Commit Graph

343 Commits

Author SHA1 Message Date
Adrian Bunk 9d921116cc Input: serio - fix memory leak
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:13:29 -05:00
Richard Purdie 4872f78888 Input: zaurus keyboard driver updates
* Change the scan interval from 100ms to 50ms. This stops the key
    repeat from triggering on double letter presses.
  * Remove unneeded stale hinge code from corgikbd
  * Change unneeded corgi GPIO pins to inputs when suspended
  * Add support for the headphone jack switch for both corgi and spitz
    (as switch SW_2)

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:12:32 -05:00
Bjorn Helgaas 2bfc3c6e95 Input: i8042 - fix logic around pnp_register_driver()
Do not assume that pnp_register_driver() returns the number of
devices claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:12:24 -05:00
Bjorn Helgaas dd55563f63 Input: ns558 - fix logic around pnp_register_driver()
Do not assume that pnp_register_driver() returns the number of
devices claimed.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:12:08 -05:00
Michael Neuling e5c6c8e457 Input: pcspkr - separate device and driver registration
The current pcspkr code combines the device and driver registration.
This patch splits these, putting the device registration in the arch
specific code.

PowerPC and MIPS only have the pcspkr present sometimes.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:11:50 -05:00
Dmitry Torokhov aaef685d57 Input: atkbd - allow disabling on X86_PC (if EMBEDDED)
Allow disabling atkbd driver if CONFIG_EMBEDDED is enabled. Previously
it was impossible to disable atkbd on X86_PC.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:10:23 -05:00
Vojtech Pavlik 380e19e2d8 Input: atkbd - disable softrepeat for dumb keyboards
Do not activate softrepeat by default on dumb keyboards as it clashes
with their own hardware repeat (for example Dell DRAC3). Softrepeat
can still be activated manually via module parameter or sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:10:08 -05:00
Vojtech Pavlik 9b104c12f1 Input: atkbd - fix complaints about 'releasing unknown key 0x7f'
Fix bat_xl and err_xl logic causing atkbd to complain about 'unknown
key 0x7f'. Noted by Ben LaHaise.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:09:52 -05:00
Eric Sesterhenn b39787a972 Input: use kzalloc() throughout the code
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:09:16 -05:00
Dmitry Torokhov 58a343f22e Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-03-13 23:36:52 -05:00
Dmitry Torokhov 8bd0ee93fe [PATCH] Input: psmouse - disable autoresync
Automatic resynchronization in psmouse driver causes problems on some
hardware so disable it by default for now. People with KVM switches
that require resync can still enable it via module parameter or sysfs
attribute.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-10 22:09:33 -08:00
Dmitry Torokhov 51c38f9bce Input: initialize serio and gameport at subsystem level
Serio and gameport cores do not depend on other drivers and are
used by code living outside of drivers/input/{gameport|serio}.
Registering them at subsystem level guarantees that they are
fully initialized before anyone tries to use them.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:51 -05:00
Dmitry Torokhov 221979aad6 Input: uinput - semaphore to mutex conversion
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:36 -05:00
Ingo Molnar 72ba9f0ce0 Input: joysticks - semaphore to mutex conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Amijoy conversion was done by Arjan van de Ven.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:30 -05:00
Ingo Molnar 33d3f07ae1 Input: atkbd - semaphore to mutex conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:18 -05:00
Ingo Molnar c14471dc2e Input: psmouse - semaphore to mutex conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:11 -05:00
Arjan van de Ven 286295eb93 Input: gameport - semaphore to mutex conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:03 -05:00
Arjan van de Ven c4e32e9faa Input: serio - semaphore to mutex conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:21:55 -05:00
Jes Sorensen e676c232e6 Input: input core - semaphore to mutex conversion
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:21:46 -05:00
Arthur Othieno 02860ab6cd Input: kill remnants of 98kbd{,-io} and 98spkr
98kbd{,-io} and 98spkr all went out with PC98 subarch.  Remove stale Makefile
entries that remained.

Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15 00:49:48 -05:00
David Brownell d93f70b2d7 Input: ads7846 - assorted updates
This updates the ads7846 touchscreen driver:
  - to allow faster clocking (this driver doesn't push sample rates);
  - bugfixes the conversion of spi_transfer to lists;
  - some dma-unsafe command buffers are fixed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15 00:49:35 -05:00
Dmitry Torokhov a90f7e98b7 Input: ads7846 - convert to to dynamic input_dev allocation
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15 00:49:22 -05:00
Dmitry Torokhov b8044c74bc Input: trackpoint - enable devices connected to external port
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15 00:49:09 -05:00
Meelis Roos 50f6dde0ad Input: logips2pp - add new signature (99)
Add Logitech mouse type 99 (Premium Optical Wheel Mouse, model M-BT58,
plain 3 buttons + wheel) to cure the following message: logips2pp: Detected
unknown logitech mouse model 99

Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15 00:48:58 -05:00
Alessandro Zummo a09d31ff76 Input: ixp4xx-beeper - fix compile error
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15 00:48:40 -05:00
Linus Torvalds d20e6336ea Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input 2006-01-31 21:18:17 -08:00
Dmitry Torokhov 97d4ebfe79 Input: iforce - fix detection of USB devices
Recent conversion to wait_event_interruptible_timeout() caused
USB detection routine erroneously report timeouts for perfectly
working devices.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-31 01:31:07 -05:00
Dmitry Torokhov 275c6ce25d Input: a3d - convert to dynamic input_dev allocation
Also set .owner in driver structure so we'll have a link between
module and driver in sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:52:39 -05:00
Dmitry Torokhov 4d462b9e23 Input: tmdc - handle errors from input_register_device()
Also set .owner in driver structure so we'll have a link between
module and driver in sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:52:26 -05:00
Dmitry Torokhov ab52cd66ae Input: turbografx - handle errors from input_register_device()
Also tgfx_remove shouldn't be marked __exit as it is also called from
__init code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:52:18 -05:00
Dmitry Torokhov 77fc46ca5b Input: gamecon - handle errors from input_register_device()
Also gc_remove shouldn't be marked __exit as it is also called from
__init code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:52:11 -05:00
Dmitry Torokhov c7fd018d75 Input: gamecon - fix crash when accessing device
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:52:04 -05:00
Dmitry Torokhov 07cf779c00 Input: sidewinder - handle errors from input_register_device()
Also set .owner in driver structure so we'll have a link between
module and driver in sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:56 -05:00
Zinx Verituse 847fd5fbf7 Input: sidewinder - fix an oops
Dynalloc conversion strikes again...

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:51 -05:00
Dmitry Torokhov 2e9d675ed2 Input: db9 - handle errors from input_register_device()
Also db9_remove shouldn't be marked __exit as it is also called from
__init code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:36 -05:00
Dmitry Torokhov 84c61896bd Input: db9 - fix possible crash with Saturn gamepads
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:31 -05:00
Dmitry Torokhov 0399addd71 Input: grip - handle errors from input_register_device()
Also set .owner in driver structure so we'll have a link between
module and driver in sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:21 -05:00
Dmitry Torokhov 3575c34100 Input: grip - fix crash when accessing device
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:16 -05:00
Adrian Bunk ffc6b529e8 Input: make needlessly global code static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:51:07 -05:00
Kimball Murray 74570d413c Input: mousedev - fix memory leak
Apparently, "while true; do cat </dev/null >/dev/input/mice; done" causes
an OOM in a short amount of time. Funny that nobody noticed, it actually
is very easy to trigger just by switching between VT1 and VT7...

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:50:59 -05:00
Alexey Dobriyan 5ae08f80ec Input: iforce - do not return ENOMEM upon successful allocation
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:50:52 -05:00
Dmitry Torokhov a3f3f31766 Input: psmouse - set name for Genius mice
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:50:46 -05:00
Alessandro Zummo 0138795902 Input: add ixp4xx beeper driver
This is a driver for beeper found in LinkSys NSLU2 boxes. It should work
on any ixp4xx based platform.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-29 21:50:40 -05:00
Russell King f43aaba191 [ARM] Convert request_irq+set_irq_type to request_irq with SA_TRIGGER
There's no need to have request_irq followed by set_irq_type.
Just use request_irq with the appropriate SA_TRIGGER flags.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-19 12:26:57 +00:00
Paul Mundt 0025835cf2 [PATCH] sh: consolidate hp620/hp680/hp690 targets into hp6xx
Most of the reasons for keeping these separate before was due to hp690
discontig, and since we have a workaround for that now (abusing some shadow
space so everything is magically contiguous), there's no reason to keep the
targets separate.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:27 -08:00
Linus Torvalds 61b7efddc5 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6 2006-01-14 10:43:26 -08:00
Linus Torvalds 3e2b32b693 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2006-01-14 10:42:40 -08:00
Linus Torvalds e7de369050 Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input 2006-01-14 09:49:16 -08:00
Dmitry Torokhov f0d5c6f419 Input: psmouse - attempt to re-synchronize mouse every 5 seconds
This should help driver to deal vith KVMs that reset mice when
switching between boxes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-14 00:27:37 -05:00
Vojtech Pavlik 3dd01a8311 Input: i8042 - add Sony Vaio FSC-115b to MUX blacklist
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-14 00:24:06 -05:00
Vitaly Wool 8275c642cc [PATCH] spi: use linked lists rather than an array
This makes the SPI core and its users access transfers in the SPI message
structure as linked list not as an array, as discussed on LKML.

From: David Brownell <dbrownell@users.sourceforge.net>

  Updates including doc, bugfixes to the list code, add
  spi_message_add_tail().  Plus, initialize things _before_ grabbing the
  locks in some cases (in case it grows more expensive).  This also merges
  some bitbang updates of mine that didn't yet make it into the mm tree.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:56 -08:00
David Brownell 2e5a7bd978 [PATCH] spi: ads7836 uses spi_driver
This updates the ads7864 driver to use the new "spi_driver" struct, and
includes some minor unrelated cleanup.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:55 -08:00
David Brownell ffa458c1bd [PATCH] spi: ads7846 driver
This is a driver for the ADS7846 touchscreen sensor, derived from
the corgi_ts and omap_ts drivers.  Key differences from those two:

  - Uses the new SPI framework (minimalist version)
  - <linux/spi/ads7846.h> abstracts board-specific touchscreen info
  - Sysfs attributes for the temperature and voltage sensors
  - Uses fewer ARM-specific IRQ primitives

The temperature and voltage sensors show up in sysfs like this:

  $ pwd
  /sys/devices/platform/omap-uwire/spi2.0
  $ ls
  bus@          input:event0@ power/        temp1         vbatt
  driver@       modalias      temp0         vaux
  $ cat modalias
  ads7846
  $ cat temp0
  991
  $ cat temp1
  1177
  $

So far only basic testing has been done.  There's a fair amount of hardware
that uses this sensor, and which also runs Linux, which should eventually
be able to use this driver.

One portability note may be of special interest.  It turns out that not all
SPI controllers are happy issuing requests that do things like "write 8 bit
command, read 12 bit response".  Most of them seem happy to handle various
word sizes, so the issue isn't "12 bit response" but rather "different rx
and tx write sizes", despite that being a common MicroWire convention.  So
this version of the driver no longer reads 12 bit native-endian words; it
reads 16-bit big-endian responses, then byteswaps them and shifts the
results to discard the noise.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 16:29:54 -08:00
Russell King 30226f8199 [PATCH] Add serio bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:07 -08:00
Russell King 29a4a20e9f [PATCH] Add gameport bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:07 -08:00
Kay Sievers bd37e5a951 [PATCH] INPUT: add MODALIAS to the event environment
input: add MODALIAS to the event environment

