Impact: boot tracer startup modified
The boot tracer calls into some of the schedule tracing private functions
that should not be exported. This patch cleans it up, and makes
way for further changes in the ftrace infrastructure.
This patch adds a api to assign a tracer array to the schedule
context switch tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change where tracing is started up and stopped
Currently, when a new tracer is selected via echo'ing a tracer name into
the current_tracer file, the startup is only done if tracing_enabled is
set to one. If tracing_enabled is changed to zero (by echo'ing 0 into
the tracing_enabled file) a full shutdown is performed.
The full startup and shutdown of a tracer can be expensive and the
user can lose out traces when echo'ing in 0 to the tracing_enabled file,
because the process takes too long. There can also be places that
the user would like to start and stop the tracer several times and
doing the full startup and shutdown of a tracer might be too expensive.
This patch performs the full startup and shutdown when a tracer is
selected. It also adds a way to do a quick start or stop of a tracer.
The quick version is just a flag that prevents the tracing from
taking place, but the overhead of the code is still there.
For example, the startup of a tracer may enable tracepoints, or enable
the function tracer. The stop and start will just set a flag to
have the tracer ignore the calls when the tracepoint or function trace
is called. The overhead of the tracer may still be present when
the tracer is stopped, but no tracing will occur. Setting the tracer
to the 'nop' tracer (or any other tracer) will perform the shutdown
of the tracer which will disable the tracepoint or disable the
function tracer.
The tracing_enabled file will simply start or stop tracing.
This change is all internal. The end result for the user should be the same
as before. If tracing_enabled is not set, no trace will happen.
If tracing_enabled is set, then the trace will happen. The tracing_enabled
variable is static between tracers. Enabling tracing_enabled and
going to another tracer will keep tracing_enabled enabled. Same
is true with disabling tracing_enabled.
This patch will now provide a fast start/stop method to the users
for enabling or disabling tracing.
Note: There were two methods to the struct tracer that were never
used: The methods start and stop. These were to be used as a hook
to the reading of the trace output, but ended up not being
necessary. These two methods are now used to enable the start
and stop of each tracer, in case the tracer needs to do more than
just not write into the buffer. For example, the irqsoff tracer
must stop recording max latencies when tracing is stopped.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix boot tracer + sched tracer coupling bug
Fix a bug that made the sched_switch tracer unable to run
if set as the current_tracer after the boot tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch applies some corrections suggested by Steven Rostedt.
Change the type of shed_ref into int since it is used
into a Mutex, we don't need it anymore as an atomic
variable in the sched_switch tracer.
Also change the name of the register mutex.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enhance boot trace output with scheduling events
Use the sched_switch tracer from the boot tracer.
We also can trace schedule events inside the initcalls.
Sched tracing is disabled after the initcall has finished and
then reenabled before the next one is started.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
When init_sched_switch_trace() is called, it has no reason to start
the sched tracer if the sched_ref is not zero.
_ If this is non-zero, the tracer is already used, but we can register it
to the tracing engine. There is already a security which avoid the tracer
probes not to be resgistered twice.
_ If this is zero, this block will not be used.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix race condition in sched_switch tracer
This patch fixes a race condition in the sched_switch tracer. If
several tasks (IE: concurrent initcalls) are playing with
tracing_start_cmdline_record() and tracing_stop_cmdline_record(), the
following situation could happen:
_ Task A and B are using the same tracepoint probe. Task A holds it.
Task B is sleeping and doesn't hold it.
_ Task A frees the sched tracer, then sched_ref is decremented to 0.
_ Task A is preempted and hadn't yet unregistered its tracepoint
probe, then B runs.
_ B increments sched_ref, sees it's 1 and then guess it has to
register its probe. But it has not been freed by task A.
_ A lot of bad things can happen after that...
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the ring buffer is reentrant, some of the ftrace tracers
(sched_swich, debugging traces) can also be reentrant.
Note: Never make the function tracer reentrant, that can cause
recursion problems all over the kernel. The function tracer
must disable reentrancy.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.
This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable. The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.
This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.
Note: All the function tracers must be careful when using preempt_disable.
It must do the following:
resched = need_resched();
preempt_disable_notrace();
[...]
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.
If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.
If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have two markers now that are enabled on sched_switch. One that records
the context switching and the other that records task wake ups. Currently
we enable the tracing first and then set the markers. This causes some
confusing traces:
# tracer: sched_switch
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
trace-cmd-3973 [00] 115.834817: 3973:120:R + 3: 0:S
trace-cmd-3973 [01] 115.834910: 3973:120:R + 6: 0:S
trace-cmd-3973 [02] 115.834910: 3973:120:R + 9: 0:S
trace-cmd-3973 [03] 115.834910: 3973:120:R + 12: 0:S
trace-cmd-3973 [02] 115.834910: 3973:120:R + 9: 0:S
<idle>-0 [02] 115.834910: 0:140:R ==> 3973:120:R
Here we see that trace-cmd with PID 3973 wakes up task 9 but the next line
shows the idle task doing a context switch to task 3973.
Enabling the tracing to _after_ the markers are set creates a much saner
output:
# tracer: sched_switch
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<idle>-0 [02] 7922.634225: 0:140:R ==> 4790:120:R
trace-cmd-4789 [03] 7922.634225: 0:140:R + 4790:120:R
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new work with converting the trace hooks over to markers broke the
command line recording of ftrace. This patch fixes it again.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Porting ftrace to the marker infrastructure.
Don't need to chain to the wakeup tracer from the sched tracer, because markers
support multiple probes connected.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In cleaning up of the sched_switch code, the function trace recording
of task comms was removed. This patch adds back the recording of comms
for function trace. The output of ftrace now has the task comm instead
of <...>.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
now that we have a kbuild method for notrace, no need to pollute the
C code with the annotations.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Using raw_local_irq_save/restore confuses lockdep.
It's fine to use the normal ones.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt