autofs v5 direct and offset mounts within an autofs filesystem are
triggered by existing autofs triger mounts so the mount point dentry must
be positive. If the mount point dentry is negative then the trigger
doesn't exist so we can return fail immediately.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an autofs mount becomes catatonic before autofs4_wait_release() is
called the wait queue counter will not be decremented down to zero and the
entry will never be freed. There are also races decrementing the wait
counter in the wait release function. To deal with this the counter needs
to be updated while holding the wait queue mutex and waiters need to be
woken up unconditionally when the wait is removed from the queue to ensure
we eventually free the wait.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible for an autofs mount to become catatonic (and for the daemon
communication pipe to become NULL) after a wait has been initiallized but
before the request has been sent to the daemon. We need to check for this
before sending the request packet.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It see that the patch tittled "autofs4 - fix pending mount race" is
missing a change that I had recently made.
It's missing a kfree for the case mutex_lock_interruptible() fails
to aquire the wait queue mutex.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Close a race between a pending mount that is about to finish and a new
lookup for the same directory.
Process P1 triggers a mount of directory foo. It sets
DCACHE_AUTOFS_PENDING in the ->lookup routine, creates a waitq entry for
'foo', and calls out to the daemon to perform the mount. The autofs
daemon will then create the directory 'foo', using a new dentry that will
be hashed in the dcache.
Before the mount completes, another process, P2, tries to walk into the
'foo' directory. The vfs path walking code finds an entry for 'foo' and
calls the revalidate method. Revalidate finds that the entry is not
PENDING (because PENDING was never set on the dentry created by the
mkdir), but it does find the directory is empty. Revalidate calls
try_to_fill_dentry, which sets the PENDING flag and then calls into the
autofs4 wait code to trigger or wait for a mount of 'foo'. The wait code
finds the entry for 'foo' and goes to sleep waiting for the completion of
the mount.
Yet another process, P3, tries to walk into the 'foo' directory. This
process again finds a dentry in the dcache for 'foo', and calls into the
autofs revalidate code.
The revalidate code finds that the PENDING flag is set, and so calls
try_to_fill_dentry.
a) try_to_fill_dentry sets the PENDING flag redundantly for this
dentry, then calls into the autofs4 wait code.
b) the autofs4 wait code takes the waitq mutex and searches for an
entry for 'foo'
Between a and b, P1 is woken up because the mount completed. P1 takes the
wait queue mutex, clears the PENDING flag from the dentry, and removes the
waitqueue entry for 'foo' from the list.
When it releases the waitq mutex, P3 (eventually) acquires it. At this
time, it looks for an existing waitq for 'foo', finds none, and so creates
a new one and calls out to the daemon to mount the 'foo' directory.
Now, the reason that three processes are required to trigger this race is
that, because the PENDING flag is not set on the dentry created by mkdir,
the window for the race would be way to slim for it to ever occur.
Basically, between the testing of d_mountpoint(dentry) and the taking of
the waitq mutex, the mount would have to complete and the daemon would
have to be woken up, and that in turn would have to wake up P1. This is
simply impossible. Add the third process, though, and it becomes slightly
more likely.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs4_catatonic_mode() function accesses the wait queue without any
locking but can be called at any time. This could lead to a possible
double free of the name field of the wait and a double fput of the daemon
communication pipe or an fput of a NULL file pointer.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs_wait_queue already contains all of the fields of the
struct qstr, so change it into a qstr.
This patch, from Jeff Moyer, has been modified a liitle by myself.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When an open(2) call is made on an autofs mount point directory that
already exists and the O_DIRECTORY flag is not used the needed mount
callback to the daemon is not done. This leads to the path walk
continuing resulting in a callback to the daemon with an incorrect
key. open(2) is called without O_DIRECTORY by the "find" utility but
this should be handled properly anyway.
This happens because autofs needs to use the lookup flags to decide
when to callback to the daemon to perform a mount to prevent mount
storms. For example, an autofs indirect mount map that has the "browse"
option will have the mount point directories are pre-created and the
stat(2) call made by a color ls against each directory will cause all
these directories to be mounted. It is unfortunate we need to resort
to this but mount maps can be quite large. Additionally, if a user
manually umounts an autofs indirect mount the directory isn't removed
which also leads to this situation.
To resolve this autofs needs to use the lookup intent flags to enable
it to make this decision. This patch adds this check and triggers a
call back if any of the lookup intent flags are set as all these calls
warrant a mount attempt be requested.
I know that external VFS code which uses the lookup flags is something
that the VFS would like to eliminate but I have no choice as I can't
see any other way to do this. A VFS dentry or inode operation callback
which returns the lookup "type" (requires a definition) would be
sufficient. But this change is needed now and I'm not aware of the form
that coming VFS changes will take so I'm not willing to propose anything
along these lines.
If anyone can provide an alternate method I would be happy to use it.
[akpm@linux-foundation.org: fix build for concurrent VFS changes]
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we now delay hashing of dentrys until the ->mkdir() call, droping
and re-taking the directory mutex within the ->lookup() function when we
are being called by user space is not needed. This can lead to a race
when other processes are attempting to access the same directory during
mount point directory creation.
In this case we need to hang onto the mutex to ensure we don't get user
processes trying to create a mount request for a newly created dentry
after the mount point entry has already been created. This ensures that
when we need to check a dentry passed to autofs4_wait(), if it is hashed,
it is always the mount point dentry and not a new dentry created by
another lookup during directory creation.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The length of the symlink name has been moved but it needs to be set
before allocating space for it in the dentry info struct. This corrects a
mistake in a recent patch.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A while ago a patch to resolve a deadlock during directory creation was
merged. This delayed the hashing of lookup dentrys until the ->mkdir()
(or ->symlink()) operation completed to ensure we always went through
->lookup() instead of also having processes go through ->revalidate() so
our VFS locking remained consistent.
Now we are seeing a couple of side affects of that change in situations
with heavy mount activity.
Two cases have been identified:
1) When a mount request is triggered, due to the delayed hashing, the
directory created by user space for the mount point doesn't have the
DCACHE_AUTOFS_PENDING flag set. In the case of an autofs multi-mount
where a tree of mount point directories are created this can lead to
the path walk continuing rather than the dentry being sent to the wait
queue to wait for request completion. This is because, if the pending
flag isn't set, the criteria for deciding this is a mount in progress
fails to hold, namely that the dentry is not a mount point and has no
subdirectories.
2) A mount request dentry is initially created negative and unhashed.
It remains this way until the ->mkdir() callback completes. Since it
is unhashed a fresh dentry is used when the user space mount request
creates the mount point directory. This leaves the original dentry
negative and unhashed. But revalidate has no way to tell the VFS that
the dentry has changed, other than to force another ->lookup() by
returning false, which is at best wastefull and at worst not possible.
This results in an -ENOENT return from the original path walk when in
fact the mount succeeded.
To resolve this we need to ensure that the same dentry is used in all
calls to ->lookup() during the course of a mount request. This patch
achieves that by adding the initial dentry to a look aside list and
removes it at ->mkdir() or ->symlink() completion (or when the dentry is
released), since these are the only create operations autofs4 supports.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series enables the use of a single dentry for lookups prior to
the dentry being hashed and so we no longer need to redo the lookup. This
patch reverts the patch of commit
033790449b.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct the error of making a positive dentry negative after it has been
instantiated.
The code that makes this error attempts to re-use the dentry from a
concurrent expire and mount to resolve a race and the dentry used for the
lookup must be negative for mounts to trigger in the required cases. The
fact is that the dentry doesn't need to be re-used because all that is
needed is to preserve the flag that indicates an expire is still
incomplete at the time of the mount request.
This change uses the the dentry to check the flag and wait for the expire
to complete then discards it instead of attempting to re-use it.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some more places where path_{get,put}() can be used instead of
dput()/mntput() pair. Besides that it fixes a bug in autofs4_mount_busy()
where mntput() was called before dput().
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer has identified a case where the autofs4 function
root.c:try_to_fill_dentry() can return -EBUSY when it should return 0.
Jeff's description of the way this happens is:
"automount starts an expire for directory d. after the callout to the daemon,
but before the rmdir, another process tries to walk into the same directory.
It puts itself onto the waitq, pending the expiration.
When the expire finishes, the second process is woken up. In
try_to_fill_dentry, it does this check:
status = d_invalidate(dentry);
if (status != -EBUSY)
return -EAGAIN;
And status is EBUSY. The dentry still has a non-zero d_inode, and the
flags do not contain LOOKUP_CONTINUE or LOOKUP_DIRECTORY
So, we fall through and return -EBUSY to the caller."
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer has identified a race in due to an execution order dependency
in the autofs4 function root.c:try_to_fill_dentry().
Jeff's description of this race is:
"P1 does a lookup of /mount/submount/foo. Since the VFS can't find an entry
for "foo" under /mount/submount, it calls into the autofs4 kernel module to
allocate a new dentry, D1. The kernel creates a new waitq for this lookup and
calls the daemon to perform the mount.
The daemon performs a mkdir of the "foo" directory under /mount/submount,
which ends up creating a *new* dentry, D2.
Then, P2 does a lookup of /mount/submount/foo. The VFS path walking logic
finds a dentry in the dcache, D2, and calls the revalidate function with this.
In the autofs4 revalidate code, we then trigger a mount, since the dentry is
an empty directory that isn't a mountpoint, and so set DCACHE_AUTOFS_PENDING
and call into the wait code to trigger the mount.
The wait code finds our existing waitq entry (since it is keyed off of the
directory name) and adds itself to the list of waiters.
After the daemon finishes the mount, it calls back into the kernel to release
the waiters. When this happens, P1 is woken up and goes about clearing the
DCACHE_AUTOFS_PENDING flag, but it does this in D1! So, given that P1 in our
case is a program that will immediately try to access a file under
/mount/submount/foo, we end up finding the dentry D2 which still has the
pending flag set, and we set out to wait for a mount *again*!
So, one way to address this is to re-do the lookup at the end of
try_to_fill_dentry, and to clear the pending flag on the hashed dentry. This
seems a sane approach to me."
And Jeff's patch does this.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Catch invalid dentry when calculating its path.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Re-order some code in expire.c:autofs4_expire_indirect() to avoid compile
warning, reported by Harvey Harrison:
CHECK fs/autofs4/expire.c
fs/autofs4/expire.c:383:2: warning: context imbalance in
'autofs4_expire_indirect' - unexpected unlock
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/autofs4/root.c:536:23: warning: symbol 'ino' shadows an earlier one
fs/autofs4/root.c:510:22: originally declared here
There is no need to redeclare, we are at the end of the loop and in
the next iteration of the loop, ino will be reset.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add uid= and gid= options to /proc/mounts for autofs4 filesystems.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The set of functions process_session, task_session, process_group and
task_pgrp is confusing, as the names can be mixed with each other when looking
at the code for a long time.
The proposals are to
* equip the functions that return the integer with _nr suffix to
represent that fact,
* and to make all functions work with task (not process) by making
the common prefix of the same name.
For monotony the routines signal_session() and set_signal_session() are
replaced with task_session_nr() and set_task_session(), especially since they
are only used with the explicit task->signal dereference.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get rid of sparse related warnings from places that use integer as NULL
pointer.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to inconsistent locking in the VFS between calls to lookup and
revalidate deadlock can occur in the automounter.
The inconsistency is that the directory inode mutex is held for both lookup
and revalidate calls when called via lookup_hash whereas it is held only
for lookup during a path walk. Consequently, if the mutex is held during a
call to revalidate autofs4 can't release the mutex to callback the daemon
as it can't know whether it owns the mutex.
This situation happens when a process tries to create a directory within an
automount and a second process also tries to create the same directory
between the lookup and the mkdir. Since the first process has dropped the
mutex for the daemon callback, the second process takes it during
revalidate leading to deadlock between the autofs daemon and the second
process when the daemon tries to create the mount point directory.
After spending quite a bit of time trying to resolve this on more than one
occassion, using rather complex and ulgy approaches, it turns out that just
delaying the hashing of the dentry until the create operation works fine.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix coding style errors (extra spaces, long lines) in autofs and autofs4 files
being modified for container/pidspace issues.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: <containers@lists.osdl.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f50b6f8691 introduced a race in
autofs4 between autofs_lookup_unhashed() and autofs_dentry_release().
autofs_dentry_release() ends up clearing the ->dentry and ->inode members
of autofs_info before removing it from the rehash list. The list is
protected by the rehash lock in both functions, but since
autofs_dentry_release() starts tearing the autofs_info struct down before
removing it from the list, autofs_lookup_unhashed() can get a autofs_info
with a NULL dentry.
This patch moves the clearing of ->dentry and ->inode after the removal
from the rehash list.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This problem was identified and fixed some time ago by Jeff Moyer but it fell
through the cracks somehow.
It is possible that a user space application could remove and re-create a
directory during a request. To avoid returning a failure from lookup
incorrectly when our current dentry is unhashed we need to check if another
positive, hashed dentry matching this one exists and if so return it instead
of a fail.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Moyer has identified a race between mount and expire.
What happens is that during an expire the situation can arise that a directory
is removed and another lookup is done before the expire issues a completion
status to the kernel module. In this case, since the the lookup gets a new
dentry, it doesn't know that there is an expire in progress and when it posts
its mount request, matches the existing expire request and waits for its
completion. ENOENT is then returned to user space from lookup (as the dentry
passed in is now unhashed) without having performed the mount request.
The solution used here is to keep track of dentrys in this unhashed state and
reuse them, if possible, in order to preserve the flags. Additionally, this
infrastructure will provide the framework for the reintroduction of caching of
mount fails removed earlier in development.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current header file definitions for autofs version 5 have caused a couple
of problems for application builds downstream.
This fixes the problem by separating the definitions.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".
Compile tested with gcc & sparse.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Run this:
#!/bin/sh
for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
echo "De-casting $f..."
perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
done
And then go through and reinstate those cases where code is casting pointers
to non-pointers.
And then drop a few hunks which conflicted with outstanding work.
Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the autofs4
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When kernel is compiled with old version of autofs (CONFIG_AUTOFS_FS), and
new (observed at least with 5.x.x) automount deamon is started, kernel
correctly reports incompatible version of kernel and userland daemon, but
then screws things up instead of correct handling of the error:
autofs: kernel does not match daemon version
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
automount/4199 is trying to release lock (&type->s_umount_key) at:
[<c0163b9e>] get_sb_nodev+0x76/0xa4
but there are no more locks to release!
other info that might help us debug this:
no locks held by automount/4199.
stack backtrace:
[<c0103b15>] dump_trace+0x68/0x1b2
[<c0103c77>] show_trace_log_lvl+0x18/0x2c
[<c01041db>] show_trace+0xf/0x11
[<c010424d>] dump_stack+0x12/0x14
[<c012e02c>] print_unlock_inbalance_bug+0xe7/0xf3
[<c012fd4f>] lock_release+0x8d/0x164
[<c012b452>] up_write+0x14/0x27
[<c0163b9e>] get_sb_nodev+0x76/0xa4
[<c0163689>] vfs_kern_mount+0x83/0xf6
[<c016373e>] do_kern_mount+0x2d/0x3e
[<c017513f>] do_mount+0x607/0x67a
[<c0175224>] sys_mount+0x72/0xa4
[<c0102b96>] sysenter_past_esp+0x5f/0x99
DWARF2 unwinder stuck at sysenter_past_esp+0x5f/0x99
Leftover inexact backtrace:
=======================
and then deadlock comes.
The problem: autofs_fill_super() returns EINVAL to get_sb_nodev(), but
before that, it calls kill_anon_super() to destroy the superblock which
won't be needed. This is however way too soon to call kill_anon_super(),
because get_sb_nodev() has to perform its own cleanup of the superblock
first (deactivate_super(), etc.). The correct time to call
kill_anon_super() is in the autofs_kill_sb() callback, which is called by
deactivate_super() at proper time, when the superblock is ready to be
killed.
I can see the same faulty codepath also in autofs4. This patch solves
issues in both filesystems in a same way - it postpones the
kill_anon_super() until the proper time is signalized by deactivate_super()
calling the kill_sb() callback.
[raven@themaw.net: update comment]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Ian Kent <raven@themaw.net>
Cc: <stable@kernel.org>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Resolve the panic on failed mount of an autofs filesystem originally
reported by Mao Bibo.
It addresses two issues that happen after the mount fail. The first a NULL
pointer reference to a field (pipe) in the autofs superblock info structure
and second the lack of super block cleanup by the autofs and autofs4
modules.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make sure all dentries refs are released before calling kill_anon_super() so
that the assumption that generic_shutdown_super() can completely destroy the
dentry tree for there will be no external references holds true.
What was being done in the put_super() superblock op, is now done in the
kill_sb() filesystem op instead, prior to calling kill_anon_super().
This makes the struct autofs_sb_info::root member variable redundant (since
sb->s_root is still available), and so that is removed. The calls to
shrink_dcache_sb() are also removed since they're also redundant as
shrink_dcache_for_umount() will now be called after the cleanup routine.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some filesystems, instead of simply decrementing i_nlink, simply zero it
during an unlink operation. We need to catch these in addition to the
decrement operations.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is mostly included for parity with dec_nlink(), where we will have some
more hooks. This one should stay pretty darn straightforward for now.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.
We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.
So, add a little helper function to do the decrements. We'll tie into it in a
bit to note when i_nlink hits zero.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During testing I've found that the mount pending flag can be left set at
exit from autofs4_lookup after a failed mount request. This shouldn't be
allowed to happen and causes incorrect error returns.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The check for an empty directory in the autofs4_follow_link method fails
occassionally due to old dentrys. We had the same problem
autofs4_revalidate ages ago. I thought we wouldn't need this in
autofs4_follow_link, silly me.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For a long time now I have had a problem with not being able to return a
lookup failure on an existsing directory. In autofs this corresponds to a
mount failure on a autofs managed mount entry that is browsable (and so the
mount point directory exists).
While this problem has been present for a long time I've avoided resolving
it because it was not very visible. But now that autofs v5 has "mount and
expire on demand" of nested multiple mounts, such as is found when mounting
an export list from a server, solving the problem cannot be avoided any
longer.
I've tried very hard to find a way to do this entirely within the autofs4
module but have not been able to find a satisfactory way to achieve it.
So, I need to propose a change to the VFS.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the timeout of an autofs mount is set to zero then umounts are disabled.
This works fine, however the kernel module checks the expire timeout and
goes no further if it is zero. This is not the right thing to do at
shutdown as the module is passed an option to expire mounts regardless of
their timeout setting.
This patch allows autofs to honor the force expire option.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the combination of list_del(A) and list_add(A, B) to
list_move(A, B) under fs/.
Cc: Ian Kent <raven@themaw.net>
Acked-by: Joel Becker <joel.becker@oracle.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Hans Reiser <reiserfs-dev@namesys.com>
Cc: Urban Widmark <urban@teststation.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I've found a case where invalid dentrys in a mount tree, waiting to be
cleaned up by d_invalidate, prevent the expected expire.
In this case dentrys created during a lookup for which a mount fails or has
no entry in the mount map contribute to the d_count of the parent dentry.
These dentrys may not be invalidated prior to comparing the interanl usage
count of valid autofs dentrys against the dentry d_count which makes a
mount tree appear busy so it doesn't expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.
The filesystem is then required to manually set the superblock and root dentry
pointers. For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).
The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.
This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing. In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.
The patch also makes the following changes:
(*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
pointer argument and return an integer, so most filesystems have to change
very little.
(*) If one of the convenience function is not used, then get_sb() should
normally call simple_set_mnt() to instantiate the vfsmount. This will
always return 0, and so can be tail-called from get_sb().
(*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
dcache upon superblock destruction rather than shrink_dcache_anon().
This is required because the superblock may now have multiple trees that
aren't actually bound to s_root, but that still need to be cleaned up. The
currently called functions assume that the whole tree is rooted at s_root,
and that anonymous dentries are not the roots of trees which results in
dentries being left unculled.
However, with the way NFS superblock sharing are currently set to be
implemented, these assumptions are violated: the root of the filesystem is
simply a dummy dentry and inode (the real inode for '/' may well be
inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
with child trees.
[*] Anonymous until discovered from another tree.
(*) The documentation has been adjusted, including the additional bit of
changing ext2_* into foo_* in the documentation.
[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes two problems.
First, the comparison of entries in the waitq.c was incorrect.
Second, the NFY_NONE check was incorrect. The test of whether the dentry
is mounted if ineffective, for example, if an expire fails then we could
wait forever on a non existant expire. The bug was identified by Jeff
Moyer.
The patch changes autofs4 to wait on expires only as this is all that's
needed. If there is no existing wait when autofs4_wait is call with a type
of NFY_NONE it delays until either a wait appears or the the expire flag is
cleared.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a proper prototype for autofs4_dentry_release() to autofs_i.h.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix accidental underflow of the atomic counter.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This functionality is also need for operation of autofs v5 direct mounts.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have to have a valid sbi here, or we'd have oopsed already. (There's a
dereference of sbi->catatonic a few lines above)
Coverity #740
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch define a new autofs packet for autofs v5 and updates the waitq.c
functions to handle the additional packet type.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds expire logic for autofs direct mounts.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a follow_link inode method for the root of an autofs direct
mount trigger. It also adds the corresponding mount options and updates the
show_mount method.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the functions may_umount and may_umount_tree to boolean functions to
aid code readability.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rename the function simple_empty_nolock to __simple_empty in line with kernel
naming conventions.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Whitespace and formating changes to waitq code.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add show_options method to display autofs4 mount options in the proc
filesystem.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the update of i_atime from autofs4 in favour of having VFS update it.
i_atime is never used for expire in autofs4.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alter the expire semantics that define how "busyness" is determined.
Currently a last_used counter is updated on every revalidate from processes
other than the mount owner process group.
This patch changes that so that an expire candidate is busy only if it has a
reference count greater than the expected minimum, such as when there is an
open file or working directory in use.
This method is the only way that busyness can be established for direct mounts
within the new implementation. For consistency the expire semantic is made
the same for all mounts.
A side effect of the patch is that mounts which remain mounted unessessarily
in the presence of some GUI programs that scan the filesystem should now
expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix the case where an expire returns busy on a tree mount when it is in fact
not busy. This case was overlooked when the patch to prevent the expiring
away of "scaffolding" directories for tree mounts was applied.
The problem arises when a tree of mounts is a member of a map with other keys.
The current logic will not expire the tree if any other mount in the map is
busy. The solution is to maintain a "minimum" use count for each autofs
dentry and compare this to the actual dentry usage count during expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Simplify the expire tree traversal code by using a function from namespace.c
to calculate the next entry in the top down tree traversals carried out during
the expire operation.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the names of the boolean functions autofs4_check_mount and
autofs4_check_tree to autofs4_mount_busy and autofs4_tree_busy respectively
and alters their return codes to suit in order to aid code readabilty.
A couple of white space cleanups are included as well.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Addresse a problem where stale dentrys stop mounts from happening.
When a mount point directory is pre-created and a non-existent entry within it
is requested a dentry ends up being created within the mount point directory
which stops future mounts. The problem is solved by ignoring negative,
unhashed dentrys in the mount point d_subdirs list.
Additionally the apparent cacheing of -ENOENT returns from requests is
removed. The test on d_time is a tautology and d_time is not initialised and
has an unexpected value. In short it doesn't do what it's meant to.
The cacheing of failed requests to the daemon is important and will be
followed up later.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change readdir routines to use the cursor based routines in libfs.c. This
removes reliance on old readdir code from 2.4 and should improve efficiency of
readdir in autofs4.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Whitespace and formating changes to lookup code.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
fs: Use <linux/capability.h> where capable() is used.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After my lookup_hash patch ->d_revalidate always gets a valid struct nameidata
passed (unless you use lookup_one_len which autofs4 doesn't), so we can switch
it from update_atime to touch_atime. This is a bit of an academic excercise
because autofs has a 1:1 vfsmount superblock relation, but I want to get rid
of update_atime so filesystems authors can't easily screw up per-mountpoint
noatime support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: Ingo Molnar <mingo@elte.hu>
(finished the conversion)
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some long time ago, dentry struct was carefully tuned so that on 32 bits
UP, sizeof(struct dentry) was exactly 128, ie a power of 2, and a multiple
of memory cache lines.
Then RCU was added and dentry struct enlarged by two pointers, with nice
results for SMP, but not so good on UP, because breaking the above tuning
(128 + 8 = 136 bytes)
This patch reverts this unwanted side effect, by using an union (d_u),
where d_rcu and d_child are placed so that these two fields can share their
memory needs.
At the time d_free() is called (and d_rcu is really used), d_child is known
to be empty and not touched by the dentry freeing.
Lockless lookups only access d_name, d_parent, d_lock, d_op, d_flags (so
the previous content of d_child is not needed if said dentry was unhashed
but still accessed by a CPU because of RCU constraints)
As dentry cache easily contains millions of entries, a size reduction is
worth the extra complexity of the ugly C union.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Paul Jackson <pj@sgi.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the fs/ part of the big kfree cleanup patch.
Remove pointless checks for NULL prior to calling kfree() in fs/.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the automount daemon receives a signal which causes it to sumarily
terminate the autofs4 module leaks dentries. The same problem exists with
detached mount requests without the warning.
This patch cleans these dentries at umount.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix debugging printk.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For browsable autofs maps, a mount request that arrives at the same time an
expire is happening can fail to perform the needed mount.
This happens becuase the directory exists and so the revalidate succeeds when
we need it to fail so that lookup is called on the same dentry to do the
mount. Instead lookup is called on the next path component which should be
whithin the mount, but the parent isn't mounted.
The solution is to allow the revalidate to continue and perform the mount as
no directory creation (at mount time) is needed for browsable mount entries.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At the tail end of an expire it's possible for a process to enter
autofs4_wait, with a waitq type of NFY_NONE but find that the expire is
finished. In this cause autofs4_wait will try to create a new wait but not
notify the daemon leading to a hang. As the wait type is meant to delay mount
requests from revalidate or lookup during an expire and the expire is done all
we need to do is check if the dentry is a mountpoint. If it's not then we're
done.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While this is not a solution to bind and move mounts on autofs owned
directories it is necessary to fix the trady error handling.
At least it avoids the kernel panic I observed checking out bug #4589.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For tree mount maps, a call to chdir or chroot, to a directory above the
moint point directories at a certain time during the expire results in the
expire incorrectly thinking the tree is not busy. This patch adds a check
to see if the filesystem above the tree mount points is busy and also locks
the filesystem during the tree mount expire to prevent the race.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's possible for an event wait request to arive before the event
requestor. If this happens the daemon never gets notified and autofs
hangs.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Ian Kent