Commit Graph

206 Commits

Author SHA1 Message Date
Alexander Potashev 4868402d95 x86, boot: Simplify setting of the PAE bit
A single 'movl' is shorter than the 'xorl'-'orl' pair.
No change in behaviour.

Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
LKML-Reference: <1256341043-4928-1-git-send-email-aspotashev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24 11:06:38 +02:00
Linus Torvalds 5bb241b325 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Remove redundant non-NUMA topology functions
  x86: early_printk: Protect against using the same device twice
  x86: Reduce verbosity of "PAT enabled" kernel message
  x86: Reduce verbosity of "TSC is reliable" message
  x86: mce: Use safer ways to access MCE registers
  x86: mce, inject: Use real inject-msg in raise_local
  x86: mce: Fix thermal throttling message storm
  x86: mce: Clean up thermal throttling state tracking code
  x86: split NX setup into separate file to limit unstack-protected code
  xen: check EFER for NX before setting up GDT mapping
  x86: Cleanup linker script using new linker script macros.
  x86: Use section .data.page_aligned for the idt_table.
  x86: convert to use __HEAD and HEAD_TEXT macros.
  x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.
  x86: fix fragile computation of vsyscall address
2009-09-26 10:13:35 -07:00
Sam Ravnborg caa27b66bd kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:18:14 +02:00
Tim Abbott 1dc818c1c5 x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.
This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".

Linus suggested that we merge the ".text.head" section with ".text"
(presumably while preserving the fact that the head code starts at 0).
When I tried this it caused the kernel to not boot.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-18 10:21:49 -07:00
Linus Torvalds 0cc6d77e55 Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, e820: Guard against array overflowed in __e820_add_region()
  x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables
2009-09-14 08:01:47 -07:00
Jan Beulich fc0ce23506 x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile
The absence of vmlinux.lds here keeps .vmlinux.lds.cmd from being
included, which in turn leads to it and all its dependents always
getting rebuilt independent of whether they are already up-to-date.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A8D84670200007800010D31@vpn.id2.novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-20 16:08:58 -07:00
Akinobu Mita febe04de3b x86: fix usage of bios intcall()
Some intcall() misuses the input biosregs as output in
cf06de7b9c

This fixes the problem vga=ask boot option doesn't show enough modes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090701021307.GA3127@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-04 12:56:32 -07:00
H. Peter Anvin 2495fbf7ef x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables
There were a set of pre-Kconfig configuration variables defined in the
video code.  There is absolutely no evidence that they have been
tweaked by anybody in modern history, so just get rid of them and hope
nobody notices.  If someone does complain, these should be made real
Kconfig variables.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-26 11:02:31 -07:00
Linus Torvalds c4c5ab3089 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits)
  x86, mce: fix error path in mce_create_device()
  x86: use zalloc_cpumask_var for mce_dev_initialized
  x86: fix duplicated sysfs attribute
  x86: de-assembler-ize asm/desc.h
  i386: fix/simplify espfix stack switching, move it into assembly
  i386: fix return to 16-bit stack from NMI handler
  x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present
  x86: Remove duplicated #include's
  x86: msr.h linux/types.h is only required for __KERNEL__
  x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround
  x86, mce: mce_intel.c needs <asm/apic.h>
  x86: apic/io_apic.c: dmar_msi_type should be static
  x86, io_apic.c: Work around compiler warning
  x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present
  x86: mce: Handle banks == 0 case in K7 quirk
  x86, boot: use .code16gcc instead of .code16
  x86: correct the conversion of EFI memory types
  x86: cap iomem_resource to addressable physical memory
  x86, mce: rename _64.c files which are no longer 64-bit-specific
  x86, mce: mce.h cleanup
  ...

Manually fix up trivial conflict in arch/x86/mm/fault.c
2009-06-20 10:49:48 -07:00
Peter Oberparleiter 7bf99fb673 gcov: enable GCOV_PROFILE_ALL for x86_64
Enable gcov profiling of the entire kernel on x86_64. Required changes
include disabling profiling for:

* arch/kernel/acpi/realmode and arch/kernel/boot/compressed:
  not linked to main kernel
* arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet:
  profiling causes segfaults during boot (incompatible context)

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:58 -07:00
H. Peter Anvin 28b4868820 x86, boot: use .code16gcc instead of .code16
Use .code16gcc to compile arch/x86/boot/bioscall.S rather than
.code16, since some older versions of binutils can't generate 32-bit
addressing expressions (67 prefixes) in .code16 mode, only in
.code16gcc mode.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-16 17:47:32 -07:00
Linus Torvalds bec706838e Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: fix comment in the "glove box" code
  x86, setup: "glove box" BIOS interrupts in the video code
  x86, setup: "glove box" BIOS interrupts in the MCA code
  x86, setup: "glove box" BIOS interrupts in the EDD code
  x86, setup: "glove box" BIOS interrupts in the APM code
  x86, setup: "glove box" BIOS interrupts in the core boot code
  x86, setup: "glove box" BIOS calls -- infrastructure
2009-06-10 16:14:41 -07:00
Linus Torvalds 82782ca77d Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits)
  x86, boot: add new generated files to the appropriate .gitignore files
  x86, boot: correct the calculation of ZO_INIT_SIZE
  x86-64: align __PHYSICAL_START, remove __KERNEL_ALIGN
  x86, boot: correct sanity checks in boot/compressed/misc.c
  x86: add extension fields for bootloader type and version
  x86, defconfig: update kernel position parameters
  x86, defconfig: update to current, no material changes
  x86: make CONFIG_RELOCATABLE the default
  x86: default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN to 16 MB
  x86: document new bzImage fields
  x86, boot: make kernel_alignment adjustable; new bzImage fields
  x86, boot: remove dead code from boot/compressed/head_*.S
  x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits
  x86, boot: make symbols from the main vmlinux available
  x86, boot: determine compressed code offset at compile time
  x86, boot: use appropriate rep string for move and clear
  x86, boot: zero EFLAGS on 32 bits
  x86, boot: set up the decompression stack as early as possible
  x86, boot: straighten out ranges to copy/zero in compressed/head*.S
  x86, boot: stylistic cleanups for boot/compressed/head_64.S
  ...

Fixed trivial conflict in arch/x86/configs/x86_64_defconfig manually
2009-06-10 15:30:41 -07:00
Mike Galbraith 6799687a53 x86, boot: add new generated files to the appropriate .gitignore files
git status complains of untracked (generated) files in arch/x86/boot..

# Untracked files:
#   (use "git add <file>..." to include in what will be committed)
#
#       ../../arch/x86/boot/compressed/mkpiggy
#       ../../arch/x86/boot/compressed/piggy.S
#       ../../arch/x86/boot/compressed/vmlinux.lds
#       ../../arch/x86/boot/voffset.h
#       ../../arch/x86/boot/zoffset.h

..so adjust .gitignore files accordingly.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-02 21:13:30 -07:00
Tejun Heo 46176b4f6b x86, relocs: ignore R_386_NONE in kernel relocation entries
For relocatable 32bit kernels, boot/compressed/relocs.c processes
relocation entries in the kernel image and appends it to the kernel
image such that boot/compressed/head_32.S can relocate the kernel.
The kernel image is one statically linked object and only uses two
relocation types - R_386_PC32 and R_386_32, of the two only the latter
needs massaging during kernel relocation and thus handled by relocs.
R_386_PC32 is ignored and all other relocation types are considered
error.

When the target of a relocation resides in a discarded section,
binutils doesn't throw away the relocation record but nullifies it by
changing it to R_386_NONE, which unfortunately makes relocs fail.

The problem was triggered by yet out-of-tree x86 stack unwind patches
but given the binutils behavior, ignoring R_386_NONE is the right
thing to do.

The problem has been tracked down to binutils behavior by Jan Beulich.

