This change is probably good for other boards also, but the change
has limited scope and is reasonably safe.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Coding style and printk's are cleaned up in subsequent patches
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A handlful of coding style issue cleaned up in the following patches.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
vidioc_g_tuner should not do any memset for the parameters. Core
already does that. In particular, V4L2 core now does some handling
for the tuner type, and the tuner-core module relies on that.
So, doing any memset there is a very bad idea.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[stoth@kernellabs.com: add it to the makefile and fix snd_card binding]
[liplianin@netup.ru: videobuf: Remove the videobuf_sg_dma_map/unmap functions]
Signed-off-by: Mijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The tvp5150 video decoder has two operation modes to configure the video
standard used.
If auto-switch mode is enable, the device can sense the signal and detect which
video standard the device is operating. Also the device can be forced to use a
user defined video standard.
Each operation mode uses a different register and the bitmask values to
represent each standard is different.
So we add video standard constants for both autoswitch and no-autoswitch mode.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Both mt9t001.c and mt9p031.c have two identical issues, those
being that they will need module.h inclusion for the upcoming
cleanup going on there, and that their dependencies don't limit
selection of configs that will fail to compile as follows:
The related config options are CONFIG_MEDIA_CONTROLLER and
CONFIG_VIDEO_V4L2_SUBDEV_API. Looking at the code, it appears
that the driver was never intended to work without these enabled,
so add a dependency on CONFIG_VIDEO_V4L2_SUBDEV_API, which in
turn already has a dependency on CONFIG_MEDIA_CONTROLLER.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As msp3400 allows standards detection, add support for it. That
efectivelly means that devices with msp3400 can now implement
VIDIOC_QUERYSTD, and it will provide very good detection for
the standard, specially if combined with a video decoder detection.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of using V4L2_STD_ALL when no standard is detected,
trust that the maximum allowed standards are already filled by
the V4L2 core. It is better this way, as the bridge and/or the audio
decoder may have some extra restrictions to some video standards.
This also allow other devices like audio and tuners to contribute to
standards detection, when they support such feature.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
According with the V4L2 API spec:
"When detection is not possible or fails, the set must contain
all standards supported by the current video input or output."
The V4L2 core has the mask with all supported standards already. So,
apply it. Driver and subdevs can then just remove standards from the
mask, as they're able of detecting audio, video and frames frequency.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There are several bugs at saa7115 standards detection:
After the fix, the driver is returning the proper standards,
as tested with 3 different broadcast sources:
On an invalid channel (without any TV signal):
[ 4394.931630] saa7115 15-0021: Status byte 2 (0x1f)=0xe0
[ 4394.931635] saa7115 15-0021: detected std mask = 00ffffff
With a PAL/M signal:
[ 4410.836855] saa7115 15-0021: Status byte 2 (0x1f)=0xb1
[ 4410.837727] saa7115 15-0021: Status byte 1 (0x1e)=0x82
[ 4410.837731] saa7115 15-0021: detected std mask = 00000900
With a NTSC/M signal:
[ 4422.383893] saa7115 15-0021: Status byte 2 (0x1f)=0xb1
[ 4422.384768] saa7115 15-0021: Status byte 1 (0x1e)=0x81
[ 4422.384772] saa7115 15-0021: detected std mask = 0000b000
Tests were done with a WinTV PVR USB2 Model 29xx card.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
These are necessary to prevent dead-locks e.g. if one thread waits
in dqbuf at one end and another tries to queue a buffer at the
other end.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Pawel Osciak <pawel@osciak.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch fixes mbus configuration between Mixer, SDO and HDMI. The SDO
accepts only YUV444 on input. The HDMI in DVI mode accepts only RGB888. Now
Mixer is choosing proper output format depending on mbus format.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Current version of the driver does not support HDMI features
not present in DVI standard. Therefore DVI mode is used to
keep compatibility with DVI devices.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The TVOUT driver requires PM_RUNTIME support for proper clock
enabling.
Signed-off-by: Hatim Ali <hatim.rv@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Simplifies the locking by moving the em28xx_init_extension() call until
em28xx_usb_probe() has finished with the dev->lock mutex. It therefore
makes the second and subsequent "plugging" events logically identical to
the first "plugging" event when the em28xx-dvb and em28xx-alsa modules
must be loaded (i.e. registered).
