As the last step to making groups mandatory, clean up the remaining
drivers by adding basic support. Whilst it may not perfectly reflect
the isolation capabilities of the hardware (tegra_smmu_swgroup sounds
suspiciously like something that might warrant representing at the
iommu_group level), using generic_device_group() should at least
maintain existing behaviour with respect to the API.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As the last step to making groups mandatory, clean up the remaining
drivers by adding basic support. Whilst it may not perfectly reflect the
isolation capabilities of the hardware, using generic_device_group()
should at least maintain existing behaviour with respect to the API.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 09515ef5dd ("of/acpi: Configure dma operations at probe time for
platform/amba/pci bus devices") postponed the moment of attaching IOMMU
controller to its device, so there is no need to register IOMMU controllers
very early, before all other devices in the system. This change gives us an
opportunity to use standard platform device registration method also for
Exynos SYSMMU controllers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP IOMMU driver was using ARM assembly code directly for
flushing the MMU page table entries from the caches. This caused
MMU faults on OMAP4 (Cortex-A9 based SoCs) as L2 caches were not
handled due to the presence of a PL310 L2 Cache Controller. These
faults were however not seen on OMAP5/DRA7 SoCs (Cortex-A15 based
SoCs).
The OMAP IOMMU driver is adapted to use the DMA Streaming API
instead now to flush the page table/directory table entries from
the CPU caches. This ensures that the devices always see the
updated page table entries. The outer caches are now addressed
automatically with the usage of the DMA API.
Signed-off-by: Josue Albarran <j-albarran@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU framework lets its client users be notified on a
MMU fault and allows them to either handle the interrupt by
dynamic reloading of an appropriate TLB/PTE for the offending
fault address or to completely restart/recovery the device
and its IOMMU.
The OMAP remoteproc driver performs the latter option, and
does so after unwinding the previous mappings. The OMAP IOMMU
fault handler however disables the MMU and cuts off the clock
upon a MMU fault at present, resulting in an interconnect abort
during any subsequent operation that touches the MMU registers.
So, disable the IP-level fault interrupts instead of disabling
the MMU, to allow continued MMU register operations as well as
to avoid getting interrupted again.
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[s-anna@ti.com: add commit description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Josue Albarran <j-albarran@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we print the correct warning, an allmodconfig build is no longer
clean but always prints it, which defeats compile-testing:
drivers/iommu/exynos-iommu.c:58:2: error: #warning "revisit driver if we can enable big-endian ptes" [-Werror=cpp]
This replaces the #warning with a dependency, moving warning text into
a comment.
Fixes: 1f59adb176 ("iommu/exynos: Replace non-existing big-endian Kconfig option")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ISP mmu can't support reset operation, it won't get the
expected result when reset, but rest functions work normally.
Add this patch as a WA for this issue.
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
RK3368 vpu mmu have two irqs, this patch support multi irqs
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The register_syscore_ops() function takes a mutex and might
sleep. In the IOMMU initialization code it is invoked during
irq-remapping setup already, where irqs are disabled.
This causes a schedule-while-atomic bug:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: swapper/0
no locks held by swapper/0/1.
irq event stamp: 304
hardirqs last enabled at (303): [<ffffffff818a87b6>] _raw_spin_unlock_irqrestore+0x36/0x60
hardirqs last disabled at (304): [<ffffffff8235d440>] enable_IR_x2apic+0x79/0x196
softirqs last enabled at (36): [<ffffffff818ae75f>] __do_softirq+0x35f/0x4ec
softirqs last disabled at (31): [<ffffffff810c1955>] irq_exit+0x105/0x120
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc2.1.el7a.test.x86_64.debug #1
Hardware name: PowerEdge C6145 /040N24, BIOS 3.5.0 10/28/2014
Call Trace:
dump_stack+0x85/0xca
___might_sleep+0x22a/0x260
__might_sleep+0x4a/0x80
__mutex_lock+0x58/0x960
? iommu_completion_wait.part.17+0xb5/0x160
? register_syscore_ops+0x1d/0x70
? iommu_flush_all_caches+0x120/0x150
mutex_lock_nested+0x1b/0x20
register_syscore_ops+0x1d/0x70
state_next+0x119/0x910
iommu_go_to_state+0x29/0x30
amd_iommu_enable+0x13/0x23
Fix it by moving the register_syscore_ops() call to the next
initialization step, which runs with irqs enabled.
Reported-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2c0ae1720c ('iommu/amd: Convert iommu initialization to state machine')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Get rid of now unused device tracking code. Future code should instead
be able to use driver_for_each_device() for this purpose.
This is a simplified version of the following patch from Robin
[PATCH] iommu/ipmmu-vmsa: Clean up group allocation
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now when both 32-bit and 64-bit code inside the driver is using
fwspec it is possible to replace the utlb handling with fwspec ids
that get populated from ->of_xlate().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Consolidate the 32-bit and 64-bit code to make use of fwspec instead
of archdata for the 32-bit ARM case.
This is a simplified version of the fwspec handling code from Robin
posted as [PATCH] iommu/ipmmu-vmsa: Convert to iommu_fwspec
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 32-bit ARM code gets updated to make use of ->of_xlate() and the
code is shared between 64-bit and 32-bit ARM. The of_device_is_available()
check gets dropped since it is included in of_iommu_xlate().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extend the driver to make use of iommu_device_register()/unregister()
functions together with iommu_device_set_ops() and iommu_set_fwnode().
These used to be part of the earlier posted 64-bit ARM (r8a7795) series but
it turns out that these days they are required on 32-bit ARM as well.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Wrong Kconfig option was used when adding warning for untested
big-endian capabilities. There is no CONFIG_BIG_ENDIAN option.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When adding a large scatterlist entry that covers more than the L3
superpage size (1GB) but has an alignment such that we must use L2
superpages (2MB) , we give dma_pte_free_level() a range that causes it
to free the L3 pagetable we're about to populate. We fix this by telling
dma_pte_free_pagetable() about the pagetable level we're about to populate
to prevent freeing it.
For example, mapping a scatterlist with entry lengths 854MB and 1194MB
at IOVA 0xffff80000000 would, when processing the 2MB-aligned second
entry, cause pfn_to_dma_pte() to create a L3 directory to hold L2
superpages for the mapping at IOVA 0xffffc0000000. We would previously
call dma_pte_free_pagetable(domain, 0xffffc0000, 0xfffffffff), which
would free the L3 directory pfn_to_dma_pte() just created for IO PFN
0xffffc0000. Telling dma_pte_free_pagetable() to retain the L3
directories while using L2 superpages avoids the erroneous free.
Signed-off-by: David Dillow <dillow@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a PCI device has DMA quirks, we need to ensure that an upstream
IOMMU knows about all possible aliases, since the presence of a DMA
quirk does not preclude the device still also emitting transactions
(e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing
are relatively complex, and some bridges may only take ownership of
transactions under particular transient circumstances, leading again to
multiple RIDs potentially being seen at the IOMMU for the given device.
Take all this into account in the OF code by translating every RID
produced by the alias walk, not just whichever one comes out last.
Happily, this also makes things tidy enough that we can reduce the
number of both total lines of code, and confusing levels of indirection,
by pulling the "iommus"/"iommu-map" parsing helpers back in-line again.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IRTE[GALogIntr] bit should set when enabling guest_mode, which enables
IOMMU to generate entry in GALog when IRTE[IsRun] is not set, and send
an interrupt to notify IOMMU driver.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org # v4.9+
Fixes: d98de49a53 ('iommu/amd: Enable vAPIC interrupt remapping mode by default')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It may be an egregious error to attempt to use addresses outside the
range of the pagetable format, but that still doesn't mean we should
merrily wreak havoc by silently mapping/unmapping whatever truncated
portions of them might happen to correspond to real addresses.
Add some up-front checks to sanitise our inputs so that buggy callers
don't invite potential memory corruption.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
fwspec->iommu_priv is available only after arm_smmu_master_cfg
instance has been allocated. We shouldn't free it before that.
Also it's logical to free the master cfg itself without
checking for fwspec.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
[will: remove redundant assignment to fwspec]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The tlb_sync_pending flag was necessary for correctness in the Mediatek
M4U driver, but since it offered a small theoretical optimisation for
all io-pgtable users it was implemented as a high-level thing. However,
now that some users may not be using a synchronising lock, there are
several ways this flag can go wrong for them, and at worst it could
result in incorrect behaviour.
Since we've addressed the correctness issue within the Mediatek driver
itself, and fixing the optimisation aspect to be concurrency-safe would
be quite a headache (and impose extra overhead on every operation for
the sake of slightly helping one case which will virtually never happen
in typical usage), let's just retire it.
This reverts commit 88492a4700.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Under certain circumstances, the io-pgtable code may end up issuing two
TLB sync operations without any intervening invalidations. This goes
badly for the M4U hardware, since it means the second sync ends up
polling for a non-existent operation to finish, and as a result times
out and warns. The io_pgtable_tlb_* helpers implement a high-level
optimisation to avoid issuing the second sync at all in such cases, but
in order to work correctly that requires all pagetable operations to be
serialised under a lock, thus is no longer applicable to all io-pgtable
users.
Since we're the only user actually relying on this flag for correctness,
let's reimplement it locally to avoid the headache of trying to make the
high-level version concurrency-safe for other users.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 523d7423e2 ("iommu/arm-smmu: Remove io-pgtable spinlock")
removed the locking used to serialise map/unmap calls into the io-pgtable
code from the ARM SMMU driver. This is good for performance, but opens
us up to a nasty race with TLB syncs because the TLB sync register is
shared within a context bank (or even globally for stage-2 on SMMUv1).
There are two cases to consider:
1. A CPU can be spinning on the completion of a TLB sync, take an
interrupt which issues a subsequent TLB sync, and then report a
timeout on return from the interrupt.
2. A CPU can be spinning on the completion of a TLB sync, but other
CPUs can continuously issue additional TLB syncs in such a way that
the backoff logic reports a timeout.
Rather than fix this by spinning for completion of prior TLB syncs before
issuing a new one (which may suffer from fairness issues on large systems),
instead reintroduce locking around TLB sync operations in the ARM SMMU
driver.
Fixes: 523d7423e2 ("iommu/arm-smmu: Remove io-pgtable spinlock")
Cc: Robin Murphy <robin.murphy@arm.com>
Reported-by: Ray Jui <ray.jui@broadcom.com>
Tested-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The IOMMU is programmed with physical addresses for the various tables
and buffers that are used to communicate between the device and the
driver. When the driver allocates this memory it is encrypted. In order
for the IOMMU to access the memory as encrypted the encryption mask needs
to be included in these physical addresses during configuration.
The PTE entries created by the IOMMU should also include the encryption
mask so that when the device behind the IOMMU performs a DMA, the DMA
will be performed to encrypted memory.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: <iommu@lists.linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/3053631ea25ba8b1601c351cb7c541c496f6d9bc.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This update comes with:
* Support for lockless operation in the ARM io-pgtable code.
This is an important step to solve the scalability problems in
the common dma-iommu code for ARM
* Some Errata workarounds for ARM SMMU implemenations
* Rewrite of the deferred IO/TLB flush code in the AMD IOMMU
driver. The code suffered from very high flush rates, with the
new implementation the flush rate is down to ~1% of what it
was before
* Support for amd_iommu=off when booting with kexec. Problem
here was that the IOMMU driver bailed out early without
disabling the iommu hardware, if it was enabled in the old
kernel
* The Rockchip IOMMU driver is now available on ARM64
* Align the return value of the iommu_ops->device_group
call-backs to not miss error values
* Preempt-disable optimizations in the Intel VT-d and common
IOVA code to help Linux-RT
* Various other small cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=pmBf
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This update comes with:
- Support for lockless operation in the ARM io-pgtable code.
This is an important step to solve the scalability problems in the
common dma-iommu code for ARM
- Some Errata workarounds for ARM SMMU implemenations
- Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver.
The code suffered from very high flush rates, with the new
implementation the flush rate is down to ~1% of what it was before
- Support for amd_iommu=off when booting with kexec.
The problem here was that the IOMMU driver bailed out early without
disabling the iommu hardware, if it was enabled in the old kernel
- The Rockchip IOMMU driver is now available on ARM64
- Align the return value of the iommu_ops->device_group call-backs to
not miss error values
- Preempt-disable optimizations in the Intel VT-d and common IOVA
code to help Linux-RT
- Various other small cleanups and fixes"
* tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
iommu/vt-d: Constify intel_dma_ops
iommu: Warn once when device_group callback returns NULL
iommu/omap: Return ERR_PTR in device_group call-back
iommu: Return ERR_PTR() values from device_group call-backs
iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device()
iommu/vt-d: Don't disable preemption while accessing deferred_flush()
iommu/iova: Don't disable preempt around this_cpu_ptr()
iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126
iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701)
iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74
ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model
iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions
iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table
iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE
iommu/arm-smmu-v3: Remove io-pgtable spinlock
iommu/arm-smmu: Remove io-pgtable spinlock
iommu/io-pgtable-arm-v7s: Support lockless operation
iommu/io-pgtable-arm: Support lockless operation
iommu/io-pgtable: Introduce explicit coherency
iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
...
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls
to ->mapping_error so that the dma_map_ops instances are
more self contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)
-----BEGIN PGP SIGNATURE-----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=0Fso
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- Expand the generic infrastructure handling the irq migration on CPU
hotplug and convert X86 over to it. (Thomas Gleixner)
Aside of consolidating code this is a preparatory change for:
- Finalizing the affinity management for multi-queue devices. The
main change here is to shut down interrupts which are affine to a
outgoing CPU and reenabling them when the CPU comes online again.
That avoids moving interrupts pointlessly around and breaking and
reestablishing affinities for no value. (Christoph Hellwig)
Note: This contains also the BLOCK-MQ and NVME changes which depend
on the rework of the irq core infrastructure. Jens acked them and
agreed that they should go with the irq changes.
- Consolidation of irq domain code (Marc Zyngier)
- State tracking consolidation in the core code (Jeffy Chen)
- Add debug infrastructure for hierarchical irq domains (Thomas
Gleixner)
- Infrastructure enhancement for managing generic interrupt chips via
devmem (Bartosz Golaszewski)
- Constification work all over the place (Tobias Klauser)
- Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)
- The usual set of fixes, updates and enhancements all over the
place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
irqchip/or1k-pic: Fix interrupt acknowledgement
irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
nvme: Allocate queues for all possible CPUs
blk-mq: Create hctx for each present CPU
blk-mq: Include all present CPUs in the default queue mapping
genirq: Avoid unnecessary low level irq function calls
genirq: Set irq masked state when initializing irq_desc
genirq/timings: Add infrastructure for estimating the next interrupt arrival time
genirq/timings: Add infrastructure to track the interrupt timings
genirq/debugfs: Remove pointless NULL pointer check
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
irqchip/gic-v3-its: Add ACPI NUMA node mapping
irqchip/gic-v3-its-platform-msi: Make of_device_ids const
irqchip/gic-v3-its: Make of_device_ids const
irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
genirq/irqdomain: Remove auto-recursive hierarchy support
irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
And instead wire it up as method for all the dma_map_ops instances.
Note that this also means the arch specific check will be fully instead
of partially applied in the AMD iommu driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pass-through devices to VM guest can get updated IRQ affinity
information via irq_set_affinity() when not running in guest mode.
Currently, AMD IOMMU driver in GA mode ignores the updated information
if the pass-through device is setup to use vAPIC regardless of guest_mode.
This could cause invalid interrupt remapping.
Also, the guest_mode bit should be set and cleared only when
SVM updates posted-interrupt interrupt remapping information.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Fixes: d98de49a53 ('iommu/amd: Enable vAPIC interrupt remapping mode by default')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most dma_map_ops structures are never modified. Constify these
structures such that these can be write-protected.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This callback should never return NULL. Print a warning if
that happens so that we notice and can fix it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The generic device_group call-backs in iommu.c return NULL
in case of error. Since they are getting ERR_PTR values from
iommu_group_alloc(), just pass them up instead.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_group_get_for_dev() function also attaches the
device to its group, so this code doesn't need to be in the
iommu driver.
Further by using this function the driver can make use of
default domains in the future.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
get_cpu() disables preemption and returns the current CPU number. The
CPU number is only used once while retrieving the address of the local's
CPU deferred_flush pointer.
We can instead use raw_cpu_ptr() while we remain preemptible. The worst
thing that can happen is that flush_unmaps_timeout() is invoked multiple
times: once by taskA after seeing HIGH_WATER_MARK and then preempted to
another CPU and then by taskB which saw HIGH_WATER_MARK on the same CPU
as taskA. It is also likely that ->size got from HIGH_WATER_MARK to 0
right after its read because another CPU invoked flush_unmaps_timeout()
for this CPU.
The access to flush_data is protected by a spinlock so even if we get
migrated to another CPU or preempted - the data structure is protected.
While at it, I marked deferred_flush static since I can't find a
reference to it outside of this file.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 583248e662 ("iommu/iova: Disable preemption around use of
this_cpu_ptr()") disables preemption while accessing a per-CPU variable.
This does keep lockdep quiet. However I don't see the point why it is
bad if we get migrated after its access to another CPU.
__iova_rcache_insert() and __iova_rcache_get() immediately locks the
variable after obtaining it - before accessing its members.
_If_ we get migrated away after retrieving the address of cpu_rcache
before taking the lock then the *other* task on the same CPU will
retrieve the same address of cpu_rcache and will spin on the lock.
alloc_iova_fast() disables preemption while invoking
free_cpu_cached_iovas() on each CPU. The function itself uses
per_cpu_ptr() which does not trigger a warning (like this_cpu_ptr()
does). It _could_ make sense to use get_online_cpus() instead but the we
have a hotplug notifier for CPU down (and none for up) so we are good.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cavium ThunderX2 SMMU doesn't support MSI and also doesn't have unique irq
lines for gerror, eventq and cmdq-sync.
New named irq "combined" is set as a errata workaround, which allows to
share the irq line by register single irq handler for all the interrupts.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Geetha sowjanya <gakula@caviumnetworks.com>
[will: reworked irq equality checking and added SPI check]
Signed-off-by: Will Deacon <will.deacon@arm.com>
HiSilicon SMMUv3 on Hip06/Hip07 platforms doesn't support CMD_PREFETCH
command. The dt based support for this quirk is already present in the
driver(hisilicon,broken-prefetch-cmd). This adds ACPI support for the
quirk using the IORT smmu model number.
Signed-off-by: shameer <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: hanjun <guohanjun@huawei.com>
[will: rewrote patch]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cavium ThunderX2 SMMU implementation doesn't support page 1 register space
and PAGE0_REGS_ONLY option is enabled as an errata workaround.
This option when turned on, replaces all page 1 offsets used for
EVTQ_PROD/CONS, PRIQ_PROD/CONS register access with page 0 offsets.
SMMU resource size checks are now based on SMMU option PAGE0_REGS_ONLY,
since resource size can be either 64k/128k.
For this, arm_smmu_device_dt_probe/acpi_probe has been moved before
platform_get_resource call, so that SMMU options are set beforehand.
Signed-off-by: Linu Cherian <linu.cherian@cavium.com>
Signed-off-by: Geetha Sowjanya <geethasowjanya.akula@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The model number is already defined in acpica and we are actually
waiting for the acpi maintainers to include it:
https://github.com/acpica/acpica/commit/d00a4eb86e64
Adding those temporary definitions until the change makes it into
include/acpi/actbl2.h. Once that is done this patch can be reverted.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When writing a new table entry, we must ensure that the contents of the
table is made visible to the SMMU page table walker before the updated
table entry itself.
This is currently achieved using wmb(), which expands to an expensive and
unnecessary DSB instruction. Ideally, we'd just use cmpxchg64_release when
writing the table entry, but this doesn't have memory ordering semantics
on !SMP systems.
Instead, use dma_wmb(), which emits DMB OSHST. Strictly speaking, this
does more than we require (since it targets the outer-shareable domain),
but it's likely to be significantly faster than the DSB approach.
Reported-by: Linu Cherian <linu.cherian@cavium.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The LPAE/ARMv8 page table format relies on the ability to read and write
64-bit page table entries in an atomic fashion. With the move to a lockless
implementation, we also need support for cmpxchg64 to resolve races when
installing table entries concurrently.
Unfortunately, not all architectures support cmpxchg64, so the code can
fail to compiler when building for these architectures using COMPILE_TEST.
Rather than disable COMPILE_TEST altogether, instead check that
GENERIC_ATOMIC64 is not selected, which is a reasonable indication that
the architecture has support for 64-bit cmpxchg.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As for SMMUv2, take advantage of io-pgtable's newfound tolerance for
concurrency. Unfortunately in this case the command queue lock remains a
point of serialisation for the unmap path, but there may be a little
more we can do to ameliorate that in future.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the io-pgtable code now robust against (valid) races, we no longer
need to serialise all operations with a lock. This might make broken
callers who issue concurrent operations on overlapping addresses go even
more wrong than before, but hey, they already had little hope of useful
or deterministic results.
We do however still have to keep a lock around to serialise the ATS1*
translation ops, as parallel iova_to_phys() calls could lead to
unpredictable hardware behaviour otherwise.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Mirroring the LPAE implementation, rework the v7s code to be robust
against concurrent operations. The same two potential races exist, and
are solved in the same manner, with the fixed 2-level structure making
life ever so slightly simpler.
What complicates matters compared to LPAE, however, is large page
entries, since we can't update a block of 16 PTEs atomically, nor assume
available software bits to do clever things with. As most users are
never likely to do partial unmaps anyway (due to DMA API rules), it
doesn't seem unreasonable for this case to remain behind a serialising
lock; we just pull said lock down into the bowels of the implementation
so it's well out of the way of the normal call paths.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For parallel I/O with multiple concurrent threads servicing the same
device (or devices, if several share a domain), serialising page table
updates becomes a massive bottleneck. On reflection, though, we don't
strictly need to do that - for valid IOMMU API usage, there are in fact
only two races that we need to guard against: multiple map requests for
different blocks within the same region, when the intermediate-level
table for that region does not yet exist; and multiple unmaps of
different parts of the same block entry. Both of those are fairly easily
solved by using a cmpxchg to install the new table, such that if we then
find that someone else's table got there first, we can simply free ours
and continue.
Make the requisite changes such that we can withstand being called
without the caller maintaining a lock. In theory, this opens up a few
corners in which wildly misbehaving callers making nonsensical
overlapping requests might lead to crashes instead of just unpredictable
results, but correct code really does not deserve to pay a significant
performance cost for the sake of masking bugs in theoretical broken code.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Once we remove the serialising spinlock, a potential race opens up for
non-coherent IOMMUs whereby a caller of .map() can be sure that cache
maintenance has been performed on their new PTE, but will have no
guarantee that such maintenance for table entries above it has actually
completed (e.g. if another CPU took an interrupt immediately after
writing the table entry, but before initiating the DMA sync).
Handling this race safely will add some potentially non-trivial overhead
to installing a table entry, which we would much rather avoid on
coherent systems where it will be unnecessary, and where we are stirivng
to minimise latency by removing the locking in the first place.
To that end, let's introduce an explicit notion of cache-coherency to
io-pgtable, such that we will be able to avoid penalising IOMMUs which
know enough to know when they are coherent.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Whilst the short-descriptor format's split_blk_unmap implementation has
no need to be recursive, it followed the pattern of the LPAE version
anyway for the sake of consistency. With the latter now reworked for
both efficiency and future scalability improvements, tweak the former
similarly, not least to make it less obtuse.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The current split_blk_unmap implementation suffers from some inscrutable
pointer trickery for creating the tables to replace the block entry, but
more than that it also suffers from hideous inefficiency. For example,
the most pathological case of unmapping a level 3 page from a level 1
block will allocate 513 lower-level tables to remap the entire block at
page granularity, when only 2 are actually needed (the rest can be
covered by level 2 block entries).
Also, we would like to be able to relax the spinlock requirement in
future, for which the roll-back-and-try-again logic for race resolution
would be pretty hideous under the current paradigm.
Both issues can be resolved most neatly by turning things sideways:
instead of repeatedly recursing into __arm_lpae_map() map to build up an
entire new sub-table depth-first, we can directly replace the block
entry with a next-level table of block/page entries, then repeat by
unmapping at the next level if necessary. With a little refactoring of
some helper functions, the code ends up not much bigger than before, but
considerably easier to follow and to adapt in future.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Whilst we don't support the PXN bit at all, so should never encounter a
level 1 section or supersection PTE with it set, it would still be wise
to check both table type bits to resolve any theoretical ambiguity.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
iommu_device_register returns an error code and, although it currently
never fails, we should check its return value anyway.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[will: adjusted to follow arm-smmu.c]
Signed-off-by: Will Deacon <will.deacon@arm.com>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Revision C of IORT now allows us to identify ARM MMU-401 and the Cavium
ThunderX implementation. Wire them up so that we can probe these models
once firmware starts using the new codes in place of generic ones, and
so that the appropriate features and quirks get enabled when we do.
For the sake of backports and mitigating sychronisation problems with
the ACPICA headers, we'll carry a backup copy of the new definitions
locally for the short term to make life simpler.
CC: stable@vger.kernel.org # 4.10
Acked-by: Robert Richter <rrichter@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
File size before:
text data bss dec hex filename
6146 56 9 6211 1843 drivers/iommu/io-pgtable-arm-v7s.o
File size After adding 'const':
text data bss dec hex filename
6170 24 9 6203 183b drivers/iommu/io-pgtable-arm-v7s.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Waiting for a CMD_SYNC to be processed involves waiting for the command
queue to drain, which can take an awful lot longer than waiting for a
single entry to become available. Consequently, the common timeout value
of 100us has been observed to be too short on some platforms when a
CMD_SYNC is issued into a queued full of TLBI commands.
This patch resolves the issue by using a different (1s) timeout when
waiting for the CMDQ to drain and using a simple back-off mechanism
when polling the cons pointer in the absence of WFE support.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
[will: rewrote commit message and cosmetic changes]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add the missing name, so debugging will work proper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235443.431939968@linutronix.de
Add the missing name, so debugging will work proper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235443.343236995@linutronix.de
To benefit from IOTLB flushes on other CPUs we have to free
the already flushed IOVAs from the ring-buffer before we do
the queue_ring_full() check.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After we made sure that all IOMMUs have been disabled we
need to make sure that all resources we allocated are
released again.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function will also be used to free iommu resources when
amd_iommu=off was specified on the kernel command line. So
rename the function to reflect that.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When booting, make sure the IOMMUs are disabled. They could
be previously enabled if we boot into a kexec or kdump
kernel. So make sure they are off.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Conflicts:
kernel/sched/Makefile
Pick up the waitqueue related renames - it didn't get much feedback,
so it appears to be uncontroversial. Famous last words? ;-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
DMA_ERROR_CODE is not a public API and will go away soon. dma dma-iommu
driver already implements a proper ->mapping_error method, so it's only
using the value internally. Add a new local define using the value
that arm64 which is the only current user of dma-iommu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
When booting into a kdump kernel, suppress IO_PAGE_FAULTs by
default for all devices. But allow the faults again when a
domain is assigned to a device.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a timer to each dma_ops domain so that we flush unused
IOTLB entries regularily, even if the queues don't get full
all the time.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The counters are increased every time the TLB for a given
domain is flushed. We also store the current value of that
counter into newly added entries of the flush-queue, so that
we can tell whether this entry is already flushed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The queue flushing is pretty inefficient when it flushes the
queues for all cpus at once. Further it flushes all domains
from all IOMMUs for all CPUs, which is overkill as well.
Rip it out to make room for something more efficient.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently if there is no room to add a command to the command buffer, the
driver performs a "completion wait" which only returns when all commands
on the queue have been processed. There is no need to wait for the entire
command queue to be executed before adding the next command.
Update the driver to perform the same udelay() loop that the "completion
wait" performs, but instead re-read the head pointer to determine if
sufficient space is available. The very first time it is found that there
is no space available, the udelay() will be skipped to immediately perform
the opportunistic read of the head pointer. If it is still found that
there is not sufficient space, then the udelay() will be performed.
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As newer, higher speed devices are developed, perf data shows that the
amount of MMIO that is performed when submitting commands to the IOMMU
causes performance issues. Currently, the command submission path reads
the command buffer head and tail pointers and then writes the tail
pointer once the command is ready.
The tail pointer is only ever updated by the driver so it can be tracked
by the driver without having to read it from the hardware.
The head pointer is updated by the hardware, but can be read
opportunistically. Reading the head pointer only when it appears that
there might not be room in the command buffer and then re-checking the
available space reduces the number of times the head pointer has to be
read.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Misbehaving devices can cause an endless chain of
io-page-faults, flooding dmesg and making the system-log
unusable or even prevent the system from booting.
So ratelimit the error messages about io-page-faults on a
per-device basis.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We do find_domain() in __get_valid_domain_for_dev(), while we do the
same thing in get_valid_domain_for_dev(). No need to do it twice.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While deferring the probe of IOMMU masters, xlate and
add_device callbacks called from of_iommu_configure
can pass back error values like -ENODEV, which means
the IOMMU cannot be connected with that master for real
reasons. Before the IOMMU probe deferral, all such errors
were ignored. Now all those errors are propagated back,
killing the master's probe for such errors. Instead ignore
all the errors except EPROBE_DEFER, which is the only one
of concern and let the master work without IOMMU, thus
restoring the old behavior. Also make explicit that
of_dma_configure handles only -EPROBE_DEFER from
of_iommu_configure.
Fixes: 7b07cbefb6 ("iommu: of: Handle IOMMU lookup failure with deferred probing or error")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Magnus Damn <magnus.damn@gmail.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now with IOMMU probe deferral, we return -EPROBE_DEFER
for masters that are connected to an IOMMU which is not
probed yet, but going to get probed, so that we can attach
the correct dma_ops. So while trying to defer the probe of
the master, check if the of_iommu node that it is connected
to is marked in DT as 'status=disabled', then the IOMMU is never
is going to get probed. So simply return NULL and let the master
work without an IOMMU.
Fixes: 7b07cbefb6 ("iommu: of: Handle IOMMU lookup failure with deferred probing or error")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Magnus Damn <magnus.damn@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in of_iommu_driver_present() to handle the
extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20170516184735.788023442@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state checks in dmar_parse_one_atsr() and
dmar_iommu_notify_scope_dev() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20170516184735.712365947@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When walking the rbtree, the fact that iovad->start_pfn and limit_pfn
are both inclusive limits creates an ambiguity once limit_pfn reaches
the bottom of the address space and they overlap. Commit 5016bdb796
("iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range") fixed
the worst side-effect of this, that of underflow wraparound leading to
bogus allocations, but the remaining fallout is that any attempt to
allocate start_pfn itself erroneously fails.
The cleanest way to resolve the ambiguity is to simply make limit_pfn an
exclusive limit when inside the guts of the rbtree. Since we're working
with PFNs, representing one past the top of the address space is always
possible without fear of overflow, and elsewhere it just makes life a
little more straightforward.
Reported-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix comma-instead-of-semicolon typo error present
in the latest version of the IPMMU driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Neither the ARM page table code enabled by IOMMU_IO_PGTABLE_LPAE
nor the IPMMU_VMSA driver actually depends on ARM_LPAE, so get
rid of the dependency.
Tested with ipmmu-vmsa on r8a7794 ALT and a kernel config using:
# CONFIG_ARM_LPAE is not set
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert from archdata to iommu_priv via iommu_fwspec on ARM64 but
let 32-bit ARM keep on using archdata for now.
Once the 32-bit ARM code and the IPMMU driver is able to move over
to CONFIG_IOMMU_DMA=y then coverting to fwspec via ->of_xlate() will
be easy.
For now fwspec ids and num_ids are not used to allow code sharing between
32-bit and 64-bit ARM code inside the driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce an alternative set of iommu_ops suitable for 64-bit ARM
as well as 32-bit ARM when CONFIG_IOMMU_DMA=y. Also adjust the
Kconfig to depend on ARM or IOMMU_DMA. Initialize the device
from ->xlate() when CONFIG_IOMMU_DMA=y.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Break out the domain allocation code into a separate function.
This is preparation for future code sharing.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Break out the utlb parsing code and dev_data allocation into a
separate function. This is preparation for future code sharing.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce a bitmap for context handing and convert the
interrupt routine to handle all registered contexts.
At this point the number of contexts are still limited.
Also remove the use of the ARM specific mapping variable
from ipmmu_irq() to allow compile on ARM64.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IPMMU driver is using DT these days, and platform data is no longer
used by the driver. Remove unused code.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A driver would need to know if there are any active references to a
a PASID before cleaning up its resources. This function helps check
if there are any active users of a PASID before it can perform any
recovery on that device.
To: Joerg Roedel <joro@8bytes.org>
To: linux-kernel@vger.kernel.org
To: David Woodhouse <dwmw2@infradead.org>
Cc: Jean-Phillipe Brucker <jean-philippe.brucker@arm.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mediatek iommu driver relied on an implicit include of dma-mapping.h,
but for some reason that is no longer there in 4.12-rc1:
drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_domain_finalise':
drivers/iommu/mtk_iommu_v1.c:233:16: error: implicit declaration of function 'dma_zalloc_coherent'; did you mean 'debug_dma_alloc_coherent'? [-Werror=implicit-function-declaration]
drivers/iommu/mtk_iommu_v1.c: In function 'mtk_iommu_domain_free':
drivers/iommu/mtk_iommu_v1.c:265:2: error: implicit declaration of function 'dma_free_coherent'; did you mean 'debug_dma_free_coherent'? [-Werror=implicit-function-declaration]
This adds an explicit #include to make it build again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 208480bb27 ('iommu: Remove trace-events include from iommu.h')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Ever since commit 091d42e43d ("iommu/vt-d: Copy translation tables from
old kernel") the kdump kernel copies the IOMMU context tables from the
previous kernel. Each device mappings will be destroyed once the driver
for the respective device takes over.
This unfortunately breaks the workflow of mapping and unmapping a new
context to the IOMMU. The mapping function assumes that either:
1) Unmapping did the proper IOMMU flushing and it only ever flush if the
IOMMU unit supports caching invalid entries.
2) The system just booted and the initialization code took care of
flushing all IOMMU caches.
This assumption is not true for the kdump kernel since the context
tables have been copied from the previous kernel and translations could
have been cached ever since. So make sure to flush the IOTLB as well
when we destroy these old copied mappings.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org v4.2+
Fixes: 091d42e43d ("iommu/vt-d: Copy translation tables from old kernel")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When __iommu_dma_map() and iommu_dma_free_iova() are called from
iommu_dma_get_msi_page(), various iova_*() helpers are still invoked in
the process, whcih is unwise since they access a different member of the
union (the iova_domain) from that which was last written, and there's no
guarantee that sensible values will result anyway.
CLean up the code paths that are valid for an MSI cookie to ensure we
only do iova_domain-specific things when we're actually dealing with one.
Fixes: a44e665758 ("iommu/dma: Clean up MSI IOVA allocation")
Reported-by: Nate Watterson <nwatters@codeaurora.org>
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch makes it possible to compile the rockchip-iommu driver on
ARM64, so that it can be used with 64-bit SoCs equipped with this type
of IOMMU.
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This includes:
* Some code optimizations for the Intel VT-d driver
* Code to switch off a previously enabled Intel IOMMU
* Support for 'struct iommu_device' for OMAP, Rockchip and
Mediatek IOMMUs
* Some header optimizations for IOMMU core code headers and a
few fixes that became necessary in other parts of the kernel
because of that
* ACPI/IORT updates and fixes
* Some Exynos IOMMU optimizations
* Code updates for the IOMMU dma-api code to bring it closer to
use per-cpu iova caches
* New command-line option to set default domain type allocated
by the iommu core code
* Another command line option to allow the Intel IOMMU switched
off in a tboot environment
* ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using
an IDENTITY domain in conjunction with DMA ops, Support for
SMR masking, Support for 16-bit ASIDs (was previously broken)
* Various other small fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJZEY4XAAoJECvwRC2XARrjth0QAKV56zjnFclv39aDo6eCq9CT
51+XT4bPY5VKQ2+Jx76TBNObHmGK+8KEMHfT9khpWJtFCDyy25SGckLry1nYqmZs
tSTsbj4sOeCyKzOLITlRN9/OzKXkjKAxYuq+sQZZFDFYf3kCM/eag0dGAU6aVLNp
tkIal3CSpGjCQ9M5JohrtQ1mwiGqCIkMIgvnBjRw+bfpLnQNG+VL6VU2G3RAkV2b
5Vbdoy+P7ZQnJSZr/bibYL2BaQs2diR4gOppT5YbsfniMq4QYSjheu1xBboGX8b7
sx8yuPi4370irSan0BDvlvdQdjBKIRiDjfGEKDhRwPhtvN6JREGakhEOC8MySQ37
mP96B72Lmd+a7DEl5udOL7tQILA0DcUCX0aOyF714khnZuFU5tVlCotb/36xeJ+T
FPc3RbEVQ90m8dYU6MNJ+ahtb/ZapxGTRfisIigB6wlnZa0Evabp9EJSce6oJMkm
whbBhDubeEU18n9XAaofMbu+P2LAzq8cxiRMlsDvT4mIy7jO86jjCmhpu1Tfn2GY
4wrEQZdWOMvhUsIhObXA0aC3BzC506uvnKPW3qy041RaxBuelWiBi29qzYbhxzkr
DLDpWbUZNYPyFJjttpavyQb2/XRduBTJdVP1pQpkJNDsW5jLiBkpSqm9xNADapRY
vLSYRX0JCIquaD+PAuxn
=3aE8
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- code optimizations for the Intel VT-d driver
- ability to switch off a previously enabled Intel IOMMU
- support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
IOMMUs
- header optimizations for IOMMU core code headers and a few fixes that
became necessary in other parts of the kernel because of that
- ACPI/IORT updates and fixes
- Exynos IOMMU optimizations
- updates for the IOMMU dma-api code to bring it closer to use per-cpu
iova caches
- new command-line option to set default domain type allocated by the
iommu core code
- another command line option to allow the Intel IOMMU switched off in
a tboot environment
- ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
Support for 16-bit ASIDs (was previously broken)
- various other small fixes and improvements
* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
soc/qbman: Move dma-mapping.h include to qman_priv.h
soc/qbman: Fix implicit header dependency now causing build fails
iommu: Remove trace-events include from iommu.h
iommu: Remove pci.h include from trace/events/iommu.h
arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
ACPI/IORT: Fix CONFIG_IOMMU_API dependency
iommu/vt-d: Don't print the failure message when booting non-kdump kernel
iommu: Move report_iommu_fault() to iommu.c
iommu: Include device.h in iommu.h
x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
iommu/arm-smmu: Correct sid to mask
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
omap3isp: Remove iommu_group related code
iommu/omap: Add iommu-group support
iommu/omap: Make use of 'struct iommu_device'
iommu/omap: Store iommu_dev pointer in arch_data
iommu/omap: Move data structures to omap-iommu.h
iommu/omap: Drop legacy-style device support
...
-----BEGIN PGP SIGNATURE-----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=DQ0P
-----END PGP SIGNATURE-----
Merge tag 'drm-forgot-about-tegra-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm tegra updates from Dave Airlie:
"I missed a pull request from Thierry, this stuff has been in
linux-next for a while anyways.
It does contain a branch from the iommu tree, but Thierry said it
should be fine"
* tag 'drm-forgot-about-tegra-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux:
gpu: host1x: Fix host1x driver shutdown
gpu: host1x: Support module reset
gpu: host1x: Sort includes alphabetically
drm/tegra: Add VIC support
dt-bindings: Add bindings for the Tegra VIC
drm/tegra: Add falcon helper library
drm/tegra: Add Tegra DRM allocation API
drm/tegra: Add tiling FB modifiers
drm/tegra: Don't leak kernel pointer to userspace
drm/tegra: Protect IOMMU operations by mutex
drm/tegra: Enable IOVA API when IOMMU support is enabled
gpu: host1x: Add IOMMU support
gpu: host1x: Fix potential out-of-bounds access
iommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m
iommu: Add dummy implementations for !IOMMU_IOVA
MAINTAINERS: Add related headers to IOMMU section
iommu/iova: Consolidate code for adding new node to iovad domain rbtree
This contains various fixes to the host1x driver as well as a plug for a
leak of kernel pointers to userspace.
A fairly big addition this time around is the Video Image Composer (VIC)
support that can be used to accelerate some 2D and image compositing
operations.
Furthermore the driver now supports FB modifiers, so we no longer rely
on a custom IOCTL to set those.
Finally this contains a few preparatory patches for Tegra186 support
which unfortunately didn't quite make it this time, but will hopefully
be ready for v4.13.
-----BEGIN PGP SIGNATURE-----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=Eqtp
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.12-rc1
This contains various fixes to the host1x driver as well as a plug for a
leak of kernel pointers to userspace.
A fairly big addition this time around is the Video Image Composer (VIC)
support that can be used to accelerate some 2D and image compositing
operations.
Furthermore the driver now supports FB modifiers, so we no longer rely
on a custom IOCTL to set those.
Finally this contains a few preparatory patches for Tegra186 support
which unfortunately didn't quite make it this time, but will hopefully
be ready for v4.13.
* tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: Fix host1x driver shutdown
gpu: host1x: Support module reset
gpu: host1x: Sort includes alphabetically
drm/tegra: Add VIC support
dt-bindings: Add bindings for the Tegra VIC
drm/tegra: Add falcon helper library
drm/tegra: Add Tegra DRM allocation API
drm/tegra: Add tiling FB modifiers
drm/tegra: Don't leak kernel pointer to userspace
drm/tegra: Protect IOMMU operations by mutex
drm/tegra: Enable IOVA API when IOMMU support is enabled
gpu: host1x: Add IOMMU support
gpu: host1x: Fix potential out-of-bounds access
iommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m
iommu: Add dummy implementations for !IOMMU_IOVA
MAINTAINERS: Add related headers to IOMMU section
iommu/iova: Consolidate code for adding new node to iovad domain rbtree
Pull s390 updates from Martin Schwidefsky:
- three merges for KVM/s390 with changes for vfio-ccw and cpacf. The
patches are included in the KVM tree as well, let git sort it out.
- add the new 'trng' random number generator
- provide the secure key verification API for the pkey interface
- introduce the z13 cpu counters to perf
- add a new system call to set up the guarded storage facility
- simplify TASK_SIZE and arch_get_unmapped_area
- export the raw STSI data related to CPU topology to user space
- ... and the usual churn of bug-fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/crypt: use the correct module alias for paes_s390.
s390/cpacf: Introduce kma instruction
s390/cpacf: query instructions use unique parameters for compatibility with KMA
s390/trng: Introduce s390 TRNG device driver.
s390/crypto: Provide s390 specific arch random functionality.
s390/crypto: Add new subfunctions to the cpacf PRNO function.
s390/crypto: Renaming PPNO to PRNO.
s390/pageattr: avoid unnecessary page table splitting
s390/mm: simplify arch_get_unmapped_area[_topdown]
s390/mm: make TASK_SIZE independent from the number of page table levels
s390/gs: add regset for the guarded storage broadcast control block
s390/kvm: Add use_cmma field to mm_context_t
s390/kvm: Add PGSTE manipulation functions
vfio: ccw: improve error handling for vfio_ccw_mdev_remove
vfio: ccw: remove unnecessary NULL checks of a pointer
s390/spinlock: remove compare and delay instruction
s390/spinlock: use atomic primitives for spinlocks
s390/cpumf: simplify detection of guest samples
s390/pci: remove forward declaration
s390/pci: increase the PCI_NR_FUNCTIONS default
...
The include file does not need any PCI specifics, so remove
that include. Also fix the places that relied on it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When booting a new non-kdump kernel, we have below failure message:
[ 0.004000] DMAR-IR: IRQ remapping was enabled on dmar2 but we are not in kdump mode
[ 0.004000] DMAR-IR: Failed to copy IR table for dmar2 from previous kernel
[ 0.004000] DMAR-IR: IRQ remapping was enabled on dmar1 but we are not in kdump mode
[ 0.004000] DMAR-IR: Failed to copy IR table for dmar1 from previous kernel
[ 0.004000] DMAR-IR: IRQ remapping was enabled on dmar0 but we are not in kdump mode
[ 0.004000] DMAR-IR: Failed to copy IR table for dmar0 from previous kernel
[ 0.004000] DMAR-IR: IRQ remapping was enabled on dmar3 but we are not in kdump mode
[ 0.004000] DMAR-IR: Failed to copy IR table for dmar3 from previous kernel
For non-kdump case, we no need to copy IR table from previous kernel
so it's nonthing actually failed. To be less alarming or misleading,
do not print "DMAR-IR: Failed to copy IR table for dmar[0-9] from
previous kernel" messages when booting non-kdump kernel.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is in no fast-path, there is no need for it to
be static inline in a header file. This also removes the
need to include iommu trace-points in iommu.h.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU harms performance signficantly when we run very fast networking
workloads. It's 40GB networking doing XDP test. Software overhead is
almost unaware, but it's the IOTLB miss (based on our analysis) which
kills the performance. We observed the same performance issue even with
software passthrough (identity mapping), only the hardware passthrough
survives. The pps with iommu (with software passthrough) is only about
~30% of that without it. This is a limitation in hardware based on our
observation, so we'd like to disable the IOMMU force on, but we do want
to use TBOOT and we can sacrifice the DMA security bought by IOMMU. I
must admit I know nothing about TBOOT, but TBOOT guys (cc-ed) think not
eabling IOMMU is totally ok.
So introduce a new boot option to disable the force on. It's kind of
silly we need to run into intel_iommu_init even without force on, but we
need to disable TBOOT PMR registers. For system without the boot option,
nothing is changed.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For software initiated address translation, when domain type is
IOMMU_DOMAIN_IDENTITY i.e SMMU is bypassed, mimic HW behavior
i.e return the same IOVA as translated address.
This patch is an extension to Will Deacon's patchset
"Implement SMMU passthrough using the default domain".
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
From code "SMR mask 0x%x out of range for SMMU", so, we need to use mask, not
sid.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In function amd_iommu_bind_pasid(), the control flow jumps
to label out_free when pasid_state->mm and mm is NULL. And
mmput(mm) is called. In function mmput(mm), mm is
referenced without validation. This will result in a NULL
dereference bug. This patch fixes the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes: f0aac63b87 ('iommu/amd: Don't hold a reference to mm_struct')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In iommu_bus_notifier(), when action is
BUS_NOTIFY_ADD_DEVICE, it will return 'ops->add_device(dev)'
directly. But ops->add_device will return ERR_VAL, such as
-ENODEV. These value will make notifier_call_chain() not to
traverse the remain nodes in struct notifier_block list.
This patch revises iommu_bus_notifier() to return
NOTIFY_DONE when some errors happened in ops->add_device().
Signed-off-by: zhichang.yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support for IOMMU groups will become mandatory for drivers,
so add it to the omap iommu driver.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: minor error cleanups]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Modify the driver to register individual iommus and
establish links between devices and iommus in sysfs.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: fix some cleanup issues during failures]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of finding the matching IOMMU for a device using
string comparision functions, store the pointer to the
iommu_dev in arch_data during the omap_iommu_add_device
callback and reset it during the omap_iommu_remove_device
callback functions.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: few minor cleanups]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The internal data-structures are scattered over various
header and C files. Consolidate them in omap-iommu.h.
While at this, add the kerneldoc comment for the missing
iommu domain variable and revise the iommu_arch_data name.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[s-anna@ti.com: revise kerneldoc comments]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All the supported boards that have OMAP IOMMU devices do support
DT boot only now. So, drop the support for the non-DT legacy-style
devices from the OMAP IOMMU driver. Couple of the fields from the
iommu platform data would no longer be required, so they have also
been cleaned up. The IOMMU platform data is still needed though for
performing reset management properly in a multi-arch environment.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the registration of the OMAP IOMMU platform driver before
setting the IOMMU callbacks on the platform bus. This causes
the IOMMU devices to be probed first before the .add_device()
callback is invoked for all registered devices, and allows
the iommu_group support to be added to the OMAP IOMMU driver.
While at this, also check for the return status from bus_set_iommu.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the appropriate ordering is enforced via probe-deferral of
masters in core code, rip it all out and bask in the simplicity.
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[Sricharan: Rebased on top of ACPI IORT SMMU series]
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Failures to look up an IOMMU when parsing the DT iommus property need to
be handled separately from the .of_xlate() failures to support deferred
probing.
The lack of a registered IOMMU can be caused by the lack of a driver for
the IOMMU, the IOMMU device probe not having been performed yet, having
been deferred, or having failed.
The first case occurs when the device tree describes the bus master and
IOMMU topology correctly but no device driver exists for the IOMMU yet
or the device driver has not been compiled in. Return NULL, the caller
will configure the device without an IOMMU.
The second and third cases are handled by deferring the probe of the bus
master device which will eventually get reprobed after the IOMMU.
The last case is currently handled by deferring the probe of the bus
master device as well. A mechanism to either configure the bus master
device without an IOMMU or to fail the bus master device probe depending
on whether the IOMMU is optional or mandatory would be a good
enhancement.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pichart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU configuration represents unchanging properties of the hardware,
and as such should only need happen once in a device's lifetime, but
the necessary interaction with the IOMMU device and driver complicates
exactly when that point should be.
Since the only reasonable tool available for handling the inter-device
dependency is probe deferral, we need to prepare of_iommu_configure()
to run later than it is currently called (i.e. at driver probe rather
than device creation), to handle being retried, and to tell whether a
not-yet present IOMMU should be waited for or skipped (by virtue of
having declared a built-in driver or not).
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation for some upcoming cleverness, rework the control flow in
of_iommu_configure() to minimise duplication and improve the propogation
of errors. It's also as good a time as any to switch over from the
now-just-a-compatibility-wrapper of_iommu_get_ops() to using the generic
IOMMU instance interface directly.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Normally, calling alloc_iova() using an iova_domain with insufficient
pfns remaining between start_pfn and dma_limit will fail and return a
NULL pointer. Unexpectedly, if such a "full" iova_domain contains an
iova with pfn_lo == 0, the alloc_iova() call will instead succeed and
return an iova containing invalid pfns.
This is caused by an underflow bug in __alloc_and_insert_iova_range()
that occurs after walking the "full" iova tree when the search ends
at the iova with pfn_lo == 0 and limit_pfn is then adjusted to be just
below that (-1). This (now huge) limit_pfn gives the impression that a
vast amount of space is available between it and start_pfn and thus
a new iova is allocated with the invalid pfn_hi value, 0xFFF.... .
To rememdy this, a check is introduced to ensure that adjustments to
limit_pfn will not underflow.
This issue has been observed in the wild, and is easily reproduced with
the following sample code.
struct iova_domain *iovad = kzalloc(sizeof(*iovad), GFP_KERNEL);
struct iova *rsvd_iova, *good_iova, *bad_iova;
unsigned long limit_pfn = 3;
unsigned long start_pfn = 1;
unsigned long va_size = 2;
init_iova_domain(iovad, SZ_4K, start_pfn, limit_pfn);
rsvd_iova = reserve_iova(iovad, 0, 0);
good_iova = alloc_iova(iovad, va_size, limit_pfn, true);
bad_iova = alloc_iova(iovad, va_size, limit_pfn, true);
Prior to the patch, this yielded:
*rsvd_iova == {0, 0} /* Expected */
*good_iova == {2, 3} /* Expected */
*bad_iova == {-2, -1} /* Oh no... */
After the patch, bad_iova is NULL as expected since inadequate
space remains between limit_pfn and start_pfn after allocating
good_iova.
Signed-off-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The recursive nature of __arm_lpae_{map,unmap}() means that
ARM_LPAE_BLOCK_SIZE() is evaluated for every level, including those
where block mappings aren't possible. This in itself is harmless enough,
as we will only ever be called with valid sizes from the pgsize_bitmap,
and thus always recurse down past any imaginary block sizes. The only
problem is that most of those imaginary sizes overflow the type used for
the calculation, and thus trigger warnings under UBsan:
[ 63.020939] ================================================================================
[ 63.021284] UBSAN: Undefined behaviour in drivers/iommu/io-pgtable-arm.c:312:22
[ 63.021602] shift exponent 39 is too large for 32-bit type 'int'
[ 63.021909] CPU: 0 PID: 1119 Comm: lkvm Not tainted 4.7.0-rc3+ #819
[ 63.022163] Hardware name: FVP Base (DT)
[ 63.022345] Call trace:
[ 63.022629] [<ffffff900808f258>] dump_backtrace+0x0/0x3a8
[ 63.022975] [<ffffff900808f614>] show_stack+0x14/0x20
[ 63.023294] [<ffffff90086bc9dc>] dump_stack+0x104/0x148
[ 63.023609] [<ffffff9008713ce8>] ubsan_epilogue+0x18/0x68
[ 63.023956] [<ffffff9008714410>] __ubsan_handle_shift_out_of_bounds+0x18c/0x1bc
[ 63.024365] [<ffffff900890fcb0>] __arm_lpae_map+0x720/0xae0
[ 63.024732] [<ffffff9008910170>] arm_lpae_map+0x100/0x190
[ 63.025049] [<ffffff90089183d8>] arm_smmu_map+0x78/0xc8
[ 63.025390] [<ffffff9008906c18>] iommu_map+0x130/0x230
[ 63.025763] [<ffffff9008bf7564>] vfio_iommu_type1_attach_group+0x4bc/0xa00
[ 63.026156] [<ffffff9008bf3c78>] vfio_fops_unl_ioctl+0x320/0x580
[ 63.026515] [<ffffff9008377420>] do_vfs_ioctl+0x140/0xd28
[ 63.026858] [<ffffff9008378094>] SyS_ioctl+0x8c/0xa0
[ 63.027179] [<ffffff9008086e70>] el0_svc_naked+0x24/0x28
[ 63.027412] ================================================================================
Perform the shift in a 64-bit type to prevent the theoretical overflow
and keep the peace. As it turns out, this generates identical code for
32-bit ARM, and marginally shorter AArch64 code, so it's good all round.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The IOMMU core currently initialises the default domain for each group
to IOMMU_DOMAIN_DMA, under the assumption that devices will use
IOMMU-backed DMA ops by default. However, in some cases it is desirable
for the DMA ops to bypass the IOMMU for performance reasons, reserving
use of translation for subsystems such as VFIO that require it for
enforcing device isolation.
Rather than modify each IOMMU driver to provide different semantics for
DMA domains, instead we introduce a command line parameter that can be
used to change the type of the default domain. Passthrough can then be
specified using "iommu.passthrough=1" on the kernel command line.
Signed-off-by: Will Deacon <will.deacon@arm.com>
In preparation for allowing the default domain type to be overridden,
this patch adds support for IOMMU_DOMAIN_IDENTITY domains to the
ARM SMMUv3 driver.
An identity domain is created by placing the corresponding stream table
entries into "bypass" mode, which allows transactions to flow through
the SMMU without any translation.
Signed-off-by: Will Deacon <will.deacon@arm.com>
arm_smmu_install_ste_for_dev cannot fail and always returns 0, however
the fact that it returns int means that callers end up implementing
redundant error handling code which complicates STE tracking and is
never executed.
This patch changes the return type of arm_smmu_install_ste_for_dev
to void, to make it explicit that it cannot fail.
Signed-off-by: Will Deacon <will.deacon@arm.com>
In preparation for allowing the default domain type to be overridden,
this patch adds support for IOMMU_DOMAIN_IDENTITY domains to the
ARM SMMU driver.
An identity domain is created by placing the corresponding S2CR
registers into "bypass" mode, which allows transactions to flow through
the SMMU without any translation.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU drivers provide a DOMAIN_ATTR_NESTING domain attribute,
which allows callers of the IOMMU API to request that the page table
for a domain is installed at stage-2, if supported by the hardware.
Since setting this attribute only makes sense for UNMANAGED domains,
this patch returns -ENODEV if the domain_{get,set}_attr operations are
called on other domain types.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The current SMR masking support using a 2-cell iommu-specifier is
primarily intended to handle individual masters with large and/or
complex Stream ID assignments; it quickly gets a bit clunky in other SMR
use-cases where we just want to consistently mask out the same part of
every Stream ID (e.g. for MMU-500 configurations where the appended TBU
number gets in the way unnecessarily). Let's add a new property to allow
a single global mask value to better fit the latter situation.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
On relatively slow development platforms and software models, the
inefficiency of our TLB sync loop tends not to show up - for instance on
a Juno r1 board I typically see the TLBI has completed of its own accord
by the time we get to the sync, such that the latter finishes instantly.
However, on larger systems doing real I/O, it's less realistic for the
TLBs to go idle immediately, and at that point falling into the 1MHz
polling loop turns out to throw away performance drastically. Let's
strike a balance by polling more than once between pauses, such that we
have much more chance of catching normal operations completing before
committing to the fixed delay, but also backing off exponentially, since
if a sync really hasn't completed within one or two "reasonable time"
periods, it becomes increasingly unlikely that it ever will.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
TLB synchronisation typically involves the SMMU blocking all incoming
transactions until the TLBs report completion of all outstanding
operations. In the common SMMUv2 configuration of a single distributed
SMMU serving multiple peripherals, that means that a single unmap
request has the potential to bring the hammer down on the entire system
if synchronised globally. Since stage 1 contexts, and stage 2 contexts
under SMMUv2, offer local sync operations, let's make use of those
wherever we can in the hope of minimising global disruption.
To that end, rather than add any more branches to the already unwieldy
monolithic TLB maintenance ops, break them up into smaller, neater,
functions which we can then mix and match as appropriate.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARM_AMMU_CB() is calculated relative to ARM_SMMU_CB_BASE(), but the
latter is never of use on its own, and what we end up with is the same
ARM_SMMU_CB_BASE() + ARM_AMMU_CB() expression being duplicated at every
callsite. Folding the two together gives us a self-contained context
bank accessor which is much more pleasant to work with.
Secondly, we might as well simplify CB_BASE itself at the same time.
We use the address space size for its own sake precisely once, at probe
time, and every other usage is to dynamically calculate CB_BASE over
and over and over again. Let's flip things around so that we just
maintain the CB_BASE address directly.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Calculating ASIDs/VMIDs dynamically from arm_smmu_cfg was a neat trick,
but the global uniqueness workaround makes it somewhat more awkward, and
means we end up having to pass extra state around in certain cases just
to keep a handle on the offset.
We already have 16 bits going spare in arm_smmu_cfg; let's just
precalculate an ASID/VMID, plop it in there, and tidy up the users
accordingly. We'd also need something like this anyway if we ever get
near to thinking about SVM, so it's no bad thing.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
16-bit ASID should be enabled before initializing TTBR0/1,
otherwise only LSB 8-bit ASID will be considered. Hence
moving configuration of TTBCR register ahead of TTBR0/1
while initializing context bank.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
[will: rewrote comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Firmware is responsible for properly enabling smmu workarounds. Print
a message for better diagnostics when Cavium erratum 27704 was
detected.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Register hardware IOMMUs seperatly with the iommu-core code
and add a sysfs representation of the iommu topology.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With IOVA allocation suitably tidied up, we are finally free to opt in
to the per-CPU caching mechanism. The caching alone can provide a modest
improvement over walking the rbtree for weedier systems (iperf3 shows
~10% more ethernet throughput on an ARM Juno r1 constrained to a single
650MHz Cortex-A53), but the real gain will be in sidestepping the rbtree
lock contention which larger ARM-based systems with lots of parallel I/O
are starting to feel the pain of.
Reviewed-by: Nate Watterson <nwatters@codeaurora.org>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that allocation is suitably abstracted, our private alloc/free
helpers can drive the trivial MSI cookie allocator directly as well,
which lets us clean up its exposed guts from iommu_dma_map_msi_msg() and
simplify things quite a bit.
Reviewed-by: Nate Watterson <nwatters@codeaurora.org>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation for some IOVA allocation improvements, clean up all the
explicit struct iova usage such that all our mapping, unmapping and
cleanup paths deal exclusively with addresses rather than implementation
details. In the process, a few of the things we're touching get renamed
for the sake of internal consistency.
Reviewed-by: Nate Watterson <nwatters@codeaurora.org>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To make vfio support subchannel devices, we need a css driver for
the vfio subchannels. This patch adds a basic vfio-ccw subchannel
driver for this purpose.
To enable VFIO for vfio-ccw, enable S390_CCW_IOMMU config option
and configure VFIO as required.
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-5-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently, amd_iommu_pc_get_max_[banks|counters]() use end-point device
ID to locate an IOMMU and check the reported max banks/counters. The
logic assumes that the IOMMU_BASE_DEVID belongs to the first IOMMU, and
uses it to acquire a reference to the first IOMMU, which does not work
on certain systems. Instead, modify the function to take an IOMMU index,
and use it to query the corresponding AMD IOMMU instance.
Currently, hardcode the IOMMU index to 0 since the current AMD IOMMU
perf implementation supports only a single IOMMU. A subsequent patch
will add support for multiple IOMMUs, and will use a proper IOMMU index.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-7-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce amd_iommu_get_num_iommus(), which returns the value of
amd_iommus_present. The function is used to replace direct access to the
variable, which is now declared as static.
This function will also be used by AMD IOMMU perf driver.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jörg Rödel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1487926102-13073-6-git-send-email-Suravee.Suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When booting into a kexec kernel with intel_iommu=off, and
the previous kernel had intel_iommu=on, the IOMMU hardware
is still enabled and gets not disabled by the new kernel.
This causes the boot to fail because DMA is blocked by the
hardware. Disable the IOMMUs when we find it enabled in the
kexec kernel and boot with intel_iommu=off.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
SYSMMU v5 has dedicated registers to perform TLB flush range operation,
so use them instead of looping with FLUSH_ENTRY command.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU domain allocation is not performance critical operation, so remove
hand made optimisation of unrolled initialization loop and leave this to
the compiler.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we're applying the IOMMU API reserved regions to our IOVA
domains, we shouldn't need to privately special-case PCI windows, or
indeed anything else which isn't specific to our iommu-dma layer.
However, since those aren't IOMMU-specific either, rather than start
duplicating code into IOMMU drivers let's transform the existing
function into an iommu_get_resv_regions() helper that they can share.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that it's simple to discover the necessary reservations for a given
device/IOMMU combination, let's wire up the appropriate handling. Basic
reserved regions and direct-mapped regions we simply have to carve out
of IOVA space (the IOMMU core having already mapped the latter before
attaching the device). For hardware MSI regions, we also pre-populate
the cookie with matching msi_pages. That way, irqchip drivers which
normally assume MSIs to require mapping at the IOMMU can keep working
without having to special-case their iommu_dma_map_msi_msg() hook, or
indeed be aware at all of quirks preventing the IOMMU from translating
certain addresses.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Even if a host controller's CPU-side MMIO windows into PCI I/O space do
happen to leak into PCI memory space such that it might treat them as
peer addresses, trying to reserve the corresponding I/O space addresses
doesn't do anything to help solve that problem. Stop doing a silly thing.
Fixes: fade1ec055 ("iommu/dma: Avoid PCI host bridge windows")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The introduction of reserved regions has left a couple of rough edges
which we could do with sorting out sooner rather than later. Since we
are not yet addressing the potential dynamic aspect of software-managed
reservations and presenting them at arbitrary fixed addresses, it is
incongruous that we end up displaying hardware vs. software-managed MSI
regions to userspace differently, especially since ARM-based systems may
actually require one or the other, or even potentially both at once,
(which iommu-dma currently has no hope of dealing with at all). Let's
resolve the former user-visible inconsistency ASAP before the ABI has
been baked into a kernel release, in a way that also lays the groundwork
for the latter shortcoming to be addressed by follow-up patches.
For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use
IOMMU_RESV_MSI to describe the hardware type, and document everything a
little bit. Since the x86 MSI remapping hardware falls squarely under
this meaning of IOMMU_RESV_MSI, apply that type to their regions as well,
so that we tell the same story to userspace across all platforms.
Secondly, as the various region types require quite different handling,
and it really makes little sense to ever try combining them, convert the
bitfield-esque #defines to a plain enum in the process before anyone
gets the wrong impression.
Fixes: d30ddcaa7b ("iommu: Add a new type field in iommu_resv_region")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: kvm@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For some unknown reasons, in some cases, FLPD cache invalidation doesn't
work properly with SYSMMU v5 controllers found in Exynos5433 SoCs. This
can be observed by a firmware crash during initialization phase of MFC
video decoder available in the mentioned SoCs when IOMMU support is
enabled. To workaround this issue perform a full TLB/FLPD invalidation
in case of replacing any first level page descriptors in case of SYSMMU v5.
Fixes: 740a01eee9 ("iommu/exynos: Add support for v5 SYSMMU")
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Documentation specifies that SYSMMU should be in blocked state while
performing TLB/FLPD cache invalidation, so add needed calls to
sysmmu_block/unblock.
Fixes: 66a7ed84b3 ("iommu/exynos: Apply workaround of caching fault page table entries")
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Usual pattern when we check for return code, which might be negative
errno, is either (ret) or (!ret).
Remove extra ' != 0' from condition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is no need to assign ret to 0 in some cases. Moreover it might
shadow some errors in the future.
Remove such assignments.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is no need to have a temporary variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is inconsistency in return codes across the functions called from
detect_intel_iommu().
Make it consistent and propagate return code to the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch consolidates almost the same code used in iova_insert_rbtree()
and __alloc_and_insert_iova_range() functions. While touching this code,
replace BUG() with WARN_ON(1) to avoid taking down the whole system in
case of corrupted iova tree or incorrect calls.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Do a check for already installed leaf entry at the current level before
dereferencing it in order to avoid walking the page table down with
wrong pointer to the next level.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Do a check for already installed leaf entry at the current level before
dereferencing it in order to avoid walking the page table down with
wrong pointer to the next level.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/mm.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
The APIs that are going to be moved first are:
mm_alloc()
__mmdrop()
mmdrop()
mmdrop_async_fn()
mmdrop_async()
mmget_not_zero()
mmput()
mmput_async()
get_task_mm()
mm_access()
mm_release()
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The link between the iommu sysfs-device and the struct
amd_iommu is no longer stored as driver-data. Update the
code to the new correct way of getting from device to
amd_iommu.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555c2 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The link between the iommu sysfs-device and the struct
intel_iommu is no longer stored as driver-data. Update the
code to use the new access method.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555c2 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We already have the helper, we can convert the rest of the kernel
mechanically using:
git grep -l 'atomic_inc_not_zero.*mm_users' | xargs sed -i 's/atomic_inc_not_zero(&\(.*\)->mm_users)/mmget_not_zero\(\1\)/'
This is needed for a later patch that hooks into the helper, but might
be a worthwhile cleanup on its own.
Link: http://lkml.kernel.org/r/20161218123229.22952-3-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
The callers of the DMA alloc functions already provide the proper
context GFP flags. Make sure to pass them through to the CMA allocator,
to make the CMA compaction context aware.
Link: http://lkml.kernel.org/r/20170127172328.18574-3-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By default CONFIG_INTEL_IOMMU_DEFAULT_ON is not set and thus
dmar_disabled variable is set.
Intel IOMMU driver based on above doesn't set intel_iommu_enabled
variable.
The commit b0119e8708 ("iommu: Introduce new 'struct iommu_device'")
mistakenly assumes it never happens and tries to unregister not ever
registered resources, which crashes the kernel at boot time:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: iommu_device_unregister+0x31/0x60
Make unregister procedure conditional in free_iommu().
Fixes: b0119e8708 ("iommu: Introduce new 'struct iommu_device'")
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
And also move its remaining functionality to
iommu_device_register() and 'struct iommu_device'.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Register Exynos IOMMUs to the IOMMU core and make them
visible in sysfs. This patch does not add the links between
IOMMUs and translated devices yet.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is currently support for iommu sysfs bindings, but
those need to be implemented in the IOMMU drivers. Add a
more generic version of this by adding a struct device to
struct iommu_device and use that for the sysfs bindings.
Also convert the AMD and Intel IOMMU driver to make use of
it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This struct represents one hardware iommu in the iommu core
code. For now it only has the iommu-ops associated with it,
but that will be extended soon.
The register/unregister interface is also added, as well as
making use of it in the Intel and AMD IOMMU drivers.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct is used to link devices to iommu-groups, so
'struct group_device' is a better name. Further this makes
the name iommu_device available for a struct representing
hardware iommus.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename the function to iommu_ops_from_fwnode(), because that
is what the function actually does. The new name is much
more descriptive about what the function does.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In case the device reserved region list is void, the returned value
of iommu_insert_device_resv_regions is uninitialized. Let's return 0
in that case.
This fixes commit 6c65fb318e ("iommu: iommu_get_group_resv_regions").
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the assignment statement into if branch above, where it only
needs to be.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mediatek IOMMU driver enables some drivers that it does not directly
rely on, and that causes a warning for build testing:
warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_VDECSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701)
warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_IMGSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701)
warning: (MTK_IOMMU_V1) selects COMMON_CLK_MT2701_MMSYS which has unmet direct dependencies (COMMON_CLK && COMMON_CLK_MT2701)
This removes the select statements.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Back when this was first written, dma_supported() was somewhat of a
murky mess, with subtly different interpretations being relied upon in
various places. The "does device X support DMA to address range Y?"
uses assuming Y to be physical addresses, which motivated the current
iommu_dma_supported() implementation and are alluded to in the comment
therein, have since been cleaned up, leaving only the far less ambiguous
"can device X drive address bits Y" usage internal to DMA API mask
setting. As such, there is no reason to keep a slightly misleading
callback which does nothing but duplicate the current default behaviour;
we already constrain IOVA allocations to the iommu_domain aperture where
necessary, so let's leave DMA mask business to architecture-specific
code where it belongs.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the IPMMU/VMSA driver supports 32-bit I/O Virtual Addresses
only, and thus sets io_pgtable_cfg.ias = 32. However, it doesn't force
a 32-bit IOVA space through the IOMMU Domain Geometry.
Hence if a device (e.g. SYS-DMAC) rightfully configures a 40-bit DMA
mask, it will still be handed out a 40-bit IOVA, outside the 32-bit IOVA
space, leading to out-of-bounds accesses of the PGD when mapping the
IOVA.
Force a 32-bit IOMMU Domain Geometry to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dma_pte_free_level() recurses down the IOMMU page tables and frees
directory pages that are entirely contained in the given PFN range.
Unfortunately, it incorrectly calculates the starting address covered
by the PTE under consideration, which can lead to it clearing an entry
that is still in use.
This occurs if we have a scatterlist with an entry that has a length
greater than 1026 MB and is aligned to 2 MB for both the IOMMU and
physical addresses. For example, if __domain_mapping() is asked to map a
two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000,
it will ask if dma_pte_free_pagetable() is asked to PFNs from
0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from
0xffff80000 to 0xffff801ff because of this issue. The current code will
set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside
the range being cleared. Properly setting the level_pfn for the current
level under consideration catches that this PTE is outside of the range
being cleared.
This patch also changes the value passed into dma_pte_free_level() when
it recurses. This only affects the first PTE of the range being cleared,
and is handled by the existing code that ensures we start our cursor no
lower than start_pfn.
This was found when using dma_map_sg() to map large chunks of contiguous
memory, which immediatedly led to faults on the first access of the
erroneously-deleted mappings.
Fixes: 3269ee0bd6 ("intel-iommu: Fix leaks in pagetable freeing")
Reviewed-by: Benjamin Serebrin <serebrin@google.com>
Signed-off-by: David Dillow <dillow@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The check to set identity map for tylersburg is done too late. It needs
to be done before the check for identity_map domain is done.
To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes: 86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reported-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Whilst PCI devices may have 64-bit DMA masks, they still benefit from
using 32-bit addresses wherever possible in order to avoid DAC (PCI) or
longer address packets (PCIe), which may incur a performance overhead.
Implement the same optimisation as other allocators by trying to get a
32-bit address first, only falling back to the full mask if that fails.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_dma_init_domain() was originally written under the misconception
that dma_32bit_pfn represented some sort of size limit for IOVA domains.
Since the truth is almost the exact opposite of that, rework the logic
and comments to reflect its real purpose of optimising lookups when
allocating from a subset of the available 64-bit space.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Robin Murphy