Commit Graph

9829 Commits

Author SHA1 Message Date
Vlastimil Babka 2516035499 mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations
After the previous patch, we can distinguish costly allocations that
should be really lightweight, such as THP page faults, with
__GFP_NORETRY.  This means we don't need to recognize khugepaged
allocations via PF_KTHREAD anymore.  We can also change THP page faults
in areas where madvise(MADV_HUGEPAGE) was used to try as hard as
khugepaged, as the process has indicated that it benefits from THP's and
is willing to pay some initial latency costs.

We can also make the flags handling less cryptic by distinguishing
GFP_TRANSHUGE_LIGHT (no reclaim at all, default mode in page fault) from
GFP_TRANSHUGE (only direct reclaim, khugepaged default).  Adding
__GFP_NORETRY or __GFP_KSWAPD_RECLAIM is done where needed.

The patch effectively changes the current GFP_TRANSHUGE users as
follows:

* get_huge_zero_page() - the zero page lifetime should be relatively
  long and it's shared by multiple users, so it's worth spending some
  effort on it.  We use GFP_TRANSHUGE, and __GFP_NORETRY is not added.
  This also restores direct reclaim to this allocation, which was
  unintentionally removed by commit e4a49efe4e7e ("mm: thp: set THP defrag
  by default to madvise and add a stall-free defrag option")

* alloc_hugepage_khugepaged_gfpmask() - this is khugepaged, so latency
  is not an issue.  So if khugepaged "defrag" is enabled (the default), do
  reclaim via GFP_TRANSHUGE without __GFP_NORETRY.  We can remove the
  PF_KTHREAD check from page alloc.

  As a side-effect, khugepaged will now no longer check if the initial
  compaction was deferred or contended.  This is OK, as khugepaged sleep
  times between collapsion attempts are long enough to prevent noticeable
  disruption, so we should allow it to spend some effort.

* migrate_misplaced_transhuge_page() - already was masking out
  __GFP_RECLAIM, so just convert to GFP_TRANSHUGE_LIGHT which is
  equivalent.

* alloc_hugepage_direct_gfpmask() - vma's with VM_HUGEPAGE (via madvise)
  are now allocating without __GFP_NORETRY.  Other vma's keep using
  __GFP_NORETRY if direct reclaim/compaction is at all allowed (by default
  it's allowed only for madvised vma's).  The rest is conversion to
  GFP_TRANSHUGE(_LIGHT).

[mhocko@suse.com: suggested GFP_TRANSHUGE_LIGHT]
Link: http://lkml.kernel.org/r/20160721073614.24395-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Arnaldo Carvalho de Melo 7c48dcfd32 perf evsel: Introduce constructor for cycles event
That is the default used when no events is specified in tools, separate
it so that simpler tools that need no evlist can use it directly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-67mwuthscwroz88x9pswcqyv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-28 18:33:20 -03:00
Arnaldo Carvalho de Melo 8149a774d5 tools lib api: Add str_error_c to libapi
Because it uses that function, which would lead every tool using it
to need to link against tools/lib/str_error_r.o.

This fixes building tools/vm/, that links with libapi.

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b31e3e3316 ("tools lib api fs: Use str_error_r()")
Link: http://lkml.kernel.org/n/tip-aedt3qzibhnhaov2j4caqi61@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-27 17:16:43 -03:00
Linus Torvalds 468fc7ed55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Unified UDP encapsulation offload methods for drivers, from
    Alexander Duyck.

 2) Make DSA binding more sane, from Andrew Lunn.

 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.

 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.

 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
    packets as soon as the device sees them, with the option to mirror
    the packet on TX via the same interface.  From Brenden Blanco and
    others.

 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.

 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.

 8) Simplify netlink conntrack entry layout, from Florian Westphal.

 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
    Schimmel, Yotam Gigi, and Jiri Pirko.

10) Add SKB array infrastructure and convert tun and macvtap over to it.
    From Michael S Tsirkin and Jason Wang.

11) Support qdisc packet injection in pktgen, from John Fastabend.

12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.

13) Add NV congestion control support to TCP, from Lawrence Brakmo.

14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.

15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.

16) Support MPLS over IPV4, from Simon Horman.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  xgene: Fix build warning with ACPI disabled.
  be2net: perform temperature query in adapter regardless of its interface state
  l2tp: Correctly return -EBADF from pppol2tp_getname.
  net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
  net: ipmr/ip6mr: update lastuse on entry change
  macsec: ensure rx_sa is set when validation is disabled
  tipc: dump monitor attributes
  tipc: add a function to get the bearer name
  tipc: get monitor threshold for the cluster
  tipc: make cluster size threshold for monitoring configurable
  tipc: introduce constants for tipc address validation
  net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
  MAINTAINERS: xgene: Add driver and documentation path
  Documentation: dtb: xgene: Add MDIO node
  dtb: xgene: Add MDIO node
  drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
  drivers: net: xgene: Use exported functions
  drivers: net: xgene: Enable MDIO driver
  drivers: net: xgene: Add backward compatibility
  drivers: net: phy: xgene: Add MDIO driver
  ...
2016-07-27 12:03:20 -07:00
Paul Gortmaker 5cada17426 objtool: Add 'fixdep' to objtool/.gitignore
To fix:

   Untracked files:
     (use "git add <file>..." to include in what will be committed)

           tools/objtool/fixdep

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a4571f6893caf737d05524cfa3829c2abc1fb240.1469452729.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-27 11:07:11 +02:00
Ingo Molnar e4b3e0694b perf/urgent fixes:
- Fix obtaining the 'start' address for a kernel module on s390, where
   .text doesn't coincides with the start of the module as reported on
   /proc/modules (Song Shan Gong)
 
 - Use official ELF e_machine value for BPF objects generated via perf + LLVM
   when specifying BPF scriptlet in 'perf record/trace --event' (Wang Nan)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXl8mHAAoJENZQFvNTUqpA0tgP/3UnRhMWLrnxSaw6bGuAdwBF
 9MPBK6YNtEQSfpK8Lr4Cbwb4GE4CdcImNx2RT0wtahffJNphfEN6B6LYZZsKIDO8
 Z9bqm94TFl8Hu1O0rd808Tg4C7rbz4aU2qECWNYC2WRFooqn4CtaKMqSlHjiqyct
 KDUdXl9VhrDPRX5WiTzCZoiZMXqX/wlppga9b3ADCxzrfzLnV4smDtiC4GfNv6Aa
 Th5qXwSR5FnyTcttpuvISj7oL2y+3ROwsRevYhuOCjebvDFmis2EWGJ1IzTR7ua/
 UWHpT7KZGVRsz2xs3sZANJdPl37VkUOXQz2+kAaVqk0lGf6/aqW2ly5BS1cEtL1C
 /mWFtBTQxANu4Wc8m2tqrLr3JYKcqtMABLlINhlOSEu+8qNilzmerybo91kXJKzj
 YFwrDd6CpGRrOFSaH7FruwwBJft6ArW8kwRSUBcf1PUdp/17oogNS12xEzb3BLyc
 vBXWHnJbsWdY32yVPPnOh/K4iTdtsCt0oJq4227/9q0Fb0M64LcVGUoQOhYhd/Wx
 gn15rHZTmMqr7Xjp/T7b5nSmYk+vS9P5Ez5+RH/qPHvG3KfNx+PrsG0Jow0EeAay
 0qAjtxaB73FhPpVGkqkxBM5cn6BsWitX9mnjnboLuLzrd+1Y3/dR7dDIEYL1HT4o
 J7NjNHVMInWk+Af2aZ8a
 =07px
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-20160726' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix obtaining the 'start' address for a kernel module on s390, where
   .text doesn't coincide with the start of the module as reported in
   /proc/modules (Song Shan Gong)

 - Use official ELF e_machine value for BPF objects generated via perf + LLVM
   when specifying BPF scriptlet in 'perf record/trace --event' (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-27 11:01:06 +02:00
Linus Torvalds 0e06f5c0de Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc bits

 - ocfs2

 - most(?) of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
  thp: fix comments of __pmd_trans_huge_lock()
  cgroup: remove unnecessary 0 check from css_from_id()
  cgroup: fix idr leak for the first cgroup root
  mm: memcontrol: fix documentation for compound parameter
  mm: memcontrol: remove BUG_ON in uncharge_list
  mm: fix build warnings in <linux/compaction.h>
  mm, thp: convert from optimistic swapin collapsing to conservative
  mm, thp: fix comment inconsistency for swapin readahead functions
  thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
  shmem: split huge pages beyond i_size under memory pressure
  thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
  khugepaged: add support of collapse for tmpfs/shmem pages
  shmem: make shmem_inode_info::lock irq-safe
  khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
  thp: extract khugepaged from mm/huge_memory.c
  shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
  shmem: add huge pages support
  shmem: get_unmapped_area align huge page
  shmem: prepare huge= mount option and sysfs knob
  mm, rmap: account shmem thp pages
  ...
2016-07-26 19:55:54 -07:00
Linus Torvalds 1cd04d293c This is the bulk of GPIO changes for the v4.8 kernel cycle.
Core changes:
 
 - The big item is of course the completion of the character
   device ABI. It has now replaced and surpassed the former
   unmaintainable sysfs ABI: we can now hammer (bitbang)
   individual lines or sets of lines and read individual lines
   or sets of lines from userspace, and we can also register
   to listen to GPIO events from userspace. As a tie-in we
   have two new tools in tools/gpio: gpio-hammer and
   gpio-event-mon that illustrate the proper use of the new
   ABI. As someone said: the wild west days of GPIO are now
   over.
 
 - Continued to remove the pointless
   ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols.
   I'm patching hexagon, openrisc, powerpc, sh, unicore,
   ia64 and microblaze. These are either ACKed by their
   maintainers or patched anyways after a grace period and
   no response from maintainers. Some archs (ARM) come in from
   their trees, and others (x86) are still not fixed, so I
   might send a second pull request to root it out later in
   this merge window, or just defer to v4.9.
 
 - The GPIO tools are moved to the tools build system.
 
 New drivers:
 
 - New driver for the MAX77620/MAX20024.
 
 - New driver for the Intel Merrifield.
 
 - Enabled PCA953x for the TI PCA9536.
 
 - Enabled PCA953x for the Intel Edison.
 
 - Enabled R8A7792 in the RCAR driver.
 
 Driver improvements:
 
 - The STMPE and F7188x now supports the .get_direction()
   callback.
 
 - The Xilinx driver supports setting multiple lines at
   once.
 
 - ACPI support for the Vulcan GPIO controller.
 
 - The MMIO GPIO driver supports device tree probing.
 
 - The Acer One 10 is supported through the _DEP ACPI
   attribute.
 
 Cleanups:
 
 - A major cleanup of the OF/DT support code. It is way
   easier to read and understand now, probably this improves
   performance too.
 
 - Drop a few redundant .owner assignments.
 
 - Remove CLPS711x boardfile support: we are 100% DT.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXlcT4AAoJEEEQszewGV1zACwQAK5SZr0F5c3QvYbJSiJBCGA7
 MZKUYHnYoBpZaPKcFKoOXEM1WOvlABlh9U0y0xkL8gQ6giyKup1wYJJCuYgW29gL
 ny4r7Z8rs2Wm1ujL+FLAwuxIwCY3BnhUucp8YiSaHPBuKRfsHorFPvXiAgLZjNYC
 Qk3Q48xYW4inw9sy2BbMfsU3CZnkvgy5euooyy1ezwachRhuHdBy/MVCG012PC4s
 0d6LGdByEx1uK4NeV7ssPys444M8unep2EWgy6Rvc1U+FmGA487EvL+X8nxTQTj3
 uTMxA8nddmZTEeEIqhpRw/dPiFlWxPFwfWmNEre05gKLb/LUK2tgsUOnmIFgVUw/
 t41IzdQNLQQZxmiXplZn6s5mAr2VNuTxkRq1CIl4SwQW+Uy4TU3q8aDPkKzsyhiR
 yw6o6ul0pQs8UZEggnht8ie6JiSnJ55ehI/nlRxpK/797Ff6Yp4FARs3ZtFnQDDu
 SWewnbRatZQ89lvy4BA7QCWeV4Scjk4k/e2HjUAFnkfMDaYqpi4vTdzwnWdVjd+F
 hMgu6VnkN3oSE7ZMrKJMh7b7h1uMnIwKBFWbkrlOEuhT1X0ZDsEOBv5juSBPYomN
 EOIJUyWqxn0ZfxeONbdbCPteYlfJF+TW/rE9LQMxS1nNwsqw2IQW6NCmrM9Nx6Fv
 FP++26nYMTSh82gwOYw3
 =NwcK
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.8 kernel cycle.  The big
  news is the completion of the chardev ABI which I'm very happy about
  and apart from that it's an ordinary, quite busy cycle.  The details
  are below.

  The patches are tested in linux-next for some time, patches to other
  subsystem mostly have ACKs.

  I got overly ambitious with configureing lines as input for IRQ lines
  but it turns out that some controllers have their interrupt-enable and
  input-enabling in orthogonal settings so the assumption that all IRQ
  lines are input lines does not hold.  Oh well, revert and back to the
  drawing board with that.

  Core changes:

   - The big item is of course the completion of the character device
     ABI.  It has now replaced and surpassed the former unmaintainable
     sysfs ABI: we can now hammer (bitbang) individual lines or sets of
     lines and read individual lines or sets of lines from userspace,
     and we can also register to listen to GPIO events from userspace.

     As a tie-in we have two new tools in tools/gpio: gpio-hammer and
     gpio-event-mon that illustrate the proper use of the new ABI.  As
     someone said: the wild west days of GPIO are now over.

   - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
     Kconfig symbols.  I'm patching hexagon, openrisc, powerpc, sh,
     unicore, ia64 and microblaze.  These are either ACKed by their
     maintainers or patched anyways after a grace period and no response
     from maintainers.

     Some archs (ARM) come in from their trees, and others (x86) are
     still not fixed, so I might send a second pull request to root it
     out later in this merge window, or just defer to v4.9.

   - The GPIO tools are moved to the tools build system.

  New drivers:

   - New driver for the MAX77620/MAX20024.

   - New driver for the Intel Merrifield.

   - Enabled PCA953x for the TI PCA9536.

   - Enabled PCA953x for the Intel Edison.

   - Enabled R8A7792 in the RCAR driver.

  Driver improvements:

   - The STMPE and F7188x now supports the .get_direction() callback.

   - The Xilinx driver supports setting multiple lines at once.

   - ACPI support for the Vulcan GPIO controller.

   - The MMIO GPIO driver supports device tree probing.

   - The Acer One 10 is supported through the _DEP ACPI attribute.

  Cleanups:

   - A major cleanup of the OF/DT support code.  It is way easier to
     read and understand now, probably this improves performance too.

   - Drop a few redundant .owner assignments.

   - Remove CLPS711x boardfile support: we are 100% DT"

* tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits)
  MAINTAINERS: Add INTEL MERRIFIELD GPIO entry
  gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()
  gpio: merrifield: Protect irq_ack() and gpio_set() by lock
  gpio: merrifield: Introduce GPIO driver to support Merrifield
  gpio: intel-mid: Make it depend to X86_INTEL_MID
  gpio: intel-mid: Sort header block alphabetically
  gpio: intel-mid: Remove potentially harmful code
  gpio: rcar: add R8A7792 support
  gpiolib: remove duplicated include from gpiolib.c
  Revert "gpio: convince line to become input in irq helper"
  gpiolib: of_find_gpio(): Don't discard errors
  gpio: of: Allow overriding the device node
  gpio: free handles in fringe cases
  gpio: tps65218: Add platform_device_id table
  gpio: max77620: get gpio value based on direction
  gpio: lynxpoint: avoid potential warning on error path
  tools/gpio: add install section
  tools/gpio: move to tools buildsystem
  gpio: intel-mid: switch to devm_gpiochip_add_data()
  gpio: 74x164: Use spi_write() helper instead of open coding
  ...
2016-07-26 19:16:01 -07:00
Linus Torvalds e663107fa1 ACPI material for v4.8-rc1
- Support for ACPI SSDT overlays allowing Secondary System
    Description Tables (SSDTs) to be loaded at any time from EFI
    variables or via configfs (Octavian Purdila, Mika Westerberg).
 
  - Support for the ACPI LPI (Low-Power Idle) feature introduced in
    ACPI 6.0 and allowing processor idle states to be represented in
    ACPI tables in a hierarchical way (with the help of Processor
    Container objects) and support for ACPI idle states management
    on ARM64, based on LPI (Sudeep Holla).
 
  - General improvements of ACPI support for NUMA and ARM64 support
    for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter).
 
  - General improvements of the ACPI table upgrade mechanism and
    ARM64 support for that feature (Aleksey Makarov, Jon Masters).
 
  - Support for the Boot Error Record Table (BERT) in APEI and
    improvements of kernel messages printed by the error injection
    code (Huang Ying, Borislav Petkov).
 
  - New driver for the Intel Broxton WhiskeyCove PMIC operation
    region and support for the REGS operation region on Broxton,
    PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker).
 
  - New driver for the power participant device which is part of the
    Dynamic Power and Thermal Framework (DPTF) and DPTF-related code
    reorganization (Srinivas Pandruvada).
 
  - Support for the platform-initiated graceful shutdown feature
    introduced in ACPI 6.1 (Prashanth Prakash).
 
  - ACPI button driver update related to lid input events generated
    automatically on initialization and system resume that have been
    problematic for some time (Lv Zheng).
 
  - ACPI EC driver cleanups (Lv Zheng).
 
  - Documentation of the ACPICA release automation process and the
    in-kernel ACPI AML debugger (Lv Zheng).
 
  - New blacklist entry and two fixes for the ACPI backlight driver
    (Alex Hung, Arvind Yadav, Ralf Gerbig).
 
  - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker).
 
  - ACPI CPPC code changes to make it more robust against possible
    defects in ACPI tables and new symbol definitions for PCC (Hoan
    Tran).
 
  - System reboot code modification to execute the ACPI _PTS (Prepare
    To Sleep) method in addition to _TTS (Ocean He).
 
  - ACPICA-related change to carry out lock ordering checks in ACPICA
    if ACPICA debug is enabled in the kernel (Lv Zheng).
 
  - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He,
    Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXl8A7AAoJEILEb/54YlRxF0kQAI6mH0yan60Osu4598+VNvgv
 wxOWl1TEbKd+LaJkofRZ+FPzZkQf5c/h/8Oo8Q3LEpFhjkARhhX7ThDjS5v2Nx6v
 I/icQ64ynPUPrw6hGNVrmec9ofZjiAs3j3Rt2bEiae+YN6guvfhWE+kBCHo2G/nN
 o4BSaxYjkphUTDSi4/5BfaocV2sl3apvwjtAj8zgGn4RD81bFFLnblynHkqJVcoN
 HAfm7QTVjT01Zkv565OSZgK8CFcD8Ky2KKKBQvcIW8zQmD6IXaoTHSYSwL0SH+oK
 bxUZUmWVfFWw4kDTAY9mw0QwtWz9ODTWh/WMhs3itWRRN5qHfogs99rCVYFtFufQ
 ODVy4wpt4wmpzZVhyUDTTigAhznPAtCam6EpL1YeNbtyrRN4evvZVFHBZJnmhosX
 zI9iLF4eqdnJZKvh+L1VFU+py8aAZpz1ZEOatNMI+xdhArbGm7v89cldzaRkJhuW
 LZr+JqYQGaOZS5qSnymwJL1KfF66+2QGpzdvzJN5FNIDACoqanATbZ/Iie2ENcM+
 WwCEWrGJFDmM30raBNNcvx0yHFtVkcNbOymla4paVg7i29nu88Ynw4Z6seIIP11C
 DryzLFhw+3jdTg2zK/te/wkhciJ0F+iZjo6VXywSMnwatf36bpdp4r4JLUVfEo2t
 8DOGKyFMLYY1zOPMK9Th
 =YwbM
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "The new feaures here are the support for ACPI overlays (allowing ACPI
  tables to be loaded at any time from EFI variables or via configfs)
  and the LPI (Low-Power Idle) support.  Also notable is the ACPI-based
  NUMA support for ARM64.

  Apart from that we have two new drivers, for the DPTF (Dynamic Power
  and Thermal Framework) power participant device and for the Intel
  Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for
  the Boot Error Record Table (BERT) in APEI and support for
  platform-initiated graceful shutdown.

  Plus two new pieces of documentation and usual assorted fixes and
  cleanups in quite a few places.

  Specifics:

   - Support for ACPI SSDT overlays allowing Secondary System
     Description Tables (SSDTs) to be loaded at any time from EFI
     variables or via configfs (Octavian Purdila, Mika Westerberg).

   - Support for the ACPI LPI (Low-Power Idle) feature introduced in
     ACPI 6.0 and allowing processor idle states to be represented in
     ACPI tables in a hierarchical way (with the help of Processor
     Container objects) and support for ACPI idle states management on
     ARM64, based on LPI (Sudeep Holla).

   - General improvements of ACPI support for NUMA and ARM64 support for
     ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter).

   - General improvements of the ACPI table upgrade mechanism and ARM64
     support for that feature (Aleksey Makarov, Jon Masters).

   - Support for the Boot Error Record Table (BERT) in APEI and
     improvements of kernel messages printed by the error injection code
     (Huang Ying, Borislav Petkov).

   - New driver for the Intel Broxton WhiskeyCove PMIC operation region
     and support for the REGS operation region on Broxton, PMIC code
     cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker).

   - New driver for the power participant device which is part of the
     Dynamic Power and Thermal Framework (DPTF) and DPTF-related code
     reorganization (Srinivas Pandruvada).

   - Support for the platform-initiated graceful shutdown feature
     introduced in ACPI 6.1 (Prashanth Prakash).

   - ACPI button driver update related to lid input events generated
     automatically on initialization and system resume that have been
     problematic for some time (Lv Zheng).

   - ACPI EC driver cleanups (Lv Zheng).

   - Documentation of the ACPICA release automation process and the
     in-kernel ACPI AML debugger (Lv Zheng).

   - New blacklist entry and two fixes for the ACPI backlight driver
     (Alex Hung, Arvind Yadav, Ralf Gerbig).

   - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker).

   - ACPI CPPC code changes to make it more robust against possible
     defects in ACPI tables and new symbol definitions for PCC (Hoan
     Tran).

   - System reboot code modification to execute the ACPI _PTS (Prepare
     To Sleep) method in addition to _TTS (Ocean He).

   - ACPICA-related change to carry out lock ordering checks in ACPICA
     if ACPICA debug is enabled in the kernel (Lv Zheng).

   - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He,
     Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)"

* tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
  ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
  arm64: add support for ACPI Low Power Idle(LPI)
  drivers: firmware: psci: initialise idle states using ACPI LPI
  cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
  arm64: cpuidle: drop __init section marker to arm_cpuidle_init
  ACPI / processor_idle: Add support for Low Power Idle(LPI) states
  ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE
  ACPI / DPTF: move int340x_thermal.c to the DPTF folder
  ACPI / DPTF: Add DPTF power participant driver
  ACPI / lpat: make it explicitly non-modular
  ACPI / dock: make dock explicitly non-modular
  ACPI / PCI: make pci_slot explicitly non-modular
  ACPI / PMIC: remove modular references from non-modular code
  ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel
  ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
  ACPI / debugger: Add AML debugger documentation
  ACPI: Add documentation describing ACPICA release automation
  ACPI: add support for loading SSDTs via configfs
  ACPI: add support for configfs
  efi / ACPI: load SSTDs from EFI variables
  ...
2016-07-26 17:56:45 -07:00
Linus Torvalds 6453dbdda3 Power management material for v4.8-rc1
- Rework the cpufreq governor interface to make it more straightforward
    and modify the conservative governor to avoid using transition
    notifications (Rafael Wysocki).
 
  - Rework the handling of frequency tables by the cpufreq core to make
    it more efficient (Viresh Kumar).
 
  - Modify the schedutil governor to reduce the number of wakeups it
    causes to occur in cases when the CPU frequency doesn't need to be
    changed (Steve Muckle, Viresh Kumar).
 
  - Fix some minor issues and clean up code in the cpufreq core and
    governors (Rafael Wysocki, Viresh Kumar).
 
  - Add Intel Broxton support to the intel_pstate driver (Srinivas
    Pandruvada).
 
  - Fix problems related to the config TDP feature and to the validity
    of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka,
    Srinivas Pandruvada).
 
  - Make intel_pstate update the cpu_frequency tracepoint even if
    the frequency doesn't change to avoid confusing powertop (Rafael
    Wysocki).
 
  - Clean up the usage of __init/__initdata in intel_pstate, mark some
    of its internal variables as __read_mostly and drop an unused
    structure element from it (Jisheng Zhang, Carsten Emde).
 
  - Clean up the usage of some duplicate MSR symbols in intel_pstate
    and turbostat (Srinivas Pandruvada).
 
  - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay
    Adiga, Viresh Kumar, Ben Dooks).
 
  - Fix a regression (introduced during the 4.5 cycle) in the
    pcc-cpufreq driver by reverting the problematic commit (Andreas
    Herrmann).
 
  - Add support for Intel Denverton to intel_idle, clean up Broxton
    support in it and make it explicitly non-modular (Jacob Pan,
    Jan Beulich, Paul Gortmaker).
 
  - Add support for Denverton and Ivy Bridge server to the Intel RAPL
    power capping driver and make it more careful about the handing
    of MSRs that may not be present (Jacob Pan, Xiaolong Wang).
 
  - Fix resume from hibernation on x86-64 by making the CPU offline
    during resume avoid using MONITOR/MWAIT in the "play dead" loop
    which may lead to an inadvertent "revival" of a "dead" CPU and
    a page fault leading to a kernel crash from it (Rafael Wysocki).
 
  - Make memory management during resume from hibernation more
    straightforward (Rafael Wysocki).
 
  - Add debug features that should help to detect problems related
    to hibernation and resume from it (Rafael Wysocki, Chen Yu).
 
  - Clean up hibernation core somewhat (Rafael Wysocki).
 
  - Prevent KASAN from instrumenting the hibernation core which leads
    to large numbers of false-positives from it (James Morse).
 
  - Prevent PM (hibernate and suspend) notifiers from being called
    during the cleanup phase if they have not been called during the
    corresponding preparation phase which is possible if one of the
    other notifiers returns an error at that time (Lianwei Wang).
 
  - Improve suspend-related debug printout in the tasks freezer and
    clean up suspend-related console handling (Roger Lu, Borislav
    Petkov).
 
  - Update the AnalyzeSuspend script in the kernel sources to
    version 4.2 (Todd Brandt).
 
  - Modify the generic power domains framework to make it handle
    system suspend/resume better (Ulf Hansson).
 
  - Make the runtime PM framework avoid resuming devices synchronously
    when user space changes the runtime PM settings for them and
    improve its error reporting (Rafael Wysocki, Linus Walleij).
 
  - Fix error paths in devfreq drivers (exynos, exynos-ppmu, exynos-bus)
    and in the core, make some devfreq code explicitly non-modular and
    change some of it into tristate (Bartlomiej Zolnierkiewicz,
    Peter Chen, Paul Gortmaker).
 
  - Add DT support to the generic PM clocks management code and make
    it export some more symbols (Jon Hunter, Paul Gortmaker).
 
  - Make the PCI PM core code slightly more robust against possible
    driver errors (Andy Shevchenko).
 
  - Make it possible to change DESTDIR and PREFIX in turbostat
    (Andy Shevchenko).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXl7/dAAoJEILEb/54YlRx+VgQAIQJOWvxKew3Yl02c/sdj9OT
 5VNnFrzGzdcAPofvvG9qGq8B0Es1vYehJpwwOB21ri8EvYv0riIiU1yrqslObojQ
 oaZOkSBpbIoKjGR4CpYA/A+feE+8EqIBdPGd+lx5a6oRdUi7tRVHBG9lyLO3FB/i
 jan1q8dMpZsmu+Y+rVVHGnCVuIlIEqr2ZnZfCwDAulO2Arp/QFAh4kH08ELATvrl
 bkPa25vq7/VMP/vCDzrfZKD5mUuKogIRu/J5wx4py1nE+FB35cKKyqBOgklLwAeY
 UI8vjDhr/myNUs54AZlktOkq47TCYvjvhX9kmOxBjuWqFbRusU012IRek1fYPRIV
 ZqbkqNX7UEVQwunAEg9AyFwyzEtOht93dQDT5RLEd4QzKuM76gmHpLeTGGMzE+nu
 FnmF9JGl4DVwqpZl9yU2+hR2Mt3bP8OF8qYmNiGUB3KO4emPslhSd+6y8liA5Bx2
 SJf0Gb//vaHCh3/uMnwAonYPqRkZvBLOMwuL1VUjNQfRMnQtDdgHMYB1aT/EglPA
 8ww6j4J8rVRLAxvYQ3UEmNA/vBNclKXblRR18+JddEZP9/oX0ATfwnCCUpr839uk
 xxyQhrm4/AI60+PHWCX4GG80YrKdOGTkF7LXCQZanVWjjuyF17rufegZ2YWLT07v
 JU1Cmumfdy2jJluT8xsR
 =uVGz
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael  Wysocki:
 "Again, the majority of changes go into the cpufreq subsystem, but
  there are no big features this time.  The cpufreq changes that stand
  out somewhat are the governor interface rework and improvements
  related to the handling of frequency tables.  Apart from those, there
  are fixes and new device/CPU IDs in drivers, cleanups and an
  improvement of the new schedutil governor.

  Next, there are some changes in the hibernation core, including a fix
  for a nasty problem related to the MONITOR/MWAIT usage by CPU offline
  during resume from hibernation, a few core improvements related to
  memory management during resume, a couple of additional debug features
  and cleanups.

  Finally, we have some fixes and cleanups in the devfreq subsystem,
  generic power domains framework improvements related to system
  suspend/resume, support for some new chips in intel_idle and in the
  power capping RAPL driver, a new version of the AnalyzeSuspend utility
  and some assorted fixes and cleanups.

  Specifics:

   - Rework the cpufreq governor interface to make it more
     straightforward and modify the conservative governor to avoid using
     transition notifications (Rafael Wysocki).

   - Rework the handling of frequency tables by the cpufreq core to make
     it more efficient (Viresh Kumar).

   - Modify the schedutil governor to reduce the number of wakeups it
     causes to occur in cases when the CPU frequency doesn't need to be
     changed (Steve Muckle, Viresh Kumar).

   - Fix some minor issues and clean up code in the cpufreq core and
     governors (Rafael Wysocki, Viresh Kumar).

   - Add Intel Broxton support to the intel_pstate driver (Srinivas
     Pandruvada).

   - Fix problems related to the config TDP feature and to the validity
     of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka,
     Srinivas Pandruvada).

   - Make intel_pstate update the cpu_frequency tracepoint even if the
     frequency doesn't change to avoid confusing powertop (Rafael
     Wysocki).

   - Clean up the usage of __init/__initdata in intel_pstate, mark some
     of its internal variables as __read_mostly and drop an unused
     structure element from it (Jisheng Zhang, Carsten Emde).

   - Clean up the usage of some duplicate MSR symbols in intel_pstate
     and turbostat (Srinivas Pandruvada).

   - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay
     Adiga, Viresh Kumar, Ben Dooks).

   - Fix a regression (introduced during the 4.5 cycle) in the
     pcc-cpufreq driver by reverting the problematic commit (Andreas
     Herrmann).

   - Add support for Intel Denverton to intel_idle, clean up Broxton
     support in it and make it explicitly non-modular (Jacob Pan, Jan
     Beulich, Paul Gortmaker).

   - Add support for Denverton and Ivy Bridge server to the Intel RAPL
     power capping driver and make it more careful about the handing of
     MSRs that may not be present (Jacob Pan, Xiaolong Wang).

   - Fix resume from hibernation on x86-64 by making the CPU offline
     during resume avoid using MONITOR/MWAIT in the "play dead" loop
     which may lead to an inadvertent "revival" of a "dead" CPU and a
     page fault leading to a kernel crash from it (Rafael Wysocki).

   - Make memory management during resume from hibernation more
     straightforward (Rafael Wysocki).

   - Add debug features that should help to detect problems related to
     hibernation and resume from it (Rafael Wysocki, Chen Yu).

   - Clean up hibernation core somewhat (Rafael Wysocki).

   - Prevent KASAN from instrumenting the hibernation core which leads
     to large numbers of false-positives from it (James Morse).

   - Prevent PM (hibernate and suspend) notifiers from being called
     during the cleanup phase if they have not been called during the
     corresponding preparation phase which is possible if one of the
     other notifiers returns an error at that time (Lianwei Wang).