Basically, em28xx_usb_probe() requests that em28xx-dvb be loaded and
also triggers udev to initialise the V4L2 devices. These two events are
serialised by the dev->lock mutex but the order that they happen in is
undefined. But this has always been the case anyway.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch just removes the prototypes for the two functions that I've already
deleted in my previous patches.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This fixes the deadlock that occurs with either multiple PCTV 290e adapters or when a single PCTV 290e adapter is replugged.
For DVB devices, the device lock must now *not* be held when adding/removing either a device or an extension to the respective lists. (Because em28xx_init_dvb() will want to take the lock instead).
Conversely, for Audio-Only devices, the device lock *must* be held when adding/removing either a device or an extension to the respective lists.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch closes the race on the device and extension lists at USB disconnect
time. Previously, the device was removed from the device list during
em28xx_release_resources(), and then passed to the em28xx_close_extension()
function so that all extensions could run their fini() operations. However, this
left a (brief, theoretical, highly unlikely ;-)) window between these two calls
during which a new module could call em28xx_register_extension(). The result
would have been that the em28xx_usb_disconnect() function would also have passed
the device to the new extension's fini() function, despite never having called
the extension's init() function.
This patch also restores em28xx_close_extension()'s symmetry with
em28xx_init_extension(), and establishes the property that every device in the
device list must have been initialised for every extension in the extension list.
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
(Resending because Mauro reported losing some emails on IRC)
Provide CX2388[578] IR receive timeout (RTO) reports in the
final space raw event sent up the chain to the raw IR pulse
decoders. This should allow the lirc decoder to actually
measure the inter-transmission gap properly.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is no need to put the IRQ number in driver's private platform
data structure as this can also be passed in struct i2c_lient.irq.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Switch to generic media bus signal polarity flags and allow
configuring the FIELD signal polarity.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As the choice of the alternate setting has been enhanced in the gspca main,
forcing its number here is no more useful.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The JPEG quality was guessed as around 82%. Information in ms-win drivers
says it should be 85%.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some webcams ask for a greater time to start.
This patch increases the delay before timeout error on capture start.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver is based on Anders Blomdell's source proposed in april 2009.
It has been extended to handle the tp6810 bridge and the soi763a sensor.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch is adapted from a patch from Sarah Sharp (2010/05/03).
The xHCD handler checks the USB bandwidth on usb_set_interface()
instead of on usb_submit_urb().
Now, the same treatment is applied in case of error of both functions.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Previously image transfer used to use the highest altsetting, which, most of
the time, took the whole USB bandwidth.
Now, the altsetting is chosen according to an estimation of the bandwidth
needed for image transfer.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The sd_isoc_init() did only a set interface which is done in gspca main.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This is an improved version of the patch I sent a little ago.
The problem was:
On my DC-1125 webcam chip from Syntek, whenever the webcam turns
on, the LED light on it is turned on also and never turns off again unless
system is shut downed or restarted.
The previous version seemed to break some other laptop webcam work. Thanks
to Andrea Anacleto for the bug report and solution.
Signed-off-by: Andrea Anacleto <andreaanacleto@libero.it>
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ioctls on the subdevs node currently don't dispatch the register access debug
driver callbacks. Add the dispatching with the same security checks are for
non subdev video nodes (i.e. only capable(CAP_SYS_ADMIN may call the register
access ioctls).
Signed-off-by: Martin Hostettler <martin@neutronstar.dyndns.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
remove VPBE_DISPLAY_SD_BUF_SIZE as it is no longer used.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The UVC driver uses usb_alloc_coherent() to allocate DMA data buffers.
On systems without coherent DMA this ends up allocating buffers in
uncached memory. The subsequent memcpy's done to coalesce the DMA
chunks into contiguous buffers then run VERY slowly. On a MIPS test
system the memcpy is about 200 times slower. This issue prevents the
system from keeping up with 720p YUYV data at 10fps.
The following patch uses kmalloc to alloc the DMA buffers instead of
usb_alloc_coherent on systems without coherent DMA. With this patch
the system was easily able to keep up with 720p at 10fps.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth