This reverts commit 3a366e614d.
Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.
Jens says:
"It's not quite clear why that is yet, so I think we should just revert
the commit for 3.9 final (which I'm assuming is pretty close).
The wifi is crap at the LSF hotel, so sending this email instead of
queueing up a revert and pull request."
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.
Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops. However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.
It can be easily reproduced with following command:
$ cd /sys/kernel/debug/tracing
$ echo 1234 | sudo tee -a set_ftrace_pid
In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().
Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On the failure path, stat->start and stat->pages will refer same page.
So it'll attempt to free the same page again and get kernel panic.
Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing control loop used by perf spits out a warning
if the called function is not a control function. This is because
the control function references a per cpu allocated data structure
on struct ftrace_ops that is not allocated for other types of
functions.
commit 0a016409e4 "ftrace: Optimize the function tracer list loop"
Had an optimization done to all function tracing loops to optimize
for a single registered ops. Unfortunately, this allows for a slight
race when tracing starts or ends, where the stub function might be
called after the current registered ops is removed. In this case we
get the following dump:
root# perf stat -e ftrace:function sleep 1
[ 74.339105] WARNING: at include/linux/ftrace.h:209 ftrace_ops_control_func+0xde/0xf0()
[ 74.349522] Hardware name: PRIMERGY RX200 S6
[ 74.357149] Modules linked in: sg igb iTCO_wdt ptp pps_core iTCO_vendor_support i7core_edac dca lpc_ich i2c_i801 coretemp edac_core crc32c_intel mfd_core ghash_clmulni_intel dm_multipath acpi_power_meter pcspk
r microcode vhost_net tun macvtap macvlan nfsd kvm_intel kvm auth_rpcgss nfs_acl lockd sunrpc uinput xfs libcrc32c sd_mod crc_t10dif sr_mod cdrom mgag200 i2c_algo_bit drm_kms_helper ttm qla2xxx mptsas ahci drm li
bahci scsi_transport_sas mptscsih libata scsi_transport_fc i2c_core mptbase scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 74.446233] Pid: 1377, comm: perf Tainted: G W 3.9.0-rc1 #1
[ 74.453458] Call Trace:
[ 74.456233] [<ffffffff81062e3f>] warn_slowpath_common+0x7f/0xc0
[ 74.462997] [<ffffffff810fbc60>] ? rcu_note_context_switch+0xa0/0xa0
[ 74.470272] [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[ 74.478117] [<ffffffff81062e9a>] warn_slowpath_null+0x1a/0x20
[ 74.484681] [<ffffffff81102ede>] ftrace_ops_control_func+0xde/0xf0
[ 74.491760] [<ffffffff8162f400>] ftrace_call+0x5/0x2f
[ 74.497511] [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[ 74.503486] [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[ 74.509500] [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[ 74.516088] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.522268] [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[ 74.528837] [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[ 74.536696] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.542878] [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[ 74.548869] [<ffffffff81105c67>] unregister_ftrace_function+0x27/0x50
[ 74.556243] [<ffffffff8111eadf>] perf_ftrace_event_register+0x9f/0x140
[ 74.563709] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.569887] [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[ 74.575898] [<ffffffff8111e94e>] perf_trace_destroy+0x2e/0x50
[ 74.582505] [<ffffffff81127ba9>] tp_perf_event_destroy+0x9/0x10
[ 74.589298] [<ffffffff811295d0>] free_event+0x70/0x1a0
[ 74.595208] [<ffffffff8112a579>] perf_event_release_kernel+0x69/0xa0
[ 74.602460] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.608667] [<ffffffff8112a640>] put_event+0x90/0xc0
[ 74.614373] [<ffffffff8112a740>] perf_release+0x10/0x20
[ 74.620367] [<ffffffff811a3044>] __fput+0xf4/0x280
[ 74.625894] [<ffffffff811a31de>] ____fput+0xe/0x10
[ 74.631387] [<ffffffff81083697>] task_work_run+0xa7/0xe0
[ 74.637452] [<ffffffff81014981>] do_notify_resume+0x71/0xb0
[ 74.643843] [<ffffffff8162fa92>] int_signal+0x12/0x17
To fix this a new ftrace_ops flag is added that denotes the ftrace_list_end
ftrace_ops stub as just that, a stub. This flag is now checked in the
control loop and the function is not called if the flag is set.
