So far lower could not be a meta inode. So whenever it was time to copy up
data of a meta inode, we could copy it up from top most lower dentry.
But now lower itself can be a metacopy inode. That means data copy up
needs to take place from a data inode in metacopy inode chain. Find lower
data inode in the chain and use that for data copy up.
Introduced a helper called ovl_path_lowerdata() to find the lower data
inode chain.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch modifies ovl_lookup() and friends to lookup metacopy dentries.
It also allows for presence of metacopy dentries in lower layer.
During lookup, check for presence of OVL_XATTR_METACOPY and if not present,
set OVL_UPPERDATA bit in flags.
We don't support metacopy feature with nfs_export. So in nfs_export code,
we set OVL_UPPERDATA flag set unconditionally if upper inode exists.
Do not follow metacopy origin if we find a metacopy only inode and metacopy
feature is not enabled for that mount. Like redirect, this can have
security implications where an attacker could hand craft upper and try to
gain access to file on lower which it should not have to begin with.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we use goto out_nomem which assumes error code is -ENOMEM. But
there are other errors returned like -ESTALE as well. So instead of
out_nomem, use out_err which will do ERR_PTR(err). That way one can put
error code in err and jump to out_err.
This just code reorganization and no change of functionality.
I am about to add more code and this organization helps laying more code
and error paths on top of it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we will have the capability to have upper inodes which might be only
metadata copy up and data is still on lower inode. So add a new xattr
OVL_XATTR_METACOPY to distinguish between two cases.
Presence of OVL_XATTR_METACOPY reflects that file has been copied up
metadata only and and data will be copied up later from lower origin. So
this xattr is set when a metadata copy takes place and cleared when data
copy takes place.
We also use a bit in ovl_inode->flags to cache OVL_UPPERDATA which reflects
whether ovl inode has data or not (as opposed to metadata only copy up).
If a file is copied up metadata only and later when same file is opened for
WRITE, then data copy up takes place. We copy up data, remove METACOPY
xattr and then set the UPPERDATA flag in ovl_inode->flags. While all these
operations happen with oi->lock held, read side of oi->flags can be
lockless. That is another thread on another cpu can check if UPPERDATA
flag is set or not.
So this gives us an ordering requirement w.r.t UPPERDATA flag. That is, if
another cpu sees UPPERDATA flag set, then it should be guaranteed that
effects of data copy up and remove xattr operations are also visible.
For example.
CPU1 CPU2
ovl_open() acquire(oi->lock)
ovl_open_maybe_copy_up() ovl_copy_up_data()
open_open_need_copy_up() vfs_removexattr()
ovl_already_copied_up()
ovl_dentry_needs_data_copy_up() ovl_set_flag(OVL_UPPERDATA)
ovl_test_flag(OVL_UPPERDATA) release(oi->lock)
Say CPU2 is copying up data and in the end sets UPPERDATA flag. But if
CPU1 perceives the effects of setting UPPERDATA flag but not the effects of
preceding operations (ex. upper that is not fully copied up), it will be a
problem.
Hence this patch introduces smp_wmb() on setting UPPERDATA flag operation
and smp_rmb() on UPPERDATA flag test operation.
May be some other lock or barrier is already covering it. But I am not sure
what that is and is it obvious enough that we will not break it in future.
So hence trying to be safe here and introducing barriers explicitly for
UPPERDATA flag/bit.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are couple of places where we need to know if file is already copied
up (in lockless manner). Right now its open coded and there are only two
conditions to check. Soon this patch series will introduce another
condition to check and Amir wants to introduce one more. So introduce a
helper instead to check this so that code is easier to read.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If it makes sense to copy up only metadata during copy up, do it. This is
done for regular files which are not opened for WRITE.
Right now ->metacopy is set to 0 always. Last patch in the series will
remove the hard coded statement and enable metacopy feature.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Just a little re-ordering of code. This helps with next patch where after
copying up metadata, we skip data copying step, if needed.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
By default metadata only copy up is disabled. Provide a mount option so
that users can choose one way or other.
