With all the size field updates out of the way xfs_file_aio_write can
be further simplified by pushing all iolock handling into
xfs_file_dio_aio_write and xfs_file_buffered_aio_write and using
the generic generic_write_sync helper for synchronous writes.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
While xfs_iunlock is fine with 0 lockflags the calling conventions are much
cleaner if xfs_file_aio_write_checks never returns without the iolock held.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we use the VFS i_size field throughout XFS there is no need for the
i_new_size field any more given that the VFS i_size field gets updated
in ->write_end before unlocking the page, and thus is always uptodate when
writeback could see a page. Removing i_new_size also has the advantage that
we will never have to trim back di_size during a failed buffered write,
given that it never gets updated past i_size.
Note that currently the generic direct I/O code only updates i_size after
calling our end_io handler, which requires a small workaround to make
sure di_size actually makes it to disk. I hope to fix this properly in
the generic code.
A downside is that we lose the support for parallel non-overlapping O_DIRECT
appending writes that recently was added. I don't think keeping the complex
and fragile i_new_size infrastructure for this is a good tradeoff - if we
really care about parallel appending writers we should investigate turning
the iolock into a range lock, which would also allow for parallel
non-overlapping buffered writers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no fundamental need to keep an in-memory inode size copy in the XFS
inode. We already have the on-disk value in the dinode, and the separate
in-memory copy that we need for regular files only in the XFS inode.
Remove the xfs_inode i_size field and change the XFS_ISIZE macro to use the
VFS inode i_size field for regular files. Switch code that was directly
accessing the i_size field in the xfs_inode to XFS_ISIZE, or in cases where
we are limited to regular files direct access of the VFS inode i_size field.
This also allows dropping some fairly complicated code in the write path
which dealt with keeping the xfs_inode i_size uptodate with the VFS i_size
that is getting updated inside ->write_end.
Note that we do not bother resetting the VFS i_size when truncating a file
that gets freed to zero as there is no point in doing so because the VFS inode
is no longer in use at this point. Just relax the assert in xfs_ifree to
only check the on-disk size instead.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Replace i_pin_wait, which is only used during synchronous inode flushing
with a bit waitqueue. This trades off a much smaller inode against
slightly slower wakeup performance, and saves 12 (32-bit) or 20 (64-bit)
bytes in the XFS inode.
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
We almost never block on i_flock, the exception is synchronous inode
flushing. Instead of bloating the inode with a 16/24-byte completion
that we abuse as a semaphore just implement it as a bitlock that uses
a bit waitqueue for the rare sleeping path. This primarily is a
tradeoff between a much smaller inode and a faster non-blocking
path vs faster wakeups, and we are much better off with the former.
A small downside is that we will lose lockdep checking for i_flock, but
given that it's always taken inside the ilock that should be acceptable.
Note that for example the inode writeback locking is implemented in a
very similar way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To be used for bit wakeup i_flags needs to be an unsigned long or we'll
run into trouble on big endian systems. Because of the 1-byte i_update
field right after it this actually causes a fairly large size increase
on its own (4 or 8 bytes), but that increase will be more than offset
by the next two patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
We spent a lot of effort to maintain this field, but it always equals to the
fork size divided by the constant size of an extent. The prime use of it is
to assert that the two stay in sync. Just divide the fork size by the extent
size in the few places that we actually use it and remove the overhead
of maintaining it. Also introduce a few helpers to consolidate the places
where we actually care about the value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
.. and the just as dead bhv_desc forward declaration while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Replace the nasty if, else if, elseif condition with more natural C flow
that expressed the logic we want here better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This wrapper isn't overly useful, not to say rather confusing.
Around the call to xfs_itruncate_extents it does:
- add tracing
- add a few asserts in debug builds
- conditionally update the inode size in two places
- log the inode
Both the tracing and the inode logging can be moved to xfs_itruncate_extents
as they are useful for the attribute fork as well - in fact the attr code
already does an equivalent xfs_trans_log_inode call just after calling
xfs_itruncate_extents. The conditional size updates are a mess, and there
was no reason to do them in two places anyway, as the first one was
conditional on the inode having extents - but without extents we
xfs_itruncate_extents would be a no-op and the placement wouldn't matter
anyway. Instead move the size assignments and the asserts that make sense
to the callers that want it.
As a side effect of this clean up xfs_setattr_size by introducing variables
for the old and new inode size, and moving the size updates into a common
place.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
Kconfig: acpi: Fix typo in comment.
misc latin1 to utf8 conversions
devres: Fix a typo in devm_kfree comment
btrfs: free-space-cache.c: remove extra semicolon.
fat: Spelling s/obsolate/obsolete/g
SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
tools/power turbostat: update fields in manpage
mac80211: drop spelling fix
types.h: fix comment spelling for 'architectures'
typo fixes: aera -> area, exntension -> extension
devices.txt: Fix typo of 'VMware'.
sis900: Fix enum typo 'sis900_rx_bufer_status'
decompress_bunzip2: remove invalid vi modeline
treewide: Fix comment and string typo 'bufer'
hyper-v: Update MAINTAINERS
treewide: Fix typos in various parts of the kernel, and fix some comments.
clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
leds: Kconfig: Fix typo 'D2NET_V2'
sound: Kconfig: drop unknown symbol ARCH_CLPS7500
...
Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
PM / Hibernate: Implement compat_ioctl for /dev/snapshot
PM / Freezer: fix return value of freezable_schedule_timeout_killable()
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
...
Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (22 commits)
xfs: mark the xfssyncd workqueue as non-reentrant
xfs: simplify xfs_qm_detach_gdquots
xfs: fix acl count validation in xfs_acl_from_disk()
xfs: remove unused XBT_FORCE_SLEEP bit
xfs: remove XFS_QMOPT_DQSUSER
xfs: kill xfs_qm_idtodq
xfs: merge xfs_qm_dqinit_core into the only caller
xfs: add a xfs_dqhold helper
xfs: simplify xfs_qm_dqattach_grouphint
xfs: nest qm_dqfrlist_lock inside the dquot qlock
xfs: flatten the dquot lock ordering
xfs: implement lazy removal for the dquot freelist
xfs: remove XFS_DQ_INACTIVE
xfs: cleanup xfs_qm_dqlookup
xfs: cleanup dquot locking helpers
xfs: remove the sync_mode argument to xfs_qm_dqflush_all
xfs: remove xfs_qm_sync
xfs: make sure to really flush all dquots in xfs_qm_quotacheck
xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflush
xfs: remove the lid_size field in struct log_item_desc
...
Fix up trivial conflict in fs/xfs/xfs_sync.c
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When finding the longest extent in an AG, we read the value directly
out of the AGF buffer without endian conversion. This will give an
incorrect length, resulting in FITRIM operations potentially not
trimming everything that it should.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Since Linux 2.6.36 the writeback code has introduces various measures for
live lock prevention during sync(). Unfortunately some of these are
actively harmful for the XFS model, where the inode gets marked dirty for
metadata from the data I/O handler.
The older_than_this checks that are now more strictly enforced since
writeback: avoid livelocking WB_SYNC_ALL writeback
by only calling into __writeback_inodes_sb and thus only sampling the
current cut off time once. But on a slow enough devices the previous
asynchronous sync pass might not have fully completed yet, and thus XFS
might mark metadata dirty only after that sampling of the cut off time for
the blocking pass already happened. I have not myself reproduced this
myself on a real system, but by introducing artificial delay into the
XFS I/O completion workqueues it can be reproduced easily.
Fix this by iterating over all XFS inodes in ->sync_fs and log all that
are dirty. This might log inode that only got redirtied after the
previous pass, but given how cheap delayed logging of inodes is it
isn't a major concern for performance.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If the writeback code writes back an inode because it has expired we currently
use the non-blockin ->write_inode path. This means any inode that is pinned
is skipped. With delayed logging and a workload that has very little log
traffic otherwise it is very likely that an inode that gets constantly
written to is always pinned, and thus we keep refusing to write it. The VM
writeback code at that point redirties it and doesn't try to write it again
for another 30 seconds. This means under certain scenarious time based
metadata writeback never happens.
Fix this by calling into xfs_log_inode for kupdate in addition to data
integrity syncs, and thus transfer the inode to the log ASAP.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
* master: (848 commits)
SELinux: Fix RCU deref check warning in sel_netport_insert()
binary_sysctl(): fix memory leak
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
ipmi_watchdog: restore settings when BMC reset
oom: fix integer overflow of points in oom_badness
memcg: keep root group unchanged if creation fails
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
nilfs2: unbreak compat ioctl
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
evm: prevent racing during tfm allocation
evm: key must be set once during initialization
mmc: vub300: fix type of firmware_rom_wait_states module parameter
Revert "mmc: enable runtime PM by default"
mmc: sdhci: remove "state" argument from sdhci_suspend_host
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
IB/qib: Correct sense on freectxts increment and decrement
RDMA/cma: Verify private data length
cgroups: fix a css_set not found bug in cgroup_attach_proc
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
...
Conflicts:
kernel/cgroup_freezer.c
On a system with lots of memory pressure that is stuck on synchronous inode
reclaim the workqueue code will run one instance of the inode reclaim work
item on every CPU. which is not what we want. Make sure to mark the
xfssyncd workqueue as non-reentrant to make sure there only is one instace
of each running globally. Also stop using special paramater for the
workqueue; now that we guarantee each fs has only running one of each works
at a time there is no need to artificially lower max_active and compensate
for that by setting the WQ_CPU_INTENSIVE flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no reason to drop qi_dqlist_lock around calls to xfs_qm_dqrele
because the free list lock now nests inside qi_dqlist_lock and the
dquot lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commit fa8b18ed didn't prevent the integer overflow and possible
memory corruption. "count" can go negative and bypass the check.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
XBT_FORCE_SLEEP is no longer ever tested; it is only set
and cleared. Remove it.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Just read the id 0 dquot from disk directly in xfs_qm_init_quotainfo instead
of going through dqget and requiring a special flag to not add the dquot to
any lists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This function doesn't help the code flow, so merge the dquot allocation and
transaction handling into xfs_qm_dqread.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Factor the common pattern of:
xfs_dqlock(dqp);
XFS_DQHOLD(dqp);
xfs_dqunlock(dqp);
into a new helper, and remove XFS_DQHOLD now that only one other caller
is left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
No need to play games with the qlock now that the freelist lock nests inside
it. Also clean up various outdated comments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Allow xfs_qm_dqput to work without trylock loops by nesting the freelist lock
inside the dquot qlock. In turn that requires trylocks in the reclaim path
instead, but given it's a classic tradeoff between fast and slow path, and
we follow the model of the inode and dentry caches.
Document our new lock order now that it has settled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Introduce a new XFS_DQ_FREEING flag that tells lookup and mplist walks
to skip a dquot that is beeing freed, and use this avoid the trylock
on the hash and mplist locks in xfs_qm_dqreclaim_one. Also simplify
xfs_dqpurge by moving the inodes to a dispose list after marking them
XFS_DQ_FREEING and avoid the locker ordering constraints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Do not remove dquots from the freelist when we grab a reference to them in
xfs_qm_dqlookup, but leave them on the freelist util scanning notices that
they have a reference. This speeds up the lookup fastpath, and greatly
simplifies the lock ordering constraints. Note that the same scheme is
used by the VFS inode and dentry caches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Free dquots when purging them during umount instead of keeping them around
on the freelist in a degraded state. The out of order locking in
xfs_qm_dqpurge will be removed again later in this series.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Rearrange the code to avoid the conditional locking around the flist_locked
variable. This means we lose a (rather pointless) assert, and hold the
freelist lock a bit longer for one corner case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Mark the trivial lock wrappers as inline, and make the naming consistent
for all of them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
It always is zero, and removing it will make future changes easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we can't have any dirty dquots around that aren't in the AIL we
can get rid of the explicit dquot syncing from xfssyncd and xfs_fs_sync_fs
and instead rely on AIL pushing to write out any quota updates.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Make sure we do not skip any dquots when flushing them out after a
quotacheck to make sure that we will never have any dirty dquots on a
live filesystem. At this point no dquot should be pinnable, but lets
be pedantic about it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Only skip pinned dquots if SYNC_TRYLOCK is specified, and adjust the callers
to keep the behaviour unchanged.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Outside the now removed nodelaylog code this field is only used for
asserts and can be safely removed now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that the nodelaylog mode is gone we can simplify the transaction commit
path a bit by removing the xfs_trans_commit_cil routine. Restoring the
process flags is merged into xfs_trans_commit which already does it for
the error path, and allocating the log vectors is merged into
xlog_cil_format_items, which already fills them with data, thus avoiding
one loop over all log items.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The delaylog mode has been the default for a long time, and the nodelaylog
option has been scheduled for removal in Linux 3.3. Remove it and code
only used by it now that we have opened the 3.3 window.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Apply the scheme used in log_regrant_write_log_space to wake up any other
threads waiting for log space before the newly added one to
log_regrant_write_log_space as well, and factor the code into readable
helpers. For each of the queues we have add two helpers:
- one to try to wake up all waiting threads. This helper will also be
usable by xfs_log_move_tail once we remove the current opportunistic
wakeups in it.
- one to sleep on t_wait until enough log space is available, loosely
modelled after Linux waitqueues.
And use them to reimplement the guts of log_regrant_write_log_space and
log_regrant_write_log_space. These two function now use one and the same
algorithm for waiting on log space instead of subtly different ones before,
with an option to completely unify them in the near future.
Also move the filesystem shutdown handling to the common caller given
that we had to touch it anyway.
Based on hard debugging and an earlier patch from
Chandra Seetharaman <sekharan@us.ibm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Tested-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Christoph Hellwig