Thanks to Jovi for not just reporting the bug, but also pointing out
where the bug was in the code.
Link: http://lkml.kernel.org/r/514A8855.7090402@redhat.com
Link: http://lkml.kernel.org/r/1364377499-1900-15-git-send-email-jovi.zhangwei@huawei.com
Tested-by: WANG Chao <chaowang@redhat.com>
Reported-by: WANG Chao <chaowang@redhat.com>
Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we reenable ftrace via syctl, we currently set ftrace_trace_function
based on the previous simplistic algorithm. This is inconsistent with
what update_ftrace_function does. So better call that helper instead.
Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.com
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit 34600f0e9 "tracing: Fix race with max_tr and changing tracers"
fixed the updating of the main buffers with the race of changing
tracers, but left out the fix to the updating of just a per cpu buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/516243B7.9020405@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.
Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.
Keep the two buffers overwrite modes in sync.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.
Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().
Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().
Also fix the usage to use hlist_del_rcu() instead of hlist_del().
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.
Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.
New code is coming soon that will allow for this race to trigger.
I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf fixes from Ingo Molnar:
"Misc minor fixes mostly related to tracing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
s390: Fix a header dependencies related build error
tracing: update documentation of snapshot utility
tracing: Do not return EINVAL in snapshot when not allocated
tracing: Add help of snapshot feature when snapshot is empty
ftrace: Update the kconfig for DYNAMIC_FTRACE
To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.
To free the snapshot buffer, a '0' is written into the snapshot file.
To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.
Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.
Here's what it looked like before:
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Here's what it looks like now:
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()
Signed-off-by: James Hogan <james.hogan@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=65cR
-----END PGP SIGNATURE-----
Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull new ImgTec Meta architecture from James Hogan:
"This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of
metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()"
* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
genksyms: fix metag symbol prefix on crc symbols
metag: hugetlb: convert to vm_unmapped_area()
metag: export clear_page and copy_page
metag: export metag_code_cache_flush_all
metag: protect more non-MMU memory regions
metag: make TXPRIVEXT bits explicit
metag: kernel/setup.c: sort includes
perf: Enable building perf tools for Meta
metag: add boot time LNKGET/LNKSET check
metag: add __init to metag_cache_probe()
...
Some 32 bit architectures require 64 bit values to be aligned (for
example Meta which has 64 bit read/write instructions). These require 8
byte alignment of event data too, so use
!CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT ||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align
buffer_data_page::data accordingly.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
Pull block IO core bits from Jens Axboe:
"Below are the core block IO bits for 3.9. It was delayed a few days
since my workstation kept crashing every 2-8h after pulling it into
current -git, but turns out it is a bug in the new pstate code (divide
by zero, will report separately). In any case, it contains:
- The big cfq/blkcg update from Tejun and and Vivek.
- Additional block and writeback tracepoints from Tejun.
- Improvement of the should sort (based on queues) logic in the plug
flushing.
- _io() variants of the wait_for_completion() interface, using
io_schedule() instead of schedule() to contribute to io wait
properly.
- Various little fixes.
You'll get two trivial merge conflicts, which should be easy enough to
fix up"
Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").
* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
block: remove redundant check to bd_openers()
block: use i_size_write() in bd_set_size()
cfq: fix lock imbalance with failed allocations
drivers/block/swim3.c: fix null pointer dereference
block: don't select PERCPU_RWSEM
block: account iowait time when waiting for completion of IO request
sched: add wait_for_completion_io[_timeout]
writeback: add more tracepoints
block: add block_{touch|dirty}_buffer tracepoint
buffer: make touch_buffer() an exported function
block: add @req to bio_{front|back}_merge tracepoints
block: add missing block_bio_complete() tracepoint
block: Remove should_sort judgement when flush blk_plug
block,elevator: use new hashtable implementation
cfq-iosched: add hierarchical cfq_group statistics
cfq-iosched: collect stats from dead cfqgs
cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
block: RCU free request_queue
blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
...
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:
"enable/disable ftrace tracepoints dynamically"
This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.
Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.
Time to bring the text up to the current decade.
Cc: stable@vger.kernel.org
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from
Rafael J. Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng
with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
with contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from
Dirk Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King,
Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
Thomas Renninger, and Yasuaki Ishimatsu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=wijn
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from Rafael
J Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from Dirk
Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
Ishimatsu.
* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
PM idle: remove global declaration of pm_idle
unicore32 idle: delete stray pm_idle comment
openrisc idle: delete pm_idle
mn10300 idle: delete pm_idle
microblaze idle: delete pm_idle
m32r idle: delete pm_idle, and other dead idle code
ia64 idle: delete pm_idle
cris idle: delete idle and pm_idle
ARM64 idle: delete pm_idle
ARM idle: delete pm_idle
blackfin idle: delete pm_idle
sparc idle: rename pm_idle to sparc_idle
sh idle: rename global pm_idle to static sh_idle
x86 idle: rename global pm_idle to static x86_idle
APM idle: register apm_cpu_idle via cpuidle
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
cpufreq / intel_pstate: Change to disallow module build
tools/power turbostat: display SMI count by default
intel_idle: export both C1 and C1E
ACPI / hotplug: Fix concurrency issues and memory leaks
...
Pull scheduler changes from Ingo Molnar:
"Main changes:
- scheduler side full-dynticks (user-space execution is undisturbed
and receives no timer IRQs) preparation changes that convert the
cputime accounting code to be full-dynticks ready, from Frederic
Weisbecker.
- Initial sched.h split-up changes, by Clark Williams
- select_idle_sibling() performance improvement by Mike Galbraith:
" 1 tbench pair (worst case) in a 10 core + SMT package:
pre 15.22 MB/sec 1 procs
post 252.01 MB/sec 1 procs "
- sched_rr_get_interval() ABI fix/change. We think this detail is not
used by apps (so it's not an ABI in practice), but lets keep it
under observation.
- misc RT scheduling cleanups, optimizations"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
cputime: Remove irqsave from seqlock readers
sched, powerpc: Fix sched.h split-up build failure
cputime: Restore CPU_ACCOUNTING config defaults for PPC64
sched/rt: Move rt specific bits into new header file
sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
sched: Move sched.h sysctl bits into separate header
sched: Fix signedness bug in yield_to()
sched: Fix select_idle_sibling() bouncing cow syndrome
sched/rt: Further simplify pick_rt_task()
sched/rt: Do not account zero delta_exec in update_curr_rt()
cputime: Safely read cputime of full dynticks CPUs
kvm: Prepare to add generic guest entry/exit callbacks
cputime: Use accessors to read task cputime stats
cputime: Allow dynamic switch between tick/virtual based cputime accounting
cputime: Generic on-demand virtual cputime accounting
cputime: Move default nsecs_to_cputime() to jiffies based cputime file
cputime: Librarize per nsecs resolution cputime definitions
cputime: Avoid multiplication overflow on utime scaling
context_tracking: Export context state for generic vtime
...
Fix up conflict in kernel/context_tracking.c due to comment additions.
Pull perf changes from Ingo Molnar:
"There are lots of improvements, the biggest changes are:
Main kernel side changes:
- Improve uprobes performance by adding 'pre-filtering' support, by
Oleg Nesterov.
- Make some POWER7 events available in sysfs, equivalent to what was
done on x86, from Sukadev Bhattiprolu.
- tracing updates by Steve Rostedt - mostly misc fixes and smaller
improvements.
- Use perf/event tracing to report PCI Express advanced errors, by
Tony Luck.
- Enable northbridge performance counters on AMD family 15h, by Jacob
Shin.
- This tracing commit:
tracing: Remove the extra 4 bytes of padding in events
changes the ABI. All involved parties (PowerTop in particular)
seem to agree that it's safe to do now with the introduction of
libtraceevent, but the devil is in the details ...
Main tooling side changes:
- Add 'event group view', from Namyung Kim:
To use it, 'perf record' should group events when recording. And
then perf report parses the saved group relation from file header
and prints them together if --group option is provided. You can
use the 'perf evlist' command to see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately.
You can use --group option to enable event group view:
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles
and cycles and header line shows group information also - 'anon
group { ref-cycles, cycles }'. The output is sorted by period of
group leader first.
- Initial GTK+ annotate browser, from Namhyung Kim.
- Add option for runtime switching perf data file in perf report,
just press 's' and a menu with the valid files found in the current
directory will be presented, from Feng Tang.
- Add support to display whole group data for raw columns, from Jiri
Olsa.
- Add per processor socket count aggregation in perf stat, from
Stephane Eranian.
- Add interval printing in 'perf stat', from Stephane Eranian.
- 'perf test' improvements
- Add support for wildcards in tracepoint system name, from Jiri
Olsa.
- Add anonymous huge page recognition, from Joshua Zhu.
- perf build-id cache now can show DSOs present in a perf.data file
that are not in the cache, to integrate with build-id servers being
put in place by organizations such as Fedora.
- perf top now shares more of the evsel config/creation routines with
'record', paving the way for further integration like 'top'
snapshots, etc.
- perf top now supports DWARF callchains.
- Fix mmap limitations on 32-bit, fix from David Miller.
- 'perf bench numa mem' NUMA performance measurement suite
- ... and lots of fixes, performance improvements, cleanups and other
improvements I failed to list - see the shortlog and git log for
details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
perf/x86/amd: Enable northbridge performance counters on AMD family 15h
perf/hwbp: Fix cleanup in case of kzalloc failure
perf tools: Fix build with bison 2.3 and older.
perf tools: Limit unwind support to x86 archs
perf annotate: Make it to be able to skip unannotatable symbols
perf gtk/annotate: Fail early if it can't annotate
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Support multiple event annotation
perf ui/gtk: Implement basic GTK2 annotation browser
perf annotate: Fix warning message on a missing vmlinux
perf buildid-cache: Add --update option
uprobes/perf: Avoid uprobe_apply() whenever possible
uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
uprobes/perf: Teach trace_uprobe/perf code to pre-filter
uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
uprobes: Introduce uprobe_apply()
perf: Introduce hw_perf_event->tp_target and ->tp_list
uprobes/perf: Always increment trace_uprobe->nhit
uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
uprobes/tracing: Introduce is_trace_uprobe_enabled()
...
Commit: c1bf08ac "ftrace: Be first to run code modification on modules"
changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.
Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.
Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.
By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.
Cc: stable@vger.kernel.org
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing of ia32 compat system calls has been a bit of a pain as they
use different system call numbers than the 64bit equivalents.
I wrote a simple 'lls' program that lists files. I compiled it as a i686
ELF binary and ran it under a x86_64 box. This is the result:
echo 0 > /debug/tracing/tracing_on
echo 1 > /debug/tracing/events/syscalls/enable
echo 1 > /debug/tracing/tracing_on ; ./lls ; echo 0 > /debug/tracing/tracing_on
grep lls /debug/tracing/trace
[.. skipping calls before TS_COMPAT is set ...]
lls-1127 [005] d... 936.409188: sys_recvfrom(fd: 0, ubuf: 4d560fc4, size: 0, flags: 8048034, addr: 8, addr_len: f7700420)
lls-1127 [005] d... 936.409190: sys_recvfrom -> 0x8a77000
lls-1127 [005] d... 936.409211: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
lls-1127 [005] d... 936.409215: sys_lgetxattr -> 0xf76ff000
lls-1127 [005] d... 936.409223: sys_dup2(oldfd: 4d55ae9b, newfd: 4)
lls-1127 [005] d... 936.409228: sys_dup2 -> 0xfffffffffffffffe
lls-1127 [005] d... 936.409236: sys_newfstat(fd: 4d55b085, statbuf: 80000)
lls-1127 [005] d... 936.409242: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409243: sys_removexattr(pathname: 3, name: ffcd0060)
lls-1127 [005] d... 936.409244: sys_removexattr -> 0x0
lls-1127 [005] d... 936.409245: sys_lgetxattr(pathname: 0, name: 19614, value: 1, size: 2)
lls-1127 [005] d... 936.409248: sys_lgetxattr -> 0xf76e5000
lls-1127 [005] d... 936.409248: sys_newlstat(filename: 3, statbuf: 19614)
lls-1127 [005] d... 936.409249: sys_newlstat -> 0x0
lls-1127 [005] d... 936.409262: sys_newfstat(fd: f76fb588, statbuf: 80000)
lls-1127 [005] d... 936.409279: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409279: sys_close(fd: 3)
lls-1127 [005] d... 936.421550: sys_close -> 0x200
lls-1127 [005] d... 936.421558: sys_removexattr(pathname: 3, name: ffcd00d0)
lls-1127 [005] d... 936.421560: sys_removexattr -> 0x0
lls-1127 [005] d... 936.421569: sys_lgetxattr(pathname: 4d564000, name: 1b1abc, value: 5, size: 802)
lls-1127 [005] d... 936.421574: sys_lgetxattr -> 0x4d564000
lls-1127 [005] d... 936.421575: sys_capget(header: 4d70f000, dataptr: 1000)
lls-1127 [005] d... 936.421580: sys_capget -> 0x0
lls-1127 [005] d... 936.421580: sys_lgetxattr(pathname: 4d710000, name: 3000, value: 3, size: 812)
lls-1127 [005] d... 936.421589: sys_lgetxattr -> 0x4d710000
lls-1127 [005] d... 936.426130: sys_lgetxattr(pathname: 4d713000, name: 2abc, value: 3, size: 32)
lls-1127 [005] d... 936.426141: sys_lgetxattr -> 0x4d713000
lls-1127 [005] d... 936.426145: sys_newlstat(filename: 3, statbuf: f76ff3f0)
lls-1127 [005] d... 936.426146: sys_newlstat -> 0x0
lls-1127 [005] d... 936.431748: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
Obviously I'm not calling newfstat with a fd of 4d55b085. The calls are
obviously incorrect, and confusing.
Other efforts have been made to fix this:
https://lkml.org/lkml/2012/3/26/367
But the real solution is to rewrite the syscall internals and come up
with a fixed solution. One that doesn't require all the kluge that the
current solution has.
Thus for now, instead of outputting incorrect data, simply ignore them.
With this patch the changes now have:
#> grep lls /debug/tracing/trace
#>
Compat system calls simply are not traced. If users need compat
syscalls, then they should just use the raw syscall tracepoints.
For an architecture to make their compat syscalls ignored, it must
define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS (done in asm/ftrace.h) and also
define an arch_trace_is_compat_syscall() function that will return true
if the current task should ignore tracing the syscall.
I want to stress that this change does not affect actual syscalls in any
way, shape or form. It is only used within the tracing system and
doesn't interfere with the syscall logic at all. The changes are
consolidated nicely into trace_syscalls.c and asm/ftrace.h.
I had to make one small modification to asm/thread_info.h and that was
to remove the include of asm/ftrace.h. As asm/ftrace.h required the
current_thread_info() it was causing include hell. That include was
added back in 2008 when the function graph tracer was added:
commit caf4b323 "tracing, x86: add low level support for ftrace return tracing"
It does not need to be included there.
Link: http://lkml.kernel.org/r/1360703939.21867.99.camel@gandalf.local.home
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
uprobe_perf_open/close call the costly uprobe_apply() every time,
we can avoid it if:
- "nr_systemwide != 0" is not changed.
- There is another process/thread with the same ->mm.
- copy_proccess() does inherit_event(). dup_mmap() preserves the
inserted breakpoints.
- event->attr.enable_on_exec == T, we can rely on uprobe_mmap()
called by exec/mmap paths.
- tp_target is exiting. Only _close() checks PF_EXITING, I don't
think TRACE_REG_PERF_OPEN can hit the dying task too often.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Change uprobe_trace_func() and uprobe_perf_func() to return "int". Change
uprobe_dispatcher() to return "trace_ret | perf_ret" although this is not
needed, currently TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive.
The only functional change is that uprobe_perf_func() checks the filtering
too and returns UPROBE_HANDLER_REMOVE if nobody wants to trace current.
Testing:
# perf probe -x /lib/libc.so.6 syscall
# perf record -e probe_libc:syscall -i perl -e 'fork; syscall -1 for 1..10; wait'
# perf report --show-total-period
100.00% 10 perl libc-2.8.so [.] syscall
Before this patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 20
A child process doesn't have a counter, but still it hits this breakoint
"copied" by dup_mmap().
After the patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 11
The child process hits this int3 only once and does unapply_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Finally implement uprobe_perf_filter() which checks ->nr_systemwide or
->perf_events to figure out whether we need to insert the breakpoint.
uprobe_perf_open/close are changed to do uprobe_apply(true/false) when
the new perf event comes or goes away.
Note that currently this is very suboptimal:
- uprobe_register() called by TRACE_REG_PERF_REGISTER becomes a
heavy nop, consumer->filter() always returns F at this stage.
As it was already discussed we need uprobe_register_only() to
avoid the costly register_for_each_vma() when possible.
- uprobe_apply() is oftenly overkill. Unless "nr_systemwide != 0"
changes we need uprobe_apply_mm(), unapply_uprobe() is almost
what we need.
- uprobe_apply() can be simply avoided sometimes, see the next
changes.
Testing:
# perf probe -x /lib/libc.so.6 syscall
# perl -e 'syscall -1 while 1' &
[1] 530
# perf record -e probe_libc:syscall perl -e 'syscall -1 for 1..10; sleep 1'
# perf report --show-total-period
100.00% 10 perl libc-2.8.so [.] syscall
Before this patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 79291
A huge ->nrhit == 79291 reflects the fact that the background process
530 constantly hits this breakpoint too, even if doesn't contribute to
the output.
After the patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 10
This shows that only the target process was punished by int3.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Introduce "struct trace_uprobe_filter" which records the "active"
perf_event's attached to ftrace_event_call. For the start we simply
use list_head, we can optimize this later if needed. For example, we
do not really need to record an event with ->parent != NULL, we can
rely on parent->child_list. And we can certainly do some optimizations
for the case when 2 events have the same ->tp_target or tp_target->mm.
Change trace_uprobe_register() to process TRACE_REG_PERF_OPEN/CLOSE
and add/del this perf_event to the list.
We can probably avoid any locking, but lets start with the "obvioulsy
correct" trace_uprobe_filter->rwlock which protects everything.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Move tu->nhit++ from uprobe_trace_func() to uprobe_dispatcher().
->nhit counts how many time we hit the breakpoint inserted by this
uprobe, we do not want to loose this info if uprobe was enabled by
sys_perf_event_open().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
trace_uprobe->consumer and "struct uprobe_trace_consumer" add the
unnecessary indirection and complicate the code for no reason.
This patch simply embeds uprobe_consumer into "struct trace_uprobe",
all other changes only fix the compilation errors.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
probe_event_enable/disable() check tu->consumer != NULL to avoid the
wrong uprobe_register/unregister().
