Move the GLOBAL_* macros where they belong, in the related global1.h
header. Include it in global2.c which uses GLOBAL_STATUS_IRQ_DEVICE.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the PORT_* macros where they belong, in the related port.h header.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the PHY_* macros where they belong, in the related phy.h header.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mv88e6xxx.h is meant to contains the chip structures and data.
Rename it to chip.h, as for other source/header pairs of the driver.
At the same time, ensure that relative header inclusions are separated
by a newline and sorted alphabetically.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: dsa: Cleanups before multi-CPU port
This patch series does a bunch of cleanups before we start adding support
for multiple CPU ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There was no reason for duplicating the code that initializes
ds->enabled_port_mask in both dsa_parse_ports_dn() and
dsa_parse_ports(), instead move this to dsa_ds_parse() which is early
enough before ops->setup() has run.
While at it, we can now make dsa_is_cpu_port() check ds->cpu_port_mask
which is a step towards being multi-CPU port capable.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have all the information we need in dsa_port, so use it instead of
repeating the same arguments over and over again.
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do not need to have a reference to a dsa_switch, instead we should
pass a reference to a CPU dsa_port, change that. This is a preliminary
change to better support multiple CPU ports.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 9b4437a5b8 ("geneve: Unify LWT and netdev handling.")
when using COLLECT_METADATA geneve devices are created with too small of
a needed_headroom and too large of a max_mtu. This is because
ip_tunnel_info_af() is not valid with the device level info when using
COLLECT_METADATA and we mistakenly fall into the IPv4 case.
For COLLECT_METADATA, always use the worst case of ipv6 since both
sockets are created.
Fixes: 9b4437a5b8 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to f5f99309fa (sock: do not set sk_err in
sock_dequeue_err_skb), sk_err was reset to the error of
the skb on the head of the error queue.
Applications, most notably ping, are relying on this
behavior to reset sk_err for ICMP packets.
Set sk_err to the ICMP error when there is an ICMP packet
at the head of the error queue.
Fixes: f5f99309fa (sock: do not set sk_err in sock_dequeue_err_skb)
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Tested-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xgbe_map_rx_buffer is rather confused about what PAGE_ALLOC_COSTLY_ORDER
means. It uses PAGE_ALLOC_COSTLY_ORDER-1 assuming that
PAGE_ALLOC_COSTLY_ORDER is the first costly order which is not the case
actually because orders larger than that are costly. And even that
applies only to sleeping allocations which is not the case here. We
simply do not perform any costly operations like reclaim or compaction
for those. Simplify the code by dropping the order calculation and use
PAGE_ALLOC_COSTLY_ORDER directly.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The proc_remove call is dead code as it occurs after a return and
hence can never be called. Remove it.
Detected by CoverityScan, CID#1437743 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DCCP uses dccp_write_space() for sk->sk_write_space method.
Unfortunately a passive connection (as provided by accept())
is using the generic sk_stream_write_space() function.
Lets simply inherit sk->sk_write_space from the parent
instead of forcing the generic one.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
functions m88e1510_get_temp_critical, m88e1510_set_temp_critical and
m88e1510_get_temp_alarm can be made static as they not need to be
in global scope.
Cleans up sparse warnings:
"symbol 'm88e1510_get_temp_alarm' was not declared. Should it be static?"
"symbol 'm88e1510_get_temp_critical' was not declared. Should it be
static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which
already have them.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save a bit of code by using the kernel extension.
$ size net/core/net-procfs.o*
text data bss dec hex filename
3701 120 0 3821 eed net/core/net-procfs.o.new
3764 120 0 3884 f2c net/core/net-procfs.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_route_output() requires that the flowlabel contains the traffic
class for policy routing.
Commit 0e9a709560 ("ip6_tunnel, ip6_gre: fix setting of DSCP on
encapsulated packets") removed the code which previously added the
traffic class to the flowlabel.
The traffic class is added here because only route lookup needs the
flowlabel to contain the traffic class.
Fixes: 0e9a709560 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets")
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
Acked-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a problem with reading files larger than 2GB from a UFS-2
file system:
https://bugzilla.kernel.org/show_bug.cgi?id=195721
The incorrect UFS s_maxsize limit became a problem as of commit
c2a9737f45 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
which started using s_maxbytes to avoid a page index overflow in
do_generic_file_read().
That caused files to be truncated on UFS-2 file systems because the
default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.
Here I simply increase the default to a common value used by other file
systems.
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will B <will.brokenbourgh2877@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737f45
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use software polling (PHY_POLL) to check for link state changes instead
of relying on the EMAC's hardware polling feature. Some PHY drivers
are unable to get a functioning link because the HW polling is not
robust enough.
The EMAC is able to poll the PHY on the MDIO bus looking for link state
changes (via the Link Status bit in the Status Register at address 0x1).
When the link state changes, the EMAC triggers an interrupt and tells the
driver what the new state is. The feature eliminates the need for
software to poll the MDIO bus.
Unfortunately, this feature is incompatible with phylib, because it
ignores everything that the PHY core and PHY drivers are trying to do.
In particular:
1. It assumes a compatible register set, so PHYs with different registers
may not work.
2. It doesn't allow for hardware errata that have work-arounds implemented
in the PHY driver.
3. It doesn't support multiple register pages. If the PHY core switches
the register set to another page, the EMAC won't know the page has
changed and will still attempt to read the same PHY register.
4. It only checks the copper side of the link, not the SGMII side. Some
PHY drivers (e.g. at803x) may also check the SGMII side, and
report the link as not ready during autonegotiation if the SGMII link
is still down. Phylib then waits for another interrupt to query
the PHY again, but the EMAC won't send another interrupt because it
thinks the link is up.
Cc: stable@vger.kernel.org # 4.11.x
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If any errors are encountered while walking the device tree structure of
the MDIO bus for children, the code may silently continue, silently
exit, or throw an error and exit. This make it difficult for device
tree writers to know there is an error. Also, it makes any error in a
child entry of the MDIO bus be fatal for all entries. Instead, we
should provide verbose errors describing the error and then attempt to
continue if it all possible. Also, use of_mdio_parse_addr()
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz says:
====================
net: add support for dissection and matching on ip tos and ttl
The 1st two patches enable matching/classifying on ip tos and ttl by
the flow dissector and flower. The other two patches offload matching
on tcp flags and ip tos in mlx5.
The mlx5 patches touch single file/function and not interfere with
other inflight mlx5 submissions.
V2: repost as asked by Dave.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable offloading of TC matching on ipv4 tos or ipv6 traffic-class.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benefit from the support of ip header fields dissection and
allow users to set rules matching on ipv4 tos and ttl or
ipv6 traffic-class and hoplimit.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dissection of ip tos and ttl and ipv6 traffic-class
and hoplimit. Both are dissected into the same struct.
Uses similar call to ip dissection function as with tcp, arp and others.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bugfixes include:
- Fix a typo in commit e092693443 that breaks copy offload
- Fix the connect error propagation in xs_tcp_setup_socket()
- Fix a lock leak in nfs40_walk_client_list
- Verify that pNFS requests lie within the offset range of the layout segment.
-----BEGIN PGP SIGNATURE-----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=P2bm
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Bugfixes include:
- Fix a typo in commit e092693443 ("NFS append COMMIT after
synchronous COPY") that breaks copy offload
- Fix the connect error propagation in xs_tcp_setup_socket()
- Fix a lock leak in nfs40_walk_client_list
- Verify that pNFS requests lie within the offset range of the layout
segment"
* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Mark unnecessarily extern functions as static
SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
NFSv4.0: Fix a lock leak in nfs40_walk_client_list
pnfs: Fix the check for requests in range of layout segment
xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
NFS fix COMMIT after COPY
Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
lot of people reported as causing lockdep and other warnings. Right
after I reverted this in my tree, it seems like another "correct" fix
might have shown up, but it's too late in the release cycle to be
messing with tty core locking, so let's just revert this for now to go
back how things always have been and try it again for 4.13.
