In the case where we mount a filesystem which was previously using the
attr2 format as attr1, returning the default mp->m_attroffset instead of
the per-inode di_forkoff for inline attribute fit calculations, may result
in corruption, if for example, the data fork is already taking more space
than the default fork offset and we try to add an extended attribute. Fix
tested by xfstests/186.
SGI-PV: 979606
SGI-Modid: xfs-linux-melb:xfs-kern:30861a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On success, we still need to join the inode to the current transaction in
xfs_itruncate_finish(). Fixes regression from error handling changes.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30845a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfssyncd triggers the logging of superblock counters every 30s if the
filesystem is made with lazy-count=1. This will prevent disks from idling
and spinning down as there will be a log write every 30s. With the way
counter recovery works for lazy-count=1, this code is unnecessary and
provides no real benefit, so just remove it.
SGI-PV: 980145
SGI-Modid: xfs-linux-melb:xfs-kern:30840a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Fix a logic error in xfs_alloc_ag_vextent_near(). This is a regression
introduced by the error handling changes.
SGI-PV: 890084
SGI-Modid: xfs-linux-melb:xfs-kern:30838a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfsbdstrat() made all I/Os error out, good or bad. Fix it.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30836a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Unmounting the log can fail. unlikely, but it can. Catch all the error
conditions an make sure it's propagated upwards.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30833a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_log_force() is declared to return an error, but we almost never check
it. We don't need to check it in most cases; if there's a log I/O error
then we'll be shutting down the filesystem anyway and that means we'll
catch the error somewhere else.
However, on certain calls we should be returning an error - sync
transactions, fsync, sync writes, etc. so this isn't a pure black and
white distinction. Hence make xfs_log_force() a void function that issues
a warning to the syslog on error, and call _xfs_log_force() in all the
places where we actually care about the error status returned.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30832a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_buf_associate_memory() can fail, but the return is never checked.
Propagate the error through XFS_BUF_SET_PTR() so that failures are
detected.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30831a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_inactive() fails to report errors when committing the inactive
transaction. Hence we can get silent failures either finishing off the
truncation or committing the transaction. Even if we get errors, we need
to continue, so simply warn loudly to the system if we get errors here.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30830a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Catch errors from xfs_imap() in log recovery when we might be trying to
map an invalid inode number due to a corrupted log.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30829a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_iflush_fork() never returns an error. Mark it void and clean up the
code calling it that checks for errors.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30827a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On unwritten I/O completion, we fail to propagate an error when converting
the extent to a written extent. This means that the I/O silently fails.
propagate the error onto the ioend so that the inode is marked with an
error appropriately.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30826a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_bdwrite() cannot return an error; it only queues buffers to the
delayed write list and as such never encounters anything that can fail.
Mark it void.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30825a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_bawrite() can return immediate error status on async writes. Unlike
xfsbdstrat() we don't ever check the error on the buffer after the call,
so we currently do not catch errors at all here. Ensure we catch and
propagate or warn to the syslog about up-front async write errors.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30824a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfsbdstrat() is declared to return an error. That is never checked because
the error is propagated by the xfs_buf_t that is passed through the
function.
Mark xfsbdstrat() as returning void and comment the prototype on the
methods needed for error checking.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30823a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_bmap_last_offset() can fail and return an error.
xfs_iomap_write_allocate() fails to detect and propagate the error.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30802a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_free_extent() can fail, but log recovery never bothers to check if it
successfully free the extent it was supposed to. This could lead to silent
corruption during log recovery. Abort log recovery if we fail to free an
extent.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30801a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
block_truncate_page() can return errors that we currently ignore and
silently discard. We should not ever get errors reported here - an error
indicates a bug somewhere else. Hence catch the error and issue a stack
dump to the syslog because we cannot propagate the error any further up
the call chain.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30800a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_alloc_compute_aligned() returns a value based on a comparison of the
computed extent length and the minimum length allowed. This is only used
by some callers - the other four return parameters are used more often.
Hence move the comparison to the code that actually needs to do it and
make xfs_alloc_compute_aligned() a void function.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30797a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_alloc_search_busy() returns an index into the busy array if the extent
was found in the array. This is never checked, and the
xfs_alloc_search_busy() does a log force to prevent reuse of the extent
before the free transaction hits the disk. Hence the return value is
useless. Declare the function void and remove the slot number from the
tracing as well.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30796a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_trans_reserve() reports errors that should not be ignored. For
example, a shutdown filesystem will report errors through
xfs_trans_reserve() to prevent further changes from being attempted on a
damaged filesystem. Catch and propagate all error conditions from
xfs_trans_reserve().
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30794a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Removing an ACL can return an error. Propagate it.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30793a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Propagate the error status from xfs_acl_setmode() so that callers know if
the ACl was set correctly or not.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30792a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Truncating the quota files can silently fail. Ensure that truncation
errors are propagated to the callers.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30791a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When turning off quota, we need to write various transactions to the log
to ensure that they are cleanly removed in the case of a crash. We need to
check that the transactions hit the disk correctly. If we fail to write
the final quota off transaction, we are corrupt in memory and so the only
option is to shut the filesystem down at this point.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30790a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Warn to the syslog if we fail to reset the quota flags in the superblock
when a quota check fails.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30789a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail
to mount quotas, we continue with quota's turned off, which is all handled
inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need
not be returned to the callers.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30788a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence
we never know if we've failed to flush a dquot to disk. Propagate the
error and warn to the syslog if a flush ever fails.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30787a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated
into the quotacheck code to determine if the quotacheck succeeded or not.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30786a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_reserve_blocks() can fail in interesting ways. In neither case is it a
fatal error, but the result can lead to sub-optimal behaviour. Warn to the
syslog if the call fails but otherwise continue.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30784a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Makes it simpler to annotate function prototypes with __must_check via sed
scripts.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30781a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This target component validation is not POSIX conformant and it is not
done by any other Linux filesystem so remove it from XFS.
SGI-PV: 980080
SGI-Modid: xfs-linux-melb:xfs-kern:30776a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the remaining uses of __inline in the XFS code base.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30774a
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Recent changes to xlog_state_release_iclog() placed the grant_lock inside
the icloglock. forced unmount of the log does this the opposite way
around, but does not depend on the order for correct working. Fix the
inversion by changing the order locks are gained in
xfs_log_force_umount().
SGI-PV: 979661
SGI-Modid: xfs-linux-melb:xfs-kern:30773a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
To reduce contention on the log in large CPU count, separate out different
parts of the xlog_t structure onto different cachelines. Move each lock
onto a different cacheline along with all the members that are
accessed/modified while that lock is held.
Also, move the debugging code into debug code.
SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30772a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The ticket allocator is just a simple slab implementation internal to the
log. It requires the icloglock to be held when manipulating it and this
contributes to contention on that lock.
Just kill the entire allocator and use a memory zone instead. While there,
allow us to gracefully fail allocation with ENOMEM.
SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30771a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Rather than use the icloglock for protecting the iclog completion callback
chain, use a new per-iclog lock so that walking the callback chain doesn't
require holding a global lock.
This reduces contention on the icloglock during transaction commit and log
I/O completion by reducing the number of times we need to hold the global
icloglock during these operations.
SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30770a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
While investigating the extent corruption bug I ran into this bug in debug
only code. xfs_bmap_check_leaf_extents() loops through the leaf blocks of
the extent btree checking that every extent is entirely before the next
extent. It also compares the last extent in the previous block to the
first extent in the current block when the previous block has been
released and potentially unmapped. So take a copy of the last extent
instead of a pointer. Also move the last extent check out of the loop
because we only need to do it once.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30718a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Most VN_RELE calls either directly contain a XFS_ITOV or have the
corresponding xfs_inode already in scope. Use the IRELE helper instead of
VN_RELE to clarify the code. With a little more work we can kill VN_RELE
altogether and define IRELE in terms of iput directly.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30710a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The three subcases of xfs_ioc_xattr don't share any semantics and almost
no code, so split it into three separate helpers.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30709a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- rename rootvp to root for clarify
- remove useless vn_to_inode call
- check is_bad_inode before calling d_alloc_root
- use iput instead of VN_RELE in the error case
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30708a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When writing into preallocated regions there is a case where XFS can oops
or hang doing the unwritten extent conversion on I/O completion. It turns
out that the problem is related to the btree cursor being invalid.
When we do an insert into the tree, we may need to split blocks in the
tree. When we only split at the leaf level (i.e. level 0), everything
works just fine. However, if we have a multi-level split in the btreee,
the cursor passed to the insert function is no longer valid once the
insert is complete.
