When "eagerfpu=off" is given as a command-line input, the kernel
should disable AVX support.
The Task Switched bit used for lazy context switching does not
support AVX. If AVX is enabled without eagerfpu context
switching, one task's AVX state could become corrupted or leak
to other tasks. This is a bug and has bad security implications.
This only affects systems that have AVX/AVX2/AVX512 and this
issue will be found only when one actually uses AVX/AVX2/AVX512
_AND_ does eagerfpu=off.
Reference: Intel Software Developer's Manual Vol. 3A
Sec. 2.5 Control Registers:
TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the
x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch
to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4
instruction is actually executed by the new task.
Sec. 13.4.1 Using the TS Flag to Control the Saving of the X87
FPU and SSE State
When the TS flag is set, the processor monitors the instruction
stream for x87 FPU, MMX, SSE instructions. When the processor
detects one of these instructions, it raises a
device-not-available exeception (#NM) prior to executing the
instruction.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-5-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This issue is a fallout from the command-line parsing move.
When "eagerfpu=off" is given as a command-line input, the kernel
should disable MPX support. The decision for turning off MPX was
made in fpu__init_system_ctx_switch(), which is after the
selection of the XSAVE format. This patch fixes it by getting
that decision done earlier in fpu__init_system_xstate().
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-4-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add macros for the alternative XSAVE*/XRSTOR* operations which
contain the fault handling and use them. Kill xstate_fault().
Also, copy_xregs_to_kernel() didn't have the extended state as
memory reference in the asm.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447932326-4371-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add an XSTATE_OP() macro which contains the XSAVE* fault handling
and replace all non-alternatives users of xstate_fault() with
it.
This fixes also the buglet in copy_xregs_to_user() and
copy_user_to_xregs() where the inline asm didn't have @xstate as
memory reference and thus potentially causing unwanted
reordering of accesses to the extended state.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447932326-4371-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 sigcontext header cleanups from Ingo Molnar:
"This series reorganizes and cleans up various aspects of the main
sigcontext UAPI headers, such as unifying the data structures and
updating/adding lots of comments to explain all the ABI details and
quirks. The headers can now also be built in user-space standalone"
* 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Clean up too long lines
x86/headers: Remove <asm/sigcontext.h> references on the kernel side
x86/headers: Remove direct sigcontext32.h uses
x86/headers: Convert sigcontext_ia32 uses to sigcontext_32
x86/headers: Unify 'struct sigcontext_ia32' and 'struct sigcontext_32'
x86/headers: Make sigcontext pointers bit independent
x86/headers: Move the 'struct sigcontext' definitions into the UAPI header
x86/headers: Clean up the kernel's struct sigcontext types to be ABI-clean
x86/headers: Convert uses of _fpstate_ia32 to _fpstate_32
x86/headers: Unify 'struct _fpstate_ia32' and i386 struct _fpstate
x86/headers: Unify register type definitions between 32-bit compat and i386
x86/headers: Use ABI types consistently in sigcontext*.h
x86/headers: Separate out legacy user-space structure definitions
x86/headers: Clean up and better document uapi/asm/sigcontext.h
x86/headers: Clean up uapi/asm/sigcontext32.h
x86/headers: Fix (old) header file dependency bug in uapi/asm/sigcontext32.h
AVX-512 has 3 separate state components:
1. opmask registers
2. zmm upper half of registers 0-15
3. new zmm registers (16-31)
This patch adds C structures for the three components along with
a few comments mostly lifted from the SDM to explain what they
do. This will allow us to check our structures against what the
hardware tells us about the sizes of the components.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233129.F2433B98@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are about to rework all of the "extended state" definitions.
This makes the 'ymm' naming consistent with the AVX-512 types
we will introduce later.
We also add a convenience type: "reg_128_bit" so that we do
not have to spell out our arithmetic.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233129.B4EB045F@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MPX includes two separate "extended state components". There is
no real need to have an 'mpx_struct' because we never really
manage the states together.
We also separate out the actual data in 'mpx_bndcsr_state' from
the padding. We will shortly be checking the state sizes
against our structures and need them to match. For consistency,
we also ensure to prefix these types with 'mpx_'.
Lastly, we add some comments to mirror some of the descriptions
in the Intel documents (SDM) of the various state components.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233129.384B73EB@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'xstate.c' code has a bunch of references to '2'. This
is because we have a lot more work to do for the "extended"
xstates than the "legacy" ones and state component 2 is the
first "extended" state.
This patch replaces all of the instances of '2' with
FIRST_EXTENDED_XFEATURE, which clearly explains what is
going on.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233128.A8C0BF51@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a logcal followon to the last patch. It makes the
XFEATURE_MAX naming consistent with the other enum values.
This is what Ingo suggested.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233127.A541448F@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two concepts that have some confusing naming:
1. Extended State Component numbers (currently called
XFEATURE_BIT_*)
2. Extended State Component masks (currently called XSTATE_*)
The numbers are (currently) from 0-9. State component 3 is the
bounds registers for MPX, for instance.
But when we want to enable "state component 3", we go set a bit
in XCR0. The bit we set is 1<<3. We can check to see if a
state component feature is enabled by looking at its bit.
The current 'xfeature_bit's are at best xfeature bit _numbers_.
Calling them bits is at best inconsistent with ending the enum
list with 'XFEATURES_NR_MAX'.
This patch renames the enum to be 'xfeature'. These also
happen to be what the Intel documentation calls a "state
component".
We also want to differentiate these from the "XSTATE_*" macros.
The "XSTATE_*" macros are a mask, and we rename them to match.
These macros are reasonably widely used so this patch is a
wee bit big, but this really is just a rename.
The only non-mechanical part of this is the
s/XSTATE_EXTEND_MASK/XFEATURE_MASK_EXTEND/
We need a better name for it, but that's another patch.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233126.38653250@viggo.jf.intel.com
[ Ported to v4.3-rc1. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
LightWeight Profiling was evidently an AMD profiling feature
that we never got around to implementing. Remove the references
to it.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233125.7E602284@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The original purpose of XSTATE_RESERVE was to carve out space
to store all of the possible extended state components that
get saved with the XSAVE instruction(s).
However, we are now almost entirely dynamically allocating
the buffers we use for XSAVE by placing them at the end of
the task_struct and them sizing them at boot. The one
exception for that is the init_task.
The maximum extended state component size that we have today
is on systems with space for AVX-512 and Memory Protection
Keys: 2696 bytes. We have reserved a PAGE_SIZE buffer in
the init_task via fpregs_state->__padding.
This check ensures that even if the component sizes or
layout were changed (which we do not expect), that we will
still not overflow the init_task's buffer.
In the case that we detect we might overflow the buffer,
we completely disable XSAVE support in the kernel and try
to boot as if we had 'legacy x87 FPU' support in place.
This is a crippled state without any of the XSAVE-enabled
features (MPX, AVX, etc...). But, it at least let us
boot safely.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233125.D948D475@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we want to _completely_ disable XSAVE support as far as
the kernel is concerned, we have a big set of feature flags
to clear. We currently only do this in cases where the user
asks for it to be disabled, but we are about to expand the
places where we do it to handle errors too.
Move the code in to xstate.c, and put it in the xstate.h
header. We will use it in the next patch too.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: dave@sr71.net
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150902233124.EA9A70E5@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all type definitions are in the UAPI header, include it
directly, instead of through <asm/sigcontext.h>.
[ We still keep asm/sigcontext.h, so that uapi/asm/sigcontext32.h
can include <asm/sigcontext.h>. ]
Acked-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1441438363-9999-16-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all sigcontext types are defined in asm/sigcontext.h,
remove the various sigcontext32.h uses in the kernel.
We still keep the header itself, which includes sigcontext.h, in
case user-space relies on it.
Acked-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1441438363-9999-15-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).
Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already. This saves from doing an extra slab
allocation at fork().
The only real downside here is that we have to stick everything
and the end of the task_struct. But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MPX code appears is calling a low-level FPU function
(copy_fpregs_to_fpstate()). This function is not able to
be called in all contexts, although it is safe to call
directly in some cases.
Although probably correct, the current code is ugly and
potentially error-prone. So, add a wrapper that calls
the (slightly) higher-level fpu__save() (which is preempt-
safe) and also ensures that we even *have* an FPU context
(in the case that this was called when in lazy FPU mode).
Ingo had this to say about the details about when we need
preemption disabled:
> it's indeed generally unsafe to access/copy FPU registers with preemption enabled,
> for two reasons:
>
> - on older systems that use FSAVE the instruction destroys FPU register
> contents, which has to be handled carefully
>
> - even on newer systems if we copy to FPU registers (which this code doesn't)
> then we don't want a context switch to occur in the middle of it, because a
> context switch will write to the fpstate, potentially overwriting our new data
> with old FPU state.
>
> But it's safe to access FPU registers with preemption enabled in a couple of
> special cases:
>
> - potentially destructively saving FPU registers: the signal handling code does
> this in copy_fpstate_to_sigframe(), because it can rely on the signal restore
> side to restore the original FPU state.
>
> - reading FPU registers on modern systems: we don't do this anywhere at the
> moment, mostly to keep symmetry with older systems where FSAVE is
> destructive.
>
> - initializing FPU registers on modern systems: fpu__clear() does this. Here
> it's safe because we don't copy from the fpstate.
>
> - directly writing FPU registers from user-space memory (!). We do this in
> fpu__restore_sig(), and it's safe because neither context switches nor
> irq-handler FPU use can corrupt the source context of the copy (which is
> user-space memory).
>
> Note that the MPX code's current use of copy_fpregs_to_fpstate() was safe I think,
> because:
>
> - MPX is predicated on eagerfpu, so the destructive F[N]SAVE instruction won't be
> used.
>
> - the code was only reading FPU registers, and was doing it only in places that
> guaranteed that an FPU state was already active (i.e. didn't do it in
> kthreads)
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183700.AA881696@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure the WARN_ON_FPU() macro consumes the macro argument,
to avoid 'unused variable' build warnings if the only use of
a variable is in debugging code.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
copy_kernel_to_xregs_booting() has a second parameter that is the mask
of xfeatures that should be copied - but this parameter is always -1.
Simplify the call site of this function, this also makes it more
similar to the function call signature of other copy_kernel_to*regs()
functions.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bring the __copy_fpstate_to_fpregs() and copy_fpstate_to_fpregs() functions
in line with the parameter passing convention of other kernel-to-FPU-registers
copying functions: pass around an in-memory FPU register state pointer,
instead of struct fpu *.
NOTE: This patch also changes the assembly constraint of the FXSAVE-leak
workaround from 'fpu->fpregs_active' to 'fpstate' - but that is fine,
as we only need a valid memory address there for the FILDL instruction.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
None of the copy_kernel_to_*regs() FPU register copying functions are
supposed to fail, and all of them have debugging checks that enforce
this.
Remove their return values and simplify their call sites, which have
redundant error checks and error handling code paths.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bring the __copy_fpstate_to_fpregs() and copy_fpstate_to_fpregs() functions
in line with the naming of other kernel-to-FPU-registers copying functions.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Copying from in-kernel FPU context buffers to FPU registers are
never supposed to fault.
Add debugging checks to copy_kernel_to_fxregs() and copy_kernel_to_fregs()
to double check this assumption.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remaining users of fpu__activate_fpstate() are all places that want to modify
FPU registers, rename the function to fpu__activate_fpstate_write() according
to this usage.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently fpu__activate_fpstate() is used for two distinct purposes:
- read access by ptrace and core dumping, where in the core dumping
case the current task's FPU state may be examined as well.
- write access by ptrace, which modifies FPU registers and expects
the modified registers to be reloaded on the next context switch.
Split out the reading side into fpu__activate_fpstate_read().
( Note that this is just a pure duplication of fpu__activate_fpstate()
for the time being, we'll optimize the new function in the next patch. )
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bobby Powers reported the following FPU warning during ELF coredumping:
WARNING: CPU: 0 PID: 27452 at arch/x86/kernel/fpu/core.c:324 fpu__activate_stopped+0x8a/0xa0()
This warning unearthed an invalid assumption about fpu__activate_stopped()
that I added in:
67e97fc2ec ("x86/fpu: Rename init_fpu() to fpu__unlazy_stopped() and add debugging check")
the old init_fpu() function had an (intentional but obscure) side effect:
when FPU registers are accessed for the current task, for reading, then
it synchronized live in-register FPU state with the fpstate by saving it.
So fix this bug by saving the FPU if we are the current task. We'll
still warn in fpu__save() if this is called for not yet stopped
child tasks, so the debugging check is still preserved.
Also rename the function to fpu__activate_fpstate(), because it's not
exclusively used for stopped tasks, but for the current task as well.
( Note that this bug calls for a cleaner separation of access-for-read
and access-for-modification FPU methods, but we'll do that in separate
patches. )
Reported-by: Bobby Powers <bobbypowers@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The copy_xregs_to_kernel*() and copy_kernel_to_xregs*() functions are used
to copy FPU registers to kernel memory and vice versa.
They are never expected to fail, yet they have a return code, mostly because
that way they can share the assembly macros with the copy*user*() functions.
This error code is then silently ignored by the context switching
and other code - which made the bug in:
b8c1b8ea7b ("x86/fpu: Fix FPU state save area alignment bug")
harder to fix than necessary.
So remove the return values and check for no faults when FPU debugging
is enabled in the .config.
This improves the eagerfpu context switching fast path by a couple of
instructions, when FPU debugging is disabled:
ffffffff810407fa: 89 c2 mov %eax,%edx
ffffffff810407fc: 48 0f ae 2f xrstor64 (%rdi)
ffffffff81040800: 31 c0 xor %eax,%eax
-ffffffff81040802: eb 0a jmp ffffffff8104080e <__switch_to+0x321>
+ffffffff81040802: eb 16 jmp ffffffff8104081a <__switch_to+0x32d>
ffffffff81040804: 31 c0 xor %eax,%eax
ffffffff81040806: 48 0f ae 8b c0 05 00 fxrstor64 0x5c0(%rbx)
ffffffff8104080d: 00
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's a confusing aspect of how xstate_fault() constraints are
handled by the FPU register/memory copying functions in
fpu/internal.h: they use "0" (0) to signal that the asm code
will not always set 'err' to a valid value.
But 'err' is already initialized to 0 in C code, which is duplicated
by the asm() constraint. Should the initialization value ever be
changed, it might become subtly inconsistent with the not too clear
asm() constraint.
Use 'err' as the value of the input variable instead, to clarify
this all.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two problems with xstate_fault handling:
- The xstate_fault() macro takes an argument, but that's
propagated into the assembly named label as well. This
is technically correct currently but might result in
failures if anytime a more complex argument is used.
So use a separate '_err' name instead for the label.
- All the xstate_fault() using functions have an error
variable named 'err', which is an output variable to
the asm() they are using. The problem is, it's not always
set by the asm(), in which case the compiler might
optimize out its initialization, so that the C variable
'err' might become corrupted after the asm() - confusing
anyone who tries to take advantage of this variable
after the asm(). Mark it an input variable as well.
This is a latent bug currently, but an upcoming debug
patch will make use of 'err'.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the xstate code was probably first copied from the fxregs code,
hence it carried over the 'fx' naming for the state pointer variable.
But this is slightly confusing, as we usually on call the (legacy)
MMX/SSE state 'fx', both in data structures and in the functions
build around FXSAVE/FXRSTOR.
So rename it to 'xstate' to make it more apparent what it is related to.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All the other register<-> memory copying functions are defined
in fpu/internal.h, so move the xstate variants there too.
Beyond being more consistent, this also allows FPU debugging
checks to be added to them. (Because they can now use the
macros defined in fpu/internal.h.)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While looking at xstate.h it took me some time to realize that
'xstate_fault' uses 'err' as a silent parameter. This is not
obvious at the call site, at all.
Make it an explicit macro argument, so that the syntactic
connection is easier to see. Also explain xstate_fault()
a bit.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fpu/internal.h has grown organically, with not much high level structure,
which hurts its readability.
Organize the various definitions into 5 sections:
- high level FPU state functions
- FPU/CPU feature flag helpers
- fpstate handling functions
- FPU context switching helpers
- misc helper functions
Other related changes:
- Move MXCSR_DEFAULT to fpu/types.h.
- drop the unused X87_FSW_ES define
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are various internal FPU state debugging checks that never
trigger in practice, but which are useful for FPU code development.
Separate these out into CONFIG_X86_DEBUG_FPU=y, and also add a
couple of new ones.
The size difference is about 0.5K of code on defconfig:
text data bss filename
15028906 2578816 1638400 vmlinux
15029430 2578816 1638400 vmlinux
( Keep this enabled by default until the new FPU code is debugged. )
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This cleans up the call sites and the function a bit,
and also makes it more symmetric with the other high
level FPU state handling functions.
It's still only valid for the current task, as we copy
to the FPU registers of the current CPU.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So call setup_xstate_comp() from the xstate init code, not
from the generic fpu__init_system() code.
This allows us to remove the protytype from xstate.h as well.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Put MPX support into its separate high level structure, and
also replace the fixed YMM, LWP and MPX structures in
xregs_state with just reservations - their exact offsets
in the structure will depend on the CPU and no code actually
relies on those fields.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Document all the structures that make up 'struct fpu'.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Improve the memory layout of 'struct fpu':
- change ->fpregs_active from 'int' to 'char' - it's just a single flag
and modern x86 CPUs can do efficient byte accesses.
- pack related fields closer to each other: often 'fpu->state' will not be
touched, while the other fields will - so pack them into a group.
Also add comments to each field, describing their purpose, and add
some background information about lazy restores.
Also fix an obsolete, lazy switching related comment in fpu_copy()'s description.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So much of fpu/core.c is the regset code, but it just obscures the generic
FPU state machine logic. Factor out the regset code into fpu/regset.c, where
it can be read in isolation.
This affects one API: fpu__activate_stopped() has to be made available
from the core to fpu/regset.c.
No change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fpu/xstate.c has a lot of generic FPU signal frame handling routines,
move them into a separate file: fpu/signal.c.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move restore_init_xstate() next to its sole caller.
Also rename it to copy_init_fpstate_to_fpregs() and add
some comments about what it does.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the handling of init_xstate_ctx has a layering violation: both
'struct xsave_struct' and 'union thread_xstate' have a
'struct i387_fxsave_struct' member:
xsave_struct::i387
thread_xstate::fxsave
The handling of init_xstate_ctx is generic, it is used on all
CPUs, with or without XSAVE instruction. So it's confusing how
the generic code passes around and handles an XSAVE specific
format.
What we really want is for init_xstate_ctx to be a proper
fpstate and we use its ::fxsave and ::xsave members, as
appropriate.
Since the xsave_struct::i387 and thread_xstate::fxsave aliases
each other this is not a functional problem.
So implement this, and move init_xstate_ctx to the generic FPU
code in the process.
Also, since init_xstate_ctx is not XSAVE specific anymore,
rename it to init_fpstate, and mark it __read_mostly,
because it's only modified once during bootup, and used
as a reference fpstate later on.
There's no change in functionality.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fpstate_init() only uses fpu->state, so pass that in to it.
This enables the cleanup we will do in the next patch.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Factor out the FPU error code handling code from traps.c and fpu/internal.h
and move them close to each other.
Also convert the helper functions to 'struct fpu *', which further simplifies
them.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Only a few places use the regset definitions, so factor them out.
Also fix related header dependency assumptions.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
yu-cheng yu