We are going to kill this pointer and "struct uprobe_trace_consumer",
so we add the new helper, is_trace_uprobe_enabled(), which can rely
on TP_FLAG_TRACE/TP_FLAG_PROFILE instead.
Note: the current logic doesn't look optimal, it is not clear why
TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably
change this later.
Also kill the unused TP_FLAG_UPROBE.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
probe_event_enable/disable() check tu->inode != NULL at the start.
This is ugly, if igrab() can fail create_trace_uprobe() should not
succeed and "postpone" the failure.
And S_ISREG(inode->i_mode) check added by d24d7dbf is not safe.
Note: alloc_uprobe() should probably check igrab() != NULL as well.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
probe_event_enable() does uprobe_register() and only after that sets
utc->tu and tu->consumer/flags. This can race with uprobe_dispatcher()
which can miss these assignments or see them out of order. Nothing
really bad can happen, but this doesn't look clean/safe.
And this does not allow to use uprobe_consumer->filter() we are going
to add, it is called by uprobe_register() and it needs utc->tu.
Change this code to initialize everything before uprobe_register(), and
reset tu->consumer/flags if it fails. We can't race with event_disable(),
the caller holds event_mutex, and if we could the code would be wrong
anyway.
In fact I think uprobe_trace_consumer should die, it buys nothing but
complicates the code. We can simply add uprobe_consumer into trace_uprobe.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
create_trace_uprobe() does kern_path() to find ->d_inode, but forgets
to do path_put(). We can do this right after igrab().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is
what consumer->handler() needs but uprobe_get_swbp_addr() is not
exported.
This also simplifies the code and makes it more consistent across
the supported architectures. handle_swbp() becomes the only caller
of uprobe_get_swbp_addr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
uprobe_consumer->filter() is pointless in its current form, kill it.
We will add it back, but with the different signature/semantics. Perhaps
we will even re-introduce the callsite in handler_chain(), but not to
just skip uc->handler().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On early boot up, when the ftrace ring buffer is initialized, the
static variable current_trace is initialized to &nop_trace.
Before this initialization, current_trace is NULL and will never
become NULL again. It is always reassigned to a ftrace tracer.
Several places check if current_trace is NULL before it uses
it, and this check is frivolous, because at the point in time
when the checks are made the only way current_trace could be
NULL is if ftrace failed its allocations at boot up, and the
paths to these locations would probably not be possible.
By initializing current_trace to &nop_trace where it is declared,
current_trace will never be NULL, and we can remove all these
checks of current_trace being NULL which never needed to be
checked in the first place.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.
Add "snapshot" debugfs file in "tracing" directory.
snapshot:
This is used to take a snapshot and to read the output of the
snapshot.
# echo 1 > snapshot
This will allocate the spare buffer for snapshot (if it is
not allocated), and take a snapshot.
# cat snapshot
This will show contents of the snapshot.
# echo 0 > snapshot
This will free the snapshot if it is allocated.
Any other positive values will clear the snapshot contents if
the snapshot is allocated, or return EINVAL if it is not allocated.
Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
Fixed irqsoff selftest and also a conflict with a change
that fixes the update_max_tr.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the trace buffer read functions use a static variable
"old_tracer" for detecting if the current tracer changes. This
was suitable for a single trace file ("trace"), but to add a
snapshot feature that will use the same function for its file,
a check against a static variable is not sufficient.
To use the output functions for two different files, instead of
storing the current tracer in a static variable, as the trace
iterator descriptor contains a pointer to the original current
tracer's name, that pointer can now be used to check if the
current tracer has changed between different reads of the trace
file.
Link: http://lkml.kernel.org/r/20121226025252.3252.9276.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For systems with an unstable sched_clock, all cpu_clock() does is enable/
disable local irq during the call to sched_clock_cpu(). And for stable
systems they are same.
trace_clock_global() already disables interrupts, so it can call
sched_clock_cpu() directly.
Link: http://lkml.kernel.org/r/1356576585-28782-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds