- Patrice Chotard contributed a new configuration debugfs interface
and reintroduced fine-grained locking into the core: instead of
having a "big pinctrl lock" we have a per-controller lock and
specialized locks for the global controller and pinctrl handle
lists.
- Haoijan Zhuang deleted all the PXA and MMP2 pinctrl drivers and
replaced them with pinctrl-single (which is also used by other SoCs)
so we are gaining consolidation. The platform particulars now come
in through the device tree.
- Haoijan also added support for generic pin config into the
pinctrl-single driver which is another big consolidation win.
- Finally also GPIO ranges are now supported by the pinctrl-single
driver.
- Tomasz Figa contributed a new Samsung S3C pinctrl driver, bringing
more of the older Samsung platforms under the pinctrl umbrella and
out of arch/arm.
- Maxime Ripard contributed new Allwinner A10/A13 drivers.
- Sachin Kamat, Wei Yongjun and Axel Lin did a lot of cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=CyMU
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl update from Linus Walleij:
"These are the pinctrl changes for v3.10:
- Patrice Chotard contributed a new configuration debugfs interface
and reintroduced fine-grained locking into the core: instead of
having a "big pinctrl lock" we have a per-controller lock and
specialized locks for the global controller and pinctrl handle
lists.
- Haoijan Zhuang deleted all the PXA and MMP2 pinctrl drivers and
replaced them with pinctrl-single (which is also used by other
SoCs) so we are gaining consolidation. The platform particulars
now come in through the device tree.
- Haoijan also added support for generic pin config into the
pinctrl-single driver which is another big consolidation win.
- Finally also GPIO ranges are now supported by the pinctrl-single
driver.
- Tomasz Figa contributed a new Samsung S3C pinctrl driver, bringing
more of the older Samsung platforms under the pinctrl umbrella and
out of arch/arm.
- Maxime Ripard contributed new Allwinner A10/A13 drivers.
- Sachin Kamat, Wei Yongjun and Axel Lin did a lot of cleanups."
* tag 'pinctrl-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (66 commits)
pinctrl: move subsystem mutex to pinctrl_dev struct
pinctrl/pinconfig: fix misplaced goto
pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter
pinctrl/pinconfig: add debug interface
pinctrl: abx500: fix issue when no pdata
pinctrl: pinctrl-single: add missing double quote
pinctrl: sunxi: Rename wemac functions to emac
pinctrl: exynos5440: add gpio interrupt support
pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes
pinctrl: ab8505: Staticize some symbols
pinctrl: ab8540: Staticize some symbols
pinctrl: ab9540: Staticize some symbols
pinctrl: ab8500: Staticize some symbols
pinctrl: abx500: Staticize some symbols
pinctrl: Add pinctrl-s3c64xx driver
pinctrl: samsung: Handle banks with two configuration registers
pinctrl: samsung: Remove hardcoded register offsets
pinctrl: samsung: Split pin bank description into two structures
pinctrl: samsung: Include pinctrl-exynos driver data conditionally
pinctrl: samsung: Protect bank registers with a spinlock
...
* use vm_iomap_memory() in various fb drivers to map the fb memory to userspace
* Cleanups for the videomode and display_timing features
* Updates to vt8500, wm8505 and auo-k190x fb drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=L5rT
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-3.10' of git://gitorious.org/linux-omap-dss2/linux
Pull fbdev updates from Tomi Valkeinen:
- use vm_iomap_memory() in various fb drivers to map the fb memory to
userspace
- Cleanups for the videomode and display_timing features
- Updates to vt8500, wm8505 and auo-k190x fb drivers
* tag 'fbdev-for-3.10' of git://gitorious.org/linux-omap-dss2/linux: (36 commits)
fbdev: fix check for fb_mmap's mmio availability
fbdev: improve fb_mmap bounds checks
fbdev/ps3fb: use vm_iomap_memory()
fbdev/sgivwfb: use vm_iomap_memory()
fbdev/vermillion: use vm_iomap_memory()
fbdev/sa1100fb: use vm_iomap_memory()
fbdev/fb-puv3: use vm_iomap_memory()
fbdev/controlfb: use vm_iomap_memory()
fbdev/omapfb: use vm_iomap_memory()
video: vt8500: fix Kconfig for videomode
video/s3c: move platform_data out of arch/arm
video/exynos: remove unnecessary header inclusions
drivers/video: fsl-diu-fb: add hardware cursor support
drivers: video: use module_platform_driver_probe()
ARM: OMAP: remove "config FB_OMAP_CONSISTENT_DMA_SIZE"
video: wm8505fb: Convert to devm_ioremap_resource()
AUO-K190x: Add resolutions for portrait displays
AUO-K190x: add framebuffer rotation support
AUO-K190x: add a 16bit truecolor mode
AUO-K190x: make color handling more flexible
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Y2HM
-----END PGP SIGNATURE-----
Merge tag 'please-pull-misc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 fixes from Tony Luck:
"Bundle of miscellaneous ia64 fixes for 3.10 merge window."
* tag 'please-pull-misc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
Add size restriction to the kdump documentation
Fix example error_injection_tool
Fix build error for numa_clear_node() under IA64
Fix initialization of CMCI/CMCP interrupts
Change "select DMAR" to "select INTEL_IOMMU"
Wrong asm register contraints in the kvm implementation
Wrong asm register contraints in the futex implementation
Remove cast for kmalloc return value
Fix kexec oops when iosapic was removed
iosapic: fix a minor typo in comments
Add WB/UC check for early_ioremap
Fix broken fsys_getppid()
tiocx: check retval from bus_register()
Pull s390 update from Martin Schwidefsky:
"This is the first batch of s390 patches for the 3.10 merge window.
Included are some performance enhancements: storage key
initialization, zero page cache synonyms, system call micro
optimization and the speedup patches for dasdfmt. Sebastian managed
to get rid of the special casing for the console device in the cio
layer. And the usual bunch of bug fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
s390/pci: use pci_scan_root_bus
s390/scm_blk: fix memleak in init function
s390/scm_blk: allow more cluster size values
s390/cio: fix irq statistics
s390/memory hotplug: prevent offline of active memory increments
s390: remove small stack config option
s390: system call path micro optimization
s390: lowcore stack pointer offsets
s390/uapi: change struct statfs[64] member types to unsigned values
s390/pci: return correct dma address for offset > PAGE_SIZE
s390/ptrace: remove empty ifdefs
s390/compat: remove ptrace compat definitions from uapi header file
s390/compat: fix compile error for !COMPAT
s390/compat: fix compat_sys_statfs() memory corruption
s390/zcore: Fix HSA copy length for last block
s390/mm,gmap: segment mapping race
s390/mm,gmap: implement gmap_translate()
s390/pci: remove disable_device implementation
s390/pci: disable per default
s390/pci: return error after failed pci ops
...
- Populate the boot_params with EDD data.
- Cleanups in the IRQ code.
Bug-fixes:
- CPU hotplug offline/online in PVHVM mode.
- Re-upload processor PM data after ACPI S3 suspend/resume cycle.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRcWFDAAoJEFjIrFwIi8fJQScIAJmnsPzoqd/USahqgbOvc0Nb
fJgzvno0Lfuvi5NipMpMDNCpCxRuikoJe6ocoF6E0+poucckRGDFSC3R2KVgLR2O
pXkO7bzggkUYkLehW7gXmM4IlvhLxnsfEofDWxG2VJy6RfWxFk+84v/uimQSIB0D
jI9FB3oUhfA+IT8/3Iofyv2OiPH39zNLlzidAnVXmJ8SoJFDLt3l1IymYqVdq6Lt
AKL0IXa31f+yfj9Vli1mkBsxuEIvIo5tVQNn250B4cMlR8mcWsQBnxIeA2M+8Jhl
d2ereTBwhjohCrFR/TWlXYrMlL+XVucI7J7agf3tF4kmDUqjg+c9hUkszSOPjEc=
=yJWr
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen updates from Konrad Rzeszutek Wilk:
"Features:
- Populate the boot_params with EDD data.
- Cleanups in the IRQ code.
Bug-fixes:
- CPU hotplug offline/online in PVHVM mode.
- Re-upload processor PM data after ACPI S3 suspend/resume cycle."
And Konrad gets a gold star for sending the pull request early when he
thought he'd be away for the first week of the merge window (but because
of 3.9 dragging out to -rc8 he then re-sent the reminder on the first
day of the merge window anyway)
* tag 'stable/for-linus-3.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: resolve section mismatch warnings in xen-acpi-processor
xen: Re-upload processor PM data to hypervisor after S3 resume (v2)
xen/smp: Unifiy some of the PVs and PVHVM offline CPU path
xen/smp/pvhvm: Don't initialize IRQ_WORKER as we are using the native one.
xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM
xen/spinlock: Check against default value of -1 for IRQ line.
xen/time: Add default value of -1 for IRQ and check for that.
xen/events: Check that IRQ value passed in is valid.
xen/time: Fix kasprintf splat when allocating timer%d IRQ line.
xen/smp/spinlock: Fix leakage of the spinlock interrupt line for every CPU online/offline
xen/smp: Fix leakage of timer interrupt line for every CPU online/offline.
xen kconfig: fix select INPUT_XEN_KBDDEV_FRONTEND
xen: drop tracking of IRQ vector
x86/xen: populate boot_params with EDD data
A late-arriving fix for musb on OMAP4, resolving an issue where the musb
IP won't be clocked and thus not functional. Small in scope, most of the
lines changed is a longish comment.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=pHY5
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
"A late-arriving fix for musb on OMAP4, resolving an issue where the
musb IP won't be clocked and thus not functional. Small in scope,
most of the lines changed is a longish comment."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
this MUSB no longer works on omap4 based devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=MBEd
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.
* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull late parisc fixes from Helge Deller:
"I know it's *very* late in the 3.9 release cycle, but since there
aren't that many people testing the parisc linux kernel, a few (for
our port) critical issues just showed up a few days back for the first
time.
What's in it?
- add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
kernel.
- change kunmap() macro to static inline function. This fixes a
debian/gcc-4.4 build error.
- add locking when doing PTE updates. This fixes random userspace
crashes.
- disable (optional) -mlong-calls compiler option for modules, else
modules can't be loaded at runtime.
- a smart patch by Will Deacon which fixes 64bit put_user() warnings
on 32bit kernel."
* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
parisc: disable -mlong-calls compiler option for kernel modules
parisc: uaccess: fix compiler warnings caused by __put_user casting
parisc: Change kunmap macro to static inline function
parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
The pci config space accessors on s390 are (now) smart enough to
figure out if a pci function is available. So instead of calling
pci_create_root_bus and then pci_scan_single_device for each
available function just call pci_scan_root_bus and let the pci core
do the scanning (via config reads on all possible functions) and
device creation.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We've seen repeatedly that 8KB stack size on 64 bit kernels
is not sufficient.
So simply remove the config option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a pointer to the system call table to the thread_info structure.
The TIF_31BIT bit is set or cleared by SET_PERSONALITY exactly once
for the lifetime of a process. With the pointer to the correct system
call table in thread_info the system call code in entry64.S path can
drop the check for TIF_31BIT which saves a couple of instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Store the stack pointers in the lowcore for the kernel stack, the async
stack and the panic stack with the offset required for the first user.
This avoids an unnecessary add instruction on the system call path.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=l/fT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' into x86/urgent
* The EFI variable anti-bricking algorithm merged in -rc8 broke booting
on some Apple machines because they implement EFI spec 1.10, which
doesn't provide a QueryVariableInfo() runtime function and the logic
used to check for the existence of that function was insufficient.
Fix from Josh Boyer.
* The anti-bricking algorithm also introduced a compiler warning on
32-bit. Fix from Borislav Petkov.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
User applications running on SMP kernels have long suffered from instability
and random segmentation faults. This patch improves the situation although
there is more work to be done.
One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at). This
change modifies the routines to all use the same lock pa_dbit_lock. This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated. The UP and SMP code are now
identical.
The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
CONFIG_MLONGCALLS was introduced in commit
ec758f9832 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.
But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.
So, let's just disable this compiler option when compiling kernel modules.
Signed-off-by: Helge Deller <deller@gmx.de>
When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:
kernel/signal.c: In function 'copy_siginfo_to_user':
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
[...]
This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.
Without the change, the following error can occur:
CC drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1
I believe parisc is the only arch to implement kunmap using a macro.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!
The attached patch resolves this problem. It is based on the s390
implementation of ucmpdi2.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the omap1
defconfig, avoiding these build warnings:
warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG)
Also fix a Makefile typo while we're at it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301,
which is now only visible when USB_PHY is also enabled.
This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding these build errors:
warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C)
drivers/built-in.o: In function `usb_hcd_nxp_probe':
drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client'
drivers/built-in.o: In function `lpc32xx_udc_probe':
drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull sparc fix from David Miller:
"Brown paper bag fix for sparc64"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo. Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.
This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot. Fix based on
a suggestion from Matthew Garrett.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Fix this:
arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’
after cc5a080c5d ("efi: Pass boot services variable info to runtime
code").
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Here are some late urgent fixes for v3.10 merge window.
All of these errors were introduced by recent commits
which are in linux-next.
f_obex, multi and cdc2 gadget drivers have learned to
return a proper error code when something goes wrong.
usb_bind_phy() was mistakenly placed into .init.text
section which caused Section mismatch warnings and undefined
reference compile errors.
f_source_sink had a copy-paste error which is now corrected.
g_zero got a memory leak plugged.
Two defconfigs got fixed to enable the newly introduced
CONFIG_USB_PHY.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=UKZz
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v3.10-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: urgent fixes for v3.10 merge window
Here are some late urgent fixes for v3.10 merge window.
All of these errors were introduced by recent commits
which are in linux-next.
f_obex, multi and cdc2 gadget drivers have learned to
return a proper error code when something goes wrong.
usb_bind_phy() was mistakenly placed into .init.text
section which caused Section mismatch warnings and undefined
reference compile errors.
f_source_sink had a copy-paste error which is now corrected.
g_zero got a memory leak plugged.
Two defconfigs got fixed to enable the newly introduced
CONFIG_USB_PHY.
Commit edc7cb2 (usb: phy: make it a menuconfig) makes USB_MXS_PHY
be a sub-item of menuconfig symbol USB_PHY. This change gets the
selection of CONFIG_USB_MXS_PHY in mxs_defconfig lost. Hence the
boot stops at the point below.
[ 1.600867] ci_hdrc ci_hdrc.0: doesn't support gadget
[ 1.606282] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 1.613522] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
Add CONFIG_USB_PHY to have the CONFIG_USB_MXS_PHY selection back to
work.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Commit edc7cb2 (usb: phy: make it a menuconfig) makes USB_MXS_PHY
be a sub-item of menuconfig symbol USB_PHY. This change gets the
selection of CONFIG_USB_MXS_PHY in imx_v6_v7_defconfig lost. Hence the
boot stops at the point below.
ci_hdrc ci_hdrc.0: doesn't support gadget
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
Add CONFIG_USB_PHY to have the CONFIG_USB_MXS_PHY selection back to
work.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Kay Sievers reported that coreutils' stat tool has a problem with
s390's statfs[64] definition:
> The definition of struct statfs::f_type needs a fix. s390 is the only
> architecture in the kernel that uses an int and expects magic
> constants lager than INT_MAX to fit into.
>
> A fix is needed to make Fedora boot on s390, it currently fails to do
> so. Userspace does not want to add code to paper-over this issue.
[...]
> Even coreutils cannot handle it:
> #define RAMFS_MAGIC 0x858458f6
> # stat -f -c%t /
> ffffffff858458f6
>
> #define BTRFS_SUPER_MAGIC 0x9123683E
> # stat -f -c%t /mnt
> ffffffff9123683e
The bug is caused by an implicit sign extension within the stat tool:
out_uint_x (pformat, prefix_len, statfsbuf->f_type);
where the format finally will be "%lx".
A similar problem can be found in the 'tail' tool.
s390 is the only architecture which has an int type f_type member in
struct statfs[64]. Other architectures have either unsigned ints or
long values, so that the problem doesn't occur there.
Therefore change the type of the f_type member to unsigned int, so
that we get zero extension instead of sign extension when assignment to
a long value happens.
This patch changes the s390 uapi struct stafs[64] definition in the kernel
to contain only unsigned values.
This was true for 32 bit builds anyway, since we use the generic uapi
header file in that case. So lets not include conditionally the generic
uapi header file but have the s390 implementation completely independent.
Also fix the types of struct compat_stafs to match reality and move the
definition of struct compat_statfs64 to asm/compat.h since it is not part
of the api.
Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For offset > PAGE_SIZE, s390_dma_map_pages() will issue a warning
and return a wrong dma address.
This patch removes the warning and fixes the dma return address
calculation.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The compat definitions are not part of the uapi. So move them to
s390's private compat header file.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix this one for !COMPAT:
compat.h: In function ‘arch_compat_alloc_user_space’:
compat.h:292:2: error: implicit declaration of function ‘is_compat_task’
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The f_spare field within struct compat_statfs is four bytes larger
than within the native 31 bit struct statfs.
compat_sys_statfs() clears the f_spare field in user space which
means that in compat mode four bytes that are behind the user space
supplied struct compat_statfs will be corrupted (zeroed).
According to Thomas Gleixner's Linux 2.6 history tree this bug is
present since v2.5.74 87880da124 "[PATCH] s390: 31 bit compat.".
So it get's fixed shortly before its 10th anniversary. Tough luck.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The gmap_map_segment function creates a special invalid segment table
entry with the address of the requested target location in the process
address space. The first access will create the connection between the
gmap segment table and the target page table of the main process.
If two threads do this concurrently both will walk the page tables and
allocate a gmap_rmap structure for the same segment table entry.
To avoid the race recheck the segment table entry after taking to page
table lock.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Implement gmap_translate() function which translates a guest absolute address
to a user space process address without establishing the guest page table
entries.
This is useful for kvm guest address translations where no memory access
is expected to happen soon (e.g. tprot exception handler).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull MIPS fix from Ralf Baechle:
"Revert the change of the definition of PAGE_MASK which was prettier
but broke a few relativly rare platforms"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
This reverts commit c17a655478.
Manuel Lauss writes:
lmo commit c17a6554 (MIPS: page.h: Provide more readable definition for
PAGE_MASK) apparently breaks ioremap of 36-bit addresses on my Alchemy
systems (PCI and PCMCIA) The reason is that in arch/mips/mm/ioremap.c
line 157 (phys_addr &= PAGE_MASK) bits 32-35 are cut off. Seems the
new PAGE_MASK is explicitly 32bit, or one could make it signed instead
of unsigned long.
Pull kdump fixes from Peter Anvin:
"The kexec/kdump people have found several problems with the support
for loading over 4 GiB that was introduced in this merge cycle. This
is partly due to a number of design problems inherent in the way the
various pieces of kdump fit together (it is pretty horrifically manual
in many places.)
After a *lot* of iterations this is the patchset that was agreed upon,
but of course it is now very late in the cycle. However, because it
changes both the syntax and semantics of the crashkernel option, it
would be desirable to avoid a stable release with the broken
interfaces."
I'm not happy with the timing, since originally the plan was to release
the final 3.9 tomorrow. But apparently I'm doing an -rc8 instead...
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kexec: use Crash kernel for Crash kernel low
x86, kdump: Change crashkernel_high/low= to crashkernel=,high/low
x86, kdump: Retore crashkernel= to allocate under 896M
x86, kdump: Set crashkernel_low automatically
Pull x86 fixes from Peter Anvin:
"Three groups of fixes:
1. Make sure we don't execute the early microcode patching if family
< 6, since it would touch MSRs which don't exist on those
families, causing crashes.
2. The Xen partial emulation of HyperV can be dealt with more
gracefully than just disabling the driver.
3. More EFI variable space magic. In particular, variables hidden
from runtime code need to be taken into account too."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode: Verify the family before dispatching microcode patching
x86, hyperv: Handle Xen emulation of Hyper-V more gracefully
x86,efi: Implement efi_no_storage_paranoia parameter
efi: Export efi_query_variable_store() for efivars.ko
x86/Kconfig: Make EFI select UCS2_STRING
efi: Distinguish between "remaining space" and actually used space
efi: Pass boot services variable info to runtime code
Move utf16 functions to kernel core and rename
x86,efi: Check max_size only if it is non-zero.
x86, efivars: firmware bug workarounds should be in platform code
Pull ARM fixes from Russell King:
"A set of fixes from various people - Will Deacon gets a prize for
removing code this time around. The biggest fix in this lot is
sorting out the ARM740T mess. The rest are relatively small fixes."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7699/1: sched_clock: Add more notrace to prevent recursion
ARM: 7698/1: perf: fix group validation when using enable_on_exec
ARM: 7697/1: hw_breakpoint: do not use __cpuinitdata for dbg_cpu_pm_nb
ARM: 7696/1: Fix kexec by setting outer_cache.inv_all for Feroceon
ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()
ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE
ARM: modules: don't export cpu_set_pte_ext when !MMU
ARM: mm: remove broken condition check for v4 flushing
ARM: mm: fix numerous hideous errors in proc-arm740.S
ARM: cache: remove ARMv3 support code
ARM: tlbflush: remove ARMv3 support
Pull sparc fixes from David Miller:
1) Fix race in sparc64 TLB shootdowns, we have to synchronize with the
sibling cpus completing if we are passing them a reference via
pointer to a data structure.
2) Fix cleaning of bitmaps in sparc32, from Akinobu Mita.
3) Fix various sparc header mistakes, some of which resulted in
userland build breakage. From Sam Ravnborg.
4) Kill ghost declarations and defines missed when several bits of code
got deleted recently.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix race in TLB batch processing.
sparc: use asm-generic version of types.h
bbc_i2c: fix section mismatch warning
sparc: use generic headers
sparc:cleanup unused code in smp_32.h
sparc/iommu: fix typo s/265KB/256KB/
sparc/srmmu: clear trailing edge of bitmap properly
sparc:remove unused declaration smp_boot_cpus()
Matt Fleming (1):
x86, efivars: firmware bug workarounds should be in platform
code
Matthew Garrett (3):
Move utf16 functions to kernel core and rename
efi: Pass boot services variable info to runtime code
efi: Distinguish between "remaining space" and actually used
space
Richard Weinberger (2):
x86,efi: Check max_size only if it is non-zero.
x86,efi: Implement efi_no_storage_paranoia parameter
Sergey Vlasov (2):
x86/Kconfig: Make EFI select UCS2_STRING
efi: Export efi_query_variable_store() for efivars.ko
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
For each CPU vendor that implements CPU microcode patching, there will
be a minimum family for which this is implemented. Verify this
minimum level of support.
This can be done in the dispatch function or early in the application
functions. Doing the latter turned out to be somewhat awkward because
of the ineviable split between the BSP and the AP paths, and rather
than pushing deep into the application functions, do this in
the dispatch function.
Reported-by: "Bryan O'Donoghue" <bryan.odonoghue.lkml@nexus-software.ie>
Suggested-by: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1366392183-4149-1-git-send-email-bryan.odonoghue.lkml@nexus-software.ie
As reported by Dave Kleikamp, when we emit cross calls to do batched
TLB flush processing we have a race because we do not synchronize on
the sibling cpus completing the cross call.
So meanwhile the TLB batch can be reset (tb->tlb_nr set to zero, etc.)
and either flushes are missed or flushes will flush the wrong
addresses.
Fix this by using generic infrastructure to synchonize on the
completion of the cross call.
This first required getting the flush_tlb_pending() call out from
switch_to() which operates with locks held and interrupts disabled.
The problem is that smp_call_function_many() cannot be invoked with
IRQs disabled and this is explicitly checked for with WARN_ON_ONCE().
We get the batch processing outside of locked IRQ disabled sections by
using some ideas from the powerpc port. Namely, we only batch inside
of arch_{enter,leave}_lazy_mmu_mode() calls. If we're not in such a
region, we flush TLBs synchronously.
1) Get rid of xcall_flush_tlb_pending and per-cpu type
implementations.
2) Do TLB batch cross calls instead via:
smp_call_function_many()
tlb_pending_func()
__flush_tlb_pending()
3) Batch only in lazy mmu sequences:
a) Add 'active' member to struct tlb_batch
b) Define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
c) Set 'active' in arch_enter_lazy_mmu_mode()
d) Run batch and clear 'active' in arch_leave_lazy_mmu_mode()
e) Check 'active' in tlb_batch_add_one() and do a synchronous
flush if it's clear.
4) Add infrastructure for synchronous TLB page flushes.
a) Implement __flush_tlb_page and per-cpu variants, patch
as needed.
b) Likewise for xcall_flush_tlb_page.
c) Implement smp_flush_tlb_page() to invoke the cross-call.
d) Wire up global_flush_tlb_page() to the right routine based
upon CONFIG_SMP
5) It turns out that singleton batches are very common, 2 out of every
3 batch flushes have only a single entry in them.
The batch flush waiting is very expensive, both because of the poll
on sibling cpu completeion, as well as because passing the tlb batch
pointer to the sibling cpus invokes a shared memory dereference.
Therefore, in flush_tlb_pending(), if there is only one entry in
the batch perform a completely asynchronous global_flush_tlb_page()
instead.
Reported-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
cyc_to_sched_clock() is called by sched_clock() and cyc_to_ns()
is called by cyc_to_sched_clock(). I suspect that some compilers
inline both of these functions into sched_clock() and so we've
been getting away without having a notrace marking. It seems that
my compiler isn't inlining cyc_to_sched_clock() though, so I'm
hitting a recursion bug when I enable the function graph tracer,
causing my system to crash. Marking these functions notrace fixes
it. Technically cyc_to_ns() doesn't need the notrace because it's
already marked inline, but let's just add it so that if we ever
remove inline from that function it doesn't blow up.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Only one remaining fix for arm-soc platforms at this time, a small
bugfix for cpu hotplug on highbank platforms that has become much
easier to hit as of late. Details in the patch description, but it's
small and well-contained and definitely impacts users of the platform,
so 3.9 seems appropriate.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=j3Hq
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Only one remaining fix for arm-soc platforms at this time, a small
bugfix for cpu hotplug on highbank platforms that has become much
easier to hit as of late.
Details in the patch description, but it's small and well-contained
and definitely impacts users of the platform, so 3.9 seems
appropriate."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: highbank: fix cache flush ordering for cpu hotplug
The L1 data cache flush needs to be after highbank_set_cpu_jump call which
pollutes the cache with the l2x0_lock. This causes other cores to deadlock
waiting for the l2x0_lock. Moving the flush of the entire data cache after
highbank_set_cpu_jump fixes the problem. Use flush_cache_louis instead of
flush_cache_all are that is sufficient to flush only the L1 data cache.
flush_cache_louis did not exist when highbank_cpu_die was originally
written.
With PL310 errata 769419 enabled, a wmb is inserted into idle which takes
the l2x0_lock. This makes the problem much more easily hit and causes
reset to hang.
Reported-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Install the Hyper-V specific interrupt handler only when needed. This would
permit us to get rid of the Xen check. Note that when the vmbus drivers invokes
the call to register its handler, we are sure to be running on Hyper-V.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Link: http://lkml.kernel.org/r/1366299886-6399-1-git-send-email-kys@microsoft.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
fixed the following compile error when use avr32 atstk1006_defconfig:
drivers/mtd/nand/atmel_nand.c: In function 'pmecc_err_location':
drivers/mtd/nand/atmel_nand.c:639: error: implicit declaration of function 'writel_relaxed'
which was introduced by commit 1c7b874d33 ("mtd: at91: atmel_nand: add
Programmable Multibit ECC controller support"). The PMECC for nand
flash code uses writel_relaxed(). But in avr32, there is no macro
"writel_relaxed" defined.
This patch add writex_relaxed macro definitions.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Havard Skinnemoen <havard@skinnemoen.net>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the very unlikely event where a guest would be foolish enough to
*read* from a write-only cache maintainance register, we end up
with preemption disabled, due to a misplaced get_cpu().
Just move the "is_write" test outside of the critical section.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per hpa, use crashkernel=X,high crashkernel=Y,low instead of
crashkernel_hign=X crashkernel_low=Y. As that could be extensible.
-v2: according to Vivek, change delimiter to ;
-v3: let hign and low only handle simple form and it conforms to
description in kernel-parameters.txt
still keep crashkernel=X override any crashkernel=X,high
crashkernel=Y,low
-v4: update get_last_crashkernel returning and add more strict
checking in parse_crashkernel_simple() found by HATAYAMA.
-v5: Change delimiter back to , according to HPA.
also separate parse_suffix from parse_simper according to vivek.
so we can avoid @pos in that path.
-v6: Tight the checking about crashkernel=X,highblahblah,high
found by HTYAYAMA.
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-5-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Vivek found old kexec-tools does not work new kernel anymore.
So change back crashkernel= back to old behavoir, and add crashkernel_high=
to let user decide if buffer could be above 4G, and also new kexec-tools will
be needed.
-v2: let crashkernel=X override crashkernel_high=
update description about _high will be ignored by crashkernel=X
-v3: update description about kernel-parameters.txt according to Vivek.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-4-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Chao said that kdump does does work well on his system on 3.8
without extra parameter, even iommu does not work with kdump.
And now have to append crashkernel_low=Y in first kernel to make
kdump work.
We have now modified crashkernel=X to allocate memory beyong 4G (if
available) and do not allocate low range for crashkernel if the user
does not specify that with crashkernel_low=Y. This causes regression
if iommu is not enabled. Without iommu, swiotlb needs to be setup in
first 4G and there is no low memory available to second kernel.
Set crashkernel_low automatically if the user does not specify that.
For system that does support IOMMU with kdump properly, user could
specify crashkernel_low=0 to save that 72M low ram.
-v3: add swiotlb_size() according to Konrad.
-v4: add comments what 8M is for according to hpa.
also update more crashkernel_low= in kernel-parameters.txt
-v5: update changelog according to Vivek.
-v6: Change description about swiotlb referring according to HATAYAMA.
Reported-by: WANG Chao <chaowang@redhat.com>
Tested-by: WANG Chao <chaowang@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-2-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Events may be created with attr->disabled == 1 and attr->enable_on_exec
== 1, which confuses the group validation code because events with the
PERF_EVENT_STATE_OFF are not considered candidates for scheduling, which
may lead to failure at group scheduling time.
This patch fixes the validation check for ARM, so that events in the
OFF state are still considered when enable_on_exec is true.
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Reported-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We must not declare dbg_cpu_pm_nb as __cpuinitdata as we need it after
system initialization for Suspend and CPUIdle.
This was done in commit 9a6eb310ea ("ARM: hw_breakpoint: Debug powerdown
support for self-hosted debug").
Cc: stable@vger.kernel.org
Cc: Dietmar Eggemann <Dietmar.Eggemann@arm.com>
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On Feroceon the L2 cache becomes non-coherent with the CPU
when the L1 caches are disabled. Thus the L2 needs to be invalidated
after both L1 caches are disabled.
On kexec before the starting the code for relocation the kernel,
the L1 caches are disabled in cpu_froc_fin (cpu_v7_proc_fin for Feroceon),
but after L2 cache is never invalidated, because inv_all is not set
in cache-feroceon-l2.c.
So kernel relocation and decompression may has (and usually has) errors.
Setting the function enables L2 invalidation and fixes the issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Illia Ragozin <illia.ragozin@grapecom.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
tcm_init() call iotable_init() and it use early_alloc variants which
do memblock allocation. Directly using memblock allocation after
initializing bootmem should not permitted, because bootmem can't know
where are additinally reserved.
So move tcm_init() to a safe place before initalizing bootmem.
(On the U300)
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit b4cbb197c7 ("vm: add vm_iomap_memory() helper function") added
a helper function wrapper around io_remap_pfn_range(), and every other
architecture defined it in <asm/pgtable.h>.
The s390 choice of <asm/io.h> may make sense, but is not very convenient
for this case, and gratuitous differences like that cause unexpected errors like this:
mm/memory.c: In function 'vm_iomap_memory':
mm/memory.c:2439:2: error: implicit declaration of function 'io_remap_pfn_range' [-Werror=implicit-function-declaration]
Glory be the kbuild test robot who noticed this, bisected it, and
reported it to the guilty parties (ie me).
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using this parameter one can disable the storage_size/2 check if
he is really sure that the UEFI does sane gc and fulfills the spec.
This parameter is useful if a devices uses more than 50% of the
storage by default.
The Intel DQSW67 desktop board is such a sucker for exmaple.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
pci_disable_device is called by a driver after it stops using the pci
function - e.g. during the removal of the driver. The current
implementation removes the architecture specific information of this
function such that even after a call to pci_enable_device the pci
function is no longer usable. Just remove pcibios_disable_device.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Disable pci on s390. Enable with pci=on.
Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Access to pci config space via pci_ops should not fail silently.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If a pci load instruction fails the content of the register where the
data is stored is possibly unchanged. Fix the inline assembly wrapper
__pcilg to not return stale data. Additionally fix the callers of this
function who access uninitialized variables.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Don't let pci_load and friends crash the kernel when called with
e.g. an invalid offset. Return -ENXIO instead.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use distinct (and hopefully sane) names for the pci instruction
wrappers.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Uninline pci related instruction wrappers to de-bloat the code:
add/remove: 15/0 grow/shrink: 2/24 up/down: 1326/-12628 (-11302)
This is especially useful for the inlined pci read and write functions
which are used all over the kernel. Also remove the unused __stpcifc
while at it.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use pcibios_add_device to do arch specific device initialization.
This function will be called during pci_bus_add_device.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Don't modify function handles to get a disabled handle - call
clp_disable_fh. With this change we also do no longer deconfigure
enabled functions.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the debugfs to keep track of a pci function's status changes.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The hash used for mapping irq numbers to msi descriptors does not
utilize all buckets that were allocated. Fix this by using the same
value (computed by the number of bits used for the hash function) at
relevant places.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds the last breaking event address as parameter
for 31 bit compat program signal handlers as it is already
done for 64 bit programs.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
force_console is used to wake up the CCW based console device to
print a panic message in case something goes wrong in a suspend
or resume cycle. Stop using the static console_subchannel and add
a parameter to this function to specify which ccw device we have
to wake up.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
wait_cons_dev is used to busy wait for an interrupt on the console
ccw device. Stop using the static console_subchannel and add a
parameter to this function to specify on which ccw device/subchannel
we have to do the polling.
While at it rename the function to ccw_device_wait_idle and
move it to device.c
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since commit 5f954c34 ([S390] hibernation: fix lowcore handling)
the absolute zero lowcore is lost during suspend/resume.
For example, this leads to the problem that the re-IPL device
for kdump is no longer set after resume.
With this patch during suspend a buffer is allocated in the new PM
notifier "suspend_pm_cb" and then the absolute zero lowcore is saved
to that buffer. The resume code then copies back this buffer to
absolute zero and afterwards the PM notifier releases the memory.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove unused __BITOPS_ALIGN, and replace __BITOPS_WORDSIZE with
BITS_PER_LONG.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use sske with multiple block control to initialize storage keys within
a 1 MB frame at once.
It turned out that the sske with mb=1 is an order of magnitude faster
than pfmf. This is only an issue for very large systems (several 100GB)
where storage key initialization could last more than a minute.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
dumpstack() did not always print a sane callchain when being called.
The reason is that show_trace() accessed register 15 directly to get
the current stack pointer and passed that pointer to __show_trace()
which expects a valid stack frame pointer as argument.
However due to tail call optimization the stack frame may not exist
anymore when __show_trace() gets called and therefore an invalid
stack frame pointer gets passed.
To prevent that disable tail call optimization for call chain walking
functions.
So move all the show_* functions to a dumpstack.c file like other
architectures have it already and add a -fno-optimize-sibling-calls
compile flag to both dumpstack.c and stacktrace.c to prevent tail
call optimization.
Fixes callchains that looked e.g. like this:
[ 12.868258] Call Trace:
[ 12.868262] ([<0000000000008000>] 0x8000)
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Used PTR_RET function instead of IS_ERR and PTR_ERR.
Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Rewrote conditional statement and eliminated the out_kthread label.
Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pass buffer length in extra parameter.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To avoid cache synonyms on System zEC12 32 independent zero pages are
required, one for each combination for bits 2**12 to 2**16 of the virtual
address. To avoid wasting too much memory on small virtual systems the
number of zero pages is limited to 4 if the memory size is less or equal
to 64MB.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Protection exception usually are suppressing and the fault handler
needs to rewind the PSW by the instruction length to get the correct
fault address. Except for protection exceptions while the CPU is in
the middle of a transaction. The CPU stores the transaction abort
PSW at the start of the transaction, if the transaction is aborted
the PSW is already correct and may not be modified by the fault
handler.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull ARM fix from Russell King:
"A build fix for an incomplete change to the ARM cpu suspend code"
* branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: Do 15e0d9e37c (ARM: pm: let platforms select cpu_suspend support) properly
Pull kvm fixes from Marcelo Tosatti:
"PPC and ARM KVM fixes"
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting
kvm/ppc/e500: eliminate tlb_refs
kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit
kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid
kvm/powerpc/e500mc: fix tlb invalidation on cpu migration
this merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=I7AW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes
Pull powerpc fixes from Stephen Rothwell:
"Three regresions in the PowerPC code. One from v3.7 the others from
this merge window."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
powerpc: add a missing label in resume_kernel
powerpc: Fix audit crash due to save/restore PPR changes
powerpc: fix compiling CONFIG_PPC_TRANSACTIONAL_MEM when CONFIG_ALTIVEC=n
Looks like our L_PTE_S2_RDWR definition is slightly wrong,
and is actually write only (see ARM ARM Table B3-9, Stage 2 control
of access permissions). Didn't make a difference for normal pages,
as we OR the flags together, but I'm still wondering how it worked
for Stage-2 mapped devices, such as the GIC.
Brown paper bag time, again.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Commit 3401d54696 (KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR
ioctl) added support for the KVM_CAP_ARM_SET_DEVICE_ADDR capability,
but failed to add a break in the relevant case statement, returning
the number of CPUs instead.
Luckilly enough, the CONFIG_NR_CPUS=0 patch hasn't been merged yet
(https://lkml.org/lkml/diff/2012/3/31/131/1), so the bug wasn't
noticed.
Just give it a break!
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
There is no need to use the PV version of the IRQ_WORKER mechanism
as under PVHVM we are using the native version. The native
version is using the SMP API.
They just sit around unused:
69: 0 0 xen-percpu-ipi irqwork0
83: 0 0 xen-percpu-ipi irqwork1
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
See git commit f10cd522c5
(xen: disable PV spinlocks on HVM) for details.
But we did not disable it everywhere - which means that when
we boot as PVHVM we end up allocating per-CPU irq line for
spinlock. This fixes that.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Linus Torvalds