A fence can be attached to a buffer which is being filled or consumed
by hw, to allow userspace to pass the buffer without waiting to another
device. For example, userspace can call page_flip ioctl to display the
next frame of graphics after kicking the GPU but while the GPU is still
rendering. The display device sharing the buffer with the GPU would
attach a callback to get notified when the GPU's rendering-complete IRQ
fires, to update the scan-out address of the display, without having to
wake up userspace.
A driver must allocate a fence context for each execution ring that can
run in parallel. The function for this takes an argument with how many
contexts to allocate:
+ fence_context_alloc()
A fence is transient, one-shot deal. It is allocated and attached
to one or more dma-buf's. When the one that attached it is done, with
the pending operation, it can signal the fence:
+ fence_signal()
To have a rough approximation whether a fence is fired, call:
+ fence_is_signaled()
The dma-buf-mgr handles tracking, and waiting on, the fences associated
with a dma-buf.
The one pending on the fence can add an async callback:
+ fence_add_callback()
The callback can optionally be cancelled with:
+ fence_remove_callback()
To wait synchronously, optionally with a timeout:
+ fence_wait()
+ fence_wait_timeout()
When emitting a fence, call:
+ trace_fence_emit()
To annotate that a fence is blocking on another fence, call:
+ trace_fence_annotate_wait_on(fence, on_fence)
A default software-only implementation is provided, which can be used
by drivers attaching a fence to a buffer when they have no other means
for hw sync. But a memory backed fence is also envisioned, because it
is common that GPU's can write to, or poll on some memory location for
synchronization. For example:
fence = custom_get_fence(...);
if ((seqno_fence = to_seqno_fence(fence)) != NULL) {
dma_buf *fence_buf = seqno_fence->sync_buf;
get_dma_buf(fence_buf);
... tell the hw the memory location to wait ...
custom_wait_on(fence_buf, seqno_fence->seqno_ofs, fence->seqno);
} else {
/* fall-back to sw sync * /
fence_add_callback(fence, my_cb);
}
On SoC platforms, if some other hw mechanism is provided for synchronizing
between IP blocks, it could be supported as an alternate implementation
with it's own fence ops in a similar way.
enable_signaling callback is used to provide sw signaling in case a cpu
waiter is requested or no compatible hardware signaling could be used.
The intention is to provide a userspace interface (presumably via eventfd)
later, to be used in conjunction with dma-buf's mmap support for sw access
to buffers (or for userspace apps that would prefer to do their own
synchronization).
v1: Original
v2: After discussion w/ danvet and mlankhorst on #dri-devel, we decided
that dma-fence didn't need to care about the sw->hw signaling path
(it can be handled same as sw->sw case), and therefore the fence->ops
can be simplified and more handled in the core. So remove the signal,
add_callback, cancel_callback, and wait ops, and replace with a simple
enable_signaling() op which can be used to inform a fence supporting
hw->hw signaling that one or more devices which do not support hw
signaling are waiting (and therefore it should enable an irq or do
whatever is necessary in order that the CPU is notified when the
fence is passed).
v3: Fix locking fail in attach_fence() and get_fence()
v4: Remove tie-in w/ dma-buf.. after discussion w/ danvet and mlankorst
we decided that we need to be able to attach one fence to N dma-buf's,
so using the list_head in dma-fence struct would be problematic.
v5: [ Maarten Lankhorst ] Updated for dma-bikeshed-fence and dma-buf-manager.
v6: [ Maarten Lankhorst ] I removed dma_fence_cancel_callback and some comments
about checking if fence fired or not. This is broken by design.
waitqueue_active during destruction is now fatal, since the signaller
should be holding a reference in enable_signalling until it signalled
the fence. Pass the original dma_fence_cb along, and call __remove_wait
in the dma_fence_callback handler, so that no cleanup needs to be
performed.
v7: [ Maarten Lankhorst ] Set cb->func and only enable sw signaling if
fence wasn't signaled yet, for example for hardware fences that may
choose to signal blindly.
v8: [ Maarten Lankhorst ] Tons of tiny fixes, moved __dma_fence_init to
header and fixed include mess. dma-fence.h now includes dma-buf.h
All members are now initialized, so kmalloc can be used for
allocating a dma-fence. More documentation added.
v9: Change compiler bitfields to flags, change return type of
enable_signaling to bool. Rework dma_fence_wait. Added
dma_fence_is_signaled and dma_fence_wait_timeout.
s/dma// and change exports to non GPL. Added fence_is_signaled and
fence_enable_sw_signaling calls, add ability to override default
wait operation.
v10: remove event_queue, use a custom list, export try_to_wake_up from
scheduler. Remove fence lock and use a global spinlock instead,
this should hopefully remove all the locking headaches I was having
on trying to implement this. enable_signaling is called with this
lock held.
v11:
Use atomic ops for flags, lifting the need for some spin_lock_irqsaves.
However I kept the guarantee that after fence_signal returns, it is
guaranteed that enable_signaling has either been called to completion,
or will not be called any more.
Add contexts and seqno to base fence implementation. This allows you
to wait for less fences, by testing for seqno + signaled, and then only
wait on the later fence.
Add FENCE_TRACE, FENCE_WARN, and FENCE_ERR. This makes debugging easier.
An CONFIG_DEBUG_FENCE will be added to turn off the FENCE_TRACE
spam, and another runtime option can turn it off at runtime.
v12:
Add CONFIG_FENCE_TRACE. Add missing documentation for the fence->context
and fence->seqno members.
v13:
Fixup CONFIG_FENCE_TRACE kconfig description.
Move fence_context_alloc to fence.
Simplify fence_later.
Kill priv member to fence_cb.
v14:
Remove priv argument from fence_add_callback, oops!
v15:
Remove priv from documentation.
Explicitly include linux/atomic.h.
v16:
Add trace events.
Import changes required by android syncpoints.
v17:
Use wake_up_state instead of try_to_wake_up. (Colin Cross)
Fix up commit description for seqno_fence. (Rob Clark)
v18:
Rename release_fence to fence_release.
Move to drivers/dma-buf/.
Rename __fence_is_signaled and __fence_signal to *_locked.
Rename __fence_init to fence_init.
Make fence_default_wait return a signed long, and fix wait ops too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com> #use smp_mb__before_atomic()
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AER uses a separate trace interface by now. To make it
consistent, move it into unified RAS trace interface.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The component struct already has a name and id field which are initialized to
the same values as the same fields in the CODEC and platform structs. So remove
them from the CODEC and platform structs and used the ones from the component
struct instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently the __field() macro in TRACE_EVENT is only good for primitive
values, such as integers and pointers, but it fails on complex data types
such as structures or unions. This is because the __field() macro
determines if the variable is signed or not with the test of:
(((type)(-1)) < (type)1)
Unfortunately, that fails when type is a structure.
Since trace events should support structures as fields a new macro
is created for such a case called __field_struct() which acts exactly
the same as __field() does but it does not do the signed type check
and just uses a constant false for that answer.
Cc: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
syscall_regfunc() and syscall_unregfunc() should set/clear
TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race
with copy_process() and miss the new child which was not added to
the process/thread lists yet.
Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT
under tasklist.
Link: http://lkml.kernel.org/p/20140413185854.GB20668@redhat.com
Cc: stable@vger.kernel.org # 2.6.33
Fixes: a871bd33a6 "tracing: Add syscall tracepoints"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull more scheduler updates from Ingo Molnar:
"Second round of scheduler changes:
- try-to-wakeup and IPI reduction speedups, from Andy Lutomirski
- continued power scheduling cleanups and refactorings, from Nicolas
Pitre
- misc fixes and enhancements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Delete extraneous extern for to_ratio()
sched/idle: Optimize try-to-wake-up IPI
sched/idle: Simplify wake_up_idle_cpu()
sched/idle: Clear polling before descheduling the idle thread
sched, trace: Add a tracepoint for IPI-less remote wakeups
cpuidle: Set polling in poll_idle
sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...)
sched: Rename capacity related flags
sched: Final power vs. capacity cleanups
sched: Remove remaining dubious usage of "power"
sched: Let 'struct sched_group_power' care about CPU capacity
sched/fair: Disambiguate existing/remaining "capacity" usage
sched/fair: Change "has_capacity" to "has_free_capacity"
sched/fair: Remove "power" from 'struct numa_stats'
sched: Fix signedness bug in yield_to()
sched/fair: Use time_after() in record_wakee()
sched/balancing: Reduce the rate of needless idle load balancing
sched/fair: Fix unlocked reads of some cfs_b->quota/period
- I didn't remember correctly that the Hans de Goede's ACPI video
patches actually didn't flip the video.use_native_backlight
default, although we had discussed that and decided to do that.
Since I said we would do that in the previous PM+ACPI pull
request, make that change for real now.
- ACPI bus check notifications for PCI host bridges don't cause
the bus below the host bridge to be checked for changes as they
should because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
subsystem that forgets to add hotplug contexts to PCI host bridge
ACPI device objects. Create hotplug contexts for PCI host bridges
too as appropriate.
- Revert recent cpufreq commit related to the big.LITTLE cpufreq
driver that breaks arm64 builds.
- Fix for a regression in the ppc-corenet cpufreq driver introduced
during the 3.15 cycle and causing the driver to use the remainder
from do_div instead of the quotient. From Ed Swarthout.
- Resets triggered by panic activate a BUG_ON() in vmalloc.c on
systems where the ACPI reset register is located in memory address
space. Fix from Randy Wright.
- Fix for a problem with cpufreq governors that decisions made by
them may be suboptimal due to the fact that deferrable timers are
used by them for CPU load sampling. From Srivatsa S Bhat.
- Fix for a problem with the Tegra cpufreq driver where the CPU
frequency is temporarily switched to a "stable" level that
is different from both the initial and target frequencies
during transitions which causes udelay() to expire earlier than
it should sometimes. From Viresh Kumar.
- New trace points and rework of some existing trace points for
system suspend/resume profiling from Todd Brandt.
- Assorted cpufreq fixes and cleanups from Stratos Karafotis and
Viresh Kumar.
- Copyright notice update for suspend-and-cpuhotplug.txt from
Srivatsa S Bhat.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=0lht
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are fixups on top of the previous PM+ACPI pull request,
regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes
(ACPI reset, cpufreq), new PM trace points for system suspend
profiling and a copyright notice update.
Specifics:
- I didn't remember correctly that the Hans de Goede's ACPI video
patches actually didn't flip the video.use_native_backlight
default, although we had discussed that and decided to do that.
Since I said we would do that in the previous PM+ACPI pull request,
make that change for real now.
- ACPI bus check notifications for PCI host bridges don't cause the
bus below the host bridge to be checked for changes as they should
because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
subsystem that forgets to add hotplug contexts to PCI host bridge
ACPI device objects. Create hotplug contexts for PCI host bridges
too as appropriate.
- Revert recent cpufreq commit related to the big.LITTLE cpufreq
driver that breaks arm64 builds.
- Fix for a regression in the ppc-corenet cpufreq driver introduced
during the 3.15 cycle and causing the driver to use the remainder
from do_div instead of the quotient. From Ed Swarthout.
- Resets triggered by panic activate a BUG_ON() in vmalloc.c on
systems where the ACPI reset register is located in memory address
space. Fix from Randy Wright.
- Fix for a problem with cpufreq governors that decisions made by
them may be suboptimal due to the fact that deferrable timers are
used by them for CPU load sampling. From Srivatsa S Bhat.
- Fix for a problem with the Tegra cpufreq driver where the CPU
frequency is temporarily switched to a "stable" level that is
different from both the initial and target frequencies during
transitions which causes udelay() to expire earlier than it should
sometimes. From Viresh Kumar.
- New trace points and rework of some existing trace points for
system suspend/resume profiling from Todd Brandt.
- Assorted cpufreq fixes and cleanups from Stratos Karafotis and
Viresh Kumar.
- Copyright notice update for suspend-and-cpuhotplug.txt from
Srivatsa S Bhat"
* tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges
PM / sleep: trace events for device PM callbacks
cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
cpufreq: tegra: update comment for clarity
cpufreq: intel_pstate: Remove duplicate CPU ID check
cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt
cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
PM / sleep: trace events for suspend/resume
cpufreq: ppc-corenet-cpu-freq: do_div use quotient
Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
cpufreq: Tegra: implement intermediate frequency callbacks
cpufreq: add support for intermediate (stable) frequencies
ACPI / video: Change the default for video.use_native_backlight to 1
ACPI: Fix bug when ACPI reset register is implemented in system memory
Adds two trace events which supply the same info that initcall_debug
provides, but via ftrace instead of dmesg. The existing initcall_debug
calls require the pm_print_times_enabled var to be set (either via
sysfs or via the kernel cmd line). The new trace events provide all the
same info as the initcall_debug prints but with less overhead, and also
with coverage of device prepare and complete device callbacks.
These events replace the device_pm_report_time event (which has been
removed). device_pm_callback_start is called first and provides the device
and callback info. device_pm_callback_end is called after with the
device name and error info. The time and pid are gathered from the trace
data headers.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch-set includes the following major enhancement patches.
o enhance wait_on_page_writeback
o support SEEK_DATA and SEEK_HOLE
o enhance readahead flows
o enhance IO flushes
o support fiemap
o add some tracepoints
The other bug fixes are as follows.
o fix to support a large volume > 2TB correctly
o recovery bug fix wrt fallocated space
o fix recursive lock on xattr operations
o fix some cases on the remount flow
And, there are a bunch of cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xqsO
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, there is no special interesting feature, but we've
investigated a couple of tuning points with respect to the I/O flow.
Several major bug fixes and a bunch of clean-ups also have been made.
This patch-set includes the following major enhancement patches:
- enhance wait_on_page_writeback
- support SEEK_DATA and SEEK_HOLE
- enhance readahead flows
- enhance IO flushes
- support fiemap
- add some tracepoints
The other bug fixes are as follows:
- fix to support a large volume > 2TB correctly
- recovery bug fix wrt fallocated space
- fix recursive lock on xattr operations
- fix some cases on the remount flow
And, there are a bunch of cleanups"
* tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
f2fs: support f2fs_fiemap
f2fs: avoid not to call remove_dirty_inode
f2fs: recover fallocated space
f2fs: fix to recover data written by dio
f2fs: large volume support
f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages
f2fs: avoid overflow when large directory feathure is enabled
f2fs: fix recursive lock by f2fs_setxattr
MAINTAINERS: add a co-maintainer from samsung for F2FS
MAINTAINERS: change the email address for f2fs
f2fs: use inode_init_owner() to simplify codes
f2fs: avoid to use slab memory in f2fs_issue_flush for efficiency
f2fs: add a tracepoint for f2fs_read_data_page
f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
f2fs: add a tracepoint for f2fs_write_end
f2fs: add a tracepoint for f2fs_write_begin
f2fs: fix checkpatch warning
f2fs: deactivate inode page if the inode is evicted
f2fs: decrease the lock granularity during write_begin
...
to help out the rest of the kernel to ease their use of trace events.
The big change for this release is the allowing of other tracers,
such as the latency tracers, to be used in the trace instances and allow
for function or function graph tracing to be in the top level
simultaneously.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTlbUqAAoJEKQekfcNnQGuP+8H+wTBG06beHsqe6XcaeXcKNkt
Mimm0O04oQdw89CBWeJvXyOwRTtiN4M/4hxHXBTDtChxM9oUyWw1o0IpSMMuQ16O
w9r3DfC8e1air+ufEuYWM0QNtyzHi8EfDSNia55ON5jvtkCZTXOEKZD+n8M9w28p
I7PVgr0PDztsCpethCpg0M8beK9zuQPWMzsHAQCsKI06Xl5z33kPIJR15Exh+Kr1
uVVTZW7JFVAPuSnteLSIx9pN6OjsVGzOZCljg+O+9/v/02u5nkMiS2nURxae86kg
RTSiRYT6Hvl/MCBhdss/w5kgSk6BYiZ0hXbLtwetvre+vQrOR5CnDw2DxZ7e+gU=
=oudH
-----END PGP SIGNATURE-----
Merge tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Lots of tweaks, small fixes, optimizations, and some helper functions
to help out the rest of the kernel to ease their use of trace events.
The big change for this release is the allowing of other tracers, such
as the latency tracers, to be used in the trace instances and allow
for function or function graph tracing to be in the top level
simultaneously"
* tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix memory leak on instance deletion
tracing: Fix leak of ring buffer data when new instances creation fails
tracing/kprobes: Avoid self tests if tracing is disabled on boot up
tracing: Return error if ftrace_trace_arrays list is empty
tracing: Only calculate stats of tracepoint benchmarks for 2^32 times
tracing: Convert stddev into u64 in tracepoint benchmark
tracing: Introduce saved_cmdlines_size file
tracing: Add __get_dynamic_array_len() macro for trace events
tracing: Remove unused variable in trace_benchmark
tracing: Eliminate double free on failure of allocation on boot up
ftrace/x86: Call text_ip_addr() instead of the duplicated code
tracing: Print max callstack on stacktrace bug
tracing: Move locking of trace_cmdline_lock into start/stop seq calls
tracing: Try again for saved cmdline if failed due to locking
tracing: Have saved_cmdlines use the seq_read infrastructure
tracing: Add tracepoint benchmark tracepoint
tracing: Print nasty banner when trace_printk() is in use
tracing: Add funcgraph_tail option to print function name after closing braces
tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks
...
collapse_range and zero_range fallocate functions. In addition,
improve the scalability of adding and remove inodes from the orphan
list.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=C1ZV
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Clean ups and miscellaneous bug fixes, in particular for the new
collapse_range and zero_range fallocate functions. In addition,
improve the scalability of adding and remove inodes from the orphan
list"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
ext4: handle symlink properly with inline_data
ext4: fix wrong assert in ext4_mb_normalize_request()
ext4: fix zeroing of page during writeback
ext4: remove unused local variable "stored" from ext4_readdir(...)
ext4: fix ZERO_RANGE test failure in data journalling
ext4: reduce contention on s_orphan_lock
ext4: use sbi in ext4_orphan_{add|del}()
ext4: use EXT_MAX_BLOCKS in ext4_es_can_be_merged()
ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
ext4: remove unnecessary double parentheses
ext4: do not destroy ext4_groupinfo_caches if ext4_mb_init() fails
ext4: make local functions static
ext4: fix block bitmap validation when bigalloc, ^flex_bg
ext4: fix block bitmap initialization under sparse_super2
ext4: find the group descriptors on a 1k-block bigalloc,meta_bg filesystem
ext4: avoid unneeded lookup when xattr name is invalid
ext4: fix data integrity sync in ordered mode
ext4: remove obsoleted check
ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode
ext4: fix locking for O_APPEND writes
...
Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.
The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).
The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During compaction, update_nr_listpages() has been used to count remaining
non-migrated and free pages after a call to migrage_pages(). The
freepages counting has become unneccessary, and it turns out that
migratepages counting is also unnecessary in most cases.
The only situation when it's needed to count cc->migratepages is when
migrate_pages() returns with a negative error code. Otherwise, the
non-negative return value is the number of pages that were not migrated,
which is exactly the count of remaining pages in the cc->migratepages
list.
Furthermore, any non-zero count is only interesting for the tracepoint of
mm_compaction_migratepages events, because after that all remaining
unmigrated pages are put back and their count is set to 0.
This patch therefore removes update_nr_listpages() completely, and changes
the tracepoint definition so that the manual counting is done only when
the tracepoint is enabled, and only when migrate_pages() returns a
negative error code.
Furthermore, migrate_pages() and the tracepoints won't be called when
there's nothing to migrate. This potentially avoids some wasted cycles
and reduces the volume of uninteresting mm_compaction_migratepages events
where "nr_migrated=0 nr_failed=0". In the stress-highalloc mmtest, this
was about 75% of the events. The mm_compaction_isolate_migratepages event
is better for determining that nothing was isolated for migration, and
this one was just duplicating the info.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we are doing NUMA-aware shrinking, and can have shrinkers
running in parallel, or working on individual nodes, it seems like we
should also be sticking the node in the output.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I was looking at a trace of the slab shrinkers (attachment in this comment):
https://bugs.freedesktop.org/show_bug.cgi?id=72742#c67
and noticed that "total_scan" can go negative in some cases. We
used to dump out the "total_scan" variable directly, but some of
the shrinker modifications along the way changed that.
This patch just dumps it out directly, again. It doesn't make
any sense to derive it from new_nr and nr any more since there
are now other shrinkers that can be running in parallel and
mucking with those values.
Here's an example of the negative numbers in the output:
> kswapd0-840 [000] 160.869398: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 10 new scan count 39 total_scan 29 last shrinker return val 256
> kswapd0-840 [000] 160.869618: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 39 new scan count 102 total_scan 63 last shrinker return val 256
> kswapd0-840 [000] 160.870031: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 102 new scan count 47 total_scan -55 last shrinker return val 768
> kswapd0-840 [000] 160.870464: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 47 new scan count 45 total_scan -2 last shrinker return val 768
> kswapd0-840 [000] 163.384144: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 45 new scan count 56 total_scan 11 last shrinker return val 0
> kswapd0-840 [000] 163.384297: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 56 new scan count 15 total_scan -41 last shrinker return val 256
> kswapd0-840 [000] 163.384414: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 15 new scan count 117 total_scan 102 last shrinker return val 0
> kswapd0-840 [000] 163.384657: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 117 new scan count 36 total_scan -81 last shrinker return val 512
> kswapd0-840 [000] 163.384880: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 36 new scan count 111 total_scan 75 last shrinker return val 256
> kswapd0-840 [000] 163.385256: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 111 new scan count 34 total_scan -77 last shrinker return val 768
> kswapd0-840 [000] 163.385598: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 34 new scan count 122 total_scan 88 last shrinker return val 512
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently to allocate a page that should be charged to kmemcg (e.g.
threadinfo), we pass __GFP_KMEMCG flag to the page allocator. The page
allocated is then to be freed by free_memcg_kmem_pages. Apart from
looking asymmetrical, this also requires intrusion to the general
allocation path. So let's introduce separate functions that will
alloc/free pages charged to kmemcg.
The new functions are called alloc_kmem_pages and free_kmem_pages. They
should be used when the caller actually would like to use kmalloc, but
has to fall back to the page allocator for the allocation is large.
They only differ from alloc_pages and free_pages in that besides
allocating or freeing pages they also charge them to the kmem resource
counter of the current memory cgroup.
[sfr@canb.auug.org.au: export kmalloc_order() to modules]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a trace event uses a dynamic array for something other than a string
then there's currently no way the TP_printk() can figure out what size
it is. A __get_dynamic_array_len() is required to know the length.
This also simplifies the __get_bitmask() macro which required it as well,
but instead just hardcoded it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
At this time, majority of changes come from ASoC world while we got a
few new drivers in other places for FireWire and USB. There have been
lots of ASoC core cleanups / refactoring, but very little visible to
external users.
ASoC
- Support for specifying aux CODECs in DT
- Removal of the deprecated mux and enum macros
- More moves towards full componentisation
- Removal of some unused I/O code
- Lots of cleanups, fixes and enhancements to the davinci, Freescale,
Haswell and Realtek drivers
- Several drivers exposed directly in Kconfig for use with simple-card
- GPIO descriptor support for jacks
- More updates and fixes to the Freescale SSI, Intel and rsnd drivers
- New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781,
and Realtek RT5677
HD-audio:
- Clean up Dell headset quirks
- Noise fixes for Dell and Sony laptops
- Thinkpad T440 dock fix
- Realtek codec updates (ALC293,ALC233,ALC3235)
- Tegra HD-audio HDMI support
FireWire-audio:
- FireWire audio stack enhancement (AMDTP, MIDI), support for incoming
isochronous stream and duplex streams with timestamp synchronization
- BeBoB-based devices support
- Fireworks-based device support
USB-audio:
- Behringer BCD2000 USB device support
Misc:
- Clean up of a few old drivers, atmel, fm801, etc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=nxFA
-----END PGP SIGNATURE-----
Merge tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next
Pull sound updates from Takashi Iwai:
"At this time, majority of changes come from ASoC world while we got a
few new drivers in other places for FireWire and USB. There have been
lots of ASoC core cleanups / refactoring, but very little visible to
external users.
ASoC:
- Support for specifying aux CODECs in DT
- Removal of the deprecated mux and enum macros
- More moves towards full componentisation
- Removal of some unused I/O code
- Lots of cleanups, fixes and enhancements to the davinci, Freescale,
Haswell and Realtek drivers
- Several drivers exposed directly in Kconfig for use with
simple-card
- GPIO descriptor support for jacks
- More updates and fixes to the Freescale SSI, Intel and rsnd drivers
- New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651
and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and
ADAU1781, and Realtek RT5677
HD-audio:
- Clean up Dell headset quirks
- Noise fixes for Dell and Sony laptops
- Thinkpad T440 dock fix
- Realtek codec updates (ALC293,ALC233,ALC3235)
- Tegra HD-audio HDMI support
FireWire-audio:
- FireWire audio stack enhancement (AMDTP, MIDI), support for
incoming isochronous stream and duplex streams with timestamp
synchronization
- BeBoB-based devices support
- Fireworks-based device support
USB-audio:
- Behringer BCD2000 USB device support
Misc:
- Clean up of a few old drivers, atmel, fm801, etc"
* tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits)
ASoC: Fix wrong argument for card remove callbacks
ASoC: free jack GPIOs before the sound card is freed
ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation
ASoC: cache: Fix error code when not using ASoC level cache
ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
ASoC: add RT5677 CODEC driver
ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support
ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support
ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
ASoC: Add helper functions to cast from DAPM context to CODEC/platform
ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
ASoC: wm9713: correct mono out PGA sources
ALSA: synth: emux: soundfont.c: Cleaning up memory leak
ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320
ASoC: fsl-ssi: Use regmap
ASoC: fsl-ssi: reorder and document fsl_ssi_private
...
v2: add a __break_lease tracepoint for non-blocking case
Recently, I needed these to help track down a softlockup when recalling a
delegation, but they might be helpful in other situations as well.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Being able to show a cpumask of events can be useful as some events
may affect only some CPUs. There is no standard way to record the
cpumask and converting it to a string is rather expensive during
the trace as traces happen in hotpaths. It would be better to record
the raw event mask and be able to parse it at print time.
The following macros were added for use with the TRACE_EVENT() macro:
__bitmask()
__assign_bitmask()
__get_bitmask()
To test this, I added this to the sched_migrate_task event, which
looked like this:
TRACE_EVENT(sched_migrate_task,
TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus),
TP_ARGS(p, dest_cpu, cpus),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
__field( int, orig_cpu )
__field( int, dest_cpu )
__bitmask( cpumask, num_possible_cpus() )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->orig_cpu = task_cpu(p);
__entry->dest_cpu = dest_cpu;
__assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus());
),
TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s",
__entry->comm, __entry->pid, __entry->prio,
__entry->orig_cpu, __entry->dest_cpu,
__get_bitmask(cpumask))
);
With the output of:
ksmtuned-3613 [003] d..2 485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f
migration/1-13 [001] d..5 485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f
awk-3615 [002] d.H5 485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff
migration/2-18 [002] d..5 485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f
Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com
Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home
Suggested-by: Javi Merino <javi.merino@arm.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The first is a long standing bug that causes bogus data to show up
in the refcnt field of the module_refcnt tracepoint. It was
introduced by a merge conflict resolution back in 2.6.35-rc days.
The result should be refcnt = incs - decs, but instead it did
refcnt = incs + decs.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it
was freed. Moving the location of where the probes are released
solved the problem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTa/GQAAoJEKQekfcNnQGuGGUIAJCkrDZdnliE6f6Ur8aXJoX7
gjkXRMmCjLM/X8yQc1H8YwDbSgaTQNmeyQvBbBZ1hUQBaMf5ft4KuFYMGvQRk3jp
ZheQVumSzsQfO+yp5dRmzJ6H2G0BCInxq9VZyufZkCPUGsMyiIc+7+SGHEfjMgmW
9XFWyfSr09thVlGanr+OTLXfwFm7GMD9nohLKXh9dhi/tO/gHq6lI83HK42Y1bWG
4fZWJjO5GgCVbW4RanB6yr9RIe8NESKl37JYsAZX61iAvT8/mqIYGWx0i/DEGN5Q
ap3WW5QPALLUlvUVgI9Um0KOrotbmKtnRwPeHYDmSQODwuKj5veiLXxL9XdHPLU=
=lt0T
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains two fixes.
The first is a long standing bug that causes bogus data to show up in
the refcnt field of the module_refcnt tracepoint. It was introduced
by a merge conflict resolution back in 2.6.35-rc days.
The result should be 'refcnt = incs - decs', but instead it did
'refcnt = incs + decs'.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it was
freed. Moving the location of where the probes are released solved
the problem"
* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix use of tracepoint funcs after rcu free
trace: module: Maintain a valid user count
The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.
Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.
Use 'count = incs - decs' to compute the user count.
Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 2.6.35
Fixes: c1ab9cab75 "merge conflict resolution"
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds a tracepoint for f2fs_read_data_page to trace when page is
readed by user.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when
pages are fsyncing/flushing.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when
page is writting out.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a tracepoint for f2fs_write_end to trace write op of user.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a tracepoint for f2fs_write_begin to trace write op of user.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In the following commit:
commit 57673c2b0b
Author: Rusty Russell <rusty@rustcorp.com.au>
Date: Mon Mar 31 14:39:57 2014 +1030
Use 'E' instead of 'X' for unsigned module taint flag.
One site has been forgotten in trace events module.h.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The ASoC framework is in the process of migrating all IO operations to regmap.
regmap has its own more sophisticated tracing infrastructure for IO operations,
which means that the ASoC level IO tracing becomes redundant, hence this patch
removes them. There are still a handful of ASoC drivers left that do not use
regmap yet, but hopefully the removal of the ASoC IO tracing will be an
additional incentive to switch to regmap.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.
The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.
This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.
This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently EXT4_MAP_UNINIT is used in dioread_nolock case to mark the
cases where we're using dioread_nolock and we're writing into either
unallocated, or unwritten extent, because we need to make sure that
any DIO write into that inode will wait for the extent conversion.
However EXT4_MAP_UNINIT is not only entirely misleading name but also
unnecessary because we can check for EXT4_MAP_UNWRITTEN in the
dioread_nolock case instead.
This commit removes EXT4_MAP_UNINIT flag.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We had a number of new features in ext4 during this merge window
(ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
there were many more regression and bug fixes this time around. It
didn't help that xfstests hadn't been fully updated to fully stress
test COLLAPSE_RANGE until after -rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=gi42
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"These are regression and bug fixes for ext4.
We had a number of new features in ext4 during this merge window
(ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
there were many more regression and bug fixes this time around. It
didn't help that xfstests hadn't been fully updated to fully stress
test COLLAPSE_RANGE until after -rc1"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
ext4: disable COLLAPSE_RANGE for bigalloc
ext4: fix COLLAPSE_RANGE failure with 1KB block size
ext4: use EINVAL if not a regular file in ext4_collapse_range()
ext4: enforce we are operating on a regular file in ext4_zero_range()
ext4: fix extent merging in ext4_ext_shift_path_extents()
ext4: discard preallocations after removing space
ext4: no need to truncate pagecache twice in collapse range
ext4: fix removing status extents in ext4_collapse_range()
ext4: use filemap_write_and_wait_range() correctly in collapse range
ext4: use truncate_pagecache() in collapse range
ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE
ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabled
ext4: always check ext4_ext_find_extent result
ext4: fix error handling in ext4_ext_shift_extents
ext4: silence sparse check warning for function ext4_trim_extent
ext4: COLLAPSE_RANGE only works on extent-based files
ext4: fix byte order problems introduced by the COLLAPSE_RANGE patches
ext4: use i_size_read in ext4_unaligned_aio()
fs: disallow all fallocate operation on active swapfile
fs: move falloc collapse range check into the filesystem methods
...
In retrospect, this was a bad way to handle things, since it limited
testing of these patches. We should just get the VFS level changes
merged in first.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
design of tracepoints and how a user could register a tracepoint
and have that tracepoint not be activated but no error was shown.
The design was for an out of tree module but broke in tree users.
The clean up was to remove the saving of the hash table of tracepoint
names such that they can be enabled before they exist (enabling
a module tracepoint before that module is loaded). This added more
complexity than needed. The clean up was to remove that code and
just enable tracepoints that exist or fail if they do not.
This removed a lot of code as well as the complexity that it brought.
As a side effect, instead of registering a tracepoint by its name,
the tracepoint needs to be registered with the tracepoint descriptor.
This removes having to duplicate the tracepoint names that are
enabled.
The second patch was added that simplified the way modules were
searched for.
This cleanup required changes that were in the 3.15 queue as well as
some changes that were added late in the 3.14-rc cycle. This final
change waited till the two were merged in upstream and then the
change was added and full tests were run. Unfortunately, the
test found some errors, but after it was already submitted to the
for-next branch and not to be rebased. Sparse errors were detected
by Fengguang Wu's bot tests, and my internal tests discovered that
the anonymous union initialization triggered a bug in older gcc compilers.
Luckily, there was a bugzilla for the gcc bug which gave a work around
to the problem. The third and fourth patch handled the sparse error
and the gcc bug respectively.
A final patch was tagged along to fix a missing documentation for
the README file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTR+pwAAoJEKQekfcNnQGuvfoH/A4XZu4/1h2ZuKhzGi6lrrWr
+zHUQ+JmGiAYRziQFwr2t/gqJ2vmDfHJnbDjKi6Emx8JcxesHas6CQOWps4zEic0
dwYSQjvuGNGFIFt+7I0K1OxfVVdt2PQ2lVrB5WgYdbash5J4Bi+09QBv0RbUKheo
37dKSeN3pbsuQsR70OTVP8laG3dA9IbHW7PsKnxIEB5zeIUHUBME/QdPPj/CuJwk
wxZjXC2dbc3rdRlQjTVtWV3ZkGgZJB0k+JxjvZTA0N6u8Hj8LiFPuNawzf7ceBHx
gc++57+WuMW0f0X/ar5/+3UPGFQKMSvKmdxIQCnWXQz5seTYYKDEx7mTH22fxgg=
=OgeQ
-----END PGP SIGNATURE-----
Merge tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"This includes the final patch to clean up and fix the issue with the
design of tracepoints and how a user could register a tracepoint and
have that tracepoint not be activated but no error was shown.
The design was for an out of tree module but broke in tree users. The
clean up was to remove the saving of the hash table of tracepoint
names such that they can be enabled before they exist (enabling a
module tracepoint before that module is loaded). This added more
complexity than needed. The clean up was to remove that code and just
enable tracepoints that exist or fail if they do not.
This removed a lot of code as well as the complexity that it brought.
As a side effect, instead of registering a tracepoint by its name, the
tracepoint needs to be registered with the tracepoint descriptor.
This removes having to duplicate the tracepoint names that are
enabled.
The second patch was added that simplified the way modules were
searched for.
This cleanup required changes that were in the 3.15 queue as well as
some changes that were added late in the 3.14-rc cycle. This final
change waited till the two were merged in upstream and then the change
was added and full tests were run. Unfortunately, the test found some
errors, but after it was already submitted to the for-next branch and
not to be rebased. Sparse errors were detected by Fengguang Wu's bot
tests, and my internal tests discovered that the anonymous union
initialization triggered a bug in older gcc compilers. Luckily, there
was a bugzilla for the gcc bug which gave a work around to the
problem. The third and fourth patch handled the sparse error and the
gcc bug respectively.
A final patch was tagged along to fix a missing documentation for the
README file"
* tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add missing function triggers dump and cpudump to README
tracing: Fix anonymous unions in struct ftrace_event_call
tracepoint: Fix sparse warnings in tracepoint.c
tracepoint: Simplify tracepoint module search
tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
Pull i2c updates from Wolfram Sang:
"Here is the pull request from the i2c subsystem. It got a little
delayed because I needed to wait for a dependency to be included
(commit b424080a9e08: "reset: Add optional resets and stubs"). Plus,
I had some email problems. All done now, the highlights are:
- drivers can now deprecate their use of i2c classes. That shouldn't
be used on embedded platforms anyhow and was often blindly
copy&pasted. This mechanism gives users time to switch away and
ultimately boot faster once the use of classes for those drivers is
gone for good.
- new drivers for QUP, Cadence, efm32
- tracepoint support for I2C and SMBus
- bigger cleanups for the mv64xxx, nomadik, and designware drivers
And the usual bugfixes, cleanups, feature additions. Most stuff has
been in linux-next for a while. Just some hot fixes and new drivers
were added a bit more recently."
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (63 commits)
i2c: cadence: fix Kconfig dependency
i2c: Add driver for Cadence I2C controller
i2c: cadence: Document device tree bindings
Documentation: i2c: improve section about flags mangling the protocol
i2c: qup: use proper type fro clk_freq
i2c: qup: off by ones in qup_i2c_probe()
i2c: efm32: fix binding doc
MAINTAINERS: update I2C web resources
i2c: qup: New bus driver for the Qualcomm QUP I2C controller
i2c: qup: Add device tree bindings information
i2c: i2c-xiic: deprecate class based instantiation
i2c: i2c-sirf: deprecate class based instantiation
i2c: i2c-mv64xxx: deprecate class based instantiation
i2c: i2c-designware-platdrv: deprecate class based instantiation
i2c: i2c-davinci: deprecate class based instantiation
i2c: i2c-bcm2835: deprecate class based instantiation
i2c: mv64xxx: Fix reset controller handling
i2c: omap: fix usage of IS_ERR_VALUE with pm_runtime_get_sync
i2c: efm32: new bus driver
i2c: exynos5: remove unnecessary cast of void pointer
...
Fix the following sparse warnings:
CHECK kernel/tracepoint.c
kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:184:18: expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:184:18: got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:216:18: expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:216:18: got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:392:24: error: return expression in void function
CC kernel/tracepoint.o
kernel/tracepoint.c: In function tracepoint_module_going:
kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static?
kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.com
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Register/unregister tracepoint probes with struct tracepoint pointer
rather than tracepoint name.
This change, which vastly simplifies tracepoint.c, has been proposed by
Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux
size.
From this point on, the tracers need to pass a struct tracepoint pointer
to probe register/unregister. A probe can now only be connected to a
tracepoint that exists. Moreover, tracers are responsible for
unregistering the probe before the module containing its associated
tracepoint is unloaded.
text data bss dec hex filename
10443444 4282528 10391552 25117524 17f4354 vmlinux.orig
10434930 4282848 10391552 25109330 17f2352 vmlinux
Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com
CC: Ingo Molnar <mingo@kernel.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Frank Ch. Eigler <fche@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ SDR - fixed return val in void func in tracepoint_module_going() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Starting from commit c4ad8f98be ("execve: use 'struct filename *' for
executable name passing") bprm->filename can not go away after
flush_old_exec(), so we do not need to save the binary name in
bprm->tcomm[] added by 96e02d1586 ("exec: fix use-after-free bug in
setup_new_exec()").
And there was never need for filename_to_taskname-like code, we can
simply do set_task_comm(kbasename(filename).
This patch has to change set_task_comm() and trace_task_rename() to
accept "const char *", but I think this change is also good.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
a staging driver; fix included. Greg KH said he'd take the patch
but hadn't as the merge window opened, so it's included here
to avoid breaking build.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=yzUO
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Nothing major: the stricter permissions checking for sysfs broke a
staging driver; fix included. Greg KH said he'd take the patch but
hadn't as the merge window opened, so it's included here to avoid
breaking build"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
staging: fix up speakup kobject mode
Use 'E' instead of 'X' for unsigned module taint flag.
VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
kallsyms: fix percpu vars on x86-64 with relocation.
kallsyms: generalize address range checking
module: LLVMLinux: Remove unused function warning from __param_check macro
Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
module: remove MODULE_GENERIC_TABLE
module: allow multiple calls to MODULE_DEVICE_TABLE() per module
module: use pr_cont
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=4s1Z
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
ext4: fix premature freeing of partial clusters split across leaf blocks
ext4: remove unneeded test of ret variable
ext4: fix comment typo
ext4: make ext4_block_zero_page_range static
ext4: atomically set inode->i_flags in ext4_set_inode_flags()
ext4: optimize Hurd tests when reading/writing inodes
ext4: kill i_version support for Hurd-castrated file systems
ext4: each filesystem creates and uses its own mb_cache
fs/mbcache.c: doucple the locking of local from global data
fs/mbcache.c: change block and index hash chain to hlist_bl_node
ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
ext4: refactor ext4_fallocate code
ext4: Update inode i_size after the preallocation
ext4: fix partial cluster handling for bigalloc file systems
ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
ext4: only call sync_filesystm() when remounting read-only
fs: push sync_filesystem() down to the file system's remount_fs()
jbd2: improve error messages for inconsistent journal heads
jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
jbd2: minimize region locked by j_list_lock in journal_get_create_access()
...
