For driver debugfs, debugfs_remove_recursive() is called which is not
needed as it is already done in ASoC core debugfs. And a device managed
memory need not be freed explicitly as device core frees it up. So
remove unnecessary skl_debugfs_exit().
Fixes: 5cdf6c09ca ASoC: ("Intel: Skylake: Add debugfs support")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit bdd0384a5a ("ASoC: Intel: Skylake: Add support to read firmware
registers") introduced firmware register read so added sst-dsp-priv.h but
missed adding sst-dsp.h as that leads to below compiler warning:
In file included from sound/soc/intel/skylake/skl-debug.c:23:0:
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
'struct sst_pdata' declared inside parameter list [enabled by default]
int (*init)(struct sst_dsp *sst, struct sst_pdata *pdata);
^
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
its scope is only this definition or declaration, which is probably
not what you want [enabled by default]
So add the missing header.
Fixes: bdd0384a5a ("ASoC: Intel: Skylake: Add support to read firmware registers")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
GPIO_MASK was introduced in commit "df694daa3c01 [ALSA] hda-codec - Add
the support of ALC262,ALC883,ALC885,ALC861" but it's not being used. So
we can simply remove it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PIN number for Dell headset mode of ALC3271 is wrong.
Fixes: fcc6c877a0 ("ALSA: hda/realtek - Support Dell headset mode for ALC3271")
Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
platform_get_irq() returns an error code, but the ac97c
driver ignores it and always returns -ENXIO. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error.
Print and propagate the return value of platform_get_irq on failure.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
platform_get_irq() returns an error code, but the intel_hdmi_audio
driver ignores it and always returns -ENODEV. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly. Also,
notice that platform_get_irq() no longer returns 0 on error.
Print error message and propagate the return value of platform_get_irq
on failure.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SRAM address and memory window size differ for different platforms.
So add members to sst_addr structure and initialize them in the
respective dsp_init().
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver modules have lot of information represented in struct
skl_module_cfg. Knowing this is useful for debug, so enable
debugfs for this structure.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For debug, the kernel debugfs mechanism is available. We can add various
debug options for driver like module configuration read, firmware register
read etc.
This patch adds debugfs as a child to asoc plaform component and caller is
added for skylake driver to do init and cleanup of debugfs.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Vunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/soc-core.c:1961:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 98faf436ee ("ASoC: Drop invalid DMI fields when setting card long name from DMI info")
CC: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For making the development easier, add quirk module option to override
the platform data setup. For example, a platform with inverted jack
detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 =
jd_mode=2). It overrides the whole pdata fields, so pass it
carefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: James Cameron <quozl@laptop.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays path and cmd_case on the stack but make
them static const. Makes the object code smaller:
Before:
text data bss dec hex filename
2673 624 0 3297 ce1 sound/soc/sh/rcar/cmd.o
After:
text data bss dec hex filename
2398 768 0 3166 c5e sound/soc/sh/rcar/cmd.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's very common that audio card has a machine level amplifier which is
controlled by GPIO. The patch adds DAPM widgets and routing support
into audio-graph-card driver, and creates an output driver widget with
event to control the amplifier via GPIO.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We will set some volatile registers in jack detection function. But
those volatile registers will be clear in rt5665_calibrate function
because we set cache bypass and reset codec in rt5665_calibrate function.
This patch add a flag to make sure that rt5665_calibrate is done
before starting jack detection.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
8172 920 0 9092 2384 sound/soc/sh/rcar/core.o
File size After adding 'const':
text data bss dec hex filename
8364 728 0 9092 2384 sound/soc/sh/rcar/core.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The property type of "nuvoton,crosstalk-bypass" changes to boolean.
The document is updated as well.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some DAPM widget types to better support the construction of DAPM
graphs within DSPs.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_TPLG_INDEX_ALL is used by drivers to tell the core to load
all topology component indexes, not just the index in the header.
Fix this so that SND_SOC_TPLG_INDEX_ALL will load all components no matter
their index.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays fs_list and ps_list on the stack but make
them static const. Makes the object code smaller:
Before:
text data bss dec hex filename
12084 4888 64 17036 428c sound/soc/codecs/ak4642.o
After:
text data bss dec hex filename
11883 5032 64 16979 4253 sound/soc/codecs/ak4642.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
0x0285 Device ID was not used.
It just assigned for alias of ALC293 as backup.
So, remove it first.
Because our new codec will use this device ID.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit fcc88d91cd ("ALSA: hda - Bind with i915 component
before codec binding"), the binding with i915 audio component is moved
to be performed always at probing the controller. This fixed the
potential problems on IVB, but now it brought another issue on HSW and
BDW. These two platforms give two individual HD-audio controllers,
one for the analog codec on PCH and another for HDMI over gfx. Since
I decided to take a lazy path to check only AZX_DRIVER_PCH type in the
commit above, now both controllers try to bind with i915, and you see
a kernel WARNING.
This patch tries to address it again properly. Now a new DCAPS bit,
AZX_DCAPS_I915_COMPONENT, is introduced for indicating the binding
with i915 component in addition to the existing I915_POWERWELL bit
flag. Each PCI entry has to give this new flag if it requires the
binding with i915 component. For HSW/BDW PCH (i.e. the ones defined
by AZX_DCAPS_INTEL_PCH) doesn't contain AZX_DCAPS_I915_COMPONENT bit
while others have it.
While we're at it, add parentheses around the bit flag check for
avoiding possible compiler warnings, too.
The bug was spotted by Intel CI tests.
Fixes: fcc88d91cd ("ALSA: hda - Bind with i915 component before codec binding")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196219
Reported-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/device.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
995 608 0 1603 643 sound/pci/hda/hda_sysfs.o
File size After adding 'const':
text data bss dec hex filename
1035 544 0 1579 62b sound/pci/hda/hda_sysfs.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/device.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
9781 240 8 10029 272d sound/core/pcm.o
File size After adding 'const':
text data bss dec hex filename
9813 176 8 9997 270d sound/core/pcm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add DELL4_MIC_NO_PRESENCE model.
Add the pin configuration value of this machine into the pin_quirk
table to make DELL4_MIC_NO_PRESENCE apply to this machine.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch is uploaded for enabling the speaker protection features
of the audio codec.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move set_sysclk to codec level and people can use it at both
codec and dai level.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
{ "ADC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll }, and
{ "ADC Stereo2 Filter", NULL, "PLL1", is_sys_clk_from_pll }, are
defined twice in the driver.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we select "IF1_ADC4" for IF1 ADC Muxes, it is actually connected
to "TxDP_ADC" widget. This patch fixes the audio route and remove the
unexisting "IF1_ADC4" widget.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add debug message for crosstalk function bypass.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Added quirk DW_I2S_QUIRK_16BIT_IDX_OVERRIDE to Designware
driver. This quirk will set idx value to 1.
By setting this quirk, it will override supported format
as 16 bit resolution and bus width as 2 Bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo platforms use RT5670 with Baytrail, add the required
MCLK control and configuration to 19.2MHz
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes DMI fields may be invalid and so can't give useful vendor,
product or board info, such as "Type2 - Board Manufacturer" or
"Type1 - TBD by OEM". Including such invalid DMI fileds may create silly
card long name. So this patch creates a black list of invalid strings.
And if a DMI field contains any string in this list, it will be excluded
from the card long name.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The timer may still be running when rt5645_i2c_remove() gets called,
call del_timer_sync() to make sure it is stopped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
GPD Win requires jd_mode=3 and the inverted flag for making the jack
detection working. Unfortunately, the BIOS doesn't give a nice way to
match with DMI strings, and the only working way so far is to match
with the board vendor/name/version/date to some known patterns.
Hopefully other vendors won't do such a stupid setup, too...
Thanks to Hans de Goede for the DMI matching suggestion.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The flag will invert jd1_1 status. Which will be used if the jack
connector is normal closed.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The jd_invert flag is actually used for level triggered IRQ. Rename
it to let code more readable.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Read the jd status after invert control. The benefit is we don't need
to invert the reading jd status when jd invert is needed.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
We used a on-demand i915 component binding for IvyBridge and
SandyBridge HDMI codecs, but it has a potential problem of the nested
module loading. For avoiding that situation, assure the i915 binding
happening at the controller driver level for PCH controller devices,
where the initialization is performed in a detached work, instead of
calling from the codec driver probe.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's nonsense to register a card object when no codec is bound on it,
as we don't support the deferred codec binding. Instead of
registering an empty card object, just skip the registration by
returning an error from azx_codec_configure().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
azx_codec_configure() loops over the codecs found on the given
controller via a linked list. The code used to work in the past, but
in the current version, this may lead to an endless loop when a codec
binding returns an error.
The culprit is that the snd_hda_codec_configure() unregisters the
device upon error, and this eventually deletes the given codec object
from the bus. Since the list is initialized via list_del_init(), the
next object points to the same device itself. This behavior change
was introduced at splitting the HD-audio code code, and forgotten to
adapt it here.
For fixing this bug, just use a *_safe() version of list iteration.
Fixes: d068ebc25e ("ALSA: hda - Move some codes up to hdac_bus struct")
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 3d774d5ef0 ("ALSA: seq: Allow the tristate build of
OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a
couple of places were forgotten, namely, opl3 and emux Makefile.
These contain the line like
snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
and this doesn't work any longer as expected because snd-opl3-synth
can be built-in while CONFIG_SND_SEQUENCER_OSS=m.
