Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to
keep legacy software happy. This is similar to what was done for
ipv4 in commit 709772e6e0 ("net: Fix routing tables with
id > 255 for legacy software").
Signed-off-by: Kalash Nainwal <kalash@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
c72219b75f introduced tpacket_set_protocol that parses the Ethernet L2
header and sets skb->protocol if it's unset. It is no longer needed
since the introduction of packet_parse_headers. In case of SOCK_RAW and
unset skb->protocol, packet_parse_headers asks the driver to tell the
protocol number, and it's implemented for all Ethernet devices. As the
old function supported only Ethernet, no functionality is lost.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a socket was created with socket(AF_PACKET, SOCK_RAW, 0), the
protocol number is unavailable. Try to ask the driver to extract it from
the L2 header in order for skb_try_probe_transport_header to succeed.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit introduced parse_protocol callback which should
extract the protocol number from the L2 header. Make all Ethernet
devices support it.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the socket was created with socket(AF_PACKET, SOCK_RAW, 0),
skb->protocol will be unset, __skb_flow_dissect() will fail, and
skb_probe_transport_header() will fall back to the offset_hint, making
the resulting skb_transport_offset incorrect.
If, however, there is no transport header in the packet,
transport_header shouldn't be set to an arbitrary value.
Fix it by leaving the transport offset unset if it couldn't be found, to
be explicit rather than to fill it with some wrong value. It changes the
behavior, but if some code relied on the old behavior, it would be
broken anyway, as the old one is incorrect.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* the massive patch series for multi-BSSID support, I ended up
applying that through a side branch to record some details
* CSA improvements
* HE (802.11ax) updates to Draft 3.3
* strongly typed element iteration/etc. to make such code more
readable - this came up in particular in multi-BSSID
* rhashtable conversion patches from Herbert
Along, as usual, with various fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=SM9w
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2019-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time we have, of note:
* the massive patch series for multi-BSSID support, I ended up
applying that through a side branch to record some details
* CSA improvements
* HE (802.11ax) updates to Draft 3.3
* strongly typed element iteration/etc. to make such code more
readable - this came up in particular in multi-BSSID
* rhashtable conversion patches from Herbert
Along, as usual, with various fixes and improvements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211 mesh code wasn't allocating SKB tailroom properly
in some cases
* tx_sk_pacing_shift should be 7 for better performance
* mac80211_hwsim wasn't propagating genlmsg_reply() errors
-----BEGIN PGP SIGNATURE-----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=JEqH
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three more fixes:
* mac80211 mesh code wasn't allocating SKB tailroom properly
in some cases
* tx_sk_pacing_shift should be 7 for better performance
* mac80211_hwsim wasn't propagating genlmsg_reply() errors
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to properly support VLAN filtering being enabled/disabled on a
bridge, while having other ports being non bridge port members, we need
to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make
sure the non-bridge ports can continue receiving VLAN tags, even when
the switch is globally configured to do ingress/egress VID checking.
Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer
NULL, we now need to check that in these two functions.
We specifically deal with two possibly problematic cases:
- creating a bridge VLAN entry while there is an existing VLAN device
claiming that same VID
- creating a VLAN device while there is an existing bridge VLAN entry
with that VID
Those are both resolved with returning -EBUSY back to user-space.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VLAN devices on top of a DSA network device which is already part of a
bridge and with said bridge being VLAN aware should not be allowed to be
enslaved into that bridge. For one, this duplicates functionality
offered by the VLAN aware bridge which supports tagged and untagged VLAN
frames processing and it would make things needlessly complex to e.g.:
propagate FDB/MDB accordingly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__sys_setsockopt() already checks for `optlen < 0`. Add an equivalent check
to the compat path for robustness. This has to be `> INT_MAX` instead of
`< 0` because the signedness of `optlen` is different here.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netdevice is unregistered, we flush the relevant exception
via rt6_sync_down_dev() -> fib6_ifdown() -> fib6_del() -> fib6_del_route().
Finally, we end-up calling rt6_remove_exception(), where we release
the relevant dst, while we keep the references to the related fib6_info and
dev. Such references should be released later when the dst will be
destroyed.
There are a number of caches that can keep the exception around for an
unlimited amount of time - namely dst_cache, possibly even socket cache.
As a result device registration may hang, as demonstrated by this script:
ip netns add cl
ip netns add rt
ip netns add srv
ip netns exec rt sysctl -w net.ipv6.conf.all.forwarding=1
ip link add name cl_veth type veth peer name cl_rt_veth
ip link set dev cl_veth netns cl
ip -n cl link set dev cl_veth up
ip -n cl addr add dev cl_veth 2001::2/64
ip -n cl route add default via 2001::1
ip -n cl link add tunv6 type ip6tnl mode ip6ip6 local 2001::2 remote 2002::1 hoplimit 64 dev cl_veth
ip -n cl link set tunv6 up
ip -n cl addr add 2013::2/64 dev tunv6
ip link set dev cl_rt_veth netns rt
ip -n rt link set dev cl_rt_veth up
ip -n rt addr add dev cl_rt_veth 2001::1/64
ip link add name rt_srv_veth type veth peer name srv_veth
ip link set dev srv_veth netns srv
ip -n srv link set dev srv_veth up
ip -n srv addr add dev srv_veth 2002::1/64
ip -n srv route add default via 2002::2
ip -n srv link add tunv6 type ip6tnl mode ip6ip6 local 2002::1 remote 2001::2 hoplimit 64 dev srv_veth
ip -n srv link set tunv6 up
ip -n srv addr add 2013::1/64 dev tunv6
ip link set dev rt_srv_veth netns rt
ip -n rt link set dev rt_srv_veth up
ip -n rt addr add dev rt_srv_veth 2002::2/64
ip netns exec srv netserver & sleep 0.1
ip netns exec cl ping6 -c 4 2013::1
ip netns exec cl netperf -H 2013::1 -t TCP_STREAM -l 3 & sleep 1
ip -n rt link set dev rt_srv_veth mtu 1400
wait %2
ip -n cl link del cl_veth
This commit addresses the issue purging all the references held by the
exception at time, as we currently do for e.g. ipv6 pcpu dst entries.
v1 -> v2:
- re-order the code to avoid accessing dst and net after dst_dev_put()
Fixes: 93531c6743 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hb_timer might not start at all for a particular transport because its
start is conditional. In a result a node is not sending heartbeats.
Function sctp_transport_reset_hb_timer has two roles:
- initial start of hb_timer for a given transport,
- update expire date of hb_timer for a given transport.
The function is optimized to update timer's expire only if it is before
a new calculated one but this comparison is invalid for a timer which
has not yet started. Such a timer has expire == 0 and if a new expire
value is bigger than (MAX_JIFFIES / 2 + 2) then "time_before" macro will
fail and timer will not start resulting in no heartbeat packets send by
the node.
This was found when association was initialized within first 5 mins
after system boot due to jiffies init value which is near to MAX_JIFFIES.
Test kernel version: 4.9.154 (ARCH=arm)
hb_timer.expire = 0; //initialized, not started timer
new_expire = MAX_JIFFIES / 2 + 2; //or more
time_before(hb_timer.expire, new_expire) == false
Fixes: ba6f5e33bd ("sctp: avoid refreshing heartbeat timer too often")
Reported-by: Marcin Stojek <marcin.stojek@nokia.com>
Tested-by: Marcin Stojek <marcin.stojek@nokia.com>
Signed-off-by: Maciej Kwiecien <maciej.kwiecien@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forwarded packets enter the tx path through ieee80211_add_pending_skb,
which skips the ieee80211_skb_resize call.
Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The rhashtable_walk_init function has been obsolete for more than
two years. This patch finally converts its last users over to
rhashtable_walk_enter and removes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code in mesh_path_add tries to handle the case where a duplicate
entry is added to the rhashtable by doing a lookup after a failed
insertion. It also tries to handle races by repeating the insertion
should the lookup fail.
This is now unnecessary as we have rhashtable API functions that can
directly return the mathcing object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge net-next to resolve a conflict and to get the mac80211
rhashtable fixes so further patches can be applied on top.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Update element names and new fields according to D3.3 of
the HE spec.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes, we may want to transport higher bandwidth data
through vendor events, and in that case sending it multicast
is a bad idea. Allow vendor events to be unicast.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some buggy APs keep the CSA IE in probes after the channel
switch was completed and can silence us for no good reason.
Apply quiet mode only from beacons. If there is real channel
switch going on, we will see the beacon anyway.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, due to some buggy APs that continue to include
CSA IEs after the switch, we ignore CSA to same channel.
However, some other APs may do CSA to self in order to have
immediate quiet. Allow it. Do it only for beacons.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some drivers may want to track further the CSA beacons, for example
to compensate for buggy APs that change the beacon count or quiet
mode during CSA flow.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211_vendor_radiotap was read from the beginning
of the skb->data regardless of the existence of other
elements in radiotap that would cause it to move to another
position. Fix this by taking into account where it really
should be.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case we receive a beacon without CSA IE while we are in
the middle of channel switch - abort the operation.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018 REVmd of the spec introduces the max channel switch time
element which is optionally included in beacons/probes when there
is a channel switch / extended channel switch element.
The value represents the maximum delay between the time the AP
transmitted the last beacon in current channel and the expected
time of the first beacon in the new channel, in TU.
Parse the value and pass it to the driver.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This extends the NL80211_CMD_ASSOCIATE event case to report
NL80211_ATTR_REQ_IE similarly to what is already done with the
NL80211_CMD_CONNECT events if the driver provides this information. In
practice, this adds (Re)Association Request frame information element
reporting to mac80211 drivers for the cases where user space SME is
used.
This provides more information for user space to figure out which
capabilities were negotiated for the association. For example, this can
be used to determine whether HT, VHT, or HE is used.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch is to use eth_broadcast_addr() to assign broadcast address
insetad of memset().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we did the original tests for the optimal value of sk_pacing_shift, we
came up with 6 ms of buffering as the default. Sadly, 6 is not a power of
two, so when picking the shift value I erred on the size of less buffering
and picked 4 ms instead of 8. This was probably wrong; those 2 ms of extra
buffering makes a larger difference than I thought.
So, change the default pacing shift to 7, which corresponds to 8 ms of
buffering. The point of diminishing returns really kicks in after 8 ms, and
so having this as a default should cut down on the need for extensive
per-device testing and overrides needed in the drivers.
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
clang warns about overflowing the data[] member in the struct pnpipehdr:
net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]
if (hdr->data[4] == PEP_IND_READY)
^ ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
u8 data[1];
Using a flexible array member at the end of the struct avoids the
warning, but since we cannot have a flexible array member inside
of the union, each index now has to be moved back by one, which
makes it a little uglier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2019-02-21
1) Don't do TX bytes accounting for the esp trailer when sending
from a request socket as this will result in an out of bounds
memory write. From Martin Willi.
2) Destroy xfrm_state synchronously on net exit path to
avoid nested gc flush callbacks that may trigger a
warning in xfrm6_tunnel_net_exit(). From Cong Wang.
3) Do an unconditionally clone in pfkey_broadcast_one()
to avoid a race when freeing the skb.
From Sean Tranchetti.
4) Fix inbound traffic via XFRM interfaces across network
namespaces. We did the lookup for interfaces and policies
in the wrong namespace. From Tobias Brunner.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Report erspan version field to userspace in ip6gre_fill_info just for
erspan_v6 tunnels. Moreover report IFLA_GRE_ERSPAN_INDEX only for
erspan version 1.
The issue can be triggered with the following reproducer:
$ip link add name gre6 type ip6gre local 2001::1 remote 2002::2
$ip link set gre6 up
$ip -d link sh gre6
14: grep6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1448 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/gre6 2001::1 peer 2002::2 promiscuity 0 minmtu 0 maxmtu 0
ip6gre remote 2002::2 local 2001::1 hoplimit 64 encaplimit 4 tclass 0x00 flowlabel 0x00000 erspan_index 0 erspan_ver 0 addrgenmode eui64
Fixes: 94d7d8f292 ("ip6_gre: add erspan v2 support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report erspan version field to userspace in ipgre_fill_info just for
erspan tunnels. The issue can be triggered with the following reproducer:
$ip link add name gre1 type gre local 192.168.0.1 remote 192.168.1.1
$ip link set dev gre1 up
$ip -d link sh gre1
13: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/gre 192.168.0.1 peer 192.168.1.1 promiscuity 0 minmtu 0 maxmtu 0
gre remote 192.168.1.1 local 192.168.0.1 ttl inherit erspan_ver 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1
Fixes: f551c91de2 ("net: erspan: introduce erspan v2 for ip_gre")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the bridge no longer calling switchdev_port_attr_get() to obtain
the supported bridge port flags from a driver but instead trying to set
the bridge port flags directly and relying on driver to reject
unsupported configurations, we can effectively get rid of
switchdev_port_attr_get() entirely since this was the only place where
it was called.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have converted the bridge code and the drivers to check for
bridge port(s) flags at the time we try to set them, there is no need
for a get() -> set() sequence anymore and
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT therefore becomes unused.
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all switchdev drivers have been converted to check the
SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS flags and report flags that they
do not support accordingly, we can migrate the bridge code to try to set
that attribute first, check the results and then do the actual setting.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT,
add support for a function that processes the
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and
SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not
supported for any flag set, since DSA does not currently support
toggling those bridge port attributes (yet).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switches work by learning the MAC address for each attached station by
monitoring traffic from each station. When a station sends a packet,
the switch records which port the MAC address is connected to.
With IPv4 networking, before communication commences with a neighbour,
an ARP packet is broadcasted to all stations asking for the MAC address
corresponding with the IPv4. The desired station responds with an ARP
reply, and the ARP reply causes the switch to learn which port the
station is connected to.
With IPv6 networking, the situation is rather different. Rather than
broadcasting ARP packets, a "neighbour solicitation" is multicasted
rather than broadcasted. This multicast needs to reach the intended
station in order for the neighbour to be discovered.
Once a neighbour has been discovered, and entered into the sending
stations neighbour cache, communication can restart at a point later
without sending a new neighbour solicitation, even if the entry in
the neighbour cache is marked as stale. This can be after the MAC
address has expired from the forwarding cache of the DSA switch -
when that occurs, there is a long pause in communication.
Our DSA implementation for mv88e6xxx switches disables flooding of
multicast and unicast frames for bridged ports. As per the above
description, this is fine for IPv4 networking, since the broadcasted
ARP queries will be sent to and received by all stations on the same
network. However, this breaks IPv6 very badly - blocking neighbour
solicitations and later causing connections to stall.
The defaults that the Linux bridge code expect from bridges are for
unknown unicast and unknown multicast frames to be flooded to all ports
on the bridge, which is at odds to the defaults adopted by our DSA
implementation for mv88e6xxx switches.
This commit enables by default flooding of both unknown unicast and
unknown multicast frames whenever a port is added to a bridge, and
disables the flooding when a port leaves the bridge. This means that
mv88e6xxx DSA switches now behave as per the bridge(8) man page, and
IPv6 works flawlessly through such a switch.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Linux bridge implementation allows various properties of the bridge
to be controlled, such as flooding unknown unicast and multicast frames.
This patch adds the necessary DSA infrastructure to allow the Linux
bridge support to control these properties for DSA switches.
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[florian: Add missing dp and ds variables declaration to fix build]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit replaces schedule_timeout() with wait_woken()
in function tipc_wait_for_rcvmsg(). wait_woken() uses
memory barriers in its implementation to avoid potential
race condition when putting a process into sleeping state
and then waking it up.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 844cf763fb ("tipc: make macro tipc_wait_for_cond() smp safe")
replaced finish_wait() with remove_wait_queue() but still used
prepare_to_wait(). This causes unnecessary conditional
checking before adding to wait queue in prepare_to_wait().
This commit replaces prepare_to_wait() with add_wait_queue()
as the pair function with remove_wait_queue().
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
br_ip4_multicast_mrd_rcv only return 0 and -ENOMSG,
no other negative value
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This case block has been terminated by a return, so not need
a switch fall-through
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error code isn't set on this path so it would result in returning
ERR_PTR(0) and a NULL dereference in the caller.
Fixes: 18d3eefb17 ("net: sched: refactor tcf_block_find() into standalone functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the only way to clear the forwarding cache was to delete the
entries one by one using the MRT_DEL_MFC socket option or to destroy and
recreate the socket.
Create a new socket option which with the use of optional flags can
clear any combination of multicast entries (static or not static) and
multicast vifs (static or not static).
Calling the new socket option MRT_FLUSH with the flags MRT_FLUSH_MFC and
MRT_FLUSH_VIFS will clear all entries and vifs on the socket except for
static entries.
Signed-off-by: Callum Sinclair <callum.sinclair@alliedtelesis.co.nz>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid sending attributes related to recovery:
DEVLINK_ATTR_HEALTH_REPORTER_GRACEFUL_PERIOD and
DEVLINK_ATTR_HEALTH_REPORTER_AUTO_RECOVER in reply to
DEVLINK_CMD_HEALTH_REPORTER_GET for a reporter which didn't register a
recover operation.
These parameters can't be configured on a reporter that did not provide
a recover operation, thus not needed to return them.
Fixes: 7afe335a8b ("devlink: Add health get command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename devlink health attributes for better reflect the attributes use.
Add COUNT prefix on error counter attribute and recovery counter
attribute.
Fixes: 7afe335a8b ("devlink: Add health get command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC-D devices are identified by their PCI IDs in the pnet table. In
order to make usage of the pnet table more consistent for users, this
patch adds this form of identification for ib devices as well.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds namespace support to the pnet table code. Each network
namespace gets its own pnet table. Infiniband and smcd device pnetids
can only be modified in the initial namespace. In other namespaces they
can still be used as if they were set by the underlying hardware.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, users can only set pnetids for netdevs and ib devices in the
pnet table. This patch adds support for smcd devices to the pnet table.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a device does not have a pnetid, users can set a temporary pnetid for
said device in the pnet table. This patch reworks the pnet table to make
it more flexible. Multiple entries with the same pnetid but differing
devices are now allowed. Additionally, the netlink interface now sends
each mapping from pnetid to device separately to the user while
maintaining the message format existing applications might expect. Also,
the SMC data structure for ib devices already has a pnetid attribute.
So, it is used to store the user defined pnetids. As a result, the pnet
table entries are only used for netdevs.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use local variable pflags from the beginning of function
smcr_tx_sndbuf_nonempty
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_poll() returns with mask bit EPOLLPRI if the connection urg_state
is SMC_URG_VALID. Since SMC_URG_VALID is zero, smc_poll signals
EPOLLPRI errorneously if called in state SMC_INIT before the connection
is created, for instance in a non-blocking connect scenario.
This patch switches to non-zero values for the urg states.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Fixes: de8474eb9d ("net/smc: urgent data support")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need a RCU critical section around rt6_info->from deference, and
proper annotation.
Fixes: 4ed591c8ab ("net/ipv6: Allow onlink routes to have a device mismatch if it is the default route")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We must access rt6_info->from under RCU read lock: move the
dereference under such lock, with proper annotation.
v1 -> v2:
- avoid using multiple, racy, fetch operations for rt->from
Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlxu23wTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi04sB/9/Lm694io6coIW/8mTVjKs9iF7+AkA
V11Pu3VHnp8okcNs3iSv6rtbPgLrONP5fg7OC9xAzzsEjA8kitnV7kC0RunzuUiw
BnZcE0v5Eh4NB34DW4w4I0JDkEH75zlsw/ar8HDvgxTw9hCgV56n1oic+MkqAuiL
5TwBjuLL5Nl4tA9djcMtHhBy3u+jQXAEDJ9tiKFBhzQOPo73N2IyZyY+Kz3qqygV
XLWvpmW6PA9jJt8pUGRCqpahaYAY7+cyzOUJbqdRUpeESVl/2Epr7zJZo9LHQtsE
GympS5weYMg6xLoZHQXvLbb77E/SlXkeVyNzBw7LnV6us2PS4tbgSt2J
=alOG
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.0-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two bug fixes for old issues, both marked for stable"
* tag 'ceph-for-5.0-rc8' of git://github.com/ceph/ceph-client:
ceph: avoid repeatedly adding inode to mdsc->snap_flush_list
libceph: handle an empty authorize reply
This reverts commit e2ce367488.
It turns out that the sock destructor xsk_destruct was needed after
all. The cleanup simplification broke the skb transmit cleanup path,
due to that the umem was prematurely destroyed.
The umem cannot be destroyed until all outstanding skbs are freed,
which means that we cannot remove the umem until the sk_destruct has
been called.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
(cherry picked from commit 033b228e7f)
When tcindex_destroy() destroys all the filter results in
the perfect hash table, it invokes the walker to delete
each of them. However, results with class==0 are skipped
in either tcindex_walk() or tcindex_delete(), which causes
a memory leak reported by kmemleak.
This patch fixes it by skipping the walker and directly
deleting these filter results so we don't miss any filter
result.
As a result of this change, we have to initialize exts->net
properly in tcindex_alloc_perfect_hash(). For net-next, we
need to consider whether we should initialize ->net in
tcf_exts_init() instead, before that just directly test
CONFIG_NET_CLS_ACT=y.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 8015d93ebd)
tcindex_destroy() invokes tcindex_destroy_element() via
a walker to delete each filter result in its perfect hash
table, and tcindex_destroy_element() calls tcindex_delete()
which schedules tcf RCU works to do the final deletion work.
Unfortunately this races with the RCU callback
__tcindex_destroy(), which could lead to use-after-free as
reported by Adrian.
Fix this by migrating this RCU callback to tcf RCU work too,
as that workqueue is ordered, we will not have use-after-free.
Note, we don't need to hold netns refcnt because we don't call
tcf_exts_destroy() here.
Fixes: 27ce4f05e2 ("net_sched: use tcf_queue_work() in tcindex filter")
Reported-by: Adrian <bugs@abtelecom.ro>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several u->addr and u->path users are not holding any locks in
common with unix_bind(). unix_state_lock() is useless for those
purposes.
u->addr is assign-once and *(u->addr) is fully set up by the time
we set u->addr (all under unix_table_lock). u->path is also
set in the same critical area, also before setting u->addr, and
any unix_sock with ->path filled will have non-NULL ->addr.
So setting ->addr with smp_store_release() is all we need for those
"lockless" users - just have them fetch ->addr with smp_load_acquire()
and don't even bother looking at ->path if they see NULL ->addr.
Users of ->addr and ->path fall into several classes now:
1) ones that do smp_load_acquire(u->addr) and access *(u->addr)
and u->path only if smp_load_acquire() has returned non-NULL.
2) places holding unix_table_lock. These are guaranteed that
*(u->addr) is seen fully initialized. If unix_sock is in one of the
"bound" chains, so's ->path.
3) unix_sock_destructor() using ->addr is safe. All places
that set u->addr are guaranteed to have seen all stores *(u->addr)
while holding a reference to u and unix_sock_destructor() is called
when (atomic) refcount hits zero.
4) unix_release_sock() using ->path is safe. unix_bind()
is serialized wrt unix_release() (normally - by struct file
refcount), and for the instances that had ->path set by unix_bind()
unix_release_sock() comes from unix_release(), so they are fine.
Instances that had it set in unix_stream_connect() either end up
attached to a socket (in unix_accept()), in which case the call
chain to unix_release_sock() and serialization are the same as in
the previous case, or they never get accept'ed and unix_release_sock()
is called when the listener is shut down and its queue gets purged.
In that case the listener's queue lock provides the barriers needed -
unix_stream_connect() shoves our unix_sock into listener's queue
under that lock right after having set ->path and eventual
unix_release_sock() caller picks them from that queue under the
same lock right before calling unix_release_sock().
5) unix_find_other() use of ->path is pointless, but safe -
it happens with successful lookup by (abstract) name, so ->path.dentry
is guaranteed to be NULL there.
earlier-variant-reviewed-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 121d57af30 ("gso: validate gso_type in GSO handlers") added
gso_type validation to existing gso_segment callback functions, to
filter out illegal and potentially dangerous SKB_GSO_DODGY packets.
Convert tunnels that now call inet_gso_segment and ipv6_gso_segment
directly to have their own callbacks and extend validation to these.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a DSA port is added to a bridge and brought up, the resulting STP
state programmed into the hardware depends on the order that these
operations are performed. However, the Linux bridge code believes that
the port is in disabled mode.
If the DSA port is first added to a bridge and then brought up, it will
be in blocking mode. If it is brought up and then added to the bridge,
it will be in disabled mode.
This difference is caused by DSA always setting the STP mode in
dsa_port_enable() whether or not this port is part of a bridge. Since
bridge always sets the STP state when the port is added, brought up or
taken down, it is unnecessary for us to manipulate the STP state.
Apparently, this code was copied from Rocker, and the very next day a
similar fix for Rocker was merged but was not propagated to DSA. See
e47172ab7e ("rocker: put port in FORWADING state after leaving bridge")
Fixes: b73adef677 ("net: dsa: integrate with SWITCHDEV for HW bridging")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix suspend and resume in mt76x0u USB driver, from Stanislaw
Gruszka.
2) Missing memory barriers in xsk, from Magnus Karlsson.
3) rhashtable fixes in mac80211 from Herbert Xu.
4) 32-bit MIPS eBPF JIT fixes from Paul Burton.
5) Fix for_each_netdev_feature() on big endian, from Hauke Mehrtens.
6) GSO validation fixes from Willem de Bruijn.
7) Endianness fix for dwmac4 timestamp handling, from Alexandre Torgue.
8) More strict checks in tcp_v4_err(), from Eric Dumazet.
9) af_alg_release should NULL out the sk after the sock_put(), from Mao
Wenan.
10) Missing unlock in mac80211 mesh error path, from Wei Yongjun.
11) Missing device put in hns driver, from Salil Mehta.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
sky2: Increase D3 delay again
vhost: correctly check the return value of translate_desc() in log_used()
net: netcp: Fix ethss driver probe issue
net: hns: Fixes the missing put_device in positive leg for roce reset
net: stmmac: Fix a race in EEE enable callback
qed: Fix iWARP syn packet mac address validation.
qed: Fix iWARP buffer size provided for syn packet processing.
r8152: Add support for MAC address pass through on RTL8153-BD
mac80211: mesh: fix missing unlock on error in table_path_del()
net/mlx4_en: fix spelling mistake: "quiting" -> "quitting"
net: crypto set sk to NULL when af_alg_release.
net: Do not allocate page fragments that are not skb aligned
mm: Use fixed constant in page_frag_alloc instead of size + 1
tcp: tcp_v4_err() should be more careful
tcp: clear icsk_backoff in tcp_write_queue_purge()
net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()
qmi_wwan: apply SET_DTR quirk to Sierra WP7607
net: stmmac: handle endianness in dwmac4_get_timestamp
doc: Mention MSG_ZEROCOPY implementation for UDP
mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable
...
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2019-02-19
An update from ieee802154 for *net-next*
Another quite quite cycle in the ieee802154 subsystem.
Peter did a rework of the IP frag queue handling to make it use rbtree and get
in line with the core IPv4 and IPv6 implementatiosn in the kernel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
when capable check failed, dev_put should
be call before return -EACCES.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb->queue_mapping already have read access, via __sk_buff->queue_mapping.
This patch allow BPF tc qdisc clsact write access to the queue_mapping via
tc_cls_act_is_valid_access. Also handle that the value NO_QUEUE_MAPPING
is not allowed.
It is already possible to change this via TC filter action skbedit
tc-skbedit(8). Due to the lack of TC examples, lets show one:
# tc qdisc add dev ixgbe1 clsact
# tc filter add dev ixgbe1 ingress matchall action skbedit queue_mapping 5
# tc filter list dev ixgbe1 ingress
The most common mistake is that XPS (Transmit Packet Steering) takes
precedence over setting skb->queue_mapping. XPS is configured per DEVICE
via /sys/class/net/DEVICE/queues/tx-*/xps_cpus via a CPU hex mask. To
disable set mask=00.
The purpose of changing skb->queue_mapping is to influence the selection of
the net_device "txq" (struct netdev_queue), which influence selection of
the qdisc "root_lock" (via txq->qdisc->q.lock) and txq->_xmit_lock. When
using the MQ qdisc the txq->qdisc points to different qdiscs and associated
locks, and HARD_TX_LOCK (txq->_xmit_lock), allowing for CPU scalability.
Due to lack of TC examples, lets show howto attach clsact BPF programs:
# tc qdisc add dev ixgbe2 clsact
# tc filter add dev ixgbe2 egress bpf da obj XXX_kern.o sec tc_qmap2cpu
# tc filter list dev ixgbe2 egress
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Each tls context maintains two cipher contexts (one each for tx and rx
directions). For each tls session, the constants such as protocol
version, ciphersuite, iv size, associated data size etc are same for
both the directions and need to be stored only once per tls context.
Hence these are moved from 'struct cipher_context' to 'struct
tls_prot_info' and stored only once in 'struct tls_context'.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch aligns IP defragmenation logic in 6lowpan with that
of IPv4 and IPv6: see
commit d4289fcc9b ("net: IP6 defrag: use rbtrees for IPv6 defrag")
Modifying ip_defrag selftest seemed like an overkill, as I suspect
most kernel test setups do not have 6lowpan hwsim enabled. So I ran
the following code/script manually:
insmod ./mac802154_hwsim.ko
iwpan dev wpan0 set pan_id 0xbeef
ip link add link wpan0 name lowpan0 type lowpan
ip link set wpan0 up
ip link set lowpan0 up
iwpan dev wpan1 set pan_id 0xbeef
ip netns add foo
iwpan phy1 set netns name foo
ip netns exec foo ip link add link wpan1 name lowpan1 type lowpan
ip netns exec foo ip link set wpan1 up
ip netns exec foo ip link set lowpan1 up
ip -6 addr add "fb01::1/128" nodad dev lowpan0
ip -netns foo -6 addr add "fb02::1/128" nodad dev lowpan1
ip -6 route add "fb02::1/128" dev lowpan0
ip -netns foo -6 route add "fb01::1/128" dev lowpan1
# then in term1:
ip netns exec foo bash
./udp_stream -6
# in term2:
./udp_stream -c -6 -H fb02::1
# pr_warn_once showed that the code changed by this patch
# was invoked.
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Follow up patch to fix a compilation warning in a recent IPVS fix:
098e13f5b2 ("ipvs: fix dependency on nf_defrag_ipv6").
2) Bogus ENOENT error on flush after rule deletion in the same batch,
reported by Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RPS not work for DSA devices since the 'skb_get_hash'
will always get the invalid hash for dsa tagged packets.
"[PATCH] tag_mtk: add flow_dissect callback to the ops struct"
introduced the flow_dissect callback to get the right hash for
MTK tagged packet. Tag_dsa and tag_edsa also need to implement
the callback.
Signed-off-by: Rundong Ge <rdong.ge@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
spin_lock_bh() is used in table_path_del() but rcu_read_unlock()
is used for unlocking. Fix it by using spin_unlock_bh() instead
of rcu_read_unlock() in the error handling case.
Fixes: b4c3fbe636 ("mac80211: Use linked list instead of rhashtable walk for mesh tables")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff
makes process unkillable. The problem is that when CONFIG_PREEMPT is
enabled, we never see need_resched() return true. This is due to the
fact that preempt_enable() (which we do in bpf_test_run_one on each
iteration) now handles resched if it's needed.
Let's disable preemption for the whole run, not per test. In this case
we can properly see whether resched is needed.
Let's also properly return -EINTR to the userspace in case of a signal
interrupt.
See recent discussion:
http://lore.kernel.org/netdev/CAH3MdRWHr4N8jei8jxDppXjmw-Nw=puNDLbu1dQOFQHxfU2onA@mail.gmail.com
I'll follow up with the same fix bpf_prog_test_run_flow_dissector in
bpf-next.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for you net-next
tree:
1) Missing NFTA_RULE_POSITION_ID netlink attribute validation,
from Phil Sutter.
2) Restrict matching on tunnel metadata to rx/tx path, from wenxu.
3) Avoid indirect calls for IPV6=y, from Florian Westphal.
4) Add two indirections to prepare merger of IPV4 and IPV6 nat
modules, from Florian Westphal.
5) Broken indentation in ctnetlink, from Colin Ian King.
6) Patches to use struct_size() from netfilter and IPVS,
from Gustavo A. R. Silva.
7) Display kernel splat only once in case of racing to confirm
conntrack from bridge plus nfqueue setups, from Chieh-Min Wang.
8) Skip checksum validation for layer 4 protocols that don't need it,
patch from Alin Nastac.
9) Sparse warning due to symbol that should be static in CLUSTERIP,
from Wei Yongjun.
10) Add new toggle to disable SDP payload translation when media
endpoint is reachable though the same interface as the signalling
peer, from Alin Nastac.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The authorize reply can be empty, for example when the ticket used to
build the authorizer is too old and TAG_BADAUTHORIZER is returned from
the service. Calling ->verify_authorizer_reply() results in an attempt
to decrypt and validate (somewhat) random data in au->buf (most likely
the signature block from calc_signature()), which fails and ends up in
con_fault_finish() with !con->auth_retry. The ticket isn't invalidated
and the connection is retried again and again until a new ticket is
obtained from the monitor:
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.
Cc: stable@vger.kernel.org
Fixes: 5c056fdc5b ("libceph: verify authorize reply on connect")
Link: https://tracker.ceph.com/issues/20164
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = alloc(size, GFP_KERNEL)
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
size = struct_size(instance, entry, count);
instance = alloc(size, GFP_KERNEL)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, change the following form:
sizeof(*ev) + ev->num_hndl * sizeof(struct hci_comp_pkts_info)
to :
struct_size(ev, handles, ev->num_hndl)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
After moving an XFRM interface to another namespace it stays associated
with the original namespace (net in `struct xfrm_if` and the list keyed
with `xfrmi_net_id`), allowing processes in the new namespace to use
SAs/policies that were created in the original namespace. For instance,
this allows a keying daemon in one namespace to establish IPsec SAs for
other namespaces without processes there having access to the keys or IKE
credentials.
This worked fine for outbound traffic, however, for inbound traffic the
lookup for the interfaces and the policies used the incorrect namespace
(the one the XFRM interface was moved to).
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch addresses the fact that there are drivers, specifically tun,
that will call into the network page fragment allocators with buffer sizes
that are not cache aligned. Doing this could result in data alignment
and DMA performance issues as these fragment pools are also shared with the
skb allocator and any other devices that will use napi_alloc_frags or
netdev_alloc_frags.
Fixes: ffde7328a3 ("net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ICMP handlers are not very often stressed, we should
make them more resilient to bugs that might surface in
the future.
If there is no packet in retransmit queue, we should
avoid a NULL deref.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
soukjin bae reported a crash in tcp_v4_err() handling
ICMP_DEST_UNREACH after tcp_write_queue_head(sk)
returned a NULL pointer.
Current logic should have prevented this :
if (seq != tp->snd_una || !icsk->icsk_retransmits ||
!icsk->icsk_backoff || fastopen)
break;
Problem is the write queue might have been purged
and icsk_backoff has not been cleared.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets an error message in extack when the number of qdisc
handles exceeds the maximum. Also the error-code ENOSPC is more
appropriate than ENOMEM in this situation.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reported-by: Li Shuang <shuali@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If driver does not support ethtool flash update operation
call into devlink.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink flash update command. Advanced NICs have firmware
stored in flash and often cryptographically secured. Updating
that flash is handled by management firmware. Ethtool has a
flash update command which served us well, however, it has two
shortcomings:
- it takes rtnl_lock unnecessarily - really flash update has
nothing to do with networking, so using a networking device
as a handle is suboptimal, which leads us to the second one:
- it requires a functioning netdev - in case device enters an
error state and can't spawn a netdev (e.g. communication
with the device fails) there is no netdev to use as a handle
for flashing.
Devlink already has the ability to report the firmware versions,
now with the ability to update the firmware/flash we will be
able to recover devices in bad state.
To enable updates of sub-components of the FW allow passing
component name. This name should correspond to one of the
versions reported in devlink info.
v1: - replace target id with component name (Jiri).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that filter is not NULL before passing it to tcf_walker->fn()
callback in cls_cgroup_walk(). This can happen when cls_cgroup_change()
failed to set first filter.
Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that filter is not NULL before passing it to tcf_walker->fn()
callback. This can happen when mall_change() failed to offload filter to
hardware.
Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some classifiers set arg->stop in their implementation of tp->walk() API
when empty. Most of classifiers do not adhere to that convention. Do not
set arg->stop in route4_walk() to unify tp->walk() behavior among
classifier implementations.
Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some classifiers set arg->stop in their implementation of tp->walk() API
when empty. Most of classifiers do not adhere to that convention. Do not
set arg->stop in fw_walk() to unify tp->walk() behavior among classifier
implementations.
Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use existing skb_put_data() and skb_trim() instead of open-coding them,
with the skb_put_data() first so that logically, `skb` still contains the
data to be copied in its data..tail area when skb_put_data() reads it.
This change on its own is a cleanup, and it is also necessary for potential
future integration of skbuffs with things like KASAN.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hook tracepoints at the end of functions that
update a neigh entry. neigh_update gets an additional
tracepoint to trace the update flags and old and new
neigh states.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The goal here is to trace neigh state changes covering all possible
neigh update paths. Plus have a specific trace point in neigh_update
to cover flags sent to neigh_update.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-02-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.
2) test all bpf progs in alu32 mode, from Jiong.
3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.
4) support for IP encap in lwt bpf progs, from Peter.
5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-02-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix lockdep false positive in bpf_get_stackid(), from Alexei.
2) several AF_XDP fixes, from Bjorn, Magnus, Davidlohr.
3) fix narrow load from struct bpf_sock, from Martin.
4) mips JIT fixes, from Paul.
5) gso handling fix in bpf helpers, from Willem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's confusing to call PTR_ERR(v). The PTR_ERR() function is basically
a fancy cast to long so it makes you wonder, was IS_ERR() intended? But
that doesn't make sense because vcc_walk() doesn't return error
pointers.
This patch doesn't affect runtime, it's just a cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SO_SNDBUF and SO_RCVBUF (and their *BUFFORCE version) may overflow or
underflow their input value. This patch aims at providing explicit
handling of these extreme cases, to get a clear behaviour even with
values bigger than INT_MAX / 2 or lower than INT_MIN / 2.
For simplicity, only SO_SNDBUF and SO_SNDBUFFORCE are described here,
but the same explanation and fix apply to SO_RCVBUF and SO_RCVBUFFORCE
(with 'SNDBUF' replaced by 'RCVBUF' and 'wmem_max' by 'rmem_max').
Overflow of positive values
===========================
When handling SO_SNDBUF or SO_SNDBUFFORCE, if 'val' exceeds
INT_MAX / 2, the buffer size is set to its minimum value because
'val * 2' overflows, and max_t() considers that it's smaller than
SOCK_MIN_SNDBUF. For SO_SNDBUF, this can only happen with
net.core.wmem_max > INT_MAX / 2.
SO_SNDBUF and SO_SNDBUFFORCE are actually designed to let users probe
for the maximum buffer size by setting an arbitrary large number that
gets capped to the maximum allowed/possible size. Having the upper
half of the positive integer space to potentially reduce the buffer
size to its minimum value defeats this purpose.
This patch caps the base value to INT_MAX / 2, so that bigger values
don't overflow and keep setting the buffer size to its maximum.
Underflow of negative values
============================
For negative numbers, SO_SNDBUF always considers them bigger than
net.core.wmem_max, which is bounded by [SOCK_MIN_SNDBUF, INT_MAX].
Therefore such values are set to net.core.wmem_max and we're back to
the behaviour of positive integers described above (return maximum
buffer size if wmem_max <= INT_MAX / 2, return SOCK_MIN_SNDBUF
otherwise).
However, SO_SNDBUFFORCE behaves differently. The user value is
directly multiplied by two and compared with SOCK_MIN_SNDBUF. If
'val * 2' doesn't underflow or if it underflows to a value smaller
than SOCK_MIN_SNDBUF then buffer size is set to its minimum value.
Otherwise the buffer size is set to the underflowed value.
This patch treats negative values passed to SO_SNDBUFFORCE as null, to
prevent underflows. Therefore negative values now always set the buffer
size to its minimum value.
Even though SO_SNDBUF behaves inconsistently by setting buffer size to
the maximum value when passed a negative number, no attempt is made to
modify this behaviour. There may exist some programs that rely on using
negative numbers to set the maximum buffer size. Avoiding overflows
because of extreme net.core.wmem_max values is the most we can do here.
Summary of altered behaviours
=============================
val : user-space value passed to setsockopt()
val_uf : the underflowed value resulting from doubling val when
val < INT_MIN / 2
wmem_max : short for net.core.wmem_max
val_cap : min(val, wmem_max)
min_len : minimal buffer length (that is, SOCK_MIN_SNDBUF)
max_len : maximal possible buffer length, regardless of wmem_max (that
is, INT_MAX - 1)
^^^^ : altered behaviour
SO_SNDBUF:
+-------------------------+-------------+------------+----------------+
| CONDITION | OLD RESULT | NEW RESULT | COMMENT |
+-------------------------+-------------+------------+----------------+
| val < 0 && | | | No overflow, |
| wmem_max <= INT_MAX/2 | wmem_max*2 | wmem_max*2 | keep original |
| | | | behaviour |
+-------------------------+-------------+------------+----------------+
| val < 0 && | | | Cap wmem_max |
| INT_MAX/2 < wmem_max | min_len | max_len | to prevent |
| | | ^^^^^^^ | overflow |
+-------------------------+-------------+------------+----------------+
| 0 <= val <= min_len/2 | min_len | min_len | Ordinary case |
+-------------------------+-------------+------------+----------------+
| min_len/2 < val && | val_cap*2 | val_cap*2 | Ordinary case |
| val_cap <= INT_MAX/2 | | | |
+-------------------------+-------------+------------+----------------+
| min_len < val && | | | Cap val_cap |
| INT_MAX/2 < val_cap | min_len | max_len | again to |
| (implies that | | ^^^^^^^ | prevent |
| INT_MAX/2 < wmem_max) | | | overflow |
+-------------------------+-------------+------------+----------------+
SO_SNDBUFFORCE:
+------------------------------+---------+---------+------------------+
| CONDITION | BEFORE | AFTER | COMMENT |
| | PATCH | PATCH | |
+------------------------------+---------+---------+------------------+
| val < INT_MIN/2 && | min_len | min_len | Underflow with |
| val_uf <= min_len | | | no consequence |
+------------------------------+---------+---------+------------------+
| val < INT_MIN/2 && | val_uf | min_len | Set val to 0 to |
| val_uf > min_len | | ^^^^^^^ | avoid underflow |
+------------------------------+---------+---------+------------------+
| INT_MIN/2 <= val < 0 | min_len | min_len | No underflow |
+------------------------------+---------+---------+------------------+
| 0 <= val <= min_len/2 | min_len | min_len | Ordinary case |
+------------------------------+---------+---------+------------------+
| min_len/2 < val <= INT_MAX/2 | val*2 | val*2 | Ordinary case |
+------------------------------+---------+---------+------------------+
| INT_MAX/2 < val | min_len | max_len | Cap val to |
| | | ^^^^^^^ | prevent overflow |
+------------------------------+---------+---------+------------------+
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
that could prevent clients from reclaiming state after a kernel upgrade.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcZzZHAAoJECebzXlCjuG+EOsQALVuwSJqQh4GUVMSBYzL6Ov4
SfinB8LJ8/1HwngSvRB3xQ4HiOtpFSNkjzfFYE7epy6augY8tRRnHGbnlHbsG5vI
wQqTR6PbSq2mupgpi2WGRlRh521SDOi8V49fplUC+FuV7dJT/wm0hgdKsHCPHPX4
TEYPglsvG6PLu5IcAofNac9PVZH21s3yVIKvqd6yifED5lhopdNw210s5DtzvugI
g2JgHOhTfana+xQS/cJ1U8JHbbpM7jwOXAJ7IWD8k4GXdAW03X6jNOcseudcBTQY
qSL33//6Xdu0r0uI21z4ZWxSWCOtt8YvnbMoG4EBqh3DpKbUpExh8j4eIyNPSuSF
Y/8iAVJ9KWYhWO+IVPqvHVXz4mCIDK+f7iJ/m+lLjOQmWkpp6koeUDjKs4k9zBUC
mbGTOrh0TJzXvKWKEU5Qy7meZVJGUpV+9ca+cDs5XN7Xa3blTp+5VrRVeDgKO5Kx
OF3Y3IBOWhqN7+kEH98RvdZAmtbO0zg02IEIHOMPxH69JU8o0EsEni1LXsqDJrRi
sLVYXvLwdPLfkqSjpI8xNeaoFXeelopx8Re+2oNEFIEvsfeT5XikbQHoqgFJNsyk
hz7PHwuyGjc6NJRRSBUKYouWKPP4rrM7ZiOSyIEDYIIwyhBirpjrECaHzdi3D5j+
xUyFGMF5F3wk1fdQHPfD
=NopI
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux
Pull more nfsd fixes from Bruce Fields:
"Two small fixes, one for crashes using nfs/krb5 with older enctypes,
one that could prevent clients from reclaiming state after a kernel
upgrade"
* tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
Revert "nfsd4: return default lease period"
- Make sure Send CQ is allocated on an existing compvec
- Properly check debugfs dentry before using it
- Don't use page_file_mapping() after removing a page
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAlxnMQ0ACgkQ18tUv7Cl
QOsbhQ//VhgoXX25xHrApLz8wMuYPNOboDFSUf0O1GWoHi3opHnP+9LPf/iZkRQy
YS0ufcO95i1LGjZLb8ac9hBWkko8TBl/dIONsG4ppf2bAbiVuag848wehi8hsGba
zaSsXV6qdibq4qZsyK35hh0cHVHDgB1EMTu7AVORdvXsTHVX3xL86vts2y2VSLKv
w9yKQBg4E4pWwENi7v77icSuGg/WpwfKnYxBzG6JPXuHQLGidyc/HrnVmLwhd6DQ
0Sa6nzOAvgjjgVibB+tJfsitScmMTsaxulvHsm5iLjPJZ8SUjxYvAPl3AZdCYPvU
XaADy8nrvXJUe9APhMINbkoxnF4W/OPnUMG3bWkWp2LeNZvk5l7VOzTW5Sh49Xyk
pBAOd7qr3kfjFdvzypVz9NeXuS6BsTUA6LAudo8rF7nxi8jHPp6L+zZNWVrPIjY0
+bNIj3K1Bji3jU9vTHyTzxDRB/4ZnzJaPF2Gv/5Y2cvkI7mfzHUz5p6cAU1OPIVB
kuhZXkQFEPSS2OV6MUOe/HgmtY0oLM3XU9cEaFkLz59D1kb1fjO/yUu9YBQMq6Ke
o6b7Dwh4WvLVN/AbgegKOnp5G0/ljmz6y7ML0AElYXg1iT4k0zE+qJpMWhOTRJnd
+jf4hSS+l7p7D1ed+uqdMS/jc1s5vcuxwYDQUIutELjA/TCbLNI=
=28v+
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull more NFS client fixes from Anna Schumaker:
"Three fixes this time.
Nicolas's is for xprtrdma completion vector allocation on single-core
systems. Greg's adds an error check when allocating a debugfs dentry.
And Ben's is an additional fix for nfs_page_async_flush() to prevent
pages from accidentally getting truncated.
Summary:
- Make sure Send CQ is allocated on an existing compvec
- Properly check debugfs dentry before using it
- Don't use page_file_mapping() after removing a page"
* tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Don't use page_file_mapping after removing the page
rpc: properly check debugfs dentry before using it
xprtrdma: Make sure Send CQ is allocated on an existing compvec
When enabled, the sip_external_media logic will leave SDP
payload untouched when it detects that interface towards INVITEd
party is the same with the one towards media endpoint.
The typical scenario for this logic is when a LAN SIP agent has more
than one IP address (uses a different address for media streams than
the one used on signalling stream) and it also forwards calls to a
voice mailbox located on the WAN side. In such case sip_direct_media
must be disabled (so normal calls could be handled by the SIP
helper), but media streams that are not traversing this router must
also be excluded from address translation (e.g. call forwards).
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes the following sparse warnings:
net/ipv4/netfilter/ipt_CLUSTERIP.c:867:23: warning:
symbol 'cip_netdev_notifier' was not declared. Should it be static?
Fixes: 5a86d68bcf ("netfilter: ipt_CLUSTERIP: fix deadlock in netns exit routine")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When CONFIG_IP_VS_IPV6 is not defined, build produced this warning:
net/netfilter/ipvs/ip_vs_ctl.c:899:6: warning: unused variable ‘ret’ [-Wunused-variable]
int ret = 0;
^~~
Fix this by moving the declaration of 'ret' in the CONFIG_IP_VS_IPV6
section in the same function.
While at it, drop its unneeded initialisation.
Fixes: 098e13f5b2 ("ipvs: fix dependency on nf_defrag_ipv6")
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
rt6_cache_allowed_for_pmtu() checks for rt->from presence, but
it does not access the RCU protected pointer. We can use
rcu_access_pointer() and clean-up the code a bit. No functional
changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).
This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.
Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit c706863bc8 ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bdae9 ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine
Fixes: c706863bc8 ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lightweight tunnels are L3 constructs that are used with IP/IP6.
For example, lwtunnel_xmit is called from ip_output.c and
ip6_output.c only.
Make the dependency explicit at least for LWT-BPF, as now they
call into IP routing.
V2: added "Reported-by" below.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The netfilter conflicts were rather simple overlapping
changes.
However, the cls_tcindex.c stuff was a bit more complex.
On the 'net' side, Cong is fixing several races and memory
leaks. Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.
What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU. I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
While trying to reproduce a reported kernel panic on arm64, I discovered
that AUTH_GSS basically doesn't work at all with older enctypes on arm64
systems with CONFIG_VMAP_STACK enabled. It turns out there still a few
places using stack memory with scatterlists, causing krb5_encrypt() and
krb5_decrypt() to produce incorrect results (or a BUG if CONFIG_DEBUG_SG
is enabled).
Tested with cthon on v4.0/v4.1/v4.2 with krb5/krb5i/krb5p using
des3-cbc-sha1 and arcfour-hmac-md5.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Flush after rule deletion bogusly hits -ENOENT. Skip rules that have
been already from nft_delrule_by_chain() which is always called from the
flush path.
Fixes: cf9dc09d09 ("netfilter: nf_tables: fix missing rules flushing per table")
Reported-by: Phil Sutter <phil@nwl.cc>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.
The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.
In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.
To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.
Tested on ath10k using WCN3990.
Cc: stable@vger.kernel.org
Fixes: 0c317a02ca ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When rhashtable insertion fails the mesh table code doesn't free
the now-orphan mesh path object. This patch fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The mesh table code walks over hash tables for two purposes. First of
all it's used as part of a netlink dump process, but it is also used
for looking up entries to delete using criteria other than the hash
key.
The second purpose is directly contrary to the design specification
of rhashtable walks. It is only meant for use by netlink dumps.
This is because rhashtable is resizable and you cannot obtain a
stable walk over it during a resize process.
In fact mesh's use of rhashtable for dumping is bogus too. Rather
than using rhashtable walk's iterator to keep track of the current
position, it always converts the current position to an integer
which defeats the purpose of the iterator.
Therefore this patch converts all uses of rhashtable walk into a
simple linked list.
This patch also adds a new spin lock to protect the hash table
insertion/removal as well as the walk list modifications. In fact
the previous code was buggy as the removals can race with each
other, potentially resulting in a double-free.
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On error the skb should be freed. Tested with diff/steps
provided by David Ahern.
v2: surface routing errors to the user instead of a generic EINVAL,
as suggested by David Ahern.
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: 3bd0b15281 ("bpf: add handling of BPF_LWT_REROUTE to lwt_bpf.c")
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While finding the devlink device during region reading,
devlink device list is accessed and devlink device is
returned without holding a lock. This could lead to use-after-free
accesses.
While at it, add lockdep assert to ensure that all future callers hold
the lock when calling devlink_get_from_attrs().
Fixes: 4e54795a27 ("devlink: Add support for region snapshot read command")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_nl_cmd_region_read_dumpit() misses to return right error code on
most error conditions.
Return the right error code on such errors.
Fixes: 4e54795a27 ("devlink: Add support for region snapshot read command")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt
- fix typo, by Sven Eckelmann
- netlink restructuring patch series (part 2), by Sven Eckelmann
(19 patches)
-----BEGIN PGP SIGNATURE-----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=+p14
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20190213' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt
- fix typo, by Sven Eckelmann
- netlink restructuring patch series (part 2), by Sven Eckelmann
(19 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Alexander Duyck, the DMA mapping done in page_pool needs
to use the DMA attribute DMA_ATTR_SKIP_CPU_SYNC.
As the principle behind page_pool keeping the pages mapped is that the
driver takes over the DMA-sync steps.
Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by David Miller the current page_pool implementation
stores dma_addr_t in page->private.
This won't work on 32-bit platforms with 64-bit DMA addresses since the
page->private is an unsigned long and the dma_addr_t a u64.
A previous patch is adding dma_addr_t on struct page to accommodate this.
This patch adapts the page_pool related functions to use the newly added
struct for storing and retrieving DMA addresses from network drivers.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently introduced tc_setup_flow_action() can fail when parsing tcf_exts
on some unsupported action commands. However, this should not affect the
case when user did not explicitly request hw offload by setting skip_sw
flag. Modify tc_setup_flow_action() callers to only propagate the error if
skip_sw flag is set for filter that is being offloaded, and set extack
error message in that case.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Fixes: 3a7b68617d ("cls_api: add translator to flow_action representation")
Signed-off-by: David S. Miller <davem@davemloft.net>
With many active TCP sockets, fat TCP sockets could fool
__sk_mem_raise_allocated() thanks to an overflow.
They would increase their share of the memory, instead
of decreasing it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch builds on top of the previous patch in the patchset,
which added BPF_LWT_ENCAP_IP mode to bpf_lwt_push_encap. As the
encapping can result in the skb needing to go via a different
interface/route/dst, bpf programs can indicate this by returning
BPF_LWT_REROUTE, which triggers a new route lookup for the skb.
v8 changes: fix kbuild errors when LWTUNNEL_BPF is builtin, but
IPV6 is a module: as LWTUNNEL_BPF can only be either Y or N,
call IPV6 routing functions only if they are built-in.
v9 changes:
- fixed a kbuild test robot compiler warning;
- call IPV6 routing functions via ipv6_stub.
v10 changes: removed unnecessary IS_ENABLED and pr_warn_once.
v11 changes: fixed a potential dst leak.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Proxy ip6_route_input via ipv6_stub, for later use by lwt bpf ip encap
(see the next patch in the patchset).
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds handling of GSO packets in bpf_lwt_push_ip_encap()
(called from bpf_lwt_push_encap):
* IPIP, GRE, and UDP encapsulation types are deduced by looking
into iphdr->protocol or ipv6hdr->next_header;
* SCTP GSO packets are not supported (as bpf_skb_proto_4_to_6
and similar do);
* UDP_L4 GSO packets are also not supported (although they are
not blocked in bpf_skb_proto_4_to_6 and similar), as
skb_decrease_gso_size() will break it;
* SKB_GSO_DODGY bit is set.
Note: it may be possible to support SCTP and UDP_L4 gso packets;
but as these cases seem to be not well handled by other
tunneling/encapping code paths, the solution should
be generic enough to apply to all tunneling/encapping code.
v8 changes:
- make sure that if GRE or UDP encap is detected, there is
enough of pushed bytes to cover both IP[v6] + GRE|UDP headers;
- do not reject double-encapped packets;
- whitelist TCP GSO packets rather than block SCTP GSO and
UDP GSO.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement BPF_LWT_ENCAP_IP mode in bpf_lwt_push_encap BPF helper.
It enables BPF programs (specifically, BPF_PROG_TYPE_LWT_IN and
BPF_PROG_TYPE_LWT_XMIT prog types) to add IP encapsulation headers
to packets (e.g. IP/GRE, GUE, IPIP).
This is useful when thousands of different short-lived flows should be
encapped, each with different and dynamically determined destination.
Although lwtunnels can be used in some of these scenarios, the ability
to dynamically generate encap headers adds more flexibility, e.g.
when routing depends on the state of the host (reflected in global bpf
maps).
v7 changes:
- added a call skb_clear_hash();
- removed calls to skb_set_transport_header();
- refuse to encap GSO-enabled packets.
v8 changes:
- fix build errors when LWT is not enabled.
Note: the next patch in the patchset with deal with GSO-enabled packets,
which are currently rejected at encapping attempt.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds all needed plumbing in preparation to allowing
bpf programs to do IP encapping via bpf_lwt_push_encap. Actual
implementation is added in the next patch in the patchset.
Of note:
- bpf_lwt_push_encap can now be called from BPF_PROG_TYPE_LWT_XMIT
prog types in addition to BPF_PROG_TYPE_LWT_IN;
- if the skb being encapped has GSO set, encapsulation is limited
to IPIP/IP+GRE/IP+GUE (both IPv4 and IPv6);
- as route lookups are different for ingress vs egress, the single
external bpf_lwt_push_encap BPF helper is routed internally to
either bpf_lwt_in_push_encap or bpf_lwt_xmit_push_encap BPF_CALLs,
depending on prog type.
v8 changes: fixed a typo.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In sctp_stream_init(), after sctp_stream_outq_migrate() freed the
surplus streams' ext, but sctp_stream_alloc_out() returns -ENOMEM,
stream->outcnt will not be set to 'outcnt'.
With the bigger value on stream->outcnt, when closing the assoc and
freeing its streams, the ext of those surplus streams will be freed
again since those stream exts were not set to NULL after freeing in
sctp_stream_outq_migrate(). Then the invalid-free issue reported by
syzbot would be triggered.
We fix it by simply setting them to NULL after freeing.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: syzbot+58e480e7b28f2d890bfd@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianlin reported a panic when running sctp gso over gre over vlan device:
[ 84.772930] RIP: 0010:do_csum+0x6d/0x170
[ 84.790605] Call Trace:
[ 84.791054] csum_partial+0xd/0x20
[ 84.791657] gre_gso_segment+0x2c3/0x390
[ 84.792364] inet_gso_segment+0x161/0x3e0
[ 84.793071] skb_mac_gso_segment+0xb8/0x120
[ 84.793846] __skb_gso_segment+0x7e/0x180
[ 84.794581] validate_xmit_skb+0x141/0x2e0
[ 84.795297] __dev_queue_xmit+0x258/0x8f0
[ 84.795949] ? eth_header+0x26/0xc0
[ 84.796581] ip_finish_output2+0x196/0x430
[ 84.797295] ? skb_gso_validate_network_len+0x11/0x80
[ 84.798183] ? ip_finish_output+0x169/0x270
[ 84.798875] ip_output+0x6c/0xe0
[ 84.799413] ? ip_append_data.part.50+0xc0/0xc0
[ 84.800145] iptunnel_xmit+0x144/0x1c0
[ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel]
[ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre]
[ 84.802395] dev_hard_start_xmit+0xa5/0x210
[ 84.803086] sch_direct_xmit+0x14f/0x340
[ 84.803733] __dev_queue_xmit+0x799/0x8f0
[ 84.804472] ip_finish_output2+0x2e0/0x430
[ 84.805255] ? skb_gso_validate_network_len+0x11/0x80
[ 84.806154] ip_output+0x6c/0xe0
[ 84.806721] ? ip_append_data.part.50+0xc0/0xc0
[ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp]
[ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp]
It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment.
sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM',
which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment().
For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set
and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start.
So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when
computing checksum in sctp_gso_segment.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Missing structure initialization in ebtables causes splat with
32-bit user level on a 64-bit kernel, from Francesco Ruggeri.
2) Missing dependency on nf_defrag in IPVS IPv6 codebase, from
Andrea Claudi.
3) Fix possible use-after-free from release path of target extensions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some protocols have other means to verify the payload integrity
(AH, ESP, SCTP) while others are incompatible with nf_ip(6)_checksum
implementation because checksum is either optional or might be
partial (UDPLITE, DCCP, GRE). Because nf_ip(6)_checksum was used
to validate the packets, ip(6)tables REJECT rules were not capable
to generate ICMP(v6) errors for the protocols mentioned above.
This commit also fixes the incorrect pseudo-header protocol used
for IPv4 packets that carry other transport protocols than TCP or
UDP (pseudo-header used protocol 0 iso the proper value).
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
debugfs can now report an error code if something went wrong instead of
just NULL. So if the return value is to be used as a "real" dentry, it
needs to be checked if it is an error before dereferencing it.
This is now happening because of ff9fb72bc0 ("debugfs: return error
values, not NULL"), but why debugfs files are not being created properly
is an older issue, probably one that has always been there and should
probably be looked at...
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make sure the device has at least 2 completion vectors
before allocating to compvec#1
Fixes: a4699f5647 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode)
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
struct tcindex_filter_result contains two parts:
struct tcf_exts and struct tcf_result.
For the local variable 'cr', its exts part is never used but
initialized without being released properly on success path. So
just completely remove the exts part to fix this leak.
For the local variable 'new_filter_result', it is never properly
released if not used by 'r' on success path.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcindex_destroy() destroys all the filter results in
the perfect hash table, it invokes the walker to delete
each of them. However, results with class==0 are skipped
in either tcindex_walk() or tcindex_delete(), which causes
a memory leak reported by kmemleak.
This patch fixes it by skipping the walker and directly
deleting these filter results so we don't miss any filter
result.
As a result of this change, we have to initialize exts->net
properly in tcindex_alloc_perfect_hash(). For net-next, we
need to consider whether we should initialize ->net in
tcf_exts_init() instead, before that just directly test
CONFIG_NET_CLS_ACT=y.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcindex_destroy() invokes tcindex_destroy_element() via
a walker to delete each filter result in its perfect hash
table, and tcindex_destroy_element() calls tcindex_delete()
which schedules tcf RCU works to do the final deletion work.
Unfortunately this races with the RCU callback
__tcindex_destroy(), which could lead to use-after-free as
reported by Adrian.
Fix this by migrating this RCU callback to tcf RCU work too,
as that workqueue is ordered, we will not have use-after-free.
Note, we don't need to hold netns refcnt because we don't call
tcf_exts_destroy() here.
Fixes: 27ce4f05e2 ("net_sched: use tcf_queue_work() in tcindex filter")
Reported-by: Adrian <bugs@abtelecom.ro>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register netlink protocol handlers for message types RTM_NEWTFILTER,
RTM_DELTFILTER, RTM_GETTFILTER as unlocked. Set rtnl_held variable that
tracks rtnl mutex state to be false by default.
Introduce tcf_proto_is_unlocked() helper that is used to check
tcf_proto_ops->flag to determine if ops can be called without taking rtnl
lock. Manually lookup Qdisc, class and block in rule update handlers.
Verify that both Qdisc ops and proto ops are unlocked before using any of
their callbacks, and obtain rtnl lock otherwise.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor tcf_block_find() code into three standalone functions:
- __tcf_qdisc_find() to lookup Qdisc and increment its reference counter.
- __tcf_qdisc_cl_find() to lookup class.
- __tcf_block_find() to lookup block and increment its reference counter.
This change is necessary to allow netlink tc rule update handlers to call
these functions directly in order to conditionally take rtnl lock
according to Qdisc class ops flags before calling any of class ops
functions.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'rtnl_held' flag to tcf proto change, delete, destroy, dump, walk
functions to track rtnl lock status. Extend users of these function in cls
API to propagate rtnl lock status to them. This allows classifiers to
obtain rtnl lock when necessary and to pass rtnl lock status to extensions
and driver offload callbacks.
Add flags field to tcf proto ops. Add flag value to indicate that
classifier doesn't require rtnl lock.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add optional tp->ops->put() API to be implemented for filter reference
counting. This new function is called by cls API to release filter
reference for filters returned by tp->ops->change() or tp->ops->get()
functions. Implement tfilter_put() helper to call tp->ops->put() only for
classifiers that implement it.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Actions API is already updated to not rely on rtnl lock for
synchronization. However, it need to be provided with rtnl status when
called from classifiers API in order to be able to correctly release the
lock when loading kernel module.
Extend extension validation function with 'rtnl_held' flag which is passed
to actions API. Add new 'rtnl_held' parameter to tcf_exts_validate() in cls
API. No classifier is currently updated to support unlocked execution, so
pass hardcoded 'true' flag parameter value.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcf_chain with 'flushing' flag. Use the flag to prevent insertion of
new classifier instances when chain flushing is in progress in order to
prevent resource leak when tcf_proto is created by unlocked users
concurrently.
Return EAGAIN error from tcf_chain_tp_insert_unique() to restart
tc_new_tfilter() and lookup the chain/proto again.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement unique insertion function to atomically attach tcf_proto to chain
after verifying that no other tcf proto with specified priority exists.
Implement delete function that verifies that tp is actually empty before
deleting it. Use these functions to refactor cls API to account for
concurrent tp and rule update instead of relying on rtnl lock. Add new
'deleting' flag to tcf proto. Use it to restart search when iterating over
tp's on chain to prevent accessing potentially inval tp->next pointer.
Extend tcf proto with spinlock that is intended to be used to protect its
data from concurrent modification instead of relying on rtnl mutex. Use it
to protect 'deleting' flag. Add lockdep macros to validate that lock is
held when accessing protected fields.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All users of chain->filters_chain rely on rtnl lock and assume that no new
classifier instances are added when traversing the list. Use
tcf_get_next_proto() to traverse filters list without relying on rtnl
mutex. This function iterates over classifiers by taking reference to
current iterator classifier only and doesn't assume external
synchronization of filters list.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to remove dependency on rtnl lock and allow concurrent tcf_proto
modification, extend tcf_proto with reference counter. Implement helper
get/put functions for tcf proto and use them to modify cls API to always
take reference to tcf_proto while using it. Only release reference to
parent chain after releasing last reference to tp.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcf_chain with new filter_chain_lock mutex. Always lock the chain
when accessing filter_chain list, instead of relying on rtnl lock.
Dereference filter_chain with tcf_chain_dereference() lockdep macro to
verify that all users of chain_list have the lock taken.
Rearrange tp insert/remove code in tc_new_tfilter/tc_del_tfilter to execute
all necessary code while holding chain lock in order to prevent
invalidation of chain_info structure by potential concurrent change. This
also serializes calls to tcf_chain0_head_change(), which allows head change
callbacks to rely on filter_chain_lock for synchronization instead of rtnl
mutex.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When cls API is called without protection of rtnl lock, parallel
modification of chain is possible, which means that chain template can be
changed concurrently in certain circumstances. For example, when chain is
'deleted' by new user-space chain API, the chain might continue to be used
if it is referenced by actions, and can be 're-created' again by user. In
such case same chain structure is reused and its template is changed. To
protect from described scenario, cache chain template while holding block
lock. Introduce standalone tc_chain_notify_delete() function that works
with cached template values, instead of chains themselves.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All users of block->chain_list rely on rtnl lock and assume that no new
chains are added when traversing the list. Use tcf_get_next_chain() to
traverse chain list without relying on rtnl mutex. This function iterates
over chains by taking reference to current iterator chain only and doesn't
assume external synchronization of chain list.
Don't take reference to all chains in block when flushing and use
tcf_get_next_chain() to safely iterate over chain list instead. Remove
tcf_block_put_all_chains() that is no longer used.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to remove dependency on rtnl lock, use block->lock to protect
chain0 struct from concurrent modification. Rearrange code in chain0
callback add and del functions to only access chain0 when block->lock is
held.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to remove dependency on rtnl lock, modify chain API to use
block->lock to protect chain from concurrent modification. Rearrange
tc_ctl_chain() code to call tcf_chain_hold() while holding block->lock to
prevent concurrent chain removal.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to remove dependency on rtnl lock, protect
tcf_chain->explicitly_created flag with block->lock. Consolidate code that
checks and resets 'explicitly_created' flag into __tcf_chain_put() to
execute it atomically with rest of code that puts chain reference.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcf_block doesn't use any synchronization mechanisms to protect
critical sections that manage lifetime of its chains. block->chain_list and
multiple variables in tcf_chain that control its lifetime assume external
synchronization provided by global rtnl lock. Converting chain reference
counting to atomic reference counters is not possible because cls API uses
multiple counters and flags to control chain lifetime, so all of them must
be synchronized in chain get/put code.
Use single per-block lock to protect block data and manage lifetime of all
chains on the block. Always take block->lock when accessing chain_list.
Chain get and put modify chain lifetime-management data and parent block's
chain_list, so take the lock in these functions. Verify block->lock state
with assertions in functions that expect to be called with the lock taken
and are called from multiple places. Take block->lock when accessing
filter_chain_list.
In order to allow parallel update of rules on single block, move all calls
to classifiers outside of critical sections protected by new block->lock.
Rearrange chain get and put functions code to only access protected chain
data while holding block lock:
- Rearrange code to only access chain reference counter and chain action
reference counter while holding block lock.
- Extract code that requires block->lock from tcf_chain_destroy() into
standalone tcf_chain_destroy() function that is called by
__tcf_chain_put() in same critical section that changes chain reference
counters.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calculating rb->frames_per_block * req->tp_block_nr the result
can overflow. Check it for overflow without limiting the total buffer
size to UINT_MAX.
This change fixes support for packet ring buffers >= UINT_MAX.
Fixes: 8f8d28e4d6 ("net/packet: fix overflow in check for tp_frame_nr")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested
extensions has only 8 bits. Thus extensions starting from DCTCPINFO
cannot be requested directly. Some of them included into response
unconditionally or hook into some of lower 8 bits.
Extension INET_DIAG_CLASS_ID has not way to request from the beginning.
This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space
reservation, and documents behavior for other extensions.
Also this patch adds fallback to reporting socket priority. This filed
is more widely used for traffic classification because ipv4 sockets
automatically maps TOS to priority and default qdisc pfifo_fast knows
about that. But priority could be changed via setsockopt SO_PRIORITY so
INET_DIAG_TOS isn't enough for predicting class.
Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot
reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen).
So, after this patch INET_DIAG_CLASS_ID will report socket priority
for most common setup when net_cls isn't set and/or cgroup2 in use.
Fixes: 0888e372c3 ("net: inet: diag: expose sockets cgroup classid")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
genlmsg_reply can fail, so propagate its return code
Fixes: 915d7e5e59 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Addition of tls1.3 support broke tls1.2 handshake when async crypto
accelerator is used. This is because the record type for non-data
records is not propagated to user application. Also when async
decryption happens, the decryption does not stop when two different
types of records get dequeued and submitted for decryption. To address
it, we decrypt tls1.2 non-data records in synchronous way. We check
whether the record we just processed has same type as the previous one
before checking for async condition and jumping to dequeue next record.
Fixes: 130b392c6c ("net: tls: Add tls 1.3 support")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b639583f9e.
As per discussion with Jakub Kicinski and Michal Kubecek,
this will be better addressed by soon-too-come ethtool netlink
API with additional indication that given configuration request
is supposed to be persisted.
Also, remove the parameter support from bnxt_en driver.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Michal Kubecek <mkubecek@suse.cz>
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For robustness protect of higher port numbers than expected to avoid
setting bits behind our port_event_mask. In case of an DEVICE_FATAL
event all ports must be checked. The IB_EVENT_GID_CHANGE event is
provided in the global event handler, so handle it there. And handle a
QP_FATAL event instead of an DEVICE_FATAL event in the qp handler.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the shortcut that smc_lgr_free() would skip the check for
existing connections when the link group is not in the link group list.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_cdc_msg_recv_action() the received cdc message is evaluated.
To reduce the number of messaged triggered by this evaluation the logic
is streamlined. For the write_blocked condition we do not need to send
a response immediately. The remaining conditions can be put together
into one if clause.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When no free transfer buffers are available then a work to call
smc_tx_work() is scheduled. Set the schedule delay to zero, because for
the out-of-buffers condition the work can start immediately and will
block in the called function smc_wr_tx_get_free_slot(), waiting for free
buffers.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to smc_close_wake_tx_prepared() (which wakes up a possibly
waiting close processing that might wait for 'all data sent') to
smc_tx_sndbuf_nonempty() (which is the main function to send data).
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an updated rx_cursor_confirmed field was sent to the peer then
reset the cons_curs_upd_req flag. And remove the duplicate reset and
cursor update in smc_tx_consumer_update().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* aggregation session teardown with internal TXQs was
continuing to send some frames marked as aggregation,
fix from Ilan
* IBSS join was missed during firmware restart, should
such a thing happen
* speculative execution based on the return value of
cfg80211_classify8021d() - which is controlled by the
sender of the packet - could be problematic in some
code using it, prevent it
* a few peer measurement fixes
-----BEGIN PGP SIGNATURE-----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=NssM
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-02-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few fixes:
* aggregation session teardown with internal TXQs was
continuing to send some frames marked as aggregation,
fix from Ilan
* IBSS join was missed during firmware restart, should
such a thing happen
* speculative execution based on the return value of
cfg80211_classify8021d() - which is controlled by the
sender of the packet - could be problematic in some
code using it, prevent it
* a few peer measurement fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c9b47cc1fa ("xsk: fix bug when trying to use both copy and
zero-copy on one queue id") stores the umem into the netdev._rx
struct. However, the patch incorrectly removed the umem from the
netdev._rx struct when user-space passed "best-effort" mode
(i.e. select the fastest possible option available), and zero-copy
mode was not available. This commit fixes that.
Fixes: c9b47cc1fa ("xsk: fix bug when trying to use both copy and zero-copy on one queue id")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation,
but lacks proper Kconfig dependencies and does not explicitly
request defrag features.
As a result, if netfilter hooks are not loaded, when IPv6 fragmented
packet are handled by ipvs only the first fragment makes through.
Fix it properly declaring the dependency on Kconfig and registering
netfilter hooks on ip_vs_add_service() and ip_vs_new_dest().
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For bridge(br_flood) or broadcast/multicast packets, they could clone
skb with unconfirmed conntrack which break the rule that unconfirmed
skb->_nfct is never shared. With nfqueue running on my system, the race
can be easily reproduced with following warning calltrace:
[13257.707525] CPU: 0 PID: 12132 Comm: main Tainted: P W 4.4.60 #7744
[13257.707568] Hardware name: Qualcomm (Flattened Device Tree)
[13257.714700] [<c021f6dc>] (unwind_backtrace) from [<c021bce8>] (show_stack+0x10/0x14)
[13257.720253] [<c021bce8>] (show_stack) from [<c0449e10>] (dump_stack+0x94/0xa8)
[13257.728240] [<c0449e10>] (dump_stack) from [<c022a7e0>] (warn_slowpath_common+0x94/0xb0)
[13257.735268] [<c022a7e0>] (warn_slowpath_common) from [<c022a898>] (warn_slowpath_null+0x1c/0x24)
[13257.743519] [<c022a898>] (warn_slowpath_null) from [<c06ee450>] (__nf_conntrack_confirm+0xa8/0x618)
[13257.752284] [<c06ee450>] (__nf_conntrack_confirm) from [<c0772670>] (ipv4_confirm+0xb8/0xfc)
[13257.761049] [<c0772670>] (ipv4_confirm) from [<c06e7a60>] (nf_iterate+0x48/0xa8)
[13257.769725] [<c06e7a60>] (nf_iterate) from [<c06e7af0>] (nf_hook_slow+0x30/0xb0)
[13257.777108] [<c06e7af0>] (nf_hook_slow) from [<c07f20b4>] (br_nf_post_routing+0x274/0x31c)
[13257.784486] [<c07f20b4>] (br_nf_post_routing) from [<c06e7a60>] (nf_iterate+0x48/0xa8)
[13257.792556] [<c06e7a60>] (nf_iterate) from [<c06e7af0>] (nf_hook_slow+0x30/0xb0)
[13257.800458] [<c06e7af0>] (nf_hook_slow) from [<c07e5580>] (br_forward_finish+0x94/0xa4)
[13257.808010] [<c07e5580>] (br_forward_finish) from [<c07f22ac>] (br_nf_forward_finish+0x150/0x1ac)
[13257.815736] [<c07f22ac>] (br_nf_forward_finish) from [<c06e8df0>] (nf_reinject+0x108/0x170)
[13257.824762] [<c06e8df0>] (nf_reinject) from [<c06ea854>] (nfqnl_recv_verdict+0x3d8/0x420)
[13257.832924] [<c06ea854>] (nfqnl_recv_verdict) from [<c06e940c>] (nfnetlink_rcv_msg+0x158/0x248)
[13257.841256] [<c06e940c>] (nfnetlink_rcv_msg) from [<c06e5564>] (netlink_rcv_skb+0x54/0xb0)
[13257.849762] [<c06e5564>] (netlink_rcv_skb) from [<c06e4ec8>] (netlink_unicast+0x148/0x23c)
[13257.858093] [<c06e4ec8>] (netlink_unicast) from [<c06e5364>] (netlink_sendmsg+0x2ec/0x368)
[13257.866348] [<c06e5364>] (netlink_sendmsg) from [<c069fb8c>] (sock_sendmsg+0x34/0x44)
[13257.874590] [<c069fb8c>] (sock_sendmsg) from [<c06a03dc>] (___sys_sendmsg+0x1ec/0x200)
[13257.882489] [<c06a03dc>] (___sys_sendmsg) from [<c06a11c8>] (__sys_sendmsg+0x3c/0x64)
[13257.890300] [<c06a11c8>] (__sys_sendmsg) from [<c0209b40>] (ret_fast_syscall+0x0/0x34)
The original code just triggered the warning but do nothing. It will
caused the shared conntrack moves to the dying list and the packet be
droppped (nf_ct_resolve_clash returns NF_DROP for dying conntrack).
- Reproduce steps:
+----------------------------+
| br0(bridge) |
| |
+-+---------+---------+------+
| eth0| | eth1| | eth2|
| | | | | |
+--+--+ +--+--+ +---+-+
| | |
| | |
+--+-+ +-+--+ +--+-+
| PC1| | PC2| | PC3|
+----+ +----+ +----+
iptables -A FORWARD -m mark --mark 0x1000000/0x1000000 -j NFQUEUE --queue-num 100 --queue-bypass
ps: Our nfq userspace program will set mark on packets whose connection
has already been processed.
PC1 sends broadcast packets simulated by hping3:
hping3 --rand-source --udp 192.168.1.255 -i u100
- Broadcast racing flow chart is as follow:
br_handle_frame
BR_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, br_handle_frame_finish)
// skb->_nfct (unconfirmed conntrack) is constructed at PRE_ROUTING stage
br_handle_frame_finish
// check if this packet is broadcast
br_flood_forward
br_flood
list_for_each_entry_rcu(p, &br->port_list, list) // iterate through each port
maybe_deliver
deliver_clone
skb = skb_clone(skb)
__br_forward
BR_HOOK(NFPROTO_BRIDGE, NF_BR_FORWARD,...)
// queue in our nfq and received by our userspace program
// goto __nf_conntrack_confirm with process context on CPU 1
br_pass_frame_up
BR_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,...)
// goto __nf_conntrack_confirm with softirq context on CPU 0
Because conntrack confirm can happen at both INPUT and POSTROUTING
stage. So with NFQUEUE running, skb->_nfct with the same unconfirmed
conntrack could race on different core.
This patch fixes a repeating kernel splat, now it is only displayed
once.
Signed-off-by: Chieh-Min Wang <chiehminw@synology.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Attempting to avoid cloning the skb when broadcasting by inflating
the refcount with sock_hold/sock_put while under RCU lock is dangerous
and violates RCU principles. It leads to subtle race conditions when
attempting to free the SKB, as we may reference sockets that have
already been freed by the stack.
Unable to handle kernel paging request at virtual address 6b6b6b6b6b6c4b
[006b6b6b6b6b6c4b] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
task: fffffff78f65b380 task.stack: ffffff8049a88000
pc : sock_rfree+0x38/0x6c
lr : skb_release_head_state+0x6c/0xcc
Process repro (pid: 7117, stack limit = 0xffffff8049a88000)
Call trace:
sock_rfree+0x38/0x6c
skb_release_head_state+0x6c/0xcc
skb_release_all+0x1c/0x38
__kfree_skb+0x1c/0x30
kfree_skb+0xd0/0xf4
pfkey_broadcast+0x14c/0x18c
pfkey_sendmsg+0x1d8/0x408
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Kernel panic - not syncing: Fatal exception
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When a link endpoint is re-created (e.g. after a node reboot or
interface reset), the link session number is varied by random, the peer
endpoint will be synced with this new session number before the link is
re-established.
However, there is a shortcoming in this mechanism that can lead to the
link never re-established or faced with a failure then. It happens when
the peer endpoint is ready in ESTABLISHING state, the 'peer_session' as
well as the 'in_session' flag have been set, but suddenly this link
endpoint leaves. When it comes back with a random session number, there
are two situations possible:
1/ If the random session number is larger than (or equal to) the
previous one, the peer endpoint will be updated with this new session
upon receipt of a RESET_MSG from this endpoint, and the link can be re-
established as normal. Otherwise, all the RESET_MSGs from this endpoint
will be rejected by the peer. In turn, when this link endpoint receives
one ACTIVATE_MSG from the peer, it will move to ESTABLISHED and start
to send STATE_MSGs, but again these messages will be dropped by the
peer due to wrong session.
The peer link endpoint can still become ESTABLISHED after receiving a
traffic message from this endpoint (e.g. a BCAST_PROTOCOL or
NAME_DISTRIBUTOR), but since all the STATE_MSGs are invalid, the link
will be forced down sooner or later!
Even in case the random session number is larger than the previous one,
it can be that the ACTIVATE_MSG from the peer arrives first, and this
link endpoint moves quickly to ESTABLISHED without sending out any
RESET_MSG yet. Consequently, the peer link will not be updated with the
new session number, and the same link failure scenario as above will
happen.
2/ Another situation can be that, the peer link endpoint was reset due
to any reasons in the meantime, its link state was set to RESET from
ESTABLISHING but still in session, i.e. the 'in_session' flag is not
reset...
Now, if the random session number from this endpoint is less than the
previous one, all the RESET_MSGs from this endpoint will be rejected by
the peer. In the other direction, when this link endpoint receives a
RESET_MSG from the peer, it moves to ESTABLISHING and starts to send
ACTIVATE_MSGs, but all these messages will be rejected by the peer too.
As a result, the link cannot be re-established but gets stuck with this
link endpoint in state ESTABLISHING and the peer in RESET!
Solution:
===========
This link endpoint should not go directly to ESTABLISHED when getting
ACTIVATE_MSG from the peer which may belong to the old session if the
link was re-created. To ensure the session to be correct before the
link is re-established, the peer endpoint in ESTABLISHING state will
send back the last session number in ACTIVATE_MSG for a verification at
this endpoint. Then, if needed, a new and more appropriate session
number will be regenerated to force a re-synch first.
In addition, when a link in ESTABLISHING state is reset, its state will
move to RESET according to the link FSM, along with resetting the
'in_session' flag (and the other data) as a normal link reset, it will
also be deleted if requested.
The solution is backward compatible.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Number of devlink attributes has grown over 128, causing the
following warning:
../net/core/devlink.c: In function ‘devlink_nl_cmd_region_read_dumpit’:
../net/core/devlink.c:3740:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
Since the number of attributes is only going to grow allocate
the array dynamically.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need the port to be both ethernet and have the rigth netdev,
not one or the other.
Fixes: ddb6e99e2d ("ethtool: add compat for devlink info")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow those steps:
# ip addr add 2001:123::1/32 dev eth0
# ip addr add 2001:123:456::2/64 dev eth0
# ip addr del 2001:123::1/32 dev eth0
# ip addr del 2001:123:456::2/64 dev eth0
and then prefix route of 2001:123::1/32 will still exist.
This is because ipv6_prefix_equal in check_cleanup_prefix_route
func does not check whether two IPv6 addresses have the same
prefix length. If the prefix of one address starts with another
shorter address prefix, even though their prefix lengths are
different, the return value of ipv6_prefix_equal is true.
Here I add a check of whether two addresses have the same prefix
to decide whether their prefixes are equal.
Fixes: 5b84efecb7 ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we free skb at tipc_data_input, we return a 'false' boolean.
Then, skb passed to subcalling tipc_link_input in tipc_link_rcv,
<snip>
1303 int tipc_link_rcv:
...
1354 if (!tipc_data_input(l, skb, l->inputq))
1355 rc |= tipc_link_input(l, skb, l->inputq);
</snip>
Fix it by simple changing to a 'true' boolean when skb is being free-ed.
Then, tipc_link_rcv will bypassed to subcalling tipc_link_input as above
condition.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <maloy@donjonn.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
size = sizeof(struct foo) + count * sizeof(void *);
instance = alloc(size, GFP_KERNEL)
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
size = struct_size(instance, entry, count);
instance = alloc(size, GFP_KERNEL)
Notice that, in this case, variable sz is not necessary, hence it is
removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = alloc(size, GFP_KERNEL)
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
size = struct_size(instance, entry, count);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A statement in an if block is not indented correctly. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add WARN_ON to make sure that all sub objects of a devlink device are
cleanedup before freeing the devlink device.
This helps to catch any driver bugs.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The flag offload_fwd_mark is set as the switch can forward frames by
itself.
This can be considered a fix to a problem introduced in commit
c2e866911e where the port membership are not set in sync. The flag
offload_fwd_mark just needs to be set in tag_ksz.c to prevent the software
bridge from forwarding duplicate multicast frames.
Fixes: c2e866911e ("microchip: break KSZ9477 DSA driver into two files")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netlink has moved from bitmasks to group numbers long ago.
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Holding mmap_sem exclusively for a gup() is an overkill. Lets
share the lock and replace the gup call for gup_longterm(), as
it is better suited for the lifetime of the pinning.
Fixes: c0c77d8fb7 ("xsk: add user memory registration support sockopt")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Bjorn Topel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
CC: netdev@vger.kernel.org
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sander Eikelenboom bisected a NAT related regression down
to the l4proto->manip_pkt indirection removal.
I forgot that ICMP(v6) errors (e.g. PKTTOOBIG) can be set as related
to the existing conntrack entry.
Therefore, when passing the skb to nf_nat_ipv4/6_manip_pkt(), that
ended up calling the wrong l4 manip function, as tuple->dst.protonum
is the original flows l4 protocol (TCP, UDP, etc).
Set the dst protocol field to ICMP(v6), we already have a private copy
of the tuple due to the inversion of src/dst.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Fixes: faec18dbb0 ("netfilter: nat: remove l4proto->manip_pkt")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The generic ASN.1 decoder infrastructure doesn't guarantee that callbacks
will get as much data as they expect; callbacks have to check the `datalen`
parameter before looking at `data`. Make sure that snmp_version() and
snmp_helper() don't read/write beyond the end of the packet data.
(Also move the assignment to `pdata` down below the check to make it clear
that it isn't necessarily a pointer we can use before the `datalen` check.)
Fixes: cc2d58634e ("netfilter: nf_nat_snmp_basic: use asn1 decoder library")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Enforce the first argument to be a correct type of a pointer to struct
element and avoid unnecessary typecasts from const to non-const pointers
(the change in validate_ie_attr() is needed to make this part work). In
addition, avoid signed/unsigned comparison within for_each_element() and
mark struct element packed just in case.
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When mac80211 requests the low level driver to stop an ongoing
Tx aggregation, the low level driver is expected to call
ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready
to stop the session. The callback in turn schedules a worker
to complete the session tear down, which in turn also handles
the relevant state for the intermediate Tx queue.
However, as this flow in asynchronous, the intermediate queue
should be stopped and not continue servicing frames, as in
such a case frames that are dequeued would be marked as part
of an aggregation, although the aggregation is already been
stopped.
Fix this by stopping the intermediate Tx queue, before
calling the low level driver to stop the Tx aggregation.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It's possible that the caller of cfg80211_classify8021d() uses the
value to index an array, like mac80211 in ieee80211_downgrade_queue().
Prevent speculation on the return value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Without recording the netlink port ID, we cannot return the
results or complete messages to userspace, nor will we be
able to abort if the socket is closed, so clearly we need
to fill the value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix FTM per burst maximum value from 15 to 31
(The maximal bits that represents that number in the frame
is 5 hence a maximal value of 31)
Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a driver does any significant activity in its ibss_join method,
then it will very well expect that to be called during restart,
before any stations are added. Do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jouni reports that in some cases it is possible that getting
disconnected (or stopping AP, after previous patches) results
in further operations hitting the window within the regulatory
core restoring the regdomain to the defaults. The reason for
this is that we have to call out to CRDA or otherwise do some
asynchronous work, and thus can't do the restore atomically.
However, we've previously seen all the data we need to do the
restore, so we can hang on to that data and use it later for
the restore. This makes the whole thing happen within a single
locked section and thus atomic.
However, we can't *always* do this - there are unfortunately
cases where the restore needs to re-request, because this is
also used (abused?) as an error recovery process, so make the
new behaviour optional and only use it when doing a regular
restore as described above.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the setup code in AF_XDP is protected by a mutex with the
exception of the mmap code that cannot use it. To make sure that a
process banging on the mmap call at the same time as another process
is setting up the socket, smp_wmb() calls were added in the umem
registration code and the queue creation code, so that the published
structures that xsk_mmap needs would be consistent. However, the
corresponding smp_rmb() calls were not added to the xsk_mmap
code. This patch adds these calls.
Fixes: 37b076933a ("xsk: add missing write- and data-dependency barrier")
Fixes: c0c77d8fb7 ("xsk: add user memory registration support sockopt")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_skb_change_proto and bpf_skb_adjust_room change skb header length.
For GSO packets they adjust gso_size to maintain the same MTU.
The gso size can only be safely adjusted on bytestream protocols.
Commit d02f51cbcf ("bpf: fix bpf_skb_adjust_net/bpf_skb_proto_xlat
to deal with gso sctp skbs") excluded SKB_GSO_SCTP.
Since then type SKB_GSO_UDP_L4 has been added, whose contents are one
gso_size unit per datagram. Also exclude these.
Move from a blacklist to a whitelist check to future proof against
additional such new GSO types, e.g., for fraglist based GRO.
Fixes: bec1f6f697 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a helper function BPF_FUNC_tcp_sock and it
is currently available for cg_skb and sched_(cls|act):
struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk);
int cg_skb_foo(struct __sk_buff *skb) {
struct bpf_tcp_sock *tp;
struct bpf_sock *sk;
__u32 snd_cwnd;
sk = skb->sk;
if (!sk)
return 1;
tp = bpf_tcp_sock(sk);
if (!tp)
return 1;
snd_cwnd = tp->snd_cwnd;
/* ... */
return 1;
}
A 'struct bpf_tcp_sock' is also added to the uapi bpf.h to provide
read-only access. bpf_tcp_sock has all the existing tcp_sock's fields
that has already been exposed by the bpf_sock_ops.
i.e. no new tcp_sock's fields are exposed in bpf.h.
This helper returns a pointer to the tcp_sock. If it is not a tcp_sock
or it cannot be traced back to a tcp_sock by sk_to_full_sk(), it
returns NULL. Hence, the caller needs to check for NULL before
accessing it.
The current use case is to expose members from tcp_sock
to allow a cg_skb_bpf_prog to provide per cgroup traffic
policing/shaping.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next patch will introduce a new "struct bpf_tcp_sock" which
exposes the same tcp_sock's fields already exposed in
"struct bpf_sock_ops".
This patch refactor the existing convert_ctx_access() codes for
"struct bpf_sock_ops" to get them ready to be reused for
"struct bpf_tcp_sock". The "rtt_min" is not refactored
in this patch because its handling is different from other
fields.
The SOCK_OPS_GET_TCP_SOCK_FIELD is new. All other SOCK_OPS_XXX_FIELD
changes are code move only.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds "state", "dst_ip4", "dst_ip6" and "dst_port" to the
bpf_sock. The userspace has already been using "state",
e.g. inet_diag (ss -t) and getsockopt(TCP_INFO).
This patch also allows narrow load on the following existing fields:
"family", "type", "protocol" and "src_port". Unlike IP address,
the load offset is resticted to the first byte for them but it
can be relaxed later if there is a use case.
This patch also folds __sock_filter_check_size() into
bpf_sock_is_valid_access() since it is not called
by any where else. All bpf_sock checking is in
one place.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In kernel, it is common to check "skb->sk && sk_fullsock(skb->sk)"
before accessing the fields in sock. For example, in __netdev_pick_tx:
static u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb,
struct net_device *sb_dev)
{
/* ... */
struct sock *sk = skb->sk;
if (queue_index != new_index && sk &&
sk_fullsock(sk) &&
rcu_access_pointer(sk->sk_dst_cache))
sk_tx_queue_set(sk, new_index);
/* ... */
return queue_index;
}
This patch adds a "struct bpf_sock *sk" pointer to the "struct __sk_buff"
where a few of the convert_ctx_access() in filter.c has already been
accessing the skb->sk sock_common's fields,
e.g. sock_ops_convert_ctx_access().
"__sk_buff->sk" is a PTR_TO_SOCK_COMMON_OR_NULL in the verifier.
Some of the fileds in "bpf_sock" will not be directly
accessible through the "__sk_buff->sk" pointer. It is limited
by the new "bpf_sock_common_is_valid_access()".
e.g. The existing "type", "protocol", "mark" and "priority" in bpf_sock
are not allowed.
The newly added "struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk)"
can be used to get a sk with all accessible fields in "bpf_sock".
This helper is added to both cg_skb and sched_(cls|act).
int cg_skb_foo(struct __sk_buff *skb) {
struct bpf_sock *sk;
sk = skb->sk;
if (!sk)
return 1;
sk = bpf_sk_fullsock(sk);
if (!sk)
return 1;
if (sk->family != AF_INET6 || sk->protocol != IPPROTO_TCP)
return 1;
/* some_traffic_shaping(); */
return 1;
}
(1) The sk is read only
(2) There is no new "struct bpf_sock_common" introduced.
(3) Future kernel sock's members could be added to bpf_sock only
instead of repeatedly adding at multiple places like currently
in bpf_sock_ops_md, bpf_sock_addr_md, sk_reuseport_md...etc.
(4) After "sk = skb->sk", the reg holding sk is in type
PTR_TO_SOCK_COMMON_OR_NULL.
(5) After bpf_sk_fullsock(), the return type will be in type
PTR_TO_SOCKET_OR_NULL which is the same as the return type of
bpf_sk_lookup_xxx().
However, bpf_sk_fullsock() does not take refcnt. The
acquire_reference_state() is only depending on the return type now.
To avoid it, a new is_acquire_function() is checked before calling
acquire_reference_state().
(6) The WARN_ON in "release_reference_state()" is no longer an
internal verifier bug.
When reg->id is not found in state->refs[], it means the
bpf_prog does something wrong like
"bpf_sk_release(bpf_sk_fullsock(skb->sk))" where reference has
never been acquired by calling "bpf_sk_fullsock(skb->sk)".
A -EINVAL and a verbose are done instead of WARN_ON. A test is
added to the test_verifier in a later patch.
Since the WARN_ON in "release_reference_state()" is no longer
needed, "__release_reference_state()" is folded into
"release_reference_state()" also.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This series finally gets us to the point of having system calls with
64-bit time_t on all architectures, after a long time of incremental
preparation patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures
using the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call
that includes a 'struct timespec' argument, or a structure containing
a timespec or (in case of clock_adjtime) timeval. Not included here
are new versions of getitimer/setitimer and getrusage/waitid, which
are planned for the future but only needed to make a consistent API
rather than for correct operation beyond y2038. These four system
calls are based on 'timeval', and it has not been finally decided
what the replacement kernel interface will use instead.
So far, I have done a lot of build testing across most architectures,
which has found a number of bugs. Runtime testing so far included
testing LTP on 32-bit ARM with the existing system calls, to ensure
we do not regress for existing binaries, and a test with a 32-bit
x86 build of LTP against a modified version of the musl C library
that has been adapted to the new system call interface [3].
This library can be used for testing on all architectures supported
by musl-1.1.21, but it is not how the support is getting integrated
into the official musl release. Official musl support is planned
but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IZVb
-----END PGP SIGNATURE-----
Merge tag 'y2038-new-syscalls' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull y2038 - time64 system calls from Arnd Bergmann:
This series finally gets us to the point of having system calls with 64-bit
time_t on all architectures, after a long time of incremental preparation
patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures using
the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call that
includes a 'struct timespec' argument, or a structure containing a timespec
or (in case of clock_adjtime) timeval. Not included here are new versions
of getitimer/setitimer and getrusage/waitid, which are planned for the
future but only needed to make a consistent API rather than for correct
operation beyond y2038. These four system calls are based on 'timeval', and
it has not been finally decided what the replacement kernel interface will
use instead.
So far, I have done a lot of build testing across most architectures, which
has found a number of bugs. Runtime testing so far included testing LTP on
32-bit ARM with the existing system calls, to ensure we do not regress for
existing binaries, and a test with a 32-bit x86 build of LTP against a
modified version of the musl C library that has been adapted to the new
system call interface [3]. This library can be used for testing on all
architectures supported by musl-1.1.21, but it is not how the support is
getting integrated into the official musl release. Official musl support is
planned but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
Modify the kernel users of the TCA_ACT_* macros to use TCA_ID_*. For
example, use TCA_ID_GACT instead of TCA_ACT_GACT. This will align with
TCA_ID_POLICE and also differentiates these identifier, used in struct
tc_action_ops type field, from other macros starting with TCA_ACT_.
To make things clearer, we name the enum defining the TCA_ID_*
identifiers and also change the "type" field of struct tc_action to
id.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move all the TC identifiers to one place, to the same enum that defines
the identifier of police action. This makes it easier choose numbers for
new actions since they are now defined in one place. We preserve the
original values for binary compatibility. New IDs should be added inside
the enum.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalash Nainwal