This has not been in linux-next as I only reverted it a few hours ago.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWTQplQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymn+ACgi83/vya8tSJ+J7rWBf8n2Nma3VkAoI/5lT8H
gQJub5tZhfB3o7zZrMp4
=bpSk
-----END PGP SIGNATURE-----
Merge tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
lot of people reported as causing lockdep and other warnings.
Right after I reverted this in my tree, it seems like another
"correct" fix might have shown up, but it's too late in the release
cycle to be messing with tty core locking, so let's just revert this
for now to go back how things always have been and try it again for
4.13.
This has not been in linux-next as I only reverted it a few hours ago"
* tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: fix port buffer locking"
Pull input subsystem fixes from Dmitry Torokhov:
- a couple of regression fixes in synaptics and axp20x-pek drivers
- try to ease transition from PS/2 to RMI for Synaptics touchpad users
by ensuring we do not try to activate RMI mode when RMI SMBus support
is not enabled, and nag users a bit to enable it
- plus a couple of other changes that seemed worthwhile for this
release
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
Input: synaptics - tell users to report when they should be using rmi-smbus
Input: synaptics - warn the users when there is a better mode
Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
Input: synaptics - clear device info before filling in
Input: silead - disable interrupt during suspend
Change the mailing list address
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlkzCZwACgkQAyWl4gNJ
NJJerhAAjfDlj7aGmKY4/wOJiTs4isnHDW+TLkABtDbjUK+vJ137JGFqxGyeHh6S
scoSyzGVQlPebVf/RrpeK8u58oa3NbdKRonAfksHRniiAyXefjc2miVqTzMQeK25
GA8uNvICEnAyelgp2vi6dHzUBD8bjs8A3vDgxqqAjCI/ubjQq6nBODh8EpRuH9Pw
PRzrYiiTCVztAvkcgHq3slkOdVYnrByuK0EyFZ/A1+UhO8FDbSfOA2eKjnP81ENs
1otW+8vpm5KoCgoXrVLMogEyqc/G2zDKWbGNGzJMgSsqWW3Pali5crPJ5AOIEEkz
g4+bg1SCdUr2HDcKNGQkShAQJxmwwo57j+MpE9ISfXBzRUc93qAzHJtMOpDuZtow
a8xUWqTga6p/tXCLIWSIhS7aZVOZDrycj1GTfN1IjYGVt7ioUFsLDJqmi6nqp/aD
oO1mzxE3jNo0MDr3KWl5xjPc8FpIgs0xiJZKWRtosynoR69MvEHncpfISFDrNnKM
bIJdARDp20lAwhhXR+GNyIMzdxfG8VSNEoFy4/eKtqyvhT4tdOibVcsj4jI3I6g1
H5wol+IJd/N0Z8oDUMSEvId3/Ntp5OEUCiOGJ7Cgw3cUOFMlRzkkUaFC8tp96HT1
f1BgO2Tit3IsY6vry/zGyoimBXScmegc20/tmoG5pVLHKcKxLog=
=oMqg
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixlet from Alexandre Belloni:
"A single patch, not really a fix but I don't think there is any reason
to delay it.
Change the mailing list address"
* tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
MAINTAINERS: update RTC mailing list
A rc device can call ir_raw_event_handle() after rc_allocate_device(),
but before rc_register_device() has completed. This is racey because
rcdev->raw is set before rcdev->raw->thread has a valid value.
Cc: stable@kernel.org
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Just depend on DEBUG_FS, no need to invent a new kernel config.
Especially since CEC can be enabled by drm without enabling
MEDIA_SUPPORT.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This config option is strictly speaking independent of the
media subsystem since it can be used by drm as well.
Besides, it looks odd when drivers select CEC_CORE and
MEDIA_CEC_NOTIFIER, that's inconsistent naming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CEC framework is used by both drm and media. That makes it tricky
to get the dependencies right.
This patch moves the CEC_CORE and MEDIA_CEC_NOTIFIER config options
out of the media menu and instead drivers that want to use CEC should
select CEC_CORE and MEDIA_CEC_NOTIFIER (if needed).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
exit_loop is not being initialized, so it contains garbage. Ensure it is
initialized to false.
Detected by CoverityScan, CID#1436409 ("Uninitialized scalar variable")
Fixes: ea6a69defd ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several atomisp files use:
ccflags-y += -Werror
As, on media, our usual procedure is to use W=1, and atomisp
has *a lot* of warnings with such flag enabled,like:
./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=]
At the end, it causes our build to fail, impacting our workflow.
So, remove this crap. If one wants to force -Werror, he
can still build with it enabled by passing a parameter to
make.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is nine fixes, seven of which are for the qedi driver (new in
4.10) the other two are a use after free in the cxgbi drivers and a
potential NULL dereference in the rdac device handler.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MYEc
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is nine fixes, seven of which are for the qedi driver (new as of
4.10) the other two are a use after free in the cxgbi drivers and a
potential NULL dereference in the rdac device handler"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libcxgbi: fix skb use after free
scsi: qedi: Fix endpoint NULL panic during recovery.
scsi: qedi: set max_fin_rt default value
scsi: qedi: Set firmware tcp msl timer value.
scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
scsi: qedi: Set dma_boundary to 0xfff.
scsi: qedi: Correctly set firmware max supported BDs.
scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()
- Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes
- A few upper layer protocol fixes (IPoIB, iSER, SRP)
- A modest number of core fixes
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZMIXpAAoJELgmozMOVy/dEHIP/RbIL0lGjH6qOOGUjTYVpFBn
odS0nVWFl/gkw4mnvRDNm3h/BMk0SdaiyUtnRUMEcRhPrqwq40TpT5Sg59LrUgKe
JGKB4oir7OYKGh8f6ublDlfFkdZiyGTXW50qp7+cxIu0FXSIREYWRIXIxdDdNhGK
5+EMCJgT0eUNciRE+RlNV1slrKiMGdKm4N5U2nvgy2u/jk1JIpfhkOXrIPar5Ciq
4Sk2DQoLu2RiMr8Htd49yrXaxxguGX0KpJwdOUv3xNlO4WejkT7KFEYB82NNdu0P
NpnQGZXea7manripqRRrMBnaqkQD7lTtDHJBepmr4cCgY6XVTq3CQFWnsMywP60A
10rHNeGixMH76DdE+kzTKQ2PKlVW4jjW6fk18cZ2GWbH4T9r/OzUnGR3uMJdhgHs
g+zixnIokXa5/8S1p7Pkaq1datAQC4lb2O20c9bjnLM4jQsXMrEnbNevkvouADqj
LWT5i1ZTQ5kquom5LmwTG9CcwPH/1E6xLXw4E41seqoZcqYZJakzACU43mJ450cO
t3Afqz2AWgBa28DAEGy5+YR7Fr5/xof997GTB/eHnzY0E/cSJ+ntrlBLwMMrY9/t
xzE1lZ/7750F9yjkFsLhrU4Xf3snoCg8NW1z7/aaFrx/y+CIKKjP3iRG+JQiKFnx
D9tRKJY8iXPuCG+8OzSx
=X6Rg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"For the most part this is just a minor -rc cycle for the rdma
subsystem. Even given that this is all of the -rc patches since the
merge window closed, it's still only about 25 patches:
- Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes
- A few upper layer protocol fixes (IPoIB, iSER, SRP)
- A modest number of core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits)
RDMA/SA: Fix kernel panic in CMA request handler flow
RDMA/umem: Fix missing mmap_sem in get umem ODP call
RDMA/core: not to set page dirty bit if it's already set.
RDMA/uverbs: Declare local function static and add brackets to sizeof
RDMA/netlink: Reduce exposure of RDMA netlink functions
RDMA/srp: Fix NULL deref at srp_destroy_qp()
RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope
RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings
RDMA/qedr: add null check before pointer dereference
RDMA/mlx5: set UMR wqe fence according to HCA cap
net/mlx5: Define interface bits for fencing UMR wqe
RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
RDMA/hfi1: Defer setting VL15 credits to link-up interrupt
RDMA/hfi1: change PCI bar addr assignments to Linux API functions
RDMA/hfi1: fix array termination by appending NULL to attr array
RDMA/iw_cxgb4: fix the calculation of ipv6 header size
RDMA/iw_cxgb4: calculate t4_eq_status_entries properly
RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers
RDMA/nes: ACK MPA Reply frame
...
This reverts commit 925bb1ce47.
It causes lots of warnings and problems so for now, let's just revert
it.
Reported-by: <valdis.kletnieks@vt.edu>
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.
Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GtgN
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of patches for the aspeed pwm fan driver"
* tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1
hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed
hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT
hwmon: (aspeed-pwm-tacho) Select REGMAP
NAND updates from Boris:
"""
tango fixes:
* Add missing MODULE_DEVICE_TABLE() in tango_nand.c
* Update the number of corrected bitflips
core fixes:
* Fix a long standing memory leak in nand_scan_tail()
* Fix several bugs introduced by the per-vendor init/detection
infrastructure (introduced in 4.12)
* Add a static specifier to nand_ooblayout_lp_hamming_ops definition
"""
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y6Ps
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"NAND updates from Boris:
tango fixes:
- Add missing MODULE_DEVICE_TABLE() in tango_nand.c
- Update the number of corrected bitflips
core fixes:
- Fix a long standing memory leak in nand_scan_tail()
- Fix several bugs introduced by the per-vendor init/detection
infrastructure (introduced in 4.12)
- Add a static specifier to nand_ooblayout_lp_hamming_ops definition"
* tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd:
mtd: nand: make nand_ooblayout_lp_hamming_ops static
mtd: nand: tango: Update ecc_stats.corrected
mtd: nand: tango: Export OF device ID table as module aliases
mtd: nand: samsung: warn about un-parseable ECC info
mtd: nand: free vendor-specific resources in init failure paths
mtd: nand: drop unneeded module.h include
mtd: nand: don't leak buffers when ->scan_bbt() fails
Make fan and pwm names in sysfs start with index 1 in accordance to
Documentation/hwmon/sysfs-interface conventions.
Current implementation starts with index 0, making tools such as
sensors(1) skip the first fan.
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a3e ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Call of_node_put() on a node claimed with of_node_get() or by any other
means such as for_each_child_of_node().
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a3e ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
acpi_dev_found checks that there is a matching ACPI node, but it
may be disabled (_STA method returns 0) in which case the
soc_button_array driver will not bind to it and axp20x-pek should
handle the power-button.
This commit switches from acpi_dev_found to acpi_dev_present to
avoid not registering an input-dev for the powerbutton when there
is a disabled PNP0C40 device.
The ACPI-6.0 standard defines a standard gpio button device using
the ACPI0011 HID replacing the custom PNP0C40 gpio device, many
newer devices define both PNP0C40 and ACPI0011 devices enabling one
or the other depending on whether the BIOS thinks it is going to boot
Android or Windows.
This commit adds a check for the ACPI0011 device, so that if
either device is present *and* enabled we don't register an input-dev
for the powerbutton.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 9b13a4ca8d ("Input: axp20x-pek - do not register input device
on some systems") added a check for the INTCFD9 ACPI device which also
handles the powerbutton as on some systems the powerbutton is connected
to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled
by soc_button_array which attaches itself to the INTCFD9 ACPI device.
Testing + comparing DSDTs has shown that this only happens on Cherry
Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on
Bay Trail devices but there the power button is only connected to
the PMIC and not handled by soc_button_array.
This means that the INTCFD9 check has caused a regression on Bay Trail
devices, causing power-button presses to no longer be seen.
This commit fixes this by limiting the check to devices where the ACPI
node for the AXP288 contains a _HRV (hardware revision) attribute with
a value of 3 which indicates we are dealing with a Cherry Trail platform.
Fixes: 9b13a4ca8d ("Input: axp20x-pek - do not register input ...")
Reported-by: Сергей Трусов <t.rus76@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2lrAAoJEHm+PkMAQRiGm3AH/13F1DlIk05aSXHoDr/idIpR
GMHmk3YF+EuFjsL463Sh6s/SSWmz0Lda8euaoB4wCWvQFX2ZjTE+aOd79XlRiZJQ
OTtLkV9I41eXIJUpEOHia7xZiCsbw+usqcHrm1aBoSh5KKV2iQmEOrnJdibqJVOF
eXUMphNK/zFtAd2bKtQSxkaBnOOqsQUgVQSkr2K9rSg25l0KokFC6c5K5IjLn4x9
QgDY4wmMvHrDz0CtpoqlNM4XqbsDJVrFeZGfg6hlMqSRDeXeg4h3Ol0VfIT496RP
QBdrDb6hWO+HKt9B0M+7Q+8a/Fsw+5dtpqv1W/Wlr0i4CS6euU8NChAmrpkrqGo=
=m5ba
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc3' into for-linus
Merge with mainline to get acpi_dev_present() needed by patches to
axp20x-pek driver.
- Revert one more commit related to the ACPI-based handling of
laptop lids that changed the default behavior on laptops that
booted with closed lids and introduced a regression there
(Benjamin Tissoires).
- Add a missing acpi_put_table() to the code implementing the
/sys/firmware/acpi/tables interface to prevent a counter in
the ACPICA core from overflowing (Dan Williams).
- Drop error messages printed by ACPICA on acpi_get_table()
reference counting mismatches as they need not indicate real
errors at this point (Lv Zheng).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=5CiR
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert one more problematic commit related to the ACPI-based
handling of laptop lids and make some unuseful error messages coming
from ACPICA go away.
Specifics:
- Revert one more commit related to the ACPI-based handling of laptop
lids that changed the default behavior on laptops that booted with
closed lids and introduced a regression there (Benjamin Tissoires).
- Add a missing acpi_put_table() to the code implementing the
/sys/firmware/acpi/tables interface to prevent a counter in the
ACPICA core from overflowing (Dan Williams).
- Drop error messages printed by ACPICA on acpi_get_table() reference
counting mismatches as they need not indicate real errors at this
point (Lv Zheng)"
* tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Tables: Fix regression introduced by a too early mechanism enabling
Revert "ACPI / button: Change default behavior to lid_init_state=open"
ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service
- Make cpufreq_register_driver() return an error if the ->init()
calls fail for all CPUs to prevent non-functional drivers from
hanging around for no reason (David Arcari).
- Make kirkwood-cpufreq check the return value of clk_prepare_enable()
(which may fail) as appropriate (Arvind Yadav).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dmsR
-----END PGP SIGNATURE-----
Merge tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the cpufreq core and in the
kirkwood-cpufreq driver.
Specifics:
- Make cpufreq_register_driver() return an error if the ->init()
calls fail for all CPUs to prevent non-functional drivers from
hanging around for no reason (David Arcari).
- Make kirkwood-cpufreq check the return value of
clk_prepare_enable() (which may fail) as appropriate (Arvind
Yadav)"
* tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
which can causes crashes in drivers/char/random.c:get_reg().
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkxzw8ACgkQ8vlZVpUN
gaMFowf2KbhElx9OO7Nc62adSF8Ni9vJgk9kigOgrHFXCk4AV5L2QtyLBfk9gIOb
QxG62fzs2mnnL26SgnvN+5qbuZch9G0GjZDOQTpAcxvT9EL67oZ5EhM3AJAHckOW
LxSYCJKYBZqvd4dTHZI36gGNfnpYY7O58pRydE1BPPYSftzaQSS0UtMdcBkjCOoc
Kix35I8PpIhXBubgTE2I38FlGHneS442FAGctnMa/8QlqbkCjSqd1V2rdqxvlNvi
lQ4AG+6xLu2r/yCXqwHf18sKjt6XuluqrJTQGdUzarFw20ikURjSxwlu5Rh2PwJk
hyFHMzBlQ7o68XBDk4LzNkNPgBSb
=4W3q
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random bug fix from Ted Ts'o:
"Fix a race on architectures with prioritized interrupts (such as m68k)
which can causes crashes in drivers/char/random.c:get_reg()"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
fix race in drivers/char/random.c:get_reg()
Vivien Didelot