   - Improve suspend-related debug printout in the tasks freezer and
     clean up suspend-related console handling (Roger Lu, Borislav
     Petkov).

   - Update the AnalyzeSuspend script in the kernel sources to version
     4.2 (Todd Brandt).

   - Modify the generic power domains framework to make it handle system
     suspend/resume better (Ulf Hansson).

   - Make the runtime PM framework avoid resuming devices synchronously
     when user space changes the runtime PM settings for them and
     improve its error reporting (Rafael Wysocki, Linus Walleij).

   - Fix error paths in devfreq drivers (exynos, exynos-ppmu,
     exynos-bus) and in the core, make some devfreq code explicitly
     non-modular and change some of it into tristate (Bartlomiej
     Zolnierkiewicz, Peter Chen, Paul Gortmaker).

   - Add DT support to the generic PM clocks management code and make it
     export some more symbols (Jon Hunter, Paul Gortmaker).

   - Make the PCI PM core code slightly more robust against possible
     driver errors (Andy Shevchenko).

   - Make it possible to change DESTDIR and PREFIX in turbostat (Andy
     Shevchenko)"

* tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
  Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency"
  PM / hibernate: Introduce test_resume mode for hibernation
  cpufreq: export cpufreq_driver_resolve_freq()
  cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index()
  PCI / PM: check all fields in pci_set_platform_pm()
  cpufreq: acpi-cpufreq: use cached frequency mapping when possible
  cpufreq: schedutil: map raw required frequency to driver frequency
  cpufreq: add cpufreq_driver_resolve_freq()
  cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT
  intel_pstate: Update cpu_frequency tracepoint every time
  cpufreq: intel_pstate: clean remnant struct element
  PM / tools: scripts: AnalyzeSuspend v4.2
  x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
  cpufreq: powernv: Replacing pstate_id with frequency table index
  intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()
  PM / hibernate: Image data protection during restoration
  PM / hibernate: Add missing braces in __register_nosave_region()
  PM / hibernate: Clean up comments in snapshot.c
  PM / hibernate: Clean up function headers in snapshot.c
  PM / hibernate: Add missing braces in hibernate_setup()
  ...
2016-07-26 17:29:07 -07:00
Joonsoo Kim 371376750f tools/vm/page_owner: increase temporary buffer size
Page owner will be changed to store more deep stacktrace so current
temporary buffer size isn't enough.  Increase it.

Link: http://lkml.kernel.org/r/1464230275-25791-5-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Song Shan Gong 203d8a4aa6 perf s390: Fix 'start' address of module's map
At present, when creating module's map, perf gets 'start' address by
parsing '/proc/modules', but it's the module base address, it isn't the
start address of the '.text' section.

In most arches, it's OK. But for s390, it places 'GOT' and 'PLT'
relocations before '.text' section. So there exists an offset between
module base address and '.text' section, which will incur wrong symbol
resolution for modules.

Fix this bug by getting 'start' address of module's map from parsing
'/sys/module/[module name]/sections/.text', not from '/proc/modules'.

Signed-off-by: Song Shan Gong <gongss@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1469070651-6447-2-git-send-email-gongss@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-26 16:46:12 -03:00
Linus Torvalds 37e13a1ebe Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "This tree contains tooling fixes plus some additions:

   - fixes to the vdso2c build environment that Stephen Rothwell is
     using for the linux-next build (Arnaldo Carvalho de Melo)

   - AVX-512 instruction mappings (Adrian Hunter)

   - misc fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf tools: event.h needs asm/perf_regs.h"
  x86: Make the vdso2c compiler use the host architecture headers
  tools build: Fix objtool build with ARCH=x86_64
  objtool: Always use host headers
  objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH
  tools build: Add HOSTARCH Makefile variable
  perf tests kmod-path: Fix build on ubuntu:16.04-x-armhf
  perf tools: Add AVX-512 instructions to the new instructions test
  perf tools: Add AVX-512 support to the instruction decoder used by Intel PT
  x86/insn: Add AVX-512 support to the instruction decoder
  x86/insn: perf tools: Fix vcvtph2ps instruction decoding
2016-07-26 10:26:29 -07:00
Shuah Khan d78388dbec selftests: media_tests add a new video device test
Add a new video device test that opens user specified Video Device and
calls video ioctls in a loop once every 10 seconds.

This test is intended for testing device removal and driver unbind while
an ioctl is active. Clean device removal and driver unbind is expected
without any use-after-free and panics.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-07-26 09:59:30 -06:00
Wang Nan 9b16137ab0 tools lib bpf: Use official ELF e_machine value
New LLVM will issue newly assigned EM_BPF machine code. The new code
will be propagated to glibc and libelf.

This patch introduces the new machine code to libbpf.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468821668-60088-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-26 10:08:53 -03:00
Cyril Bur a431b946db selftests/powerpc: exec() with suspended transaction
Perform an exec() class syscall with a suspended transaction.

This is a test for the bug we fixed in 8e96a87c54 ("powerpc/tm: Always
reclaim in start_thread() for exec() class syscalls").

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Fix build errors, use a single binary for the test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-26 14:28:22 +10:00
Linus Torvalds 0f657262d5 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
 "Various x86 low level modifications:

   - preparatory work to support virtually mapped kernel stacks (Andy
     Lutomirski)

   - support for 64-bit __get_user() on 32-bit kernels (Benjamin
     LaHaise)

   - (involved) workaround for Knights Landing CPU erratum (Dave Hansen)

   - MPX enhancements (Dave Hansen)

   - mremap() extension to allow remapping of the special VDSO vma, for
     purposes of user level context save/restore (Dmitry Safonov)

   - hweight and entry code cleanups (Borislav Petkov)

   - bitops code generation optimizations and cleanups with modern GCC
     (H. Peter Anvin)

   - syscall entry code optimizations (Paolo Bonzini)"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  x86/mm/cpa: Add missing comment in populate_pdg()
  x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs
  x86/syscalls: Add compat_sys_preadv64v2/compat_sys_pwritev64v2
  x86/smp: Remove unnecessary initialization of thread_info::cpu
  x86/smp: Remove stack_smp_processor_id()
  x86/uaccess: Move thread_info::addr_limit to thread_struct
  x86/dumpstack: Rename thread_struct::sig_on_uaccess_error to sig_on_uaccess_err
  x86/uaccess: Move thread_info::uaccess_err and thread_info::sig_on_uaccess_err to thread_struct
  x86/dumpstack: When OOPSing, rewind the stack before do_exit()
  x86/mm/64: In vmalloc_fault(), use CR3 instead of current->active_mm
  x86/dumpstack/64: Handle faults when printing the "Stack: " part of an OOPS
  x86/dumpstack: Try harder to get a call trace on stack overflow
  x86/mm: Remove kernel_unmap_pages_in_pgd() and efi_cleanup_page_tables()
  x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated
  x86/mm/hotplug: Don't remove PGD entries in remove_pagetable()
  x86/mm: Use pte_none() to test for empty PTE
  x86/mm: Disallow running with 32-bit PTEs to work around erratum
  x86/mm: Ignore A/D bits in pte/pmd/pud_none()
  x86/mm: Move swap offset/type up in PTE to work around erratum
  x86/entry: Inline enter_from_user_mode()
  ...
2016-07-25 15:34:18 -07:00
Linus Torvalds 7e4dc77b28 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "With over 300 commits it's been a busy cycle - with most of the work
  concentrated on the tooling side (as it should).

  The main kernel side enhancements were:

   - Add per event callchain limit: Recently we introduced a sysctl to
     tune the max-stack for all events for which callchains were
     requested:

       $ sysctl kernel.perf_event_max_stack
       kernel.perf_event_max_stack = 127

     Now this patch introduces a way to configure this per event, i.e.
     this becomes possible:

       $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

     allowing finer tuning of how much buffer space callchains use.

     This uses an u16 from the reserved space at the end, leaving
     another u16 for future use.

     There has been interest in even finer tuning, namely to control the
     max stack for kernel and userspace callchains separately.  Further
     discussion is needed, we may for instance use the remaining u16 for
     that and when it is present, assume that the sample_max_stack
     introduced in this patch applies for the kernel, and the u16 left
     is used for limiting the userspace callchain (Arnaldo Carvalho de
     Melo)

   - Optimize AUX event (hardware assisted side-band event) delivery
     (Kan Liang)

   - Rework Intel family name macro usage (this is partially x86 arch
     work) (Dave Hansen)

   - Refine and fix Intel LBR support (David Carrillo-Cisneros)

   - Add support for Intel 'TopDown' events (Andi Kleen)

   - Intel uncore PMU driver fixes and enhancements (Kan Liang)

   - ... other misc changes.

  Here's an incomplete list of the tooling enhancements (but there's
  much more, see the shortlog and the git log for details):

   - Support cross unwinding, i.e.  collecting '--call-graph dwarf'
     perf.data files in one machine and then doing analysis in another
     machine of a different hardware architecture.  This enables, for
     instance, to do:

       $ perf record -a --call-graph dwarf

     on a x86-32 or aarch64 system and then do 'perf report' on it on a
     x86_64 workstation (He Kuang)

   - Allow reading from a backward ring buffer (one setup via
     sys_perf_event_open() with perf_event_attr.write_backward = 1)
     (Wang Nan)

   - Finish merging initial SDT (Statically Defined Traces) support, see
     cset comments for details about how it all works (Masami Hiramatsu)

   - Support attaching eBPF programs to tracepoints (Wang Nan)

   - Add demangling of symbols in programs written in the Rust language
     (David Tolnay)

   - Add support for tracepoints in the python binding, including an
     example, that sets up and parses sched:sched_switch events,
     tools/perf/python/tracepoint.py (Jiri Olsa)

   - Introduce --stdio-color to set up the color output mode selection
     in 'annotate' and 'report', allowing emit color escape sequences
     when redirecting the output of these tools (Arnaldo Carvalho de
     Melo)

   - Add 'callindent' option to 'perf script -F', to indent the Intel PT
     call stack, making this output more ftrace-like (Adrian Hunter,
     Andi Kleen)

   - Allow dumping the object files generated by llvm when processing
     eBPF scriptlet events (Wang Nan)

   - Add stackcollapse.py script to help generating flame graphs (Paolo
     Bonzini)

   - Add --ldlat option to 'perf mem' to specify load latency for loads
     event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

   - Tooling support for Intel TopDown counters, recently added to the
     kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
  perf tests: Add is_printable_array test
  perf tools: Make is_printable_array global
  perf script python: Fix string vs byte array resolving
  perf probe: Warn unmatched function filter correctly
  perf cpu_map: Add more helpers
  perf stat: Balance opening and reading events
  tools: Copy linux/{hash,poison}.h and check for drift
  perf tools: Remove include/linux/list.h from perf's MANIFEST
  tools: Copy the bitops files accessed from the kernel and check for drift
  Remove: kernel unistd*h files from perf's MANIFEST, not used
  perf tools: Remove tools/perf/util/include/linux/const.h
  perf tools: Remove tools/perf/util/include/asm/byteorder.h
  perf tools: Add missing linux/compiler.h include to perf-sys.h
  perf jit: Remove some no-op error handling
  perf jit: Add missing curly braces
  objtool: Initialize variable to silence old compiler
  objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
  perf record: Add --tail-synthesize option
  perf session: Don't warn about out of order event if write_backward is used
  perf tools: Enable overwrite settings
  ...
2016-07-25 13:20:41 -07:00
Linus Torvalds df00ccca72 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - documentation updates

   - miscellaneous fixes

   - minor reorganization of code

   - torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  rcu: Correctly handle sparse possible cpus
  rcu: sysctl: Panic on RCU Stall
  rcu: Fix a typo in a comment
  rcu: Make call_rcu_tasks() tolerate first call with irqs disabled
  rcu: Disable TASKS_RCU for usermode Linux
  rcu: No ordering for rcu_assign_pointer() of NULL
  rcutorture: Fix error return code in rcu_perf_init()
  torture: Inflict default jitter
  rcuperf: Don't treat gp_exp mis-setting as a WARN
  rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments
  rcutorture: Don't specify the cpu type of QEMU on PPC
  rcutorture: Make -soundhw a x86 specific option
  rcutorture: Use vmlinux as the fallback kernel image
  rcutorture/doc: Create initrd using dracut
  torture: Stop onoff task if there is only one cpu
  torture: Add starvation events to error summary
  torture:  Break online and offline functions out of torture_onoff()
  torture: Forgive lengthy trace dumps and preemption
  torture: Remove CONFIG_RCU_TORTURE_TEST_RUNNABLE, simplify code
  torture: Simplify code, eliminate RCU_PERF_TEST_RUNNABLE
  ...
2016-07-25 12:04:11 -07:00
Arnaldo Carvalho de Melo 4e3ba8af21 Revert "perf tools: event.h needs asm/perf_regs.h"
This reverts commit e083a21fca.

Not needed at all, tools/perf/util/perf_regs.h, included via:

  #include "perf_regs.h"

Should have a definition for PERF_REGS_MAX, and since this is dependent
on HAVE_PERF_REGS_SUPPORT, fixes the build on powerpc, noticed by trying
to cross compile this from ubuntu16.04 with a locally build libz &
elfutils pair, since those are not available in multilib packages.

Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-0bv204s71t4wuw1l53b6fz79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-25 11:58:56 -03:00
Rafael J. Wysocki bc841e260c Merge branch 'pm-cpu'
* pm-cpu:
  x86: remove duplicate turbo ratio limit MSRs
  tools/power turbostat: Replace MSR_NHM_TURBO_RATIO_LIMIT
  cpufreq: intel_pstate: Replace MSR_NHM_TURBO_RATIO_LIMIT
2016-07-25 13:46:30 +02:00
Rafael J. Wysocki 7f234a4d8a Merge branches 'pm-sleep' and 'pm-tools'
* pm-sleep:
  PM / hibernate: Introduce test_resume mode for hibernation
  x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
  PM / hibernate: Image data protection during restoration
  PM / hibernate: Add missing braces in __register_nosave_region()
  PM / hibernate: Clean up comments in snapshot.c
  PM / hibernate: Clean up function headers in snapshot.c
  PM / hibernate: Add missing braces in hibernate_setup()
  PM / hibernate: Recycle safe pages after image restoration
  PM / hibernate: Simplify mark_unsafe_pages()
  PM / hibernate: Do not free preallocated safe pages during image restore
  PM / suspend: show workqueue state in suspend flow
  PM / sleep: make PM notifiers called symmetrically
  PM / sleep: Make pm_prepare_console() return void
  PM / Hibernate: Don't let kasan instrument snapshot.c

* pm-tools:
  PM / tools: scripts: AnalyzeSuspend v4.2
  tools/turbostat: allow user to alter DESTDIR and PREFIX
2016-07-25 13:44:32 +02:00
Rafael J. Wysocki 54d0b14ad7 Merge branches 'acpi-drivers', 'acpi-misc' and 'acpi-tools'
* acpi-drivers:
  ACPI / DPTF: move int340x_thermal.c to the DPTF folder
  ACPI / DPTF: Add DPTF power participant driver

* acpi-misc:
  ACPI / lpat: make it explicitly non-modular
  ACPI / dock: make dock explicitly non-modular

* acpi-tools:
  tools/acpi: use CROSS_COMPILE to define prefix
2016-07-25 13:43:03 +02:00
Linus Torvalds 25a0dc4be8 Staging / IIO driver update for 4.8-rc1
Here is the big Staging and IIO driver update for 4.8-rc1.
 
 We ended up adding more code than removing, again, but it's not all that
 bad.  Lots of cleanups all over the staging tree, and new IIO drivers,
 full details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iFYEABECABYFAleVPQQPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsplRgAniG6
 jfPnvlHhl70T5HsGJzrc7VS9AKCBQ5x0gzTNxo2nnGfPmR8CVEH7Bg==
 =0/6X
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big Staging and IIO driver update for 4.8-rc1.

  We ended up adding more code than removing, again, but it's not all
  that bad.  Lots of cleanups all over the staging tree, and new IIO
  drivers, full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
  drivers:iio:accel:mma8452: removed unwanted return statements
  drivers:iio:accel:mma8452: added cleanup provision in case of failure.
  iio: Add iio.git tree to MAINTAINERS
  iio:st_pressure: clean useless static channel initializers
  iio:st_pressure:lps22hb: temperature support
  iio:st_pressure:lps22hb: open drain support
  iio:st_pressure: temperature triggered buffering
  iio:st_pressure: document sampling gains
  iio:st_pressure: align storagebits on power of 2
  iio:st_sensors: align on storagebits boundaries
  staging:iio:lis3l02dq drop separate driver
  iio: accel: st_accel: Add lis3l02dq support
  iio: adc: add missing of_node references to iio_dev
  iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
  iio: potentiometer: Fix typo in Kconfig
  iio: potentiometer: mcp4531: Add device tree binding
  iio: potentiometer: mcp4531: Add device tree binding documentation
  iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
  iio:imu:mpu6050: icm20608 initial support
  iio: adc: max1363: Add device tree binding
  ...
2016-07-24 16:55:23 -07:00
Dan Williams 0606263f24 Merge branch 'for-4.8/libnvdimm' into libnvdimm-for-next 2016-07-24 08:05:44 -07:00
Vishal Verma 6839a6d96f nfit: do an ARS scrub on hitting a latent media error
When a latent (unknown to 'badblocks') error is encountered, it will
trigger a machine check exception. On a system with machine check
recovery, this will only SIGBUS the process(es) which had the bad page
mapped (as opposed to a kernel panic on platforms without machine
check recovery features). In the former case, we want to trigger a full
rescan of that nvdimm bus. This will allow any additional, new errors
to be captured in the block devices' badblocks lists, and offending
operations on them can be trapped early, avoiding machine checks.

This is done by registering a callback function with the
x86_mce_decoder_chain and calling the new ars_rescan functionality with
the address in the mce notificatiion.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-24 08:04:04 -07:00
Dan Williams bdf97013ce nfit: move to nfit/ sub-directory
With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file.  Prepare for this by moving all
nfit source to drivers/acpi/nfit/.  This is pure code movement, no
functional changes.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-24 08:04:04 -07:00
David S. Miller de0ba9a0d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just several instances of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24 00:53:32 -04:00
Dan Williams fd1d961dd6 x86/insn: remove pcommit
The pcommit instruction is being deprecated in favor of either ADR
(asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or
posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM
Firmware Interface Table).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23 11:04:23 -07:00
Dan Carpenter 2d6a4d6481 tools/vm/slabinfo: fix an unintentional printf
The curly braces are missing here so we print stuff unintentionally.

Fixes: 9da4714a2d ('slub: slabinfo update for cmpxchg handling')
Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23 10:25:54 +09:00
Dan Carpenter b301aac5ad testing/radix-tree: fix a macro expansion bug
There are no parentheses around this macro and it causes a problem when
we do:

	index = rand() % THRASH_SIZE;

Link: http://lkml.kernel.org/r/20160715210953.GC19522@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23 10:25:54 +09:00
Dan Williams 58cd71b474 nfit, tools/testing/nvdimm/: unify shutdown paths
While testing the new on-demand ARS patches we discovered that
differences between the nfit_test and normal nfit driver shutdown paths
can leak resources.  Unify the shutdown paths to trigger via a devm_
callback when the acpi_desc->dev is unbound from its driver.

Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-22 13:35:54 -07:00
Josh Poimboeuf 60cbdf5d05 tools build: Fix objtool build with ARCH=x86_64
The objtool build fails in a cross-compiled environment on a non-x86
host with "ARCH=x86_64":

  tools/objtool/objtool-in.o: In function `decode_instructions':
  tools/objtool/builtin-check.c:276: undefined reference to `arch_decode_instruction'

We could override the ARCH environment variable and change it back to
x86, similar to what the objtool Makefile was doing before; but it's
tricky to override environment variables consistently.

Instead, take a similar approach used by the Linux top-level Makefile
and introduce a SRCARCH Makefile variable which evaluates to "x86" when
ARCH is either "x86_64" or "x86".

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160722191920.ej62fnspnqurbaa7@treble
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:37:44 -03:00
Arnaldo Carvalho de Melo 0cf6eb603b objtool: Always use host headers
From a conversation with Josh:

From http://lkml.kernel.org/r/20160722034118.guckaniobf3f7czc@treble :

It needs to be compiled with the host (powerpc) compiler, but then it
needs to disassemble target (x86) files.

 ----

So use HOSTARCH instead of ARCH.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160722034118.guckaniobf3f7czc@treble
Link: http://lkml.kernel.org/n/tip-le1m1yzxnfpt3msbblu40nm8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:28:46 -03:00
Arnaldo Carvalho de Melo 630e7a2904 objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH
objtool's Makefile was setting up ARCH but fixing up just the x86_64 ->
x86, using Makefile.arch will do the necessary fixups for all arches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hbq0bbh03u2b722vozcyql31@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:28:25 -03:00
Arnaldo Carvalho de Melo 0a943cb10c tools build: Add HOSTARCH Makefile variable
For tools that needs to be always compiled with the host headers.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-907q32k2nep6q670dkxypmu6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:25:45 -03:00
Arnaldo Carvalho de Melo e5e6312b5b perf tests kmod-path: Fix build on ubuntu:16.04-x-armhf
Cross building it on Ubuntu 16.04 to ARM ends up showing we get
the free() prototype by luck in other environments, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ktfgmmyhcfw8ondka2013f3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:25:44 -03:00
Dan Williams bc9775d869 libnvdimm: move ->module to struct nvdimm_bus_descriptor
Let the provider module be explicitly passed in rather than implicitly
assumed by the module that calls nvdimm_bus_register().  This is in
preparation for unifying the nfit and nfit_test driver teardown paths.

Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21 20:03:19 -07:00
Dan Williams e7a11b449e nfit: cleanup acpi_nfit_init calling convention
Pass the nfit buffer as a parameter rather than hanging it off of
acpi_desc.

Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21 14:12:18 -07:00
Dan Williams 5dc68e5574 tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
New for ACPI 6.1, these fields are used in the common dimm
representation format defined by section 5.2.25.9 "NVDIMM representation
format".

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21 14:12:18 -07:00
Dan Williams 7bfe97c763 tools/testing/nvdimm: add virtual ramdisk range
Test the virtual disk ranges that platform firmware like EDK2/OVMF might
emit.

Tested-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-21 14:12:18 -07:00
Adrian Hunter 6c4d0b41ce perf tools: Add AVX-512 instructions to the new instructions test
Previous patches added support for Intel's AVX-512 instructions to the
kernel and perf tools instruction decoders.

AVX-512 instructions are documented in Intel Architecture Instruction
Set Extensions Programming Reference (February 2016).

Add a representative set of instructions to perf's "new instructions"
test. e.g.

	perf test "new instructions"

Or to view a particular instruction:

	perf test -v "new instructions" 2>&1 | grep vbroadcasti64x4

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-21 09:37:26 -03:00
Adrian Hunter c61f4d5eba perf tools: Add AVX-512 support to the instruction decoder used by Intel PT
Add support for Intel's AVX-512 instructions to perf tools instruction
decoder used by Intel PT.  The kernel's instruction decoder was updated in
a previous patch.

AVX-512 instructions are documented in Intel Architecture Instruction Set
Extensions Programming Reference (February 2016).

AVX-512 instructions are identified by a EVEX prefix which, for the purpose
of instruction decoding, can be treated as though it were a 4-byte VEX
prefix.

Existing instructions which can now accept an EVEX prefix need not be
further annotated in the op code map (x86-opcode-map.txt). In the case of
new instructions, the op code map is updated accordingly.

Also add associated Mask Instructions that are used to manipulate mask
registers used in AVX-512 instructions.

A representative set of instructions is added to the perf tools new
instructions test in a subsequent patch.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-21 09:37:18 -03:00
Adrian Hunter 6f6ef07f41 x86/insn: perf tools: Fix vcvtph2ps instruction decoding
vcvtph2ps does not have an immediate operand, so remove the erroneous
'Ib' from its opcode map entry. Add vcvtph2ps to the perf tools new
instructions test to verify it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-20 09:57:46 -03:00
Jiri Olsa 988dd774dc perf tests: Add is_printable_array test
Add automated test for is_printable_array function.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 19:50:35 -03:00
Jiri Olsa accaed2659 perf tools: Make is_printable_array global
It's used from 2 objects in perf, so it's better to keep just one copy.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 19:49:47 -03:00
Jiri Olsa 249de6e074 perf script python: Fix string vs byte array resolving
Jirka reported that python code returns all arrays as strings.  This
makes impossible to get all items for byte array tracepoint field
containing 0x00 value item.

Fixing this by scanning full length of the array and returning it as
PyByteArray object in case non printable byte is found.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-and-Tested-by: Jiri Pirko <jiri@mellanox.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 19:48:04 -03:00
Masami Hiramatsu e70493429b perf probe: Warn unmatched function filter correctly
Warn unmatched function filter correctly instead of warning
"symbol-loading error", since that can be a filter issue.

From the technical point of view, this adds a filter chech in map__load
and if there is a filter, it returns -2 (filter-out), instead of -1
(error), and perf-probe checks it and change message.

E.g. without this fix:

  # perf probe -F rt_sp*
  no symbols found in [kernel.kallsyms], maybe install a debug package?
  Failed to load symbols in kernel

With this fix:

  # perf probe -F rt_sp*
  no symbols passed the given filter.
  Failed to find symbols matched to "rt_sp*"
    Error: Failed to show functions.

Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146885835596.16106.2293540792775552481.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 19:46:34 -03:00
Mark Rutland 9a6c582d57 perf cpu_map: Add more helpers
In some cases it's necessry to figure out the map-local index of a given
Linux logical CPU ID. Add a new helper, cpu_map__idx, to acquire this.
As the logic is largely the same as the existing cpu_map__has, this is
rewritten in terms of the new helper.

At the same time, add the inverse operation, cpu_map__cpu, which yields
the logical CPU id for a map-local index. While this can be performed
manually, wrapping this in a helper can make code more legible.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1468577293-19667-3-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 19:42:47 -03:00
Mark Rutland 00e727bb38 perf stat: Balance opening and reading events
In create_perf_stat_counter, when a target CPU has not been provided, we
call __perf_evsel__open with empty_cpu_map, and open a single FD per
thread. However, in read_counter we assume that we opened events for the
product of threads and CPUs described in the evsel's cpu_map.

Thus, if an evsel has a cpu_map with more than one entry, we will
attempt to access FDs that we didn't open. This could result in a number
of problems (e.g. blocking while reading from STDIN if the fd memory
happened to be initialised to zero).

This is problematic for systems were a logical CPU PMU covers some
arbitrary subset of CPUs. The cpu_map of any evsel for that PMU will be
initialised based on the cpumask exposed through sysfs, even if the user
requests per-thread events.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1468577293-19667-2-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 19:41:14 -03:00
Arnaldo Carvalho de Melo ae3c14a028 tools: Copy linux/{hash,poison}.h and check for drift
We were also using this directly from the kernel sources, the two last
cases, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7o14xvacqcjc5llc7gvjjyl8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 18:41:50 -03:00
Arnaldo Carvalho de Melo 3aa0042769 perf tools: Remove include/linux/list.h from perf's MANIFEST
It hasn't been used since we made tools/ self sufficiente wrt list.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: d1b39d41eb ("tools: Make list.h self-sufficient")
Link: http://lkml.kernel.org/n/tip-w20ueqlf22kh7ctjqo0zjpig@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 18:35:11 -03:00
Arnaldo Carvalho de Melo de1e17b1d0 tools: Copy the bitops files accessed from the kernel and check for drift
copy some more kernel files accessed from tools/, check for drift.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-omz8xdyvvxgjiuqzwj6ecm6j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 18:33:41 -03:00
Arnaldo Carvalho de Melo ad430729ae Remove: kernel unistd*h files from perf's MANIFEST, not used
No need to copy it to a detached tarball as they aren't used anymore

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lopmaqi439ke10g1j9cxrxwt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 18:14:44 -03:00
Arnaldo Carvalho de Melo e0643c4e9f perf tools: Remove tools/perf/util/include/linux/const.h
Not used anymore, remove one more file referencing kernel sources, i.e.
outside of tools/

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ykfjt3t8l0npxfwmekiwwyu6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 17:53:22 -03:00
Arnaldo Carvalho de Melo 7e3f364113 perf tools: Remove tools/perf/util/include/asm/byteorder.h
Not used anymore. This also stops include linux/swab.h directly
from the kernel sources, remove that reference from the MANIFEST.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 17:52:42 -03:00
Arnaldo Carvalho de Melo 14f0652b4f perf tools: Add missing linux/compiler.h include to perf-sys.h
It uses the likely/unlikely macros, so need to include
<linux/compiler.h>.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-p0xrhgbkicsii9ohmhhprqpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 17:40:49 -03:00
Dan Carpenter 9fcfcdf3c7 perf jit: Remove some no-op error handling
The 'info.e_machine' struct member is an uint16_t so 'm' is never less
than zero.  It looks like this was maybe left over code from earlier
versions so I've just removed it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20160715210836.GB19522@mwanda
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 12:20:00 -03:00
Dan Carpenter e03141db36 perf jit: Add missing curly braces
It doesn't change the runtime behavior, but my static checker complains
that curly braces were intended.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20160715210712.GA19522@mwanda
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-18 12:20:00 -03:00
Arnaldo Carvalho de Melo b49364f36c objtool: Initialize variable to silence old compiler
gcc version 4.1.2 20080704 (Red Hat 4.1.2-55) barfs with:

    CC       /tmp/build/objtool/builtin-check.o
  cc1: warnings being treated as errors
  builtin-check.c: In function 'cmd_check':
  builtin-check.c:667: warning: 'prev_rela' may be used uninitialized in this function
  mv: cannot stat `/tmp/build/objtool/.builtin-check.o.tmp': No such file or directory
  make[1]: *** [/tmp/build/objtool/builtin-check.o] Error 1

Init it to NULL to silence it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qolo31rl2ojlwj1lj9dhemyz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:32:52 -03:00
Arnaldo Carvalho de Melo 4a0982f941 objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
So that it can find asm/bitsperlong.h to get the __BITS_PER_LONG
definition.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pr3pvskh65pey4po7t122z4j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:29:20 -03:00
Wang Nan 4ea648aec0 perf record: Add --tail-synthesize option
When working with overwritable ring buffer there's a inconvenience
problem: if perf dumps data after a long period after it starts,
non-sample events may lost, which makes following 'perf report' unable
to identify proc name and mmap layout. For example:

 # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \
        dd if=/dev/zero of=/dev/null

send SIGUSR2 after dd runs long enough. The resuling perf.data lost
correct comm and mmap events:

 # perf script -i perf.data.2016061522374354
 perf 24478 [004] 2581325.601789:  raw_syscalls:sys_exit: NR 0 = 512
 ^^^^
 Should be 'dd'
                   27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux)
                   203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux)
                   b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux)
             7f47c417edf0 [unknown] ([unknown])
             ^^^^^^^^^^^^
             Fail to unwind

This patch provides a '--tail-synthesize' option, allows perf to collect
system status when finalizing output file. In resuling output file, the
non-sample events reflect system status when dumping data.

After this patch:
 # perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \
        dd if=/dev/zero of=/dev/null

 # perf script -i perf.data.2016061600544998
 dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ...
 ^^
 Correct comm
                   203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms])
                   203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms])
                   203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms])
                   b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
                    d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so)
                    ^^^^^
                    Correct unwind

This option doesn't aim to solve this problem completely. If a process
terminates before SIGUSR2, we still lost its COMM and MMAP events. For
example, we can't unwind correctly from the final perf.data we get from
the previous example, because when perf collects the final output file
(when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap'
becomes empty.

However, this is a cheaper choice. To completely solve this problem we
need to continously output non-sample events. To satisify the
requirement of daemonization, we need to merge them periodically. It is
possible but requires much more code and cycles.

Automatically select --tail-synthesize when --overwrite is provided.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:52 -03:00
Wang Nan f06149c0db perf session: Don't warn about out of order event if write_backward is used
If write_backward attribute is set, records are written into kernel
ring buffer from end to beginning, but read from beginning to end.
To avoid 'XX out of order events recorded' warning message (timestamps
of records is in reverse order when using write_backward), suppress the
warning message if write_backward is selected by at lease one event.

Result:

Before this patch:
  # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \
                     -e raw_syscalls:sys_enter \
                     dd if=/dev/zero of=/dev/null count=300
  300+0 records in
  300+0 records out
  153600 bytes (154 kB) copied, 0.000601617 s, 255 MB/s
  [ perf record: Woken up 5 times to write data ]
  Warning:
  40 out of order events recorded.
  [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ]

After this patch:
  # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \
                     -e raw_syscalls:sys_enter \
                     dd if=/dev/zero of=/dev/null count=300
  300+0 records in
  300+0 records out
  153600 bytes (154 kB) copied, 0.000644873 s, 238 MB/s
  [ perf record: Woken up 5 times to write data ]
  [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ]

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-15-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:51 -03:00
Wang Nan 626a6b784e perf tools: Enable overwrite settings
This patch allows following config terms and option:

Globally setting events to overwrite;

  # perf record --overwrite ...

Set specific events to be overwrite or no-overwrite.

  # perf record --event cycles/overwrite/ ...
  # perf record --event cycles/no-overwrite/ ...

Add missing config terms and update the config term array size because
the longest string length has changed.

For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.

Test result:

  # perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
  # perf evlist -v
  syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:51 -03:00
Wang Nan f6cdff8329 perf evlist: Make {pause,resume} internal helpers
There's no user of these two function outside evlist.c. Remove them from
public namespace.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-13-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:50 -03:00
Wang Nan 057374645b perf record: Read from overwritable ring buffer
Drive the evlist->bkw_mmap_state state machine during draining and when
SIGUSR2 is received. Read the backward ring buffer in record__mmap_read_all.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-12-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:50 -03:00
Wang Nan 54cc54decd perf evlist: Setup backward mmap state machine
Introduce a bkw_mmap_state state machine to evlist:

                     .________________(forbid)_____________.
                     |                                     V
 NOTREADY --(0)--> RUNNING --(1)--> DATA_PENDING --(2)--> EMPTY
                     ^  ^              |   ^               |
                     |  |__(forbid)____/   |___(forbid)___/|
                     |                                     |
                      \_________________(3)_______________/

 NOTREADY     : Backward ring buffers are not ready
 RUNNING      : Backward ring buffers are recording
 DATA_PENDING : We are required to collect data from backward ring buffers
 EMPTY        : We have collected data from backward ring buffers.

 (0): Setup backward ring buffer
 (1): Pause ring buffers for reading
 (2): Read from ring buffers
 (3): Resume ring buffers for recording

We can't avoid this complexity. Since we deliberately drop records from
overwritable ring buffer, there's no way for us to check remaining from
ring buffer itself (by checking head and old pointers). Therefore, we
need DATA_PENDING and EMPTY state to help us recording what we have done
to the ring buffer.

In record__mmap_read_evlist(), drive this state machine from DATA_PENDING
to EMPTY.

In perf_evlist__mmap_per_evsel(), drive this state machine from NOTREADY
to RUNNING when creating backward mmap.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:49 -03:00
Wang Nan a0c6f451f9 perf evlist: Drop evlist->backward
Now there's no real user of evlist->backward. Drop it. We are going to
use evlist->backward_mmap as a container for backward ring buffer.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:49 -03:00
Wang Nan 078c33862e perf evlist: Map backward events to backward_mmap
In perf_evlist__mmap_per_evsel(), select backward_mmap for backward
events.  Utilize new perf_mmap APIs. Dynamically alloc backward_mmap.

Remove useless functions.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:48 -03:00
Wang Nan b2cb615d8a perf evlist: Introduce backward_mmap array for evlist
Add backward_mmap to evlist, free it together with normal mmap.

Improve perf_evlist__pick_pc(), search backward_mmap if evlist->mmap is
not available.

This patch doesn't alloc this array. It will be allocated conditionally
in the following commits.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:48 -03:00
Wang Nan a1f7261834 perf evlist: Extract common code in mmap failure processing
In perf_evlist__mmap_per_cpu() and perf_evlist__mmap_per_thread(), in
case of mmap failure, successfully created maps should be cleared.

Current code uses two loops calling __perf_evlist__munmap() for each
function.

This patch extracts common code to perf_evlist__munmap_nofree() and use
previous introduced decoupled API perf_mmap__munmap(). Now
__perf_evlist__munmap() can be removed because of no user.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:47 -03:00
Wang Nan 4876075b32 perf evlist: Record mmap cookie into fdarray private field
Insetad of saving a index into fdarray entries private field, save the
corresponding 'struct perf_mmap' pointer, and release them directly
using perf_mmap__put().

Following commits introduce multiple mmap arrays to evlist. Without this
patch, perf_evlist__munmap_filtered() is unable to retrive correct
'struct perf_mmap' pointer.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:47 -03:00
Wang Nan a4ea0ec4f2 perf record: Decouple record__mmap_read() and evlist.
Perf evlist will have multiple mmap arrays. Update record__mmap_read():
it should read from 'struct perf_mmap' directly.

Also, make record__mmap_read() ready to read from backward ring buffer.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:46 -03:00
Wang Nan 8db6d6b19e perf evlist: Update mmap related APIs and helpers
Currently, the evlist mmap related helpers and APIs accept evlist and
idx, and dereference 'struct perf_mmap' by evlist->mmap[idx]. This is
unnecessary, and force each evlist contains only one mmap array.

Following commits are going to introduce multiple mmap arrays to a
evlist.  This patch refators these APIs and helpers, introduces
functions accept perf_mmap pointer directly. New helpers and APIs are
decoupled with perf_evlist, and become perf_mmap functions (so they have
perf_mmap prefix).

Old functions are reimplemented with new functions. Some of them will be
removed in following commits.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:46 -03:00
Wang Nan 2b43834706 tools lib fd array: Allow associating a pointer cookie with each entry
Add a 'ptr' field to fdarray->priv array.

This feature will be used by following commits, which introduce
muiltiple 'struct perf_mmap' arrays for different types of mapping.

Because of this, during fdarray__filter(), a simple 'idx' is not enough.

Add a pointer cookie that allows to directly associate a 'struct
perf_mmap' pointer to an fdarray entry.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:27:46 -03:00
Peter Zijlstra e81fcd4372 tools: Simplify BITS_PER_LONG define
Do it using (__CHAR_BIT__ * __SIZEOF_LONG__), simpler, works everywhere,
reduces the complexity by ditching CONFIG_64BIT, that was being
synthesized from yet another set of defines, which proved fragile,
breaking the build on linux-next for no obvious reasons.

Committer Note:

Except on:

gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)

Fallback to __WORDSIZE in that case...

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160715072243.GP30154@twins.programming.kicks-ass.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:26:41 -03:00
Arnaldo Carvalho de Melo 32a951b4fd perf evlist: Drop redundant evsel->overwrite indicator
evsel->overwrite indicator means an event should be put into
overwritable ring buffer. In current implementation, it equals to
evsel->attr.write_backward. To reduce compliexity, remove
evsel->overwrite, use evsel->attr.write_backward instead.

In addition, in __perf_evsel__open(), if kernel doesn't support
write_backward and user explicitly set it in evsel, don't fallback
like other missing feature, since it is meaningless to fall back to
a forward ring buffer in this case: we are unable to stably read
from an forward overwritable ring buffer.

Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 13:38:06 -03:00
Jiri Olsa db49120a32 tools lib api fs: Use base 0 in filename__read_ull
By using 0 for base, the strtoull() detects the base automatically (see
'man strtoull').

ATM we have just one user of this function, the cpu__get_max_freq
function reading the "cpuinfo_max_freq" sysfs file. It should not get
affected by this change.

Committer note:

This change seems motivated by this discussion:

"[PATCH] [RFC V1]s390/perf: fix 'start' address of module's map"
http://lkml.kernel.org/r/20160711120155.GA29929@krava

I.e. this patches paves the way for filename__read_ull() to be used in a
S/390 related fix.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Songshan Gong <gongss@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1468567797-27564-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 13:38:05 -03:00
Arnaldo Carvalho de Melo 0d203166de perf tools: Bail out at "--sort dcacheline" and cacheline_size not known
There are cases where further work would be needed to overcome the fact
that neither sysconf(_SC_LEVEL1_DCACHE_LINESIZE) nor
/sys/devices/system/cpu/cpu0/cache/index0/coherency_line_size are
available in some systems (Android, for instance), so bail out when such
a situation takes place.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ho8d8g8mh0o2dri7ckcccafi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 10:08:43 -03:00
Arnaldo Carvalho de Melo 8811e8ea14 perf tools: Just pr_debug() about not being able to read cacheline_size
So far the cacheline_size is only useful for the "dcacheline" --sort
order, i.e. if that is not used, which is the norm, then the user
shouldn't care that he is running this, say, on an Android system where
sysconf(_SC_LEVEL1_DCACHE_LINESIZE) and the
/sys/devices/system/cpu/cpu0/cache/index0/coherency_line_size sysfs file
isn't available.

An upcoming patch will emit an warning only for "--sort ...,dcacheline,...".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-580cnkvftunyvt9n7unsholi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 10:08:29 -03:00
Ingo Molnar 38452af242 Merge branch 'x86/asm' into x86/mm, to resolve conflicts
Conflicts:
	tools/testing/selftests/x86/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-15 10:26:04 +02:00
Arnaldo Carvalho de Melo 8c98abff43 tools: Make "__always_inline" just "inline" on Android
As the gcc there is producing tons of:

  "warning: always_inline function might not be inlinable"

At least on android-ndk-r12/platforms/android-24/arch-arm, so, for the
time being, use this big hammer.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-97l3eg3fnk5shmo4rsyyvj2t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 12:03:04 -03:00
Arnaldo Carvalho de Melo 09dd39d2d2 perf tools: Do not provide dup sched_getcpu() prototype on Android
The Bionic libc has this definition, so don't duplicate it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rmd19832zkt07e4crdzyen9z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 12:02:04 -03:00
Arnaldo Carvalho de Melo ca575ad209 tools lib traceevent: Add correct header for ipv6 definitions
We need to include netinet/in.h to get the in6_addr struct definition, needed to
build it on the Android NDK:

  In file included from event-parse.c:36:0:
  /home/acme/android/android-ndk-r12/platforms/android-24/arch-arm/usr/include/netinet/ip6.h:82:18: error: field 'ip6_src' has incomplete type
    struct in6_addr ip6_src; /* source address */

And it is the canonical way of getting IPv6 definitions, as described,
for instance, in Linux's 'man ipv6'

Doing that uncovers another problem: this source file uses PRIu64 but
doesn't include it, depending on it being included by chance via the now
replaced header (netinet/ip6.h), fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tilr31n3yaba1whsd47qlwa3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:33:32 -03:00
Michael Ellerman 24af8c5a52 selftests/powerpc: Add a test for PROT_SAO
PROT_SAO is a powerpc-specific flag to mmap(), and we rely on arch
specific logic to allow it to be passed to mmap().

Add a small test to ensure mmap() accepts PROT_SAO. We don't have a good
way to test that it actually causes the mapping to be created with the
right flags, so for now we just touch the mapping so it's faulted in. In
future we might be able to do something better.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 20:26:25 +10:00
Masami Hiramatsu 8e5dc84835 perf test: Add a test case for SDT event
Add a basic test case for SDT event support.  This test scans an SDT
event in perftools and check whether the SDT event is correctly stored
into the buildid cache.

Here is an example:

  ----
  $ perf test sdt -v
  47: Test SDT event probing                                   :
  --- start ---
  test child forked, pid 20732
  Found 72 SDTs in /home/mhiramat/ksrc/linux/tools/perf/perf
  Writing cache: %sdt_perf:test_target=test_target
  Cache committed: 0
  symbol:test_target file:(null) line:0 offset:0 return:0 lazy:(null)
  test child finished with 0
  ---- end ----
  Test SDT event probing: Ok
  ----

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831796546.17065.1502584370844087537.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:10 -03:00
Masami Hiramatsu e26e63be64 perf build: Add sdt feature detection
This checks whether sys/sdt.h is available or not, which is required for
DTRACE_PROBE().

We can disable this feature by passing NO_SDT=1 when building.

This flag will be used for SDT test case and further SDT events in
perftools.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831795615.17065.17513820540591053933.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:09 -03:00
Masami Hiramatsu 7e9fca51fb perf probe: Support a special SDT probe format
Support a special SDT probe format which can omit the '%' prefix only if
the SDT group name starts with "sdt_". So, for example both of
"%sdt_libc:setjump" and "sdt_libc:setjump" are acceptable for perf probe
--add.

E.g. without this:

  # perf probe -a sdt_libc:setjmp
  Semantic error :There is non-digit char in line number.
  ...

With this:

  # perf probe -a sdt_libc:setjmp
  Added new event:
    sdt_libc:setjmp      (on %setjmp in /usr/lib64/libc-2.20.so)

  You can now use it in all perf tools, such as:

  	perf record -e sdt_libc:setjmp -aR sleep 1

Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831794674.17065.13359473252168740430.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:09 -03:00
Masami Hiramatsu a598180aa1 perf probe: Support @BUILDID or @FILE suffix for SDT events
Support @BUILDID or @FILE suffix for SDT events. This allows perf to add
probes on SDTs/pre-cached events on given FILE or the file which has
given BUILDID (also, this complements BUILDID.)

For example, both gcc and libstdc++ has same SDTs as below.  If you
would like to add a probe on sdt_libstdcxx:catch on gcc, you can do as
below.

  ----
  # perf list sdt | tail -n 6
    sdt_libstdcxx:catch@/usr/bin/gcc(0cc207fc4b27)     [SDT event]
    sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
    sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27)   [SDT event]
    sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
    sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27)     [SDT event]
    sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
  # perf probe -a %sdt_libstdcxx:catch@0cc
  Added new event:
    sdt_libstdcxx:catch  (on %catch in /usr/bin/gcc)

  You can now use it in all perf tools, such as:

  	perf record -e sdt_libstdcxx:catch -aR sleep 1
  ----

Committer note:

Doing the full sequence of steps to get the results above:

With a clean build-id cache:

  [root@jouet ~]# rm -rf ~/.debug/
  [root@jouet ~]# perf list sdt

  List of pre-defined events (to be used in -e):

  [root@jouet ~]#

No events whatsoever, then, we can add all events in gcc to the build-id
cache, doing a --add + --dry-run:

  [root@jouet ~]# perf probe --dry-run --cache -x /usr/bin/gcc --add %sdt_libstdcxx:\*
  Added new events:
    sdt_libstdcxx:throw  (on %* in /usr/bin/gcc)
    sdt_libstdcxx:rethrow (on %* in /usr/bin/gcc)
    sdt_libstdcxx:catch  (on %* in /usr/bin/gcc)

  You can now use it in all perf tools, such as:

	perf record -e sdt_libstdcxx:catch -aR sleep 1

  [root@jouet ~]#

It really didn't add any events, it just cached them:

  [root@jouet ~]# perf probe -l
  [root@jouet ~]#

We can see that it was cached as:

  [root@jouet ~]# ls -la ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/
  total 976
  drwxr-xr-x. 2 root root   4096 Jul 13 21:47 .
  drwxr-xr-x. 3 root root   4096 Jul 13 21:47 ..
  -rwxr-xr-x. 4 root root 985912 Jun 22 18:52 elf
  -rw-r--r--. 1 root root    303 Jul 13 21:47 probes
  [root@jouet ~]# file ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/elf
  /root/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/elf: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2, stripped
  [root@jouet ~]# cat ~/.debug/usr/bin/gcc/9a0730e2bcc6d2a2003d21ac46807e8ee6bcb7c2/probes
  %sdt_libstdcxx:throw=throw
  p:sdt_libstdcxx/throw /usr/bin/gcc:0x71ffd
  %sdt_libstdcxx:rethrow=rethrow
  p:sdt_libstdcxx/rethrow /usr/bin/gcc:0x720b8
  %sdt_libstdcxx:catch=catch
  p:sdt_libstdcxx/catch /usr/bin/gcc:0x7307f
  %sdt_libgcc:unwind=unwind
  p:sdt_libgcc/unwind /usr/bin/gcc:0x7eec0
  #sdt_libstdcxx:*=%*
  [root@jouet ~]#

Ok, now we can use 'perf probe' to refer to those cached entries as:

  Humm, nope, doing as above we end up with:

  [root@jouet ~]# perf probe -a %sdt_libstdcxx:catch
  Semantic error :* is bad for event name -it must follow C symbol-naming rule.
    Error: Failed to add events.
  [root@jouet ~]#

But it worked at some point, lets try not using --dry-run:

Resetting everything:

  # rm -rf ~/.debug/
  # perf probe -d *:*
  # perf probe -l
  # perf list sdt

    List of pre-defined events (to be used in -e):

  #

Ok, now it cached everything, even things we haven't asked it to
(sdt_libgcc:unwind):

  [root@jouet ~]# perf probe -x /usr/bin/gcc --add %sdt_libstdcxx:\*
  Added new events:
    sdt_libstdcxx:throw  (on %* in /usr/bin/gcc)
    sdt_libstdcxx:rethrow (on %* in /usr/bin/gcc)
    sdt_libstdcxx:catch  (on %* in /usr/bin/gcc)

  You can now use it in all perf tools, such as:

	perf record -e sdt_libstdcxx:catch -aR sleep 1

  [root@jouet ~]# perf list sdt

  List of pre-defined events (to be used in -e):

    sdt_libgcc:unwind                                  [SDT event]
    sdt_libstdcxx:catch                                [SDT event]
    sdt_libstdcxx:rethrow                              [SDT event]
    sdt_libstdcxx:throw                                [SDT event]
  [root@jouet ~]#

And we have the events in place:

  [root@jouet ~]# perf probe -l
    sdt_libstdcxx:catch  (on execute_cfa_program+1551@../../../libgcc/unwind-dw2.c in /usr/bin/gcc)
    sdt_libstdcxx:rethrow (on d_print_subexpr+280@libsupc++/cp-demangle.c in /usr/bin/gcc)
    sdt_libstdcxx:throw  (on d_print_subexpr+93@libsupc++/cp-demangle.c in /usr/bin/gcc)
  [root@jouet ~]#

And trying to use them at least has 'perf trace --event sdt*:*' working.

Then, if we try to add the ones in libstdc++:

  [root@jouet ~]# perf probe -x /usr/lib64/libstdc++.so.6 -a %sdt_libstdcxx:\*
  Error: event "catch" already exists.
   Hint: Remove existing event by 'perf probe -d'
         or force duplicates by 'perf probe -f'
         or set 'force=yes' in BPF source.
    Error: Failed to add events.
  [root@jouet ~]#

Doesn't work, dups, but at least this served to, unbeknownst to the user, add
the SDT probes in /usr/lib64/libstdc++.so.6!

  [root@jouet ~]# perf list sdt

  List of pre-defined events (to be used in -e):

    sdt_libgcc:unwind                                  [SDT event]
    sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6)     [SDT event]
    sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
    sdt_libstdcxx:rethrow@/usr/bin/gcc(9a0730e2bcc6)   [SDT event]
    sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
    sdt_libstdcxx:throw@/usr/bin/gcc(9a0730e2bcc6)     [SDT event]
    sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
  [root@jouet ~]#

Now we should be able to get to the original cset comment, if we remove all
SDTs events in place, not from the cache, from the kernel, where it was set up as:

  [root@jouet ~]# ls -la /sys/kernel/debug/tracing/events/sdt_libstdcxx/
  total 0
  drwxr-xr-x.  5 root root 0 Jul 13 22:00 .
  drwxr-xr-x. 80 root root 0 Jul 13 21:56 ..
  drwxr-xr-x.  2 root root 0 Jul 13 22:00 catch
  -rw-r--r--.  1 root root 0 Jul 13 22:00 enable
  -rw-r--r--.  1 root root 0 Jul 13 22:00 filter
  drwxr-xr-x.  2 root root 0 Jul 13 22:00 rethrow
  drwxr-xr-x.  2 root root 0 Jul 13 22:00 throw
  [root@jouet ~]#

  [root@jouet ~]# head -2 /sys/kernel/debug/tracing/events/sdt_libstdcxx/throw/format
  name: throw
  ID: 2059
  [root@jouet ~]#

Now to remove it:

  [root@jouet ~]# perf probe -d sdt_libstdc*:*
  Removed event: sdt_libstdcxx:catch
  Removed event: sdt_libstdcxx:rethrow
  Removed event: sdt_libstdcxx:throw
  [root@jouet ~]#

Which caused:

  [root@jouet ~]# ls -la /sys/kernel/debug/tracing/events/sdt_libstdcxx/
  ls: cannot access '/sys/kernel/debug/tracing/events/sdt_libstdcxx/': No such file or directory
  [root@jouet ~]#

Ok, now we can do:

  [root@jouet ~]# perf list sdt_libstdcxx:catch

  List of pre-defined events (to be used in -e):

    sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6)     [SDT event]
    sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
  [root@jouet ~]#

So, these are not really 'pre-defined events', i.e. we can't use them with
'perf record --event':

  [root@jouet ~]# perf record --event sdt_libstdcxx:catch*
  event syntax error: 'sdt_libstdcxx:catch*'
                       \___ unknown tracepoint

  Error:	File /sys/kernel/debug/tracing/events/sdt_libstdcxx/catch* not found.
  Hint:	Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
<SNIP>
  [root@jouet ~]#

To have it really pre-defined we must use perf probe to get its definition from
the cache and set it up in the kernel, creating the tracepoint to _then_ use it
with 'perf record --event':

  [root@jouet ~]# perf probe -a sdt_libstdcxx:catch
  Semantic error :There is non-digit char in line number.
  <SNIP>

Oops, there is another gotcha here, we need that pesky '%' character:

  [root@jouet ~]# perf probe -a %sdt_libstdcxx:catch
  Added new events:
    sdt_libstdcxx:catch  (on %catch in /usr/bin/gcc)
    sdt_libstdcxx:catch_1 (on %catch in /usr/lib64/libstdc++.so.6.0.22)

  You can now use it in all perf tools, such as:

	perf record -e sdt_libstdcxx:catch_1 -aR sleep 1

  [root@jouet ~]#

But then we added _two_ events, one with the name we expected, the other one
with a _ added, when doing the analysis we need to pay attention to who maps to
who.

And here is where we get to the point of this patch, which is to be able to
disambiguate those definitions for 'catch' in the build-id cache, but first we need
remove those events we just added:

[root@jouet ~]# perf probe -d %sdt_libstdcxx:catch

Oops, that didn't remove anything, we need to _remove_ that % char in this case:

  [root@jouet ~]# perf probe -d sdt_libstdcxx:catch
  Removed event: sdt_libstdcxx:catch

And we need to remove the other event added, i.e. I forgot to add a * at the end:

  [root@jouet ~]# perf probe -d sdt_libstdcxx:catch*
  Removed event: sdt_libstdcxx:catch_1
  [root@jouet ~]#

Ok, disambiguating it using what is in this patch:

  [root@jouet ~]# perf list sdt_libstdcxx:catch

  List of pre-defined events (to be used in -e):

    sdt_libstdcxx:catch@/usr/bin/gcc(9a0730e2bcc6)     [SDT event]
    sdt_libstdcxx:catch@/usr/lib64/libstdc++.so.6.0.22(ef2b7066559a) [SDT event]
  [root@jouet ~]#
  [root@jouet ~]# perf probe -a %sdt_libstdcxx:catch@9a07
  Added new event:
    sdt_libstdcxx:catch  (on %catch in /usr/bin/gcc)

  You can now use it in all perf tools, such as:

	perf record -e sdt_libstdcxx:catch -aR sleep 1

  [root@jouet ~]# perf probe -l
    sdt_libstdcxx:catch  (on execute_cfa_program+1551@../../../libgcc/unwind-dw2.c in /usr/bin/gcc)
  [root@jouet ~]#

Yeah, it works! But we need to try and simplify this :-)

Update: Some aspects of this simplification take place in the following
        patches.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831793746.17065.13065062753978236612.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:08 -03:00
Masami Hiramatsu 40218daea1 perf list: Show SDT and pre-cached events
Show SDT and pre-cached events by perf-list with "sdt". This also shows
the binary and build-id where the events are placed only when there are
same name events on different binaries.

e.g.:

  # perf list sdt

  List of pre-defined events (to be used in -e):

    sdt_libc:lll_futex_wake                            [SDT event]
    sdt_libc:lll_lock_wait_private                     [SDT event]
    sdt_libc:longjmp                                   [SDT event]
    sdt_libc:longjmp_target                            [SDT event]
  ...
    sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27)   [SDT event]
    sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
    sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27)     [SDT event]
    sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)

The binary path and build-id are shown in below format;

  <GROUP>:<EVENT>@<PATH>(<BUILD-ID>)

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160624090646.25421.44225.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:07 -03:00
Masami Hiramatsu 1de7b8bf72 perf probe: Search SDT/cached event from all probe caches
Search SDT/cached event from all probe caches if user doesn't pass any
binary. With this, we don't have to specify target binary for SDT and
named cached events (which start with %).

E.g. without this, a target binary must be passed with -x.

  # perf probe -x /usr/lib64/libc-2.20.so -a %sdt_libc:\*

With this change, we don't need it anymore.

  # perf probe -a %sdt_libc:\*

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831792812.17065.2353705982669445313.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:07 -03:00
Masami Hiramatsu 42bba263eb perf probe: Allow wildcard for cached events
Allo glob wildcard for reusing cached/SDT events. E.g.

  # perf probe -x /usr/lib64/libc-2.20.so -a %sdt_libc:\*

This example adds probes for all SDT in libc.
Note that the SDTs must have been scanned by perf buildid-cache.

Committer note:

Using it to check what of those SDT probes would take place when doing
a cargo run (rust):

  # trace --no-sys --event sdt_libc:* cargo run
     0.000 sdt_libc:setjmp:(7f326b69c4d1))
    28.423 sdt_libc:setjmp:(7f4b0a5364d1))
    29.000 sdt_libc:setjmp:(7f4b0a5364d1))
    88.597 sdt_libc:setjmp:(7fc01fd414d1))
    89.220 sdt_libc:setjmp:(7fc01fd414d1))
    95.501 sdt_libc:setjmp:(7f326b69c4d1))
     Running `target/debug/hello_world`
    97.110 sdt_libc:setjmp:(7f95e09234d1))
  Hello, world!
  #

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831791813.17065.17846564230840594888.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:07 -03:00
Masami Hiramatsu 05bf2c8a2a perf probe-cache: Add for_each_probe_cache_entry() wrapper
Add for_each_probe_cache_entry() wrapper macro for hiding list in
probe_cache.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831790386.17065.15082256697569419710.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:06 -03:00
Masami Hiramatsu c3492a3a4e perf probe: Make --list show only available cached events
Make "perf probe --cache --list" show only available cached events by
checking build-id validity.

E.g. without this patch:
  ----
  $ ./perf probe --cache --add oldevent=cmd_probe
  $ make #(to update ./perf)
  $ ./perf probe --cache --add newevent=cmd_probe
  $ ./perf probe --cache --list
  /home/mhiramat/ksrc/linux/tools/perf/perf (061e90539bac69
  probe_perf:newevent=cmd_probe
  /home/mhiramat/ksrc/linux/tools/perf/perf (c2e44d614e33e1
  probe_perf:oldevent=cmd_probe
  ----
It shows both of old and new events but user can not use old one.
With this;
  ----
  $ ./perf probe --cache -l
  /home/mhiramat/ksrc/linux/tools/perf/perf (061e90539bac69
  probe_perf:newevent=cmd_probe
  ----

This shows only new events which are on the existing binary.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831789417.17065.17896487479879669610.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:05 -03:00
Masami Hiramatsu 36a009fe07 perf probe: Accept %sdt and %cached event name
To improve usability, support %[PROVIDER:]SDTEVENT format to add new
probes on SDT and cached events.

e.g.
  ----
  # perf probe -x /lib/libc-2.17.so  %lll_lock_wait_private
  Added new event:
    sdt_libc:lll_lock_wait_private (on %lll_lock_wait_private in /usr/lib/libc-2.17.so)

  You can now use it in all perf tools, such as:

          perf record -e sdt_libc:lll_lock_wait_private -aR sleep 1

  # perf probe -l | more
    sdt_libc:lll_lock_wait_private (on __lll_lock_wait_private+21 in /usr/lib/libc-2.17.so)
  ----

Note that this is not only for SDT events, but also normal
events with event-name.

e.g. define "myevent" on cache (-n doesn't add the real probe)
  ----
  # perf probe -x ./perf --cache -n --add 'myevent=dso__load $params'
  ----
  Reuse the "myevent" from cache as below.
  ----
  # perf probe -x ./perf %myevent
  ----

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831788372.17065.3645054540325909346.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:05 -03:00
Masami Hiramatsu f6eb0518f3 perf probe: Fix to show correct error message for $vars and $params
Fix to show correct error messages for $vars and $params because
those special variables requires debug information to find the
real variables or function parameters.

E.g. without this fix;
  ----
  # perf probe -x /lib64/libc-2.23.so getaddrinfo \$params
  Failed to write event: Invalid argument
  Please upgrade your kernel to at least 3.14 to have access to feature $params
    Error: Failed to add events.
  ----

Perf ends up with an error, but the message is not correct.  With this
fix, perf shows correct error message as below.

  ----
  # perf probe -x /lib64/libc-2.23.so getaddrinfo \$params
  The /usr/lib64/libc-2.23.so file has no debug information.
  Rebuild with -g, or install an appropriate debuginfo package.
    Error: Failed to add events.
  ----

Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831787438.17065.6152436996780110699.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:04 -03:00
Wang Nan b4ee6d415e perf bpf: Support BPF program attach to tracepoints
To support 98b5c2c65c ("perf, bpf: allow bpf programs attach to
tracepoints"), this patch allows BPF scripts to select tracepoints in
their section name.

Example:

  # cat test_tracepoint.c
  /*********************************************/
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))
  SEC("raw_syscalls:sys_enter")
  int func(void *ctx)
  {
 	/*
 	 * /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/format:
 	 * ...
 	 * field:long id;	offset:8;	size:8;	signed:1;
 	 * ...
 	 * ctx + 8 select 'id'
 	 */
 	u64 id = *((u64 *)(ctx + 8));
 	if (id == 1)
 		return 1;
 	return 0;
  }
  SEC("_write=sys_write")
  int _write(void *ctx)
  {
 	return 1;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  /*********************************************/
  # perf record -e ./test_tracepoint.c  dd if=/dev/zero of=/dev/null count=5
  5+0 records in
  5+0 records out
  2560 bytes (2.6 kB) copied, 6.2281e-05 s, 41.1 MB/s
  [ perf record: Woken up 1 times to write data ]
  # perf script
         dd 13436 [005] 1596.490869: raw_syscalls:sys_enter: NR 1 (1, 178d000, 200, 7ffe82470d60, ffffffffffffe020, fffff
         dd 13436 [005] 1596.490871:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490873: raw_syscalls:sys_enter: NR 1 (1, 178d000, 200, ffffffffffffe000, ffffffffffffe020, f
         dd 13436 [005] 1596.490874:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490876: raw_syscalls:sys_enter: NR 1 (1, 178d000, 200, ffffffffffffe000, ffffffffffffe020, f
         dd 13436 [005] 1596.490876:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490878: raw_syscalls:sys_enter: NR 1 (1, 178d000, 200, ffffffffffffe000, ffffffffffffe020, f
         dd 13436 [005] 1596.490879:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490881: raw_syscalls:sys_enter: NR 1 (1, 178d000, 200, ffffffffffffe000, ffffffffffffe020, f
         dd 13436 [005] 1596.490882:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490900: raw_syscalls:sys_enter: NR 1 (2, 7ffe8246e640, 1f, 40acb8, 7f44bac74700, 7f44baa4fba
         dd 13436 [005] 1596.490901:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490917: raw_syscalls:sys_enter: NR 1 (2, 7ffe8246e640, 1a, fffffffa, 7f44bac74700, 7f44baa4f
         dd 13436 [005] 1596.490918:  perf_bpf_probe:_write: (ffffffff812351e0)
         dd 13436 [005] 1596.490932: raw_syscalls:sys_enter: NR 1 (2, 7ffe8246e640, 1a, fffffff9, 7f44bac74700, 7f44baa4f
         dd 13436 [005] 1596.490933:  perf_bpf_probe:_write: (ffffffff812351e0)

Committer note:

Further testing:

  # trace --no-sys --event /home/acme/bpf/tracepoint.c cat /etc/passwd > /dev/null
     0.000 raw_syscalls:sys_enter:NR 1 (1, 7f0490504000, c48, 7f0490503010, ffffffffffffffff, 0))
     0.006 perf_bpf_probe:_write:(ffffffff81241bc0))
  #

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:04 -03:00
Wang Nan cd102d70fe perf bpf: Rename bpf__foreach_tev() to bpf__foreach_event()
Following commit will allow BPF script attach to tracepoints.
bpf__foreach_tev() will iterate over all events, not only kprobes.
Rename it to bpf__foreach_event().