The leaf level split is handled correctly because all the operations at
level 0 are done using the original cursor, hence it is updated correctly.
However, when we need to update the next level up the tree, we don't use
that cursor - we use a cloned cursor that points to the index in the next
level up where we need to do the insert.
Hence if we need to split a second level, the changes to the tree are
reflected in the cloned cursor and not the original cursor. This
clone-and-move-up-a-level-on-split behaviour recurses all the way to the
top of the tree.
The complexity here is that these cloned cursors do not point to the
original index that was inserted - they point to the newly allocated block
(the right block) and the original cursor pointer to that level may still
point to the left block. Hence, without deep examination of the cloned
cursor and buffers, we cannot update the original cursor with the new path
from the cloned cursor.
In these cases the original cursor could be pointing to the wrong block(s)
and hence a subsequent modification to the tree using that cursor will
lead to corruption of the tree.
The crash case occurs when the tree changes height - we insert a new level
in the tree, and the cursor does not have a buffer in it's path for that
level. Hence any attempt to walk back up the cursor to the root block will
result in a null pointer dereference.
To make matters even more complex, the BMAP BT is rooted in an inode, so
we can have a change of height in the btree *without a root split*. That
is, if the root block in the inode is full when we split a leaf node, we
cannot fit the pointer to the new block in the root, so we allocate a new
block, migrate all the ptrs out of the inode into the new block and point
the inode root block at the newly allocated block. This changes the height
of the tree without a root split having occurred and hence invalidates the
path in the original cursor.
The patch below prevents xfs_bmbt_insert() from returning with an invalid
cursor by detecting the cases that invalidate the original cursor and
refresh it by do a lookup into the btree for the original index we were
inserting at.
Note that the INOBT, AGFBNO and AGFCNT btree implementations also have
this bug, but the cursor is currently always destroyed or revalidated
after an insert for those trees. Hence this patch only address the problem
in the BMBT code.
SGI-PV: 979339
SGI-Modid: xfs-linux-melb:xfs-kern:30701a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty
transaction in xfs_mkdir or xfs_create. This is due to the initial
allocation attempt not taking into account inode alignment and hence we
can prepare the AGF freelist for allocation when it's not actually
possible to do an allocation. This results in inode allocation returning
ENOSPC with a dirty transaction, and hence we shut down the filesystem.
Because the first allocation is an exact allocation attempt, we must tell
the allocator that the alignment does not affect the allocation attempt.
i.e. we will accept any extent alignment as long as the extent starts at
the block we want. Unfortunately, this means that if the longest free
extent is less than the length + alignment necessary for fallback
allocation attempts but is long enough to attempt a non-aligned
allocation, we will modify the free list.
If we then have the exact allocation fail, all other allocation attempts
will also fail due to the alignment constraint being taken into account.
Hence the initial attempt needs to set the "alignment slop" field so that
alignment, while not required, must be taken into account when determining
if there is enough space left in the AG to do the allocation.
That means if the exact allocation fails, we will not dirty the freelist
if there is not enough space available fo a subsequent allocation to
succeed. Hence we get an ENOSPC error back to userspace without shutting
down the filesystem.
SGI-PV: 978886
SGI-Modid: xfs-linux-melb:xfs-kern:30699a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the xfs_ail_entry_t with a struct list_head and clean the
surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail()
by terminating the loop at the head of the list correctly.
SGI-PV: 978682
SGI-Modid: xfs-linux-melb:xfs-kern:30636a
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines
above unconditionally, so there is no need to try to read the superblock
if it's not present. If any other port doesn't have the superblock read at
this point it should just call it directly from it's xfs_mount equivalent.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30603a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's completely unused so we might aswell kill it. Note that there is
another t_sema in struct xlog_ticket, which is used and actually an sv_t
despite the name. That one is left untouched by this patch.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30591a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that the ktrace_enter() code is using atomics, the non-power-of-2
buffer sizes - which require modulus operations to get the index - are
showing up as using substantial CPU in the profiles.
Force the buffer sizes to be rounded up to the nearest power of two and
use masking rather than modulus operations to convert the index counter to
the buffer index. This reduces ktrace_enter overhead to 8% of a CPU time,
and again almost halves the trace intensive test runtime.
SGI-PV: 977546
SGI-Modid: xfs-linux-melb:xfs-kern:30538a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
ktrace_enter() is consuming vast amounts of CPU time due to the use of a
single global lock for protecting buffer index increments. Change it to
use per-buffer atomic counters - this reduces ktrace_enter() overhead
during a trace intensive test on a 4p machine from 58% of all CPU time to
12% and halves test runtime.
SGI-PV: 977546
SGI-Modid: xfs-linux-melb:xfs-kern:30537a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS changes the c/mtime of an inode when truncating it to the same size.
The c/mtime is only supposed to change if the size is changed. Not to be
confused with ftruncate, where the c/mtime is supposed to be changed even
if the size is not changed.
The Linux VFS encodes this semantic difference in the flags it sends down
to ->setattr, which XFS currently ignores. We need to make XFS pay
attention to the VFS flags and hence Do The Right Thing.
SGI-PV: 977547
SGI-Modid: xfs-linux-melb:xfs-kern:30536a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
As Dave pointed out after the export ops changes we now always encode the
parent into the filehandle for regular files, but it's not actually needed
when the filesystem is export with no_subtree_check. This one-liner fixes
xfs_fs_encode_fh to skip encoding the parent unless nessecary.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30535a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We can just use xfs_ilock/xfs_iunlock instead and get rid of the ugly
bhv_vrwlock_t.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30533a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Instead of of xfs_get_dir_entry use a macro to get the xfs_inode from the
dentry in the callers and grab the reference manually.
Only grab the reference once as it's fine to keep it over the dmapi calls.
(And even that reference is actually superflous in Linux but I'll leave
that for another patch)
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30531a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Cleanup the unneeded intermediate vnode step in the flushing helpers and
go directly from the xfs_inode to the struct address_space.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30530a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- use proper goto based unwinding instead of the current mess of
multiple conditionals
- rename ip to inode because that's the normal convention for Linux
inodes while ip is the convention for xfs_inodes
- remove unlikely checks for the default_acl - branches marked unlikely
might lead to extreme branch bredictor slowdons if taken and for some
workloads a default acl is quite common
- properly indent the switch statements
- remove xfs_has_fs_struct as nfsd has a fs_struct in any semi-recent
kernel
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30529a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that we update the log tail LSN less frequently on transaction
completion, we pass the contention straight to the global log state lock
(l_iclog_lock) during transaction completion.
We currently have to take this lock to decrement the iclog reference
count. there is a reference count on each iclog, so we need to take he
global lock for all refcount changes.
When large numbers of processes are all doing small trnasctions, the iclog
reference counts will be quite high, and the state change that absolutely
requires the l_iclog_lock is the except rather than the norm.
Change the reference counting on the iclogs to use atomic_inc/dec so that
we can use atomic_dec_and_lock during transaction completion and avoid the
need for grabbing the l_iclog_lock for every reference count decrement
except the one that matters - the last.
SGI-PV: 975671
SGI-Modid: xfs-linux-melb:xfs-kern:30505a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When hundreds of processors attempt to commit transactions at the same
time, they can contend on the AIL lock when updating the tail LSN held in
the in-core log structure.
At the moment, the tail LSN is only needed when actually writing out an
iclog, so it really does not need to be updated on every single
transaction completion - only those that result in switching iclogs and
flushing them to disk.
The result is that we reduce the number of times we need to grab the AIL
lock and the log grant lock by up to two orders of magnitude on large
processor count machines. The problem has previously been hidden by AIL
lock contention walking the AIL list which was recently solved and
uncovered this issue.
SGI-PV: 975671
SGI-Modid: xfs-linux-melb:xfs-kern:30504a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove open coded checks for the whether the inode is clean and replace
them with an inlined function.
SGI-PV: 977461
SGI-Modid: xfs-linux-melb:xfs-kern:30503a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_icluster structure and replace with a radix tree lookup.
We don't need to keep a list of inodes in each cluster around anymore as
we can look them up quickly when we need to. The only time we need to do
this now is during inode writeback.
Factor the inode cluster writeback code out of xfs_iflush and convert it
to use radix_tree_gang_lookup() instead of walking a list of inodes built
when we first read in the inodes.
This remove 3 pointers from each xfs_inode structure and the xfs_icluster
structure per inode cluster. Hence we reduce the cache footprint of the
xfs_inodes by between 5-10% depending on cluster sparseness.