Also provide a kernel config and module option to enable/disable metacopy
feature.
metacopy feature requires redirect_dir=on when upper is present.
Otherwise, it requires redirect_dir=follow atleast.
As of now, metacopy does not work with nfs_export=on. So if both
metacopy=on and nfs_export=on then nfs_export is disabled.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now two copy up helpers are in inode.c. Amir suggested it might be
better to move these to copy_up.c.
There will one more related function which will come in later patch.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode->redirect is an inode property and should be initialized in
ovl_get_inode() only when we are adding a new inode to cache. If inode is
already in cache, it is already initialized and we should not be touching
ovl_inode->redirect field.
As of now this is not a problem as redirects are used only for directories
which don't share inode. But soon I want to use redirects for regular
files also and there it can become an issue.
Hence, move ->redirect initialization in ovl_get_inode().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This was provided for debugging the ro/rw inconsistecy. The inconsitency
is now gone so this option is obsolete.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Opening regular files on overlayfs is now handled via ovl_open(). Remove
the now unused "open_flags" argument from d_op->d_real() and the d_real()
helper.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This partially reverts commit c568d68341.
Overlayfs files will now automatically get the correct locks, no need to
hack overlay support in VFS.
It is a partial revert, because it leaves the locks_inode() calls in place
and defines locks_inode() to file_inode(). We could revert those as well,
but it would be unnecessary code churn and it makes sense to document that
we are getting the inode for locking purposes.
Don't revert MS_NOREMOTELOCK yet since that has been part of the userspace
API for some time (though not in a useful way). Will try to remove
internal flags later when the dust around the new mount API settles.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Implement stacked fiemap().
Need to split inode operations for regular file (which has fiemap) and
special file (which doesn't have fiemap).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the common case we can just use the real file cached in
file->private_data. There are two exceptions:
1) File has been copied up since open: in this unlikely corner case just
use a throwaway real file for the operation. If ever this becomes a
perfomance problem (very unlikely, since overlayfs has been doing most fine
without correctly handling this case at all), then we can deal with that by
updating the cached real file.
2) File's f_flags have changed since open: no need to reopen the cached
real file, we can just change the flags there as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implement file operations on a regular overlay file. The underlying file
is opened separately and cached in ->private_data.
It might be worth making an exception for such files when accounting in
nr_file to confirm to userspace expectations. We are only adding a small
overhead (248bytes for the struct file) since the real inode and dentry are
pinned by overlayfs anyway.
This patch doesn't have any effect, since the vfs will use d_real() to find
the real underlying file to open. The patch at the end of the series will
actually enable this functionality.
AV: make it use open_with_fake_path(), don't mess with override_creds
SzM: still need to mess with override_creds() until no fs uses
current_cred() in their open method.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copy i_size of the underlying inode to the overlay inode in ovl_copyattr().
This is in preparation for stacking I/O operations on overlay files.
This patch shouldn't have any observable effect.
Remove stale comment from ovl_setattr() [spotted by Vivek Goyal].
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 31c3a70695.
Re-add functionality dealing with i_writecount on truncate to overlayfs.
This patch shouldn't have any observable effects, since we just re-assert
the writecout that vfs_truncate() already got for us.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On inode creation copy certain inode flags from the underlying real inode
to the overlay inode.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copy up mtime and ctime to overlay inode after times in real object are
modified. Be careful not to dirty cachelines when not necessary.
This is in preparation for moving overlay functionality out of the VFS.
This patch shouldn't have any observable effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Only upper dir can be impure, but if we are in the middle of
iterating a lower real dir, dir could be copied up and marked
impure. We only want the impure cache if we started iterating
a real upper dir to begin with.
Aditya Kali reported that the following reproducer hits the
WARN_ON(!cache->refcount) in ovl_get_cache():
docker run --rm drupal:8.5.4-fpm-alpine \
sh -c 'cd /var/www/html/vendor/symfony && \
chown -R www-data:www-data . && ls -l .'
Reported-by: Aditya Kali <adityakali@google.com>
Tested-by: Aditya Kali <adityakali@google.com>
Fixes: 4edb83bb10 ('ovl: constant d_ino for non-merge dirs')
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbInZAAAoJEGCrR//JCVInReoQAIlVIIMt5ZX6wmaKbrjy9Itf
MfgbFihQ/djLnuSPVQ3nztcxF0d66BKHZ9puVjz6+mIHqfDvJTRwZs9nU+sOF/T1
g78fRkM1cxq6ZCkGYAbzyjyo5aC4PnSMP/NQLmwqvi0MXqqrbDoq5ZdP9DHJw39h
L9lD8FM/P7T29Fgp9tq/pT5l9X8VU8+s5KQG1uhB5hii4VL6pD6JyLElDita7rg+
Z7/V7jkxIGEUWF7vGaiR1QTFzEtpUA/exDf9cnsf51OGtK/LJfQ0oiZPPuq3oA/E
LSbt8YQQObc+dvfnGxwgxEg1k5WP5ekj/Wdibv/+rQKgGyLOTz6Q4xK6r8F2ahxs
nyZQBdXqHhJYyKr1H1reUH3mrSgQbE5U5R1i3My0xV2dSn+vtK5vgF21v2Ku3A1G
wJratdtF/kVBzSEQUhsYTw14Un+xhBLRWzcq0cELonqxaKvRQK9r92KHLIWNE7/v
c0TmhFbkZA+zR8HdsaL3iYf1+0W/eYy8PcvepyldKNeW2pVk3CyvdTfY2Z87G2XK
tIkK+BUWbG3drEGG3hxZ3757Ln3a9qWyC5ruD3mBVkuug/wekbI8PykYJS7Mx4s/
WNXl0dAL0Eeu1M8uEJejRAe1Q3eXoMWZbvCYZc+wAm92pATfHVcKwPOh8P7NHlfy
A3HkjIBrKW5AgQDxfgvm
=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Currently, there is a small window where ovl_obtain_alias() can
race with ovl_instantiate() and create two different overlay inodes
with the same underlying real non-dir non-hardlink inode.
The race requires an adversary to guess the file handle of the
yet to be created upper inode and decode the guessed file handle
after ovl_creat_real(), but before ovl_instantiate().
This race does not affect overlay directory inodes, because those
are decoded via ovl_lookup_real() and not with ovl_obtain_alias().
This patch fixes the race, by using inode_insert5() to add a newly
created inode to cache.
If the newly created inode apears to already exist in cache (hashed
by the same real upper inode), we instantiate the dentry with the old
inode and drop the new inode, instead of silently not hashing the new
inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_get_inode() right now has 5 parameters. Soon this patch series will
add 2 more and suddenly argument list starts looking too long.
Hence pass arguments to ovl_get_inode() in a structure and it looks
little cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
vfs_mkdir() may succeed and leave the dentry passed to it unhashed and
negative. ovl_create_real() is the last caller breaking when that
happens.
[amir: split re-factoring of ovl_create_temp() to prep patch
add comment about unhashed dir after mkdir
add pr_warn() if mkdir succeeds and lookup fails]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Also used ovl_create_temp() in ovl_create_index() instead of calling
ovl_do_mkdir() directly, so now all callers of ovl_do_mkdir() are routed
through ovl_create_real(), which paves the way for Al's fix for non-hashed
result from vfs_mkdir().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Al Viro suggested to simplify callers of ovl_create_real() by
returning the created dentry (or ERR_PTR) from ovl_create_real().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs should cope with online changes to underlying layer
without crashing the kernel, which is what xfstest overlay/019
checks.
This test may sometimes trigger WARN_ON() in ovl_create_or_link()
when linking an overlay inode that has been changed on underlying
layer.
Remove those WARN_ON() to prevent the stress test from failing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With mount option "xino=on", mounter declares that there are enough
free high bits in underlying fs to hold the layer fsid.
If overlayfs does encounter underlying inodes using the high xino
bits reserved for layer fsid, a warning will be emitted and the original
inode number will be used.
The mount option name "xino" goes after a similar meaning mount option
of aufs, but in overlayfs case, the mapping is stateless.
An example for a use case of "xino=on" is when upper/lower is on an xfs
filesystem. xfs uses 64bit inode numbers, but it currently never uses the
upper 8bit for inode numbers exposed via stat(2) and that is not likely to
change in the future without user opting-in for a new xfs feature. The
actual number of unused upper bit is much larger and determined by the xfs
filesystem geometry (64 - agno_log - agblklog - inopblog). That means
that for all practical purpose, there are enough unused bits in xfs
inode numbers for more than OVL_MAX_STACK unique fsid's.
Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode
numbers are allocated sequentially since boot, so they will practially
never use the high inode number bits.
For compatibility with applications that expect 32bit inodes, the feature
can be disabled with "xino=off". The option "xino=auto" automatically
detects underlying filesystem that use 32bit inodes and enables the
feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of
the same name, determine if the default mode for overlayfs mount is
"xino=auto" or "xino=off".
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, relax non-samefs constraint for consistent d_ino and always
iterate non-merge dir using ovl_fill_real() actor so we can remap lower
inode numbers to unique lower fs range.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, set i_ino value to the same value as st_ino for nfsd
readdirplus validator.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On 64bit systems, when overlay layers are not all on the same fs, but
all inode numbers of underlying fs are not using the high bits, use the
high bits to partition the overlay st_ino address space. The high bits
hold the fsid (upper fsid is 0). This way overlay inode numbers are unique
and all inodes use overlay st_dev. Inode numbers are also persistent
for a given layer configuration.
Currently, our only indication for available high ino bits is from a
filesystem that supports file handles and uses the default encode_fh()
operation, which encodes a 32bit inode number.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
upper fs.
Every unique lower fs is assigned an fsid > 0 and the number of
unique lower fs are stored in ofs->numlowerfs.
The assigned fsid is stored in the lower layer struct and will be
used also for inode number multiplexing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Certain properties in ovl_lookup_data should be set only for the last
element of the path. IOW, if we are calling ovl_lookup_single() for an
absolute redirect, then d->is_dir and d->opaque do not make much sense
for intermediate path elements. Instead set them only if dentry being
lookup is last path element.
As of now we do not seem to be making use of d->opaque if it is set for
a path/dentry in lower. But just define the semantics so that future code
can make use of this assumption.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If we are looking in last layer, then there should not be any need to
process redirect. redirect information is used only for lookup in next
lower layer and there is no more lower layer to look into. So no need
to process redirects.
IOW, ignore redirects on lowest layer.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When decoding a lower file handle, we need to check if lower file was
copied up and indexed and if it has a whiteout index, we need to check
if this is an unlinked but open non-dir before returning -ESTALE.
To find out if this is an unlinked but open non-dir we need to lookup
an overlay inode in inode cache by lower inode and that requires decoding
the lower file handle before looking in inode cache.
Before this change, if the lower inode turned out to be a directory, we
may have paid an expensive cost to reconnect that lower directory for
nothing.
After this change, we start by decoding a disconnected lower dentry and
using the lower inode for looking up an overlay inode in inode cache.
If we find overlay inode and dentry in cache, we avoid the index lookup
overhead. If we don't find an overlay inode and dentry in cache, then we
only need to decode a connected lower dentry in case the lower dentry is
a non-indexed directory.
The xfstests group overlay/exportfs tests decoding overlayfs file
handles after drop_caches with different states of the file at encode
and decode time. Overall the tests in the group call ovl_lower_fh_to_d()
89 times to decode a lower file handle.
Before this change, the tests called ovl_get_index_fh() 75 times and
reconnect_one() 61 times.
After this change, the tests call ovl_get_index_fh() 70 times and
reconnect_one() 59 times. The 2 cases where reconnect_one() was avoided
are cases where a non-upper directory file handle was encoded, then the
directory removed and then file handle was decoded.
To demonstrate the affect on decoding file handles with hot inode/dentry
cache, the drop_caches call in the tests was disabled. Without
drop_caches, there are no reconnect_one() calls at all before or after
the change. Before the change, there are 75 calls to ovl_get_index_fh(),
exactly as the case with drop_caches. After the change, there are only
10 calls to ovl_get_index_fh().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On lookup of non directory, we try to decode the origin file handle
stored in upper inode. The origin file handle is supposed to be decoded
to a disconnected non-dir dentry, which is fine, because we only need
the lower inode of a copy up origin.
However, if the origin file handle somehow turns out to be a directory
we pay the expensive cost of reconnecting the directory dentry, only to
get a mismatch file type and drop the dentry.
Optimize this case by explicitly opting out of reconnecting the dentry.
Opting-out of reconnect is done by passing a NULL acceptable callback
to exportfs_decode_fh().
While the case described above is a strange corner case that does not
really need to be optimized, the API added for this optimization will
be used by a following patch to optimize a more common case of decoding
an overlayfs file handle.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename ovl_encode_fh() to ovl_encode_real_fh() to differentiate from the
exportfs function ovl_encode_inode_fh() and change the latter to
ovl_encode_fh() to match the exportfs method name.
Rename ovl_decode_fh() to ovl_decode_real_fh() for consistency.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For broken hardlinks, we do not return lower st_ino, so we should
also not return lower pseudo st_dev.
Fixes: a0c5ad307a ("ovl: relax same fs constraint for constant st_ino")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.
Here is an example to demonstrate the issue. Say you have following setup.
upper: /redirect (redirect=/a/b/c)
lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo
Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.
Following is a reproducer.
Watch me make foo disappear:
$ mkdir lower middle upper work work2 merged
$ mkdir lower/origin
$ touch lower/origin/foo
$ mount -t overlay none merged/ \
-olowerdir=lower,upperdir=middle,workdir=work2
$ mkdir merged/pure
$ mv merged/origin merged/pure/redirect
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
$ mv merged/pure/redirect merged/redirect
Now you see foo inside a twice redirected merged dir:
$ ls merged/redirect
foo
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
After mount cycle you don't see foo inside the same dir:
$ ls merged/redirect
During middle layer lookup, the opaqueness of middle/pure is left in
the lookup state and then middle/pure/redirect is wrongly treated as
opaque.
Fixes: 02b69b284c ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
d->last signifies that this is the last layer we are looking into and there
is no more. And that means this allows for some optimzation opportunities
during lookup. For example, in ovl_lookup_single() we don't have to check
for opaque xattr of a directory is this is the last layer we are looking
into (d->last = true).
But knowing for sure whether we are looking into last layer can be very
tricky. If redirects are not enabled, then we can look at poe->numlower and
figure out if the lookup we are about to is last layer or not. But if
redircts are enabled then it is possible poe->numlower suggests that we are
looking in last layer, but there is an absolute redirect present in found
element and that redirects us to a layer in root and that means lookup will
continue in lower layers further.
For example, consider following.
/upperdir/pure (opaque=y)
/upperdir/pure/foo (opaque=y,redirect=/bar)
/lowerdir/bar
In this case pure is "pure upper". When we look for "foo", that time
poe->numlower=0. But that alone does not mean that we will not search for a
merge candidate in /lowerdir. Absolute redirect changes that.
IOW, d->last should not be set just based on poe->numlower if redirects are
enabled. That can lead to setting d->last while it should not have and that
means we will not check for opaque xattr while we should have.
So do this.
- If redirects are not enabled, then continue to rely on poe->numlower
information to determine if it is last layer or not.
- If redirects are enabled, then set d->last = true only if this is the
last layer in root ovl_entry (roe).
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 02b69b284c ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.
Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.
When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 8383f17488 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add some hints about overlayfs kernel config options.
Enabling NFS export by default is especially recommended against, as it
incurs a performance penalty even if the filesystem is not actually
exported.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
redirect_dir=nofollow should not follow a redirect. But in a specific
configuration it can still follow it. For example try this.
$ mkdir -p lower0 lower1/foo upper work merged
$ touch lower1/foo/lower-file.txt
$ setfattr -n "trusted.overlay.opaque" -v "y" lower1/foo
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=on none merged
$ cd merged
$ mv foo foo-renamed
$ umount merged
# mount again. This time with redirect_dir=nofollow
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=nofollow none merged
$ ls merged/foo-renamed/
# This lists lower-file.txt, while it should not have.
Basically, we are doing redirect check after we check for d.stop. And
if this is not last lower, and we find an opaque lower, d.stop will be
set.
ovl_lookup_single()
if (!d->last && ovl_is_opaquedir(this)) {
d->stop = d->opaque = true;
goto out;
}
To fix this, first check redirect is allowed. And after that check if
d.stop has been set or not.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: 438c84c2f0 ("ovl: don't follow redirects if redirect_dir=off")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fs/overlayfs/export.c:459:10-16: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 4b91c30a5a ("ovl: lookup connected ancestor of dir in inode cache")
CC: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This change relaxes copy up on encode of merge dir with lower layer > 1
and handles the case of encoding a merge dir with lower layer 1, where an
ancestor is a non-indexed merge dir. In that case, decode of the lower
file handle will not have been possible if the non-indexed ancestor is
redirected before or after encode.
Before encoding a non-upper directory file handle from real layer N, we
need to check if it will be possible to reconnect an overlay dentry from
the real lower decoded dentry. This is done by following the overlay
ancestry up to a "layer N connected" ancestor and verifying that all
parents along the way are "layer N connectable". If an ancestor that is
NOT "layer N connectable" is found, we need to copy up an ancestor, which
is "layer N connectable", thus making that ancestor "layer N connected".
For example:
layer 1: /a
layer 2: /a/b/c
The overlay dentry /a is NOT "layer 2 connectable", because if dir /a is
copied up and renamed, upper dir /a will be indexed by lower dir /a from
layer 1. The dir /a from layer 2 will never be indexed, so the algorithm
in ovl_lookup_real_ancestor() (*) will not be able to lookup a connected
overlay dentry from the connected lower dentry /a/b/c.
To avoid this problem on decode time, we need to copy up an ancestor of
/a/b/c, which is "layer 2 connectable", on encode time. That ancestor is
/a/b. After copy up (and index) of /a/b, it will become "layer 2 connected"
and when the time comes to decode the file handle from lower dentry /a/b/c,
ovl_lookup_real_ancestor() will find the indexed ancestor /a/b and decoding
a connected overlay dentry will be accomplished.
(*) the algorithm in ovl_lookup_real_ancestor() can be improved to lookup
an entry /a in the lower layers above layer N and find the indexed dir /a
from layer 1. If that improvement is made, then the check for "layer N
connected" will need to verify there are no redirects in lower layers above
layer N. In the example above, /a will be "layer 2 connectable". However,
if layer 2 dir /a is a target of a layer 1 redirect, then /a will NOT be
"layer 2 connectable":
layer 1: /A (redirect = /a)
layer 2: /a/b/c
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 31747eda41 ("ovl: hash directory inodes for fsnotify")
fixed an issue of inotify watch on directory that stops getting
events after dropping dentry caches.
A similar issue exists for non-dir non-upper files, for example:
$ mkdir -p lower upper work merged
$ touch lower/foo
$ mount -t overlay -o
lowerdir=lower,workdir=work,upperdir=upper none merged
$ inotifywait merged/foo &
$ echo 2 > /proc/sys/vm/drop_caches
$ cat merged/foo
inotifywait doesn't get the OPEN event, because ovl_lookup() called
from 'cat' allocates a new overlay inode and does not reuse the
watched inode.
Fix this by hashing non-dir overlay inodes by lower real inode in
the following cases that were not hashed before this change:
- A non-upper overlay mount
- A lower non-hardlink when index=off
A helper ovl_hash_bylower() was added to put all the logic and
documentation about which real inode an overlay inode is hashed by
into one place.
The issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Another fix for an issue reported by 0-day robot.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 8ed5eec9d6 ("ovl: encode pure upper file handles")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A re-factoring patch in NFS export series has passed the wrong argument
to ovl_get_inode() causing a regression in the very recent fix to
fsnotify of overlay merge dir.
The regression has caused merge directory inodes to be hashed by upper
instead of lower real inode, when NFS export and directory indexing is
disabled. That caused an inotify watch to become obsolete after directory
copy up and drop caches.
LTP test inotify07 was improved to catch this regression.
The regression also caused multiple redirect dirs to same origin not to
be detected on lookup with NFS export disabled. An xfstest was added to
cover this case.
Fixes: 0aceb53e73 ("ovl: do not pass overlay dentry to ovl_get_inode()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that NFS export operations are implemented, enable overlayfs NFS
export support if the "nfs_export" feature is enabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_lookup_real() in lower layer walks back lower parents to find the
topmost indexed parent. If an indexed ancestor is found before reaching
lower layer root, ovl_lookup_real() is called recursively with upper
layer to walk back from indexed upper to the topmost connected/hashed
upper parent (or up to root).
ovl_lookup_real() in upper layer then walks forward to connect the topmost
upper overlay dir dentry and ovl_lookup_real() in lower layer continues to
walk forward to connect the decoded lower overlay dir dentry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a dir file handle requires walking backward up to layer root and
for lower dir also checking the index to see if any of the parents have
been copied up.
Lookup overlay ancestor dentry in inode/dentry cache by decoded real
parents to shortcut looking up all the way back to layer root.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Non-indexed upper dirs are encoded as upper file handles. When NFS export
is enabled, hash non-indexed directory inodes by upper inode, so we can
find them in inode cache using the decoded upper inode.
When NFS export is disabled, directories are not indexed on copy up, so
hash non-indexed directory inodes by origin inode, the same hash key
that is used before copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Similar to decoding a pure upper dir file handle, decoding a pure lower
dir file handle is implemented by looking an overlay dentry of the same
path as the pure lower path and verifying that the overlay dentry's
real lower matches the decoded real lower file handle.
Unlike the case of upper dir file handle, the lookup of overlay path by
lower real path can fail or find a mismatched overlay dentry if any of
the lower parents have been copied up and renamed. To address this case
we will need to check if any of the lower parents are indexed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an indexed dir file handle is done by looking up the file handle
in index dir by name and then decoding the upper dir from the index origin
file handle. The decoded upper path is used to lookup an overlay dentry of
the same path.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Lookup overlay inode in cache by origin inode, so we can decode a file
handle of an open file even if the index has a whiteout index entry to
mark this overlay inode was unlinked.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an indexed non-dir file handle is similar to decoding a lower
non-dir file handle, but additionally, we lookup the file handle in index
dir by name to find the real upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a lower non-dir file handle is done by decoding the lower dentry
from underlying lower fs, finding or allocating an overlay inode that is
hashed by the real lower inode and instantiating an overlay dentry with
that inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For indexed or lower non-dir, encode a non-connectable lower file handle
from origin inode. For indexed or lower dir, when ofs->numlower == 1,
encode a lower file handle from lower dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a merge dir, whose origin's parent is under a redirected
lower dir is not always possible. As a simple aproximation, we do
not encode lower dir file handles when overlay has multiple lower
layers and origin is below the topmost lower layer.
We should later relax this condition and copy up only the parent
that is under a redirected lower.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We only need to encode origin if there is a chance that the same object was
encoded pre copy up and then we need to stay consistent with the same
encoding also after copy up.
In case a non-pure upper is not indexed, then it was copied up before NFS
export support was enabled. In that case, we don't need to worry about
staying consistent with pre copy up encoding and we encode an upper file
handle.
This mitigates the problem that with no index, we cannot find an upper
inode from origin inode, so we cannot decode a non-indexed upper from
origin file handle.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Until this change, we decoded upper file handles by instantiating an
overlay dentry from the real upper dentry. This is sufficient to handle
pure upper files, but insufficient to handle merge/impure dirs.
To that end, if decoded real upper dir is connected and hashed, we
lookup an overlay dentry with the same path as the real upper dir.
If decoded real upper is non-dir, we instantiate a disconnected overlay
dentry as before this change.
Because ovl_fh_to_dentry() returns a connected overlay dir dentry,
exportfs never needs to call get_parent() and get_name() to reconnect an
upper overlay dir. Because connectable non-dir file handles are not
supported, exportfs will not be able to use fh_to_parent() and get_name()
methods to reconnect a disconnected non-dir to its parent. Therefore, the
methods get_parent() and get_name() are implemented just to print out a
sanity warning and the method fh_to_parent() is implemented to warn the
user that using the 'subtree_check' exportfs option is not supported.
An alternative approach could have been to implement instantiating of
an overlay directory inode from origin/index and implement get_parent()
and get_name() by calling into underlying fs operations and them
instantiating the overlay parent dir.
The reasons for not choosing the get_parent() approach were:
- Obtaining a disconnected overlay dir dentry would requires a
delicate re-factoring of ovl_lookup() to get a dentry with overlay
parent info. It was preferred to avoid doing that re-factoring unless
it was proven worthy.
- Going down the path of disconnected dir would mean that the (non
trivial) code path of d_splice_alias() could be traveled and that
meant writing more tests and introduces race cases that are very hard
to hit on purpose. Taking the path of connecting overlay dentry by
forward lookup is therefore the safe and boring way to avoid surprises.
The culprits of the chosen "connected overlay dentry" approach:
- We need to take special care to rename of ancestors while connecting
the overlay dentry by real dentry path. These subtleties are usually
handled by generic exportfs and VFS code.
- In a hypothetical workload, we could end up in a loop trying to connect,
interrupted by rename and restarting connect forever.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an upper file handle is done by decoding the upper dentry from
underlying upper fs, finding or allocating an overlay inode that is
hashed by the real upper inode and instantiating an overlay dentry with
that inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Encode overlay file handles as struct ovl_fh containing the file handle
encoding of the real upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as
bit flags.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In this case, we will copy up lower inode to index dir without
linking it to upper dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed for using ovl_get_inode() for decoding file handles
for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The helper is needed to lookup an index by file handle for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Orphan index entries are non-dir index entries whose union nlink count
dropped to zero. With index=on, orphan index entries are removed on
mount. With NFS export feature enabled, orphan index entries are replaced
with white out index entries to block future open by handle from opening
the lower file.
When dir index has a stale 'upper' xattr, we assume that the upper dir
was removed and we treat the dir index as orphan entry that needs to be
whited out or removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export feature enabled, when overlay inode nlink drops to
zero, instead of removing the index entry, replace it with a whiteout
index entry.
This is needed for NFS export in order to prevent future open by handle
from opening the lower file directly.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When non-dir index union nlink drops to zero the non-dir index
is cleaned. Do the same for directory type index entries when
union directory is removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the NFS export feature enabled, all dirs are indexed on copy up.
Non-dir files are copied up directly to indexdir and then hardlinked
to upper dir.
Directories are copied up to indexdir, then an index entry is created
in indexdir with 'upper' xattr pointing to the copied up dir and then
the copied up dir is moved to upper dir.
Directory index is also used for consistency verification, like
detecting multiple redirected dirs to the same lower dir on lookup.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the NFS export feature enabled, all non-dir are indexed on copy up.
The copy up origin inode of an indexed non-dir can be used as a unique
identifier of the overlay object.
The full index is also used for consistency verfication, like detecting
multiple non-hardlink uppers with the same 'origin' on lookup.
Directory index on copy up will be implemented by following patch.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The helper determines which lower file needs to be indexed
on copy up and before nlink changes.
For index=on, the helper evaluates to true for lower hardlinks.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A previous failed attempt to create or whiteout a directory index may
leave index entries named '#%x' in the index dir. Cleanup those temp
entries on mount instead of failing the mount.
In the future, we may drop 'work' dir and use 'index' dir instead.
This change is enough for cleaning up copy up leftovers 'from the future',
but it is not enough for cleaning up rmdir leftovers 'from the future'
(i.e. temp dir containing whiteouts).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Directory index entries should have 'upper' xattr pointing to the real
upper dir. Verifying that the upper dir file handle is not stale is
expensive, so only verify stale directory index entries on mount if
NFS export feature is enabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Vivek Goyal