UMIP does cause any performance penalty to the vast majority of x86 code
that does not use the legacy instructions affected by UMIP.
Also describe UMIP more accurately and explain the behavior that can be
expected by the (few) applications that use the affected instructions.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: ricardo.neri@intel.com
Link: http://lkml.kernel.org/r/1510640985-18412-2-git-send-email-ricardo.neri-calderon@linux.intel.com
[ Spelling fixes, rewrote the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Even though aperfmperf_snapshot_khz() caches the samples.khz value to
return if called again in a sufficiently short time, its caller,
arch_freq_get_on_cpu(), still uses smp_call_function_single() to run it
which may allow user space to trigger an IPI storm by reading from the
scaling_cur_freq cpufreq sysfs file in a tight loop.
To avoid that, move the decision on whether or not to return the cached
samples.khz value to arch_freq_get_on_cpu().
This change was part of commit 941f5f0f6e ("x86: CPU: Fix up "cpu MHz"
in /proc/cpuinfo"), but it was not the reason for the revert and it
remains applicable.
Fixes: 4815d3c56d (cpufreq: x86: Make scaling_cur_freq behave more as expected)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 timer updates from Thomas Gleixner:
"These updates are related to TSC handling:
- Support platforms which have synchronized TSCs but the boot CPU has
a non zero TSC_ADJUST value, which is considered a firmware bug on
normal systems.
This applies to HPE/SGI UV platforms where the platform firmware
uses TSC_ADJUST to ensure TSC synchronization across a huge number
of sockets, but due to power on timings the boot CPU cannot be
guaranteed to have a zero TSC_ADJUST register value.
- Fix the ordering of udelay calibration and kvmclock_init()
- Cleanup the udelay and calibration code"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Mark cyc2ns_init() and detect_art() __init
x86/platform/UV: Mark tsc_check_sync as an init function
x86/tsc: Make CONFIG_X86_TSC=n build work again
x86/platform/UV: Add check of TSC state set by UV BIOS
x86/tsc: Provide a means to disable TSC ART
x86/tsc: Drastically reduce the number of firmware bug warnings
x86/tsc: Skip TSC test and error messages if already unstable
x86/tsc: Add option that TSC on Socket 0 being non-zero is valid
x86/timers: Move simple_udelay_calibration() past kvmclock_init()
x86/timers: Make recalibrate_cpu_khz() void
x86/timers: Move the simple udelay calibration to tsc.h
Pull x86 cache resource updates from Thomas Gleixner:
"This update provides updates to RDT:
- A diagnostic framework for the Resource Director Technology (RDT)
user interface (sysfs). The failure modes of the user interface are
hard to diagnose from the error codes. An extra last command status
file provides now sensible textual information about the failure so
its simpler to use.
- A few minor cleanups and updates in the RDT code"
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix a silent failure when writing zero value schemata
x86/intel_rdt: Fix potential deadlock during resctrl mount
x86/intel_rdt: Fix potential deadlock during resctrl unmount
x86/intel_rdt: Initialize bitmask of shareable resource if CDP enabled
x86/intel_rdt: Remove redundant assignment
x86/intel_rdt/cqm: Make integer rmid_limbo_count static
x86/intel_rdt: Add documentation for "info/last_cmd_status"
x86/intel_rdt: Add diagnostics when making directories
x86/intel_rdt: Add diagnostics when writing the cpus file
x86/intel_rdt: Add diagnostics when writing the tasks file
x86/intel_rdt: Add diagnostics when writing the schemata file
x86/intel_rdt: Add framework for better RDT UI diagnostics
Pull x86 APIC updates from Thomas Gleixner:
"This update provides a major overhaul of the APIC initialization and
vector allocation code:
- Unification of the APIC and interrupt mode setup which was
scattered all over the place and was hard to follow. This also
distangles the timer setup from the APIC initialization which
brings a clear separation of functionality.
Great detective work from Dou Lyiang!
- Refactoring of the x86 vector allocation mechanism. The existing
code was based on nested loops and rather convoluted APIC callbacks
which had a horrible worst case behaviour and tried to serve all
different use cases in one go. This led to quite odd hacks when
supporting the new managed interupt facility for multiqueue devices
and made it more or less impossible to deal with the vector space
exhaustion which was a major roadblock for server hibernation.
Aside of that the code dealing with cpu hotplug and the system
vectors was disconnected from the actual vector management and
allocation code, which made it hard to follow and maintain.
Utilizing the new bitmap matrix allocator core mechanism, the new
allocator and management code consolidates the handling of system
vectors, legacy vectors, cpu hotplug mechanisms and the actual
allocation which needs to be aware of system and legacy vectors and
hotplug constraints into a single consistent entity.
This has one visible change: The support for multi CPU targets of
interrupts, which is only available on a certain subset of
CPUs/APIC variants has been removed in favour of single interrupt
targets. A proper analysis of the multi CPU target feature revealed
that there is no real advantage as the vast majority of interrupts
end up on the CPU with the lowest APIC id in the set of target CPUs
anyway. That change was agreed on by the relevant folks and allowed
to simplify the implementation significantly and to replace rather
fragile constructs like the vector cleanup IPI with straight
forward and solid code.
