This is the first set of bugfixes for ARM SoCs, fixing a couple
of stability problems, mostly on TI OMAP and Rockchips platforms:
- OMAP2 hwmod clocks must be enabled in the correct order
- OMAP3 Wakeup from resume through PRM IRQ was unreliable
- One regression on OMAP5 caused by a kexec fix
- Rockchip ethernet needs some settings for stable operation on Rock64
- Rockchip based Chrombook Plus needs another clock setting for
stable display suspend/resume
- Rockchip based phyCORE-RK3288 was able to run at an invalid
CPU clock frequency
- Rockchip MMC link was sometimes unreliable
- Multiple fixes to avoid crashes in the Broadcom STB DPFE driver
Other minor changes include:
- Devicetree fixes for incorrect hardware description (rockchip,
omap, Gemini, amlogic)
- Some MAINTAINER file updates to correct email and git addresses
- Some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
cavium, qualcomm, hisilicon, zx)
- Fixes for LTO-compilation (orion, davinci, clps711x)
- One fix for an incorrect Kconfig errata selection
- A memory leak in the OMAP timer driver
- A kernel data leak in OMAP1 debugfs files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJalzTaAAoJEGCrR//JCVInBeQP/3wBXCnzfCkmSSliZHoNzgYB
XGkC+JIqw9AnHvn/ckvHMwUv8kQlbi7ImPXz1P8yafy3h2vHIdN2My0XYtRyQkNT
NoAxIXT+NiQx9sAoLGY8gWTN4Do63q1vw5SLmOEDD2GYzo1jao4s7J0mhFZopBLw
WkgHf8t4jRmoBDA4GEYcdJZS5shMydFDyb9CiiqNHVA4S4IL87XcPoJDpJmyVDZ4
vZVeccyhw0Xh0NJLzRIhVDGRN2pj1ayFFVodfRNTseRGf0QRexntiIyIHa2wOi1l
93IjJ3XgHuYEj0NNNpZiHV5OZxxRbQlTD/ji5L8j71lklVjIedJsJdWFUKiK53oh
ufQXTRZaVMmh4xcvihABSchg8vEXMqx4cZ/hj/+LIepDJM6GC39uGipg6enORVym
BuZpol8b1owABN461Bt2RfAVyXqJ7TRkdVy+RaP7RCsddLEcdKdI6HYi3aeDVmHQ
krvTrLQhRsDL4IHvi6rQDqyJMf5GDP4y7aInf7YzvJlbV2uU+M0ndiSHpGhw6vbG
brhc/n56U/waMPG8tOv9AB1+afARQOc4Fo9xg96PADA69SXn7Eq2dgf1D/ern8UQ
6KgNZ1hmmEHzkxsAXjEcStlmhpwk4lh4T0nSDbamsMRvZRNQaqmskMbmYYepIXKC
71k/Uwf4CQhMxe2aXIOo
=fcv0
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is the first set of bugfixes for ARM SoCs, fixing a couple of
stability problems, mostly on TI OMAP and Rockchips platforms:
- OMAP2 hwmod clocks must be enabled in the correct order
- OMAP3 Wakeup from resume through PRM IRQ was unreliable
- one regression on OMAP5 caused by a kexec fix
- Rockchip ethernet needs some settings for stable operation on
Rock64
- Rockchip based Chrombook Plus needs another clock setting for
stable display suspend/resume
- Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
clock frequency
- Rockchip MMC link was sometimes unreliable
- multiple fixes to avoid crashes in the Broadcom STB DPFE driver
Other minor changes include:
- Devicetree fixes for incorrect hardware description (rockchip,
omap, Gemini, amlogic)
- some MAINTAINER file updates to correct email and git addresses
- some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
cavium, qualcomm, hisilicon, zx)
- fixes for LTO-compilation (orion, davinci, clps711x)
- one fix for an incorrect Kconfig errata selection
- a memory leak in the OMAP timer driver
- a kernel data leak in OMAP1 debugfs files"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
MAINTAINERS: update entries for ARM/STM32
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
ARM: omap2: set CONFIG_LIRC=y in defconfig
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
ARM: orion: fix orion_ge00_switch_board_info initialization
ARM: davinci: mark spi_board_info arrays as const
ARM: clps711x: mark clps711x_compat as const
arm: zx: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: cavium: fix PCI bus dtc warnings
MAINTAINERS: ARM: at91: update my email address
soc: imx: gpc: de-register power domains only if initialized
ARM: dts: rockchip: Fix DWMMC clocks
...
On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
struct efi_uga_draw_protocol *uga = NULL, *first_uga;
efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
unsigned long nr_ugas;
- u32 *handles = (u32 *)uga_handle;;
+ u32 *handles = (u32 *)uga_handle;
efi_status_t status = EFI_INVALID_PARAMETER;
int i;
This patch is the result of the following script:
$ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)
... followed by manual review to make sure it's all good.
Splitting this up is just crazy talk, let's get over with this and just do it.
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If power domain information are missing in the device tree, no
power domains get initialized. However, imx_gpc_remove tries to
remove power domains always in the old DT binding case. Only
remove power domains when imx_gpc_probe initialized them in
first place.
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A number of new drivers get added this time, along with many low-priority
bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with
the TEE is added
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=yz0k
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A number of new drivers get added this time, along with many
low-priority bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC
types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM
SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with the
TEE is added"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
of: platform: fix OF node refcount leak
soc: fsl: guts: Add a NULL check for devm_kasprintf()
bus: ti-sysc: Fix smartreflex sysc mask
psci: add CPU_IDLE dependency
soc: xilinx: Fix Kconfig alignment
soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
soc: bcm: brcmstb: Be multi-platform compatible
soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
Revert "soc: brcmstb: Only register SoC device on STB platforms"
bus: omap: add MODULE_LICENSE tags
soc: brcmstb: Only register SoC device on STB platforms
tee: shm: Potential NULL dereference calling tee_shm_register()
soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
soc: xilinx: Create folder structure for soc specific drivers
of: platform: populate /firmware/ node from of_platform_default_populate_init()
soc: samsung: Add SPDX license identifiers
soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
tee: shm: don't put_page on null shm->pages
...
This adds new SoC support and more error path handling to the guts
driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaZm0uAAoJEIbcUA77rBVUHCIQAMQTD+kO2gUWhMsC2LOsU366
NKWiDU4xw48umFil56OLCEalIX/nBDZqL7PYpptFBDURIjychjj1J/M/oHra+EDj
S+/a53gBBNVb7rn9w+H8sfVbGCSK4Wv+S2L9KrIrZEzqFahSld9R5UAf63S4OZLp
zzrPqmsrXQI4JkHmJF1LAxPDoHIeaNI4HQiFnKuVQWEZYFh80r1x04pAh8A45mrN
0jZd+853VaCq8HQSUGeLNn6o7SCYZOdSun7wNrgLrc0ilM0JNeMKfm/A8uCB4C6p
yPJL5M+33k9at2plUNmA/gVw3pHoOt4Huwu+yGYbhyTVct8z2jL96ZrgG1niklG9
8fN8otbSUyvm2eTY+VHinoFtod2z+s7lXZc8+rGkfhLJDu1A6/6jRA1lwiubUKDf
mJ1JhBk6kJ7yDqanKsw6SSYA0ptCPpsxVlkNbWgc7TAgwWf/Soy1gfQQWqjuXaz0
jcFhHUPgeP9gEgxZMjqwwvnrxSG+sCRy3qHdkH3S/x06qbcU4rHCXLS8CeiDAy1M
pAN741ERND3tPFhfdnbpEe58rkhnvZcbF6nEkviaimQ5y11xlw0TvwX18pKkcwA2
u79KB6ZxxeIKBqZNR0DXb42uOW8xhCcXdglKYcfEYDUxRyfDHNUPphULbhpFTSp5
G0AefICjtKRsrxoZUaiK
=2hOy
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
Pull "FSL/NXP SoC drivers updates for 4.16" from Li Yang:
This adds new SoC support and more error path handling to the guts
driver.
* tag 'soc-fsl-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: guts: Add a NULL check for devm_kasprintf()
soc: fsl: support GUTS driver for ls1012a/ls1046a
devm_kasprintf() may fail, so we should better add a NULL check
and propagate an error on failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Currently clkoutdiv is being operated on by a logical && operator rather
than a bitwise & operator. This looks incorrect as these should be bit
flag operations.
Addresses-Coverity-ID: 1463959 ("Logical vs. bitwise operator")
Fixes: cee8113a29 ("soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Dhaval Shah <dshah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
xlnx_vcu driver uses devm_ioremap_nocache, which is included
only when HAS_IOMEM is enabled.
drivers/soc/xilinx/xlnx_vcu.o: In function `xvcu_probe':
xlnx_vcu.c:(.text+0x116): undefined reference to `devm_ioremap_nocache'
xlnx_vcu.c:(.text+0x1ae): undefined reference to `devm_ioremap_nocache'
Signed-off-by: Dhaval Shah <dshah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
We were making a bunch of wrong assumptions that turned out to blow out
on non-Broadcom STB platforms:
- we would return -ENODEV from brcmstb_soc_device_early_init() if we
could not find the sun_top_ctrl device node, this is not an error
in the context of a multi-platform kernel
- we would still try to register the Broadcom STB SoC device, even if we
are not running on such a platform
While at it, also fix the sun_top_ctrl device_node leaks while we change
the flow of brcmstb_soc_device_init() and
brcmstb_soc_device_early_init().
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Thierry Reding <treding@nvidia.com>
[florian: Combine all of Thierry's patch in one go for easier review]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently if this driver is included, we get the following warning
on any platforms irrespective of whether it's brcmstb platform or not.
"
brcmstb: biuctrl: missing BIU control node
brcmstb: biuctrl: MCP: Unable to disable write pairing!
"
This patch allows to exit early without any warning messages on non
brcmstb platforms as it's meaningless for them.
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[florian: Add fixes tag, make initcall non fatal]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 23a0d84799.
Patch has issues that's being addressed by the Florian and he will
follow up with a new patch to address the original issue.
Signed-off-by: Olof Johansson <olof@lixom.net>
After moving the SoC device initialization to an early initcall in
commit f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall"),
the Broadcom STB SoC device is registered on all platforms if support
for the device is enabled in the kernel configuration.
This causes an additional SoC device to appear on platforms that already
register a native one. In case of Tegra the STB SoC device is registered
as soc0 (with totally meaningless content in the sysfs attributes) and
causes various scripts and programs to fail because they don't know how
to parse that data.
To fix this, duplicate the check from brcmstb_soc_device_early_init()
that already prevents the code from doing anything nonsensical on non-
STB platforms.
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Xilinx ZYNQMP logicoreIP Init driver is based on the new
LogiCoreIP design created. This driver provides the processing system
and programmable logic isolation. Set the frequency based on the clock
information get from the logicoreIP register set.
Signed-off-by: Dhaval Shah <dshah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
- Update i.MX GPC driver to support PCI power domain of i.MX6SX SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaTCqGAAoJEFBXWFqHsHzOavcH/1g0k3tN4MaOvf44lSDm5uCZ
WqCKLN01f8T02YegdcgVVc59wirJB6xKIYD86dQIiVC8gEfMOhvfEuv6qkPRHQOM
WVYJTIFFisEeypnXEHjD2SwN6/SskSGPMUDpfj0hveb0srLnCQou+5Ty8zpvmAdl
XEAP9mjK7s6ovfomfuxEY4iWxGRKbDXtwXqtvYTI3tpXwn/c6LXgdrg02xC/KAXp
sKXbS0NbYjBDHBd8hPcVVwujugw3UZHr/saYYf0rmC7WKr7074WylSWW08aKQ89u
Elv5fNeoAYrlnwpeoqzLqcgrvhCJcpx0HTVnYjmNIVLYRLAktYu6glR7icAdpb8=
=kB/f
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
Pull "i.MX drivers update for 4.16" from Shawn Guo:
- Update i.MX GPC driver to support PCI power domain of i.MX6SX SoC.
* tag 'imx-drivers-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Add i.MX6SX PCI power domain
* rcar-sysc: Keep wakeup sources active during system suspend
Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
must be kept active during system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources."
-----BEGIN PGP SIGNATURE-----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=0tvJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.16
* rcar-sysc: Keep wakeup sources active during system suspend
Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
must be kept active during system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources."
* tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
Signed-off-by: Olof Johansson <olof@lixom.net>
The SPS power domain driver is extended for S700 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=u1IY
-----END PGP SIGNATURE-----
Merge tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers
Actions Semi SoC drivers for v4.16
The SPS power domain driver is extended for S700 SoC.
* tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: sps: Add S700
Signed-off-by: Olof Johansson <olof@lixom.net>
4.16, please pull the following:
- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
print the time to make it more future proof
- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
work on newer ARM64-based chips, as well as perform the correct interface tuning
for these chips to reach the expected performance
-----BEGIN PGP SIGNATURE-----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=RHHM
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux into next/drivers
This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for
4.16, please pull the following:
- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
print the time to make it more future proof
- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
work on newer ARM64-based chips, as well as perform the correct interface tuning
for these chips to reach the expected performance
* tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: biuctrl: Move to early_initcall
soc: brcmstb: Split initialization
soc: brcmstb: biuctrl: Fine tune B53 MCP interface settings
soc: brcmstb: biuctrl: Wire-up new registers
soc: brcmstb: biuctrl: Prepare for saving/restoring other registers
soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs
soc: brcmstb: Make CPU credit offset more parameterized
dt-bindings: arm: brcmstb: Correct BIUCTRL node documentation
dt-bindings: arm: Add entry for Broadcom Brahma-B53
firmware: raspberrypi: print time using time64_t
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds an SoC driver for the Gemini. Currently there
is only one thing not fitting into any other framework,
and that is the bus arbitration setting.
All Gemini vendor trees seem to be setting this register to
exactly the same arbitration so we just add a small code
snippet to do this at subsys_init() time before any other
drivers kick in.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add a jump target so that a specific error message is stored only once
at the end of this function implementation.
* Replace two calls of the function "dev_err" by goto statements.
* Adjust two condition checks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
i.MX6SX has a PCI power domain in PGC. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
-----BEGIN PGP SIGNATURE-----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=5u17
-----END PGP SIGNATURE-----
Merge tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc
Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger:
- change kconfig entry for armv7 SoCs to be more generic
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
* tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: add MT2712 scpsys support
soc: mediatek: add dependent clock jpgdec/audio for scpsys
soc: mediatek: extend bus protection API
dt-bindings: soc: add MT2712 power dt-bindings
ARM: mediatek: use more generic prompts for SoCs with ARMv7
Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.
This also contains a couple of fixes for reading fuses on Tegra20.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlo73FITHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoXFYD/9LdBMkXZdG8ftCyKhIrdmT8HoGCVMc
Hq1H4oY1DEwkUGf+98dP+E5M9OqH/s7VzCqzb5OSzkroVplvTVe6x40ZGdAVP6AN
SEsHIJSZ1gssuQdJVqh4mZcz4YdT33qlQ8Y64ur4m7GPwwz8nwWDLcDVufNlPpra
RrcqG+hDj85D61wP/QKmeUgow3eTLfW1rxV6Vu7mj9LrrKXt92qE6JAlGRmRfxxH
XmUa9GoXfHxBu2jGJHotL7TGwUTkSEGk7F78b1g8n9s38cohYNTbOjxdw1468nZY
Y5wwJUNZqY1bJJB6mCEDOqcufsKCZr6yGSvoHZUWC2NeXsOHSzqSZQD6bR9jDygH
TMaCSlYVOw4Rbj5WJPLvbFj5kyhuDx1ATR9xoVBkleX3npu+KtwzQaK8rRtUP81/
yXcSxt4BKAfLAMloR1ycw13yMXAzu7jZhZYCOT61GBsQ45AgCMy5XBwV9TBitIdN
+ScsZ+QZd31Lt6Sq4KEZZHqaKMWqFXezW9GeqmvOE+uVzfA8TLtO8ud5OeP5c6bU
c5oe4Oy3HmjG8HzQErdjr/eBAlONwEBKFw3o4GVNb0R9x20SysqlP91wKDfgBM9k
32ZWTF10QXxebY92WneEjLImJeU/U0iHkmNS4tpQC1Egi7tvqkGGh6HnXVt11hk9
cr4ElWaSu1cuaQ==
=3l9M
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "soc/tegra: Changes for v4.16-rc1" from Thierry Reding:
Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.
This also contains a couple of fixes for reading fuses on Tegra20.
* tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver
soc/tegra: fuse: Fix reading registers using DMA on Tegra20
soc/tegra: pmc: Consolidate Tegra186 support
soc/tegra: pmc: Parameterize driver
soc/tegra: fuse: Add Tegra186 chip ID support
soc/tegra: fuse: Warn if accessing unmapped registers
soc/tegra: fuse: Move register mapping check
soc/tegra: fuse: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
Currently fuse driver requests DMA channel from an arbitrary DMA device,
it is not a problem since there is only one DMA provider for Tegra20 yet,
but it may become troublesome if another provider will appear.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
FUSE driver doesn't configure DMA channel properly, because of it DMA
transfer is never issued and tegra20_fuse_read() always return 0x0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
* Identify R-Car M3-W ES1.1
Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1
incorrectly identifies the SoC revision as ES2.0. Add a workaround to
fix this."
It is my understanding that this is likely to be forwards-compatibile.
-----BEGIN PGP SIGNATURE-----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=eL6d
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Updates for v4.16" from Simon Horman:
* Identify R-Car M3-W ES1.1
Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1
incorrectly identifies the SoC revision as ES2.0. Add a workaround to
fix this."
It is my understanding that this is likely to be forwards-compatibile.
* tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: Identify R-Car M3-W ES1.1
There are dependent clock jpgdec/audio in scpsys on MT2712,
and will exist three dependent clocks on MT2712 VDEC.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT2712 add "set/clear" bus control register to each control register set
instead of providing only one "enable" control register, we could avoid
the read-modify-write racing by declaring "bus_prot_reg_update" as "false"
in scp_soc_data or declaring as "true" to use the legacy update method.
By improving the mtk-infracfg bus protection implementation to
support set/clear bus protection control method by IC configuration.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Being called during early_initcall() is early enough that it occurs
before SMP initialization, which is all we care about for the Bus
Interface Unit configuration.
This solves lack of BIU initialization on ARM64 platforms where we do
not have an anchor where to put the BIU initialization (since there are
no machine descriptors).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We may need access to family_id and product_id fairly early on boot for
other parts of the code (e.g: biuctrl.c), so split the initialization
between an early_init() and an arch_initcall() which allows us to do
that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to achieve expected MCP bus throughput on 3 particular chips:
7268, 7271 and 7278, do the appropriate programming of the MCP
interface: increase number of MCP write credits, turn on write-back
throttling when present.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add definitions for B53 systems register: CPU_MCP_FLOW_REG and
CPU_WRITEBACK_CTRL_REG. These register will be saved and restored
accordingly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In preparation for saving/restoring additional registers required on
some newer platforms (7268, 7271, 7278), migrate the code to use enums
and helper functions to access registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
On Broadcom Brahma-B53 CPUs, the CPU_CREDIT_REG offset got moved to
0x0b0 instead of 0x184, correct this such that we correcty
enable/disable write-pairing for these chips.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In preparation for fixing and changing values in the CPU_CREDIT_REG
register for B53-based systems, make the offset parameterized.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Drivers that needs to communicate with a remote QMI service all has to
perform the operations of discovering the service, encoding and decoding
the messages and operate the socket. This introduces an abstraction for
these common operations, reducing most of the duplication in such cases.
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the helper library for encoding and decoding QMI encoded messages.
The implementation is taken from lib/qmi_encdec.c of the Qualcomm kernel
(msm-3.18).
Modifications has been made to the public API, source buffers has been
made const and the debug-logging part was omitted, for now.
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Attempt to acquire the APCS IPC through the mailbox framework and fall
back to the old syscon based approach, to allow us to move away from
using the syscon.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/rmtfs_mem.o
see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
Note that the original premature free of the parent node has already
been fixed separately.
Also note that this pattern of looking up the first child node with a
given property is rare enough that a generic helper is probably not
warranted.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Fixes: 3e8b554114 ("soc: qcom: smsm: fix of_node refcnting problem")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If an R-Car SYSC slave device is part of the CPG/MSTP or CPG/MSSR Clock
Domain and to be used as a wakeup source, it must be kept active during
system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
If source string longer than max, kstrndup will alloc max+1 space.
So, we should make sure the result will not over limit.
Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Linus Torvalds