Pull btrfs changes from Chris Mason:
"This is a pretty long stream of bug fixes and performance fixes.
Qu Wenruo has replaced the btrfs async threads with regular kernel
workqueues. We'll keep an eye out for performance differences, but
it's nice to be using more generic code for this.
We still have some corruption fixes and other patches coming in for
the merge window, but this batch is tested and ready to go"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
Btrfs: fix a crash of clone with inline extents's split
btrfs: fix uninit variable warning
Btrfs: take into account total references when doing backref lookup
Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
Btrfs: fix incremental send's decision to delay a dir move/rename
Btrfs: remove unnecessary inode generation lookup in send
Btrfs: fix race when updating existing ref head
btrfs: Add trace for btrfs_workqueue alloc/destroy
Btrfs: less fs tree lock contention when using autodefrag
Btrfs: return EPERM when deleting a default subvolume
Btrfs: add missing kfree in btrfs_destroy_workqueue
Btrfs: cache extent states in defrag code path
Btrfs: fix deadlock with nested trans handles
Btrfs: fix possible empty list access when flushing the delalloc inodes
Btrfs: split the global ordered extents mutex
Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
Btrfs: reclaim delalloc metadata more aggressively
Btrfs: remove unnecessary lock in may_commit_transaction()
Btrfs: remove the unnecessary flush when preparing the pages
Btrfs: just do dirty page flush for the inode with compression before direct IO
...
Pull media updates from Mauro Carvalho Chehab:
"The main set of series of patches for media subsystem, including:
- document RC sysfs class
- added an API to setup scancode to allow waking up systems using the
Remote Controller
- add API for SDR devices. Drivers are still on staging
- some API improvements for getting EDID data from media
inputs/outputs
- new DVB frontend driver for drx-j (ATSC)
- one driver (it913x/it9137) got removed, in favor of an improvement
on another driver (af9035)
- added a skeleton V4L2 PCI driver at documentation
- added a dual flash driver (lm3646)
- added a new IR driver (img-ir)
- added an IR scancode decoder for the Sharp protocol
- some improvements at the usbtv driver, to allow its core to be
reused.
- added a new SDR driver (rtl2832u_sdr)
- added a new tuner driver (msi001)
- several improvements at em28xx driver to fix PM support, device
removal and to split the V4L2 specific bits into a separate
sub-driver
- one driver got converted to videobuf2 (s2255drv)
- the e4000 tuner driver now follows an improved binding model
- some fixes at V4L2 compat32 code
- several fixes and enhancements at videobuf2 code
- some cleanups at V4L2 API documentation
- usual driver enhancements, new board additions and misc fixups"
[ NOTE! This merge effective drops commit 4329b93b28 ("of: Reduce
indentation in of_graph_get_next_endpoint").
The of_graph_get_next_endpoint() function was moved and renamed by
commit fd9fdb78a9 ("[media] of: move graph helpers from
drivers/media/v4l2-core to drivers/of"). It was originally called
v4l2_of_get_next_endpoint() and lived in the file
drivers/media/v4l2-core/v4l2-of.c.
In that original location, it was then fixed to support empty port
nodes by commit b9db140c1e ("[media] v4l: of: Support empty port
nodes"), and that commit clashes badly with the dropped "Reduce
intendation" commit. I had to choose one or the other, and decided
that the "Support empty port nodes" commit was more important ]
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
[media] em28xx: fix PCTV 290e LNA oops
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
[media] m88ds3103: fix bug on .set_tone()
[media] saa7134: fix WARN_ON during resume
[media] v4l2-dv-timings: add module name, description, license
[media] videodev2.h: add parenthesis around macro arguments
[media] saa6752hs: depends on CRC32
[media] si4713: fix Kconfig dependencies
[media] Sensoray 2255 uses videobuf2
[media] adv7180: free an interrupt on failure paths in init_device()
[media] e4000: make VIDEO_V4L2 dependency optional
[media] af9033: Don't export functions for the hardware filter
[media] af9035: use af9033 PID filters
[media] af9033: implement PID filter
[media] rtl2832_sdr: do not use dynamic stack allocation
[media] e4000: fix 32-bit build error
[media] em28xx-audio: make sure audio is unmuted on open()
[media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
...
But there were a few features that were added.
Uprobes now work with event triggers and multi buffers.
Uprobes have support under ftrace and perf.
The big feature is that the function tracer can now be used within the
multi buffer instances. That is, you can now trace some functions
in one buffer, others in another buffer, all functions in a third buffer
and so on. They are basically agnostic from each other. This only
works for the function tracer and not for the function graph trace,
although you can have the function graph tracer running in the top level
buffer (or any tracer for that matter) and have different function tracing
going on in the sub buffers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
+Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
=HdXY
-----END PGP SIGNATURE-----
Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added:
Uprobes now work with event triggers and multi buffers and have
support under ftrace and perf.
The big feature is that the function tracer can now be used within the
multi buffer instances. That is, you can now trace some functions in
one buffer, others in another buffer, all functions in a third buffer
and so on. They are basically agnostic from each other. This only
works for the function tracer and not for the function graph trace,
although you can have the function graph tracer running in the top
level buffer (or any tracer for that matter) and have different
function tracing going on in the sub buffers"
* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
tracing: Add BUG_ON when stack end location is over written
tracepoint: Remove unused API functions
Revert "tracing: Move event storage for array from macro to standalone function"
ftrace: Constify ftrace_text_reserved
tracepoints: API doc update to tracepoint_probe_register() return value
tracepoints: API doc update to data argument
ftrace: Fix compilation warning about control_ops_free
ftrace/x86: BUG when ftrace recovery fails
ftrace: Warn on error when modifying ftrace function
ftrace: Remove freelist from struct dyn_ftrace
ftrace: Do not pass data to ftrace_dyn_arch_init
ftrace: Pass retval through return in ftrace_dyn_arch_init()
ftrace: Inline the code from ftrace_dyn_table_alloc()
ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
tracing: Evaluate len expression only once in __dynamic_array macro
tracing: Correctly expand len expressions from __dynamic_array macro
tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
tracing: Fix event header migrate.h to include tracepoint.h
tracing: Fix event header writeback.h to include tracepoint.h
tracing: Warn if a tracepoint is not set via debugfs
...
Pull networking updates from David Miller:
"Here is my initial pull request for the networking subsystem during
this merge window:
1) Support for ESN in AH (RFC 4302) from Fan Du.
2) Add full kernel doc for ethtool command structures, from Ben
Hutchings.
3) Add BCM7xxx PHY driver, from Florian Fainelli.
4) Export computed TCP rate information in netlink socket dumps, from
Eric Dumazet.
5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
Dichtel.
6) Convert many drivers to pci_enable_msix_range(), from Alexander
Gordeev.
7) Record SKB timestamps more efficiently, from Eric Dumazet.
8) Switch to microsecond resolution for TCP round trip times, also
from Eric Dumazet.
9) Clean up and fix 6lowpan fragmentation handling by making use of
the existing inet_frag api for it's implementation.
10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.
11) Auto size SKB lengths when composing netlink messages based upon
past message sizes used, from Eric Dumazet.
12) qdisc dumps can take a long time, add a cond_resched(), From Eric
Dumazet.
13) Sanitize netpoll core and drivers wrt. SKB handling semantics.
Get rid of never-used-in-tree netpoll RX handling. From Eric W
Biederman.
14) Support inter-address-family and namespace changing in VTI tunnel
driver(s). From Steffen Klassert.
15) Add Altera TSE driver, from Vince Bridgers.
16) Optimizing csum_replace2() so that it doesn't adjust the checksum
by checksumming the entire header, from Eric Dumazet.
17) Expand BPF internal implementation for faster interpreting, more
direct translations into JIT'd code, and much cleaner uses of BPF
filtering in non-socket ocntexts. From Daniel Borkmann and Alexei
Starovoitov"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
net: Add a test to see if a skb is freeable in irq context
qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
net: ptp: move PTP classifier in its own file
net: sxgbe: make "core_ops" static
net: sxgbe: fix logical vs bitwise operation
net: sxgbe: sxgbe_mdio_register() frees the bus
Call efx_set_channels() before efx->type->dimension_resources()
xen-netback: disable rogue vif in kthread context
net/mlx4: Set proper build dependancy with vxlan
be2net: fix build dependency on VxLAN
mac802154: make csma/cca parameters per-wpan
mac802154: allow only one WPAN to be up at any given time
net: filter: minor: fix kdoc in __sk_run_filter
netlink: don't compare the nul-termination in nla_strcmp
can: c_can: Avoid led toggling for every packet.
can: c_can: Simplify TX interrupt cleanup
can: c_can: Store dlc private
can: c_can: Reduce register access
can: c_can: Make the code readable
...
Pull block driver update from Jens Axboe:
"On top of the core pull request, here's the pull request for the
driver related changes for 3.15. It contains:
- Improvements for msi-x registration for block drivers (mtip32xx,
skd, cciss, nvme) from Alexander Gordeev.
- A round of cleanups and improvements for drbd from Andreas
Gruenbacher and Rashika Kheria.
- A round of clanups and improvements for bcache from Kent.
- Removal of sleep_on() and friends in DAC960, ataflop, swim3 from
Arnd Bergmann.
- Bug fix for a bug in the mtip32xx async completion code from Sam
Bradshaw.
- Bug fix for accidentally bouncing IO on 32-bit platforms with
mtip32xx from Felipe Franciosi"
* 'for-3.15/drivers' of git://git.kernel.dk/linux-block: (103 commits)
bcache: remove nested function usage
bcache: Kill bucket->gc_gen
bcache: Kill unused freelist
bcache: Rework btree cache reserve handling
bcache: Kill btree_io_wq
bcache: btree locking rework
bcache: Fix a race when freeing btree nodes
bcache: Add a real GC_MARK_RECLAIMABLE
bcache: Add bch_keylist_init_single()
bcache: Improve priority_stats
bcache: Better alloc tracepoints
bcache: Kill dead cgroup code
bcache: stop moving_gc marking buckets that can't be moved.
bcache: Fix moving_pred()
bcache: Fix moving_gc deadlocking with a foreground write
bcache: Fix discard granularity
bcache: Fix another bug recovering from unclean shutdown
bcache: Fix a bug recovering from unclean shutdown
bcache: Fix a journalling reclaim after recovery bug
bcache: Fix a null ptr deref in journal replay
...
Pull core block layer updates from Jens Axboe:
"This is the pull request for the core block IO bits for the 3.15
kernel. It's a smaller round this time, it contains:
- Various little blk-mq fixes and additions from Christoph and
myself.
- Cleanup of the IPI usage from the block layer, and associated
helper code. From Frederic Weisbecker and Jan Kara.
- Duplicate code cleanup in bio-integrity from Gu Zheng. This will
give you a merge conflict, but that should be easy to resolve.
- blk-mq notify spinlock fix for RT from Mike Galbraith.
- A blktrace partial accounting bug fix from Roman Pen.
- Missing REQ_SYNC detection fix for blk-mq from Shaohua Li"
* 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits)
blk-mq: add REQ_SYNC early
rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock
blk-mq: support partial I/O completions
blk-mq: merge blk_mq_insert_request and blk_mq_run_request
blk-mq: remove blk_mq_alloc_rq
blk-mq: don't dump CPU -> hw queue map on driver load
blk-mq: fix wrong usage of hctx->state vs hctx->flags
blk-mq: allow blk_mq_init_commands() to return failure
block: remove old blk_iopoll_enabled variable
blktrace: fix accounting of partially completed requests
smp: Rename __smp_call_function_single() to smp_call_function_single_async()
smp: Remove wait argument from __smp_call_function_single()
watchdog: Simplify a little the IPI call
smp: Move __smp_call_function_single() below its safe version
smp: Consolidate the various smp_call_function_single() declensions
smp: Teach __smp_call_function_single() to check for offline cpus
smp: Remove unused list_head from csd
smp: Iterate functions through llist_for_each_entry_safe()
block: Stop abusing rq->csd.list in blk-softirq
block: Remove useless IPI struct initialization
...
There have been lots of changes in ALSA core, HD-audio and ASoC, also
most of PCI drivers touched by conversions of printks. All these
resulted in a high volume and wide ranged patch sets in this release.
Many changes are fairly trivial, but also lots of nice cleanups and
refactors. There are a few new drivers, most notably, the Intel
Haswell and Baytrail ASoC driver.
Core changes:
- A bit modernization; embed the device struct into snd_card struct,
so that it may be referred from the beginning. A new snd_card_new()
function is introduced for that, and all drivers have been
converted.
- Simplification in the device management code in ALSA core;
now managed by a simple priority list instead
- Converted many kernel messages to use the standard dev_err() & co;
this would be the pretty visible difference, especially for
HD-audio.
HD-audio:
- Conexant codecs use the auto-parser as default now;
the old static code still remains in case of regressions.
Some old quirks have been rewritten with the fixups for auto-parser.
- C-Media codecs also use the auto-parser as default now, too.
- A device struct is assigned to each HD-audio codec, and the formerly
hwdep attributes are accessible over the codec sysfs, too.
hwdep attributes still remain for compatibility.
- Split the PCI-specific stuff for HD-audio controller into a separate
module, ane make a helper module for the generic controller driver.
This is a preliminary change for supporting Tegra HDMI controller in
near future, which slipped from 3.15 merge.