[ Impact: fix build with certain binutils by ignoring R_386_NONE ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4A1B8150.40702@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-25 22:52:49 -07:00
H. Peter Anvin ee0736627d Merge branch 'x86/urgent' into x86/setup
Resolved conflicts:
	arch/x86/boot/memory.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-23 16:42:19 -07:00
H. Peter Anvin bca23dba76 x86, setup: revert ACPI 3 E820 extended attributes support
Remove ACPI 3 E820 extended memory attributes support.  At least one
vendor actively set all the flags to zero, but left ECX on return at
24.  This bug may be present in other BIOSes.

The breakage functionally means the ACPI 3 flags are probably
completely useless, and that no OS any time soon is going to rely on
their existence.  Therefore, drop support completely.  We may want to
revisit this question in the future, if we find ourselves actually
needing the flags.

This reverts all or part of the following checkins:

     cd670599b7
     c549e71d07

However, retain the part from the latter commit that copies e820 into
a temporary buffer; that is an unrelated BIOS workaround.  Put in a
comment to explain that part.

See https://bugzilla.redhat.com/show_bug.cgi?id=499396 for some
additional information.

[ Impact: detect all memory on affected machines ]

Reported-by: Thomas J. Baker <tjb@unh.edu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Len Brown <len.brown@intel.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Kyle McMartin <kmcmartin@redhat.com>
Cc: Matt Domsch <matt_domsch@dell.com>
2009-05-22 11:14:02 -07:00
H. Peter Anvin c6ac4c18fb x86, boot: correct the calculation of ZO_INIT_SIZE
Correct the calculation of ZO_INIT_SIZE (the amount of memory we need
during decompression).  One symbol (ZO_startup_32) was missing from
zoffset.h, and another (ZO_z_extract_offset) was misspelled.

[ Impact: build fix ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-20 11:26:09 -07:00
H. Peter Anvin 7ed42a28b2 x86, boot: correct sanity checks in boot/compressed/misc.c
arch/x86/boot/compressed/misc.c contains several sanity checks on the
output address.  Correct constraints that are no longer correct:

- the alignment test should be MIN_KERNEL_ALIGN on both 32 and 64
  bits.
- the 64 bit maximum address was set to 2^40, which was the limit of
  one specific x86-64 implementation.  Change the test to 2^46, the
  current Linux limit, and at least try to test the end rather than
  the beginning.
- for non-relocatable kernels, test against LOAD_PHYSICAL_ADDR on both
  32 and 64 bits.

[ Impact: fix potential boot failure due to invalid tests ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-12 11:33:08 -07:00
H. Peter Anvin 5031296c57 x86: add extension fields for bootloader type and version
A long ago, in days of yore, it all began with a god named Thor.
There were vikings and boats and some plans for a Linux kernel
header.  Unfortunately, a single 8-bit field was used for bootloader
type and version.  This has generally worked without *too* much pain,
but we're getting close to flat running out of ID fields.

Add extension fields for both type and version.  The type will be
extended if it the old field is 0xE; the version is a simple MSB
extension.

Keep /proc/sys/kernel/bootloader_type containing
(type << 4) + (ver & 0xf) for backwards compatiblity, but also add
/proc/sys/kernel/bootloader_version which contains the full version
number.

[ Impact: new feature to support more bootloaders ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 17:45:06 -07:00
H. Peter Anvin 37ba7ab5e3 x86, boot: make kernel_alignment adjustable; new bzImage fields
Make the kernel_alignment field adjustable; this allows us to set it
to a large value (intended to be 16 MB to avoid ZONE_DMA contention,
memory holes and other weirdness) while a smart bootloader can still
force a loading at a lesser alignment if absolutely necessary.

Also export pref_address (preferred loading address, corresponding to
the link-time address) and init_size, the total amount of linear
memory the kernel will require during initialization.

[ Impact: allows better kernel placement, gives bootloader more info ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 17:44:39 -07:00
H. Peter Anvin 99aa45595f x86, boot: remove dead code from boot/compressed/head_*.S
Remove a couple of lines of dead code from
arch/x86/boot/compressed/head_*.S; all of these update registers that
are dead in the current code.

[ Impact: cleanup ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 16:17:05 -07:00
H. Peter Anvin 40b387a8a9 x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits
Use LOAD_PHYSICAL_ADDR instead of CONFIG_PHYSICAL_START in the 64-bit
decompression code, for equivalence with the 32-bit code.

[ Impact: cleanup, increases code similarity ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 14:41:55 -07:00
H. Peter Anvin 77d1a49995 x86, boot: make symbols from the main vmlinux available
Make symbols from the main vmlinux, as opposed to just
compressed/vmlinux, available to header.S.  Also, export a few
additional symbols.

This will be used in a subsequent patch to export the total memory
footprint of the kernel.

[ Impact: enable future enhancement ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 14:40:50 -07:00
H. Peter Anvin 02a884c0fe x86, boot: determine compressed code offset at compile time
Determine the compressed code offset (from the kernel runtime address)
at compile time.  This allows some minor optimizations in
arch/x86/boot/compressed/head_*.S, but more importantly it makes this
value available to the build process, which will enable a future patch
to export the necessary linear memory footprint into the bzImage
header.

[ Impact: cleanup, future patch enabling ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:46:34 -07:00
H. Peter Anvin 36d3793c94 x86, boot: use appropriate rep string for move and clear
In the pre-decompression code, use the appropriate largest possible
rep movs and rep stos to move code and clear bss, respectively.  For
reverse copy, do note that the initial values are supposed to be the
address of the first (highest) copy datum, not one byte beyond the end
of the buffer.

rep strings are not necessarily the fastest way to perform these
operations on all current processors, but are likely to be in the
future, and perhaps more importantly, we want to encourage the
architecturally right thing to do here.

This also fixes a couple of trivial inefficiencies on 64 bits.

[ Impact: trivial performance enhancement, increase code similarity ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:34:52 -07:00
H. Peter Anvin 9754191278 x86, boot: zero EFLAGS on 32 bits
The 64-bit code already clears EFLAGS as soon as it has a stack.  This
seems like a reasonable precaution, so do it on 32 bits as well.

[ Impact: extra paranoia ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:19:01 -07:00
H. Peter Anvin 0a13773670 x86, boot: set up the decompression stack as early as possible
Set up the decompression stack as soon as we know where it needs to
go.  That way we have a full-service stack as soon as possible, rather
than relying on the BP_scratch field.

Note that the stack does need to be empty during bss zeroing (or
else the stack needs to be moved out of the bss segment, which is also
an option.)

[ Impact: cleanup, minor paranoia ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:18:47 -07:00
H. Peter Anvin 5b11f1cee5 x86, boot: straighten out ranges to copy/zero in compressed/head*.S
Both on 32 and 64 bits, we copy all the way up to the end of bss,
except that on 64 bits there is a hack to avoid copying on top of the
page tables.  There is no point in copying bss at all, especially
since we are just about to zero it all anyway.

To clean up and unify the handling, we now do:

  - copy from startup_32 to _bss.
  - zero from _bss to _ebss.
  - the _ebss symbol is aligned to an 8-byte boundary.
  - the page tables are moved to a separate section.

Use _bss as the copy endpoint since _edata may be misaligned.

[ Impact: cleanup, trivial performance improvement ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:18:10 -07:00
H. Peter Anvin b40d68d5b5 x86, boot: stylistic cleanups for boot/compressed/head_64.S
Clean up style issues in arch/x86/boot/compressed/head_64.S.  This
file had a lot fewer style issues than its 32-bit cousin, but the ones
it has are worth fixing, especially since it makes the two files more
similar.

[ Impact: cleanup, no object code change ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:17:32 -07:00
H. Peter Anvin 5f64ec64e7 x86, boot: stylistic cleanups for boot/compressed/head_32.S
Reformat arch/x86/boot/compressed/head_32.S to be closer to currently
preferred kernel assembly style, that is:

- opcode and operand separated by tab
- operands separated by ", "
- C-style comments

This also makes it more similar to head_64.S.

[ Impact: cleanup, no object code change ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:16:23 -07:00
H. Peter Anvin bd2a36984c x86, boot: use BP_scratch in arch/x86/boot/compressed/head_*.S
Use the BP_scratch symbol from asm-offsets.h instead of hard-coding
the location.

[ Impact: cleanup ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:16:22 -07:00
H. Peter Anvin 283ab1c0bd x86, boot: follow standard Kbuild style for compression suffix
When generating the compression suffix in
arch/x86/boot/compressed/Makefile, follow standard Kbuild
conventions, that is:

- Use a dash not underscore before y/m/n endings
- Use := whenever possible.

Requested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:16:22 -07:00
H. Peter Anvin 5f11e02019 x86, boot: simplify arch/x86/boot/compressed/Makefile
Simplify the arch/x86/boot/compressed/Makefile, by using the new
capability of specifying multiple inputs to a compressor, and the
CONFIG_X86_NEED_RELOCS Kconfig symbol.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-08 17:16:22 -07:00
H. Peter Anvin 0b4eb462da x86, boot: align the .bss section in the decompressor
Aligning the .bss section makes it trivial to use large operation
sizes for moving the initialized sections and clearing the .bss.
The alignment chosen (L1 cache) is somewhat arbitrary, but should be
large enough to avoid all known performance traps and small enough to
not cause troubles.

[ Impact: trivial performance enhancement, future patch prep	]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-08 17:16:21 -07:00
Sam Ravnborg 83c4832683 x86: boot/compressed/vmlinux.lds.S: fix build of bzImage with 64 bit compiler
Jesper reported that he saw following build issue:

 > ld:arch/x86/boot/compressed/vmlinux.lds:9: syntax error
 > make[2]: *** [arch/x86/boot/compressed/vmlinux] Error 1
 > make[1]: *** [arch/x86/boot/compressed/vmlinux] Error 2
 > make: *** [bzImage] Error 2

CPP defines the symbol "i386" to "1".
Undefine this to fix it.

[ Impact: build fix with certain tool chains ]

Reported-by: Jesper Dangaard Brouer <jdb@comx.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.0904260958190.3101@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-30 12:36:50 +02:00
Linus Torvalds 51b26ada79 x86: unify arch/x86/boot/compressed/vmlinux_*.lds
Look at the:

	diff -u arch/x86/boot/compressed/vmlinux_*.lds

output and realize that they're basially exactly the same except for
trivial naming differences, and the fact that the 64-bit version has a
"pgtable" thing.

So unify them.

There's some trivial cleanup there (make the output format a Kconfig thing
rather than doing #ifdef's for it, and unify both 32-bit and 64-bit BSS
end to "_ebss", where 32-bit used to use the traditional "_end"), but
other than that it's really very mindless and straigt conversion.

For example, I think we should aim to remove "startup_32" vs "startup_64",
and just call it "startup", and get rid of one more difference. I didn't
do that.

Also, notice the comment in the unified vmlinux.lds.S talks about
"head_64" and "startup_32" which is an odd and incorrect mix, but that was
actually what the old 64-bit only lds file had, so the confusion isn't
new, and now that mixing is arguably more accurate thanks to the
vmlinux.lds.S file being shared between the two cases ;)

[ Impact: cleanup, unification ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-27 06:35:24 +02:00
H. Peter Anvin cf9972a921 x86, setup: fix comment in the "glove box" code
Impact: Comment change only

The glove box is about avoiding problems with *registers* being
touched, not *memory*.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-11 22:24:05 -07:00
H. Peter Anvin cf06de7b9c x86, setup: "glove box" BIOS interrupts in the video code
Impact: BIOS proofing

"Glove box" off BIOS interrupts in the video code.

LKML-Reference: <49DE7F79.4030106@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
2009-04-09 16:08:12 -07:00
H. Peter Anvin 0a706db320 x86, setup: "glove box" BIOS interrupts in the MCA code
Impact: BIOS proofing

"Glove box" off BIOS interrupts in the MCA code.

LKML-Reference: <49DE7F79.4030106@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-09 16:08:11 -07:00
H. Peter Anvin 3435d3476c x86, setup: "glove box" BIOS interrupts in the EDD code
Impact: BIOS proofing

"Glove box" off BIOS interrupts in the EDD code.

LKML-Reference: <49DE7F79.4030106@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-04-09 16:08:11 -07:00
H. Peter Anvin d54ea252e4 x86, setup: "glove box" BIOS interrupts in the APM code
Impact: BIOS proofing

"Glove box" off BIOS interrupts in the APM code.

LKML-Reference: <49DE7F79.4030106@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2009-04-09 16:08:11 -07:00
H. Peter Anvin df7699c564 x86, setup: "glove box" BIOS interrupts in the core boot code
Impact: BIOS proofing

"Glove box" off BIOS interrupts in the core boot code.

LKML-Reference: <49DE7F79.4030106@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-04-09 16:08:11 -07:00
H. Peter Anvin 7a734e7dd9 x86, setup: "glove box" BIOS calls -- infrastructure
Impact: new interfaces (not yet used)

For all the platforms out there, there is an infinite number of buggy
BIOSes.  This adds infrastructure to treat BIOS interrupts more like
toxic waste and "glove box" them -- we switch out the register set,
perform the BIOS interrupt, and then restore the previous state.

LKML-Reference: <49DE7F79.4030106@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
2009-04-09 16:08:11 -07:00
H. Peter Anvin 1e274a5827 x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes
Impact: Fixes these modes on at least one system

The rewrite of the setup code into C resequenced the font setting and
register reprogramming phases of configuring nonstandard VGA modes
which use 480 scan lines in text mode.  However, there exists at least
one board (Micro-Star MS-7383 version 2.0) on which this resequencing
causes an unusable display.

Revert to the original sequencing: set up 480-line mode, install the
font, and then adjust the vertical end register appropriately.

This failure was masked by the fact that the 480-line setup was broken
until checkin 5f64135612 (therefore this
is not a -stable candidate bug fix.)

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-04-07 10:59:25 -07:00
Ingo Molnar 484cad34dd Merge branch 'dma-debug' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent 2009-04-03 16:35:09 +02:00
H. Peter Anvin 95a38f3463 x86, setup: compile with -DDISABLE_BRANCH_PROFILING
Impact: code size reduction (possibly critical)

The x86 boot and decompression code has no use of the branch profiling
constructs, so disable them.  This would bloat the setup code by as
much as 14K, eating up a fairly large chunk of the 32K area we are
guaranteed to have.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-03 16:34:45 +02:00
H. Peter Anvin cd670599b7 x86, setup: guard against pre-ACPI 3 e820 code not updating %ecx
Impact: BIOS bug safety

For pre-ACPI 3 BIOSes, pre-initialize the end of the e820 buffer just
in case the BIOS returns an unchanged %ecx but without actually
touching the ACPI 3 extended flags field.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-01 11:35:00 -07:00
H. Peter Anvin c549e71d07 x86, setup: ACPI 3, BIOS workaround for E820-probing code
Impact: ACPI 3 spec compliance, BIOS bug workaround

The ACPI 3 spec added another field to the E820 buffer -- which is
backwards incompatible, since it contains a validity bit.
Furthermore, there has been at least one report of a BIOS which
assumes that the buffer it is pointed at is the same buffer as for the
previous E820 call.  Therefore, read the data into a temporary buffer
and copy the standard part of it if and only if the valid bit is set.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-28 18:20:07 -07:00
H. Peter Anvin 32ec7fd08b x86, setup: preemptively save/restore edi and ebp around INT 15 E820
Impact: BIOS bugproofing

Since there are BIOSes known to clobber %ebx and %esi for INT 15 E820,
assume there is something out there clobbering %edi and/or %ebp too,
and don't wait for it to fail.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-28 18:18:20 -07:00