Since only group and event are used by caller, there's no need to pass
full 'struct probe_trace_event' to bpf_prog_iter_callback_t. Pass only
these two strings. After this patch bpf_prog_iter_callback_t natually
support tracepoints.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:03 -03:00
Wang Nan 8c619d6a33 perf event parser: Add const qualifier to evt_name and sys_name
Add missing 'const' qualifiers so following commits are able to create
tracepoints using const strings.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:03 -03:00
Wang Nan 705fa2190d tools lib bpf: Report error when kernel doesn't support program type
Now libbpf support tracepoint program type. Report meaningful error when kernel
version is less than 4.7.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:02 -03:00
Wang Nan 5f44e4c810 tools lib bpf: New API to adjust type of a BPF program
Add 4 new APIs to adjust and query the type of a BPF program.
Load program according to type set by caller. Default is set to
BPF_PROG_TYPE_KPROBE.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:02 -03:00
Arnaldo Carvalho de Melo 1a4bf28573 objtool: Avoid checking code drift on busybox's diff
That doesn't have -I to match lines.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zqv1h6okt70e2huokkdtf1u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:08:54 -03:00
Arnaldo Carvalho de Melo 774bec3fdd objtool: Add fallback from ELF_C_READ_MMAP to ELF_C_READ
Not all libelf implementations have this "Please, ELF_C_READ, but use
mmap if possible" elf_begin() cmd, so provide a fallback to plain old
ELF_C_READ.

Case in point: Alpine Linux 3.4.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1fctuknrawgoi5xqon4mu9dv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 15:38:50 -03:00
Arnaldo Carvalho de Melo 2a00f026a1 tools: Fix up BITS_PER_LONG setting
It was set based on CONFIG_64BIT, that is available only when using
Kconfig, which we're working towards but not to the point of having this
CONFIG variable set, so synthesize it from available compiler defined
defines, __SIZEOF_LONG__ or, lacking that, __WORDSIZE.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-og5fmkr17856lhupacihwxvb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 15:04:04 -03:00
Ingo Molnar 7b39cafb7a tools: Work around BITS_PER_LONG related build failure in objtool
The objtool build fails with the recent changes to the bits-per-long
headers:

  tools/include/linux/bitops.h:12:0: error: "BITS_PER_LONG" redefined [-Werror]

Which got introduced by:

  bb9707077b tools: Copy the bitsperlong.h files from the kernel

Work it around for the time being.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-13 09:37:43 +02:00
Dan Williams 7a9eb20666 pmem: kill __pmem address space
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem().  Now that
wmb_pmem() is gone, there is little need to keep this annotation.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-12 19:25:38 -07:00
Steven Rostedt 6d248fbda5 tools lib traceevent: Add filter on task CPU id
Add a 'CPU' special field to allow the filter in trace-cmd report to
filter on the task's CPU.

By adding a special field 'CPU' (all caps) the user can now filter out
tasks based on which CPU they are on. This is useful when filtering out
(or in) a bunch of threads.

  -F 'CPU == 0'

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20160712093306.5b058103@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:27:39 -03:00
Jiri Olsa 9881d7df9d perf python: Add tracepoint example
To show how to enable a tracepoint and access its fields.

Committer note:

Testing it:

  # ls -l /tmp/build/perf/python/perf.so
  -rwxrwxr-x. 1 acme acme 1563256 Jul 12 16:19 /tmp/build/perf/python/perf.so
  # export PYTHONPATH=/tmp/build/perf/python/
  # tools/perf/python/tracepoint.py 2> /dev/null | head -200 | tail -10
  time 76345337296548 prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=tracepoint.py- next_pid=18479 next_prio=120
  time 76345338520479 prev_comm=gnome-shelln-b prev_pid=2186 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/1 next_pid=0 next_prio=120
  time 76345337309942 prev_comm=tracepoint.py- prev_pid=18479 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/0 next_pid=0 next_prio=120
  time 76345337312302 prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=tracepoint.py- next_pid=18479 next_prio=120
  time 76345337324927 prev_comm=tracepoint.py- prev_pid=18479 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/0 next_pid=0 next_prio=120
  time 76345337327115 prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=tracepoint.py- next_pid=18479 next_prio=120
  time 76345338621750 prev_comm=swapper/2 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=rcuos/2 next_pid=29 next_prio=120
  time 76345338607922 prev_comm=swapper/3 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=rcu_sched next_pid=7 next_prio=120
  time 76345337338817 prev_comm=tracepoint.py- prev_pid=18479 prev_prio=120 prev_state=0x1 ==> next_comm=swapper/0 next_pid=0 next_prio=120
  time 76345338627156 prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=0x0 ==> next_comm=head-terminal- next_pid=18480 next_prio=120
  #
  # strip /tmp/build/perf/python/perf.so
  # ls -l /tmp/build/perf/python/perf.so
  -rwxrwxr-x. 1 acme acme 319616 Jul 12 16:25 /tmp/build/perf/python/perf.so

Reported-and-Tested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:23:35 -03:00
Jiri Olsa bae57e3825 perf python: Add support to resolve tracepoint fields
Adding tp_getattro callback for sample event. It resolves tracepoint
fields in runtime.

It's now possible to access tracepoint fields in normal fashion like
hardcoded ones (see the example in the next patch).

Reported-and-Tested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:19:16 -03:00
Jiri Olsa 377f698db1 perf python: Add struct evsel into struct pyrf_event
To be able to find out event configuration info during sample parsing.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:18:36 -03:00
Jiri Olsa 1075fbb22f perf python: Add perf.tracepoint method
To get id of the tracepoint from subsystem and name strings. The
interface is:

  id = perf.tracepoint(sys, name)

In case of error -1 is returned.

It will be used to get python tracepoint event's config value for
tracepoint event.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:17:54 -03:00
Jiri Olsa 85e37de3a9 perf python: Put perf.event objects into dictionary
Make perf.event object parts of the perf module dictionary so we can
address them by name.

The following objects/names are added:

  mmap_event
  lost_event
  comm_event
  task_event
  throttle_event
  task_event
  read_event
  sample_event
  switch_event

We can now use it in python script like:
  ...
  event = evlist.read_on_cpu(cpu)
  ...
  if not isinstance(event, perf.sample_event):

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:17:14 -03:00
Jiri Olsa e8968e6541 perf python: Fix pyrf_evlist__read_on_cpu event consuming
We can't consume the event before parsing it. Under heavy load we could
get caught by kernel writer overwriting the event we're trying to parse.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:16:44 -03:00
Jiri Olsa ad4e3c0458 perf python: Init perf_event_attr::size in perf.evsel constructor
Currently 0 is passed as perf_event_attr::size, which could block usage
of new features.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:16:17 -03:00
Jiri Olsa 71fe1052af perf tools: Introduce trace_event__tp_format_id()
To get struct event_format object from tracepoint ID.  It will be used
in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:14:52 -03:00
Jiri Olsa 7cb5c5acab perf evlist: Make event2evsel public
It will be used outside of evlist.c object in folowing patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1468148882-10362-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:13:58 -03:00
David Tolnay cae15db749 perf symbols: Add Rust demangling
Rust demangling is another step after bfd demangling. Add a diagnosis to
identify mangled Rust symbols based on the hash that the Rust mangler appends
as the last path component, as well as other characteristics.  Add a demangler
to reconstruct the original symbol.

Committer notes:

How I tested it:

Enabled COPR on Fedora 24 and then installed the 'rust-binary' package,
with it:

  $ cat src/main.rs
  fn main() {
      println!("Hello, world!");
  }
  $ cat Cargo.toml
  [package]

  name = "hello_world"
  version = "0.0.1"
  authors = [ "Arnaldo Carvalho de Melo <acme@kernel.org>" ]

  $ perf record cargo bench
   Compiling hello_world v0.0.1 (file:///home/acme/projects/hello_world)
     Running target/release/hello_world-d4b9dab4b2a47d75

  running 0 tests

  test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured

  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.096 MB perf.data (1457 samples) ]
  $

Before this patch:

  $ perf report --stdio --dsos librbml-e8edd0fd.so
  # dso: librbml-e8edd0fd.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:u'
  # Event count (approx.): 979599126
  #
  # Overhead  Command  Symbol
  # ........  .......  .............................................................................................................
  #
       1.78%  rustc    [.] rbml::reader::maybe_get_doc::hb9d387df6024b15b
       1.50%  rustc    [.] _$LT$reader..DocsIterator$LT$$u27$a$GT$$u20$as$u20$std..iter..Iterator$GT$::next::hd9af9e60d79a35c8
       1.20%  rustc    [.] rbml::reader::doc_at::hc88107fba445af31
       0.46%  rustc    [.] _$LT$reader..TaggedDocsIterator$LT$$u27$a$GT$$u20$as$u20$std..iter..Iterator$GT$::next::h0cb40e696e4bb489
       0.35%  rustc    [.] rbml::reader::Decoder::_next_int::h66eef7825a398bc3
       0.29%  rustc    [.] rbml::reader::Decoder::_next_sub::h8e5266005580b836
       0.15%  rustc    [.] rbml::reader::get_doc::h094521c645459139
       0.14%  rustc    [.] _$LT$reader..Decoder$LT$$u27$doc$GT$$u20$as$u20$serialize..Decoder$GT$::read_u32::h0acea2fff9669327
       0.07%  rustc    [.] rbml::reader::Decoder::next_doc::h6714d469c9dfaf91
       0.07%  rustc    [.] _ZN4rbml6reader10doc_as_u6417h930b740aa94f1d3aE@plt
       0.06%  rustc    [.] _fini
  $

After:

  $ perf report --stdio --dsos librbml-e8edd0fd.so
  # dso: librbml-e8edd0fd.so
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'cycles:u'
  # Event count (approx.): 979599126
  #
  # Overhead  Command  Symbol
  # ........  .......  .................................................................
  #
     1.78%  rustc    [.] rbml::reader::maybe_get_doc
     1.50%  rustc    [.] <reader::DocsIterator<'a> as std::iter::Iterator>::next
     1.20%  rustc    [.] rbml::reader::doc_at
     0.46%  rustc    [.] <reader::TaggedDocsIterator<'a> as std::iter::Iterator>::next
     0.35%  rustc    [.] rbml::reader::Decoder::_next_int
     0.29%  rustc    [.] rbml::reader::Decoder::_next_sub
     0.15%  rustc    [.] rbml::reader::get_doc
     0.14%  rustc    [.] <reader::Decoder<'doc> as serialize::Decoder>::read_u32
     0.07%  rustc    [.] rbml::reader::Decoder::next_doc
     0.07%  rustc    [.] _ZN4rbml6reader10doc_as_u6417h930b740aa94f1d3aE@plt
     0.06%  rustc    [.] _fini
  $

Signed-off-by: David Tolnay <dtolnay@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5780B7FA.3030602@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 16:12:38 -03:00
Arnaldo Carvalho de Melo 1c1a3a4729 perf tools: Add feature detection for gelf_getnote()
That is not present on some libelf implementations, such as the one used
in Alpine Linux: libelf-0.8.13.

This ends up disabling the SDT code, that relies on this function.

One alternative would be to provide an weak fallback implementation or
the open coded variant used by the buildid sysfs notes reading code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-82lh22ybedy9b9lych8xj12g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:41 -03:00
Arnaldo Carvalho de Melo c8a3f7de76 perf intel-pt-decoder: Avoid checking code drift on busibox's diff
That doesn't have -I to match lines.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7nz9hnbk7a9p91ou927ye5yh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:41 -03:00
Arnaldo Carvalho de Melo 3c7752f7ab perf tools: Don't add kernel directories to the header search path
We've decided not to access kernel source files because changes there
could break the tooling side, this is one more step in that direction.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ar0hupkxl45h5hk09l2rprj3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:40 -03:00
Arnaldo Carvalho de Melo 1d4489d0ec perf tools: Add the tools/ stringify copy to the MANIFEST
So that we don't end up using the kernel one when building out of tree,
via a detached tarball.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 737ef7d32c ("tools include: Copy linux/stringify.h from the kernel")
Link: http://lkml.kernel.org/n/tip-t8yn1d7y0magk889ymc8jlai@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:40 -03:00
Arnaldo Carvalho de Melo bb9707077b tools: Copy the bitsperlong.h files from the kernel
We use it in bitops/__ffs.h and bitops/atomic.h, that we also got from
the kernel, but were getting it from either newer systems that carry it
in /usr/include, or from the kernel sources, that we decided not to
touch from tools/ code. Fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lwqvgbuitjmrdpjmjp6zqnyx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:39 -03:00
Arnaldo Carvalho de Melo 39f54862a9 perf script python: Silence -Werror=maybe-uninitialized on gcc 5.3.0
Sounds like a compiler bug, but to silence it, initialize those
variables to NULL.

Noticed on:

Target: x86_64-alpine-linux-musl
Configured with: /home/buildozer/aports/main/gcc/src/gcc-5.3.0/configure
--prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
--build=x86_64-alpine-linux-musl --host=x86_64-alpine-linux-musl
--target=x86_64-alpine-linux-musl --with-pkgversion='Alpine 5.3.0'
--enable-checking=release --disable-fixed-point --disable-libstdcxx-pch
--disable-multilib --disable-nls --disable-werror --disable-symvers
--enable-__cxa_atexit --enable-esp --enable-cloog-backend
--enable-languages=c,c++,objc,java,fortran,ada --disable-libssp
--disable-libmudflap --disable-libsanitizer --enable-shared
--enable-threads --enable-tls --with-system-zlib
Thread model: posix
gcc version 5.3.0 (Alpine 5.3.0)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zyvsjvbl45o7hzcuz78wu2xi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:39 -03:00
Arnaldo Carvalho de Melo cc31078cf1 perf symbols: Provide a GElf_Nhdr typedef
This one can be safely defined to be Elf64_Nhdr, as it is in elfutils's
libelf, but not on musl libc, as both Elf64_Nhdr and  Elf32_Nhdr have
the same layout.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-w8z8614l03lc8bip4ijbywbt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:38 -03:00
Arnaldo Carvalho de Melo 6e6fec966d perf trace beauty seccomp: Remove seccomp.h include
All we need from it is already conditionally defined, and this header
file is not present in older systems, so ditch it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3jxpz9gwahk4e7ltqtnr1rjg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:38 -03:00
Arnaldo Carvalho de Melo e53e6bb8eb perf trace beauty futex_op: Add missing defines for older systems
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6qkuhv2mrcxmpy5sasc3c9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:37 -03:00
Arnaldo Carvalho de Melo 9a3dc28bb0 perf tools: Fallback to reading sysfs to get cacheline size
On systems where sysconf(_SC_LEVEL1_DCACHE_LINESIZE) is not available,
such as musl LIBC and Android's bionic libc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-772obxzby758g7m2wmzcejxz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:37 -03:00
Arnaldo Carvalho de Melo dd7bd10936 tools: Copy the header files needed by perf tools
Those kernel files were being directly accessed, which we're not
allowing anymore to avoid that changes in the kernel side break tooling.

Warn if these copies drift from the original files.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Auger <eric.auger@linaro.org>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/n/tip-mnopguymhnwzjhw3mowllvsy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:36 -03:00
Arnaldo Carvalho de Melo e3e1d7e077 perf trace: Remove unused sys/ptrace.h include
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ogtjqc0hxm961djgiwboe2q7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:35 -03:00
Arnaldo Carvalho de Melo a395b35d33 perf tools: Remove unneeded magic.h include from util.h
Not used anymore, IIRC it was for useless PROC_FS_MAGIC procfs checks,
but those are long gone.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v027did3kvj0vz7bofgzkw29@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:35 -03:00
Arnaldo Carvalho de Melo c7007e9836 perf tools: Introduce weak alternative to sched_getcpu()
Which is just a wrapper for sys_getcpu and is not present in at least
musl libc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kblef7svmhr0g93kkx78envg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:34 -03:00
Arnaldo Carvalho de Melo 4998a12246 tools: Copy uapi/linux/hw_breakpoint.h from the kernel
To allow the build to complete on older systems, where those files are
either not uptodate, lacking some recent additions or not present at
all.

And check if the copy drifts from the kernel.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3jz31pz4nw526uko5da9e7o3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:34 -03:00
Arnaldo Carvalho de Melo 4ffde49246 perf test bpf: Use epoll_wait() instead of epoll_pwait()
The prototype for epoll_wait() is available in older distros, so use it
instead of epoll_pwait() (removing the last NULL arg, the sigmask,
makes it the same thing anyway) to avoid breaking the build.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pwiwizloxt0jujy8em80qut3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:33 -03:00
Arnaldo Carvalho de Melo 12f020338a tools: Copy uapi/asm/perf_regs.h from the kernel
To allow the build to complete on older systems, where those files are
either not uptodate, lacking some recent additions or not present at
all.

And check if the copy drifts from the kernel.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sxf7rpow2blsno5f7t6n0sqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:33 -03:00
Arnaldo Carvalho de Melo 971e827bff tools lib bpf: Copy bpf.h and bpf_common.h from the kernel
To allow the build to complete on older systems, where those files are
either not uptodate, lacking some recent additions or not present at
all.

And check if the copy drifts from the kernel, as in this synthetic test:

    BUILD:   Doing 'make -j4' parallel build
  Warning: tools/include/linux/bpf.h differs from kernel
  Warning: tools/include/linux/bpf_common.h differs from kernel

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5plvi2gq4x469dcyybiu226q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:32 -03:00
Arnaldo Carvalho de Melo 7d7d1bf1d1 perf bench: Copy kernel files needed to build mem{cpy,set} x86_64 benchmarks
We can't access kernel files directly from tools/, so copy the required
bits, and make sure that we detect when the original files, in the
kernel, gets modified.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z7e76274ch5j4nugv048qacb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:32 -03:00
Arnaldo Carvalho de Melo c4b6014e8b tools: Add copy of perf_event.h to tools/include/linux/
We shouldn't use headers from the kernel sources directly, instead we
should use the system's headers or in cases where that isn't possible,
like with perf_event.h, where the introduction of kernel features such
as perf_event_attr.{write_backwards,sample_max_stack} and
PERF_EVENT_IOC_PAUSE_OUTPUT take some time to become available in
/usr/include/linux/perf_event.h we need a copy.

Do it and check for source code drift, emitting a warning when changes
are detected.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v6aks5un3s5pehory6f42nrl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:31 -03:00
Arnaldo Carvalho de Melo e083a21fca perf tools: event.h needs asm/perf_regs.h
As it uses PERF_REGS_MAX, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2t232w0kcqu97xod8t2at2h0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:31 -03:00
Arnaldo Carvalho de Melo 86695f59c9 perf bench futex: Add missing compiler.h header
Since these files use __maybe_unused, and that is defined in
linux/compiler.h, include it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1llbf59ut6xon6ti88jm0n9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:30 -03:00
Arnaldo Carvalho de Melo 07eebccbca tools lib subcmd: Use str_error_r()
To make it portable to non-glibc systems, that follow the XSI variant
instead of the GNU specific one that gets in place when _GNU_SOURCE is
defined.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bozcszy93tpgw9ad6qm3dhpx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:30 -03:00
Arnaldo Carvalho de Melo 61a6445e46 tools lib: Guard the strlcpy() header with __GLIBC__
Better to whitelist it for libraries that require it (glibc) than
blacklist it with the ones that don't (uclibc, musl libc, etc).

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-52ih0m63a2n63tanpy6yj682@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:29 -03:00
Arnaldo Carvalho de Melo b31e3e3316 tools lib api fs: Use str_error_r()
To make it portable to non-glibc systems, that follow the XSI variant
instead of the GNU specific one that gets in place when _GNU_SOURCE is
defined.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mixgnh3iyajuqogn2opsocdy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:29 -03:00
Arnaldo Carvalho de Melo c3cec9e68f tools lib traceevent: Use str_error_r()
To make it portable to non-glibc systems, that follow the XSI variant
instead of the GNU specific one that gets in place when _GNU_SOURCE is
defined.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c1gn8x978qfop65m510wy43o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:28 -03:00
Arnaldo Carvalho de Melo d0761e37fe perf tools: Uninline scnprintf() and vscnprint()
They were in tools/include/linux/kernel.h, requiring that it in turn
included stdio.h, which is way too heavy.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-855h8olnkot9v0dajuee1lo3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:24 -03:00
Arnaldo Carvalho de Melo 5496bc0c0d perf evsel: Uninline the is_function_event method
So that we don't have to carry a string.h header in evsel.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2lwpm2aytdvvgo626zuat6et@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:59 -03:00
Arnaldo Carvalho de Melo 175729fc2c perf tools: Remove needless includes from cache.h
The cache.h header doesn't use any of the definitions in some of the
headers it includes, ditch them and fix the fallout, where files were
getting stuff they needed just because they were including it, sometimes
not using what it really exports at all.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:58 -03:00
Arnaldo Carvalho de Melo 16b7c9bda5 perf tools: Add missing header to color.c
It uses isatty(), so needs unistd.h, include it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ivwuz8f68tb3sdcpguo9wmvx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:58 -03:00
Arnaldo Carvalho de Melo 10ca87fde7 perf tests x86 rdpmc: Add missing headers
Another case of a file using definitions and getting them by chance,
from indirect header inclusion, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o3l1vi4gw2w6xyc6z4ig938s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:57 -03:00
Arnaldo Carvalho de Melo 16b91d5ed4 perf test fdarray: Add missing poll.h header
It uses poll() but was getting the needed header by chance, do it
explicitely.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-76b3c5imnl6p69j4lqewzu9l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:56 -03:00
Arnaldo Carvalho de Melo 3ac55b1df0 perf tests cpumap: Add missing headers
It was getting all sort of needed stuff by sheer luck, via indirect
includes, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tvjgo39t8k0ye6dntv3knran@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:56 -03:00
Arnaldo Carvalho de Melo 380a71a22b perf quote: Disentangle headers
No need to include stdio.h from quote.h, also forward declare strbuf.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-k3kbcxhctpxvz6ckve3kv6c1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:55 -03:00
Arnaldo Carvalho de Melo 7ed0958ae8 perf strbuf: Add missing headers
We were only indirectly and by luck getting types, etc needed for this
file, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-gr8ejvzm7ojk6zwpeplyx9zu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:55 -03:00
Arnaldo Carvalho de Melo cec07f53c3 perf tools: Move syscall number fallbacks from perf-sys.h to tools/arch/x86/include/asm/
And remove the empty tools/arch/x86/include/asm/unistd_{32,64}.h files
introduced by eae7a755ee ("perf tools, x86: Build perf on older
user-space as well").

This way we get closer to mirroring the kernel for cases where __NR_
can't be found for some include path/_GNU_SOURCE/whatever scenario.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kpj6m3mbjw82kg6krk2z529e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:54 -03:00
Arnaldo Carvalho de Melo 9c304f6c71 perf bench: Disentangle headers
We should try avoiding that perf.h header, it includes way too much
stuff, making it difficult to use things like setting _GNU_SOURCE only
on a small set of headers.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lb6eg9w1kzrwhv0gm3ho0h54@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:54 -03:00
Arnaldo Carvalho de Melo ab6526b2ca perf tests openat-syscall-tp-fields: Add some conditional defines
These were only defined if _GNU_SOURCE was set in older glibc versions,
check that and provide the defines in such cases.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b8esouhpg4tk6vi4n3d7ipch@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:54 -03:00
Arnaldo Carvalho de Melo 48e1f91ad2 perf trace: Add conditional define for AT_FDCWD
This one was only defined if _GNU_SOURCE was set in older glibc
versions, check that and provide the define in such cases.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ilsgsysr6s3mru7rf2befnu5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:53 -03:00
Arnaldo Carvalho de Melo 1fbe7df819 perf tests: Add missing pthread.h include for CPU_*() macros
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dfcynqzvecsu55zmpxub9jgv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:53 -03:00
Arnaldo Carvalho de Melo 8a15858904 perf bench: Add missing pthread.h include for CPU_*() macros
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48qbfv7tqs8n8ey74lbyfjtq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:52 -03:00
Arnaldo Carvalho de Melo c8b5f2c96d tools: Introduce str_error_r()
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.

But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.

So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:19:47 -03:00
Haiyang Zhang 178cd55f08 tools: hv: Add a script to help bonding synthetic and VF NICs
This script helps to create bonding network devices based on synthetic NIC
(the virtual network adapter usually provided by Hyper-V) and the matching
VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can
function as one network device, and fail over to the synthetic NIC if VF is
down.

Mayjor distros (RHEL, Ubuntu, SLES) supported by Hyper-V are supported by
this script.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12 10:41:53 -07:00
Arnaldo Carvalho de Melo ffe3a28a8b perf trace beauty open_flags: Add more conditional defines
Don't handle some flags only if they have its defines in headers at
time of building, define what is missing.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wgjxeidwpowrvqgrxr080k6u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo 4c7c224ac4 perf trace beauty flock: Add more conditional defines
Don't handle some flags only if they have its defines in headers at
time of building, define what is missing.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pgoxanv1y6hfcnryxawzuskl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo 256763b017 perf trace beauty mmap: Add more conditional defines
Don't handle some flags only if they have its defines in headers at
time of building, define what is missing.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-czbmxb01xzcl3h2qxuzoqkj5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo 9d4a94cabc perf trace beauty open_flags: Add missing headers
Those beautifiers need to make sure they include what they reference,
as changes in builtin-trace.c may end up removing needed stuff, like
when undefining _GNU_SOURCE.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-a9cz8za6lqutfapn5e7uum09@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo f8e018704c perf trace beauty flock: Add missing fcntl.h include
Those beautifiers need to make sure they include what they reference,
as changes in builtin-trace.c may end up removing needed stuff, like
when undefining _GNU_SOURCE.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2etqhfmgv5jcnfwnkbwadns2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo 0e91e6bfd3 perf trace beauty msg_flags: Remove MSG_TRYHARD
It is the same as MSG_DONTROUTE and is only defined together with
_GNU_SOURCE.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q4vbov6jl0e0152y01kv2htw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo 175b968b81 perf report: Introduce --stdio-color to setup the color output mode selection
'perf report --stdio' will colorize entries with most hits and possibly
some other aspects of its output, but those colors gets suppressed if we
redirect the output to a non-tty, allow keeping the colors by adding a
new option, --stdio-color, now this use case will also output escape
sequences for colors:

  $ perf annotate --stdio-color | more

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3iuawqjldu4i8gziot7e3d5n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo 53fe4ba1da perf annotate: Introduce --stdio-color to setup the color output mode selection
'perf annotate --stdio' will colorize entries with most hits and
possibly some other aspects of its output, but those colors gets
suppressed if we redirect the output to a non-tty, allow keeping the
colors by adding a new option, --stdio-color, now this use case will
also output escape sequences for colors:

  $ perf annotate --stdio-color | more

Based-on-a-patch-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sjrnixani5pg6qez640gaxhf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Arnaldo Carvalho de Melo c09615f29c perf ui stdio: Add way to setup the color output mode selection
In --stdio we turn off color output when the output is not a tty,
which is not always desirable, for instance, in:

  perf annotate | more

the 'more' tool is perfectly capable of processing the escape sequences
for colored output.

Allow using the existing logic for .perfconfig's "color.ui" to be used
from the command line by providing a stdio__config_color() helper, that
will be used by annotate and report in follow up patches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1u4wjdbcc41dxndsb4klpa9y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Jiri Olsa a5051979f5 perf hists: Introduce hists__add_entry_ops function
Introducing hists__add_entry_ops function to allow using the allocation
callbacks externally.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467701765-26194-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Jiri Olsa f542e7670e perf hists: Introduce hist_entry_ops
Introducing allocation callbacks, that allows to extend current
hist_entry object into objects with special needs without polluting the
current hist_entry object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467701765-26194-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Jiri Olsa 0a269a6bb3 perf hists: Introduce hist_entry__init function
Move the 'struct hist_entry' initialization code to a separate function.
It'll be useful and more clear for the following patches that introduce
allocation callbacks.

Releasing the hist_entry object in hist_entry__new function
(where it's allocated) rather than in hist_entry__init.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467701765-26194-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 00:00:39 -03:00
Dan Williams 85d3fa02e4 tools/testing/nvdimm: simulate multiple flush hints per-dimm
Sample nfit data to test the kernel's handling of the multiple
flush-hint case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11 16:13:41 -07:00
Josh Poimboeuf 0ea5ad869c objtool: Fix STACK_FRAME_NON_STANDARD macro checking for function symbols
Mathieu Desnoyers reported that the STACK_FRAME_NON_STANDARD macro
wasn't working with the lttng_filter_interpret_bytecode() function in
the lttng-modules code.

Usually the relocation created by STACK_FRAME_NON_STANDARD creates a
reference to a section symbol like this:

  Offset              Type            Value               Addend Name
  000000000000000000  X86_64_64       000000000000000000   +3136 .text

But in this case it created a reference to a function symbol:

  Offset              Type            Value               Addend Name
  000000000000000000  X86_64_64       0x00000000000003a0      +0 lttng_filter_interpret_bytecode

To be honest I have no idea what causes gcc to decide to do one over the
other.  But both are valid ELF, so add support for the function symbol.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lttng-dev@lists.lttng.org
Link: http://lkml.kernel.org/r/9cee42843bc6d94e990a152e4e0319cfdf6756ef.1466023450.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-10 17:15:58 +02:00
Jesper Dangaard Brouer 1db19db7f5 net: tracepoint napi:napi_poll add work and budget
An important information for the napi_poll tracepoint is knowing
the work done (packets processed) by the napi_poll() call. Add
both the work done and budget, as they are related.

Handle trace_napi_poll() param change in dropwatch/drop_monitor
and in python perf script netdev-times.py in backward compat way,
as python fortunately supports optional parameter handling.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-09 18:05:02 -04:00
Ingo Molnar 52e31f89cc Merge branch 'linus' into x86/asm, to pick up fixes before merging new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-09 10:43:49 +02:00
Dmitry Safonov f80fd3a5ff selftests/x86: Add vDSO mremap() test
Should print this on vDSO remapping success (on new kernels):

 [root@localhost ~]# ./test_mremap_vdso_32
	AT_SYSINFO_EHDR is 0xf773f000
 [NOTE]	Moving vDSO: [f773f000, f7740000] -> [a000000, a001000]
 [OK]

Or print that mremap() for vDSOs is unsupported:

 [root@localhost ~]# ./test_mremap_vdso_32
	AT_SYSINFO_EHDR is 0xf773c000
 [NOTE]	Moving vDSO: [0xf773c000, 0xf773d000] -> [0xf7737000, 0xf7738000]
 [FAIL]	mremap() of the vDSO does not work on this kernel!

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160628113539.13606-3-dsafonov@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-08 14:17:51 +02:00
Dan Williams b28f08ce50 tools/testing/nvdimm: remove __wrap_devm_memremap_pages placeholder
This now dead code was needed to prevent compile errors while being
staged in -next for v4.5.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-07 17:11:02 -07:00
Srinivas Pandruvada ebf5926a00 tools/power turbostat: Replace MSR_NHM_TURBO_RATIO_LIMIT
Replace MSR_NHM_TURBO_RATIO_LIMIT with MSR_TURBO_RATIO_LIMIT.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-07 15:31:59 +02:00
Michael Ellerman bc5c0a0d7f selftests/powerpc: Use "Delta" rather than "Error" in normal output
Use "Delta" to refer to the difference between measurements, rather than
"Error", so scripts that look for "Error" aren't confused into thinking
there was a failure.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-07 16:33:26 +10:00
Chris Smart 4375088072 selftests/powerpc: Test unaligned copy and paste
Test that an ISA 3.0 compliant machine performing an unaligned copy,
copy_first, paste or paste_last is sent a SIGBUS.

Signed-off-by: Chris Smart <chris@distroguy.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 23:49:51 +10:00
Michael Ellerman 0c63e8b7b9 selftests/powerpc: Import Anton's mmap & futex micro benchmarks
These are useful little loops for smoke testing performance.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 23:49:50 +10:00
Cyril Bur f2418ae8a8 selftests/powerpc: Fix generation of vector instructions/types in context_switch
Currently it doesn't appear the resulting binary actually uses any
Altivec or VSX instructions the solution is to explicitly tell GCC to
use vector instructions and use vector types in the code.

Part of this this issue can be GCC version specific:

GCC 4.9.x is happy to use Altivec and VSX instructions if altivec.h is
includedi (and possibly if vector types are used), this also means that
4.9.x will use VSX instructions even if only -maltivec is passed. It is
also possible that Altivec instructions will be used even without
-maltivec or -mabi=altivec.

GCC 5.2.x complains about the lack of -maltivec parameter if altivec.h
is included and will not use VSX unless -mvsx is present on commandline.

GCC 5.3.0 has a regression that means __attribute__((__target__("no-vsx"))
fails to build. A fix is targeted for 5.4.

Furthermore LTO (Link Time Optimisation) doesn't play well with
__attribute__((__target__("no-vsx")), LTO can cause GCC to forget about
the attribute and compile with VSX instructions regardless. Be wary when
enabling -flfo for this test.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 23:49:50 +10:00
Cyril Bur 94fa56a96a selftests/powerpc: Fix usage message in context_switch
When we inverted the behaviour of the flags we forgot to update the
usage message.

Fixes: 51c21e72eb ("selftests/powerpc: Make context_switch touch FP/altivec/vector by default")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 23:49:49 +10:00
Cyril Bur d4ecdff2ec selftests/powerpc/pmu: Use signed long to read perf_event_paranoid
Excerpt from man 2 perf_event_open:

  /proc/sys/kernel/perf_event_paranoid
  The perf_event_paranoid file can be set to restrict access to the
  performance counters.
    2 allow only user-space measurements.
    1 allow both kernel and user measurements (default).
    0 allow access to CPU-specific data but not raw tracepoint samples.
   -1 no restrictions.

require_paranoia_below() should return 0 if perf_event_paranoid is below
a specified level, the value from perf_event_paranoid is read into an
unsigned long so the incorrect value is returned when
perf_event_paranoid is set to -1.

Without this patch applied there is the same number of selftests/powerpc
which skip when /proc/sys/kernel/perf_event_paranoid is set to 1 or -1
but no skips when set to zero.

With this patch applied there are no skipped selftests/powerpc test when
/proc/sys/kernel/perf_event_paranoid is set to 0 or -1.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 23:49:49 +10:00
Arnaldo Carvalho de Melo f3d082ceab perf tools: Sync copy of syscall_64.tbl with the kernel
Noticed by the build system, that emitted this warning:

  Warning: x86_64's syscall_64.tbl differs from kernel

This was due to the wiring up of the recently added preadv2 & pwritev2
syscalls to the compat code, which hadn't been done by the patch
introducing those syscalls: 4babf2c5ef ("x86: wire up preadv2 and
pwritev2").

The patch doing the compat wiring was:

  482dd2ef12 ("x86/syscalls: Wire up compat readv2/writev2 syscalls")

This just silences the perf build warning, as compat syscalls still
can't be supported in 'perf trace´ due to limitations in the
raw_syscalls:sys_{enter,exit} tracepoints it relies on.

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4dm8eoy0wslgtwqdhz64ods0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:29:40 -03:00
Chris Phlipot 3d0376113e perf tools: Update android build documentation
Update the android build documentation according to recent android build
fixes. The instructions for step 1a and step 2 were updated to work with
NDK version 11(oldest supported version) and NDK version 12(current
version).

Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1467349955-1135-5-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:27:27 -03:00
Chris Phlipot fd01d06ae3 tools lib subcmd: Respect WERROR=0 for build
this enables the workaround for compilers that generate warnings when
compiling libsubcmd.

Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1467349955-1135-3-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:27:26 -03:00
Chris Phlipot b983d54473 tools lib api: Respect WERROR=0 for build
This enables the workaround for compilers that generate warnings when
compiling libapi.

Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1467349955-1135-2-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:27:26 -03:00
Wang Nan 203d1cacad tools lib bpf: Add license header
Adding a missing license descriptopn header to files in libbpf, make it
LGPL-2.1.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Leblond <eleblond@stamus-networks.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467630162-193121-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:27:25 -03:00
Jiri Olsa 6c50258443 perf unwind: Call unwind__prepare_access for forked thread
Currently we call unwind__prepare_access for map event.  In case we
report fork event the thread inherits its parent's maps and
unwind__prepare_access is never called for the thread.

This causes unwind__get_entries seeing uninitialized
unwind_libunwind_ops and thus returning no callchain.

Adding unwind__prepare_access calls for fork even processing.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:27:25 -03:00
Jiri Olsa a2873325ff perf unwind: Add initialized arg into unwind__prepare_access
Adding initialized arg into unwind__prepare_access to get feedback about
the initialization state.

It's not possible to get it from error code, because we return 0 even in
case we don't recognize dso, which is valid.

The 'initialized' value is used in following patch to speedup
unwind__prepare_access calls logic in fork path.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-4-git-send-email-jolsa@kernel.org
[ Remove ; after static inline function signatures, fixes build break ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 20:27:12 -03:00
Jiri Olsa 347ca87806 perf tests: Fix hist accumulation test
User's values from .perfconfig could overload the default callchain
setup and cause this test to fail.  Making sure the test is using
default callchain_param values.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:39:01 -03:00
Jiri Olsa c60da22aca perf header: Transform nodes string info to struct
Storing NUMA info within struct numa_node instead of strings. This way
it's usable in future patches.

Also it turned out it's slightly less code involved than using strings.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:39:01 -03:00
Masami Hiramatsu 6430a94ead perf buildid-cache: Scan and import user SDT events to probe cache
perf buildid-cache --add <binary> scans given binary and add
the SDT events to probe cache. "sdt_" prefix is appended for
all SDT providers to avoid event-name clash with other pre-defined
events. It is possible to use the cached SDT events as other cached
events, via perf probe --add "sdt_<provider>:<event>=<event>".

e.g.
  ----
  # perf buildid-cache --add /lib/libc-2.17.so
  # perf probe --cache --list | head -n 5
  /usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392):
  sdt_libc:setjmp=setjmp
  sdt_libc:longjmp=longjmp
  sdt_libc:longjmp_target=longjmp_target
  sdt_libc:memory_heap_new=memory_heap_new
  # perf probe -x /usr/lib/libc-2.17.so \
    -a sdt_libc:memory_heap_new=memory_heap_new
  Added new event:
    sdt_libc:memory_heap_new (on memory_heap_new
   in /usr/lib/libc-2.17.so)

  You can now use it in all perf tools, such as:

          perf record -e sdt_libc:memory_heap_new -aR sleep 1

  # perf probe -l
    sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so)
  ----

Note that SDT event entries in probe-cache file is somewhat different
from normal cached events. Normal one starts with "#", but SDTs are
starting with "%".

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:39:00 -03:00
Masami Hiramatsu 8d993d9690 perf probe: Add group name support
Allow user to set group name for adding new event.  Note that user must
ensure that the group name doesn't conflict with existing group name
carefully.

E.g. Existing group name can conflict with other events.  Especially,
using the group name reserved for kernel modules can hide kernel
embedded events when loading modules.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736024091.27797.9471545190066268995.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:39:00 -03:00
Hemant Kumar 060fa0c7a3 perf sdt: ELF support for SDT
This patch serves the initial support to identify and list SDT events in
binaries.  When programs containing SDT markers are compiled, gcc with
the help of assembler directives identifies them and places them in the
section ".note.stapsdt".

To find these markers from the binaries, one needs to traverse through
this section and parse the relevant details like the name, type and
location of the marker. Also, the original location could be skewed due
to the effect of prelinking. If that is the case, the locations need to
be adjusted.

The functions in this patch open a given ELF, find out the SDT section,
parse the relevant details, adjust the location (if necessary) and
populate them in a list.

A typical note entry in ".note.stapsdt" section is as follows :

                                 |--nhdr.n_namesz--|
                ------------------------------------
                |      nhdr      |     "stapsdt"   |
        -----   |----------------------------------|
         |      |  <location>       <base_address> |
         |      |  <semaphore>                     |
nhdr.n_descsize |  "provider_name"   "note_name"   |
         |      |   <args>                         |
        -----   |----------------------------------|
                |      nhdr      |     "stapsdt"   |
                |...

The above shows an excerpt from the section ".note.stapsdt".  'nhdr' is
a structure which has the note name size (n_namesz), note description
size (n_desc_sz) and note type (n_type).

So, in order to parse the note note info, we need nhdr to tell us where
to start from.  As can be seen from <sys/sdt.h>, the name of the SDT
notes given is "stapsdt".  But this is not the identifier of the note.

After that, we go to description of the note to find out its location, the
address of the ".stapsdt.base" section and the semaphore address.
Then, we find the provider name and the SDT marker name and then follow the
arguments.

Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736022628.27797.1201368329092908163.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:38:59 -03:00
Arnaldo Carvalho de Melo 2492c465ad perf build: Add feature detection for libelf's elf_getshdrstrndx()
That appeared after 0.140, and will be used in the SDT code, so, to
avoid bisection break on older systems, add a feature detection and
provide a stub with a pr_debug() to keep it building.

Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-80y0eldgweorqnwha9rvfxjr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:38:59 -03:00
Greg Kroah-Hartman 7813029a50 Merge 4.7-rc6 into staging-next
We want the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-04 08:15:03 -07:00
Masami Hiramatsu 4a0f65c102 perf probe: Remove caches when --cache is given
'perf probe --del' removes caches when '--cache' is given.  Note that
the delete pattern is not the same as for normal events.

If you cached probes with event name, --del "eventname" works as
expected. However, if you skipped it, the cached probes doesn't have
actual event name. In that case --del "probe-desc" is required (wildcard
is acceptable).  For example a cache entry has the probe-desc "vfs_read
$params", you can remove it with --del 'vfs_read*'.

  -----
  # perf probe --cache --list
  /[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
  vfs_read $params
  /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
  getaddrinfo $params

  # perf probe --cache --del vfs_read\*
  Removed cached event: probe:vfs_read

  # perf probe --cache --list
  /[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
  /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
  getaddrinfo $params
  -----

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736021651.27797.10250879847070772920.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01 11:34:57 -03:00
Masami Hiramatsu 1f3736c9c8 perf probe: Show all cached probes
perf probe --list shows all cached probes when --cache is given. Each
caches are shown with on which binary that probed. E.g.:

  -----
  # perf probe --cache vfs_read \$params
  # perf probe --cache -x /lib64/libc-2.17.so getaddrinfo \$params
  # perf probe --cache --list
  [kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
  vfs_read $params
  /usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
  getaddrinfo $params
  -----

Note that $params requires debuginfo.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736020674.27797.13488316780383460180.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01 11:34:57 -03:00
Masami Hiramatsu bc0622302f perf probe: Use cache entry if possible
Before analyzing debuginfo, try to find a corresponding entry from probe
cache always. This does not depend on --cache, the --cache enables to
store/update cache, but looking up the cache is always enabled.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736019226.27797.16366402884098398857.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-01 11:34:57 -03:00
Michael S. Tsirkin 59e6ae5324 ptr_ring: support resizing multiple queues
Sometimes, we need support resizing multiple queues at once. This is
because it was not easy to recover to recover from a partial failure
of multiple queues resizing.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01 05:32:17 -04:00
Jiri Olsa a24020e6b7 perf tools: Change cpu_map__fprintf output
Display cpu map in standard list form.  (perf report -D output on perf stat data).

before:
  0x590 [0x18]: PERF_RECORD_CPU_MAP nr: 4 cpus: 0, 1, 2, 3

after:
  0x590 [0x18]: PERF_RECORD_CPU_MAP: 0-3

Adding automated testcase.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:45 -03:00
Jiri Olsa 7fa9b8fba0 perf test: Add -F/--dont-fork option
Adding -F/--dont-fork option to bypass forking for each test. It's
useful for debugging test.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:45 -03:00
Jiri Olsa 8fbc38aaaf perf tests: Fix thread map test for -F option
I hit a bug when running test suite without forking each test (-F
option):

  $ perf test -Fv
  ...
  34: Test thread map                                          :
  --- start ---
  FAILED tests/thread-map.c:24 wrong comm
  ---- end ----
  Test thread map: FAILED!

The reason was the process name wasn't 'perf' as expected by the test,
because other tests set the name as well.

Setting it explicitly now.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:44 -03:00
Jiri Olsa f3069249e9 perf tools: Allow to reset open files counter
I hit a bug when running test suite without forking
each test (-F option):

  $ perf test -F dso
   8: Test dso data read                                       : Ok
   9: Test dso data cache                                      : FAILED!
  10: Test dso data reopen                                     : FAILED!

The reason the session file limit is set just once for
perf process so we need to reset it for each test,
otherwise wrong limit is taken into account.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:44 -03:00
Arnaldo Carvalho de Melo 3be28870c0 perf trace beauty eventfd: No need to include eventfd.h
Old systems such as RHEL5 lack this file, and what we need is
already under ifdefs, so just ditch this #include.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dzbjfllw6znuoy37skwnwa4r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:43 -03:00
Arnaldo Carvalho de Melo a41af25b3c perf trace beauty sched_policy: Define SCHED_RESET_ON_FORK for older systems
RHEL5 for instance doesn't have this one, help it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3adewnii78zi110eovfciopy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:43 -03:00
Peter Zijlstra (Intel) 135cce1bf1 perf annotate: Add number of samples to the header
Staring at annotations of large functions is useless if there's only a
few samples in them. Report the number of samples in the header to make
this easier to determine.

Committer note:

The change amounts to:

  - Percent | Source code & Disassembly of perf-vdso.so for cycles:u
  ------------------------------------------------------------------
  + Percent | Source code & Disassembly of perf-vdso.so for cycles:u (3278 samples)
  +--------------------------------------------------------------------------------

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 18:27:42 -03:00
Peter Zijlstra (Intel) 53dd9b5f95 perf annotate: Simplify header dotted line sizing
No need to use strlen, etc to figure that out, just use the return from
printf(), it will tell how wide the following line needs to be.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20160630082955.GA30921@twins.programming.kicks-ass.net
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 09:21:03 -03:00
Ravi Bangoria f4e47f9f7b perf evsel: Utility function to fetch arch
Add Utility function to fetch arch using evsel. (evsel->env->arch)

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1467267262-4589-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-30 08:37:32 -03:00
David S. Miller ee58b57100 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 05:03:36 -04:00
Ingo Molnar 54d5f16e55 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:

 - Documentation updates.  Just some simple changes, no design-level
   additions.

 - Miscellaneous fixes.

 - Torture-test updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-30 08:27:41 +02:00
Greg Kroah-Hartman 3c9a6793bd Second round of new iio device support, features and cleanups in the 4.8 cycle
Firstly some contact detail updates:
 * NXP took over freescale. Update the mma8452 header to reflect this.
 * Martin Kepplinger email address change in mma8452 header.
 * Adriana Reus has changed email address. Update .mailmap.
 * Matt Ranostay has changed email address. Update .mailmap.
 
 New Device Support
 * max1363
   - add the missing i2c_device_ids for a couple of parts so they can actually
     be used.
 * ms5867
   - add device ids for ms5805 and ms5837 parts.
 
 New Features
 * ad5755
   - DT support.  This one was a bit controversial and under review for a long
     time.  Still no one could come up with a better solution.
 * stx104
   - add gpio support
 * ti-adc081c
   - Add ACPI device ID matching.
 
 Core changes
 * Refuse to register triggers with duplicate names.  There is no way to
   distinguish between them so this makes no sense.  A few drivers do not
   generate unique names for each instance of the device present.  We can't
   fix this without changing ABI so leave them and wait for someone to
   actually take the rare step of two identical accelerometers on the same
   board.
 * buffer-dma
   - use ARRAY_SIZE in a few appropriate locations.
 
 Tools
 * Fix the fact that the --trigger-num option in generic_buffer didn't allow
   0 which is perfectly valid in the ABI.
 
 Cleanups
 * as3935
   - improve error reporting.
   - remove redundant zeroing of a field in iio_priv.
 * gp2ap020a00f
   - use the iio_device_claim_*_mode helpers rather than open coding locking
   around mode changes.
 * isl29125
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * lidar
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * mma8452
   - more detail in devices supported description in comments (addresses and
   similar)
 * sca3000
   - add a missing error check.
 * tcs3414
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * tcs3472
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdAT2AAoJEFSFNJnE9BaIq68P/3Z0q1lc1cb+K8HV5jgukEKw
 eoxZa5lFIOuHAGeXo9GAdJiH5oT/yAIhadf3gzuuQLaTJwWYKD51aPVwgpT5M2+x
 Bnu2XiYcaoIm/Foat70ycjeYaGxO/xO2vbLp5v0BJV2ujvjm/oCKw5pxYeU4Jm63
 iKaZo9jn/HoshOMpZBrcPZ7Q1TogRdopBNe2fsc8nXFFsv8ODjOZ9Nebs2lk36e+
 PWLUWfSkv2LMBSE2LOFyjSW8E4ItBBngBcyqBTFiiln7mpXU5Vv2QSvUhpP2YjUZ
 rxKvDiG7ADuxMr901whASxyCO180yCxTRIcBsN8oP73gTGHrJnMT0Sptfz7AUUVN
 gJneiy+iy3TecJ/R6w/DnNzqmZMiEVqlYGkdXVGu8SXrKWilvzcTp5iTmDVM5zLb
 1fDZxjbLdNJuHzoSYNiCBcnfzIixOAyKTGFi3jUaPPQ/Lc1qfmgerWWlOzKeUgCZ
 5Bzak8MvWuxcO7jkMG8mbARufy3Nu6eh8a39JXFhViGtTtySydMa8eXdYPjqoAtv
 vgwJNh9U53yYui8i7vU90dM3gJaGg5a4R6EjEKCYcEJf6kM9Go8xCvjU8YWPtIKk
 rfykpPkKcQzbax07YKvb4f015x7r0V6WCGJjPn0Fi14ugNGJJ6M88l+2UcXcx1zS
 RRtVRD49Le7pIDCs1Rqn
 =6Lja
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new iio device support, features and cleanups in the 4.8 cycle

Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.

New Device Support
* max1363
  - add the missing i2c_device_ids for a couple of parts so they can actually
    be used.
* ms5867
  - add device ids for ms5805 and ms5837 parts.

New Features
* ad5755
  - DT support.  This one was a bit controversial and under review for a long
    time.  Still no one could come up with a better solution.
* stx104
  - add gpio support
* ti-adc081c
  - Add ACPI device ID matching.

Core changes
* Refuse to register triggers with duplicate names.  There is no way to
  distinguish between them so this makes no sense.  A few drivers do not
  generate unique names for each instance of the device present.  We can't
  fix this without changing ABI so leave them and wait for someone to
  actually take the rare step of two identical accelerometers on the same
  board.
* buffer-dma
  - use ARRAY_SIZE in a few appropriate locations.

Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
  0 which is perfectly valid in the ABI.

Cleanups
* as3935
  - improve error reporting.
  - remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
  - use the iio_device_claim_*_mode helpers rather than open coding locking
  around mode changes.
* isl29125
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
  - more detail in devices supported description in comments (addresses and
  similar)
* sca3000
  - add a missing error check.
* tcs3414
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
2016-06-29 15:35:01 -07:00
Colin Ian King de8a63bd50 tools lib bpf: Fix spelling mistake: "missmatch" -> "mismatch"
Trivial fix to spelling mistake

Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1467116617-8318-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-29 10:07:34 -03:00
Andi Kleen d4897e1935 perf tools: Add documentation for perf.data on disk format
Add some documentation for the on disk format of perf.data. This is not
documenting the actual perf events -- which are documented in
perf_event.h -- but just the additional headers that perf record adds
around them when writing the data to disk.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1466800885-12974-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-29 10:07:23 -03:00
Wang Nan ebccba3fe0 perf data ctf: Generate fork and exit events to CTF output
If 'all' is selected, convert fork and exit events to output CTF stream.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:58 -03:00
Wang Nan 9e1a7ea19f perf data ctf: Add '--all' option for 'perf data convert'
After this patch, 'perf data convert' convert comm events to output CTF
stream.

Result:

  # perf record -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.378 MB perf.data (73 samples)  ]

  # perf data convert --to-ctf ./out.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
  [ perf data convert: Converted and wrote 0.003 MB (73 samples) ]

  # babeltrace --clock-seconds ./out.ctf/
  [10627.402515791] (+?.?????????) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  [10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  ...    // only sample event is converted

  # perf data convert --all --to-ctf ./out.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
  [ perf data convert: Converted and wrote 0.023 MB (73 samples, 384 non-samples) ]

  # babeltrace --clock-seconds ./out.ctf/
  [  0.000000000] (+?.?????????) perf_comm: { cpu_id = 0 }, { pid = 1, tid = 1, comm = "init" }
  [  0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 2, tid = 2, comm = "kthreadd" }
  [  0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 3, tid = 3, comm = "ksoftirqd/0" }
  ...    // comm events are converted
  [10627.402515791] (+10627.402515791) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  [10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
  ...    // samples are also converted

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:57 -03:00
Wang Nan f5a08ceda5 perf data ctf: Generate comm event to CTF output
If 'all' is selected, convert comm event to output CTF stream.

setup_non_sample_events() is called if non_sample is selected. It
creates a comm_class for comm event.

Use macros to generate and process_comm_event and add_comm_event. These
macros can be reused for other non-sample events.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:57 -03:00
Wang Nan 8ee4c46c5e perf data ctf: Prepare collect non-sample events
Following commits are going to allow 'perf data convert' to collect not
only samples, but also non-sample events like comm and fork. In this
patch we count non-sample events using c.non_sample_count, and prepare
to print number of both type of events like:

  # ~/perf data convert --all --to-ctf ./out.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
  [ perf data convert: Converted and wrote 0.846 MB (6508 samples, 686 non-samples) ]

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:56 -03:00
Wang Nan f02a6489d1 perf data ctf: Add 'all' option
If 'all' option is selected, 'perf data convert' should convert not only
samples, but non-sample events such as comm and fork. Add this option in
perf_data_convert_opts. Following commits will add cmdline option to
select it.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:56 -03:00
Wang Nan 3275f68e50 perf data ctf: Pass convert options through opts structure
Following commits will add new option to 'perf data convert'. All options
should be grouped into a structure and passed to low level converter
(currently there's only one converter).

Introduce data-convert.h and define 'struct perf_data_convert_opts' in
it. Pass 'force' through opts.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:55 -03:00
Wang Nan 069ee5c488 perf data ctf: Add value_set_string() helper
There are many value_set_##x helper for integer, but only for integer.
This patch adds value_set_string() helper to help following commits
create string fields.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:55 -03:00
Jiri Olsa ed7b630b31 perf symbols: Use proper dso name for is_regular_file
Marc reported use of uninitialized memory:

> In commit "403567217d3f perf symbols: Do not read symbols/data from
> device files" a check to uninitialzied memory was added. This leads to
> the following valgrind output:
>
>  ==24515== Syscall param stat(file_name) points to uninitialised byte(s)
>  ==24515==    at 0x75B26D5: _xstat (in /lib/x86_64-linux-gnu/libc-2.22.so)
>  ==24515==    by 0x4E548D: stat (stat.h:454)
>  ==24515==    by 0x4E548D: is_regular_file (util.c:687)
>  ==24515==    by 0x4A5BEE: dso__load (symbol.c:1435)
>  ==24515==    by 0x4BB1AE: map__load (map.c:289)
>  ==24515==    by 0x4BB1AE: map__find_symbol (map.c:333)
>  ==24515==    by 0x4835B3: thread__find_addr_location (event.c:1300)
>  ==24515==    by 0x4B5342: add_callchain_ip (machine.c:1652)
>  ==24515==    by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906)
>  ==24515==    by 0x4B9E7D: thread__resolve_callchain (machine.c:1958)
>  ==24515==    by 0x441B3E: process_event (builtin-script.c:795)
>  ==24515==    by 0x441B3E: process_sample_event (builtin-script.c:920)
>  ==24515==    by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192)
>  ==24515==    by 0x4BEE29: machines__deliver_event (session.c:1229)
>  ==24515==    by 0x4BF770: perf_session__deliver_event (session.c:1286)
>  ==24515==    by 0x4BF770: ordered_events__deliver_event (session.c:114)
>  ==24515==    by 0x4C1D17: __ordered_events__flush (ordered-events.c:207)
>  ==24515==    by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274)
>  ==24515==    by 0x4BF44C: perf_session__process_user_event (session.c:1325)
>  ==24515==    by 0x4BF44C: perf_session__process_event (session.c:1451)
>  ==24515==  Address 0x807c6a0 is 0 bytes inside a block of size 4,096 alloc'd
>  ==24515==    at 0x4C29C0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
>  ==24515==    by 0x4A5BCB: dso__load (symbol.c:1421)
>  ==24515==    by 0x4BB1AE: map__load (map.c:289)
>  ==24515==    by 0x4BB1AE: map__find_symbol (map.c:333)
>  ==24515==    by 0x4835B3: thread__find_addr_location (event.c:1300)
>  ==24515==    by 0x4B5342: add_callchain_ip (machine.c:1652)
>  ==24515==    by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906)
>  ==24515==    by 0x4B9E7D: thread__resolve_callchain (machine.c:1958)
>  ==24515==    by 0x441B3E: process_event (builtin-script.c:795)
>  ==24515==    by 0x441B3E: process_sample_event (builtin-script.c:920)
>  ==24515==    by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192)
>  ==24515==    by 0x4BEE29: machines__deliver_event (session.c:1229)
>  ==24515==    by 0x4BF770: perf_session__deliver_event (session.c:1286)
>  ==24515==    by 0x4BF770: ordered_events__deliver_event (session.c:114)
>  ==24515==    by 0x4C1D17: __ordered_events__flush (ordered-events.c:207)
>  ==24515==    by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274)
>  ==24515==    by 0x4BF44C: perf_session__process_user_event (session.c:1325)
>  ==24515==    by 0x4BF44C: perf_session__process_event (session.c:1451)
>  ==24515==    by 0x4C0EAC: __perf_session__process_events (session.c:1804)
>  ==24515==    by 0x4C0EAC: perf_session__process_events (session.c:1858)

The reason was a typo that passed global 'name' variable as the
is_regular_file argument instead dso->long_name.

Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 403567217d ("perf symbols: Do not read symbols/data from device files")
Link: http://lkml.kernel.org/r/1466772025-17471-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:54 -03:00
Wang Nan ee667f947c perf record: Prepare picking perf_event_mmap_page from multiple evlists
Following commits introduce new evlists to record. This patch adjusts
record__pick_pc() and introduces perf_evlist__pick_pc() to read control
page from one specific evlist. record__pick_pc() will be improved to
search control page from multiple evlists.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467023052-146749-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:54 -03:00
Wang Nan cb21686b7d perf record: Prepare reading from multiple evlists in record__mmap_read_all()
Following commits introduce new evlists to record. This patch adjusts
record__mmap_read_all() and record__mmap_read(): converting original
record__mmap_read_all() to record__mmap_read_evlist(), read from one
evlist; makes record__mmap_read() reading from specific evlist.
record__mmap_read_all() will be improved to read from multiple evlists.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467023052-146749-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:53 -03:00
Wang Nan cda57a8c74 perf record: Move mmap setup block to separate function
Following commits introduce multiple evlists to record. This patch
extracts perf_evlist__mmap_ex() processing to a new function, creates
record__mmap() and record__mmap_evlist() to wrap perf_evlist__mmap_ex()
and its error processing. They will be improvemented to create mmap for
all evlists.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1467023052-146749-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:53 -03:00
Jiri Olsa f6c12a004c perf data convert: Include config.h header
Otherwise some compiler might scream:

  $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ LIBBABELTRACE=1
    BUILD:   Doing 'make -j4' parallel build
    CC       util/data-convert-bt.o
  util/data-convert-bt.c: In function ‘convert__config’:
  util/data-convert-bt.c:1299:19: error: implicit declaration of function ‘perf_config_u64’ [-Werror=implicit-function-declaration]
     c->queue_size = perf_config_u64(var, value);
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 41840d211c ("perf config: Move config declarations from util/cache.h to util/config.h")
Link: http://lkml.kernel.org/r/1466772025-17471-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:52 -03:00
Wang Nan f5ce45736b perf build: Add libbabeltrace to build-test
'make build-test' doesn't test LIBBABELTRACE=1. It misses a building
failure caused by commit 41840d211c ("perf config: Move config
declarations from util/cache.h to util/config.h"), breaks bisect.

Add LIBBABELTRACE=1 to build-test.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466818918-131281-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28 10:54:52 -03:00
Andy Shevchenko ac485cb4b3 tools/turbostat: allow user to alter DESTDIR and PREFIX
When run
	make -C tools DESTDIR=/my/nice/dir turbostat_install
get a message
	install: cannot create regular file '/usr/bin/turbostat': Permission denied

Allow user to alter DESTDIR and PREFIX variables.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-28 00:37:04 +02:00
Shuah Khan cde07f453b selftests: media_tests - Add media_device_open to .gitignore
Add media_device_open to .gitignore

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:30:23 -06:00
Shuah Khan fe8777a8a0 selftests: add media controller regression test scripts and document
Add regression test scripts open_loop_test.sh, and bind_unbind_sample.sh.
Also add regression_test.txt that describes the regression test procedure.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:29:52 -06:00
Shuah Khan b96da0fc54 selftests: add media_device_open test
Add a new media test to open, run ioctl, and close the media device file.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:21:33 -06:00
Shuah Khan e9c0d44f53 selftests: media_device_test change it to randomize loop count
Change it to randomize the loop count instead of hardcoded number of times
ioctl is called.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:21:26 -06:00
Yannick Brosseau bff124682e selftests/vm: Don't mlockall MCL_CURRENT in on-fault-limit test
The default MEMLOCK limit is not big enough to accomodate all the
current pages of the test program process, so the test fails
at this step.
By removing the MCL_CURRENT flag, we allow the mlockall
call to succeed. The mmap is twice the size of the current limit,
so it will still fail as expected.

Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:19:24 -06:00
Yannick Brosseau ee65735dd5 selftests/vm: write strlen length instead of sizeof to nr_hugepages
When setting back the initial value to nr_hugepages, the
test was writing a length sizeof of the string and checking
that strlen was writen. Since those values are not the same,
use strlen in both place instead.

Also make the error messages more explicit to help in future
debugging.

Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:18:26 -06:00
SeongJae Park 3aefd1febd selftests/lib: set printf.sh executable
Test for test_printf module fails always because the test program,
printf.sh, has no execution permission.  This commit adds execution
permission to it.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-27 13:17:14 -06:00
Dan Williams ee8520fe8c tools/testing/nvdimm: replace CONFIG_DMA_CMA dependency with vmalloc()
DMA_CMA is incompatible with SWIOTLB used in enterprise distro
configurations.  Switch to vmalloc() allocations for all resources.

Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-27 11:40:46 -07:00
Ravi Bangoria 78f69b5865 perf tools: Add more toolchain triplets
Add few more triplets based on Fedora and Ubuntu binutils (cross tools).

Before applying patch on x86:

  ( Install binutils-powerpc64-linux-gnu.x86_64 )
  $ perf report -i perf.data.powerpc --vmlinux vmlinux.powerpc \
      --objdump powerpc64-linux-gnu-objdump

After applying patch on x86:

  $ perf report -i perf.data.powerpc --vmlinux vmlinux.powerpc

I.e. it will find the right objdump from the environment data recorded
in the perf.data file + these triplets.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-7-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-27 14:31:41 -03:00
Naveen N. Rao 6ef9492915 perf annotate: Generalize handling of 'ret' instructions
Introduce helper to detect 'ret' instructions and use the same in the TUI.
A helper is needed since some architectures such as powerpc have more
than one return instruction.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-27 14:25:05 -03:00
Neeraj Badlani 9f776ba11c perf tools: Update makefile message for installing slang devel package
In case of missing library (libslang), give hint to install library
(libslang2-dev), since libslang-dev is not provided by Ubuntu.

Signed-off-by: Neeraj Badlani <neerajbadlani@gmail.com>
Link: http://lkml.kernel.org/r/1467035997-9100-1-git-send-email-neerajbadlani@gmail.com
[ removed excessive 'or' usage ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-27 12:44:22 -03:00
Ravi Bangoria f2f4fe4410 perf annotate: Remove unused hist_entry__annotate function
hist_entry__annotate looks part of API but I don't find any caller
of this function. Removing it.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-27 10:58:50 -03:00
Ingo Molnar 8114e90ea4 Linux 4.7-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXcHi9AAoJEHm+PkMAQRiGSJ0H/2o4t9VWYmhyPC1sdIHoCExJ
 P4tBrcZYBmKcsOmIfnJDa5g/+IdhouEUM0v0fHPogS2UUWT9eRuJWYD3sY+HpEQ+
 heKTli8X73gsFB25odeIbIt0jAoSiiMYWDrWqLNsuUV1tjEYVA8rH0SM94FiOC/5
 7WVWXLTuH+Rm7JHP18BnKxmMMbzrTFmwisLMqFKyfZRRSlS+/ix7iLUNO9AFa39B
 YHxNPihLrZ0oONyCOAQoHTIXXrw0cQbxV2utg3vnMcCZdme2xOn+iXMntTSKfZ39
 iC9/T0vsO3R6OrRo2aDZAnCPUAniXnMEIhrKG37WMyXpj6cucZ/2QiNXcXviGV4=
 =iLte
 -----END PGP SIGNATURE-----

Merge tag 'v4.7-rc5' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-27 11:20:46 +02:00
Andrey Smirnov 0a553cbabd rtc: rtctest: Change no IRQ detection for RTC_IRQP_SET
A call to ioctl(..., RTC_IRQP_SET, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-26 23:43:54 +02:00
Andrey Smirnov 519efa9805 rtc: rtctest: Change no IRQ detection for RTC_IRQP_READ
A call to ioctl(..., RTC_IRQP_READ, ...) should never result in
ENOTTY. All new style RTC drivers implement it and all of the old style
drivers return EINVAL when they don't support periodic IRQs.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-26 23:43:49 +02:00
Andrey Smirnov cd26fca202 rtc: rtctest: Change alarm IRQ support detection
For old style drivers, call a call to ioctl(..., RTC_ALM_SET, ...):

    - char/ds1302.c will always return -EINVAL
    - char/genrtc.c: will always return -EINVAL
    - char/rtc.c will succeed regardless if IRQs are supported or not
    - char/efirtc.c will always return -EINVAL
    - input/misc/hp_sdc_rtc.c ... that ioctl code is a good lesson about
      ifdefing code out and punting implementation ... and it will
      always return -EINVAL

For new style rtc drivers, a call to ioctl(..., RTC_ALM_SET, ...) never
results in a call to __rtc_set_alarm, since struct rtc_wkalarm passed to
rtc_set_alarm has 'enabled' field set to 0. This means that
rtc->ops->set_alarm driver hook is never called in that ioctl. Since no
driver code interaction happens as a part of that call, using its
results to ascertain properties of the driver is not going to work. To
remedy this - use the result of RTC_AIE_ON to make the judgement.