Furthermore this allowed to cleanly separate the allocation details
for legacy, normal and managed interrupts:
* Legacy interrupts are not longer wasting 16 vectors
unconditionally
* Managed interrupts have now a guaranteed vector reservation, but
the actual vector assignment happens when the interrupt is
requested. It's guaranteed not to fail.
* Normal interrupts no longer allocate vectors unconditionally
when the interrupt is set up (IO/APIC init or MSI(X) enable).
The mechanism has been switched to a best effort reservation
mode. The actual allocation happens when the interrupt is
requested. Contrary to managed interrupts the request can fail
due to vector space exhaustion, but drivers must handle a fail
of request_irq() anyway. When the interrupt is freed, the vector
is handed back as well.
This solves a long standing problem with large unconditional
vector allocations for a certain class of enterprise devices
which prevented server hibernation due to vector space
exhaustion when the unused allocated vectors had to be migrated
to CPU0 while unplugging all non boot CPUs.
The code has been equipped with trace points and detailed debugfs
information to aid analysis of the vector space"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE
PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code
genirq: Add config option for reservation mode
x86/vector: Use correct per cpu variable in free_moved_vector()
x86/apic/vector: Ignore set_affinity call for inactive interrupts
x86/apic: Fix spelling mistake: "symmectic" -> "symmetric"
x86/apic: Use dead_cpu instead of current CPU when cleaning up
ACPI/init: Invoke early ACPI initialization earlier
x86/vector: Respect affinity mask in irq descriptor
x86/irq: Simplify hotplug vector accounting
x86/vector: Switch IOAPIC to global reservation mode
x86/vector/msi: Switch to global reservation mode
x86/vector: Handle managed interrupts proper
x86/io_apic: Reevaluate vector configuration on activate()
iommu/amd: Reevaluate vector configuration on activate()
iommu/vt-d: Reevaluate vector configuration on activate()
x86/apic/msi: Force reactivation of interrupts at startup time
x86/vector: Untangle internal state from irq_cfg
x86/vector: Compile SMP only code conditionally
x86/apic: Remove unused callbacks
...
Pull smp/hotplug updates from Thomas Gleixner:
"No functional changes, just removal of obsolete and outdated defines,
macros and documentation"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Get rid of CPU hotplug notifier leftovers
cpu/hotplug: Remove obsolete notifier macros
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- a refactoring of the early virt init code by merging 'struct
x86_hyper' into 'struct x86_platform' and 'struct x86_init', which
allows simplifications and also the addition of a new
->guest_late_init() callback. (Juergen Gross)
- timer_setup() conversion of the UV code (Kees Cook)"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/xen: Use guest_late_init to detect Xen PVH guest
x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure
x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA
x86/virt: Add enum for hypervisors to replace x86_hyper
x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init'
x86/platform/UV: Convert timers to use timer_setup()
Pull x86 debug update from Ingo Molnar:
"A single change enhancing stack traces by hiding wrapper function
entries"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/stacktrace: Avoid recording save_stack_trace() wrappers
Pull x86 cleanups from Ingo Molnar:
"Two changes: Propagate const/__initconst, and use ARRAY_SIZE() some
more"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/events/amd/iommu: Make iommu_pmu const and __initconst
x86: Use ARRAY_SIZE
Pull x86 core updates from Ingo Molnar:
"Note that in this cycle most of the x86 topics interacted at a level
that caused them to be merged into tip:x86/asm - but this should be a
temporary phenomenon, hopefully we'll back to the usual patterns in
the next merge window.
The main changes in this cycle were:
Hardware enablement:
- Add support for the Intel UMIP (User Mode Instruction Prevention)
CPU feature. This is a security feature that disables certain
instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)
[ Note that this is disabled by default for now, there are some
smaller enhancements in the pipeline that I'll follow up with in
the next 1-2 days, which allows this to be enabled by default.]
- Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
feature, on top of SME (Secure Memory Encryption) support that was
added in v4.14. (Tom Lendacky, Brijesh Singh)
- Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)
Other changes:
- A big series of entry code simplifications and enhancements (Andy
Lutomirski)
- Make the ORC unwinder default on x86 and various objtool
enhancements. (Josh Poimboeuf)
- 5-level paging enhancements (Kirill A. Shutemov)
- Micro-optimize the entry code a bit (Borislav Petkov)
- Improve the handling of interdependent CPU features in the early
FPU init code (Andi Kleen)
- Build system enhancements (Changbin Du, Masahiro Yamada)
- ... plus misc enhancements, fixes and cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
x86/build: Make the boot image generation less verbose
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
x86/traps: Fix up general protection faults caused by UMIP
x86/umip: Enable User-Mode Instruction Prevention at runtime
x86/umip: Force a page fault when unable to copy emulated result to user
x86/umip: Add emulation code for UMIP instructions
x86/cpufeature: Add User-Mode Instruction Prevention definitions
x86/insn-eval: Add support to resolve 16-bit address encodings
x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
x86/insn-eval: Add support to resolve 32-bit address encodings
x86/insn-eval: Compute linear address in several utility functions
resource: Fix resource_size.cocci warnings
X86/KVM: Clear encryption attribute when SEV is active
X86/KVM: Decrypt shared per-cpu variables when SEV is active
percpu: Introduce DEFINE_PER_CPU_DECRYPTED
x86: Add support for changing memory encryption attribute in early boot
x86/io: Unroll string I/O when SEV is active
x86/boot: Add early boot support when running with SEV active
...
Pull scheduler updates from Ingo Molnar:
"The main updates in this cycle were:
- Group balancing enhancements and cleanups (Brendan Jackman)
- Move CPU isolation related functionality into its separate
kernel/sched/isolation.c file, with related 'housekeeping_*()'
namespace and nomenclature et al. (Frederic Weisbecker)
- Improve the interactive/cpu-intense fairness calculation (Josef
Bacik)
- Improve the PELT code and related cleanups (Peter Zijlstra)
- Improve the logic of pick_next_task_fair() (Uladzislau Rezki)
- Improve the RT IPI based balancing logic (Steven Rostedt)
- Various micro-optimizations:
- better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi)
- better idle loop (Cheng Jian)
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
sched/sysctl: Fix attributes of some extern declarations
sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated
sched/isolation: Add basic isolcpus flags
sched/isolation: Move isolcpus= handling to the housekeeping code
sched/isolation: Handle the nohz_full= parameter
sched/isolation: Introduce housekeeping flags
sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL
sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu()
sched/isolation: Use its own static key
sched/isolation: Make the housekeeping cpumask private
sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu()
sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version
sched/isolation: Move housekeeping related code to its own file
sched/idle: Micro-optimize the idle loop
sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK
x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter
sched/rt: Simplify the IPI based RT balancing logic
block/ioprio: Use a helper to check for RT prio
sched/rt: Add a helper to test for a RT task
...
Pull RAS updates from Ingo Molnar:
"Two minor updates to AMD SMCA support, plus a timer_setup() conversion"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE/AMD: Fix mce_severity_amd_smca() signature
x86/MCE/AMD: Always give panic severity for UC errors in kernel context
x86/mce: Convert timers to use timer_setup()
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel:
- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)
- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)
- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)
Tooling:
- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)
- 'perf trace' updates (Arnaldo Carvalho de Melo)
- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)
- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)
- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)
- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)
- perf sched timehist enhancements (David Ahern)
- ... various other enhancements, updates, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are:
- Documentation updates
- RCU CPU stall-warning updates
- Torture-test updates
- Miscellaneous fixes
Size wise the biggest updates are to documentation. Excluding
documentation most of the code increase comes from a single commit
which expands debugging"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
srcu: Add parameters to SRCU docbook comments
doc: Rewrite confusing statement about memory barriers
memory-barriers.txt: Fix typo in pairing example
rcu/segcblist: Include rcupdate.h
rcu: Add extended-quiescent-state testing advice
rcu: Suppress lockdep false-positive ->boost_mtx complaints
rcu: Do not include rtmutex_common.h unconditionally
torture: Provide TMPDIR environment variable to specify tmpdir
rcutorture: Dump writer stack if stalled
rcutorture: Add interrupt-disable capability to stall-warning tests
rcu: Suppress RCU CPU stall warnings while dumping trace
rcu: Turn off tracing before dumping trace
rcu: Make RCU CPU stall warnings check for irq-disabled CPUs
sched,rcu: Make cond_resched() provide RCU quiescent state
sched: Make resched_cpu() unconditional
irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP
rcu: Create call_rcu_tasks() kthread at boot time
rcu: Fix up pending cbs check in rcu_prepare_for_idle
memory-barriers: Rework multicopy-atomicity section
memory-barriers: Replace uses of "transitive"
...
so John Stultz can drop that code.
-----BEGIN PGP SIGNATURE-----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=PDUR
-----END PGP SIGNATURE-----
Merge tag 'please-pull-gettime_vsyscall_update' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 update from Tony Luck:
"Stop ia64 being the last holdout using GENERIC_TIME_VSYSCALL_OLD so
that John Stultz can drop that code"
* tag 'please-pull-gettime_vsyscall_update' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64: Update fsyscall gettime to use modern vsyscall_update
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as true"
get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of the
necessary data-structures to be per-cpu.
- The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push it
together with these patches.
-----BEGIN PGP SIGNATURE-----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=euP7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The OpenRISC work is a bit more interesting this time, adding SMP
support and a few general cleanups.
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as
true" get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of
the necessary data-structures to be per-cpu.
The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push
it together with these patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: fix possible deadlock scenario during timer sync
openrisc: pass endianness info to sparse
openrisc: add tick timer multi-core sync logic
openrisc: enable LOCKDEP_SUPPORT and irqflags tracing
openrisc: support framepointers and STACKTRACE_SUPPORT
openrisc: add simple_smp dts and defconfig for simulators
openrisc: add cacheflush support to fix icache aliasing
openrisc: sleep instead of spin on secondary wait
openrisc: fix initial preempt state for secondary cpu tasks
openrisc: initial SMP support
irqchip: add initial support for ompic
dt-bindings: add openrisc to vendor prefixes list
openrisc: use qspinlocks and qrwlocks
openrisc: add 1 and 2 byte cmpxchg support
openrisc: use shadow registers to save regs on exception
dt-bindings: openrisc: Add OpenRISC platform SoC
Documentation: openrisc: Updates to README
Documentation: Move OpenRISC docs out of arch/
MAINTAINERS: Add OpenRISC pic maintainer
openrisc: dts: or1ksim: Add stdout-path
- More printk modernization,
- Various cleanups and fixes (incl. a race condition) for Mac,
- Defconfig updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cuxe
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- more printk modernization
- various cleanups and fixes (incl. a race condition) for Mac
- defconfig updates
* tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.14-rc7
m68k/mac: Add mutual exclusion for IOP interrupt polling
m68k/mac: Disentangle VIA/RBV and NuBus initialization
m68k/mac: Disentangle VIA and OSS initialization
m68k/mac: More printk modernization
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
Pull m68k updates from Greg Ungerer:
"The bulk of the changes are to support the ColdFire 5441x SoC family
with their MMU enabled. The parts have been supported for a long time
now, but only in no-MMU mode.
Angelo Dureghello has a new board with a 5441x and we have ironed out
the last problems with MMU enabled on it. So there is also some
changes to properly support that board too.
Also a fix for a link problem when selecting the traditional 68k beep
device in no-MMU configurations"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: add Sysam stmark2 open board support
m68k: coldfire: add dspi0 module support
m68k: pull mach_beep in setup.c
m68k: allow ColdFire m5441x parts to run with MMU enabled
m68k: fix ColdFire node shift size calculation
m68k: move coldfire MMU initialization code
Pull security subsystem integrity updates from James Morris:
"There is a mixture of bug fixes, code cleanup, preparatory code for
new functionality and new functionality.
Commit 26ddabfe96 ("evm: enable EVM when X509 certificate is
loaded") enabled EVM without loading a symmetric key, but was limited
to defining the x509 certificate pathname at build. Included in this
set of patches is the ability of enabling EVM, without loading the EVM
symmetric key, from userspace. New is the ability to prevent the
loading of an EVM symmetric key."
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ima: Remove redundant conditional operator
ima: Fix bool initialization/comparison
ima: check signature enforcement against cmdline param instead of CONFIG
module: export module signature enforcement status
ima: fix hash algorithm initialization
EVM: Only complain about a missing HMAC key once
EVM: Allow userspace to signal an RSA key has been loaded
EVM: Include security.apparmor in EVM measurements
ima: call ima_file_free() prior to calling fasync
integrity: use kernel_read_file_from_path() to read x509 certs
ima: always measure and audit files in policy
ima: don't remove the securityfs policy file
vfs: fix mounting a filesystem with i_version
Pull general security subsystem updates from James Morris:
"TPM (from Jarkko):
- essential clean up for tpm_crb so that ARM64 and x86 versions do
not distract each other as much as before
- /dev/tpm0 rejects now too short writes (shorter buffer than
specified in the command header
- use DMA-safe buffer in tpm_tis_spi
- otherwise mostly minor fixes.
Smack:
- base support for overlafs
Capabilities:
- BPRM_FCAPS fixes, from Richard Guy Briggs:
The audit subsystem is adding a BPRM_FCAPS record when auditing
setuid application execution (SYSCALL execve). This is not expected
as it was supposed to be limited to when the file system actually
had capabilities in an extended attribute. It lists all
capabilities making the event really ugly to parse what is
happening. The PATH record correctly records the setuid bit and
owner. Suppress the BPRM_FCAPS record on set*id.
TOMOYO:
- Y2038 timestamping fixes"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits)
MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries
Smack: Base support for overlayfs
MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys
tomoyo: fix timestamping for y2038
capabilities: audit log other surprising conditions
capabilities: fix logic for effective root or real root
capabilities: invert logic for clarity
capabilities: remove a layer of conditional logic
capabilities: move audit log decision to function
capabilities: use intuitive names for id changes
capabilities: use root_priveleged inline to clarify logic
capabilities: rename has_cap to has_fcap
capabilities: intuitive names for cap gain status
capabilities: factor out cap_bprm_set_creds privileged root
tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX
tpm: fix duplicate inline declaration specifier
tpm: fix type of a local variables in tpm_tis_spi.c
tpm: fix type of a local variable in tpm2_map_command()
tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl()
tpm-dev-common: Reject too short writes
...
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3Gvx
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups"
* tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute
dt-bindings: sdhci-fujitsu: document cmd-dat-delay property
mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
mmc: dw_mmc: Convert timers to use timer_setup()
mmc: dw_mmc: Cleanup the DTO timer like the CTO one
mmc: vub300: Use common code in __download_offload_pseudocode()
mmc: tmio: Use common error handling code in tmio_mmc_host_probe()
mmc: Convert timers to use timer_setup()
mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers
mmc: sdhci-acpi: Let devices define their own private data
mmc: mediatek: perfer to use rise edge latching for cmd line
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: add latch-ck support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add busy_check support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add pad_tune0 support
mmc: mediatek: make hs400_tune_response only for mt8173
arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
...
As reported by kernelci and other build bots, we now get a link
failure without CONFIG_KALLSYMS:
module.c:(.text+0xf2c): undefined reference to `kallsyms_show_value'
This adds a dummy helper with the same name that can be used
for compilation. It's not entirely clear to me what this
should return for !CONFIG_KALLSYMS, I picked an unconditional
'false', which leads to the module address being unavailable
to user space.
Link: https://kernelci.org/build/mainline/branch/master/kernel/v4.14-5-g516fb7f2e73d/
Fixes: 516fb7f2e7 ("/proc/module: use the same logic as /proc/kallsyms for address exposure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building kallsyms fails without CONFIG_PRINTK due to a missing
declaration:
kernel/kallsyms.c: In function 'kallsyms_show_value':
kernel/kallsyms.c:670:10: error: 'kptr_restrict' undeclared (first use in this function); did you mean 'keyring_restrict'?
This moves the declaration outside of the #ifdef guard, the definition
is already available without CONFIG_PRINTK.
Fixes: c0f3ea1589 ("stop using '%pK' for /proc/kallsyms pointer values")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ I clearly need to start doing "allnoconfig" builds too, or just have a
test branch for the 0day robot - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After several quiet kernel releases we've got a couple of new features
in regmap, support for using hwspinlocks as the lock for the internal
data structures and a helper for polling on regmap_fields. The Kconfig
dependencies on hwspinlocks were annoyingly difficult to squash between
things behaving surprisingly and randconfig, I could've squashed those
commits down but might've have caused hassle with other trees trying to
use the new support.
- Support for using a hwspinlock to protect the regmap.
- An iopoll style helper for regmap_field.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJkKUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Nr7B/9XaAdcoGg1FbcNeKrQN88VqGX8pU4W
hcVMP4XdMxuBPmp/Rbkdkogvl8//MBGzn7jWnZBU59xkLnB0PfNB/JB5VdOrqT6w
k+TdPNbs7s7cxTYubRBguhhEmC85gu2hiNCl+zlurPNBqHIhXXSVq+dNqlw4g4zI
0cm0bTxSCLOppoBPXQXFxa4fAXopNPWeAF7Cg8+oMl6er8p7iILkxFK31JuafKjZ
95RU0ikdmPHhV3OXrcE914hXnhFBM2VQ56z9BI84pwNONdRwWd10wRkoQ7zj4WDN
qvNFY8mU/Bg6rHLI4Z2Ksj3zkLQs7VKBgdUL2dGPC/l3WElfFtF0sVkk
=FBMj
-----END PGP SIGNATURE-----
Merge tag 'regmap-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"After several quiet kernel releases we've got a couple of new features
in regmap, support for using hwspinlocks as the lock for the internal
data structures and a helper for polling on regmap_fields. The Kconfig
dependencies on hwspinlocks were annoyingly difficult to squash
between things behaving surprisingly and randconfig, I could've
squashed those commits down but might've have caused hassle with other
trees trying to use the new support.
- support for using a hwspinlock to protect the regmap
- an iopoll style helper for regmap_field"
* tag 'regmap-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix unused warning
regmap: Try to work around Kconfig exploding on HWSPINLOCK
regmap: Clean up hwspinlock on regmap exit
regmap: Also protect hwspinlock in error handling path
regmap: Add a config option for hwspinlock
regmap: Add hardware spinlock support
regmap: avoid -Wint-in-bool-context warning
regmap: add iopoll-like polling macro for regmap_field
regmap: constify regmap_bus structures
regmap: Avoid namespace collision within macro & tidy up
This release is almost entirely driver changes, there's a couple of
fixes in the core but otherwise it's all drivers:
- Fix for mixed dynamic and static bus number assignment.
- Fixes for some leaks arising from confusing lifetime rules during
device unregistration and improved documentation to try to help avoid
this in the future.
- Fixes to make the native chip select support for i.MX usable.
- Slave mode support for i.MX.
- Support for Coldfire MCF5441x DSPI, Renesas R8A7443/5 and Spreadtrum
ADI.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJi2ATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0IehB/9cM3BMqbo6cSkKvYRcBOHyQZqtBkbc
LlLcMt9hpqWPA9oYU6D6SnZrMDNz8fr8YmpP279OWFJc/l8vuMpzOCz2tOB/OZyE
9fANUhu98HioVS48vN0rlgsaW48rQDothtvwbAP8ED2LGivhruay6G+oG062r7/V
nneWD8YQLmNSd4FaA2qKl0DNI7afkmnqakhX/c9cvctZvGCJmxW//Y20cOyiSL7T
g0DXk5yirZGI/wO5WxOfCXT9lDCdz8XYZJmOC/Uh5X9gc4qmK8RSC/ydsmRwWDFm
4Xq542cooKFyuMQLiVqi3ukixk8rMi7htGN464m9aMAu2Hn4IuJjZaOh
=wkKu
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely driver changes, there's a couple of
fixes in the core but otherwise it's all drivers:
- fix for mixed dynamic and static bus number assignment.
- fixes for some leaks arising from confusing lifetime rules during
device unregistration and improved documentation to try to help
avoid this in the future.
- fixes to make the native chip select support for i.MX usable.
- slave mode support for i.MX.
- support for Coldfire MCF5441x DSPI, Renesas R8A7443/5 and
Spreadtrum ADI"
* tag 'spi-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (31 commits)
spi: imx: Don't require platform data chipselect array
spi: imx: Fix failure path leak on GPIO request error
spi: imx: GPIO based chip selects should not be required
spi: sh-msiof: remove redundant pointer dev
spi: s3c64xx: remove redundant pointer sci
spi: spi-fsl-dspi: enabling Coldfire mcf5441x dspi
spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
spi: orion: remove redundant assignment of status to zero
spi: sh-msiof: Fix DMA transfer size check
spi: imx: Fix failure path leak on GPIO request error
spi: spi-axi: fix potential use-after-free after deregistration
spi: document odd controller reference handling
spi: fix use-after-free at controller deregistration
spi: sprd: Fix the possible negative value of BIT()
spi: sprd-adi: fix platform_no_drv_owner.cocci warnings
spi: a3700: Change SPI mode before asserting chip-select
spi: tegra114: correct register name in definition
spi: spreadtrum adi: add hwspinlock dependency
spi: sh-msiof: Use of_device_get_match_data() helper
spi: rspi: Use of_device_get_match_data() helper
...
A very quiet release for regulator, there's some new device support in
existing drivers here and a few fixes but nothing in the core.
- New device support for Allwinner AXP813, Dialog DA223/4/5 and
Qualcomm PMI8994.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJiBsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KnrB/9L5kIGtjmm6PJkR78TKzCY5AHFTQ9U
tSjcBPqv6Sr69PW4qMC56WlhE0VUyhEldFHvxF2UHoZh7j+FZ48LVmwzNnPCt0AN
Tm9/Okbhzkhzde+bkLSP2mlZ1R3qJH3iBuFYpK/QXRRpzbfW9K/OJCKY1oxexlnD
Cq512fZM/Ez1HG5pIpcDslCh+5Ykgyu8ltdka1LnGLZI8EHmXcMulV6S1dGBjkrG
5IzlFIzJ2rAF8c2pVSGqS2rjQJeKJADdWvIlCeDyyohO1ybWfDOuOLd61DhrxOKL
N4z/4XEtxkcfrCNza01uL8HhwEx3SBjo2xOn3gEwVFXvcbRiqtr3u/c4
=2Dac
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A very quiet release for regulator, there's some new device support in
existing drivers here and a few fixes but nothing in the core.
Summary:
- New device support for Allwinner AXP813, Dialog DA223/4/5 and
Qualcomm PMI8994"
* tag 'regulator-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65218: remove unused tps_info structure
regulator: tps65218: Fix strobe assignment
regulator: qcom_spmi: Include offset when translating voltages
regulator: qcom_spmi: Add support for pmi8994
regulator: da9211: update for supporting da9223/4/5
ASoC: pfuze100: Remove leading zero from '@08' notation
regulator: axp20x: Simplify axp20x_is_polyphase_slave implementation
regulator: axp20x: Add support for AXP813 regulators
- Drivers for MAX31785 and MAX6621
- Support for AMD family 17h (Ryzen, Threadripper) temperature sensors
- Various driver cleanups and minor improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NpxT
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- drivers for MAX31785 and MAX6621
- support for AMD family 17h (Ryzen, Threadripper) temperature sensors
- various driver cleanups and minor improvements
* tag 'hwmon-for-linus-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits)
dt-bindings: pmbus: Add Maxim MAX31785 documentation
pmbus: Add driver for Maxim MAX31785 Intelligent Fan Controller
hwmon: (aspeed-pwm-tacho) Sort headers
hwmon: (xgene) Minor clean up of ifdef and acpi_match_table reference
hwmon: (max6621) Inverted if condition in max6621_read()
hwmon: (asc7621) remove redundant assignment to newval
hwmon: (xgene) Support hwmon v2
hwmon: (gpio-fan) Fix null pointer dereference at probe
hwmon: (gpio-fan) Convert to use GPIO descriptors
hwmon: (gpio-fan) Rename GPIO line state variables
hwmon: (gpio-fan) Get rid of the gpio alarm struct
hwmon: (gpio-fan) Get rid of platform data struct
hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path
hwmon: (gpio-fan) Send around device pointer
hwmon: (gpio-fan) Localize platform data
hwmon: (gpio-fan) Use local variable pointers
hwmon: (gpio-fan) Move DT bindings to the right place
Documentation: devicetree: add max6621 device
hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor
hwmon: (w83793) make const array watchdog_minors static, reduces object code size
...
Worth noting are the changes to ghes_edac to use a whitelist of
known-good platforms on which GHES error reporting works relatively
reliably. By Toshi Kani and Borislav Petkov.
-----BEGIN PGP SIGNATURE-----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=XEah
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"The usual pile of bugfixes, cleanups and minor driver enhancements.
Worth noting are the changes to ghes_edac to use a whitelist of
known-good platforms on which GHES error reporting works relatively
reliably. By Toshi Kani and Borislav Petkov"
* tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Fix missing break in switch
MAINTAINERS: Split Cavium EDAC entry and add myself
EDAC, sb_edac: Fix missing DIMM sysfs entries with KNL SNC2/SNC4 mode
EDAC, skx_edac: Handle systems with segmented PCI busses
EDAC, thunderx: Remove suspend/resume support
EDAC, skx_edac: Fix detection of single-rank DIMMs
EDAC, sb_edac: Don't create a second memory controller if HA1 is not present
EDAC: Add owner check to the x86 platform drivers
EDAC: Add helper which returns the loaded platform driver
EDAC, ghes: Add platform check
EDAC, ghes: Model a single, logical memory controller
EDAC, ghes: Remove symbol exports
EDAC: Handle return value of kasprintf()
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from Sayli
Karnic will point out kerneldoc comments that are not actually used in
the documentation. Jani Nikula's documentation-file-ref-check finds
references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
-----BEGIN PGP SIGNATURE-----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=H6ud
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from
Sayli Karnic will point out kerneldoc comments that are not actually
used in the documentation. Jani Nikula's
documentation-file-ref-check finds references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
This set reaches outside of Documentation/ a bit more than most. In
all cases, the changes are to comment docs, mostly from Randy, in
places where there didn't seem to be anybody better to take them"
* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
documentation: fb: update list of available compiled-in fonts
MAINTAINERS: update DMAengine documentation location
dmaengine: doc: ReSTize pxa_dma doc
dmaengine: doc: ReSTize dmatest doc
dmaengine: doc: ReSTize client API doc
dmaengine: doc: ReSTize provider doc
dmaengine: doc: Add ReST style dmaengine document
ftrace/docs: Add documentation on how to use ftrace from within the kernel
bug-hunting.rst: Fix an example and a typo in a Sphinx tag
scripts: Add a script to find unused documentation
samples: Convert timers to use timer_setup()
documentation: kernel-api: add more info on bitmap functions
Documentation: fix selftests related file refs
Documentation: fix ref to power basic-pm-debugging
Documentation: fix ref to trace stm content
Documentation: fix ref to coccinelle content
Documentation: fix ref to workqueue content
Documentation: fix ref to sphinx/kerneldoc.py
Documentation: fix locking rt-mutex doc refs
docs: dev-tools: correct Coccinelle version number
...
The CPU hotplug notifiers are history. Remove the last reminders.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The jprobes APIs are deprecated - but are still in occasional use for code that
few people seem to care about, so stop generating deprecation warnings.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The (alleged) users of the module addresses are the same: kernel
profiling.
So just expose the same helper and format macros, and unify the logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code goes back to the historical bitkeeper tree commit 3f7b0672086
("Module section offsets in /sys/module"), where Jonathan Corbet wanted
to show people how to debug loadable modules.
See
https://lwn.net/Articles/88052/
from June 2004.
To expose the required load address information, Jonathan added the
sections subdirectory for every module in /sys/modules, and made them
S_IRUGO - readable by everybody.
It was a more innocent time, plus those S_IRxxx macro names are a lot
more confusing than the octal numbers are, so maybe it wasn't even
intentional. But here we are, thirteen years later, and I'll just change
it to S_IRUSR instead.
Let's see if anybody even notices.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge /proc/kallsyms pointer value restrictions.
Instead of using %pK, and making it about root access (at the wrong
time, no less), make the whole choice of whether to show the actual
pointer value be very explicit to the kallsyms code.
In particular, we can now default to not doing so, and yet avoid
annoying kernel profiling by actually looking at whether kernel
profiling is allowed or not (by default it is not).
This is all mostly preparation for the real "let's stop leaking kernel
addresses" work that Tobin Harding is working on.
Small steps.
* kallsyms-restrictions:
stop using '%pK' for /proc/kallsyms pointer values
If ffz() ever returns a value >= 31 then the following shift is undefined
behaviour because the literal 1 which gets shifted is treated as signed
integer.
In practice, the bug is probably harmless, since the first undefined shift
count is 31 which results - ignoring UB - in (int)(0x80000000). This gets
sign extended so bit 32-63 will be set as well and all subsequent
__setup_irq() calls would just end up hitting the -EBUSY branch.
However, a sufficiently aggressive optimizer may use the UB of 1<<31
to decide that doesn't happen, and hence elide the sign-extension
code, so that subsequent calls can indeed get ffz > 31.
In any case, the right thing to do is to make the literal 1UL.
[ tglx: For this to happen a single interrupt would have to be shared by 32
devices. Hardware like that does not exist and would have way more
problems than that. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171030213548.16831-1-linux@rasmusvillemoes.dk
data has been already derefenced unconditionally, so it's pointless to do a
NULL pointer check on it afterwards. Drop it.
[ tglx: Depersonify changelog. ]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20171112212904.28574-1-linux@rasmusvillemoes.dk
write_irq_affinity() returns the number of written bytes, which means
success, unconditionally whether the actual irq_set_affinity() call
succeeded or not.
Add proper error handling and pass the error code returned from
irq_set_affinity() back to user space in case of failure.
[ tglx: Fixed coding style and massaged changelog ]
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: zhong.weidong@zte.com.cn
Link: https://lkml.kernel.org/r/1510106103-184761-1-git-send-email-wen.yang99@zte.com.cn
Partially revert commit 2fa3656829 ("kbuild: soften MODULE_LICENSE
check") so that modpost detects modules that do not have a
MODULE_LICENSE.
Sam's commit also changed the fatal error to a warning, which I am
leaving as is.
This gives advance notice of when a module has no license and will taint
the kernel if the module is loaded.
This produces the following warnings on x86_64 allmodconfig:
MODPOST 6520 modules
WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/accel/kxsd9-i2c.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/adc/qcom-vadc-common.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pxa/pinctrl-pxa2xx.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/rpmsg/qcom_glink_native.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/comedi/drivers/ni_atmio.o
WARNING: modpost: missing MODULE_LICENSE() in net/9p/9pnet_xen.o
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes:
- make KGDB work again which got broken by the conversion of WARN()
to #UD. The WARN fixup needs to run before the notifier callchain,
otherwise KGDB tries to handle it and crashes.
- disable KASAN in the ORC unwinder to prevent false positive KASAN
warnings
- prevent default mapping above 47bit when 5 level page tables are
enabled
- make the delay calibration optimization work correctly, which had
the conditionals the wrong way around and was operating on data
which was not yet updated.
- remove the bogus X86_TRAP_BP trap init from the default IDT init
table, which broke 32bit int3 handling by overwriting the correct
int3 setup.
- replace this_cpu* with boot_cpu_data access in the preemptible
oprofile init code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Handle warnings before the notifier chain, to fix KGDB crash
x86/mm: Fix ELF_ET_DYN_BASE for 5-level paging
x86/idt: Remove X86_TRAP_BP initialization in idt_setup_traps()
x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context
x86/unwind: Disable KASAN checking in the ORC unwinder
x86/smpboot: Make optimization of delay calibration work correctly
Pull perf tool fixes from Thomas Gleixner:
"A small set of fixes for perf tool:
- synchronize the i915 drm header to avoid the 'out of date' warning
- make sure that perf trace cleans up its temporary files on exit
- unbreak the build with newer flex versions
- add missing braces in the eBPF parsing rules"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI header
perf trace: Call machine__exit() at exit
perf tools: Fix eBPF event specification parsing
perf tools: Add "reject" option for parse-events.l
Add a function, similar to mod_timer(), that will start a timer if it isn't
running and will modify it if it is running and has an expiry time longer
than the new time. If the timer is running with an expiry time that's the
same or sooner, no change is made.
The function looks like:
int timer_reduce(struct timer_list *timer, unsigned long expires);
This can be used by code such as networking code to make it easier to share
a timer for multiple timeouts. For instance, in upcoming AF_RXRPC code,
the rxrpc_call struct will maintain a number of timeouts:
unsigned long ack_at;
unsigned long resend_at;
unsigned long ping_at;
unsigned long expect_rx_by;
unsigned long expect_req_by;
unsigned long expect_term_by;
each of which is set independently of the others. With timer reduction
available, when the code needs to set one of the timeouts, it only needs to
look at that timeout and then call timer_reduce() to modify the timer,
starting it or bringing it forward if necessary. There is no need to refer
to the other timeouts to see which is earliest and no need to take any lock
other than, potentially, the timer lock inside timer_reduce().
Note, that this does not protect against concurrent invocations of any of
the timer functions.
As an example, the expect_rx_by timeout above, which terminates a call if
we don't get a packet from the server within a certain time window, would
be set something like this:
unsigned long now = jiffies;
unsigned long expect_rx_by = now + packet_receive_timeout;
WRITE_ONCE(call->expect_rx_by, expect_rx_by);
timer_reduce(&call->timer, expect_rx_by);
The timer service code (which might, say, be in a work function) would then
check all the timeouts to see which, if any, had triggered, deal with
those:
t = READ_ONCE(call->ack_at);
if (time_after_eq(now, t)) {
cmpxchg(&call->ack_at, t, now + MAX_JIFFY_OFFSET);
set_bit(RXRPC_CALL_EV_ACK, &call->events);
}
and then restart the timer if necessary by finding the soonest timeout that
hasn't yet passed and then calling timer_reduce().
The disadvantage of doing things this way rather than comparing the timers
each time and calling mod_timer() is that you *will* take timer events
unless you can finish what you're doing and delete the timer in time.
The advantage of doing things this way is that you don't need to use a lock
to work out when the next timer should be set, other than the timer's own
lock - which you might not have to take.
[ tglx: Fixed weird formatting and adopted it to pending changes ]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: keyrings@vger.kernel.org
Cc: linux-afs@lists.infradead.org
Link: https://lkml.kernel.org/r/151023090769.23050.1801643667223880753.stgit@warthog.procyon.org.uk
__getnstimeofday() is a rather odd interface, with a number of quirks:
- The caller may come from NMI context, but the implementation is not NMI safe,
one way to get there from NMI is
NMI handler:
something bad
panic()
kmsg_dump()
pstore_dump()
pstore_record_init()
__getnstimeofday()
- The calling conventions are different from any other timekeeping functions,
to deal with returning an error code during suspended timekeeping.
Address the above issues by using a completely different method to get the
time: ktime_get_real_fast_ns() is NMI safe and has a reasonable behavior
when timekeeping is suspended: it returns the time at which it got
suspended. As Thomas Gleixner explained, this is safe, as
ktime_get_real_fast_ns() does not call into the clocksource driver that
might be suspended.
The result can easily be transformed into a timespec structure. Since
ktime_get_real_fast_ns() was not exported to modules, add the export.
The pstore behavior for the suspended case changes slightly, as it now
stores the timestamp at which timekeeping was suspended instead of storing
a zero timestamp.
This change is not addressing y2038-safety, that's subject to a more
complex follow up patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Colin Cross <ccross@android.com>
Link: https://lkml.kernel.org/r/20171110152530.1926955-1-arnd@arndb.de
The llist_for_each_entry() loop in irq_work_run_list() is unsafe because
once the works PENDING bit is cleared it can be requeued on another CPU.
Use llist_for_each_entry_safe() instead.
Fixes: 16c0890dc6 ("irq/work: Don't reinvent the wheel but use existing llist API")
Reported-by:Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Link: http://lkml.kernel.org/r/151027307351.14762.4611888896020658384@mail.alporthouse.com
Ricardo Neri