machine_crash_nonpanic_core(), which is more relevant to the failing
condition.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When a panic() occurs, the kexec code uses smp_send_stop() to stop
the other CPUs, but this results in the CPU register state not being
saved, and gdb is unable to inspect the state of other CPUs.
Commit 0ee59413c9 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path") addressed the issue on x86, but
ignored other architectures. Address the issue on ARM by splitting
out the crash stop implementation to crash_smp_send_stop() and
adding the necessary protection.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The hypervisor setup before __enter_kernel destroys the value
sotred in r1. The value needs to be restored just before the jump.
Fixes: 6b52f7bdb8 ("ARM: hyp-stub: Use r1 for the soft-restart address")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In commit 639da5ee37 ("ARM: add an extra temp register to the low
level debugging addruart macro") an additional temporary register was
added to the addruart macro, but the decompressor code wasn't updated.
Fixes: 639da5ee37 ("ARM: add an extra temp register to the low level debugging addruart macro")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The x86 mmap() code selects the mmap base for an allocation depending on
the bitness of the syscall. For 64bit sycalls it select mm->mmap_base and
for 32bit mm->mmap_compat_base.
exec() calls mmap() which in turn uses in_compat_syscall() to check whether
the mapping is for a 32bit or a 64bit task. The decision is made on the
following criteria:
ia32 child->thread.status & TS_COMPAT
x32 child->pt_regs.orig_ax & __X32_SYSCALL_BIT
ia64 !ia32 && !x32
__set_personality_x32() was dropping TS_COMPAT flag, but
set_personality_64bit() has kept compat syscall flag making
in_compat_syscall() return true during the first exec() syscall.
Which in result has user-visible effects, mentioned by Alexey:
1) It breaks ASAN
$ gcc -fsanitize=address wrap.c -o wrap-asan
$ ./wrap32 ./wrap-asan true
==1217==Shadow memory range interleaves with an existing memory mapping. ASan cannot proceed correctly. ABORTING.
==1217==ASan shadow was supposed to be located in the [0x00007fff7000-0x10007fff7fff] range.
==1217==Process memory map follows:
0x000000400000-0x000000401000 /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan
0x000000600000-0x000000601000 /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan
0x000000601000-0x000000602000 /home/izbyshev/test/gcc/asan-exec-from-32bit/wrap-asan
0x0000f7dbd000-0x0000f7de2000 /lib64/ld-2.27.so
0x0000f7fe2000-0x0000f7fe3000 /lib64/ld-2.27.so
0x0000f7fe3000-0x0000f7fe4000 /lib64/ld-2.27.so
0x0000f7fe4000-0x0000f7fe5000
0x7fed9abff000-0x7fed9af54000
0x7fed9af54000-0x7fed9af6b000 /lib64/libgcc_s.so.1
[snip]
2) It doesn't seem to be great for security if an attacker always knows
that ld.so is going to be mapped into the first 4GB in this case
(the same thing happens for PIEs as well).
The testcase:
$ cat wrap.c
int main(int argc, char *argv[]) {
execvp(argv[1], &argv[1]);
return 127;
}
$ gcc wrap.c -o wrap
$ LD_SHOW_AUXV=1 ./wrap ./wrap true |& grep AT_BASE
AT_BASE: 0x7f63b8309000
AT_BASE: 0x7faec143c000
AT_BASE: 0x7fbdb25fa000
$ gcc -m32 wrap.c -o wrap32
$ LD_SHOW_AUXV=1 ./wrap32 ./wrap true |& grep AT_BASE
AT_BASE: 0xf7eff000
AT_BASE: 0xf7cee000
AT_BASE: 0x7f8b9774e000
Fixes: 1b028f784e ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Fixes: ada26481df ("x86/mm: Make in_compat_syscall() work during exec")
Reported-by: Alexey Izbyshev <izbyshev@ispras.ru>
Bisected-by: Alexander Monakov <amonakov@ispras.ru>
Investigated-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20180517233510.24996-1-dima@arista.com
With the following commit:
fd35c88b74 ("objtool: Support GCC 8 switch tables")
I added a "can't find switch jump table" warning, to stop covering up
silent failures if add_switch_table() can't find anything.
That warning found yet another bug in the objtool switch table detection
logic. For cases 1 and 2 (as described in the comments of
find_switch_table()), the find_symbol_containing() check doesn't adjust
the offset for RIP-relative switch jumps.
Incidentally, this bug was already fixed for case 3 with:
6f5ec2993b ("objtool: Detect RIP-relative switch table references")
However, that commit missed the fix for cases 1 and 2.
The different cases are now starting to look more and more alike. So
fix the bug by consolidating them into a single case, by checking the
original dynamic jump instruction in the case 3 loop.
This also simplifies the code and makes it more robust against future
switch table detection issues -- of which I'm sure there will be many...
Switch table detection has been the most fragile area of objtool, by
far. I long for the day when we'll have a GCC plugin for annotating
switch tables. Linus asked me to delay such a plugin due to the
flakiness of the plugin infrastructure in older versions of GCC, so this
rickety code is what we're stuck with for now. At least the code is now
a little simpler than it was.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET is an arbitrary
multiple of PAGE_SIZE in the interval [0, 2MB).
The EFI stub does not account for the potential misalignment of
TEXT_OFFSET relative to EFI_KIMG_ALIGN, and produces a randomized
physical offset which is always a round multiple of EFI_KIMG_ALIGN.
This may result in statically allocated objects whose alignment exceeds
PAGE_SIZE to appear misaligned in memory. This has been observed to
result in spurious stack overflow reports and failure to make use of
the IRQ stacks, and theoretically could result in a number of other
issues.
We can OR in the low bits of TEXT_OFFSET to ensure that we have the
necessary offset (and hence preserve the misalignment of TEXT_OFFSET
relative to EFI_KIMG_ALIGN), so let's do that.
Reported-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
[ardb: clarify comment and commit log, drop unneeded parens]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 6f26b36711 ("arm64: kaslr: increase randomization granularity")
Link: http://lkml.kernel.org/r/20180518140841.9731-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hfsplus: stop workqueue when fill_super() failed
mm: don't allow deferred pages with NEED_PER_CPU_KM
MAINTAINERS: add Q: entry to kselftest for patchwork project
radix tree: fix multi-order iteration race
radix tree test suite: multi-order iteration race
radix tree test suite: add item_delete_rcu()
radix tree test suite: fix compilation issue
radix tree test suite: fix mapshift build target
include/linux/mm.h: add new inline function vmf_error()
lib/test_bitmap.c: fix bitmap optimisation tests to report errors correctly
Remove the last of the "select DELL_SMBIOS" references in the Kconfig.
The following is an automated git shortlog:
DELL_WMI use depends on instead of select for DELL_SMBIOS
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJa/2FkAAoJEKbMaAwKp364LkoH/RCYsANwPSfM/4irrJ4ECJeP
SYExOC7+E4BsPEKR62j0P3aNCojxKk/oCnDGxYt1Ah0D/z2s08HHfHF6+yBLVsRQ
85bxkz/5bPcvC4KFqEcJLR395gb4iGHxvIULNLBt0F+Lj2cVYiW7b7veVKujj4Qo
o+UlozhiXhW3WLcnaMTVVeZfxMFTsaGQjWvOaSTm4T/5/v+7EHYP62LFep2cs8P0
Ldk5noe5/i488YU4FsK7LRM0AD+c8Z9E4kf6ctSDG+1gAHTlNtol2zNiOKjZ0MNE
lWW5t/PhrznGnAiFH8OOxMBzLIoNnYJClgNPXzcocD1+EDu4wTo5bsgn+JlUaJ4=
=ehCv
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.17-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fix from Darren Hart:
"Remove the last of the "select DELL_SMBIOS" references in the Kconfig"
* tag 'platform-drivers-x86-v4.17-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
stm32 clk drivers that really always need to be there when that
particular machine is compiled in and boot fix on i.MX for Stefan who
noticed odd behavior from the critical flag patch that came in during
the merge window.