This patch also changes ENOTTY to EINVAL as an error code value that
would tell us that IRQs are not supported. There are three reason for
this:

 - As mentioned above old style driver never returns ENOTTY for this
   ioctl

 - In it's code __rtc_set_alarm() returns -EINVAL if rtc->ops->set_alarm
   method is not provided by the driver, so one reason for change is to
   be consistent with that code path.

 - A call to ioctl(..., RTC_UIE_ON, ...) will result in a call to
   rtc_update_irq_enable() and then __rtc_set_alarm(), which, if IRQs
   are not supported by the driver, will result in a non-zero error
   code. Returning ENOTTY in that case would:

   	 a) Not be consistent with other codepaths of
   	 rtc_update_irq_enable, for example the check of
   	 rtc->uie_unsupported

	 b) Would break update IRQ emulation code since that codpath
	 expects EINVAL

	 c) Would break test's logic for feature support detection in
	 the case of RTC_UIE_ON ioctl

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-26 23:43:44 +02:00
Colin Ian King 7c5b723946 tools/vm/slabinfo: fix spelling mistake: "Ocurrences" -> "Occurrences"
trivial fix to spelling mistake

Link: http://lkml.kernel.org/r/1466672144-831-1-git-send-email-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24 17:23:52 -07:00
Mike Kravetz a7b50abc90 selftests/vm/compaction_test: fix write to restore nr_hugepages
The write at the end of the test to restore nr_hugepages to its previous
value is failing.  This is because it is trying to write the number of
bytes in the char array as opposed to the number of bytes in the string.

Link: http://lkml.kernel.org/r/1465331205-3284-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24 17:23:52 -07:00
Dan Williams f295e53b60 libnvdimm, pmem: allow nfit_test to override pmem_direct_access()
Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to
override it and indicate that nfit_test-pmem is not device-mapped.  Now,
we want to enable nfit_test to operate without DMA_CMA and the pmem it
provides will no longer be physically contiguous, i.e. won't be capable
of supporting direct_access requests larger than a page.  Make
pmem_direct_access() a weak symbol so that it can be replaced by the
tools/testing/nvdimm/ version, and move phys_to_pfn_t() to a static
inline now that it no longer needs to be overridden.

Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-24 11:39:29 -07:00
Taeung Song 4a35b3497c perf config: Reimplement show_config() using config_set__for_each
Recently config_set__for_each got added.  In order to let show_config()
be short and clear, rewrite this function using it.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466691272-24117-4-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 17:23:00 -03:00
Taeung Song 8a0a9c7e91 perf config: Introduce new init() and exit()
Many sub-commands use perf_config() but everytime perf_config() is
called, perf_config() always read config files.  (i.e. user config
'~/.perfconfig' and system config '$(sysconfdir)/perfconfig')

But it is better to use the config set that already contains all config
key-value pairs to avoid this repetitive work reading the config files
in perf_config(). (the config set mean a static variable 'config_set')

In other words, if new perf_config__init() is called, only first time
'config_set' is initialized collecting all configs from the config
files.  And then we could use new perf_config() like old perf_config().
When a sub-command finished, free the config set by perf_config__exit()
at run_builtin().

If we do, 'config_set' can be reused wherever perf_config() is called
and a feature of old perf_config() is the same as new perf_config() work
without the repetitive work that read the config files.

In summary, in order to use features about configuration,
we can call the functions at perf.c and other source files as below.

    # initialize a config set
    perf_config__init()

    # configure actual variables from a config set
    perf_config()

    # eliminate allocated config set
    perf_config__exit()

    # destroy existing config set and initialize a new config set.
    perf_config__refresh()

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466691272-24117-3-git-send-email-treeze.taeung@gmail.com
[ 'init' counterpart is 'exit', not 'finish' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 17:20:04 -03:00
Adrian Hunter e216708d98 perf script: Add callindent option
Based on patches from Andi Kleen.

When printing PT instruction traces with perf script it is rather useful
to see some indentation for the call tree. This patch adds a new
callindent field to perf script that prints spaces for the function call
stack depth.

We already have code to track the function call stack for PT, that we
can reuse with minor modifications.

The resulting output is not quite as nice as ftrace yet, but a lot
better than what was there before.

Note there are some corner cases when the thread stack gets code
confused and prints incorrect indentation. Even with that it is fairly
useful.

When displaying kernel code traces it is recommended to run as root, as
otherwise perf doesn't understand the kernel addresses properly, and may
not reset the call stack correctly on kernel boundaries.

Example output:

	sudo perf-with-kcore record eg2 -a -e intel_pt// -- sleep 1
	sudo perf-with-kcore script eg2 --ns -F callindent,time,comm,pid,sym,ip,addr,flags,cpu --itrace=cre | less
	...
         swapper     0 [000]  5830.389116586:   call        irq_exit                                                     ffffffff8104d620 smp_call_function_single_interrupt+0x30 => ffffffff8107e720 irq_exit
         swapper     0 [000]  5830.389116586:   call            idle_cpu                                                 ffffffff8107e769 irq_exit+0x49 => ffffffff810a3970 idle_cpu
         swapper     0 [000]  5830.389116586:   return          idle_cpu                                                 ffffffff810a39b7 idle_cpu+0x47 => ffffffff8107e76e irq_exit
         swapper     0 [000]  5830.389116586:   call            tick_nohz_irq_exit                                       ffffffff8107e7bd irq_exit+0x9d => ffffffff810f2fc0 tick_nohz_irq_exit
         swapper     0 [000]  5830.389116919:   call                __tick_nohz_idle_enter                               ffffffff810f2fe0 tick_nohz_irq_exit+0x20 => ffffffff810f28d0 __tick_nohz_idle_enter
         swapper     0 [000]  5830.389116919:   call                    ktime_get                                        ffffffff810f28f1 __tick_nohz_idle_enter+0x21 => ffffffff810e9ec0 ktime_get
         swapper     0 [000]  5830.389116919:   call                        read_tsc                                     ffffffff810e9ef6 ktime_get+0x36 => ffffffff81035070 read_tsc
         swapper     0 [000]  5830.389116919:   return                      read_tsc                                     ffffffff81035084 read_tsc+0x14 => ffffffff810e9efc ktime_get
         swapper     0 [000]  5830.389116919:   return                  ktime_get                                        ffffffff810e9f46 ktime_get+0x86 => ffffffff810f28f6 __tick_nohz_idle_enter
         swapper     0 [000]  5830.389116919:   call                    sched_clock_idle_sleep_event                     ffffffff810f290b __tick_nohz_idle_enter+0x3b => ffffffff810a7380 sched_clock_idle_sleep_event
         swapper     0 [000]  5830.389116919:   call                        sched_clock_cpu                              ffffffff810a738b sched_clock_idle_sleep_event+0xb => ffffffff810a72e0 sched_clock_cpu
         swapper     0 [000]  5830.389116919:   call                            sched_clock                              ffffffff810a734d sched_clock_cpu+0x6d => ffffffff81035750 sched_clock
         swapper     0 [000]  5830.389116919:   call                                native_sched_clock                   ffffffff81035754 sched_clock+0x4 => ffffffff81035640 native_sched_clock
         swapper     0 [000]  5830.389116919:   return                              native_sched_clock                   ffffffff8103568c native_sched_clock+0x4c => ffffffff81035759 sched_clock
         swapper     0 [000]  5830.389116919:   return                          sched_clock                              ffffffff8103575c sched_clock+0xc => ffffffff810a7352 sched_clock_cpu
         swapper     0 [000]  5830.389116919:   return                      sched_clock_cpu                              ffffffff810a7356 sched_clock_cpu+0x76 => ffffffff810a7390 sched_clock_idle_sleep_event
         swapper     0 [000]  5830.389116919:   return                  sched_clock_idle_sleep_event                     ffffffff810a7391 sched_clock_idle_sleep_event+0x11 => ffffffff810f2910 __tick_nohz_idle_enter
	...

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 17:04:26 -03:00
Adrian Hunter 50f736372d perf auxtrace: Add option to feed branches to the thread stack
In preparation for using the thread stack to print an indent
representing the stack depth in perf script, add an option to tell
decoders to feed branches to the thread stack. Add support for that
option to Intel PT and Intel BTS.

The advantage of using the decoder to feed the thread stack is that it
happens before branch filtering and so can be used with different itrace
options (e.g. it still works when only showing calls, even though the
thread stack needs to see calls and returns). Also it does not conflict
with using the thread stack to get callchains.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 17:02:59 -03:00
Adrian Hunter 055cd33d93 perf script: Print sample flags more nicely
The flags field is synthesized and may have a value when Instruction
Trace decoding. The flags are "bcrosyiABEx" which stand for branch,
call, return, conditional, system, asynchronous, interrupt, transaction
abort, trace begin, trace end, and in transaction, respectively.

Change the display so that known combinations of flags are printed more
nicely e.g.: "call" for "bc", "return" for "br", "jcc" for "bo", "jmp"
for "b", "int" for "bci", "iret" for "bri", "syscall" for "bcs",
"sysret" for "brs", "async" for "by", "hw int" for "bcyi", "tx abrt" for
"bA", "tr strt" for "bB", "tr end" for "bE".

However the "x" flag will be displayed separately in those cases e.g.
"jcc (x)" for a condition branch within a transaction.

Example:

    perf record -e intel_pt//u ls
    perf script --ns -F comm,cpu,pid,tid,time,ip,addr,sym,dso,symoff,flags
    ...
    ls  3689/3689  [001]  2062.020965237:   jcc          7f06a958847a _dl_sysdep_start+0xfa (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a9588450 _dl_sysdep_start+0xd0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965237:   jmp          7f06a9588461 _dl_sysdep_start+0xe1 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a95885a0 _dl_sysdep_start+0x220 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965237:   jmp          7f06a95885a4 _dl_sysdep_start+0x224 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a9588470 _dl_sysdep_start+0xf0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965904:   call         7f06a95884c3 _dl_sysdep_start+0x143 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a9589140 brk+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020965904:   syscall      7f06a958914a brk+0xa (/lib/x86_64-linux-gnu/ld-2.19.so) =>                0 [unknown] ([unknown])
    ls  3689/3689  [001]  2062.020966237:   tr strt                 0 [unknown] ([unknown]) =>     7f06a958914c brk+0xc (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   return       7f06a9589165 brk+0x25 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a95884c8 _dl_sysdep_start+0x148 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   jcc          7f06a95884d7 _dl_sysdep_start+0x157 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   call         7f06a95885f0 _dl_sysdep_start+0x270 (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a958ac50 strlen+0x0 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ls  3689/3689  [001]  2062.020966237:   jcc          7f06a958ac6e strlen+0x1e (/lib/x86_64-linux-gnu/ld-2.19.so) =>     7f06a958ac60 strlen+0x10 (/lib/x86_64-linux-gnu/ld-2.19.so)
    ...

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1466689258-28493-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 16:36:59 -03:00
Arnaldo Carvalho de Melo 10daf4d01b perf intlist: Rename for_each() macros to for_each_entry()
To match the semantics for list.h in the kernel, that are the
interface we use in them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mdp1heu9xjjc12zebh91232l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 11:39:19 -03:00
Arnaldo Carvalho de Melo 98a91837dd perf rb_resort: Rename for_each() macros to for_each_entry()
To match the semantics for list.h in the kernel, that are the
interface we use in them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-iaxuq2yu43mtb504j96q0axs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 11:35:07 -03:00
Arnaldo Carvalho de Melo 602a1f4daa perf tools: Rename strlist_for_each() macros to for_each_entry()
To match the semantics for list.h in the kernel, that are the
interface we use in them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0b5i2ki9c3di6706fxpticsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 11:35:01 -03:00
Arnaldo Carvalho de Melo e5cadb93d0 perf evlist: Rename for_each() macros to for_each_entry()
To match the semantics for list.h in the kernel, that are used to
implement those macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 11:26:15 -03:00
Andy Shevchenko a3bcf2d45d tools/acpi: use CROSS_COMPILE to define prefix
CROSS_COMPILE can be considered as standard definition for toolchain prefix
when cross-compiling. Use it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-23 15:32:16 +02:00
He Kuang 3bd03c9583 perf unwind: Fix wrongly used regs for aarch64 unwind
By default, "unwind-libunwind-local.c" gets SP/IP register number
according to the host platform, for remote unwind, we should use
register number for target platform. Fix this by define
LIBUNWIND_ARCH_REG_SP/IP in the wrapper file of aarch64 platform.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466578626-92406-4-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 10:30:31 -03:00
He Kuang 5dafea097a perf unwind: Fix wrongly used regs for x86_32 unwind
By default, "unwind-libunwind-local.c" gets SP/IP register number
according to the host platform, for remote unwind, we should use
register number for target platform. Fix this by define
LIBUNWIND_ARCH_REG_SP/IP in the wrapper file of x86_32 platform.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466578626-92406-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 10:30:21 -03:00
He Kuang 78ff1d6d8b perf unwind: Change macro names of perf register
Use macro name prefixed with "LIBUNWIND_ARCH" for better understanding
that the regs used by callbacks of libunwind are arch specific. The real
regs used should be defined in the wrapper file of
"unwind-libunwind-local.c" for each supported arch.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466578626-92406-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 10:30:17 -03:00
He Kuang 76c588f1f6 perf tools: Find right DSO taking into account if binary is 32 or 64-bit
There's a problem in machine__findnew_vdso(), vdso buildid generated by a
32-bit machine stores it with the name 'vdso', but when processing buildid on a
64-bit machine with the same 'perf.data', perf will search for vdso named as
'vdso32' and get failed.

This patch tries to find the existing dsos in machine->dsos by thread dso_type.
64-bit thread tries to find vdso with name 'vdso', because all 64-bit vdso is
named as that. 32-bit thread first tries to find vdso with name 'vdso32' if
this thread was run on 64-bit machine, if failed, then it tries 'vdso' which
indicates that the thread was run on 32-bit machine when recording.

Committer note:

Additional explanation by Adrian Hunter:

We match maps to builds ids using the file name - consider
machine__findnew_[v]dso() called in map__new().  So in the context of a perf
data file, we consider the file name to be unique.

A vdso map does not have a file name - all we know is that it is vdso.  We look
at the thread to tell if it is 32-bit, 64-bit or x32.  Then we need to get the
build id which has been recorded using short name "[vdso]" or "[vdso32]" or
"[vdsox32]".

The problem is that on a 32-bit machine, we use the name "[vdso]".  If you take
a 32-bit perf data file to a 64-bit machine, it gets hard to figure out if
"[vdso]" is 32-bit or 64-bit.

This patch solves that problem.

 ----

This also merges a followup patch fixing a problem introduced by the
original submission of this patch, that would crash 'perf record' when
recording samples for a 32-bit app on a 64-bit system.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463475894-163531-1-git-send-email-hekuang@huawei.com
Link: http://lkml.kernel.org/r/1466578626-92406-6-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 10:25:58 -03:00
Taeung Song 41840d211c perf config: Move config declarations from util/cache.h to util/config.h
Lately util/config.h has been added but util/cache.h has declarations of
functions and a global variable for config features.

To manage codes about configuration at one spot, move them to
util/config.h and let source files that need config features include
config.h And if the source files that included previous cache.h need
only config.h, remove including cache.h.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466672119-4852-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 08:51:41 -03:00
Andy Shevchenko 5349910928 tools/gpio: add install section
Allow user to call install target.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23 11:07:13 +02:00
Andy Shevchenko 8674cea84d tools/gpio: move to tools buildsystem
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree.
Switch gpio target to be built by it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23 11:07:13 +02:00
He Kuang 48d8d5db4a perf tools: Let python use correct gcc for build_ext
Currently, python uses host gcc instead of cross-compile gcc in the last
step of compiling build_ext(remove '--quiet' to show verbose):

  cross-gcc ...
  cross-gcc ...
  creating ~/out/python_ext_build/lib
  gcc -pthread -shared -Wl,-z ...

This is wrong but may not cause any errors unless the features detected
by cross-compiler do not match those for host compiler, and causes the
following errors:

  /usr/lib64/gcc/bin/ld: cannot find -lunwind-x86
  collect2: error: ld returned 1 exit status
  error: command 'gcc' failed with exit status 1
  cp: cannot stat ‘~/out/python_ext_build/lib/perf.so’: No such file or directory
  Makefile.perf:257: recipe for target '~/out/python/perf.so' failed
  make[1]: *** [~/out/python/perf.so] Error 1
  Makefile:68: recipe for target 'all' failed
  make: *** [all] Error 2

This issue is also reported and anwsered on stackoverflow.
Link: http://stackoverflow.com/questions/5986256/python-distutils-gcc-path

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466578626-92406-5-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 16:11:42 -03:00
Arnaldo Carvalho de Melo 32ca678dcd perf machine: Destructors should accept NULL
And do nothing, just like free(), to avoid having to test it in callers,
usually in error paths.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q42gj3b3znhho9z1mrbo4jce@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 10:19:11 -03:00
Arnaldo Carvalho de Melo 61b3f66a3f perf tests time-to-tsc: No need to disable an event before deleting it
Because at the destructor we will call close() and that will do the
disable. And we destructors can accept NULL, just like free(), so no
need to check it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-i98mcyfkkjh5qp62dle27ac1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 10:10:52 -03:00
Arnaldo Carvalho de Melo e1446551e6 perf session: Destructors should accept NULL
And do nothing, just like free(), to avoid having to test it in callers,
usually in error paths.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dyuupcj0hnoyt96vma8b3anv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 10:02:16 -03:00
Arnaldo Carvalho de Melo 0b04b3dcdf perf evlist: Destructors should accept NULL
And do nothing, just like free(), to avoid having to test it in callers,
usually in error paths.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mexbavy0ft387j5w89t365eu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 10:01:48 -03:00
Jiri Olsa 89c7cb2cad perf hists: Enlarge pid sort entry size
The pid sort entry currently aligns pids with 5 digits, which is not
enough for current 4 million pids limit.

This leads to unaligned ':' header-data output when we display 7 digits
pid:

  # Children      Self  Symbol                    Pid:Command
  # ........  ........  ......................  .....................
  #
       0.12%     0.12%  [.] 0x0000000000147e0f  2052894:krava
  ...

Adding 2 more digit to properly align the pid limit:

  # Children      Self  Symbol                      Pid:Command
  # ........  ........  ......................  .......................
  #
       0.12%     0.12%  [.] 0x0000000000147e0f  2052894:krava

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa fcd8642650 perf hists browser: Introduce init()
Factoring out the hist_browser initialization code, so it could be used
from other parts in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa a6ec894dea perf hists browser: Introduce perf_evsel_browser constructor
So we could use hist_browser__new for generic hist browser in following
patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa b1c7a8f7a1 perf hists browser: Move horizontal scroll init to new()
Moving horizontal scroll init to initialization function as already
intended.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:35 -03:00
Jiri Olsa 5b91a86f47 perf hists browser: Introduce struct hist_browser title callback
We can now setup title callback for hist_browser, which will be useful
in following changes to create customized hist_browsers.

This also separates struct perf_evsel dependency out of hist_browser
basic code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Jiri Olsa dabd201239 perf hists browser: Make (new|delete|run) public
This way we can use it outside of ui/browsers/hists.c and extend it in
following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Jiri Olsa f758990f25 perf hists browser: Move hist_browser into header file
This way we can use it outside of ui/browsers/hists.c and extend it in
following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Arnaldo Carvalho de Melo dd4629d46c perf script stackcollapse: Remove reference to the perl interpreter
It is ignored and this is actually a python script, not a perl one.

Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/n/tip-0w4bpbqd79v3sl34jvpr11v0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-22 09:56:34 -03:00
Paolo Bonzini 6745d8ea82 perf script: Add stackcollapse.py script
Add stackcollapse.py script as an example of parsing call chains, and
also of using optparse to access command line options.

The flame graph tools include a set of scripts that parse output from
various tools (including "perf script"), remove the offsets in the
function and collapse each stack to a single line.  The website also
says "perf report could have a report style [...] that output folded
stacks directly, obviating the need for stackcollapse-perf.pl", so here
it is.

This script is a Python rewrite of stackcollapse-perf.pl, using the perf
scripting interface to access the perf data directly from Python.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Brendan Gregg <bgregg@netflix.com>
Link: http://lkml.kernel.org/r/1460467573-22989-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:35 -03:00
Arnaldo Carvalho de Melo 7da36e94e7 perf evsel: Fix write_backwards fallback
Commit b90dc17a5d "perf evsel: Add overwrite attribute and check
write_backward" misunderstood the 'order' should be obeyed in
__perf_evsel__open.

But the way this was done for attr.write_backwards was buggy, as we need
to check features in the inverse order of their introduction to the
kernel, so that a newer tool checks first the newest perf_event_attr
fields, detecting that the older kernel doesn't have support for them.

Also, we can avoid calling sys_perf_event_open() if we have already
detected the missing of write_backward.

Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: b90dc17a5d ("perf evsel: Add overwrite attribute and check write_backward")
Link: http://lkml.kernel.org/r/1466419645-75551-2-git-send-email-wangnan0@huawei.com
Link: http://lkml.kernel.org/r/20160616214724.GI13337@kernel.org
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:35 -03:00
Wang Nan 0aab21363f perf record: Add --dry-run option to check cmdline options
With '--dry-run', 'perf record' doesn't do reall recording. Combine with
llvm.dump-obj option, --dry-run can be used to help compile BPF objects
for embedded platform.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466064161-48553-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:35 -03:00
Wang Nan f078464925 perf llvm: Allow dump llvm output object file using llvm.dump-obj
Add a 'llvm.dump-obj' config option to enable perf dump BPF object files
compiled by LLVM.

This option is useful when using BPF objects in embedded platforms.
LLVM compiler won't be deployed in these platforms, and currently we
don't support dynamic compiling library.

Before this patch users have to explicitly issue llvm commands to
compile BPF scripts, and can't use helpers (like include path detection
and default macros) in perf. With this option, user is allowed to use
perf to compile their BPF objects then copy them into their embedded
platforms.

Committer notice:

Testing it:

  # cat ~/.perfconfig
  [llvm]
	dump-obj = true
  #
  # ls -la filter.o
  ls: cannot access filter.o: No such file or directory
  # cat filter.c
  #include <uapi/linux/bpf.h>
  #define SEC(NAME) __attribute__((section(NAME), used))

  SEC("func=hrtimer_nanosleep rqtp->tv_nsec")
  int func(void *ctx, int err, long nsec)
  {
	return nsec > 1000;
  }
  char _license[] SEC("license") = "GPL";
  int _version SEC("version") = LINUX_VERSION_CODE;
  # trace -e nanosleep --event filter.c usleep 6
  LLVM: dumping filter.o
     0.007 ( 0.007 ms): usleep/13976 nanosleep(rqtp: 0x7ffc5847f640                                        ) ...
     0.007 (         ): perf_bpf_probe:func:(ffffffff811137d0) tv_nsec=6000)
     0.070 ( 0.070 ms): usleep/13976  ... [continued]: nanosleep()) = 0
  # ls -la filter.o
  -rw-r--r--. 1 root root 776 Jun 20 17:01 filter.o
  # readelf -SW filter.o
  There are 7 section headers, starting at offset 0x148:

  Section Headers:
   [Nr] Name        Type       Address          Off    Size   ES Flg Lk Inf Al
   [ 0]             NULL       0000000000000000 000000 000000 00      0   0  0
   [ 1] .strtab     STRTAB     0000000000000000 0000e8 00005a 00      0   0  1
   [ 2] .text       PROGBITS   0000000000000000 000040 000000 00  AX  0   0  4
   [ 3] func=hrtimer_nanosleep rqtp->tv_nsec PROGBITS 0000000000000000 000040 000028 00  AX  0   0  8
   [ 4] license     PROGBITS   0000000000000000 000068 000004 00  WA  0   0  1
   [ 5] version     PROGBITS   0000000000000000 00006c 000004 00  WA  0   0  4
   [ 6] .symtab     SYMTAB     0000000000000000 000070 000078 18      1   2  8
  Key to Flags:
   W (write), A (alloc), X (execute), M (merge), S (strings)
   I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown)
   O (extra OS processing required) o (OS specific), p (processor specific)
   #

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466064161-48553-2-git-send-email-wangnan0@huawei.com
[ s/dumpping/dumping/g ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:34 -03:00
Arnaldo Carvalho de Melo e861964a26 perf tools: Remove --perf-dir and --work-dir
Completely unused in perf, carried along all this time from the initial
copy of git infrastructure, ditch'em.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wtiln26gyqndprmkl0kdswvi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:34 -03:00
Arnaldo Carvalho de Melo 814b3f5127 perf tools: Remove some unused functions
Probably are there since the beginning, taken from git but never used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lr65jeefffjeaywoapps9a6i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:33 -03:00
Jiri Olsa 0102ef3ec9 perf hists: Rename __hists__add_entry to hists__add_entry
There's no reason we should suffer the '__' prefix for the base global
function.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:33 -03:00
Adrian Hunter cbb0bba9f3 perf script: Fix documentation of '-f' when it should be '-F'
The documentation for perf script mixes up '-f' and '-F'. Fix it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/None
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:33 -03:00
Jean Delvare b573d8028e kbuild: List libelf-devel as an alternative
On openSUSE, the libelf development files are in package libelf-devel.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-s8nyk3pyy2927sd7qp7u42oi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-21 13:18:32 -03:00
Jack Miller 16c19a2e98 selftests/powerpc: Load Monitor Register Tests
Adds two tests. One is a simple test to ensure that the new registers
LMRR and LMSER are properly maintained. The other actually uses the
existing EBB test infrastructure to test that LMRR and LMSER behave as
documented.

Signed-off-by: Jack Miller <jack@codezen.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-21 15:30:50 +10:00
Linus Torvalds f780f00d72 Two fixes for the tracing system.
o When trace_printk() is used with a non constant format descriptor,
    it adds a NULL pointer into the trace format section, and the code
    isn't prepared to deal with it. This bug appeared by a change that
    was added in v3.5.
 
  o The ftracetest (selftests section) can't handle testing histograms
    when histograms are not configured. Currently it shows that they
    fail the test, when they should state that they are unsupported.
    This bug was added in the 4.7 merge window with the addition of
    the historgram code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXZ/TGAAoJEKKk/i67LK/8OKEH/2pRnbWFh2EHScrhUgpnzzsn
 9BSrxsON82KZtaRIl7QOCBXO8XGKdEfRzf6nz85q6I7GghURuzoGPpJ65YTx+InL
 Ksg3TVIVPzMTRMoHQRMO6LNaX2Ks76KeyWxA8T7ib6qJFLJjHkgTYg/NE5A7cnNl
 dNdz09GpHAgRt5zfETe/oS7pfc76w6x5wWSlt7oaeBXhY3goeq7WnX+/hqX3+/QI
 fLlvJi8A8K0PY+xx9Tn/k1mn74cRuT475grHyyypWeEgo7HNU4CjLXKlZclT2hvX
 qzv7tmJwccMmEVF0mdEpCttHmnnniJd8oZg4OQK/V3DX1RLKLMEz6OFUwBmXcbw=
 =z/B5
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Two fixes for the tracing system:

   - When trace_printk() is used with a non constant format descriptor,
     it adds a NULL pointer into the trace format section, and the code
     isn't prepared to deal with it.  This bug appeared by a change that
     was added in v3.5.

   - The ftracetest (selftests section) can't handle testing histograms
     when histograms are not configured.  Currently it shows that they
     fail the test, when they should state that they are unsupported.
     This bug was added in the 4.7 merge window with the addition of the
     historgram code"

* tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Fix hist unsupported result in hist selftests
  tracing: Handle NULL formats in hold_module_trace_bprintk_format()
2016-06-20 10:35:48 -07:00
Greg Kroah-Hartman af52739b92 Merge 4.7-rc4 into staging-next
We want the fixes in here, and we can resolve a merge issue in
drivers/iio/industrialio-trigger.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20 08:25:44 -07:00
Steven Rostedt (Red Hat) 0ded5174e9 ftracetest: Fix hist unsupported result in hist selftests
When histograms are not configured in the kernel, the ftracetest histogram
selftests should return "unsupported" and not "Failed". To detect this, the
test scripts have:

 FEATURE=`grep hist events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "hist trigger is not supported"
     exit_unsupported
 fi

The problem is that '-e' is in effect and any error will cause the program
to terminate. The grep for 'hist' fails, because it is not compiled it (thus
unsupported), but because grep has an error code for failing to find the
string, it causes the program to terminate, and is marked as a failed test.

Namhyung Kim recommended to test for the "hist" file located in
events/sched/sched_process_fork/hist instead, as it is more inline with the
other checks. As the hist file is only created if the histogram feature is
enabled, that is a valid check.

Link: http://lkml.kernel.org/r/20160523151538.4ea9ce0c@gandalf.local.home

Suggested-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 76929ab51f ("kselftests/ftrace: Add hist trigger testcases")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:46:21 -04:00
Dan Williams 6b0a57ed43 tools/testing/nvdimm: add pfn device dependency
Fail building nfit_test.ko when the configuration is missing pfn device
support.

Reported-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-17 16:23:23 -07:00
Linus Torvalds 78ae255f78 virtio: docs, tests for 4.7
This merely has some documentation and a new test, seems safe to merge.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXVUuiAAoJECgfDbjSjVRpm6AH/2LWANmP6paHOxXH/9BNKO3y
 4N0HeLo14JATPfiAYpfUm1TikusMn/qEZHLXQaykIC/8Hj5M7RbU1RKrSu0wrZb+
 +9NXRQtasj9SHeAvG6jLCaKNOR3ezdNOVM4RI3MkyGBx875PTWGQoYloDFRqYPlD
 TBkRKxctc4IAyck+nuZGYYHcQQ5SCA+6d0/FDAp2vNXO1+faNR0+p2MGOqQSzCkw
 KWv1b4nV7y+tjaylpckQADBDZZlwanDvVGLxlMPXNwmhe7XyhLIQ+cO7bgCiFPfz
 VpFiZJ5Imq2oxc7KboDuyyQjoft5DzJ6N7gVkpO+1fqrNazHZopUdhAyC1Qveog=
 =DANA
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio docs and tests from Michael Tsirkin:
 "This merely has some documentation and a new test, seems safe to
  merge"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: add noring tool
  tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu
  tools/virtio/ringtest: add usage example to README
  MAINTAINERS: Add file patterns for virtio device tree bindings
2016-06-15 15:55:49 -10:00
Michael S. Tsirkin 9fb6bc5b4a ptr_ring: ring test
Add ringtest based unit test for ptr ring.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:58:27 -07:00
Yannick Brosseau f80eb42894 selftests/exec: Makefile is a run-time dependency, add it to the install list
The execveat test try to exec the Makefile file and expect an EACCES
results. When running the test in the installed destination it would
fail with ENOENT since the file is not there.

Add Makefile to the TEST_FILES list so it's copied at install time.

Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-15 13:35:55 -06:00
Masami Hiramatsu 2fd457a345 perf probe: Add --cache option to cache the probe definitions
Add --cache option to cache the probe definitions. This just saves the
result of the dwarf analysis to probe cache.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160615032840.31330.44412.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 14:34:42 -03:00
Masami Hiramatsu dd975497ad perf probe: Introduce perf_cache interfaces
Introduce perf_cache object and interfaces to create, add entries,
commit, and delete the object.

perf_cache represents a file for the cached "perf probe" definitions on
one binary file or vmlinux which has its own build id. The probe cache
file is located under the build-id cache directory of the target binary,
as below;

  <perf-debug-dir>/.build-id/<BU>/<ILDID>/probe

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160615032830.31330.84998.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 14:34:31 -03:00
Jiri Olsa da1b0407c8 perf hists: Replace perf_evsel arg perf_hpp_fmt's width callback
Replacing perf_evsel arg perf_hpp_fmt's width callback with hists
object.

This will be helpful in future for non evsel related hist browsers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:50:04 -03:00
Jiri Olsa 0537217360 perf hists: Replace perf_evsel arg perf_hpp_fmt's header callback
Replacing perf_evsel arg perf_hpp_fmt's header callback with hists
object.

None of the actual callbacks actually use evsel object, also this will
be helpful in future for non evsel related hist browsers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:49:18 -03:00
Jiri Olsa d05e3aaeea perf stdio: Add use_callchain parameter to hists__fprintf
It will be convenient in following patches to display hists entries
without callchains even if they are defined.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:48:02 -03:00
Jiri Olsa 8f1d1b4452 perf stdio: Do not pass hists in hist_entry__fprintf
There's no need, we have the hists pointer in struct hist_entry.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:47:11 -03:00
Jiri Olsa 7a72a2e5e6 perf stdio: Separate standard headers output
Introducing hists__fprintf_standard_headers function to separate
standard headers display code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:46:39 -03:00
Jiri Olsa 5c854f3793 perf stdio: Separate hierarchy headers output
Introducing hists__fprintf_hierarchy_headers function to separate
hierarchy headers display code.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:46:02 -03:00
Jiri Olsa 36592ebb73 perf stdio: Separate headers output
Introducing hists__fprintf_headers function to separate the code that
displays headers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:44:26 -03:00
Jiri Olsa 01b4770d56 perf tui: Separate hierarchy and standard headers output
It will be useful for future changes that enhance headers with multiple
lines and span columns, which don't affect hierarchy headers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:44:22 -03:00
Jiri Olsa 94c3998899 perf tools: Fix Data Object sort entry width index
Putting correct HISTC_MEM_DADDR_DSO index to Data Object sort entry.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:41:56 -03:00
Jiri Olsa b0d745b3c3 perf mem: Add --ldlat option
Adding --ldlat option to specify desired latency for loads event.

Specify 50 as loads event latency:

  $ perf mem record -e ldlat-loads -v --ldlat 50 true
  calling: record -W -d -e cpu/mem-loads,ldlat=50/P true

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:35:27 -03:00
He Kuang 906a827642 perf unwind: Fix compile error for static cross build
Build failure for static cross-compiling on aarch64, with libunwind-x86
provided:

  $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1

  libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64,
  version 1 (SYSV), dynamically linked, not stripped

  $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64
  ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu-

  ~/libperf.a(libperf-in.o): In function `find_proc_info':
  :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table'
  ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access':
  :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space'
  :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy'
  ~/libperf.a(libperf-in.o): In function `_unwind__flush_access':
  :(.text+0xaee98): undefined reference to `_Ux86_flush_cache'
  ~/libperf.a(libperf-in.o): In function `_unwind__finish_access':
  :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space'
  ~/libperf.a(libperf-in.o): In function `get_entries':
  :(.text+0xaf148): undefined reference to `_Ux86_init_remote'
  :(.text+0xaf184): undefined reference to `_Ux86_get_reg'
  :(.text+0xaf1a4): undefined reference to `_Ux86_step'
  collect2: error: ld returned 1 exit status
  Makefile.perf:350: recipe for target '~/perf' failed
  make[1]: *** [~/perf] Error 1
  Makefile:68: recipe for target 'all' failed
  make: *** [all] Error 2

This is because the remote libunwind library detected is not appended to
EXTLIBS variable, which will be included between 'start-group' and
'end-group' when linking.

The existing variable LIBUNWIND_LIBS is assigned to libs for local
unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for
storing remote libunwind libraries instead.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:27:11 -03:00
Linus Walleij 97f69747d8 tools/gpio: add the gpio-event-mon tool
The gpio-event-mon is used from userspace as an example of how
to monitor GPIO line events. It will latch on to a certain
GPIO line on a certain gpiochip and print timestamped events
as they arrive.

Example output:
$ gpio-event-mon -n gpiochip2 -o 0 -r -f
Monitoring line 0 on gpiochip2
Initial line value: 1
GPIO EVENT 946685798487609863: falling edge
GPIO EVENT 946685798732482910: rising edge
GPIO EVENT 946685799115997314: falling edge
GPIO EVENT 946685799381469726: rising edge

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15 09:29:29 +02:00
Linus Walleij 2a144dd091 tools/gpio: add the gpio-hammer tool
The gpio-hammer is used from userspace as an example of how
to retrieve a GPIO handle for one or several GPIO lines and
hammer the outputs from low to high and back again. It will
pulse the selected lines once per second for a specified
number of times or indefinitely if no loop count is
supplied.

Example output:
$ gpio-hammer -n gpiochip0 -o5 -o6 -o7
Hammer lines [5, 6, 7] on gpiochip0, initial states: [1, 1, 1]
[-] [5: 0, 6: 0, 7: 0]

Tested-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15 09:29:04 +02:00
Paul E. McKenney 65cbea5bbd torture: Inflict default jitter
This commit enables jitter by default.  It may be manually disabled
by passing "--jitter 0" to kvm.sh.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:32 -07:00
Paul E. McKenney 5ef20f872d rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments
Because recent testing shows that "-soundhw pcspkr" is no longer required
in the kernel boot arguments, this commit drops this qemu argument.

Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:30 -07:00
Boqun Feng d5e953739c rcutorture: Don't specify the cpu type of QEMU on PPC
Do not restrict the cpu type to POWER7 for QEMU as we have POWER8 now.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:30 -07:00
Boqun Feng 1b2f48f29e rcutorture: Make -soundhw a x86 specific option
The option "-soundhw pcspk" gives me a error on PPC as follow:

qemu-system-ppc64: ISA bus not available for pcspk

This means this option doesn't work on ppc by default. So simply make
this an x86-specific option via identify_qemu_args().

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:29 -07:00
Boqun Feng 1b900c6a26 rcutorture: Use vmlinux as the fallback kernel image
The vmlinux image is available for all the architectures, and suitable
for running a KVM guest by QEMU, besides, we used to copy the vmlinux
to $resdir anyway. Therefore it makes sense to use it as the fallback
kernel image for rcutorture KVM tests.

This patch makes identify_boot_image() return vmlinux if
${TORTURE_BOOT_IMAGE} is not set on non-x86 architectures, also fixes
several places that hard-code "bzImage" as $KERNEL.

This also fixes a problem that PPC doesn't have a bzImage file as build
results.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:29 -07:00
Boqun Feng e5731b584b rcutorture/doc: Create initrd using dracut
Using dracut is another way to get an initramfs for KVM-based RCU
torture tests, which is more flexible than using the host's initramfs
image, because modules and binaries may be added or removed via dracut
command options. So add an example in the document, in case that there
are some situations where host's initramfs couldn't be used.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:28 -07:00
Paul E. McKenney 682ed706c5 torture: Add starvation events to error summary
This commit adds a string of the form "Starves: 10" to the summary
line for error conditions found in the console output.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:02:17 -07:00
Paul E. McKenney 6e8c66c867 torture: Forgive lengthy trace dumps and preemption
This commit avoids killing qemu if a trace dump is making progress
or if console log output is continuing and the console log timestamp
does not exceed the total plus grace period.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:02:16 -07:00
Kees Cook 58d0a862f5 seccomp: add tests for ptrace hole
One problem with seccomp was that ptrace could be used to change a
syscall after seccomp filtering had completed. This was a well documented
limitation, and it was recommended to block ptrace when defining a filter
to avoid this problem. This can be quite a limitation for containers or
other places where ptrace is desired even under seccomp filters.

This adds tests for both SECCOMP_RET_TRACE and PTRACE_SYSCALL manipulations.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
2016-06-14 10:54:38 -07:00
Masami Hiramatsu c4ff49209b perf probe: Uncomment and export synthesize_perf_probe_point()
Uncomment and export synthesize_perf_probe_point() which had once
introduced but has been disabled for a long time. This renews the code
and re-enable it.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160608092949.3116.21958.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-14 09:29:54 -03:00
Masami Hiramatsu 0542bb9c8d perf probe: Add perf_probe_event__copy()
Add perf_probe_event__copy() to copy perf_probe_event data structure and
sub data structures under given source perf_probe_event.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160608092940.3116.18034.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-14 09:29:54 -03:00
Masami Hiramatsu 4698b8b757 perf buildid: Rename and export build_id_cache__cachedir()
Rename and export build_id_cache__cachedir() for retrieving use of the
path of cache directory for given build_id.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160608092930.3116.67575.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-14 09:29:54 -03:00
Masami Hiramatsu 844faa4bcd perf probe: Fix to add NULL check for strndup
Fix to add a NULL check for strndup when parsing probe trace command.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160608092920.3116.63319.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-14 09:29:54 -03:00
Masami Hiramatsu 2a1ef032cf perf tools: Fix rm_rf() to handle non-regular files correctly
Fix rm_rf() to handle non-regular files correctly. This fix includes two
changes;

 - Fix to use lstat(3) instead of stat(3) since if the target
   file is a symbolic link, rm_rf() should unlink the symbolic
   link itself, not the file which pointed by the symlink.
 - Fix to unlink non-regular files (except for directory),
   including symlink.

Even though the first one fixes to stat symlink itself, without second
fix, it still failed because the symlink is not a regular file.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160608092911.3116.90929.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-14 09:29:54 -03:00
Taeung Song 826424cc91 perf config: Handle NULL at perf_config_set__delete()
perf_config_set__delete() purge and free the config set that contains
all config key-value pairs.  But if the config set (i.e. 'set' variable
at the function) is NULL, this is wrong so handle it.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1465389413-8936-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-14 09:29:53 -03:00
Dave Hansen e754aedc26 x86/mpx, selftests: Add MPX self test
I've had this code for a while, but never submitted it upstream.  Now
that Skylake hardware is out in the wild, folks can actually run this
for real.  It tests the following:

	1. The MPX hardware is enabled by the kernel and doing what it
	   is supposed to
	2. The MPX management code is present and enabled in the kernel
	3. MPX Signal handling
	4. The MPX bounds table population code (on-demand population)
	5. The MPX bounds table unmapping code (kernel-initiated freeing
	   when unused)

This has also caught bugs in the XSAVE code because MPX state is
saved/restored with XSAVE.

I'm submitting it now because it would have caught the recent issues
with the compat_siginfo code not being properly augmented when new
siginfo state is added.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160608172535.5B40B0EE@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14 12:19:24 +02:00
Ingo Molnar 3559ff9650 Merge branch 'linus' into perf/core, to pick up fixes before merging new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14 11:14:34 +02:00
Crestez Dan Leonard deb4d1fdcb iio: generic_buffer: Fix --trigger-num option
Initialize trig_num to -1 and handle trig_num=0 as a valid id.

Fixes: 7c7e9dad (iio: iio_generic_buffer: Add --trigger-num option)
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-11 17:38:06 +01:00
Linus Torvalds 7fcbc230c6 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "A handful of tooling fixes, two PMU driver fixes and a cleanup of
  redundant code that addresses a security analyzer false positive"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Remove a redundant check
  perf/x86/intel/uncore: Remove SBOX support for Broadwell server
  perf ctf: Convert invalid chars in a string before set value
  perf record: Fix crash when kptr is restricted
  perf symbols: Check kptr_restrict for root
  perf/x86/intel/rapl: Fix pmus free during cleanup
2016-06-10 11:15:41 -07:00
Greg Kroah-Hartman aabb406008 First round of IIO new device support, features and cleanups for the 4.8 cycle.
New device support
 * ads1015
   - add ads1115 support
 * bma220 accelerometer
   - new driver
   - triggered buffer support.
 * bmc150
   - add bmm150 support.
 * bmp280
   - bme280 support with addition of humidity channel.
 * max5487 potentiometer
   - new driver
 * MMA7660FC accelerometer.
   - New driver
 * st-pressure
   - support for the lps22hb
 * loop trigger.
   - This one is *nasty* but we have real applications (parrot drones) where
   it is useful.  The trigger basically spins as hard as it can firing off
   a new trigger each time all triggered devices come back to say they are
   done.  It doesn't hang a machine even when doing it on a dummy driver.
   A lot nicer than having this implemented within lots of device drivers
   anyway.
 
 Core stuff
 * Add support to create IIO devices via configfs (similar to we did for
 triggers a while back) + docs.
 * New channel types
   - IIO_ELECTRICAL_CONDUCTIVITY
 * Couple of MAINTAINERS patches to list the device tree bindings.
 * Make trigger ops structure non optional (comment fix). It hasn't been for
 an awful long time, but that's not what the description said.
 
 New features
 * ak8975
   - support adapters that are limited to byte data only by allowing the
   emulated block read i2c function that was recently introduced.
 * atlas-ph
   - support atlas-ec (electrical conductivity sensor)
 * bmi160
   - add available frequency and scale attributes to make the driver
   more user friendly (and avoid having to read the datasheet to know
   what will work).
 * dummy
   - move creation to configfs interface.  It's not real hardware so we
   are not that worried about the ABI breakage ;)
 * mma8452
   - oversampling ration support
 * nau7802
   - expose available gains to make life easier for userspace.
 * st-sensors
   - allow use of emulation for SMBus block reads as all the st parts support
   it.
 * ti-ads1015
   - list datasheet names to allow their use by inkernel consumers.
 * Various module alias additions to help auto probing.  Drop one redundant one
 as well.
 
 Cleanups
 * ad7266, ad7476, ad7887, ad7923, ad799x
   - use direct mode claim function rather than open coding it during sensor
   read (prevents switching on buffers mid read).
 * ad7793, ad7791
   - use direct mode claim to prevent frequency changes when buffers running.
 * afe440x - These are ABI breaking but the driver requires custom userspace
   code to do anything useful anyway and that is still being written and under
   control of TI.  Ultimately we may have other libraries to do pulse
   oximetry with these devices but we aren't aware of any yet.
   - kernel-doc format fixes
   - drop ifdef fun around of_match_ptr - it's not worth the mess to save
   a tiny amount of space.
   - drop some unnecessary register initializations.
   - drop the weird locked gain modes as they gain us nothing (can just set
   all gains separately).
   - remove handling of offset attributes seeing as no channels actually have
   them (oops)
   - Drop the LED3 input channel as it's an alias for ALED2.
   - *big one* remove channel names - an experiment that turned out to not
   make sense - see patch for details.
   - use regmap fields to clean up code.
   - tie the tia gain stages to appropriate channels in the ABI as that is
   what they really effect. Same with the LED currents.
   - cleanout some unused defines and fix a missnamed one.
 * atlas-ph
   - reorganise to allow support of other similar parts.
 * bmc150
   - document supported chips in kconfig help.
 * jsa1212
   - drop an unneeded i2c functionality check for functionality the driver
   doesn't use.
 * mxs-lradc
   - simply touch screen registration code.
   - remove the touch screen unregister as all devm based now.
   - disable only those channels that are masked in hardware stop (others
   are already dealt with elsewhere)
 * st-sensors
   - unexport st_sensors_get_buffer_element as nothing outside the st-sensors
   core driver uses it.
   - fix handling of failure to start up regulators.
 * tpl0102
   - drop an i2c functionality test for features that aren't needed.
 * ti-am335x
   - use variable name rather than type in sizeof for clarity.
   - use SIMPLE_DEV_PM_OPS helper macro to tidy up a bit.
 
 Tools
 * Add install / uninstall to makefile.  Someone cares, so presumably
 some people will find it useful!
 *  generic_buffer
    - rename to iio_generic_buffer to line up with other tools.
    - handle cleanup when receiving signals
    - Add a --device-num option and a --trigger-num option rather than
    relying on naming which doesn't work if you have two of the same part.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXWFXGAAoJEFSFNJnE9BaIQ4kP/jcoVTR8w6EMdcr1BErrvFgm
 IMbMMK8wJtc1dhKcp77h/DQjCunPAaDMgdtg1uJcreRDl1dY1jiFh/PMLrt/eods
 tsJZcN1h40aLlPEdMQFl3oiaWjpUm23gdDtfiCHA+sM/FhQ+A+83EdonU7hbAGT2
 E2NAb5xkC+74WEUit5qEouz++4JRnsJEpBx3A7mwkiUH9RnFA9OflsTdIFSIEbzb
 V4yMWeYBAlhwKPy/7z6/hAMK/+Psabw8FppCAw2HcADVpT517rkl4MpvErSZeFGz
 cr46+ZWhXZ4PaG2jG2xVLpqSbqLSfWp8uqfj0WavW2gFn/1jCB+FST904q7IPVW2
 QPxALqxMAMSzOHxTYmDLfJ4IJ5vvLKroom4ixKgbl7jKXF3+PTooR6U4hGQmLK7K
 VKWjb/kIdHpuRT3/pG2kysMtJkk1av5BBZkl9sWUEFgCd4vYP1eB1Ah3aE/P26OH
 BCueMDaJqKAzmVa6Dx5MCLlJpxHpQl/OBz5wdXiMRbYeky/QHgzaTmi/HZ0wwXvn
 zFHAglWzLq7q0HY+q7wwI20R16cRYIve3HOaLFvQdXd1xpBP1BF+aAxT/vSb+otS
 1OWCEHAxq4XEM7VcRKv9XL59gXuSB8ZaSl6k82+IjjfgOqLHh8BSygVle7iu14TE
 glokfXQRC7xhgfC1zQf9
 =Hq1a
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.8 cycle.

New device support
* ads1015
  - add ads1115 support
* bma220 accelerometer
  - new driver
  - triggered buffer support.
* bmc150
  - add bmm150 support.
* bmp280
  - bme280 support with addition of humidity channel.
* max5487 potentiometer
  - new driver
* MMA7660FC accelerometer.
  - New driver
* st-pressure
  - support for the lps22hb
* loop trigger.
  - This one is *nasty* but we have real applications (parrot drones) where
  it is useful.  The trigger basically spins as hard as it can firing off
  a new trigger each time all triggered devices come back to say they are
  done.  It doesn't hang a machine even when doing it on a dummy driver.
  A lot nicer than having this implemented within lots of device drivers
  anyway.

Core stuff
* Add support to create IIO devices via configfs (similar to we did for
triggers a while back) + docs.
* New channel types
  - IIO_ELECTRICAL_CONDUCTIVITY
* Couple of MAINTAINERS patches to list the device tree bindings.
* Make trigger ops structure non optional (comment fix). It hasn't been for
an awful long time, but that's not what the description said.

New features
* ak8975
  - support adapters that are limited to byte data only by allowing the
  emulated block read i2c function that was recently introduced.
* atlas-ph
  - support atlas-ec (electrical conductivity sensor)
* bmi160
  - add available frequency and scale attributes to make the driver
  more user friendly (and avoid having to read the datasheet to know
  what will work).
* dummy
  - move creation to configfs interface.  It's not real hardware so we
  are not that worried about the ABI breakage ;)
* mma8452
  - oversampling ration support
* nau7802
  - expose available gains to make life easier for userspace.
* st-sensors
  - allow use of emulation for SMBus block reads as all the st parts support
  it.
* ti-ads1015
  - list datasheet names to allow their use by inkernel consumers.
* Various module alias additions to help auto probing.  Drop one redundant one
as well.

Cleanups
* ad7266, ad7476, ad7887, ad7923, ad799x
  - use direct mode claim function rather than open coding it during sensor
  read (prevents switching on buffers mid read).
* ad7793, ad7791
  - use direct mode claim to prevent frequency changes when buffers running.
* afe440x - These are ABI breaking but the driver requires custom userspace
  code to do anything useful anyway and that is still being written and under
  control of TI.  Ultimately we may have other libraries to do pulse
  oximetry with these devices but we aren't aware of any yet.
  - kernel-doc format fixes
  - drop ifdef fun around of_match_ptr - it's not worth the mess to save
  a tiny amount of space.
  - drop some unnecessary register initializations.
  - drop the weird locked gain modes as they gain us nothing (can just set
  all gains separately).
  - remove handling of offset attributes seeing as no channels actually have
  them (oops)
  - Drop the LED3 input channel as it's an alias for ALED2.
  - *big one* remove channel names - an experiment that turned out to not
  make sense - see patch for details.
  - use regmap fields to clean up code.
  - tie the tia gain stages to appropriate channels in the ABI as that is
  what they really effect. Same with the LED currents.
  - cleanout some unused defines and fix a missnamed one.
* atlas-ph
  - reorganise to allow support of other similar parts.
* bmc150
  - document supported chips in kconfig help.
* jsa1212
  - drop an unneeded i2c functionality check for functionality the driver
  doesn't use.
* mxs-lradc
  - simply touch screen registration code.
  - remove the touch screen unregister as all devm based now.
  - disable only those channels that are masked in hardware stop (others
  are already dealt with elsewhere)
* st-sensors
  - unexport st_sensors_get_buffer_element as nothing outside the st-sensors
  core driver uses it.
  - fix handling of failure to start up regulators.
* tpl0102
  - drop an i2c functionality test for features that aren't needed.
* ti-am335x
  - use variable name rather than type in sizeof for clarity.
  - use SIMPLE_DEV_PM_OPS helper macro to tidy up a bit.

Tools
* Add install / uninstall to makefile.  Someone cares, so presumably
some people will find it useful!
*  generic_buffer
   - rename to iio_generic_buffer to line up with other tools.
   - handle cleanup when receiving signals
   - Add a --device-num option and a --trigger-num option rather than
   relying on naming which doesn't work if you have two of the same part.
2016-06-09 09:15:58 -07:00
Ingo Molnar b8ab92201a perf/core improvements and fixes:
User visible:
 
 - Support cross unwinding, i.e. collecting '--call-graph dwarf' perf.data files
   in one machine and then doing analysis in another machine of a different
   hardware architecture. This enables, for instance, to do:
 
 	perf record -a --call-graph dwarf
 
   on a x86-32 or aarch64 system and then do 'perf report' on it on a
   x86_64 workstation. (He Kuang)
 
 - Fix crash in build_id_cache__kallsyms_path(), recent regression (Wang Nan)
 
 Infrastructure:
 
 - Make tools/lib/bpf use the IS_ERR return facility consistently and also stop
   using the _get_ term for non-reference count methods (Arnaldo Carvalho de Melo)
 
 - 'perf config' refactorings (Taeung Song)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXVyVuAAoJENZQFvNTUqpAcXAP/R+mXODq3brY9C9N4/ujnAvc
 vu/WHq7J1kbL8JrAsUHos0avPCZJigibx3rzG6ZuV3SqOpvKBc7hy+nSOrRyXgT3
 QG8mMpdhgyexCYRkd8nELAxS2q1E6XzeHJ5Ot5gcHx+N1QCCTm9xZ4++m5ee/Juo
 0ceud29dljmjjTehAzEht5N4fgRPavAwjO8DTYVQF0+hMPbGQE7EAS7LF+mDTFxY
 UAe7n1buyBm4Y/OLXNP79zQG78eSktau3amUiZ/W3owJkhbUrE7trfWNnNPCYQVU
 ySVm0xbmy8fdhm6XNxCem+ya9SZ1ROF71A0FiDWlShioutcKBbustBo5UO82Rjxg
 htHLOoE08BqniIWrqg8VCG2SP8PjzC9JrjxsppnZd4UgfgvwJ0hmRZ++h5dN1HFk
 /RK2GJTot4EaxR9etkWG9R1sCBLAtJy+MLO/oHMxpR8Rw/1RlJRPV7amnLMvrmdx
 wRlEVa+OkV0Yb968aai9DObqOkNmNSMLXXQ5ez5T01h2+VjA/PV7UtJ7z0O7Nk4L
 lyn6e1IE5uko1oaPJqNhfnu7imq1AhRt8ysXfEHF4RD+eIlUMTZNxRzfyruKyJXo
 YUxpfVGho60pYKMYHjriH966wWxCmWZhhY2qERbt3A9ECkVuagUWiFwx/u5ngiG1
 BWxVkGtBh1yUKuttY7We
 =DvZE
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20160607' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Support cross unwinding, i.e. collecting '--call-graph dwarf' perf.data files
  in one machine and then doing analysis in another machine of a different
  hardware architecture. This enables, for instance, to do:

	perf record -a --call-graph dwarf

  on a x86-32 or aarch64 system and then do 'perf report' on it on a
  x86_64 workstation. (He Kuang)

- Fix crash in build_id_cache__kallsyms_path(), recent regression (Wang Nan)

Infrastructure changes:

- Make tools/lib/bpf use the IS_ERR return facility consistently and also stop
  using the _get_ term for non-reference count methods (Arnaldo Carvalho de Melo)

- 'perf config' refactorings (Taeung Song)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08 09:34:15 +02:00
Ingo Molnar aa3a655b15 perf/core improvements and fixes:
User visible:
 
 - Tooling support for TopDown counters, recently added to the kernel (Andi Kleen)
 
 - Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang)
 
 - Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song)
 
 Build fixes:
 
 - Respect CROSS_COMPILE for the linker in libapi (Lucas Stach)
 
 Infrastructure:
 
 - Fix perf_evlist__alloc_mmap() failure path (Wang Nan)
 
 - Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXVeP9AAoJENZQFvNTUqpAe8oP/10gbODr38JjOwrgARoux7so
 CVLpaxI21tpfEd3RTSPQSHx7wbph1luWy/GI2KDu39futg5FRDKNzVK7Ciy5VUx6
 dW2BKhDjQb97G6X62Zp8rsw7jwNN775ot8E7XFzEMl6bHVRkU0bO4cBM8rMh65NW
 dP4UMhE65hEkInxPpr87SYyxgKoWAYao+ZXFyIXzqApUZJ2Enqp7uNwDt5x4zedh
 3d9y7EUQpaDmXcdtcSFfsZCa5B+3/5HKYWksX6ofDcwvTZUTtjEslAPH9Xt+dmYn
 x+HoMvM3ZX33UeYfTiPYjEAmOUdis8ZYvbSf0XdtpYTNUsiw+YgUcBbWsYOZrdvk
 N+dCRoVlaU4BBn1UpPWu1o0BC/uBgVjkWbXsvVSZC73cJXOoB1PbMzHTLvX22KxA
 gcGOG5EpgKKf+vz3NwwRNRhmjIh97ChA/OOP8TYIBEWFheOtBvnHJvRawG4vDR09
 4Ywg2uecbZfN+UI3qv7kis9TvV03RWgpCCWMClAmrm3RGqNFfGQGIEoRucwcUGK7
 TzfvU2ycetw6hizoLgXR8gyYhhkEiZ5rhogvx+5SxVh+g9tSxLrWZxhU6jDH5zRp
 vAJ1hUFkafOC60qGEkfGVnFdo1zLWhhGmN1W5mzSsYfWZCVuhDduD3i10UfX4dip
 3gNEajV6R96WEEuGeIbs
 =60TB
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20160606' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Tooling support for TopDown counters, recently added to the kernel (Andi Kleen)

- Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang)

- Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song)

Build fixes:

- Respect CROSS_COMPILE for the linker in libapi (Lucas Stach)

Infrastructure changes:

- Fix perf_evlist__alloc_mmap() failure path (Wang Nan)

- Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08 09:29:23 +02:00
Ingo Molnar 616d1c1b98 Merge branch 'linus' into perf/core, to refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08 09:26:46 +02:00
He Kuang 057fbfb25c perf callchain: Support aarch64 cross-platform
Support aarch64 cross platform callchain unwind.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-15-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 15:13:35 -03:00
He Kuang 52ffe0ff02 perf callchain: Support x86 target platform
Support x86(32-bit) cross platform callchain unwind.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-14-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 15:13:27 -03:00
He Kuang 19473e7ba8 perf unwind: Introduce flag to separate local/remote unwind compilation
This is a preparation for including unwind-libunwind-local.c in other
files for remote libunwind.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-13-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 15:11:46 -03:00
He Kuang eeb118c5d7 perf unwind: Change fixed name of libunwind__arch_reg_id to macro
For local libunwind, it uses the fixed methods to convert register id
according to the host platform, but in remote libunwind, this convert
function should be the one for remote architecture. This patch changes
the fixed name to macro and code for each remote platform can be
compiled indivadually.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-12-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 15:11:46 -03:00
He Kuang d64ec10ec8 perf unwind: Check the target platform before assigning unwind methods
Currently, 'perf script' uses host unwind methods to parse perf.data
callchain info without taking the target architecture into account, i.e.
assuming the perf.data file was generated on the same machine where the
analysis is being performed. So we get wrong result without any warnings
when unwinding callchains of x86(32-bit) on x86(64-bit) machine.

This patch adds an extra step that checks the target platform before
assigning unwind methods. In later patches in this series, we can use
this info to assign the right unwind methods for supported platforms.

Committer note:

After fixing it to register the local unwinder for live mode tools
('perf trace', 'perf top'), i.e. tools that don't use a perf.data file,
it works as intended and passes the 'perf test unwind' test:

  # perf trace -e nanosleep --call dwarf usleep 1
     0.328 ( 0.058 ms): usleep/11115 nanosleep(rqtp: 0x7fff083fa480) = 0
                                       __nanosleep_nocancel+0x7 (/usr/lib64/libc-2.22.so)
                                       usleep+0x34 (/usr/lib64/libc-2.22.so)
                                       main+0x1eb (/usr/bin/usleep)
                                       __libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
                                       _start+0x29 (/usr/bin/usleep)
  # perf test 48
  48: Test dwarf unwind         : Ok
  #

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-11-git-send-email-hekuang@huawei.com
[ Fixed exit path for 'live' mode tools, where we need to default to local unwinding ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 15:09:36 -03:00
He Kuang 940e6987fc perf tools: Export normalize_arch() function
Export normalize_arch() function, so other part of perf can get
normalized form of arch string.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-10-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:53 -03:00
He Kuang f6d725324a perf tools: Extract common API out of unwind-libunwind-local.c
This patch extracts common unwind-libunwind APIs out of
unwind-libunwind-local.c, this part will be used by both local and
remote libunwind.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-9-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:53 -03:00
He Kuang a597b547d6 perf unwind: Rename unwind-libunwind.c to unwind-libunwind-local.c
Since unwind-libunwind.c contains code for specific arithecture, we
change it's name to unwind-libunwind-local.c, and let it only be built
if local libunwind is supported.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-8-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:53 -03:00
He Kuang 9d8e14d306 perf unwind: Separate local/remote libunwind config
CONFIG_LIBUNWIND/NO_LIBUNWIND are changed to CONFIG_LOCAL_LIBUNWIND/
NO_LOCAL_LIBUNWIND for retaining local unwind features. The new
CONFIG_LIBUNWIND stands for either local or remote or both unwind are
supported, and NO_LIBUNWIND means that neither local nor remote unwind
is supported.

LIBUNWIND_LIBS is eliminated in LDFLAGS if local libunwind is not
supported.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-7-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:52 -03:00
He Kuang 403cacb8a2 perf unwind: Don't mix LIBUNWIND_LIBS into LIBUNWIND_LDFLAGS
LIBUNWIND_LIBS contains libunwind libraries used for local only, don't
mix this into LIBUNWIND_LDFLAGS so we can later use LIBUNWIND_LDFLAGS
both for local and remote libunwind.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-6-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:52 -03:00
He Kuang 8132a2a841 perf unwind: Move unwind__prepare_access from thread_new into thread__insert_map
To determine the libunwind methods to use, we should get the
32bit/64bit information from maps of a thread. When a thread is newly
created, the information is not prepared. This patch moves
unwind__prepare_access() into thread__insert_map() so we can get the
information we need from maps. Meanwhile, let thread__insert_map()
return value and show messages on error.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-5-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:52 -03:00
He Kuang f83c04156c perf unwind: Introduce 'struct unwind_libunwind_ops' for local unwind
Currently, libunwind operations are fixed, and they are chosen according
to the host architecture. This will lead to a problem that if a thread
is run as x86_32 on a x86_64 machine, perf will use libunwind methods
for x86_64 to parse the callchain and get wrong results.

This patch changes the fixed methods of libunwind operations to be
thread/map related, and each thread can have individual libunwind
operations. Local libunwind methods are registered as default value.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-4-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:52 -03:00
He Kuang c1d1d0d9b3 perf unwind: Decouple thread->address_space on libunwind
Currently, the type of thread->addr_space is unw_addr_space_t, which is
a pointer defined in libunwind headers. For local libunwind, we can
simple include "libunwind.h", but for remote libunwind, the header file
is depends on the target libunwind platform. This patch uses 'void *'
instead to decouple the dependence on libunwind.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:51 -03:00
He Kuang 195106b9ff perf unwind: Use LIBUNWIND_DIR for remote libunwind feature check
Pass LIBUNWIND_DIR to feature check flags for remote libunwind
tests. So perf can be able to detect remote libunwind libraries from
arbitrary directory.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 12:08:51 -03:00
Taeung Song 8beeb00f2c perf config: Use new perf_config_set__init() to initialize config set
Instead of perf_config(), this function initializes config set by
reading various files: user config ~/.perfconfig and system config
$(sysconfdir)/perfconfig).

If there are the same config variable in both user and system config
files, user config has higher priority than system config.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1465291577-20973-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 11:01:25 -03:00
Taeung Song 25d8f48f78 perf config: Constructor should free its allocated memory when failing
Because of die() at perf_parse_file() a config set was freed in
collect_config(), if failed.  But it is natural to free a config set
after collect_config() is done when some problems happened.

So, in case of failure, lastly free a config set at perf_config_set__new()
instead of freeing the config set in collect_config().

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1465291577-20973-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 10:58:55 -03:00
Wang Nan c58c49ac63 perf tools: Fix crash in build_id_cache__kallsyms_path()
build_id_cache__kallsyms_path() accepts a string buffer but also allocs
a buffer using asnprintf. Unfortunately, the its only user passes it a
stack-allocated buffer. Freeing it causes crashes like this:

  $ perf script
  *** Error in `/home/wangnan/perf': free(): invalid pointer: 0x00007fffffff9630 ***
  ======= Backtrace: =========
  lib64/libc.so.6(+0x6eeef)[0x7ffff5dbaeef]
  lib64/libc.so.6(+0x78cae)[0x7ffff5dc4cae]
  lib64/libc.so.6(+0x79987)[0x7ffff5dc5987]
  /home/w00229757/perf(build_id_cache__kallsyms_path+0x6b)[0x49681b]
  /home/w00229757/perf[0x4bdd40]
  /home/w00229757/perf(dso__load+0xa3a)[0x4c048a]
  /home/w00229757/perf(map__load+0x6f)[0x4d561f]
  /home/w00229757/perf(thread__find_addr_map+0x235)[0x49e935]
  /home/w00229757/perf(machine__resolve+0x7d)[0x49ec6d]
  /home/w00229757/perf[0x4555a8]
  /home/w00229757/perf[0x4d9507]
  /home/w00229757/perf[0x4d9e80]
  /home/w00229757/perf(ordered_events__flush+0x354)[0x4dd444]
  /home/w00229757/perf(perf_session__process_events+0x3d0)[0x4dc140]
  /home/w00229757/perf(cmd_script+0x12b0)[0x4592e0]
  /home/w00229757/perf[0x4911f1]
  /home/w00229757/perf(main+0x68f)[0x4352ef]
  /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ffff5d6dbd5]
  /home/w00229757/perf[0x435415]
  ======= Memory map: ========

This patch simplifies build_id_cache__kallsyms_path(), not even
considering allocating a string buffer, so never frees anything. Its
caller should manage memory allocation.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 01412261d9 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid")
Link: http://lkml.kernel.org/r/1465271678-7392-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-07 10:49:41 -03:00
Helge Deller fc100a7f89 soreuseport: Fix reuseport_bpf testcase on 32bit architectures
This fixes the following compiler warnings when compiling the
reuseport_bpf testcase on a 32 bit platform:

reuseport_bpf.c: In function ‘attach_ebpf’:
reuseport_bpf.c:114:15: warning: cast from pointer to integer of ifferent size [-Wpointer-to-int-cast]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-06 15:20:16 -07:00
Arnaldo Carvalho de Melo edb13ed47c tools lib bpf: Rename set_private() to set_priv()
For consistency with class__priv() elsewhere, and with the callback
typedef for clearing those areas (e.g. bpf_map_clear_priv_t).

Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-rnbiyv27ohw8xppsgx0el3xb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:19:49 -03:00
Arnaldo Carvalho de Melo be834ffbd1 tools lib bpf: Make bpf_program__get_private() use IS_ERR()
For consistency with bpf_map__priv() and elsewhere.

Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-x17nk5mrazkf45z0l0ahlmo8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:19:34 -03:00
Arnaldo Carvalho de Melo a7fe0450b0 tools lib bpf: Remove _get_ from non-refcount method names
The use of this term is not warranted here, we use it in the kernel
sources and in tools/ for refcounting, so, for consistency, rename them.

Acked-bu: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-4ya1ot2e2fkrz48ws9ebiofs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:19:25 -03:00
Arnaldo Carvalho de Melo 6e009e65a1 tools lib bpf: Rename bpf_map__get_fd() to bpf_map__fd()
For consistency, leaving "get" for reference counting.

Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-msy8sxfz9th6gl2xjeci2btm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:19:15 -03:00
Arnaldo Carvalho de Melo 53897a78ca tools lib bpf: Use IS_ERR() reporting macros with bpf_map__get_def()
And for consistency, rename it to bpf_map__def(), leaving "get" for
reference counting.

Also make it return a const pointer, as suggested by Wang.

Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-mer00xqkiho0ymg66b5i9luw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:18:55 -03:00
Arnaldo Carvalho de Melo 009ad5d594 tools lib bpf: Rename bpf_map__get_name() to bpf_map__name()
For consistency, leaving "get" for reference counting.

Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-crnflv84ejyhpba933ec71gs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:18:44 -03:00
Arnaldo Carvalho de Melo b4cbfa5670 tools lib bpf: Use IS_ERR() reporting macros with bpf_map__get_private()
To try to, over time, consistently use the IS_ERR() interface instead of
using two return values, i.e. the integer return value for an error and
the pointer address to return the bpf_map->priv pointer.

Also rename it to bpf__priv(), to leave the "get" term for reference
counting.

Noticed while working on using BPF for collecting non-integer syscall
argument payloads (struct sockaddr in calls such as connect(), for
instance), where we need to use BPF maps and thus generalise
bpf__setup_stdout() to connect bpf_output events with maps in a bpf
proggie.

Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-saypxyd6ptrct379jqgxx4bl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 18:18:30 -03:00
Taeung Song 7db91f2510 perf config: Handle the error when config set is NULL at collect_config()
collect_config() collect all config key-value pairs from config files
and put each config info in config set.  But if config set (i.e. 'set'
variable at collect_config()) is NULL, this is wrong so handle it.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1465210380-26749-4-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 17:43:19 -03:00
Taeung Song 78f71c996f perf config: Fix abnormal termination at perf_parse_file()
If a config file has wrong key-value pairs, the perf process will be
forcibly terminated by die() at perf_parse_file() called by
perf_config() so terminal settings can be crushed because of unusual
termination.

For example:

If user config file has a wrong value 'red;default' instead of a normal
value like 'red, default' for a key 'colors.top',

    # cat ~/.perfconfig
    [colors]
        medium = red;default # wrong value

and if running sub-command 'top',

    # perf top

perf process is dead by force and terminal setting is broken
with a messge like below.

    Fatal: bad config file line 2 in /root/.perfconfig

So fix it.
If perf_config() can return on failure without calling die()
at perf_parse_file(), this problem can be solved.
And if a config file has wrong values, show the error message
and then use default config values instead of wrong config values.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1465210380-26749-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 17:43:17 -03:00
Andi Kleen c51fd6395d perf stat: Add missing aggregation headers for --metric-only CSV
When in CSV mode --metric-only outputs an header, unlike the other
modes. Previously it did not properly print headers for the aggregation
columns, so the headers were actually shifted against the real values.

Fix this here by outputting the correct headers for CSV.

v2: Indent array.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 17:43:12 -03:00
Andi Kleen 41c8ca2a92 perf stat: Print topology/time headers with --metric-only
When --metric-only is enabled there were no headers for the topology in
interval mode.  Also when headers were printed they were on a separate
line.

Before:

  $ perf stat  --metric-only  -A -I 1000 -a
    1.001038376     frontend cycles idle insn per cycle  stalled cycles per insn branch-misses of all branches
    1.001038376 CPU0   123.54%               0.23           5.29                    7.61%
    1.001038376 CPU1   137.78%               0.24           5.13                   10.07%
    1.001038376 CPU2    64.48%               0.22           5.50                    6.84%

After:

  $ perf stat  --metric-only  -A -I 1000 -a
    1.001111114 CPU0    82.46%               0.32           2.60                    7.64%
    1.001111114 CPU1   126.63%               0.02          42.83                    0.15%
    1.001111114 CPU2   193.54%               0.32           2.59                    6.92%

v2: Move all headers on a single line

Reported-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 17:04:16 -03:00
Andi Kleen 239bd47f83 perf stat: Add computation of TopDown formulas
Implement the TopDown formulas in 'perf stat'. The topdown basic metrics
reported by the kernel are collected, and the formulas are computed and
output as normal metrics.

See the kernel commit exporting the events for details on the used
metrics.

Committer note:

Output example:

  # perf stat --topdown -a usleep 1

   Performance counter stats for 'system wide':

             retiring     bad speculation   frontend bound   backend bound
  S0-C0    2     23.8%       11.6%            28.3%           36.3%
  S0-C1    2     16.2%       15.7%            36.5%           31.6%

         0.000579956 seconds time elapsed
  #

v2: Always print all metrics, only use thresholds for coloring.
v3: Mark retiring over threshold green, not red.
v4: Only print one decimal digit
    Fix color printing of one metric
v5: Avoid printing -0.0
v6: Remove extra frontend event lookup

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 17:04:16 -03:00
Andi Kleen 44b1e60ab5 perf stat: Basic support for TopDown in perf stat
Add basic plumbing for TopDown in perf stat

TopDown is intended to replace the frontend cycles idle/ backend cycles
idle metrics in standard perf stat output.  These metrics are not
reliable in many workloads, due to out of order effects.

This implements a new --topdown mode in perf stat (similar to
--transaction) that measures the pipe line bottlenecks using
standardized formulas. The measurement can be all done with 5 counters
(one fixed counter)

The result are four metrics:

FrontendBound, BackendBound, BadSpeculation, Retiring

that describe the CPU pipeline behavior on a high level.

The full top down methology has many hierarchical metrics.  This
implementation only supports level 1 which can be collected without
multiplexing. A full implementation of top down on top of perf is
available in pmu-tools toplev.  (http://github.com/andikleen/pmu-tools)

The current version works on Intel Core CPUs starting with Sandy Bridge,
and Atom CPUs starting with Silvermont.  In principle the generic
metrics should be also implementable on other out of order CPUs.

TopDown level 1 uses a set of abstracted metrics which are generic to
out of order CPU cores (although some CPUs may not implement all of
them):

  topdown-total-slots       Available slots in the pipeline
  topdown-slots-issued      Slots issued into the pipeline
  topdown-slots-retired     Slots successfully retired
  topdown-fetch-bubbles     Pipeline gaps in the frontend
  topdown-recovery-bubbles  Pipeline gaps during recovery
                            from misspeculation

These metrics then allow to compute four useful metrics:

FrontendBound, BackendBound, Retiring, BadSpeculation.

Add a new --topdown options to enable events.  When --topdown is
specified set up events for all topdown events supported by the kernel.
Add topdown-* as a special case to the event parser, as is needed for
all events containing -.

The actual code to compute the metrics is in follow-on patches.

v2: Use standard sysctl read function.
v3: Move x86 specific code to arch/
v4: Enable --metric-only implicitly for topdown.
v5: Add --single-thread option to not force per core mode
v6: Fix output order of topdown metrics
v7: Allow combining with -d
v8: Remove --single-thread again
v9: Rename functions, adding arch_ and topdown_.
v10: Expand man page and describe TopDown better
Paste intro into commit description.
Print error when malloc fails.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 17:04:15 -03:00
Andi Kleen 17a2634bcb perf test: Ignore .scale and other special files
'perf test' tries to parse all entries in /sys/devices/cpu/events/.
Ignore the special entries like '.scale', which cannot be directly
parsed as an event. This patch assumes all files containing a '.' are
special and can be ignored.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1465223766-29902-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-06 12:11:14 -03:00
Michael S. Tsirkin 139ab4d4e6 tools/virtio: add noring tool
Useful to measure testing framework overhead.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-06 13:00:11 +03:00
Mike Rapoport ef1b144d23 tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu
/dev/cpu is only available on x86 with certain modules (e.g. msr) enabled.
Using lscpu to get processors count is more portable.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-06 13:00:11 +03:00
Mike Rapoport 3b220cf867 tools/virtio/ringtest: add usage example to README
Having typical usage example in the README file is more convinient than in
the git history...

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-06 13:00:11 +03:00
He Kuang 40f20e5074 perf script: Show call graphs when 1st event doesn't have it but some other has
There's a display inconsistency when there are multiple tracepoint
events, some of which have the 'call-graph' config option set but the
first one hasn't, i.e. the whole logic for call graph processing is
enabled only if the first tracepoint event has call-graph set.

For instance, if we record signal_deliver with call-graph and
signal_generate without:

  $ perf record -g -a -e signal:signal_deliver -e signal:signal_generate/call-graph=no/

  [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]

  $ perf script

  kworker/u2:1    13 [000]  6563.875949: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1313 grp=1 res=0 ff61cc __send_signal+0x3ec ([kernel.kallsyms])
  perf  1313 [000]  6563.877584:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000
              7ffff314 get_signal+0x80007f0023a4 ([kernel.kallsyms])
              7fffe358 do_signal+0x80007f002028 ([kernel.kallsyms])
              7fffa5e8 exit_to_usermode_loop+0x80007f002053 ([kernel.kallsyms])
              ...

Then we exchange the order of these two events in commandline, and keep
signal_generate without call-graph.

  $ perf record -g -a -e signal:signal_generate/call-graph=no/ -e signal:signal_deliver

  [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]

  $ perf script

    kworker/u2:2  1314 [000]  6933.353060: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1321 grp=1 res=0
            perf  1321 [000]  6933.353872:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000

This time, the callchain of the event signal_deliver disappeared. The
problem is caused by that perf only checks for the first evsel in evlist
and decides if callchain should be printed.

This patch traverses all evsels in evlist to see if any of them have
callchains, and shows the right result:

  $ perf script

  kworker/u2:2  1314 [000]  6933.353060: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1321 grp=1 res=0 ff61cc __send_signal+0x3ec ([kernel.kallsyms])
  perf  1321 [000]  6933.353872:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000
              7ffff314 get_signal+0x80007f0023a4 ([kernel.kallsyms])
              7fffe358 do_signal+0x80007f002028 ([kernel.kallsyms])
              7fffa5e8 exit_to_usermode_loop+0x80007f002053 ([kernel.kallsyms])
              ...

Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463374279-97209-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-03 14:53:46 -03:00
Lucas Stach 703e01652d tools lib api: Respect CROSS_COMPILE for the linker
This fixes cross compilation of libapi.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel@pengutronix.de
Cc: patchwork-lst@pengutronix.de
Link: http://lkml.kernel.org/r/1458235670-27341-1-git-send-email-l.stach@pengutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-03 14:53:46 -03:00
Wang Nan 946ae1d41d perf evlist: Fix alloc_mmap() failure path
If zalloc fail, setting evlist->mmap[i].fd is unsafe and
perf_evlist__alloc_mmap() should bail out right after that.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: d4c6fb36ac ("perf evsel: Record fd into perf_mmap")
Link: http://lkml.kernel.org/r/1464699975-230440-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-03 14:53:46 -03:00
Arnaldo Carvalho de Melo 90525176d7 perf evsel: Provide way to extract integer value from format_field
Out of perf_evsel__intval(), that requires passing the variable name,
that will then be searched in the list of tracepoint variables for the
given evsel.

In cases such as syscall file descriptor ("fd") tracking, this is
wasteful, we need just to use perf_evsel__field() and cache the
format_field.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r6f89jx9j5nkx037d0naviqy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-03 14:53:46 -03:00
Vineet Gupta dc89e75a94 tools/perf: Handle -EOPNOTSUPP for sampling events
This allows (with a previous change to the perf error return ABI) for
calling out in userspace the exact reason for perf record failing
when PMU doesn't support overflow interrupts.

Note that this needs to be put ahead of existing precise_ip check as
that gets hit otherwise for the sampling fail case as well.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@redhat.com>
Cc: <linux-snps-arc@lists.infradead.org>
Cc: <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1462786660-2900-2-git-send-email-vgupta@synopsys.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-03 09:41:11 +02:00
John Stultz 1a77e2bd8c kselftests: timers: Add set-tz test case
Mika Westerberg reported a erroneous change in the error
checking of settimeofday, so I wanted to add a test to ensure
we don't trip over this again.

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-06-02 16:39:56 -06:00
Masami Hiramatsu 01412261d9 perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid
Use path/to/bin/buildid/elf instead of path/to/bin/buildid
to store corresponding elf binary.
This also stores vdso in buildid/vdso, kallsyms in buildid/kallsyms.

Note that the existing caches are not updated until user adds
or updates the cache. Anyway, if there is the old style build-id
cache it falls back to use it. (IOW, it is backward compatible)

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151537.16098.85815.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 13:15:03 -03:00
Masami Hiramatsu 4e4b6c0668 perf symbols: Cleanup the code flow of dso__find_kallsyms
Cleanup the code flow of dso__find_kallsyms() to remove redundant
checking code and add some comment for readability.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151522.16098.43446.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 13:15:02 -03:00
Masami Hiramatsu 11870d714a perf symbols: Introduce filename__readable to check readability
Introduce filename__readable to check readability by opening the file
directly. Since the access(R_OK) just checks the readability based on
real UID/GID, it is ignored that the effective UID/GID and capabilities
for some special file (e.g.  /proc/kcore).

filename__readable() directly opens given file with O_RDONLY so that the
kernel checks it by effective UID/GID and capabilities.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151513.16098.97576.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 13:15:01 -03:00
Taeung Song dcd1e2a7ba perf tools: Add arch/*/include/generated/ to .gitignore
Commit 1b700c9975 ("perf tools: Build syscall table .c header from
kernel's syscall_64.tbl") automatically generates per-arch syscall table
arrays, e.g.:

    arch/x86/include/generated/asm/syscalls_64.c

So add this directory to .gitignore

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 1b700c9975 ("perf tools: Build syscall table .c header from kernel's syscall_64.tbl")
Link: http://lkml.kernel.org/r/1464343274-19403-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:46 -03:00
Wang Nan 258e4bfcbd tools: Pass arg to fdarray__filter's call back function
Before this patch there's no way to pass arguments to fdarray__filter's
call back function.

This improvement will be used by 'perf record' to support unmapping ring
buffer for both main evlist and overwrite evlist. Without this patch
there's no way to track overwrite evlist from 'struct fdarray'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:46 -03:00
Wang Nan 5a5ddeb6e3 perf evlist: Choose correct reading direction according to evlist->backward
Now we have evlist->backward to indicate the mmap direction. Make
perf_evlist__mmap_read() choose right direction automatically.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:45 -03:00
Wang Nan e10e4ef63b perf evlist: Check 'base' pointer before checking refcnt when put a mmap
evlist->mmap[i]->refcnt could be 0 if an evlist has no evsel or if all
evsels don't match the evlist during mmap. For example, when all evsels
are overwritable but the evlist itself is normal. To avoid crashing,
perf should check 'base' pointer before checking refcnt, and raise bug
only when base is not NULL.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-2-git-send-email-wangnan0@huawei.com
[ Renamed 'mmap' variable, it is reserved in old distros such as Ubuntu 12.04, breaking the build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:45 -03:00
Wang Nan f3058a1c19 perf evlist: Don't poll and mmap overwritable events
There's no need to receive events from overwritable ring buffer.
Instead, perf should make them run in background until some external
event of interest takes place.  This patch makes ignores normal events from
overwrite evlists.

Overwritable events must be mapped readonly and backward, so if evlist
and evsel doesn't match (evsel->overwrite is true but either evlist is
read/write or evlist is not backward, and vice versa), skip mapping it.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464056944-166978-3-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:45 -03:00
Wang Nan c45628b0a3 perf record: Robustify perf_event__synth_time_conv()
It is possible that all events in an evlist are overwritable.
perf_event__synth_time_conv() should not crash in this case.
record__pick_pc() is used to check avaliability.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464056944-166978-3-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:44 -03:00
Arnaldo Carvalho de Melo 792d48b4cf perf tools: Per event max-stack settings
The tooling counterpart, now it is possible to do:

  # perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
  # perf evlist -v
  sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
  cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
  cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events

Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:44 -03:00
Andi Kleen 480ca357fd perf thread: Adopt get_main_thread from db-export.c
Move the get_main_thread function from db-export.c to thread.c so that
it can be used elsewhere.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464051145-19968-2-git-send-email-andi@firstfloor.org
[ Removed leftover bits from db-export.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30 12:41:43 -03:00
Crestez Dan Leonard 7c7e9dad70 iio: iio_generic_buffer: Add --trigger-num option
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 20:42:50 +01:00
Crestez Dan Leonard de397db8ab iio: iio_generic_buffer: Add --device-num option
This makes it possible to distinguish between iio devices with the same
name.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 20:39:41 +01:00
Crestez Dan Leonard 4f20d5927b iio: iio_generic_buffer: Cleanup when receiving signals
This will clean (disable buffer/trigger/channels) when doing
something like a CTRL-C. Otherwise restarting generic_buffer requires a
manual echo 0 > buffer/enable

This also cleanup up all the code freeing string buffers at
the end of main. We initialize all pointers to NULL so that cleanup can
all be done under a single error label.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 20:37:23 +01:00
Daniel Baluta 5d48d6b020 tools: iio: Rename generic_buffer to iio_generic_buffer
This makes it clear that generic_buffer is an IIO tool
and also complies with filename conventions in tools/iio.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 19:56:33 +01:00
Peter Robinson 0c4b650029 tools: iio: Add ability to install/uninstall
Add options to the Makefile for install/uninstall similar to other tools.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 19:48:04 +01:00
Linus Torvalds e28e909c36 - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat
(kvm_stat had nothing to do with QEMU in the first place -- the tool
    only interprets debugfs)
 - expose per-vm statistics in debugfs and support them in kvm_stat
   (KVM always collected per-vm statistics, but they were summarised into
    global statistics)
 
 x86:
  - fix dynamic APICv (VMX was improperly configured and a guest could
    access host's APIC MSRs, CVE-2016-4440)
  - minor fixes
 
 ARM changes from Christoffer Dall:
  "This set of changes include the new vgic, which is a reimplementation
   of our horribly broken legacy vgic implementation.  The two
   implementations will live side-by-side (with the new being the
   configured default) for one kernel release and then we'll remove the
   legacy one.
 
   Also fixes a non-critical issue with virtual abort injection to
   guests."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJXRz0KAAoJEED/6hsPKofosiMIAIHmRI+9I6VMNmQe5vrZKz9/
 vt89QGxDJrFQwhEuZovenLEDaY6rMIJNguyvIbPhNuXNHIIPWbe6cO6OPwByqkdo
 WI/IIqcAJN/Bpwt4/Y2977A5RwDOwWLkaDs0LrZCEKPCgeh9GWQf+EfyxkDJClhG
 uIgbSAU+t+7b05K3c6NbiQT/qCzDTCdl6In6PI/DFSRRkXDaTcopjjp1PmMUSSsR
 AM8LGhEzMer+hGKOH7H5TIbN+HFzAPjBuDGcoZt0/w9IpmmS5OMd3ZrZ320cohz8
 zZQooRcFrT0ulAe+TilckmRMJdMZ69fyw3nzfqgAKEx+3PaqjKSY/tiEgqqDJHY=
 =EEBK
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second batch of KVM updates from Radim Krčmář:
 "General:

   - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat (kvm_stat
     had nothing to do with QEMU in the first place -- the tool only
     interprets debugfs)

   - expose per-vm statistics in debugfs and support them in kvm_stat
     (KVM always collected per-vm statistics, but they were summarised
     into global statistics)

  x86:

   - fix dynamic APICv (VMX was improperly configured and a guest could
     access host's APIC MSRs, CVE-2016-4440)

   - minor fixes

  ARM changes from Christoffer Dall:

   - new vgic reimplementation of our horribly broken legacy vgic
     implementation.  The two implementations will live side-by-side
     (with the new being the configured default) for one kernel release
     and then we'll remove the legacy one.

   - fix for a non-critical issue with virtual abort injection to guests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits)
  tools: kvm_stat: Add comments
  tools: kvm_stat: Introduce pid monitoring
  KVM: Create debugfs dir and stat files for each VM
  MAINTAINERS: Add kvm tools
  tools: kvm_stat: Powerpc related fixes
  tools: Add kvm_stat man page
  tools: Add kvm_stat vm monitor script
  kvm:vmx: more complete state update on APICv on/off
  KVM: SVM: Add more SVM_EXIT_REASONS
  KVM: Unify traced vector format
  svm: bitwise vs logical op typo
  KVM: arm/arm64: vgic-new: Synchronize changes to active state
  KVM: arm/arm64: vgic-new: enable build
  KVM: arm/arm64: vgic-new: implement mapped IRQ handling
  KVM: arm/arm64: vgic-new: Wire up irqfd injection
  KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable
  KVM: arm/arm64: vgic-new: vgic_init: implement map_resources
  KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init
  KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create
  KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init
  ...
2016-05-27 13:41:54 -07:00
Wang Nan 5ea5888b2f perf ctf: Convert invalid chars in a string before set value
We observed some crazy apps on Android set their comm to unprintable
string. For example:

  # cat /proc/10607/task/*/comm
  tencent.qqmusic
  ...
  Binder_2
  日志输出线  <-- Chinese word 'log output thread'
  WifiManager
  ...

'perf data convert' fails to convert perf.data with such string to CTF format.

For example:

  # cat << EOF > ./badguy.c
  #include <sys/prctl.h>
  int main(int argc, char *argv[])
  {
         prctl(PR_SET_NAME, "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf");
         while(1)
                 sleep(1);
         return 0;
  }
  EOF
  # gcc ./badguy.c
  # perf record -e sched:* ./a.out
  # perf data convert --to-ctf ./bad.ctf
  CTF stream 4 flush failed
  [ perf data convert: Converted 'perf.data' into CTF data './bad.ctf' ]
  [ perf data convert: Converted and wrote 0.008 MB (78 samples)  ]
  # babeltrace ./bad.ctf/
  [error] Packet size (18446744073709551615 bits) is larger than remaining file size (262144 bits).
  [error] Stream index creation error.
  [error] Open file stream error.
  [warning] [Context] Cannot open_trace of format ctf at path ./bad.ctf.
  [warning] [Context] cannot open trace "./bad.ctf" from ./bad.ctf/ for reading.
  [error] Cannot open any trace for reading.

  [error] opening trace "./bad.ctf/" for reading.

  [error] none of the specified trace paths could be opened.

This patch converts unprintable characters to hexadecimal word.

After applying this patch the above test works correctly:

  # ~/perf data convert --to-ctf ./good.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './good.ctf' ]
  [ perf data convert: Converted and wrote 0.008 MB (78 samples) ]
  # babeltrace ./good.ctf
  ..
  [23:14:35.491665268] (+0.000001100) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5123, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 }
  [23:14:35.491666230] (+0.000000962) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5122, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 }
  ..

Committer note:

To build perf with libabeltrace, use:

  $ mkdir -p /tmp/build/perf
  $ make LIBBABELTRACE=1 LIBBABELTRACE_DIR=/usr/local O=/tmp/build/perf -C tools/perf install-bin

Or equivalent (no O=, fixup LIBBABELTRACE_DIR, etc).

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464348951-179595-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-27 12:08:40 -03:00
Wang Nan 3dc6c1d54f perf record: Fix crash when kptr is restricted
Before this patch, a simple 'perf record' could fail if kptr_restrict is
set to 1 (for normal user) or 2 (for root):

  # perf record ls
  WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
  check /proc/sys/kernel/kptr_restrict.

  Samples in kernel functions may not be resolved if a suitable vmlinux
  file is not found in the buildid cache or in the vmlinux path.

  Samples in kernel modules won't be resolved at all.

  If some relocation was applied (e.g. kexec) symbols may be misresolved
  even with a suitable vmlinux or kallsyms file.

  Segmentation fault (core dumped)

This patch skips perf_event__synthesize_kernel_mmap() when kptr is not
available.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 45e9005690 ("perf machine: Do not bail out if not managing to read ref reloc symbol")
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464081688-167940-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-27 09:41:39 -03:00
Wang Nan 38272dc4f1 perf symbols: Check kptr_restrict for root
If kptr_restrict is set to 2, even root is not allowed to see pointers.
This patch checks kptr_restrict even if euid == 0. For root, report
error if kptr_restrict is 2.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464081688-167940-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-27 09:41:23 -03:00
Linus Torvalds 5b26fc8824 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
   unexports symbols which are not used in the current config [Nicolas
   Pitre]

 - several kbuild rule cleanups [Masahiro Yamada]

 - warning option adjustments for gcov etc [Arnd Bergmann]

 - a few more small fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
  kbuild: move -Wunused-const-variable to W=1 warning level
  kbuild: fix if_change and friends to consider argument order
  kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
  kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
  gcov: disable -Wmaybe-uninitialized warning
  gcov: disable tree-loop-im to reduce stack usage
  gcov: disable for COMPILE_TEST
  Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
  Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
  kbuild: forbid kernel directory to contain spaces and colons
  kbuild: adjust ksym_dep_filter for some cmd_* renames
  kbuild: Fix dependencies for final vmlinux link
  kbuild: better abstract vmlinux sequential prerequisites
  kbuild: fix call to adjust_autoksyms.sh when output directory specified
  kbuild: Get rid of KBUILD_STR
  kbuild: rename cmd_as_s_S to cmd_cpp_s_S
  kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
  kbuild: drop redundant "PHONY += FORCE"
  kbuild: delete unnecessary "@:"
  kbuild: mark help target as PHONY
  ...
2016-05-26 22:01:22 -07:00
Linus Torvalds bdc6b758e4 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Mostly tooling and PMU driver fixes, but also a number of late updates
  such as the reworking of the call-chain size limiting logic to make
  call-graph recording more robust, plus tooling side changes for the
  new 'backwards ring-buffer' extension to the perf ring-buffer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  perf record: Read from backward ring buffer
  perf record: Rename variable to make code clear
  perf record: Prevent reading invalid data in record__mmap_read
  perf evlist: Add API to pause/resume
  perf trace: Use the ptr->name beautifier as default for "filename" args
  perf trace: Use the fd->name beautifier as default for "fd" args
  perf report: Add srcline_from/to branch sort keys
  perf evsel: Record fd into perf_mmap
  perf evsel: Add overwrite attribute and check write_backward
  perf tools: Set buildid dir under symfs when --symfs is provided
  perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
  perf annotate: Sort list of recognised instructions
  perf annotate: Fix identification of ARM blt and bls instructions
  perf tools: Fix usage of max_stack sysctl
  perf callchain: Stop validating callchains by the max_stack sysctl
  perf trace: Fix exit_group() formatting
  perf top: Use machine->kptr_restrict_warned
  perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
  perf machine: Do not bail out if not managing to read ref reloc symbol
  perf/x86/intel/p4: Trival indentation fix, remove space
  ...
2016-05-25 17:05:40 -07:00
Linus Torvalds c4a346002b Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool build fix from Ingo Molnar:
 "An libtool fix for older libelf versions"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Allow building with older libelf
2016-05-25 16:52:19 -07:00
Linus Torvalds 24c82fbb86 Merge branch 'parisc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:

 - Add native high-resolution timing code for sched_clock() and other
   timing functions based on the processor internal cr16 cycle counters

 - Add syscall tracepoint support

 - Add regset support

 - Speed up get_user() and put_user() functions

 - Updated futex.h to match generic implementation (John David Anglin)

 - A few smaller ftrace build fixes

 - Fixed thuge-gen kernel self test to utilize architectured MAP_HUGETLB
   value

 - Added parisc architecture to seccomp_bpf kernel self test

 - Various typo fixes (Andrea Gelmini)

* 'parisc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Whitespace cleanups in unistd.h
  parisc: Use long jump to reach ftrace_return_to_handler()
  parisc: Fix typo in fpudispatch.c
  parisc: Fix typos in eisa_eeprom.h
  parisc: Fix typo in ldcw.h
  parisc: Fix typo in pdc.h
  parisc: Update futex.h to match generic implementation
  parisc: Merge ftrace C-helper and assembler functions into .text.hot section
  selftests/thuge-gen: Use platform specific MAP_HUGETLB value
  parisc: Add native high-resolution sched_clock() implementation
  parisc: Add ARCH_TRACEHOOK and regset support
  parisc: Add 64bit get_user() and put_user() for 32bit kernel
  parisc: Simplify and speed up get_user() and put_user()
  parisc: Add syscall tracepoint support
2016-05-25 09:27:52 -07:00