Commit Graph

656 Commits

Author SHA1 Message Date
Tom Tucker 922a8e9fb2 RDMA: iWARP Connection Manager.
Add an iWARP Connection Manager (CM), which abstracts connection
management for iWARP devices (RNICs).  It is a logical instance of the
xx_cm where xx is the transport type (ib or iw).  The symbols exported
are used by the transport independent rdma_cm module, and are
available also for transport dependent ULPs.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:46 -07:00
Roland Dreier 3cd965646b IB: Whitespace fixes
Remove some trailing whitespace that has snuck in despite the best
efforts of whitespace=error-all.  Also fix a few other whitespace
bogosities.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:46 -07:00
Sean Hefty f06d265375 IB/cm: Randomize starting comm ID
Randomize the starting local comm ID to avoid getting a rejected
connection due to a stale connection after a system reboot or
reloading of the ib_cm.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:45 -07:00
James Lentini 2b3e258e5d IB/mad: Remove unused includes
The ib_mad module does not use a kthread function, but mad_priv.h
includes <linux/kthread.h>.  mad_rmpp.c does not do any DMA-related
stuff, but includes <linux/dma-mapping.h>.  Remove the unused includes.

Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:44 -07:00
Sean Hefty 75ab13443e IB/mad: Add support for dual-sided RMPP transfers.
The implementation assumes that any RMPP request that requires a
response uses DS RMPP.  Based on the RMPP start-up scenarios defined
by the spec, this should be a valid assumption.  That is, there is no
start-up scenario defined where an RMPP request is followed by a
non-RMPP response.  By having this assumption we avoid any API
changes.