- Device-specific fixes: mute LED support for Lenovo Ideapad,
mic LED fix for HP laptops, more ASUS subwoofer quirks, yet more
Dell laptop headset quirks
- Make the HD-audio codec response a bit more robust
- A few improvements on Realtek ALC282 / 283 about the pop noises
- A couple of Intel HDMI fixes
ASoC:
- Lots of cleanups for enumerations; refactored lots of error prone
original codes to use more modern APIs
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues
- DPCM support for Intel Haswell and Bay Trail platforms, lots of
fixes
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
- Fixes for the simple-card DAI format DT mess
- DT support for a couple more devices.
- Use of the tdm_slot mapping in a few drivers
Others:
- Support of reset_resume callback for improved S4 in USB-audio driver;
the device with boot quirks have been little tested, which we need
to watch out in this development cycle
- Add PM support for ICE1712 driver (finally!);
it's still pretty partial support, only for M-Audio devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Y476
-----END PGP SIGNATURE-----
Merge tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been lots of changes in ALSA core, HD-audio and ASoC, also
most of PCI drivers touched by conversions of printks. All these
resulted in a high volume and wide ranged patch sets in this release.
Many changes are fairly trivial, but also lots of nice cleanups and
refactors. There are a few new drivers, most notably, the Intel
Haswell and Baytrail ASoC driver.
Core changes:
- A bit modernization; embed the device struct into snd_card struct,
so that it may be referred from the beginning. A new
snd_card_new() function is introduced for that, and all drivers
have been converted.
- Simplification in the device management code in ALSA core; now
managed by a simple priority list instead
- Converted many kernel messages to use the standard dev_err() & co;
this would be the pretty visible difference, especially for
HD-audio.
HD-audio:
- Conexant codecs use the auto-parser as default now; the old static
code still remains in case of regressions. Some old quirks have
been rewritten with the fixups for auto-parser.
- C-Media codecs also use the auto-parser as default now, too.
- A device struct is assigned to each HD-audio codec, and the
formerly hwdep attributes are accessible over the codec sysfs, too.
hwdep attributes still remain for compatibility.
- Split the PCI-specific stuff for HD-audio controller into a
separate module, ane make a helper module for the generic
controller driver. This is a preliminary change for supporting
Tegra HDMI controller in near future, which slipped from 3.15
merge.
- Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED
fix for HP laptops, more ASUS subwoofer quirks, yet more Dell
laptop headset quirks
- Make the HD-audio codec response a bit more robust
- A few improvements on Realtek ALC282 / 283 about the pop noises
- A couple of Intel HDMI fixes
ASoC:
- Lots of cleanups for enumerations; refactored lots of error prone
original codes to use more modern APIs
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle
- Provide both manually and transparently locked DAPM APIs rather
than a mix of the two fixing some concurrency issues
- Start converting CODEC drivers to use separate bus interface
drivers rather than having them all in one file helping avoid
dependency issues
- DPCM support for Intel Haswell and Bay Trail platforms, lots of
fixes
- Lots of work on improvements for simple-card, DaVinci and the
Renesas rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of
the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
- Fixes for the simple-card DAI format DT mess
- DT support for a couple more devices.
- Use of the tdm_slot mapping in a few drivers
Others:
- Support of reset_resume callback for improved S4 in USB-audio
driver; the device with boot quirks have been little tested, which
we need to watch out in this development cycle
- Add PM support for ICE1712 driver (finally!); it's still pretty
partial support, only for M-Audio devices"
* tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits)
ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards
ALSA: ice1712: add suspend support for ICE1712 chip
ALSA: hda - Enable beep for ASUS 1015E
ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()
ALSA: hda - add headset mic detect quirks for three Dell laptops
ASoC: tegra: move AC97 clock handling to the machine driver
ASoC: simple-card: Handle many DAI links
ASoC: simple-card: Add DT documentation for multi-DAI links
ASoC: simple-card: dynamically allocate the DAI link and properties
ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support.
ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support.
ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
ASoC: rcar: subnode tidyup for renesas,rsnd.txt
ASoC: Remove name_prefix unset during DAI link init hack
ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
ASoC: rcar: bugfix: it cares about the non-src case
ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags
ASoC: pcm: Drop incorrect double/extra frees
ASoC: mfld_machine: Fix compile error
...
- Device PM QoS support for latency tolerance constraints on systems with
hardware interfaces allowing such constraints to be specified. That is
necessary to prevent hardware-driven power management from becoming
overly aggressive on some systems and to prevent power management
features leading to excessive latencies from being used in some cases.
- Consolidation of the handling of ACPI hotplug notifications for device
objects. This causes all device hotplug notifications to go through
the root notify handler (that was executed for all of them anyway
before) that propagates them to individual subsystems, if necessary,
by executing callbacks provided by those subsystems (those callbacks
are associated with struct acpi_device objects during device
enumeration). As a result, the code in question becomes both smaller
in size and more straightforward and all of those changes should not
affect users.
- ACPICA update, including fixes related to the handling of _PRT in cases
when it is broken and the addition of "Windows 2013" to the list of
supported "features" for _OSI (which is necessary to support systems
that work incorrectly or don't even boot without it). Changes from
Bob Moore and Lv Zheng.
- Consolidation of ACPI _OST handling from Jiang Liu.
- ACPI battery and AC fixes allowing unusual system configurations to
be handled by that code from Alexander Mezin.
- New device IDs for the ACPI LPSS driver from Chiau Ee Chew.
- ACPI fan and thermal optimizations related to system suspend and resume
from Aaron Lu.
- Cleanups related to ACPI video from Jean Delvare.
- Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan Tianyu,
Paul Bolle, Tomasz Nowicki.
- Intel RAPL (Running Average Power Limits) driver cleanups from Jacob Pan.
- intel_pstate fixes and cleanups from Dirk Brandewie.
- cpufreq fixes related to system suspend/resume handling from Viresh Kumar.
- cpufreq core fixes and cleanups from Viresh Kumar, Stratos Karafotis,
Saravana Kannan, Rashika Kheria, Joe Perches.
- cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob Herring.
- cpuidle fixes related to the menu governor from Tuukka Tikkanen.
- cpuidle fix related to coupled CPUs handling from Paul Burton.
- Asynchronous execution of all device suspend and resume callbacks,
except for ->prepare and ->complete, during system suspend and resume
from Chuansheng Liu.
- Delayed resuming of runtime-suspended devices during system suspend for
the PCI bus type and ACPI PM domain.
- New set of PM helper routines to allow device runtime PM callbacks to
be used during system suspend and resume more easily from Ulf Hansson.
- Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.
- devfreq fix from Saravana Kannan.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ywR6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"The majority of this material spent some time in linux-next, some of
it even several weeks. There are a few relatively fresh commits in
it, but they are mostly fixes and simple cleanups.
ACPI took the lead this time, both in terms of the number of commits
and the number of modified lines of code, cpufreq follows and there
are a few changes in the PM core and in cpuidle too.
A new feature that already got some LWN.net's attention is the device
PM QoS extension allowing latency tolerance requirements to be
propagated from leaf devices to their ancestors with hardware
interfaces for specifying latency tolerance. That should help systems
with hardware-driven power management to avoid going too far with it
in cases when there are latency tolerance constraints.
There also are some significant changes in the ACPI core related to
the way in which hotplug notifications are handled. They affect PCI
hotplug (ACPIPHP) and the ACPI dock station code too. The bottom line
is that all those notification now go through the root notify handler
and are propagated to the interested subsystems by means of callbacks
instead of having to install a notify handler for each device object
that we can potentially get hotplug notifications for.
In addition to that ACPICA will now advertise "Windows 2013"
compatibility for _OSI, because some systems out there don't work
correctly if that is not done (some of them don't even boot).
On the system suspend side of things, all of the device suspend and
resume callbacks, except for ->prepare() and ->complete(), are now
going to be executed asynchronously as that turns out to speed up
system suspend and resume on some platforms quite significantly and we
have a few more optimizations in that area.
Apart from that, there are some new device IDs and fixes and cleanups
all over. In particular, the system suspend and resume handling by
cpufreq should be improved and the cpuidle menu governor should be a
bit more robust now.
Specifics:
- Device PM QoS support for latency tolerance constraints on systems
with hardware interfaces allowing such constraints to be specified.
That is necessary to prevent hardware-driven power management from
becoming overly aggressive on some systems and to prevent power
management features leading to excessive latencies from being used
in some cases.
- Consolidation of the handling of ACPI hotplug notifications for
device objects. This causes all device hotplug notifications to go
through the root notify handler (that was executed for all of them
anyway before) that propagates them to individual subsystems, if
necessary, by executing callbacks provided by those subsystems
(those callbacks are associated with struct acpi_device objects
during device enumeration). As a result, the code in question
becomes both smaller in size and more straightforward and all of
those changes should not affect users.
- ACPICA update, including fixes related to the handling of _PRT in
cases when it is broken and the addition of "Windows 2013" to the
list of supported "features" for _OSI (which is necessary to
support systems that work incorrectly or don't even boot without
it). Changes from Bob Moore and Lv Zheng.
- Consolidation of ACPI _OST handling from Jiang Liu.
- ACPI battery and AC fixes allowing unusual system configurations to
be handled by that code from Alexander Mezin.
- New device IDs for the ACPI LPSS driver from Chiau Ee Chew.
- ACPI fan and thermal optimizations related to system suspend and
resume from Aaron Lu.
- Cleanups related to ACPI video from Jean Delvare.
- Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan
Tianyu, Paul Bolle, Tomasz Nowicki.
- Intel RAPL (Running Average Power Limits) driver cleanups from
Jacob Pan.
- intel_pstate fixes and cleanups from Dirk Brandewie.
- cpufreq fixes related to system suspend/resume handling from Viresh
Kumar.
- cpufreq core fixes and cleanups from Viresh Kumar, Stratos
Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches.
- cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob
Herring.
- cpuidle fixes related to the menu governor from Tuukka Tikkanen.
- cpuidle fix related to coupled CPUs handling from Paul Burton.
- Asynchronous execution of all device suspend and resume callbacks,
except for ->prepare and ->complete, during system suspend and
resume from Chuansheng Liu.
- Delayed resuming of runtime-suspended devices during system suspend
for the PCI bus type and ACPI PM domain.
- New set of PM helper routines to allow device runtime PM callbacks
to be used during system suspend and resume more easily from Ulf
Hansson.
- Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.
- devfreq fix from Saravana Kannan"
* tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs
PM / sleep: Correct whitespace errors in <linux/pm.h>
intel_pstate: Set core to min P state during core offline
cpufreq: Add stop CPU callback to cpufreq_driver interface
cpufreq: Remove unnecessary braces
cpufreq: Fix checkpatch errors and warnings
cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
MAINTAINERS: Reorder maintainer addresses for PM and ACPI
PM / Runtime: Update runtime_idle() documentation for return value meaning
video / output: Drop display output class support
fujitsu-laptop: Drop unneeded include
acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL
ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
ACPI / video: fix ACPI_VIDEO dependencies
cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
cpufreq: Do not allow ->setpolicy drivers to provide ->target
cpufreq: arm_big_little: set 'physical_cluster' for each CPU
cpufreq: arm_big_little: make vexpress driver depend on bL core driver
ACPI / button: Add ACPI Button event via netlink routine
ACPI: Remove duplicate definitions of PREFIX
...
The packet hash can be considered a property of the packet, not just
on RX path.
This patch changes name of rxhash and l4_rxhash skbuff fields to be
hash and l4_hash respectively. This includes changing uses of the
field in the code which don't call the access functions.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C5oo
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.15' into asoc-next
ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:
- Lots of cleanups from Takashi for enumerations; the original API for
these was error prone so he's refactored lots of code to use more
modern APIs which avoid issues.
- Elimination of the ASoC level wrappers for I2C and SPI moving us
closer to converting to regmap completely and avoiding some
randconfig hassle.
- Provide both manually and transparently locked DAPM APIs rather than
a mix of the two fixing some concurrency issues.
- Start converting CODEC drivers to use separate bus interface drivers
rather than having them all in one file helping avoid dependency
issues.
- DPCM support for Intel Haswell and Bay Trail platforms.
- Lots of work on improvements for simple-card, DaVinci and the Renesas
rcar drivers.
- New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
CSR SiRF SoC.
# gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
I originally wrote commit 35bb4399bd to shrink the size of the overhead of
tracepoints by several kilobytes. Later, I received a patch from Vaibhav
Nagarnaik that fixed a bug in the same code that this commit touches. Not
only did it fix a bug, it also removed code and shrunk the size of the
overhead of trace events even more than this commit did.
Since this commit is scheduled for 3.15 and Vaibhav's patch is already in
mainline, I need to revert this patch in order to keep it from conflicting
with Vaibhav's patch. Not to mention, Vaibhav's patch makes this patch
obsolete.
Link: http://lkml.kernel.org/r/20140320225637.0226041b@gandalf.local.home
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since most of the btrfs_workqueue is printed as pointer address,
for easier analysis, add trace for btrfs_workqueue alloc/destroy.
So it is possible to determine the workqueue that a given work belongs
to(by comparing the wq pointer address with alloc trace event).
Signed-off-by: Qu Wenruo <quenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
In event format strings, the array size is reported in two locations.
One in array subscript and then via the "size:" attribute. The values
reported there have a mismatch.
For e.g., in sched:sched_switch the prev_comm and next_comm character
arrays have subscript values as [32] where as the actual field size is
16.
name: sched_switch
ID: 301
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1;signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[32]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[32]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
After bisection, the following commit was blamed:
92edca0 tracing: Use direct field, type and system names
This commit removes the duplication of strings for field->name and
field->type assuming that all the strings passed in
__trace_define_field() are immutable. This is not true for arrays, where
the type string is created in event_storage variable and field->type for
all array fields points to event_storage.
Use __stringify() to create a string constant for the type string.
Also, get rid of event_storage and event_storage_mutex that are not
needed anymore.
also, an added benefit is that this reduces the overhead of events a bit more:
text data bss dec hex filename
8424787 2036472 1302528 11763787 b3804b vmlinux
8420814 2036408 1302528 11759750 b37086 vmlinux.patched
Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com
Cc: Laurent Chavey <chavey@google.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.
It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents
This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.
Also add appropriate tracepoints.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This was originally added as at optimization that for various reasons isn't
needed anymore, but it does add a lot of nasty corner cases (and it was
responsible for some recently fixed bugs). Just get rid of it now.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Change the invalidate tracepoint to indicate how much data we're invalidating,
and change the alloc tracepoints to indicate what offset they're for.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
The SMBUS tracepoints can be enabled thusly:
echo 1 >/sys/kernel/debug/tracing/events/i2c/enable
and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
that look like:
... smbus_read: i2c-0 a=051 f=0000 c=fa BYTE_DATA
... smbus_reply: i2c-0 a=051 f=0000 c=fa BYTE_DATA l=1 [39]
... smbus_result: i2c-0 a=051 f=0000 c=fa BYTE_DATA rd res=0
formatted as:
i2c-<adapter-nr>
a=<addr>
f=<flags>
c=<command>
<protocol-name>
<rd|wr>
res=<result>
l=<data-len>
[<data-block>]
The adapters to be traced can be selected by something like:
echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter
Note that this shares the same filter and enablement as i2c.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add tracepoints into the I2C message transfer function to retrieve the message
sent or received. The following config options must be turned on to make use
of the facility:
CONFIG_FTRACE
CONFIG_ENABLE_DEFAULT_TRACERS
The I2C tracepoint can be enabled thusly:
echo 1 >/sys/kernel/debug/tracing/events/i2c/enable
and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
that look like:
... i2c_write: i2c-5 #0 a=044 f=0000 l=2 [02-14]
... i2c_read: i2c-5 #1 a=044 f=0001 l=4
... i2c_reply: i2c-5 #1 a=044 f=0001 l=4 [33-00-00-00]
... i2c_result: i2c-5 n=2 ret=2
formatted as:
i2c-<adapter-nr>
#<message-array-index>
a=<addr>
f=<flags>
l=<datalen>
n=<message-array-size>
ret=<result>
[<data>]
The operation is done between the i2c_write/i2c_read lines and the i2c_reply
and i2c_result lines so that if the hardware hangs, the trace buffer can be
consulted to determine the problematic operation.
The adapters to be traced can be selected by something like:
echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter
These changes are based on code from Steven Rostedt.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
[wsa: adapted path for 'enable' in the commit msg]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Users have reported being unable to trace non-signed modules loaded
within a kernel supporting module signature.
This is caused by tracepoint.c:tracepoint_module_coming() refusing to
take into account tracepoints sitting within force-loaded modules
(TAINT_FORCED_MODULE). The reason for this check, in the first place, is
that a force-loaded module may have a struct module incompatible with
the layout expected by the kernel, and can thus cause a kernel crash
upon forced load of that module on a kernel with CONFIG_TRACEPOINTS=y.
Tracepoints, however, specifically accept TAINT_OOT_MODULE and
TAINT_CRAP, since those modules do not lead to the "very likely system
crash" issue cited above for force-loaded modules.
With kernels having CONFIG_MODULE_SIG=y (signed modules), a non-signed
module is tainted re-using the TAINT_FORCED_MODULE taint flag.
Unfortunately, this means that Tracepoints treat that module as a
force-loaded module, and thus silently refuse to consider any tracepoint
within this module.
Since an unsigned module does not fit within the "very likely system
crash" category of tainting, add a new TAINT_UNSIGNED_MODULE taint flag
to specifically address this taint behavior, and accept those modules
within Tracepoints. We use the letter 'X' as a taint flag character for
a module being loaded that doesn't know how to sign its name (proposed
by Steven Rostedt).
Also add the missing 'O' entry to trace event show_module_flags() list
for the sake of completeness.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
NAKed-by: Ingo Molnar <mingo@redhat.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: David Howells <dhowells@redhat.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add ftrace for btrfs_workqueue for further workqueue tunning.
This patch needs to applied after the workqueue replace patchset.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Highlights include:
- Fix another nfs4_sequence corruptor in RELEASE_LOCKOWNER
- Fix an Oopsable delegation callback race
- Fix another bad stateid infinite loop
- Fail the data server I/O is the stateid represents a lost lock
- Fix an Oopsable sunrpc trace event
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JfQx
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Fix another nfs4_sequence corruptor in RELEASE_LOCKOWNER
- Fix an Oopsable delegation callback race
- Fix another bad stateid infinite loop
- Fail the data server I/O is the stateid represents a lost lock
- Fix an Oopsable sunrpc trace event"
* tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix oops when trace sunrpc_task events in nfs client
NFSv4: Fail the truncate() if the lock/open stateid is invalid
NFSv4.1 Fail data server I/O if stateid represents a lost lock
NFSv4: Fix the return value of nfs4_select_rw_stateid
NFSv4: nfs4_stateid_is_current should return 'true' for an invalid stateid
NFS: Fix a delegation callback race
NFSv4: Fix another nfs4_sequence corruptor
Use a temporary variable to store the expansion of the len expression.
If the evaluation is expensive, this commit will ensure it is evaluated
only once inside ftrace_get_offsets_<call>.
Link: http://lkml.kernel.org/r/1393651938-16418-3-git-send-email-filbranden@google.com
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This fixes expansion of the len argument in __dynamic_array macros.
The previous code from commit 7d536cb3f would not fully evaluate the
expression before multiplying its result by the size of the type.
This went unnoticed because the length stored in the high 16 bits of the
offset (which is the one that was broken here) is only used by
filter_pred_strloc which only acts on strings for which the size of the
type is 1.
Link: http://lkml.kernel.org/r/1393651938-16418-2-git-send-email-filbranden@google.com
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event headers are required to include tracepoint.h. The only reason
they worked now is because module.h included tracepoint.h, and that will soon
change.
Link: http://lkml.kernel.org/r/20140226190644.591040764@goodmis.org
Fixes: 7b2a2d4a18 "mm: migrate: Add a tracepoint for migrate_pages"
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event headers are required to include tracepoint.h. The only reason
they worked now is because module.h included tracepoint.h, and that will soon
change.
Link: http://lkml.kernel.org/r/20140226190644.442886305@goodmis.org
Fixes: 455b286468 "writeback: Initial tracing support"
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions that assign the contents for the ftrace events are
defined by the TRACE_EVENT() macros. Each event has its own unique
way to assign data to its buffer. When you have over 500 events,
that means there's 500 functions assigning data uniquely for each
event (not really that many, as DECLARE_EVENT_CLASS() and multiple
DEFINE_EVENT()s will only need a single function).
By making helper functions in the core kernel to do some of the work
instead, we can shrink the size of the kernel down a bit.
With a kernel configured with 502 events, the change in size was:
text data bss dec hex filename
12987390 1913504 9785344 24686238 178ae9e /tmp/vmlinux
12959102 1913504 9785344 24657950 178401e /tmp/vmlinux.patched
That's a total of 28288 bytes, which comes down to 56 bytes per event.
Link: http://lkml.kernel.org/r/20120810034708.370808175@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code that shows array fields for events is defined for all events.
This can add up quite a bit when you have over 500 events.
By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.
With a kernel configured with 502 events, the change in size was:
text data bss dec hex filename
12990946 1913568 9785344 24689858 178bcc2 /tmp/vmlinux
12987390 1913504 9785344 24686238 178ae9e /tmp/vmlinux.patched
That's a total of 3556 bytes, which comes down to 7 bytes per event.
Although it's not much, this code is just called at initialization of
the events.
Link: http://lkml.kernel.org/r/20120810034708.084036335@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code for trace events to format the raw recorded event data
into human readable format in the 'trace' file is repeated for every
event in the system. When you have over 500 events, this can add up
quite a bit.
By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.
With a kernel configured with 502 events, the change in size was:
text data bss dec hex filename
12991007 1913568 9785344 24689919 178bcff /tmp/vmlinux.orig
12990946 1913568 9785344 24689858 178bcc2 /tmp/vmlinux.patched
Note, this version does not save as much as the version of this patch
I had a few years ago. That is because in the mean time, commit
f71130de5c ("tracing: Add a helper function for event print functions")
did a lot of the work my original patch did. But this change helps
slightly, and is part of a larger clean up to reduce the size much further.
Link: http://lkml.kernel.org/r/20120810034707.378538034@goodmis.org
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_block_rq_complete does not take into account that request can
be partially completed, so we can get the following incorrect output
of blkparser:
C R 232 + 240 [0]
C R 240 + 232 [0]
C R 248 + 224 [0]
C R 256 + 216 [0]
but should be:
C R 232 + 8 [0]
C R 240 + 8 [0]
C R 248 + 8 [0]
C R 256 + 8 [0]
Also, the whole output summary statistics of completed requests and
final throughput will be incorrect.
This patch takes into account real completion size of the request and
fixes wrong completion accounting.
Signed-off-by: Roman Pen <r.peniaev@gmail.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: linux-kernel@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Add new V4L2 stream format definition, V4L2_BUF_TYPE_SDR_CAPTURE,
for SDR receiver.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for Ext4.
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
blocks which are present in this range and than updates all the logical
offsets of extents beyond "offset + len" to nullify the hole created by
removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This reverts commit c4a391b53a. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.
CC: stable@vger.kernel.org # >= 3.13
Signed-off-by: Jan Kara <jack@suse.cz>
Remove the reporting of energy since it does not provide any useful
information about the state of the driver and will be a maintainance
headache going forward since the RAPL energy units register is not
architectural and subject to change between micro-architectures
References: https://bugzilla.kernel.org/show_bug.cgi?id=69831
Fixes: b69880f9cc (intel_pstate: Add trace point to report internal state.)
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename symbols, variables, functions and structure fields related do
the resume latency device PM QoS type so that it is clear where they
belong (in particular, to avoid confusion with the latency tolerance
device PM QoS type introduced by a subsequent changeset).
Update the PM QoS documentation to better reflect its current state.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull media updates from Mauro Carvalho Chehab:
- a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
- a new dvb frontend for ds2103 chipset (m88ds2103)
- a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
- new drivers for R-Car VSP1
- a new radio driver: radio-raremono
- a new tuner driver for ts2022 chipset (m88ts2022)
- the analog part of em28xx is now a separate module that only
load/runs if the device is not a pure digital TV device
- added a staging driver for bcm2048 radio devices
- the omap 2 video driver (omap24xx) was moved to staging. This driver
is for an old hardware and uses a deprecated Kernel internal API. If
nobody cares enough to fix it, it would be removed on a couple Kernel
releases
- the sn9c102 driver was moved to staging. This driver was replaced by
gspca, and disabled on some distros, as almost all devices are known
to work properly with gspca. It should be removed from kernel on a
couple Kernel releases
- lots of driver fixes, improvements and cleanups
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
[media] media: v4l2-dev: fix video device index assignment
[media] rc-core: reuse device numbers
[media] em28xx-cards: properly initialize the device bitmap
[media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
[media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
[media] Staging: media: Fix quoted string split across line in as102_fe.c
[media] media: st-rc: Add reset support
[media] m2m-deinterlace: fix allocated struct type
[media] radio-usb-si4713: fix sparse non static symbol warnings
[media] em28xx-audio: remove needless check before usb_free_coherent()
[media] au0828: Fix sparse non static symbol warning
Revert "[media] go7007-usb: only use go->dev after allocated"
[media] em28xx-audio: provide an error code when URB submit fails
[media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
[media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
[media] em28xx: make 'em28xx_ctrl_ops' static
em28xx-alsa: Fix error patch for init/fini
[media] em28xx-audio: flush work at .fini
[media] drxk: remove the option to load firmware asynchronously
[media] em28xx: adjust period size at runtime
...
Pull btrfs updates from Chris Mason:
"This is a pretty big pull, and most of these changes have been
floating in btrfs-next for a long time. Filipe's properties work is a
cool building block for inheriting attributes like compression down on
a per inode basis.
Jeff Mahoney kicked in code to export filesystem info into sysfs.
Otherwise, lots of performance improvements, cleanups and bug fixes.
Looks like there are still a few other small pending incrementals, but
I wanted to get the bulk of this in first"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (149 commits)
Btrfs: fix spin_unlock in check_ref_cleanup
Btrfs: setup inode location during btrfs_init_inode_locked
Btrfs: don't use ram_bytes for uncompressed inline items
Btrfs: fix btrfs_search_slot_for_read backwards iteration
Btrfs: do not export ulist functions
Btrfs: rework ulist with list+rb_tree
Btrfs: fix memory leaks on walking backrefs failure
Btrfs: fix send file hole detection leading to data corruption
Btrfs: add a reschedule point in btrfs_find_all_roots()
Btrfs: make send's file extent item search more efficient
Btrfs: fix to catch all errors when resolving indirect ref
Btrfs: fix protection between walking backrefs and root deletion
btrfs: fix warning while merging two adjacent extents
Btrfs: fix infinite path build loops in incremental send
btrfs: undo sysfs when open_ctree() fails
Btrfs: fix snprintf usage by send's gen_unique_name
btrfs: fix defrag 32-bit integer overflow
btrfs: sysfs: list the NO_HOLES feature
btrfs: sysfs: don't show reserved incompat feature
btrfs: call permission checks earlier in ioctls and return EPERM
...
Pull block IO driver changes from Jens Axboe:
- bcache update from Kent Overstreet.
- two bcache fixes from Nicholas Swenson.
- cciss pci init error fix from Andrew.
- underflow fix in the parallel IDE pg_write code from Dan Carpenter.
I'm sure the 1 (or 0) users of that are now happy.
- two PCI related fixes for sx8 from Jingoo Han.
- floppy init fix for first block read from Jiri Kosina.
- pktcdvd error return miss fix from Julia Lawall.
- removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from
Michael Opdenacker.
- comment typo fix for the loop driver from Olaf Hering.
- potential oops fix for null_blk from Raghavendra K T.
- two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing
an OOM problem and a problem with handling security locked conditions
* 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits)
mg_disk: Spelling s/finised/finished/
null_blk: Null pointer deference problem in alloc_page_buffers
mtip32xx: Correctly handle security locked condition
mtip32xx: Make SGL container per-command to eliminate high order dma allocation
drivers/block/loop.c: fix comment typo in loop_config_discard
drivers/block/cciss.c:cciss_init_one(): use proper errnos
drivers/block/paride/pg.c: underflow bug in pg_write()
drivers/block/sx8.c: remove unnecessary pci_set_drvdata()
drivers/block/sx8.c: use module_pci_driver()
floppy: bail out in open() if drive is not responding to block0 read
bcache: Fix auxiliary search trees for key size > cacheline size
bcache: Don't return -EINTR when insert finished
bcache: Improve bucket_prio() calculation
bcache: Add bch_bkey_equal_header()
bcache: update bch_bkey_try_merge
bcache: Move insert_fixup() to btree_keys_ops
bcache: Convert sorting to btree_keys
bcache: Convert debug code to btree_keys
bcache: Convert btree_iter to struct btree_keys
bcache: Refactor bset_tree sysfs stats
...
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
Flag BTRFS_ORDERED_TRUNCATED is a new one, update the tracepoint to
support it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
We use set_bit() to assign ordered extent's flags, but in the related
tracepoint we don't do the same thing, which makes the trace output
not to parse flags correctly.
Also, since the flags are bits stuff, we change to use __print_flags with
a 'delim' instead of __print_symbolic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
Highlights include:
- Stable fix for an infinite loop in RPC state machine
- Stable fix for a use after free situation in the NFSv4 trunking discovery
- Stable fix for error handling in the NFSv4 trunking discovery
- Stable fix for the page write update code
- Stable fix for the NFSv4.1 mount time security negotiation
- Stable fix for the NFSv4 open code.
- O_DIRECT locking fixes
- fix an Oops in the pnfs file commit code
- RPC layer needs finer grained handling of connection errors
- More RPC GSS upcall fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=abfY
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- stable fix for an infinite loop in RPC state machine
- stable fix for a use after free situation in the NFSv4 trunking discovery
- stable fix for error handling in the NFSv4 trunking discovery
- stable fix for the page write update code
- stable fix for the NFSv4.1 mount time security negotiation
- stable fix for the NFSv4 open code.
- O_DIRECT locking fixes
- fix an Oops in the pnfs file commit code
- RPC layer needs finer grained handling of connection errors
- more RPC GSS upcall fixes"
* tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (30 commits)
pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done
pnfs: fix BUG in filelayout_recover_commit_reqs
nfs4: fix discover_server_trunking use after free
NFSv4.1: Handle errors correctly in nfs41_walk_client_list
nfs: always make sure page is up-to-date before extending a write to cover the entire page
nfs: page cache invalidation for dio
nfs: take i_mutex during direct I/O reads
nfs: merge nfs_direct_write into nfs_file_direct_write
nfs: merge nfs_direct_read into nfs_file_direct_read
nfs: increment i_dio_count for reads, too
nfs: defer inode_dio_done call until size update is done
nfs: fix size updates for aio writes
nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME
NFSv4.1: Fix a race in nfs4_write_inode
NFSv4.1: Don't trust attributes if a pNFS LAYOUTCOMMIT is outstanding
point to the right include file in a comment (left over from a9004abc3)
NFS: dprintk() should not print negative fileids and inode numbers
nfs: fix dead code of ipv6_addr_scope
sunrpc: Fix infinite loop in RPC state machine
SUNRPC: Add tracepoint for socket errors
...
Pull networking updates from David Miller:
1) BPF debugger and asm tool by Daniel Borkmann.
2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.
3) Correct reciprocal_divide and update users, from Hannes Frederic
Sowa and Daniel Borkmann.
4) Currently we only have a "set" operation for the hw timestamp socket
ioctl, add a "get" operation to match. From Ben Hutchings.
5) Add better trace events for debugging driver datapath problems, also
from Ben Hutchings.
6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we
have a small send and a previous packet is already in the qdisc or
device queue, defer until TX completion or we get more data.
7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.
8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
Borkmann.
9) Share IP header compression code between Bluetooth and IEEE802154
layers, from Jukka Rissanen.
10) Fix ipv6 router reachability probing, from Jiri Benc.
11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.
12) Support tunneling in GRO layer, from Jerry Chu.
13) Allow bonding to be configured fully using netlink, from Scott
Feldman.
14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
already get the TCI. From Atzm Watanabe.
15) New "Heavy Hitter" qdisc, from Terry Lam.
16) Significantly improve the IPSEC support in pktgen, from Fan Du.
17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom
Herbert.
18) Add Proportional Integral Enhanced packet scheduler, from Vijay
Subramanian.
19) Allow openvswitch to mmap'd netlink, from Thomas Graf.
20) Key TCP metrics blobs also by source address, not just destination
address. From Christoph Paasch.
21) Support 10G in generic phylib. From Andy Fleming.
22) Try to short-circuit GRO flow compares using device provided RX
hash, if provided. From Tom Herbert.
The wireless and netfilter folks have been busy little bees too.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
net/cxgb4: Fix referencing freed adapter
ipv6: reallocate addrconf router for ipv6 address when lo device up
fib_frontend: fix possible NULL pointer dereference
rtnetlink: remove IFLA_BOND_SLAVE definition
rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
qlcnic: update version to 5.3.55
qlcnic: Enhance logic to calculate msix vectors.
qlcnic: Refactor interrupt coalescing code for all adapters.
qlcnic: Update poll controller code path
qlcnic: Interrupt code cleanup
qlcnic: Enhance Tx timeout debugging.
qlcnic: Use bool for rx_mac_learn.
bonding: fix u64 division
rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
sfc: Use the correct maximum TX DMA ring size for SFC9100
Add Shradha Shah as the sfc driver maintainer.
net/vxlan: Share RX skb de-marking and checksum checks with ovs
tulip: cleanup by using ARRAY_SIZE()
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
net/cxgb4: Don't retrieve stats during recovery
...
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
This patch-set includes the following major enhancement patches.
o support inline_data
o refactor bio operations such as merge operations and rw type assignment
o enhance the direct IO path
o enhance bio operations
o truncate a node page when it becomes obsolete
o add sysfs entries: small_discards, max_victim_search, and in-place-update
o add a sysfs entry to control max_victim_search
The other bug fixes are as follows.
o fix a bug in truncate_partial_nodes
o avoid warnings during sparse and build process
o fix error handling flows
o fix potential bit overflows
And, there are a bunch of cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=gVDh
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, a couple of sysfs entries were introduced to tune the
f2fs at runtime.
In addition, f2fs starts to support inline_data and improves the
read/write performance in some workloads by refactoring bio-related
flows.
This patch-set includes the following major enhancement patches.
- support inline_data
- refactor bio operations such as merge operations and rw type
assignment
- enhance the direct IO path
- enhance bio operations
- truncate a node page when it becomes obsolete
- add sysfs entries: small_discards, max_victim_search, and
in-place-update
- add a sysfs entry to control max_victim_search
The other bug fixes are as follows.
- fix a bug in truncate_partial_nodes
- avoid warnings during sparse and build process
- fix error handling flows
- fix potential bit overflows
And, there are a bunch of cleanups"
* tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (95 commits)
f2fs: drop obsolete node page when it is truncated
f2fs: introduce NODE_MAPPING for code consistency
f2fs: remove the orphan block page array
f2fs: add help function META_MAPPING
f2fs: move a branch for code redability
f2fs: call mark_inode_dirty to flush dirty pages
f2fs: clean checkpatch warnings
f2fs: missing REQ_META and REQ_PRIO when sync_meta_pages(META_FLUSH)
f2fs: avoid f2fs_balance_fs call during pageout
f2fs: add delimiter to seperate name and value in debug phrase
f2fs: use spinlock rather than mutex for better speed
f2fs: move alloc new orphan node out of lock protection region
f2fs: move grabing orphan pages out of protection region
f2fs: remove the needless parameter of f2fs_wait_on_page_writeback
f2fs: update documents and a MAINTAINERS entry
f2fs: add a sysfs entry to control max_victim_search
f2fs: improve write performance under frequent fsync calls
f2fs: avoid to read inline data except first page
f2fs: avoid to left uninitialized data in page when read inline data
f2fs: fix truncate_partial_nodes bug
...
triggers by Tom Zanussi. A trigger is a way to enable an action when an
event is hit. The actions are:
o trace on/off - enable or disable tracing
o snapshot - save the current trace buffer in the snapshot
o stacktrace - dump the current stack trace to the ringbuffer
o enable/disable events - enable or disable another event
Namhyung Kim added updates to the tracing uprobes code. Having the
uprobes add support for fetch methods.
The rest are various bug fixes with the new code, and minor ones for
the old code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJS3Z9fAAoJEKQekfcNnQGuFf0H/0CteaN+BJjpif6Tnxia15Sp
pcftzU0lgqfNzsfitmbjiVTgXWqCghoZo8UI9tQZvBZ9wmDIxeXQR73uoBgVlSCQ
ovyBO/R8r+lq+7EsDCwntZvrLbcdn6s/jzoruRvt7r35ghK5pH81DNR1BOzTQBhW
x+361Xtc13aok7N7JN8KR96VDUP9f8KU6PWqJ5lgS2Zl+wbVw6b0p8OV8IMCHczP
MdYrx8y4Jv4QWW7rMShAAVBe9qJQ56JWiWA17ysa4kY8BkKQ7QtlEFr+r1YY0nX5
67brXiL8u0NFzRx5y2VRpGc25BbImnVBFpoLQ5Itluq9OdZE3aOQubzXlY70R6g=
=Hkho
-----END PGP SIGNATURE-----
Merge tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This pull request has a new feature to ftrace, namely the trace event
triggers by Tom Zanussi. A trigger is a way to enable an action when
an event is hit. The actions are:
o trace on/off - enable or disable tracing
o snapshot - save the current trace buffer in the snapshot
o stacktrace - dump the current stack trace to the ringbuffer
o enable/disable events - enable or disable another event
Namhyung Kim added updates to the tracing uprobes code. Having the
uprobes add support for fetch methods.
The rest are various bug fixes with the new code, and minor ones for
the old code"
* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
tracing: Fix buggered tee(2) on tracing_pipe
tracing: Have trace buffer point back to trace_array
ftrace: Fix synchronization location disabling and freeing ftrace_ops
ftrace: Have function graph only trace based on global_ops filters
ftrace: Synchronize setting function_trace_op with ftrace_trace_function
tracing: Show available event triggers when no trigger is set
tracing: Consolidate event trigger code
tracing: Fix counter for traceon/off event triggers
tracing: Remove double-underscore naming in syscall trigger invocations
tracing/kprobes: Add trace event trigger invocations
tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
tracing/uprobes: Add @+file_offset fetch method
uprobes: Allocate ->utask before handler_chain() for tracing handlers
tracing/uprobes: Add support for full argument access methods
tracing/uprobes: Fetch args before reserving a ring buffer
tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
tracing/probes: Implement 'memory' fetch method for uprobes
tracing/probes: Add fetch{,_size} member into deref fetch method
tracing/probes: Move 'symbol' fetch method to kprobes
tracing/probes: Implement 'stack' fetch method for uprobes
...
The broad goal of the series is to improve allocation success rates for
huge pages through memory compaction, while trying not to increase the
compaction overhead. The original objective was to reintroduce
capturing of high-order pages freed by the compaction, before they are
split by concurrent activity. However, several bugs and opportunities
for simple improvements were found in the current implementation, mostly
through extra tracepoints (which are however too ugly for now to be
considered for sending).
The patches mostly deal with two mechanisms that reduce compaction
overhead, which is caching the progress of migrate and free scanners,
and marking pageblocks where isolation failed to be skipped during
further scans.
Patch 1 (from mgorman) adds tracepoints that allow calculate time spent in
compaction and potentially debug scanner pfn values.
Patch 2 encapsulates the some functionality for handling deferred compactions
for better maintainability, without a functional change
type is not determined without being actually needed.
Patch 3 fixes a bug where cached scanner pfn's are sometimes reset only after
they have been read to initialize a compaction run.
Patch 4 fixes a bug where scanners meeting is sometimes not properly detected
and can lead to multiple compaction attempts quitting early without
doing any work.
Patch 5 improves the chances of sync compaction to process pageblocks that
async compaction has skipped due to being !MIGRATE_MOVABLE.
Patch 6 improves the chances of sync direct compaction to actually do anything
when called after async compaction fails during allocation slowpath.
The impact of patches were validated using mmtests's stress-highalloc
benchmark with mmtests's stress-highalloc benchmark on a x86_64 machine
with 4GB memory.
Due to instability of the results (mostly related to the bugs fixed by
patches 2 and 3), 10 iterations were performed, taking min,mean,max
values for success rates and mean values for time and vmstat-based
metrics.
First, the default GFP_HIGHUSER_MOVABLE allocations were tested with the
patches stacked on top of v3.13-rc2. Patch 2 is OK to serve as baseline
due to no functional changes in 1 and 2. Comments below.
stress-highalloc
3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2
2-nothp 3-nothp 4-nothp 5-nothp 6-nothp
Success 1 Min 9.00 ( 0.00%) 10.00 (-11.11%) 43.00 (-377.78%) 43.00 (-377.78%) 33.00 (-266.67%)
Success 1 Mean 27.50 ( 0.00%) 25.30 ( 8.00%) 45.50 (-65.45%) 45.90 (-66.91%) 46.30 (-68.36%)
Success 1 Max 36.00 ( 0.00%) 36.00 ( 0.00%) 47.00 (-30.56%) 48.00 (-33.33%) 52.00 (-44.44%)
Success 2 Min 10.00 ( 0.00%) 8.00 ( 20.00%) 46.00 (-360.00%) 45.00 (-350.00%) 35.00 (-250.00%)
Success 2 Mean 26.40 ( 0.00%) 23.50 ( 10.98%) 47.30 (-79.17%) 47.60 (-80.30%) 48.10 (-82.20%)
Success 2 Max 34.00 ( 0.00%) 33.00 ( 2.94%) 48.00 (-41.18%) 50.00 (-47.06%) 54.00 (-58.82%)
Success 3 Min 65.00 ( 0.00%) 63.00 ( 3.08%) 85.00 (-30.77%) 84.00 (-29.23%) 85.00 (-30.77%)
Success 3 Mean 76.70 ( 0.00%) 70.50 ( 8.08%) 86.20 (-12.39%) 85.50 (-11.47%) 86.00 (-12.13%)
Success 3 Max 87.00 ( 0.00%) 86.00 ( 1.15%) 88.00 ( -1.15%) 87.00 ( 0.00%) 87.00 ( 0.00%)
3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2
2-nothp 3-nothp 4-nothp 5-nothp 6-nothp
User 6437.72 6459.76 5960.32 5974.55 6019.67
System 1049.65 1049.09 1029.32 1031.47 1032.31
Elapsed 1856.77 1874.48 1949.97 1994.22 1983.15
3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2
2-nothp 3-nothp 4-nothp 5-nothp 6-nothp
Minor Faults 253952267 254581900 250030122 250507333 250157829
Major Faults 420 407 506 530 530
Swap Ins 4 9 9 6 6
Swap Outs 398 375 345 346 333
Direct pages scanned 197538 189017 298574 287019 299063
Kswapd pages scanned 1809843 1801308 1846674 1873184 1861089
Kswapd pages reclaimed 1806972 1798684 1844219 1870509 1858622
Direct pages reclaimed 197227 188829 298380 286822 298835
Kswapd efficiency 99% 99% 99% 99% 99%
Kswapd velocity 953.382 970.449 952.243 934.569 922.286
Direct efficiency 99% 99% 99% 99% 99%
Direct velocity 104.058 101.832 153.961 143.200 148.205
Percentage direct scans 9% 9% 13% 13% 13%
Zone normal velocity 347.289 359.676 348.063 339.933 332.983
Zone dma32 velocity 710.151 712.605 758.140 737.835 737.507
Zone dma velocity 0.000 0.000 0.000 0.000 0.000
Page writes by reclaim 557.600 429.000 353.600 426.400 381.800
Page writes file 159 53 7 79 48
Page writes anon 398 375 345 346 333
Page reclaim immediate 825 644 411 575 420
Sector Reads 2781750 2769780 2878547 2939128 2910483
Sector Writes 12080843 12083351 12012892 12002132 12010745
Page rescued immediate 0 0 0 0 0
Slabs scanned 15756541545344 1778406 1786700 1794073
Direct inode steals 9657 10037 15795 14104 14645
Kswapd inode steals 46857 46335 50543 50716 51796
Kswapd skipped wait 0 0 0 0 0
THP fault alloc 97 91 81 71 77
THP collapse alloc 456 506 546 544 565
THP splits 6 5 5 4 4
THP fault fallback 0 1 0 0 0
THP collapse fail 14 14 12 13 12
Compaction stalls 1006 980 1537 1536 1548
Compaction success 303 284 562 559 578
Compaction failures 702 696 974 976 969
Page migrate success 1177325 1070077 3927538 3781870 3877057
Page migrate failure 0 0 0 0 0
Compaction pages isolated 2547248 2306457 8301218 8008500 8200674
Compaction migrate scanned 42290478 38832618 153961130 154143900 159141197
Compaction free scanned 89199429 79189151 356529027 351943166 356326727
Compaction cost 1566 1426 5312 5156 5294
NUMA PTE updates 0 0 0 0 0
NUMA hint faults 0 0 0 0 0
NUMA hint local faults 0 0 0 0 0
NUMA hint local percent 100 100 100 100 100
NUMA pages migrated 0 0 0 0 0
AutoNUMA cost 0 0 0 0 0
Observations:
- The "Success 3" line is allocation success rate with system idle
(phases 1 and 2 are with background interference). I used to get stable
values around 85% with vanilla 3.11. The lower min and mean values came
with 3.12. This was bisected to commit 81c0a2bb ("mm: page_alloc: fair
zone allocator policy") As explained in comment for patch 3, I don't
think the commit is wrong, but that it makes the effect of compaction
bugs worse. From patch 3 onwards, the results are OK and match the 3.11
results.
- Patch 4 also clearly helps phases 1 and 2, and exceeds any results
I've seen with 3.11 (I didn't measure it that thoroughly then, but it
was never above 40%).
- Compaction cost and number of scanned pages is higher, especially due
to patch 4. However, keep in mind that patches 3 and 4 fix existing
bugs in the current design of compaction overhead mitigation, they do
not change it. If overhead is found unacceptable, then it should be
decreased differently (and consistently, not due to random conditions)
than the current implementation does. In contrast, patches 5 and 6
(which are not strictly bug fixes) do not increase the overhead (but
also not success rates). This might be a limitation of the
stress-highalloc benchmark as it's quite uniform.
Another set of results is when configuring stress-highalloc t allocate
with similar flags as THP uses:
(GFP_HIGHUSER_MOVABLE|__GFP_NOMEMALLOC|__GFP_NORETRY|__GFP_NO_KSWAPD)
stress-highalloc
3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2
2-thp 3-thp 4-thp 5-thp 6-thp
Success 1 Min 2.00 ( 0.00%) 7.00 (-250.00%) 18.00 (-800.00%) 19.00 (-850.00%) 26.00 (-1200.00%)
Success 1 Mean 19.20 ( 0.00%) 17.80 ( 7.29%) 29.20 (-52.08%) 29.90 (-55.73%) 32.80 (-70.83%)
Success 1 Max 27.00 ( 0.00%) 29.00 ( -7.41%) 35.00 (-29.63%) 36.00 (-33.33%) 37.00 (-37.04%)
Success 2 Min 3.00 ( 0.00%) 8.00 (-166.67%) 21.00 (-600.00%) 21.00 (-600.00%) 32.00 (-966.67%)
Success 2 Mean 19.30 ( 0.00%) 17.90 ( 7.25%) 32.20 (-66.84%) 32.60 (-68.91%) 35.70 (-84.97%)
Success 2 Max 27.00 ( 0.00%) 30.00 (-11.11%) 36.00 (-33.33%) 37.00 (-37.04%) 39.00 (-44.44%)
Success 3 Min 62.00 ( 0.00%) 62.00 ( 0.00%) 85.00 (-37.10%) 75.00 (-20.97%) 64.00 ( -3.23%)
Success 3 Mean 66.30 ( 0.00%) 65.50 ( 1.21%) 85.60 (-29.11%) 83.40 (-25.79%) 83.50 (-25.94%)
Success 3 Max 70.00 ( 0.00%) 69.00 ( 1.43%) 87.00 (-24.29%) 86.00 (-22.86%) 87.00 (-24.29%)
3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2
2-thp 3-thp 4-thp 5-thp 6-thp
User 6547.93 6475.85 6265.54 6289.46 6189.96
System 1053.42 1047.28 1043.23 1042.73 1038.73
Elapsed 1835.43 1821.96 1908.67 1912.74 1956.38
3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2
2-thp 3-thp 4-thp 5-thp 6-thp
Minor Faults 256805673 253106328 253222299 249830289 251184418
Major Faults 395 375 423 434 448
Swap Ins 12 10 10 12 9
Swap Outs 530 537 487 455 415
Direct pages scanned 71859 86046 153244 152764 190713
Kswapd pages scanned 1900994 1870240 1898012 1892864 1880520
Kswapd pages reclaimed 1897814 1867428 1894939 1890125 1877924
Direct pages reclaimed 71766 85908 153167 152643 190600
Kswapd efficiency 99% 99% 99% 99% 99%
Kswapd velocity 1029.000 1067.782 1000.091 991.049 951.218
Direct efficiency 99% 99% 99% 99% 99%
Direct velocity 38.897 49.127 80.747 79.983 96.468
Percentage direct scans 3% 4% 7% 7% 9%
Zone normal velocity 351.377 372.494 348.910 341.689 335.310
Zone dma32 velocity 716.520 744.414 731.928 729.343 712.377
Zone dma velocity 0.000 0.000 0.000 0.000 0.000
Page writes by reclaim 669.300 604.000 545.700 538.900 429.900
Page writes file 138 66 58 83 14
Page writes anon 530 537 487 455 415
Page reclaim immediate 806 655 772 548 517
Sector Reads 2711956 2703239 2811602 2818248 2839459
Sector Writes 12163238 12018662 12038248 11954736 11994892
Page rescued immediate 0 0 0 0 0
Slabs scanned 1385088 1388364 1507968 1513292 1558656
Direct inode steals 1739 2564 4622 5496 6007
Kswapd inode steals 47461 46406 47804 48013 48466
Kswapd skipped wait 0 0 0 0 0
THP fault alloc 110 82 84 69 70
THP collapse alloc 445 482 467 462 539
THP splits 6 5 4 5 3
THP fault fallback 3 0 0 0 0
THP collapse fail 15 14 14 14 13
Compaction stalls 659 685 1033 1073 1111
Compaction success 222 225 410 427 456
Compaction failures 436 460 622 646 655
Page migrate success 446594 439978 1085640 1095062 1131716
Page migrate failure 0 0 0 0 0
Compaction pages isolated 1029475 1013490 2453074 2482698 2565400
Compaction migrate scanned 9955461 11344259 24375202 27978356 30494204
Compaction free scanned 27715272 28544654 80150615 82898631 85756132
Compaction cost 552 555 1344 1379 1436
NUMA PTE updates 0 0 0 0 0
NUMA hint faults 0 0 0 0 0
NUMA hint local faults 0 0 0 0 0
NUMA hint local percent 100 100 100 100 100
NUMA pages migrated 0 0 0 0 0
AutoNUMA cost 0 0 0 0 0
There are some differences from the previous results for THP-like allocations:
- Here, the bad result for unpatched kernel in phase 3 is much more
consistent to be between 65-70% and not related to the "regression" in
3.12. Still there is the improvement from patch 4 onwards, which brings
it on par with simple GFP_HIGHUSER_MOVABLE allocations.
- Compaction costs have increased, but nowhere near as much as the
non-THP case. Again, the patches should be worth the gained
determininsm.
- Patches 5 and 6 somewhat increase the number of migrate-scanned pages.
This is most likely due to __GFP_NO_KSWAPD flag, which means the cached
pfn's and pageblock skip bits are not reset by kswapd that often (at
least in phase 3 where no concurrent activity would wake up kswapd) and
the patches thus help the sync-after-async compaction. It doesn't
however show that the sync compaction would help so much with success
rates, which can be again seen as a limitation of the benchmark
scenario.
This patch (of 6):
Add two tracepoints for compaction begin and end of a zone. Using this it
is possible to calculate how much time a workload is spending within
compaction and potentially debug problems related to cached pfns for
scanning. In combination with the direct reclaim and slab trace points it
should be possible to estimate most allocation-related overhead for a
workload.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds three tracepoints
o trace_sched_move_numa when a task is moved to a node
o trace_sched_swap_numa when a task is swapped with another task
o trace_sched_stick_numa when a numa-related migration fails
The tracepoints allow the NUMA scheduler activity to be monitored and the
following high-level metrics can be calculated
o NUMA migrated stuck nr trace_sched_stick_numa
o NUMA migrated idle nr trace_sched_move_numa
o NUMA migrated swapped nr trace_sched_swap_numa
o NUMA local swapped trace_sched_swap_numa src_nid == dst_nid (should never happen)
o NUMA remote swapped trace_sched_swap_numa src_nid != dst_nid (should == NUMA migrated swapped)
o NUMA group swapped trace_sched_swap_numa src_ngid == dst_ngid
Maybe a small number of these are acceptable
but a high number would be a major surprise.
It would be even worse if bounces are frequent.
o NUMA avg task migs. Average number of migrations for tasks
o NUMA stddev task mig Self-explanatory
o NUMA max task migs. Maximum number of migrations for a single task
In general the intent of the tracepoints is to help diagnose problems
where automatic NUMA balancing appears to be doing an excessive amount
of useless work.
[akpm@linux-foundation.org: remove semicolon-after-if, repair coding-style]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A low local/remote numa hinting fault ratio is potentially explained by
failed migrations. This patch adds a tracepoint that fires when
migration fails due to migration rate limitation.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add perf trace event "power:pstate_sample" to report driver state to
aid in diagnosing issues reported against intel_pstate.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The existing net/netif_rx and net/netif_receive_skb trace events
provide little information about the skb, nor do they indicate how it
entered the stack.
Add trace events at entry of each of the exported functions, including
most fields that are likely to be interesting for debugging driver
datapath behaviour. Split netif_rx() and netif_receive_skb() so that
internal calls are not traced.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing net/net_dev_xmit trace event provides little information
about the skb that has been passed to the driver, and it is not
simple to add more since the skb may already have been freed at
the point the event is emitted.
Add a separate trace event before the skb is passed to the driver,
including most fields that are likely to be interesting for debugging
driver datapath behaviour.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maarten Lankhorst