When the ehci-hcd driver prepares a control URB, it tests for a
zero-length data stage by looking at the transfer_dma value instead of
the transfer_buffer_length. (In fact it does this even for non-control
URBs, which is an additional aspect of the same bug.)
However, under certain circumstances it's possible for transfer_dma to
be 0 while transfer_buffer_length is non-zero. This can happen when a
freshly allocated page (mapped to address 0 and marked Copy-On-Write,
but never written to) is used as the source buffer for an OUT transfer.
This patch (as598) fixes the problem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The attached patch makes a cleanup of isp116x-hcd. Most of the volume of
the patch comes from 2 sources: moving the code around to get rid of a
few function prototypes and reworking register dumping functions/macros.
Among other things, switched over from using procfs to debugfs.
Cleanup. The following changes were made:
- Rework register dumping code so it can be used for dumping
to both syslog and debugfs.
- Switch from procfs to debugfs..
- Die gracefully on Unrecoverable Error interrupt.
- Fix memory leak in isp116x_urb_enqueue(), if HC happens to
die in a narrow time window.
- Fix a 'sparce' warning (unnecessary cast).
- Report Devices Removable for root hub ports by default
(was Devices Permanently Attached).
- Move bus suspend/resume functions down in code to get rid of
a few function prototypes.
- A number of one-line cleanups.
- Add an entry to MAINTAINERS.
Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
MAINTAINERS | 6
drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++-------------------------
drivers/usb/host/isp116x.h | 83 +++++--
3 files changed, 230 insertions(+), 288 deletions(-)
Until now the isp116x-hcd had no support to reinitialize the HC on
resume, if the controller lost its state during suspend. This patch,
generated against your Oct 26 git tree, adds that support. The patch is
basically the same as the one tested by Ivan Kalatchev, who reported the
problem, on 2.6.13.
Please apply,
Support reinitializing the isp116x host controller from scratch on
resume, if the controller has lost its state.
Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this patch by David converts the sending queue of the CDC ACM driver
to a queue of URBs. This is needed for quicker devices. Please apply.
Signed-Off-By: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/class/cdc-acm.c | 229 ++++++++++++++++++++++++++++++--------------
drivers/usb/class/cdc-acm.h | 33 +++++-
2 files changed, 185 insertions(+), 77 deletions(-)
Add power management functions for the pxa27x USB OHCI host controller.
This is a totally rewritten version of the patch by Nicolas Pitre and
Todd Poynor which accounts for recent USB changes.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To allow multiple platforms to use the PXA27x OHCI driver, the platform
code needs to be moved into the board specific files in
arch/arm/mach-pxa. This patch does this for mainstone and adds
preliminary hooks to allow other boards to use the driver.
This has been compile tested for mainstone and successfully run on Spitz
(Sharp Zaurus SL-C3000) with the addition of an appropriate board
support file.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Modules: ALSA Core
Revert the nested-device patch to keep the compatibility with the
current HAL configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CC [M] net/ipv4/ipvs/ip_vs_conn.o
/pub/scm/linux/kernel/git/acme/net-2.6/net/ipv4/ipvs/ip_vs_conn.c: In
function 'ip_vs_conn_new':
/pub/scm/linux/kernel/git/acme/net-2.6/net/ipv4/ipvs/ip_vs_conn.c:606:
warning: implicit declaration of function 'net_ratelimit'
/pub/scm/linux/kernel/git/acme/net-2.6/net/ipv4/ipvs/ip_vs_conn.c: In
function 'ip_vs_random_dropentry':
/pub/scm/linux/kernel/git/acme/net-2.6/net/ipv4/ipvs/ip_vs_conn.c:810:
warning: implicit declaration of function 'net_random'
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
CC net/ipv4/tcp_ipv4.o
/pub/scm/linux/kernel/git/acme/net-2.6/net/ipv4/tcp_ipv4.c:665: warning:
'syn_flood_warning' defined but not used
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
TCP inline usage cleanup:
* get rid of inline in several places
* replace __inline__ with inline where possible
* move functions used in one file out of tcp.h
* let compiler decide on used once cases
On x86_64:
text data bss dec hex filename
3594701 648348 567400 4810449 4966d1 vmlinux.orig
3593133 648580 567400 4809113 496199 vmlinux
On sparc64:
text data bss dec hex filename
2538278 406152 530392 3474822 350586 vmlinux.ORIG
2536382 406384 530392 3473158 34ff06 vmlinux
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Stephen Hemminger <shemminger@osdl.org>
is_multicast_ether_addr() accepts broadcast too, so the
is_broadcast_ether_addr() calls are redundant.
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for multicast shouldn't exclude broadcast type addresses.
This reverts the incorrect change done in 2.6.13.
The broadcast address is a multicast address and should be excluded
from being a valid_ether_address for use in bridging or device address.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Need this to fix build of fib_trie in net-2.6.16 (rebased) tree.
The code needs the new inet_make_mask inline.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the conversions from memcmp to compare_ether_addr is incorrect.
We need to do relative comparison to determine min MAC address to
use in bridge id.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CCID should be notified of packet reception only when a packet is
valid. Therefore, the ACK vector needs to be processed before
notifying the CCID. Also, the CCID might need information provided by
the ACK vector.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ACK vectors are used, each packet with an ACK should contain an ACK
vector. The only exception currently is response packets. It
probably is not a good idea to store ACK vector state before the
connection is completed (to help protect from syn floods).
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When packets are received, the connection is either in DCCP_OPEN
[fast-path] or it isn't. If it's not [e.g. DCCP_PARTOPEN] upper
layers will perform sanity checks and parse options. If it is in
DCCP_OPEN, dccp_rcv_established() will do it. It is important not to
re-parse options in dccp_rcv_established() when it is not called from
the fast-path. Else, fore example, the ack vector will be added twice
and the CCID will see the packet twice.
The solution is to always enfore sanity checks from the upper layers.
When packets arrive in the fast-path, sanity checks will be performed
before calling dccp_rcv_established().
Note(acme): I rewrote the patch to achieve the same result but keeping
dccp_rcv_established with the previous semantics and having it split
into __dccp_rcv_established, that doesn't does do any sanity check,
code in state != DCCP_OPEN use this lighter version as they already do
the sanity checks.
Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The attached patch makes DECnet routing only use routers from the same
area - rather than the highest rated router seen.
In theory there should not be an out-of-area router on a local network
but some networks are bridged rather than properly routed. VMS seems
to behave similarly: if I bring up a VMS node with no router then it
can't see anything else on the global network.
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Roberto Nibali <ratz@drugphish.ch>
The attached patch (against current -GIT) is a cleanup patch which does
following:
o lookup debug messages shifted back to 9
o added more informational value to flags and refcnt since those
entries can be in multiple referenced structures
o cleanup 80 char violation
It's the prepatch to the session pool implementation and helps very much
to debug and monitor important variables and structures regarding the
threshold limitation and persistency without the thousands of lookup
messages which noone is interested in.
Signed-off-by: Horms <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turning struct iphdr::tot_len into __be16 added sparse warning.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all network protocols need to call dev_ioctl as the default
fallback in their ioctl implementations. This patch adds a fallback
to dev_ioctl to sock_ioctl if the protocol returned -ENOIOCTLCMD.
This way all the procotol ioctl handlers can be simplified and we don't
need to export dev_ioctl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
lock_sock is needed only in very few cases, so do it there instead of
around the switch statement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Benjamin LaHaise <bcrl@kvack.org>
In af_unix, a rwlock is used to protect internal state. At least on my
P4 with HT it is faster to use a spinlock due to the simpler memory
barrier used to unlock. This patch raises bw_unix to ~690K/s.
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Benjamin LaHaise <bcrl@kvack.org>
In __alloc_skb(), the use of skb_shinfo() which casts a u8 * to the
shared info structure results in gcc being forced to do a reload of the
pointer since it has no information on possible aliasing. Fix this by
using a pointer to refer to skb_shared_info.
By initializing skb_shared_info sequentially, the write combining buffers
can reduce the number of memory transactions to a single write. Reorder
the initialization in __alloc_skb() to match the structure definition.
There is also an alignment issue on 64 bit systems with skb_shared_info
by converting nr_frags to a short everything packs up nicely.
Also, pass the slab cache pointer according to the fclone flag instead
of using two almost identical function calls.
This raises bw_unix performance up to a peak of 707KB/s when combined
with the spinlock patch. It should help other networking protocols, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
And actually, with this, the whole pppox layer can basically
be removed and subsumed into pppoe.c, no other pppox sub-protocol
implementation exists and we've had this thing for at least 4
years.
Signed-off-by: David S. Miller <davem@davemloft.net>
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.
Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its common enough to to justify that, TCP still can't use it as it has the
prequeueing stuff, still to be made generic in the not so distant future :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mid-term I plan to restructure the file_operations so that we don't need
to have all these duplicate aio and vectored versions. This patch is
a small step in that direction but also a worthwile cleanup on it's own:
(1) introduce a alloc_sock_iocb helper that encapsulates allocating a
proper sock_iocb
(2) add do_sock_read and do_sock_write helpers for common read/write
code
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It needs to return zero now that it is an initcall.
Also, net/nonet.c no longer needs a dummy sock_init().
Signed-off-by: David S. Miller <davem@davemloft.net>
static variables should not be explicitly initialised to 0. This causes
them to be placed in .data instead of .bss. This patch de-initialises 3
static variables in net/core/pktgen.c.
There are approximately 800 more such variables in the source tree
(2.6.15rc5). If there is more interrest I'd be willing to track down the
rest of these as well and de-initialise them as well.
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that some of 'struct proto_ops' used in the kernel may share
a cache line used by locks or other heavily modified data. (default
linker alignement is 32 bytes, and L1_CACHE_LINE is 64 or 128 at
least)
This patch makes sure a 'struct proto_ops' can be declared as const,
so that all cpus can share all parts of it without false sharing.
This is not mandatory : a driver can still use a read/write structure
if it needs to (and eventually a __read_mostly)
I made a global stubstitute to change all existing occurences to make
them const.
This should reduce the possibility of false sharing on SMP, and
speedup some socket system calls.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sock_init can be done as a core_initcall instead of calling
it directly in init/main.c
Also I removed an out of date #ifdef.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to set/get heartbeat interval, maximum number of
retransmissions, pathmtu, sackdelay time for a particular transport/
association/socket as per the latest SCTP sockets api draft11.
Signed-off-by: Frank Filz <ffilz@us.ibm.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace cube root algorithim with a faster version using Newton-Raphson.
Surprisingly, doing the scaled div64_64 is faster than a true 64 bit
division on 64 bit CPU's.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revised version of patch to pre-compute values for TCP cubic.
* d32,d64 replaced with descriptive names
* cube_factor replaces
srtt[scaled by count] / HZ * ((1 << (10+2*BICTCP_HZ)) / bic_scale)
* beta_scale replaces
8*(BICTCP_BETA_SCALE+beta)/3/(BICTCP_BETA_SCALE-beta);
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is a new feature for netem in 2.6.16. It adds the ability to
randomly corrupt packets with netem. A version was done by
Hagen Paul Pfeifer, but I redid it to handle the cases of backwards
compatibility with netlink interface and presence of hardware checksum
offload. It is useful for testing hardware offload in devices.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Stern