In order for a node that supports DS RMPP to communicate with one that
does not, RMPP responses assume a new window size of 1 if a DS ACK has
not been received.  (By DS ACK, I'm referring to the turn-around ACK
after the final ACK of the request.)  This is a slight spec deviation,
but is necessary to allow communication with nodes that do not
generate the DS ACK.  It also handles the case when a response is sent
after the request state has been discarded.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:44 -07:00
Sean Hefty 76842405fc IB/cm: Use correct reject code for invalid GID
Set the reject code properly when rejecting a request that contains an
invalid GID.  A suitable GID is returned by the IB CM in the
additional reject information (ARI).  This is a spec compliancy issue.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:43 -07:00
Sean Hefty c1f250c0b4 IB/cm: Enable atomics along with RDMA reads
Enable atomic operations along with RDMA reads if a local RDMA
read/atomic depth is provided by the user.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:42 -07:00
Jack Morgenstein 9e583b85c2 IB/mthca: Return correct number of bits for static rate in query_qp
Incorrect number of bits was taken for static_rate field.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:42 -07:00
Jack Morgenstein f6f76725b5 IB/mthca: Return port number for unconnected QPs in query_qp
port_num was not being returned for unconnected QPs.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:41 -07:00
Jack Morgenstein b046a04e16 IB/mthca: Fix default static rate returned for Tavor in AV
When default static rate is returned for Tavor, need to translate it
to an ib rate value.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:40 -07:00
Bryan O'Sullivan 30fc5c3130 IB/ipath: control receive polarity inversion
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:40 -07:00
Bryan O'Sullivan e35d710d0c IB/ipath: fix return value from ipath_poll
This stops the generic poll code from waiting for a timeout.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:39 -07:00
Bryan O'Sullivan d821f02a6e IB/ipath: allow SMA to be disabled
This is useful for testing purposes.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:39 -07:00
Bryan O'Sullivan a78aa6fb15 IB/ipath: handle sq_sig_all field correctly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:38 -07:00
Bryan O'Sullivan 0b81e4f79a IB/ipath: put a limit on the number of QPs that can be created
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:38 -07:00
Bryan O'Sullivan ca4ce383ac IB/ipath: validate path_mig_state properly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:37 -07:00
Bryan O'Sullivan fc8cf8cdfc IB/ipath: be more strict about testing the modify QP verb
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:36 -07:00
Bryan O'Sullivan ff0b8597ec IB/ipath: add serial number to hardware freeze error message
Also added the word "Hardware" after "Fatal" to make it more obvious
that it's hardware, not software.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:36 -07:00
Bryan O'Sullivan 525d0ca1d4 IB/ipath: support new QLogic product naming scheme
This patch only renames files, fixes product names, and updates
comments.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:35 -07:00
Bryan O'Sullivan 092260b8f9 IB/ipath: account for attached QPs correctly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:35 -07:00
Bryan O'Sullivan eae33d47a7 IB/ipath: do not allow use of CQ entries with invalid counts
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:34 -07:00
Bryan O'Sullivan 98341f2618 IB/ipath: add new minor device to allow sending of diag packets
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:34 -07:00
Bryan O'Sullivan 32c0a26c8f IB/ipath: trivial cleanups
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:33 -07:00
Bryan O'Sullivan 0fd41363e0 IB/ipath: remove stale references to userspace SMA
When we first submitted a userspace subnet management agent, it was
rejected, so we left it out of the final driver submission.  This patch
removes a number of vestigial references to it.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:32 -07:00
Bryan O'Sullivan b55f4f06c8 IB/ipath: simplify debugging code after ipath_core and ib_ipath merger
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:31 -07:00
Bryan O'Sullivan 34b2aafea3 IB/ipath: simplify layering code
A lot of ipath layer code was only called in one place. Now that the
ipath_core and ib_ipath drivers are merged, it's more sensible to simply
inline the simple stuff that the layer code was doing.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:31 -07:00
Bryan O'Sullivan b1c1b6a30e IB/ipath: merge ipath_core and ib_ipath drivers
There is little point in keeping the two drivers separate, so we are
merging them.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:30 -07:00
Bryan O'Sullivan 367fe711c5 IB/ipath: drop requirement that PIO buffers be mmaped write-only
Some userlands try to mmap these pages read-write, so accommodate them.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:29 -07:00
Bryan O'Sullivan ba11203a11 IB/ipath: fix handling of kpiobufs
Change comment: no longer imply that user can set ipath_kpiobufs to zero.
Actually set ipath_kpiobufs from parameter. Previously only altered
per-device ipath_lastport_piobuf, which was over-written in chip init.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:28 -07:00
Bryan O'Sullivan 8e280d94e2 IB/ipath: fix for crash on module unload, if cfgports < portcnt
Allocate enough pointers for all possible ports, to avoid problems in
cleanup/unload.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:27 -07:00
Bryan O'Sullivan c27fef2627 IB/ipath: lock resource limit counters correctly
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:27 -07:00
Bryan O'Sullivan eb9dc6f48d IB/ipath: More changes to support InfiniPath on PowerPC 970 systems
Ordering of writethrough store buffers needs to be forced, and we need
to use ifdef to get writethrough behavior to InfiniPath buffers, because
there is no generic way to specify that at this time (similar to code
in char/drm/drm_vm.c and block/z2ram.c).

Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:26 -07:00
Ralph Campbell 373d991580 IB/ipath: Performance improvements via mmap of queues
Improve performance of userspace post receive, post SRQ receive, and
poll CQ operations for ipath by allowing userspace to directly mmap()
receive queues and completion queues.  This eliminates the copying
between userspace and the kernel in the data path.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:26 -07:00
Ralph Campbell 9bc57e2d19 IB/uverbs: Pass userspace data to modify_srq and modify_qp methods
Pass a struct ib_udata to the low-level driver's ->modify_srq() and
->modify_qp() methods, so that it can get to the device-specific data
passed in by the userspace driver.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:25 -07:00
Ralph Campbell 64f817ba98 IB/uverbs: Allow resize CQ operation to return driver-specific data
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level
drivers can return data from a resize CQ operation to userspace.  Have
ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump
the userspace ABI.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:24 -07:00
Heiko J Schick fab97220c9 IB/ehca: Add driver for IBM eHCA InfiniBand adapters
Add a driver for IBM GX bus InfiniBand adapters, which are usable with
some pSeries/System p systems.

Signed-off-by: Heiko J Schick <schickhj.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:22:22 -07:00
Ishai Rabinovitz ded7f1a16d IB/srp: Add port/device attributes
Add local_ib_device and local_ib_port attributes to srp scsi_host.
These are needed when we want to connect to the same target through
multiple distinct ports.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:21 -07:00
James Lentini 2a214182d2 IB/mthca: Include the header we really want
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:20 -07:00
Roland Dreier 1ccf6aa19a IB/uverbs: Fix lockdep warning when QP is created with 2 CQs
Lockdep warns when userspace creates a QP that uses different CQs for
send completions and receive completions, because both CQs are locked
and their mutexes belong to the same lock class.  However, we know
that the mutexes are distinct and the nesting is safe (there is no
possibility of AB-BA deadlock because the mutexes are locked with
down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to
get rid of the lockdep warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:20 -07:00
Roland Dreier ab10867621 IB/uverbs: Use idr_read_cq() where appropriate
There were two functions that open-coded idr_read_cq() in terms of
idr_read_uobj() rather than using the helper.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:19 -07:00
Michael S. Tsirkin 9217b27b12 IB/ipoib: Fix flush/start xmit race (from code review)
Prevent flush task from freeing the ipoib_neigh pointer, while
ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it
has loaded from the skb's hardware address.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:18 -07:00
Michael S. Tsirkin 9fd558f454 IB/mthca: Don't use privileged UAR for kernel access
Make kernel use UAR2 instead of UAR1 for hardware access: this adds
sanity checking from the hardware side, without any performance cost.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:18 -07:00
Jack Morgenstein b27075735e IB/mthca: Fix lid used for sending traps
The SM LID used to send traps to is incorrectly set to port LID.  This
is a regression from 2.6.17 -- after a PortInfo MAD is received, no
traps are sent to the SM LID.  The traps go to the loopback interface
instead, and are dropped there.  The SM LID should be taken from the
sm_lid of the PortInfo response.

The bug was introduced by commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5:
	IB/mthca: Add client reregister event generation

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22 15:17:17 -07:00
Michael S. Tsirkin d5bb75999c RDMA/cma: Increase the IB CM retry count in CMA
3 seems like a low number of IB Communication Manager retries to set;
we see connections failing under stress, and in any case 3 just looks
like an arbitrary number.  15 is the max value allowed by the
InfiniBand spec.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-14 13:55:30 -07:00
Eli Cohen c11bd42a76 IPoIB: Retry failed send-only multicast group joins
When a send-only multicast group join fails, mcast->query must be set
to NULL.  Otherwise, IPoIB will never retry the join and the multicast
group will never be reachable.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-14 13:51:41 -07:00
Ishai Rabinovitz add7afc756 IB/srp: Don't schedule reconnect from srp
If there is a problem in the connection, the SCSI mid-layer will
eventually call srp_reset_host(), which will call srp_reconnect(), so
we do not need to schedule a call to srp_reconnect_work() from
srp_completion().

Removing this prevents srp_reset_host() from failing if a reconnect
scheduled from srp_completion() is already in progress, which in turn
was causing crashes as both SCSI midlayer and srp_reconnect() were
cancelling commands.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-14 13:51:40 -07:00
Roland Dreier 5a4e6dccbc IB/mthca: Use IRQ safe locks to protect allocation bitmaps
It is supposed to be OK to call mthca_create_ah() and mthca_destroy_ah()
from any context.  However, for mem-full HCAs, these functions use the
mthca_alloc() and mthca_free() bitmap helpers, and those helpers use
non-IRQ-safe spin_lock() internally.  Lockdep correctly warns that
this could lead to a deadlock.  Fix this by changing mthca_alloc() and
mthca_free() to use spin_lock_irqsave().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-31 17:25:56 -07:00
Greg Kroah-Hartman f834c75542 Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2006-08-26 13:04:23 -07:00
Michael S. Tsirkin 834ac73d4b IB/mthca: Update HCA firmware revisions
Update the driver's list of HCA firmware revisions to make sure people
running Sinai firmware older than 1.1.0 get a message suggesting a
firmware upgrade.  Update the Arbel versions as well while we are at it.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-23 13:29:08 -07:00
Roland Dreier 5beba53230 IB/mthca: No userspace SRQs if HCA doesn't have SRQ support
Leave all SRQ methods out of the device's uverbs_cmd_mask if the
device doesn't have SRQ support (because of ancient firmware) so that
we don't allow userspace to call the driver's create_srq method.  This
fixes a userspace-triggerable oops caused by ib_uverbs_create_srq()
following the device's ->create_srq function pointer, which will be
NULL if the device doesn't support SRQs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-18 10:41:46 -07:00