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:04 -08:00
Al Viro b4290a23cf [PATCH] m68k: namespace pollution fix (custom->amiga_custom)
in amigahw.h custom renamed to amiga_custom, in drivers with few instances the
same replacement, in the rest - #define custom amiga_custom in driver itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:09:00 -08:00
Al Viro 6450578f32 [PATCH] ia64: task_pt_regs()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:58 -08:00
Andi Kleen bf2fcc6fdf [PATCH] x86_64: Implement is_compat_task the right way
By setting a flag during a 32bit system call only

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 19:04:53 -08:00
Linus Torvalds 115b2ce1c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2006-01-10 08:30:29 -08:00
Alan Cox 33f0f88f1c [PATCH] TTY layer buffering revamp
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:59 -08:00
Paul Mundt 94f8d28c47 Input: remove obsolete maple input drivers
These haven't worked in some time, and we've dropped support for the bus
from the SH tree until someone shows some interest in maintaining it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10 02:00:27 -05:00
Arjan van de Ven e2bd470ec7 Input: prepare for f_ops constness
Avoid doing assignments to a live ->fops so it can be marked as 'const'.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10 01:59:51 -05:00
Miloslav Trmac c28c358367 Input: wistron - do not crash if BIOS does not support interface
offset can never be < 0 because it has type size_t.  The driver
currently oopses on insmod if BIOS does not support the interface,
instead of refusing to load.

Signed-off-by: Miloslav Trmac <mitr@volny.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10 01:59:07 -05:00
Dmitry Torokhov ebbac7dde2 Input: grip_mp - kill commented out code
Kill leftovers of dynalloc conversion.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-10 01:58:47 -05:00
Russell King 0a3a98f6dd Merge Linus' tree. 2006-01-09 19:18:33 +00:00
Russell King e9368f8288 [ARM] Remove asm/irq.h includes from ARM drivers
Many ARM drivers do not need to include asm/irq.h - remove this
unnecessary include from some ARM drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 13:56:42 +00:00
Russell King 9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Marcelo Tosatti 70c00ba0bb [PATCH] small hp_sdc_rtc cleanup: use no_llseek
Use no_llseek function.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: "Brian S. Julin" <bri@calyx.com>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:38 -08:00
Linus Torvalds b9abaa3fb7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2006-01-07 11:29:51 -08:00
Russell King f8ce25476d [ARM] Move asm/hardware/clock.h to linux/clk.h
This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:15:52 +00:00
Russell King 123656d4cc Merge with Linus' kernel. 2006-01-07 14:40:05 +00:00
Russell King a62c80e559 [ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 13:52:45 +00:00
Martin Schwidefsky 347a8dc3b8 [PATCH] s390: cleanup Kconfig
Sanitize some s390 Kconfig options.  We have ARCH_S390, ARCH_S390X,
ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT.  Replace these 6 options by
S390, 64BIT and COMPAT.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:53 -08:00
Ben Collins 6020bafc9e Input: i8042 - add OQO Zepto to noloop dmi table.
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-05 23:00:38 -05:00
Dmitry Torokhov dbc2634435 Input: atkbd - don't lose keymap settings when reconnecting keyboard
Call serio_reconnect() instead of serio_rescan() when detecting that
a new keyboard was plugged in. This should help KVM uses losing custom
keymap settings when switching between boxes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-05 23:00:13 -05:00
Dmitry Torokhov fed8bf19ec Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-01-05 22:25:13 -05:00
Linus Torvalds db9edfd7e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04 18:44:12 -08:00
Rusty Russell 1d8f430c15 [PATCH] Input: add modalias support
Here's the patch for modalias support for input classes.  It uses
comma-separated numbers, and doesn't describe all the potential keys (no
module currently cares, and that would make the strings huge).  The
changes to input.h are to move the definitions needed by file2alias
outside __KERNEL__.  I chose not to move those definitions to
mod_devicetable.h, because there are so many that it might break compile
of something else in the kernel.