To be truly efficient we need a radix_tree_gang_lookup_range() call to
stop searching once we are past the end of the cluster instead of trying
to find a full cluster's worth of inodes.
Before (ia64):
$ cat /sys/slab/xfs_inode/object_size 536
After:
$ cat /sys/slab/xfs_inode/object_size 512
SGI-PV: 977460
SGI-Modid: xfs-linux-melb:xfs-kern:30502a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When pdflush is writing back inodes, it can get stuck on inode cluster
buffers that are currently under I/O. This occurs when we write data to
multiple inodes in the same inode cluster at the same time.
Effectively, delayed allocation marks the inode dirty during the data
writeback. Hence if the inode cluster was flushed during the writeback of
the first inode, the writeback of the second inode will block waiting for
the inode cluster write to complete before writing it again for the newly
dirtied inode.
Basically, we want to avoid this from happening so we don't block pdflush
and slow down all of writeback. Hence we introduce a non-blocking async
inode flush flag that pdflush uses. If this flag is set, we use
non-blocking operations (e.g. try locks) whereever we can to avoid
blocking or extra I/O being issued.
SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30501a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The only difference between the functions is one passes an inode for the
lookup, the other passes an inode number. However, they don't do the same
validity checking or set all the same state on the buffer that is returned
yet they should.
Factor the functions into a common implementation.
SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30500a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_refcache, it was only needed while we were still
building for 2.4 kernels.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30472a
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On a forced shutdown, xfs_finish_reclaim() will skip flushing the inode.
If the inode flush lock is not already held and there is an outstanding
xfs_iflush_done() then we might free the inode prematurely. By acquiring
and releasing the flush lock we will synchronise with xfs_iflush_done().
SGI-PV: 909874
SGI-Modid: xfs-linux-melb:xfs-kern:30468a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Since older kernels may look in the sb_bad_features2 slot for flags,
rather than zeroing it out on fixup, we should make it equal to the
sb_features2 value.
Also, if the ATTR2 flag was not found prior to features2 fixup, it was not
set in the mount flags, so re-check after the fixup so that the current
session will use the feature.
Also fix up the comments to reflect these changes.
SGI-PV: 980085
SGI-Modid: xfs-linux-melb:xfs-kern:30778a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of
the on-disk superblock can vary in location This causes problems when the
filesystem gets moved to a different platform, or there is a 32 bit
userspace and 64 bit kernel.
This patch detects the defect at mount time, logs a warning such as:
XFS: correcting sb_features alignment problem
in dmesg and corrects the problem so that everything is OK. it also
blacklists the bad field in the superblock so it does not get used for
something else later on.
SGI-PV: 977636
SGI-Modid: xfs-linux-melb:xfs-kern:30539a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove macro-to-small-function indirection from xfs_sb.h, and remove some
which are completely unused.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30528a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If the radix_tree_preload() fails, we need to destroy the inode we just
read in before trying again. This could leak xfs_vnode structures when
there is memory pressure. Noticed by Christoph Hellwig.
SGI-PV: 977823
SGI-Modid: xfs-linux-melb:xfs-kern:30606a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
wakeups
Idle state is not being detected properly by the xfsaild push code. The
current idle state is detected by an empty list which may never happen
with mostly idle filesystem or one using lazy superblock counters. A
single dirty item in the list that exists beyond the push target can
result repeated looping attempting to push up to the target because it
fails to check if the push target has been acheived or not.
Fix by considering a dirty list with everything past the target as an idle
state and set the timeout appropriately.
SGI-PV: 977545
SGI-Modid: xfs-linux-melb:xfs-kern:30532a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
the "ikeep" option is set rather than "noikeep".
This regression was introduced in 970451.
With no mount options specified, xfs_parseargs() does the following:
int ikeep = 0;
args->flags |= XFSMNT_BARRIER;
args->flags2 |= XFSMNT2_COMPAT_IOSIZE;
if (!options)
goto done;
It only sets the above two options by default and before, it also used to
set XFSMNT_IDELETE by default.
If options are specified, then
if (!(args->flags & XFSMNT_DMAPI) && !ikeep)
args->flags |= XFSMNT_IDELETE;
is executed later on which is skipped by the "goto done;" above.
The solution is to invert the logic.
SGI-PV: 977771
SGI-Modid: xfs-linux-melb:xfs-kern:30590a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change -I include directives to find headers in the out-of-tree spot. This
allows a directory containing only xfs files to be built as:
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29878a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Makefile (and Kbuild) would include Makefile-linux-26 I doubt XFS will
really still compile on 2.4; so drop that. This moves Makefile-linux-26
into Makefile and drops Kbuild. Also having wrappers as both Kbuild and
Makefile seemed redundant anyways.
The patch is relatively large because it renames a file, but no functional
changes.
SGI-PV: 971050
SGI-Modid: xfs-linux-melb:xfs-kern:29781a
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
remove beX_add functions and replace all uses with beX_add_cpu
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Dave Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (62 commits)
[XFS] add __init/__exit mark to specific init/cleanup functions
[XFS] Fix oops in xfs_file_readdir()
[XFS] kill xfs_root
[XFS] keep i_nlink updated and use proper accessors
[XFS] stop updating inode->i_blocks
[XFS] Make xfs_ail_check check less by default
[XFS] Move AIL pushing into it's own thread
[XFS] use generic_permission
[XFS] stop re-checking permissions in xfs_swapext
[XFS] clean up xfs_swapext
[XFS] remove permission check from xfs_change_file_space
[XFS] prevent panic during log recovery due to bogus op_hdr length
[XFS] Cleanup various fid related bits:
[XFS] Fix xfs_lowbit64
[XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros.
[XFS] kill superflous buffer locking (2nd attempt)
[XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity
[XFS] Remove the BPCSHIFT and NB* based macros from XFS.
[XFS] Remove bogus assert
[XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config
...
When xfs_file_readdir() exactly fills a buffer, it can move it's index
past the end of the buffer and dereference it even though the result of
the dereference is never used. On some platforms this causes an oops.
SGI-PV: 976923
SGI-Modid: xfs-linux-melb:xfs-kern:30458a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The only caller (xfs_fs_fill_super) can simplify call igrab on the root
inode.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30393a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
To get the read-only bind mounts in -mm to work correctly with XFS we need
to call the drop_nlink and inc_nlink helpers to monitor the link count.
Add calls to these to xfs_bumplink and xfs_droplink and stop copying over
di_nlink to i_nlink in xfs_validate_fields and vn_revalidate.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30392a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The VFS doesn't use i_blocks, it's only used by generic_fillattr and the
generic quota code which XFS doesn't use. In XFS there is one use to check
whether we have an inline or out of line sumlink, but we can replace that
with a check of the XFS_IFINLINE inode flag.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30391a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Checking the entire AIL on every insert and remove is prohibitively
expensive - the sustained sequntial create rate on a single disk drops
from about 1800/s to 60/s because of this checking resulting in the
xfslogd becoming cpu bound.
By default on debug builds, only check the next and previous entries in
the list to ensure they are ordered correctly. If you really want, define
XFS_TRANS_DEBUG to use the old behaviour.
SGI-PV: 972759
SGI-Modid: xfs-linux-melb:xfs-kern:30372a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When many hundreds to thousands of threads all try to do simultaneous
transactions and the log is in a tail-pushing situation (i.e. full), we
can get multiple threads walking the AIL list and contending on the AIL
lock.
The AIL push is, in effect, a simple I/O dispatch algorithm complicated by
the ordering constraints placed on it by the transaction subsystem. It
really does not need multiple threads to push on it - even when only a
single CPU is pushing the AIL, it can push the I/O out far faster that
pretty much any disk subsystem can handle.
So, to avoid contention problems stemming from multiple list walkers, move
the list walk off into another thread and simply provide a "target" to
push to. When a thread requires a push, it sets the target and wakes the
push thread, then goes to sleep waiting for the required amount of space
to become available in the log.
This mechanism should also be a lot fairer under heavy load as the waiters
will queue in arrival order, rather than queuing in "who completed a push
first" order.
Also, by moving the pushing to a separate thread we can do more
effectively overload detection and prevention as we can keep context from
loop iteration to loop iteration. That is, we can push only part of the
list each loop and not have to loop back to the start of the list every
time we run. This should also help by reducing the number of items we try
to lock and/or push items that we cannot move.
Note that this patch is not intended to solve the inefficiencies in the
AIL structure and the associated issues with extremely large list
contents. That needs to be addresses separately; parallel access would
cause problems to any new structure as well, so I'm only aiming to isolate
the structure from unbounded parallelism here.
SGI-PV: 972759
SGI-Modid: xfs-linux-melb:xfs-kern:30371a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all direct caller of xfs_iaccess are gone we can kill xfs_iaccess
and xfs_access and just use generic_permission with a check_acl callback.
This is required for the per-mount read-only patchset in -mm to work
properly with XFS.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30370a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_swapext should simplify check if we have a writeable file descriptor
instead of re-checking the permissions using xfs_iaccess. Add an
additional check to refuse O_APPEND file descriptors because swapext is
not an append-only write operation.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30369a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Both callers of xfs_change_file_space alreaedy do the file->f_mode &
FMODE_WRITE check to ensure we have a file descriptor that has been opened
for write mode, so there is no need to re-check that with xfs_iaccess.
Especially as the later might wrongly deny it for corner cases like file
descriptor passing through unix domain sockets.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30365a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
A problem was reported where a system panicked in log recovery due to a
corrupt log record. The cause of the corruption is not known but this
change will at least prevent a crash for this specific scenario. Log
recovery definitely needs some more work in this area.
SGI-PV: 974151
SGI-Modid: xfs-linux-melb:xfs-kern:30318a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
- merge xfs_fid2 into it's only caller xfs_dm_inode_to_fh.
- remove xfs_vget and opencode it in the two callers, simplifying
both of them by avoiding the awkward calling convetion.
- assign directly to the dm_fid_t members in various places in the
dmapi code instead of casting them to xfs_fid_t first (which
is identical to dm_fid_t)
SGI-PV: 974747
SGI-Modid: xfs-linux-melb:xfs-kern:30258a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_lowbit64 was broken on 32 bit platforms in a recent cleanup of the xfs
bitops. Fix it back up again.
SGI-PV: 974005
SGI-Modid: xfs-linux-melb:xfs-kern:30202a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.
A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There is no need to lock any page in xfs_buf.c because we operate on our
own address_space and all locking is covered by the buffer semaphore. If
we ever switch back to main blockdeive address_space as suggested e.g. for
fsblock with a similar scheme the locking will have to be totally revised
anyway because the current scheme is neither correct nor coherent with
itself.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30156a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30098a
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not
used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to
be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE
where appropriate. Initial patch and motivation from Nicolas Kaiser.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30096a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This assert is bogus. We can have a forced shutdown occur
between the check for the XLOG_FORCED_SHUTDOWN and the ASSERT. Also, the
logging system shouldn't care about the state of XFS_FORCED_SHUTDOWN, it
should only check XLOG_FORCED_SHUTDOWN. The logging system has it's own
forced shutdown flag so, for the case of a forced shutdown that's not due
to a logging error, we can flush the log.
SGI-PV: 972985
SGI-Modid: xfs-linux-melb:xfs-kern:30029a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if
CONFIG_XFS_RT is off. This should be safe because mount checks in
xfs_rtmount_init:
so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be
encountered after that.
Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space,
presumeably gcc can optimize around the various "if (0)" type checks:
xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8
xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8
<-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4
xfs_qm_vop_chown_reserve -4
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30014a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Mount option parsing is platform specific. Move it out of core code into
the platform specific superblock operation file.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30012a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Implement the new generic callout for file preallocation. Atomically
change the file size if requested.
SGI-PV: 972756
SGI-Modid: xfs-linux-melb:xfs-kern:30009a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The log force added in xfs_iget_core() has been a performance issue since
it was introduced for tight loops that allocate then unlink a single file.
under heavy writeback, this can introduce unnecessary latency due tothe
log I/o getting stuck behind bulk data writes.
Fix this latency problem by avoinding the need for the log force by moving
the place we mark linux inode dirty to the transaction commit rather than
on transaction completion.
This also closes a potential hole in the sync code where a linux inode is
not dirty between the time it is modified and the time the log buffer has
been written to disk.
SGI-PV: 972753
SGI-Modid: xfs-linux-melb:xfs-kern:30007a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Prevent transaction overrun in xfs_iomap_write_allocate() if we race with
a truncate that overlaps the delalloc range we were planning to allocate.
If we race, we may allocate into a hole and that requires block
allocation. At this point in time we don't have a reservation for block
allocation (apart from metadata blocks) and so allocating into a hole
rather than a delalloc region results in overflowing the transaction block
reservation.
Fix it by only allowing a single extent to be allocated at a time.
SGI-PV: 972757
SGI-Modid: xfs-linux-melb:xfs-kern:30005a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There are several mount options that don't show up in /proc/mounts. Add
them in and clean up the showargs code at the same time.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30004a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Sparse trips over the locking order in xlog_recover_do_efd_trans() when
xfs_trans_delete_ail() drops the ail lock. Because the unlock is
conditional, we need to either annotate with a "fake unlock" or change the
structure of the code so sparse thinks the function always unlocks.
Reordering the code makes it simpler, so do that.
SGI-PV: 972755
SGI-Modid: xfs-linux-melb:xfs-kern:30003a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
These are mostly locking annotations, marking things static, casts where
needed and declaring stuff in header files.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30002a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We need xfs_bulkstat() to report inode stat for inodes with link count
zero but reference count non zero.
The fix here:
http://oss.sgi.com/archives/xfs/2007-09/msg00266.html
changed this behavior and made xfs_bulkstat() to filter all unlinked
inodes including those that are not destroyed yet but held by reference.
The attached patch returns back to the original behavior by marking the
on-disk inode buffer "dirty" when di_mode is cleared (at that time both
inode link and reference counter are zero).
SGI-PV: 972004
SGI-Modid: xfs-linux-melb:xfs-kern:29914a
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS_IOC_GETVERSION, XFS_IOC_GETXFLAGS and XFS_IOC_SETXFLAGS all take a
"long" which changes size between 32 and 64 bit platforms.
So, the ioctl cmds that come in from a 32-bit app aren't as expected, for
example on GETXFLAGS,
unknown cmd fd(3) cmd(80046601){t:'f';sz:4}
due to the size mismatch.
So, use instead the 32-bit version of the commands for compat ioctls, and
other than that it doesn't take any more manipulation.
Also, for both native and compat versions, just define them to the values
as defined in fs.h
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29849a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need for xfs to have its own hex dumping routine now that the kernel
has one.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29847a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
This macro is unused an all other acros in this family operate on native
types, so we most likely won't grow a user either.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29846a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
There is no need to lock any page in xfs_buf.c because we operate on our
own address_space and all locking is covered by the buffer semaphore. If
we ever switch back to main blockdeive address_space as suggested e.g. for
fsblock with a similar scheme the locking will have to be totally revised
anyway because the current scheme is neither correct nor coherent with
itself.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29845a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Refactoring xfs_mountfs() to call sub-functions for logical chunks can
help save a bit of stack, and can make it easier to read this long
function.
The mount path is one of the longest common callchains, easily getting to
within a few bytes of the end of a 4k stack when over lvm, quotas are
enabled, and quotacheck must be done.
With this change on top of the other stack-related changes I've sent, I
can get xfs to survive a normal xfsqa run on 4k stacks over lvm.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29834a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Mostly trivial conversion with one exceptions: h_num_logops was kept in
native endian previously and only converted to big endian in xlog_sync,
but we always keep it big endian now. With todays cpus fast byteswap
instructions that's not an issue but the new variant keeps the code clean
and maintainable.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29821a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
- the various assign lsn macros are replaced by a single inline,
xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except
for a more sane calling convention. ASSIGN_LSN_DISK is replaced
by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same,
except we pass the cycle and block arguments explicitly instead of a
log paramter. The latter two variants only had 2, respectively one
user anyway.
- the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the
same calling conventions.
- GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away
the unused arch argument. Instead of conditional defintions
depending on host endianess we now do an unconditional swap and shift
then, which generates equal code.
- the unused XLOG_SET macro is removed.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29820a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
- the various assign lsn macros are replaced by a single inline,
xlog_assign_lsn, which is equivalent to ASSIGN_ANY_LSN_HOST except
for a more sane calling convention. ASSIGN_LSN_DISK is replaced
by xlog_assign_lsn and a manual bytespap, and ASSIGN_LSN by the same,
except we pass the cycle and block arguments explicitly instead of a
log paramter. The latter two variants only had 2, respectively one
user anyway.
- the GET_CYCLE is replaced by a xlog_get_cycle inline with exactly the
same calling conventions.
- GET_CLIENT_ID is replaced by xlog_get_client_id which leaves away
the unused arch argument. Instead of conditional defintions
depending on host endianess we now do an unconditional swap and shift
then, which generates equal code.
- the unused XLOG_SET macro is removed.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29819a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need to have a wrapper just two call two more functions.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29816a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Get rid of vnode useage in xfs_iget.c and pass Linux inode / xfs_inode
where apropinquate. And kill some useless helpers while we're at it.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29808a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_ioctl.c passes around vnode pointers quite a lot, but all places
already have the Linux inode which is identical to the vnode these days.
Clean the code up to always use the Linux inode.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29807a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
We were already filling the Linux struct statfs anyway, and doing this
trivial task directly in xfs_fs_statfs makes the code quite a bit cleaner.
While I was at it I also moved copying attributes that don't change over
the lifetime of the filesystem outside the superblock lock.
xfs_fs_fill_super used to get the magic number and blocksize through
xfs_statvfs, but assigning them directly is a lot cleaner and will save
some stack space during mount.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29802a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Just fill in struct kstat directly from the xfs_inode instead of doing a
detour through a bhv_vattr_t and xfs_getattr.
SGI-PV: 970980
SGI-Modid: xfs-linux-melb:xfs-kern:29770a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.
SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
remove spinlock init abstraction macro in spin.h, remove the callers, and
remove the file. Move no-op spinlock_destroy to xfs_linux.h Cleanup
spinlock locals in xfs_mount.c
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29751a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate XFS_SB_LOCK, remove XFS_SB_LOCK->mutex_lock->spin_lock
macros, call spin_lock directly, remove extraneous cookie holdover from
old xfs code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29746a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate dabuf_global_lock, remove mutex_lock->spin_lock macros, call
spin_lock directly, remove extraneous cookie holdover from old xfs code,
and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29744a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate pagb_lock, remove mutex_lock->spin_lock macros, call
spin_lock directly, remove extraneous cookie holdover from old xfs code,
and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29743a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate DQ_PINLOCK, remove DQ_PINLOCK->mutex_lock->spin_lock macros,
call spin_lock directly, remove extraneous cookie holdover from old xfs
code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29742a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate GRANT_LOCK, remove GRANT_LOCK->mutex_lock->spin_lock macros,
call spin_lock directly, remove extraneous cookie holdover from old xfs
code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29741a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate LOG_LOCK, remove LOG_LOCK->mutex_lock->spin_lock macros, call
spin_lock directly, remove extraneous cookie holdover from old xfs code,
and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29740a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Currently there is an indirection called ioops in the XFS data I/O path.
Various functions are called by functions pointers, but there is no
coherence in what this is for, and of course for XFS itself it's entirely
unused. This patch removes it instead and significantly reduces source and
binary size of XFS while making maintaince easier.
SGI-PV: 970841
SGI-Modid: xfs-linux-melb:xfs-kern:29737a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need to allocate a bhv_vattr_t on stack and call xfs_getattr to update
a few fields in the Linux inode from the XFS inode, just do it directly.
And yes, this function is in dire need of a better name and prototype,
I'll do in a separate patch, though.
SGI-PV: 970705
SGI-Modid: xfs-linux-melb:xfs-kern:29713a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
There is no reason to go through xfs_iomap for the BMAPI_UNWRITTEN because
it has nothing in common with the other cases. Instead check for the
shutdown filesystem in xfs_end_bio_unwritten and perform a direct call to
xfs_iomap_write_unwritten (which should be renamed to something more
sensible one day)
SGI-PV: 970241
SGI-Modid: xfs-linux-melb:xfs-kern:29681a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
There is no reason to go into the iomap machinery just to get the right
block device for an inode. Instead look at the realtime flag in the inode
and grab the right device from the mount structure.
I created a new helper, xfs_find_bdev_for_inode instead of opencoding it
because I plan to use it in other places in the future.
SGI-PV: 970240
SGI-Modid: xfs-linux-melb:xfs-kern:29680a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Simplify vnode tracing calls by embedding function name & return addr in
the calling macro.
Also do a lot of vnode->inode renaming for consistency, while we're at it.
SGI-PV: 970335
SGI-Modid: xfs-linux-melb:xfs-kern:29650a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
A large part of xfs_sync_inodes is conditional on the SYNC_BDFLUSH which
is never passed to it. This patch removes it and adds an assert that
triggers in case some new code tries to pass SYNC_BDFLUSH to it.
SGI-PV: 970242
SGI-Modid: xfs-linux-melb:xfs-kern:29630a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Checking if an address is a vmalloc address is done in a couple of places.
Define a common version in mm.h and replace the other checks.
Again the include structures suck. The definition of VMALLOC_START and
VMALLOC_END is not available in vmalloc.h since highmem.c cannot be included
there.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify page cache zeroing of segments of pages through 3 functions
zero_user_segments(page, start1, end1, start2, end2)
Zeros two segments of the page. It takes the position where to
start and end the zeroing which avoids length calculations and
makes code clearer.
zero_user_segment(page, start, end)
Same for a single segment.
zero_user(page, start, length)
Length variant for the case where we know the length.
We remove the zero_user_page macro. Issues:
1. Its a macro. Inline functions are preferable.
2. The KM_USER0 macro is only defined for HIGHMEM.
Having to treat this special case everywhere makes the
code needlessly complex. The parameter for zeroing is always
KM_USER0 except in one single case that we open code.
Avoiding KM_USER0 makes a lot of code not having to be dealing
with the special casing for HIGHMEM anymore. Dealing with
kmap is only necessary for HIGHMEM configurations. In those
configurations we use KM_USER0 like we do for a series of other
functions defined in highmem.h.
Since KM_USER0 is depends on HIGHMEM the existing zero_user_page
function could not be a macro. zero_user_* functions introduced
here can be be inline because that constant is not used when these
functions are called.
Also extract the flushing of the caches to be outside of the kmap.
[akpm@linux-foundation.org: fix nfs and ntfs build]
[akpm@linux-foundation.org: fix ntfs build some more]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch should fix the issue seen on Alpha with unaligned accesses in
the new readdir code. By aligning each dirent to sizeof(u64) we'll avoid
unaligned accesses. To make doubly sure we're not hitting problems also
rearrange struct hack_dirent to avoid holes.
SGI-PV: 975411
SGI-Modid: xfs-linux-melb:xfs-kern:30302a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
After reading the directory contents into the temporary buffer, we grab
each dirent and pass it to filldir witht eh current offset of the dirent.
The current offset was not being set for the first dirent in the temporary
buffer, which coul dresult in bad offsets being set in the f_pos field
result in looping and duplicate entries being returned from readdir.
SGI-PV: 974905
SGI-Modid: xfs-linux-melb:xfs-kern:30282a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This was broken by my '[XFS] simplify xfs_create/mknod/symlink prototype',
which assigned the re-shuffled ondisk dev_t back to the rdev variable in
xfs_vn_mknod. Because of that i_rdev is set to the ondisk dev_t instead of
the linux dev_t later down the function.
Fortunately the fix for it is trivial: we can just remove the assignment
because xfs_revalidate_inode has done the proper job before unlocking the
inode.
SGI-PV: 974873
SGI-Modid: xfs-linux-melb:xfs-kern:30273a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The recent filldir regression fix was not putting the correct d_off in
each dirent. This was resulting in incorrect cookies being passed to dmapi
ioctls and the wrong offset appearing in the dirents. readdir was
unaffected as the filp->f_pos was being updated with the correct offset
and this was being written into the last dirent in each buffer. Fix the
XFS code to do the right thing.
SGI-PV: 973746
SGI-Modid: xfs-linux-melb:xfs-kern:30240a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On last close of a file we purge blocks beyond eof. The same code is used
when we truncate the file size down. In this case we need to wait for any
pending I/Os for dirty pages beyond the new eof. For the last close case
we are not changing the file size and therefore do not need to wait for
any I/Os to complete. This fixes a performance bottleneck where writes
into the page cache and cache flushes can become mutually exclusive.
SGI-PV: 964002
SGI-Modid: xfs-linux-melb:xfs-kern:30220a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] Fix xfs_ichgtime()s broken usage of I_SYNC
[XFS] Make xfsbufd threads freezable
[XFS] revert to double-buffering readdir
[XFS] Fix broken inode cluster setup.
[XFS] Clear XBF_READ_AHEAD flag on I/O completion.
[XFS] Fixed a few bugs in xfs_buf_associate_memory()
[XFS] 971064 Various fixups for xfs_bulkstat().
[XFS] Fix dbflush panic in xfs_qm_sync.
The recent I_LOCK->I_SYNC changes mistakenly changed xfs_ichgtime to look
at I_SYNC instead of I_LOCK. This was incorrect and prevents newly created
inodes from moving to the dirty list. Change this to the correct check
which is for I_NEW, not I_LOCK or I_SYNC so that behaviour is correct.
SGI-PV: 974225
SGI-Modid: xfs-linux-melb:xfs-kern:30204a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Fix breakage caused by commit 8314418629
that did not introduce the necessary call to set_freezable() in
xfs/linux-2.6/xfs_buf.c .
SGI-PV: 974224
SGI-Modid: xfs-linux-melb:xfs-kern:30203a
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The current readdir implementation deadlocks on a btree buffers locks
because nfsd calls back into ->lookup from the filldir callback. The only
short-term fix for this is to revert to the old inefficient
double-buffering scheme.
SGI-PV: 973377
SGI-Modid: xfs-linux-melb:xfs-kern:30201a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The radix tree based inode caches did away with the inode cluster hashes,
replacing them with a bunch of masking and gang lookups on the radix tree.
This masking got broken when moving the code to per-ag radix trees and
indexing by agino # rather than straight inode number. The result is
clustered inode writeback does not cluster and things can go extremely
slowly when there are lots of inodes to write.
Fix it up by comparing the agino # of the inode we just looked up to the
index of the cluster we are looking for.
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
SGI-PV: 972915
SGI-Modid: xfs-linux-melb:xfs-kern:30033a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- calculation of 'page_count' was incorrect as it did not
consider the offset of 'mem' into the first page. The
logic to bump 'page_count' didn't work if 'len' was <=
PAGE_CACHE_SIZE (ie offset = 3k, len = 2k).
- setting b_buffer_length to 'len' is incorrect if 'offset'
is > 0. Set it to the total length of the buffer.
- I suspect that passing a non-aligned address into
mem_to_page() for the first page may have been causing
issues - don't know but just tidy up that code anyway.
SGI-PV: 971596
SGI-Modid: xfs-linux-melb:xfs-kern:30143a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
- sanity check for NULL user buffer in xfs_ioc_bulkstat[_compat]()
- remove the special case for XFS_IOC_FSBULKSTAT with count == 1. This
special case causes bulkstat to fail because the special case uses
xfs_bulkstat_single() instead of xfs_bulkstat() and the two functions
have different semantics. xfs_bulkstat() will return the next inode
after the one supplied while skipping internal inodes (ie quota inodes).
xfs_bulkstate_single() will only lookup the inode supplied and return
an error if it is an internal inode.
- in xfs_bulkstat(), need to initialise 'lastino' to the inode supplied
so in cases were we return without examining any inodes the scan wont
restart back at zero.
- sanity check for valid *ubcountp values. Cannot sanity check for valid
ubuffer here because some users of xfs_bulkstat() don't supply a buffer.
- checks against 'ubleft' (the space left in the user's buffer) should be
against 'statstruct_size' which is the supplied minimum object size.
The mixture of checks against statstruct_size and 0 was one of the
reasons we were skipping inodes.
- if the formatter function returns BULKSTAT_RV_NOTHING and an error and
the error is not ENOENT or EINVAL then we need to abort the scan. ENOENT
is for inodes that are no longer valid and we just skip them. EINVAL is
returned if we try to lookup an internal inode so we skip them too. For
a DMF scan if the inode and DMF attribute cannot fit into the space left
in the user's buffer it would return ERANGE. We didn't handle this error
and skipped the inode. We would continue to skip inodes until one fitted
into the user's buffer or we completed the scan.
- put back the recalculation of agino (that got removed with the last fix)
at the end of the while loop. This is because the code at the start of
the loop expects agino to be the last inode examined if it is non-zero.
- if we found some inodes but then encountered an error, return success
this time and the error next time. If the formatter aborted with ENOMEM
we will now return this error but only if we couldn't read any inodes.
Previously if we encountered ENOMEM without reading any inodes we
returned a zero count and no error which falsely indicated the scan was
complete.
SGI-PV: 973431
SGI-Modid: xfs-linux-melb:xfs-kern:30089a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
The recent behaviour layer removal dropped the check for quotas that have
been requested at mount time but have subsequently been turned off. This
results in a panic when accessing m_quotainfo which has been freed.
This patch adds the check originally made by xfs_qm_syncall() to
xfs_qm_sync().
SGI-PV: 969769
SGI-Modid: xfs-linux-melb:xfs-kern:29908a
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that nfsd has stopped writing to the find_exported_dentry member we an
mark the export_operations const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This one is a lot more complicated than the previous ones. XFS already had a
very clever scheme for supporting 64bit inode numbers in filehandles, and I've
reworked this to be some kind of a prototype for the generic 64bit inode
filehandle support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently XFs has three different fid types: struct fid, struct xfs_fid
and struct xfs_fid2 with hte latter two beeing identicaly and the first
one beeing the same size but an unstructured array with the same size.
This patch consolidates all this to alway uuse struct xfs_fid.
This patch is required for an upcoming patch series from me that revamps
the nfs exporting code and introduces a Linux-wide struct fid.
SGI-PV: 970336
SGI-Modid: xfs-linux-melb:xfs-kern:29651a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Fixup for lack of dmapi support and no quota module support.
SGI-PV: 969985
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (59 commits)
[XFS] eagerly remove vmap mappings to avoid upsetting Xen
[XFS] simplify validata_fields
[XFS] no longer using io_vnode, as was remaining from 23 cherrypick
[XFS] Remove STATIC which was missing from prior manual merge
[XFS] Put back the QUEUE_ORDERED_NONE test in the barrier check.
[XFS] Turn off XBF_ASYNC flag before re-reading superblock.
[XFS] avoid race in sync_inodes() that can fail to write out all dirty data
[XFS] This fix prevents bulkstat from spinning in an infinite loop.
[XFS] simplify xfs_create/mknod/symlink prototype
[XFS] avoid xfs_getattr in XFS_IOC_FSGETXATTR ioctl
[XFS] get_bulkall() could return incorrect inode state
[XFS] Kill unused IOMAP_EOF flag
[XFS] fix when DMAPI mount option processing happens
[XFS] ensure file size is logged on synchronous writes
[XFS] growlock should be a mutex
[XFS] replace some large xfs_log_priv.h macros by proper functions
[XFS] kill struct bhv_vfs
[XFS] move syncing related members from struct bhv_vfs to struct xfs_mount
[XFS] kill the vfs_flags member in struct bhv_vfs
[XFS] kill the vfs_fsid and vfs_altfsid members in struct bhv_vfs
...
I_LOCK was used for several unrelated purposes, which caused deadlock
situations in certain filesystems as a side effect. One of the purposes
now uses the new I_SYNC bit.
Also document the various bits and change their order from historical to
logical.
[bunk@stusta.de: make fs/inode.c:wake_up_inode() static]
Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Anton Altaparmakov <aia21@cam.ac.uk>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi <miklos@szeredi.hu> and me identified a writeback bug:
> The following strange behavior can be observed:
>
> 1. large file is written
> 2. after 30 seconds, nr_dirty goes down by 1024
> 3. then for some time (< 30 sec) nothing happens (disk idle)
> 4. then nr_dirty again goes down by 1024
> 5. repeat from 3. until whole file is written
>
> So basically a 4Mbyte chunk of the file is written every 30 seconds.
> I'm quite sure this is not the intended behavior.