This patch fixes these places to build properly for the new kconfig
dependency. In the end, we had to use ifneq() to satisfy the
requirement. It's a bit ugly, but lesser evil.
Fixes: 3d774d5ef0 ("ALSA: seq: Allow the tristate build of OSS emulation")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".
Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.
Fixes: 3a65bcdc57 ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that user-space (typically alsa-lib) can specify which protocol
version it supports, we can optimize the kernel code depending on the
reported protocol version.
In this patch, we change the previous hack for enforcing the appl_ptr
sync by disabling status/control mmap. Instead of forcibly disabling
both mmaps, we disable only the control mmap when user-space declares
the supported protocol version new enough. For older user-space,
still both PCM status and control mmaps are disabled when requested by
the driver due to the compatibility reason.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have an ioctl to inform the PCM protocol version the running kernel
supports, but there is no way to know which protocol version the
user-space can understand. This lack of information caused headaches
in the past when we tried to extend the ABI. For example, because we
couldn't guarantee the validity of the reserved bytes, we had to
introduce a new ioctl SNDRV_PCM_IOCTL_STATUS_EXT for assigning a few
new fields in the formerly reserved bits. If we could know that it's
a new alsa-lib, we could assume the availability of the new fields,
thus we could have reused the existing SNDRV_PCM_IOCTL_STATUS.
In order to improve the ABI extensibility, this patch adds a new ioctl
for user-space to inform its supporting protocol version to the
kernel. By reporting the supported protocol from user-space, the
kernel can judge which feature should be provided and which not.
With the addition of the new ioctl, the PCM protocol version is bumped
to 2.0.14, too. User-space checks the kernel protocol version via
SNDRV_PCM_INFO_PVERSION, then it sets the supported version back via
SNDRV_PCM_INFO_USER_PVERSION.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZUGOmAAoJEHm+PkMAQRiGhX8H/3fIhingPD01MBf98U0xGrJo
yIXmhu6nFs7TM0lDVDcHsKgqLQIT69ll7PrSZrMkc1RGUIPINoCuJVuJqDre0kfB
of5TX2KegqSx8h1vOWjGBCBjdYfPGyMdf9icf6KsGc/SlIdhN6WA99kglAjJA0Ve
qPTNagF0ntUNg1lsXffxyfcHqFpyqw/Z/C4ie/byFsn9iJ1VG9mNlTWSud09vhuM
3tvHzTUVAIWWuRrrgrvgqQpnwL+q5BfSDsXScMjBau0EK3RGGqG8EN6Kbkfa7VQ6
aBoeboQjUijSJnVwvySdQ11MChTIOwZdfrNPra/1HD3WJNsSu4BIRt5JcAKcOhc=
=qmSg
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc7' into drm-next
Linux 4.12-rc7
Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
We have a Lenovo machine with the codec ALC294 on it, without the
patch, the Node 0x0b is regarded as the loopback mixer, but the Node
0x0b in this codec is "Vendor Defined Widget" instead of the audio
mixer, please see the log below:
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
And I have consulted with Realtek, so far the ALC234/274/294 all don't
have loopback mixer.
Cc: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently x86 platforms use the PCM status/control mmaps for
transferring the PCM status and appl_ptr between kernel and
user-spaces. The mmap is a most efficient way of communication, but
it has a drawback per its nature, namely, it can't notify the change
explicitly to kernel.
The lack of appl_ptr update notification is a problem on a few
existing drivers, but it's mostly a small issue and negligible.
However, a new type of driver that uses DSP for a deep buffer
management requires the exact position of appl_ptr for calculating the
buffer prefetch size, and the asynchronous appl_ptr update between
kernel and user-spaces becomes a significant problem for it.
How can we enforce user-space to report the appl_ptr update? The way
is relatively simple. Just by disabling the PCM control mmap, the
user-space is supposed to fall back to the mode using SYNC_PTR ioctl,
and the kernel gets control over that. This fallback mode is used in
all non-x86 platforms as default, and also in the 32bit compatible
model on all platforms including x86. It's been implemented already
over a decade, so we can say it's fairly safe and stably working.
With the help of the knowledge above, this patch introduces a new PCM
info flag SNDRV_PCM_INFO_SYNC_APPLPTR for achieving the appl_ptr sync
from user-space. When a driver sets this flag at open, the PCM status
/ control mmap is disabled, which effectively switches to SYNC_PTR
mode in user-space side.
In this version, both PCM status and control mmaps are disabled
although only the latter, control mmap, is the target. It's because
the current alsa-lib implementation supposes that both status and
control mmaps are always coupled, thus it handles a fatal error when
only one of them fails.
Of course, the disablement of the status/control mmaps may bring a
slight performance overhead. Thus, as of now, this should be used
only for the dedicated devices that deserves.
Note that the disablement of mmap is a sort of workaround. In the
later patch, we'll introduce the way to identify the protocol version
alsa-lib supports, and keep mmap working while the sync_ptr is
performed together.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
audio-graph-scu-card can handle below connection which is mainly
for sound mixing purpose.
+----------+ +-------+
| CPU0--+--|-->| Codec |
| | | +-------+
| CPU1--+ |
+----------+
>From OF-graph point of view, it should have
CPU0 <-> Codec, and CPU1 <-> Codec on DT.
But current driver doesn't care about 2nd connection
of Codec, because it is dummy from DPCM point of view.
This patch can care 2nd Codec connection, and it should be
supported from OF-graph point of view.
It still have backward compatibility.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_simple_card_canonicalize_cpu() 2nd param is asking CPU component's
DAI links, not Card links.
This patch fixup it. Otherwise, audio-graph-card can't handle CPU
component correctly if CPU has mult-DAIs and Card uses only one of them
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_simple_card_canonicalize_cpu() 2nd param is asking CPU component's
DAI links, not Card links.
This patch fixup it. Otherwise, audio-graph-card can't handle CPU
component correctly if CPU has mult-DAIs and Card uses only one of them
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make crosstalk functoin optional.
The jack detection can speed up without crosstalk detection.
Let the decision of function usage to platform design.
The patch helps the issue concern as follows:
Google issue 35574278: Chell_headphone pop back from S3
There is a concern as follows:
cras getting blocked for 2 seconds (worst-case 3 seconds)
As I understand, ChromeOS expects resume finishes in 1 seconds.
Video/Audio playing after 3 seconds of resume seems against the spec.
If we really have to make the choice I would choose pop noise instead
of waiting for 3 seconds.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the issue that mic type detection error after resume.
The microphone type detection procedure will recognize
testing signal on JKSLV pin, but before the procedure,
JKSLV already had supply voltage, that results in the failure.
Therefore, the patch turns off the power and reset the jack type
configuration before suspend. Then redo the jack detection
procedure after resume.
The patch help to fix the issue as follows:
Google issue 37973093: CTIA/OMTP jack type detection failure after resume
Reported Issue
Chrome OS Version : ChromeOS R59-9460.13.0
Type of hardware : DVT sample
What steps will reproduce the problem?
(1 Play a music
(2 Insert a headphones
(3 Close laptop lid 3 sec then open it
What is the expected output?
The music is normal in the headphones.
What do you see instead?
Singer voice in the music is not clear.
How frequently does this problem reproduce?
Always
What is the impact to the user, and is there a workaround?
If so, what is it?
Re-insert the headset or close the laptop lid and
then open it again can be repaired.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Assign default value for codec private data when property not given.
If without those default value and property, the codec will work
abnormally.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It adds ASoC driver for AUD96P22 stereo audio codec integrated on ZTE
ZX family SoCs. The driver includes the support for a number of volume
and mute controls, and power bits for various playback and recording
components.
Due to that the board for testing only supports playback, recording
support is untested.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Without CONFIG_I2C, we get a build failure:
sound/soc/codecs/es8316.c:633:1: error: data definition has no type or storage class [-Werror]
sound/soc/codecs/es8316.c:633:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]
sound/soc/codecs/es8316.c:633:1: error: parameter names (without types) in function declaration [-Werror]
sound/soc/codecs/es8316.c:623:26: error: 'es8316_i2c_driver' defined but not used [-Werror=unused-variable]
This adds the required Kconfig dependency.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The array ni_div does not need to be in global scope and is not
modified, so make it static const.
Cleans up sparse warning:
"symbol 'ni_div' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes this WARNING
sound/soc/sh/rcar/ssi.c:285:5-14: WARNING: Unsigned expression\
compared with zero: main_rate < 0
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It doesn't use asm header. We can add COMPILE_TEST
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Except ALC269.
This will reduce pop noise from headset or headphone.
If codec enter to power save state, when plug headset or headphone....
It has a chance to cut off power by system.
Our new codec use this procedure will be more stable during suspend
and resume state.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch will enable headset mode for ALC234/ALC274/ALC294 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA PCM core refers to the appl_ptr value stored on the mmapped
page that is shared between kernel and user-space. Although the
reference is performed in the PCM stream lock, it doesn't guarantee
the atomic access when the value gets updated concurrently from the
user-space on another CPU.
In most of codes, this is no big problem, but still there are a few
places that may result in slight inconsistencies because they access
runtime->control->appl_ptr multiple times; that is, the second read
might be a different value from the first value. It can be even
backward or jumping, as we have no control for it. Hence, the
calculation may give an unexpected value. Luckily, there is no
security vulnerability by that, as far as I've checked. But still we
should address it.
This patch tries to reduce such possible cases. The fix is simple --
we just read once, store it to a local variable and use it for the
rest calculations. The READ_ONCE() macro is used for it in order to
avoid the ill-effect by possible compiler optimizations.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark Brown