The rest is fairly straightforward.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:09 -08:00
Kay Sievers 312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Kay Sievers 0296b22813 [PATCH] remove CONFIG_KOBJECT_UEVENT option
It makes zero sense to have hotplug, but not the netlink
events enabled today. Remove this option and merge the
kobject_uevent.h header into the kobject.h header file.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:07 -08:00
Greg Kroah-Hartman 75318d2d7c [PATCH] USB: remove .owner field from struct usb_driver
It is no longer needed, so let's remove it, saving a bit of memory.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 13:48:34 -08:00
Russell King a8d3584a2d [ARM] Remove clk_use()/clk_unuse()
It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 18:41:37 +00:00
Dmitry Torokhov ae5536d6f7 [PATCH] Input: warrior - fix HAT0Y axis setup
This patch fixes a typo introduced by conversion to dynamic input_dev
allocation.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-30 08:20:26 -08:00
David S. Miller 68ca243dd1 [SERMOUSE]: Sun mice speak 5-byte protocol too.
Noticed by Christophe Zimmerman, this explains the slow mouse movement
with 2.6.x kernels.

And checking the 2.4.x drivers/sbus/char/sunmouse.c driver shows we
always used a 5-byte protocol with Sun mice in the past.  I have no
idea how the 3-byte thing got into the 2.6.x driver, but it's surely
wrong.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-28 13:27:04 -08:00
Dmitry Torokhov e7c3aad53d Input: wistron - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding would work.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:26:24 -05:00
Dmitry Torokhov 9d6c25029d Input: maceps2 - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:53 -05:00
Dmitry Torokhov 26421c7acc Input: q40kbd - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:42 -05:00
Dmitry Torokhov 916d83cfe5 Input: ct82c710 - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:30 -05:00
Dmitry Torokhov 87fd6318a6 Input: i8042 - convert to the new platform device interface
Do not use platform_device_register_simple() as it is going away,
implement ->probe() and ->remove() functions so manual binding and
unbinding will work with this driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-28 01:25:11 -05:00
Adrian Bunk 0b57ee9e55 [SPARC]: introduce a SPARC Kconfig symbol
Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 23:09:54 -08:00
Dmitry Torokhov 8ea3694fcb Input: logips2pp - add signature of MouseMan Wheel Mouse (87)
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 01:02:54 -05:00
Dmitry Torokhov f5b64078d7 Input: sparcspkr - register with driver core as a platfrom device
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:52:35 -05:00
Dmitry Torokhov 1f75e6bdfa Input: m68kspkr - register with driver core as a platfrom device
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:52:29 -05:00
Dmitry Torokhov 5931774735 Input: pcspkr - register with driver core as a platfrom device
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:52:22 -05:00
Daniele Gozzi 1f1a91e033 Input: lifebook - add DMI signature of Fujitsu Lifebook B142
This DMI data was found in Fujitsu LifeBook B142 (Product S/N
FPC01003B, italian keyboard); re: bugzilla #5335

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:52:10 -05:00
Dmitry Torokhov 41293e5368 Input: add help entry for FM801 gameport driver to Kconfig
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:52:00 -05:00
Dmitry Torokhov 4eb38ac062 Input: i8042 - disable MUX mode for Sharp MM20
Add yet another entry to the ever-growing list of boxes with
non-working MUX implementation.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:51:51 -05:00
Dmitry Torokhov ba44995a1e Input: psmouse - don't leave mouse asleep
It looks like quite a few mice out there treat PSMOUSE_RESET_DIS
as a powerdown request and turn off the light rendering the mouse
unusable.

Vojtech recommended to switch from PSMOUSE_RESET_DIS to full reset,
however we don't want to do that everywhere as full reset is pretty
slow. Instead we only use it before probing for "generic" protocols,
such as IntelliMouse and Explorer, to make sure that the mouse will
be woken up if it went to sleep as a result of PSMOUSE_RESET_DIS
issued earlier.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:51:31 -05:00
Larry Finger f5e9c9ca54 Input: ALPS - add signature for HP ze1115
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-12-21 00:51:13 -05:00