It can be produced by the following test scheme:
# cat bin/test-writeback.sh
grep nr_dirty /proc/vmstat
echo 1 > /proc/sys/fs/inode_debug
dd if=/dev/zero of=/var/x bs=1K count=204800&
while true; do grep nr_dirty /proc/vmstat; sleep 1; done
# bin/test-writeback.sh
nr_dirty 19207
nr_dirty 19207
nr_dirty 30924
204800+0 records in
204800+0 records out
209715200 bytes (210 MB) copied, 1.58363 seconds, 132 MB/s
nr_dirty 47150
nr_dirty 47141
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47205
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47214
nr_dirty 47215
nr_dirty 47216
nr_dirty 47216
nr_dirty 47216
nr_dirty 47154
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47143
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47142
nr_dirty 47134
nr_dirty 47134
nr_dirty 47135
nr_dirty 47135
nr_dirty 47135
nr_dirty 46097 <== -1038
nr_dirty 46098
nr_dirty 46098
nr_dirty 46098
[...]
nr_dirty 46091
nr_dirty 46092
nr_dirty 46092
nr_dirty 45069 <== -1023
nr_dirty 45056
nr_dirty 45056
nr_dirty 45056
[...]
nr_dirty 37822
nr_dirty 36799 <== -1023
[...]
nr_dirty 36781
nr_dirty 35758 <== -1023
[...]
nr_dirty 34708
nr_dirty 33672 <== -1024
[...]
nr_dirty 33692
nr_dirty 32669 <== -1023
% ls -li /var/x
847824 -rw-r--r-- 1 root root 200M 2007-08-12 04:12 /var/x
% dmesg|grep 847824 # generated by a debug printk
[ 529.263184] redirtied inode 847824 line 548
[ 564.250872] redirtied inode 847824 line 548
[ 594.272797] redirtied inode 847824 line 548
[ 629.231330] redirtied inode 847824 line 548
[ 659.224674] redirtied inode 847824 line 548
[ 689.219890] redirtied inode 847824 line 548
[ 724.226655] redirtied inode 847824 line 548
[ 759.198568] redirtied inode 847824 line 548
# line 548 in fs/fs-writeback.c:
543 if (wbc->pages_skipped != pages_skipped) {
544 /*
545 * writeback is not making progress due to locked
546 * buffers. Skip this inode for now.
547 */
548 redirty_tail(inode);
549 }
More debug efforts show that __block_write_full_page()
never has the chance to call submit_bh() for that big dirty file:
the buffer head is *clean*. So basicly no page io is issued by
__block_write_full_page(), hence pages_skipped goes up.
Also the comment in generic_sync_sb_inodes():
544 /*
545 * writeback is not making progress due to locked
546 * buffers. Skip this inode for now.
547 */
and the comment in __block_write_full_page():
1713 /*
1714 * The page was marked dirty, but the buffers were
1715 * clean. Someone wrote them back by hand with
1716 * ll_rw_block/submit_bh. A rare case.
1717 */
do not quite agree with each other. The page writeback should be skipped for
'locked buffer', but here it is 'clean buffer'!
This patch fixes this bug. Though I'm not sure why __block_write_full_page()
is called only to do nothing and who actually issued the writeback for us.
This is the two possible new behaviors after the patch:
1) pretty nice: wait 30s and write ALL:)
2) not so good:
- during the dd: ~16M
- after 30s: ~4M
- after 5s: ~4M
- after 5s: ~176M
The next patch will fix case (2).
Cc: David Chinner <dgc@sgi.com>
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
XFS leaves stray mappings around when it vmaps memory to make it virtually
contigious. This upsets Xen if one of those pages is being recycled into a
pagetable, since it finds an extra writable mapping of the page.
This patch solves the problem in a brute force way, by making XFS always
eagerly unmap its mappings.
SGI-PV: 971902
SGI-Modid: xfs-linux-melb:xfs-kern:29886a
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Stop using xfs_getattr and a onstack bhv_vattr_t just to get three fields
from the underlying inode and opencode copying from the inode fields
instead.
SGI-PV: 970662
SGI-Modid: xfs-linux-melb:xfs-kern:29711a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Because we cherrypicked SGI-Modid xfs-linux-melb:xfs-kern:29675a
and it depended on the sgi mod which removed io_vnode (which was
not cherrypicked in 23) it was hand modified.
This fixes things back up (to the originial mod) now we have moved
on again.
Reviewed-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Removes STATIC on xfs_freeze function which was not manually
applied for SGI-Modid: xfs-linux-melb:xfs-kern:29504a.
Reviewed-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Put back the QUEUE_ORDERED_NONE test which caused us grief in sles when it
was taken out as, IIRC, it allowed md/lvm to be thought of as supporting
barriers when they weren't in some configurations. This patch will be
reverting what went in as part of a change for the SGI-pv 964544
(SGI-Modid: xfs-linux-melb:xfs-kern:28568a).
SGI-PV: 971783
SGI-Modid: xfs-linux-melb:xfs-kern:29882a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
In xfs_fs_sync_super() treat a sync the same as a filesystem freeze. This
is needed to force the log to disk for inodes which are not marked dirty
in the Linux inode (the inodes are marked dirty on completion of the log
I/O) and so sync_inodes() will not flush them.
In xfs_fs_write_inode() a synchronous flush will not get an EAGAIN from
xfs_inode_flush() and if an asynchronous flush returns EAGAIN we should
pass it on to the caller. If we get an error while flushing the inode then
re-dirty it so we can try again later.
SGI-PV: 971670
SGI-Modid: xfs-linux-melb:xfs-kern:29860a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Here 'agino' increments through the inodes in an allocation group. At the
end of the innermost 'for' loop it will hold the value of the next inode
to look at (ie the first inode in the next cluster/chunk). Assigning
'lastino' to 'agino' resets it to the last inode in the last inode cluster
we just looked at. This causes us to look up the very same cluster and
examine all the inodes all over again, and again, and again...
We also want to set 'lastino' for the cases when we're not interested in
the inode so that the next call to bulkstat won't re-examine the same
uninteresting inodes.
SGI-PV: 971064
SGI-Modid: xfs-linux-melb:xfs-kern:29840a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Simplify the prototype for xfs_create/xfs_mkdir/xfs_symlink by not passing
down a bhv_vattr_t that just hogs stack space. Instead pass down the mode
in a mode_t and in case of xfs_create the rdev as a scalar type as well.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29794a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
No need to call into xfs_getattr and put a big bhv_vattr_t on the stack
just to get a little information from the XFS inode.
Add a helper called xfs_ioc_fsgetxattr instead that deals with retrieving
the information in a clean way.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29780a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
In the following scenario xfs_bulkstat() returns incorrect stale inode
state:
1. File_A is created and its inode synced to disk. 2. File_A is unlinked
and doesn't exist anymore. 3. Filesystem sync is invoked. 4. File_B is
created. File_B happens to reclaim File_A's inode. 5. xfs_bulkstat() is
called and detects File_B but reports the
incorrect File_A inode state.
Explanation for the incorrect inode state is that inodes are not
immediately synced on file create for performance reasons. This leaves the
on-disk inode buffer uninitialized (or with old state from a previous
generation inode) and this is what xfs_bulkstat() would report.
The patch marks the on-disk inode buffer "dirty" on unlink. When the inode
is reclaimed (by a new file create), xfs_bulkstat() would filter this
inode by the "dirty" mark. Once the inode is flushed to disk, the on-disk
buffer "dirty" mark is automatically removed and a following
xfs_bulkstat() would return the correct inode state.
Marking the on-disk inode buffer "dirty" on unlink is achieved by setting
the on-disk di_nlink field to 0. Note that the in-core di_nlink has
already been set to 0 and a corresponding transaction logged by
xfs_droplink(). This is an exception from the rule that any on-disk inode
buffer changes has to be followed by a disk write (inode flush).
Synchronizing the in-core to on-disk di_nlink values in advance (before
the actual inode flush to disk) should be fine in this case because the
inode is already unlinked and it would never change its di_nlink again for
this inode generation.
SGI-PV: 970842
SGI-Modid: xfs-linux-melb:xfs-kern:29757a
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Fix for a regression caused by a recent patch
that moved the DMAPI mount option processing inside xfs_parseargs(). The
DMAPI mount option used to be processed in the DMAPI module loaded before
xfs_parseargs() was invoked.
SGI-PV: 970451
SGI-Modid: xfs-linux-melb:xfs-kern:29683a
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Synchronous writes currently log inode changes before syncing pages to
disk. Since the file size is updated on I/O completion we wont be writing
out the updated file size and if we crash the file will have the wrong
size. This change moves the logging after the syncing of the pages to
ensure we log the correct file size.
SGI-PV: 970334
SGI-Modid: xfs-linux-melb:xfs-kern:29649a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
m_growlock only needs plain binary mutex semantics, so use a struct mutex
instead of a semaphore for it.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29512a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
... or in the case of XLOG_TIC_ADD_OPHDR remove a useless macro entirely.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29511a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Now that struct bhv_vfs doesn't have any members left we can kill it and
go directly from the super_block to the xfs_mount everywhere.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29509a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
vfs_altfsid was just a pointer to mp->m_fixedfsid so we can trivially
replace it with the latter. vfs_fsid also was identical to m_fixedfsid
through rather obfuscated ways so we can kill it as well and simply its
only user.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29506a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Also remove the now dead behavior code.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29505a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All vfs ops now take struct xfs_mount pointers and the behaviour related
glue is split out into methods of its own.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29504a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Mount options are now parsed by the main XFS module and rejected if quota
support is not available, and there are some new quota operation for the
quotactl syscall and calls to quote in the mount, unmount and sync
callchains.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29503a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Mount options are now parsed by the main XFS module and rejected if dmapi
support is not available, and there is a new dm operation to send the
mount event.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29502a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
In the next patch we need to look at the mount structure until just before
it's freed, so we need to be able to free it as the very last thing in
xfs_unmount.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29501a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t
as a typedef for struct inode for the time being until all the fallout is
cleaned up.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29500a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
It's entirely unused except for ignored arguments in the mrlock
initialization, so remove it.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29499a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All flags previously handled at the vnode level are not in the xfs_inode
where we already have a flags mechanisms and free bits for flags
previously in the vnode.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29495a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
We can easily get at the vfsp through the super_block but it will soon be
gone anyway.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29494a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All vnode ops now take struct xfs_inode pointers and the behaviour related
glue is split out into methods of it's own. This required fixing
xfs_create/mkdir/symlink to not mess with the inode pointer but rather use
a separate boolean for error handling. Thanks to Dave Chinner for that
fix.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29492a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
XFS inodes are dynamically allocated on demand, rather than being
allocated at mkfs time. Chunks of 64 inodes are allocated at once, but
they are never freed. Over time, this can lead to filesystem
fragmentation, clusters of inodes and the btrees which point at them can
be scattered around the system.
By freeing clusters as they are emptied, we will reduce fragmentation of
the free space after removing files. This in turn will allow us to make
better placement decisions when repopulating a filesystem. The
XFSMNT_IDELETE mount option enables freeing clusters when they get empty.
Unfortunately a side effect of freeing inode clusters is that the inode
generation numbers of such inodes would be reset to zero when the cluster
is reclaimed. This is a problem in particular for a DMAPI enabled
filesystem as the the DMAPI handles need to be unique and persistent in
time. An unique DMAPI handle is built with the help of the inode
generation number. When the last one is prematurely reset by an inode
cluster reclaim, there is a high probability of different generation
inodes to end up having identical DMAPI handles.
To avoid the problem with identical DMAPI handles, the XFSMNT_IDELETE
mount option should be set as default, only if the filesystem is not
mounted with XFSMNT_DMAPI.
SGI-PV: 969192
SGI-Modid: xfs-linux-melb:xfs-kern:29486a
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.
As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.
A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.
The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....
SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Kill uio related functions and defines now that they're unused.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29480a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Simplify the readlink code to get rid of the last user of uio.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29479a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Currently xfs has a rather complicated internal scheme to allow for
different directory formats in IRIX. This patch rips all code related to
this out and pushes useage of the Linux filldir callback into the lowlevel
directory code. This does not make the code any less portable because
filldir can be used to create dirents of all possible variations
(including the IRIX ones as proved by the IRIX binary emulation code under
arch/mips/).
This patch get rid of an unessecary copy in the readdir path, about 400
lines of code and one of the last two users of the uio structure.
This version is updated to deal with dmapi aswell which greatly simplifies
the get_dirattrs code. The dmapi part has been tested using the
get_dirattrs tools from the xfstest dmapi suite1 with various small and
large directories.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29478a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the
incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the
incore -> disk conversion. A new helper xfs_sb_from_disk handles the other
direction and doesn't need the slightly hacky table-driven approach
because we only ever read the full sb from disk.
The handling of shared r/o filesystems has been buggy on little endian
system and fixing this required shuffling around of some code in that
area.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29477a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Biggest bit is duplicating the dinode structure so we have one annotated for
native endianess and one for disk endianess. The other significant change
is that xfs_xlate_dinode_core is split into one helper per direction to
allow for proper annotations, everything else is trivial.
As a sidenode splitting out the incore dinode means we can move it into
xfs_inode.h in a later patch and severely improving on the include hell in
xfs.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29476a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
In sgi mod# xfs-linux-melb:xfs-kern:29319a, the variable renaming was not
complete and variable 'b' was left unchanged for non-lbd 32 bit machines.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29469a
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
If we fail to open the the log device buftarg, we can fall through to
error handling code that fails to check for a NULL log device buftarg
before calling xfs_free_buftarg().
This patch fixes the issue by checking mp->m_logdev_targp against NULL in
xfs_unmountfs_close() and doing the proper xfs_blkdev_put(logdev); and
xfs_blkdev_put(rtdev); on (!mp->m_rtdev_targp) in xfs_mount().
Discovered by the Coverity checker.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29328a
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_start_flags can make use of is_power_of_2 to tidy up the test a little
bit.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29327a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Generally we try not to directly include linux header files in core xfs
code; xfs_linux.h is the spot for that.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29326a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Now that nobody's using it, remove xfs_physmem & friends.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29325a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Remove scaling of inode "clusters" based on machine memory; small cluster
cut-point was an unrealistic 32MB and was probably never tested.
Removes another user of xfs_physmem.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29324a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Remove sizing of logbuf size & count based on physical memory; this was
never a very good gauge as it's looking at global memory, but deciding on
sizing per-filesystem; no account is made of the total number of
filesystems, for example.
For now just take the largest "default" case, as was set for machines with
>400MB - 8 x 32k buffers. This can always be tuned higher or lower with
mount options if necessary. Removes one more user of xfs_physmem.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29323a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
m_nreadaheads in the mount struct is never used; remove it and the various
macros assigned to it. Also remove a couple other unused macros in the
same areas.
Removes one user of xfs_physmem.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29322a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The BMBT_*BITLEN are currently defined in a complicated way depending on
XFS_NATIVE_HOST. But if all the macros are expanded they (obviously)
expand to the same value for both cases.
This patch defines the macros in the most simple way and updates the
comment describing them to remove outdated bits.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29320a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_bmbt_set_all/xfs_bmbt_disk_set_all are identical to
xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf except that the former take a
xfs_bmbt_irec_t and the latter take the individual extent fields as scalar
values.
This patch reimplements xfs_bmbt_set_all/xfs_bmbt_disk_set_all as trivial
wrappers around xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf and cleans up the
variable naming in xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf to have some
meaning instead of one char variable names.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29319a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
currently xfs_bmbt_rec_t is used both for ondisk extents as well as
host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native
endian ones and cleans up the fallout. There have been various endianess
issues in the tracing / debug printf code that are fixed by this patch.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29318a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
If the underlying block device suddenly stops supporting barriers, we need
to handle the -EOPNOTSUPP error in a sane manner rather than shutting
down the filesystem. If we get this error, clear the barrier flag, reissue
the I/O, and tell the world bad things are occurring.
SGI-PV: 964544
SGI-Modid: xfs-linux-melb:xfs-kern:28568a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant. Remove it.
Now there is no need for bio_endio to subtract the size completed
from bi_size. So don't do that either.
While we are at it, change bi_end_io to return void.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This reverts commit b394e43e99.
Lachlan McIlroy says:
It tried to fix an issue where log replay is replaying an inode cluster
initialisation transaction that should not be replayed because the inode
cluster on disk is more up to date. Since we don't log file sizes (we
rely on inode flushing to get them to disk) then we can't just replay
all the transations in the log and expect the inode to be completely
restored. We lose file size updates. Unfortunately this fix is causing
more (serious) problems than it is fixing.
SGI-PV: 969656
SGI-Modid: xfs-linux-melb:xfs-kern:29804a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The new xlog_recover_do_reg_buffer checks call be16_to_cpu on di_gen which
is a 32bit value so sparse rightly complains. Fortunately the warning is
harmless because we don't care for the value, but only whether it's
non-NULL. Due to that fact we can simply kill the endian swaps on this and
the previous di_mode check entirely.
SGI-PV: 969656
SGI-Modid: xfs-linux-melb:xfs-kern:29709a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_filestream_mount() sets up an mru cache with:
err = xfs_mru_cache_create(&mp->m_filestream, lifetime, grp_count,
(xfs_mru_cache_free_func_t)xfs_fstrm_free_func);
but that cast is causing problems...
typedef void (*xfs_mru_cache_free_func_t)(unsigned long, void*);
but:
void xfs_fstrm_free_func( xfs_ino_t ino, fstrm_item_t *item)
so on a 32-bit box, it's casting (32, 32) args into (64, 32) and I assume
it's getting garbage for *item, which subsequently causes an explosion.
With this change the filestreams xfsqa tests don't oops on my 32-bit box.
SGI-PV: 967795
SGI-Modid: xfs-linux-melb:xfs-kern:29510a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Eric Sandeen