-----BEGIN PGP SIGNATURE-----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=rmOB
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
- a modified revert of a patch that made new choices come out for a
couple stm32 clk drivers that really always need to be there when
that particular machine is compiled in
- boot fix on i.MX for Stefan who noticed odd behavior from the
critical flag patch that came in during the merge window
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32: fix: stm32 clock drivers are not compiled by default
clk: imx6ull: use OSC clock during AXI rate change
syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1]. This
is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync().
As far as I can see, it is hfsplus_mark_mdb_dirty() from
hfsplus_new_inode() in hfsplus_fill_super() that calls
queue_delayed_work(). Therefore, I assume that hfsplus_new_inode() does
not fail if queue_delayed_work() was called, and the out_put_hidden_dir
label is the appropriate location to call cancel_delayed_work_sync().
[1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9
Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is unsafe to do virtual to physical translations before mm_init() is
called if struct page is needed in order to determine the memory section
number (see SECTION_IN_PAGE_FLAGS). This is because only in mm_init()
we initialize struct pages for all the allocated memory when deferred
struct pages are used.
My recent fix in commit c9e97a1997 ("mm: initialize pages on demand
during boot") exposed this problem, because it greatly reduced number of
pages that are initialized before mm_init(), but the problem existed
even before my fix, as Fengguang Wu found.
Below is a more detailed explanation of the problem.
We initialize struct pages in four places:
1. Early in boot a small set of struct pages is initialized to fill the
first section, and lower zones.
2. During mm_init() we initialize "struct pages" for all the memory that
is allocated, i.e reserved in memblock.
3. Using on-demand logic when pages are allocated after mm_init call
(when memblock is finished)
4. After smp_init() when the rest free deferred pages are initialized.
The problem occurs if we try to do va to phys translation of a memory
between steps 1 and 2. Because we have not yet initialized struct pages
for all the reserved pages, it is inherently unsafe to do va to phys if
the translation itself requires access of "struct page" as in case of
this combination: CONFIG_SPARSE && !CONFIG_SPARSE_VMEMMAP
The following path exposes the problem:
start_kernel()
trap_init()
setup_cpu_entry_areas()
setup_cpu_entry_area(cpu)
get_cpu_gdt_paddr(cpu)
per_cpu_ptr_to_phys(addr)
pcpu_addr_to_page(addr)
virt_to_page(addr)
pfn_to_page(__pa(addr) >> PAGE_SHIFT)
We disable this path by not allowing NEED_PER_CPU_KM with deferred
struct pages feature.
The problems are discussed in these threads:
http://lkml.kernel.org/r/20180418135300.inazvpxjxowogyge@wfg-t540p.sh.intel.comhttp://lkml.kernel.org/r/20180419013128.iurzouiqxvcnpbvz@wfg-t540p.sh.intel.comhttp://lkml.kernel.org/r/20180426202619.2768-1-pasha.tatashin@oracle.com
Link: http://lkml.kernel.org/r/20180515175124.1770-1-pasha.tatashin@oracle.com
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Dennis Zhou <dennisszhou@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A new patchwork project is created to track kselftest patches. Update
the kselftest entry in the MAINTAINERS file adding 'Q:' entry:
https://patchwork.kernel.org/project/linux-kselftest/list/
Link: http://lkml.kernel.org/r/20180515164427.12201-1-shuah@kernel.org
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a race in the multi-order iteration code which causes the kernel to
hit a GP fault. This was first seen with a production v4.15 based
kernel (4.15.6-300.fc27.x86_64) utilizing a DAX workload which used
order 9 PMD DAX entries.
The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree. Remember for example that
an order 2 entry looks like this:
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'
When we delete 'entry' from the tree, we call :
radix_tree_delete()
radix_tree_delete_item()
__radix_tree_delete()
replace_slot()
replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL. This means that for a
brief period of time we end up with one or more of the siblings removed,
so:
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection. This is a common case in
mm/filemap.c.
The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:
V preceding slot
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
^ current slot
This lets you find the first sibling, and you skip them all in order.
But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:
V preceding slot
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
^ current slot
This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers. This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.
In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.
We fix this race by fixing the way that skip_siblings() detects sibling
nodes. Instead of testing against the preceding slot we instead look
for siblings via is_sibling_entry() which compares against the position
of the struct radix_tree_node.slots[] array. This ensures that sibling
entries are properly identified, even if they are no longer contiguous
with the 'entry' they point to.
Link: http://lkml.kernel.org/r/20180503192430.7582-6-ross.zwisler@linux.intel.com
Fixes: 148deab223 ("radix-tree: improve multiorder iterators")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: CR, Sapthagirish <sapthagirish.cr@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a test which shows a race in the multi-order iteration code. This
test reliably hits the race in under a second on my machine, and is the
result of a real bug report against kernel a production v4.15 based
kernel (4.15.6-300.fc27.x86_64). With a real kernel this issue is hit
when using order 9 PMD DAX radix tree entries.
The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree. Remember that an order 2
entry looks like this:
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'
When we delete 'entry' from the tree, we call :
radix_tree_delete()
radix_tree_delete_item()
__radix_tree_delete()
replace_slot()
replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL. This means that for a
brief period of time we end up with one or more of the siblings removed,
so:
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection. This is a common case in
mm/filemap.c.
The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:
V preceding slot
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
^ current slot
This lets you find the first sibling, and you skip them all in order.
But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:
V preceding slot
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
^ current slot
This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers. This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.
In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.
In the radix tree test suite this will be caught by the address
sanitizer:
==27063==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x60c0008ae400 at pc 0x00000040ce4f bp 0x7fa89b8fcad0 sp 0x7fa89b8fcac0
READ of size 8 at 0x60c0008ae400 thread T3
#0 0x40ce4e in __radix_tree_next_slot /home/rzwisler/project/linux/tools/testing/radix-tree/radix-tree.c:1660
#1 0x4022cc in radix_tree_next_slot linux/../../../../include/linux/radix-tree.h:567
#2 0x4022cc in iterator_func /home/rzwisler/project/linux/tools/testing/radix-tree/multiorder.c:655
#3 0x7fa8a088d50a in start_thread (/lib64/libpthread.so.0+0x750a)
#4 0x7fa8a03bd16e in clone (/lib64/libc.so.6+0xf516e)
Link: http://lkml.kernel.org/r/20180503192430.7582-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the lifetime of "struct item" entries in the radix tree are
not controlled by RCU, but are instead deleted inline as they are
removed from the tree.
In the following patches we add a test which has threads iterating over
items pulled from the tree and verifying them in an
rcu_read_lock()/rcu_read_unlock() section. This means that though an
item has been removed from the tree it could still be being worked on by
other threads until the RCU grace period expires. So, we need to
actually free the "struct item" structures at the end of the grace
period, just as we do with "struct radix_tree_node" items.
Link: http://lkml.kernel.org/r/20180503192430.7582-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pulled from a patch from Matthew Wilcox entitled "xarray: Add definition
of struct xarray":
> From: Matthew Wilcox <mawilcox@microsoft.com>
> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
https://patchwork.kernel.org/patch/10341249/
These defines fix this compilation error:
In file included from ./linux/radix-tree.h:6:0,
from ./linux/../../../../include/linux/idr.h:15,
from ./linux/idr.h:1,
from idr.c:4:
./linux/../../../../include/linux/idr.h: In function `idr_init_base':
./linux/../../../../include/linux/radix-tree.h:129:2: warning: implicit declaration of function `spin_lock_init'; did you mean `spinlock_t'? [-Wimplicit-function-declaration]
spin_lock_init(&(root)->xa_lock); \
^
./linux/../../../../include/linux/idr.h:126:2: note: in expansion of macro `INIT_RADIX_TREE'
INIT_RADIX_TREE(&idr->idr_rt, IDR_RT_MARKER);
^~~~~~~~~~~~~~~
by providing a spin_lock_init() wrapper for the v4.17-rc* version of the
radix tree test suite.
Link: http://lkml.kernel.org/r/20180503192430.7582-3-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c6ce3e2fe3 ("radix tree test suite: Add config option for map
shift") introduced a phony makefile target called 'mapshift' that ends
up generating the file generated/map-shift.h. This phony target was
then added as a dependency of the top level 'targets' build target,
which is what is run when you go to tools/testing/radix-tree and just
type 'make'.
Unfortunately, this phony target doesn't actually work as a dependency,
so you end up getting:
$ make
make: *** No rule to make target 'generated/map-shift.h', needed by 'main.o'. Stop.
make: *** Waiting for unfinished jobs....
Fix this by making the file generated/map-shift.h our real makefile
target, and add this a dependency of the top level build target.
Link: http://lkml.kernel.org/r/20180503192430.7582-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many places in drivers/ file systems, error was handled in a common way
like below:
ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
vmf_error() will replace this and return vm_fault_t type err.
A lot of drivers and filesystems currently have a rather complex mapping
of errno-to-VM_FAULT code. We have been able to eliminate a lot of it
by just returning VM_FAULT codes directly from functions which are
called exclusively from the fault handling path.
Some functions can be called both from the fault handler and other
context which are expecting an errno, so they have to continue to return
an errno. Some users still need to choose different behaviour for
different errnos, but vmf_error() captures the essential error
translation that's common to all users, and those that need to handle
additional errors can handle them first.
Link: http://lkml.kernel.org/r/20180510174826.GA14268@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I had neglected to increment the error counter when the tests failed,
which made the tests noisy when they fail, but not actually return an
error code.
Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au
Fixes: 3cc78125a0 ("lib/test_bitmap.c: add optimisation tests")
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If DELL_WMI "select"s DELL_SMBIOS, the DELL_SMBIOS dependencies are
ignored and it is still possible to end up with unmet direct
dependencies.
Change the select to a depends on.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Just three commits.
The two cxl ones are not fixes per se, but they modify code that was added this
cycle so that it will work with a recent firmware change.
And then a fix for a recent commit that added sleeps in the NVRAM code, which
needs to be more careful and not sleep if eg. we're called in the panic() path.
Thanks to:
Nicholas Piggin, Philippe Bergheaud, Christophe Lombard.
-----BEGIN PGP SIGNATURE-----
iQIwBAABCAAaBQJa/tZPExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYAZ
1xAAtFpiF0YzTigwxSJBrDHjj+JkkPrHZ0OtItIFI6V3FaerbL6ZFJyn2/wfM7N7
v5wluFucSq4I96pMMecLJx7KGMFMBg1GoMbToEM9dqY2mDxK6pvrXX8RJ3dafMql
N+NsaJptdGm8hu4HB//P752nvjH9G2xARIc4twMPdXdBTyINtCXhTPFOtZQN0c4V
IStGkchwkyJPdzQHy1T+T1crKrgL1hqcTX0ubC7iedX8L1H+pdxm58GUo4zQTVKF
5ZOWYPYScawdPQJSi/KEaZqYW9nPiJiE0zd5B5tjGwFQlcZtzIz3PfokdD6vY75g
SEbvbOJxdWFiihwCsZPrQyUe7P4RRboLxl5n0YWeK7SYh1eEQ38YeOTkEIy8KKEV
tQUR3c3XeWBD8WOpMXuxmwla5HsNgcYhDmSIx96jVX/VVOzKFbpdeYxfbOZDkVK6
puX0Bwm8WVI9wbLtqTdMDtdencn9qOuwX7Pzot0p/XhJGOvwmgS3+rPhzcfU1Ftw
0Y2y5MH+wthj6glxLYro0qSwkUQYnT6KHzY8S1pheN2DgzWVkSWOnIqrWkvcvm3R
10bqg/wBrAQYylTO4jkYKKMBYMgSE3x2nIC08I7nfJ37xQFSwTI5K8WbhSYG8MKo
TZxwhgZX/ip4Ylxuk3P0nMx1Tt/DmkvcguuYqgfBKMNMO+U=
=yrZc
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Just three commits.
The two cxl ones are not fixes per se, but they modify code that was
added this cycle so that it will work with a recent firmware change.
And then a fix for a recent commit that added sleeps in the NVRAM
code, which needs to be more careful and not sleep if eg. we're called
in the panic() path.
Thanks to Nicholas Piggin, Philippe Bergheaud, Christophe Lombard"
* tag 'powerpc-4.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix NVRAM sleep in invalid context when crashing
cxl: Report the tunneled operations status
cxl: Set the PBCQ Tunnel BAR register when enabling capi mode
Fix an ACPICA regression introduced in this cycle and related to the
handling of package objects loaded by the Load and loadTable AML
operators that are not initialized properly after recent changes (Bob
Moore).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJa/ny1AAoJEILEb/54YlRxNN4P+wc8EikqQqKSUxkml0RVtI3D
br8IgrdnUYW2jiz8C1ibo6trUL9Ab8hNMh7TbDUnbl7fNtqbcTPtcgXmC5cDo+ZI
CTuD1mQ8/oakvMs1vZ/5F/h7ZlbJHn84LCjrW7+u0V66WoRJ9nUh3x9ahEyQ+Bmm
od/d+YrbiVh2/MfVQ5Ije4ugzvQL7JBeUkC4e8bsE7HkZK8lFJ7WCx9fHTdyn8fb
LBw2hPqhTzRLVPsK97U68Zo8t2yqlHNGjk5P1SiSg0pe6IU/DjdS+fBC8sBPgRh1
A4kHRzJyajZMphBtgVQJn4tKSR/bGL39r/2hCtojC/pYhcm1ZIqu5AmCPOJtYIPb
zIgSXLS8debnVfz4UeKBV5Jn38uZfWxj48pzt92EVxJ2/MVyZkDHMa/kVicC/K1l
owZ1O1eDKK2KYs8Eebp8GgPHLDp6IDVFLJjmUDNCKegTKro1fzia1lh5bdiv1lWU
zoMWGUCHo9ngJ+OEnwuOc/j7al7PHQ0fZznzR+Pu6s5VmY3IHf905is4cLG73ZRn
ya+fF64K2YUsPPUK5X/ywRT2UxIahrlGXoVhbfwCUHm2OXS/EVtaOuGnbaJbDrnN
M/gUQE0TKwtcmHadCfDBsb+DJ+kO4Yyt5Yfgl7e0cY/CUKXboNoSZp5Z4rlS814L
EjIPdMpAyKlKq+/gLge1
=pVWi
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an ACPICA regression introduced in this cycle and related to the
handling of package objects loaded by the Load and loadTable AML
operators that are not initialized properly after recent changes (Bob
Moore)"
* tag 'acpi-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Add deferred package support for the Load and loadTable operators
Here are some USB driver fixes fro 4.17-rc6.
They resolve some reported bugs in the musb driver, the xhci driver, and
a number of small fixes for the usbip driver.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWv7roA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yklSwCglRWdR/XPWovehZcFz1x/LHIbxAkAn0aV7mh/
k9WHsoAKijXbOIkMNswb
=t6bD
-----END PGP SIGNATURE-----
Merge tag 'usb-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes fro 4.17-rc6.
They resolve some reported bugs in the musb driver, the xhci driver,
and a number of small fixes for the usbip driver.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbip: usbip_host: fix bad unlock balance during stub_probe()
usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
usbip: usbip_host: run rebind from exit when module is removed
usbip: usbip_host: delete device from busid_table after rebind
usbip: usbip_host: refine probe and disconnect debug msgs to be useful
usb: musb: fix remote wakeup racing with suspend
xhci: Fix USB3 NULL pointer dereference at logical disconnect.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1mzk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180518' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Single fix this time, from Coly, fixing a failure case when
CONFIG_DEBUGFS isn't enabled"
* tag 'for-linus-20180518' of git://git.kernel.dk/linux-block:
bcache: return 0 from bch_debug_init() if CONFIG_DEBUG_FS=n
A small collection of fixes accumilated since the merge window, all
fairly small and driver specific.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlr+pAkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GwxB/98O1TEt6W/6wD5cy6c6RYkLK3RuK2Z
dgMiWf+jQMmuw5kTFZxF5WhV+P06zgb43DX7+xWgJKzS9AqAuFtnbvMWK1FHoXIK
07/3OEXj1FbKupvO/lJLj2hVCrucPImLBru4dg9EoJ0bPSYs8VwyFpMZ8UQ9AOi7
8PV75jbsu8ReQ9Mt2NHN1mo9VW1d5lY42Hnm+ILqOESX76GmKy6lMtHvmkfkm4/P
EgQdSPDTiycuWwzKQg72U5Jwe/NT4c9hND4Cst1HbXLdCAXawgEK8syR1RBj32+u
QznZTiWUQ1TIVkcgwim5Mi6NqeQUHijbtsM8FjJ1olIkh7HeC4+y/lu6
=sghC
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes accumilated since the merge window, all
fairly small and driver specific"
* tag 'spi-fix-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835aux: ensure interrupts are enabled for shared handler
spi: bcm-qspi: Always read and set BSPI_MAST_N_BOOT_CTRL
spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master
spi: pxa2xx: Allow 64-bit DMA
spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()
spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR
spi: imx: Update MODULE_DESCRIPTION to "SPI Controller driver"
- Fix read path of the Marvell NAND driver
- Make sure we don't pass a u64 to ndelay()
CFI fixes:
- Fix the map_word_andequal() implementation
-----BEGIN PGP SIGNATURE-----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=a+lh
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-4.17-rc6' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
"NAND fixes:
- Fix read path of the Marvell NAND driver
- Make sure we don't pass a u64 to ndelay()
CFI fix:
- Fix the map_word_andequal() implementation"
* tag 'mtd/fixes-for-4.17-rc6' of git://git.infradead.org/linux-mtd:
mtd: rawnand: Fix return type of __DIVIDE() when called with 32-bit
mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2
mtd: Fix comparison in map_word_andequal()
-----BEGIN PGP SIGNATURE-----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=kLC/
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Pretty quiet week again: one vmwgfx regression fix, one core buffer
overflow fix, one vc4 leak fix and three i915 fixes"
* tag 'drm-fixes-for-v4.17-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl()
drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk
drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
drm/vc4: Fix leak of the file_priv that stored the perfmon.
drm/i915/execlists: Use rmb() to order CSB reads
drm/i915/userptr: reject zero user_size
drm: Match sysfs name in link removal to link creation
No other architecture has setup_profiling_timer() in the init section,
thus on parisc we face this section mismatch warning:
Reference from the function devm_device_add_group() to the function .init.text:setup_profiling_timer()
Signed-off-by: Helge Deller <deller@gmx.de>
The 0-DAY kernel test infrastructure reported that inet_put_port() may
reference the find_pa_parent_type() function, so it can't be moved into the
init section.
Fixes: b86db40e1e ("parisc: Move various functions and strings to init section")
Signed-off-by: Helge Deller <deller@gmx.de>
All T&M instruments should also work with rigol_quirk = 1 code path.
So remove unnecessary code in rigol_quirk = 0 code path to simplify the driver.
Tested-by: Dave Penkler <dpenkler@gmail.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'tip' prefix probably referred to the -tip tree and is not required,
remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180515165328.24899-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the grub_reclaim() function can be made static, make it so.
Silences the following GCC warning (W=1):
kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the following commit:
6b55c9654f ("sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h")
the print_cfs_rq() prototype was added to <kernel/sched/sched.h>,
right next to the prototypes for print_cfs_stats(), print_rt_stats()
and print_dl_stats().
Finish this previous commit and also move related prototypes for
print_rt_rq() and print_dl_rq().
Remove existing extern declarations now that they not needed anymore.
Silences the following GCC warning, triggered by W=1:
kernel/sched/debug.c:573:6: warning: no previous prototype for ‘print_rt_rq’ [-Wmissing-prototypes]
kernel/sched/debug.c:603:6: warning: no previous prototype for ‘print_dl_rq’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516195348.30426-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tony Lindgren